xref: /linux/drivers/net/ethernet/xilinx/ll_temac.h (revision 0526b56cbc3c489642bd6a5fe4b718dea7ef0ee8)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 
3 #ifndef XILINX_LL_TEMAC_H
4 #define XILINX_LL_TEMAC_H
5 
6 #include <linux/netdevice.h>
7 #include <linux/of.h>
8 #include <linux/spinlock.h>
9 
10 #ifdef CONFIG_PPC_DCR
11 #include <asm/dcr.h>
12 #include <asm/dcr-regs.h>
13 #endif
14 
15 /* packet size info */
16 #define XTE_HDR_SIZE			14      /* size of Ethernet header */
17 #define XTE_TRL_SIZE			4       /* size of Ethernet trailer (FCS) */
18 #define XTE_JUMBO_MTU			9000
19 #define XTE_MAX_JUMBO_FRAME_SIZE	(XTE_JUMBO_MTU + XTE_HDR_SIZE + XTE_TRL_SIZE)
20 
21 /*  Configuration options */
22 
23 /*  Accept all incoming packets.
24  *  This option defaults to disabled (cleared)
25  */
26 #define XTE_OPTION_PROMISC                      (1 << 0)
27 /*  Jumbo frame support for Tx & Rx.
28  *  This option defaults to disabled (cleared)
29  */
30 #define XTE_OPTION_JUMBO                        (1 << 1)
31 /*  VLAN Rx & Tx frame support.
32  *  This option defaults to disabled (cleared)
33  */
34 #define XTE_OPTION_VLAN                         (1 << 2)
35 /*  Enable recognition of flow control frames on Rx
36  *  This option defaults to enabled (set)
37  */
38 #define XTE_OPTION_FLOW_CONTROL                 (1 << 4)
39 /*  Strip FCS and PAD from incoming frames.
40  *  Note: PAD from VLAN frames is not stripped.
41  *  This option defaults to disabled (set)
42  */
43 #define XTE_OPTION_FCS_STRIP                    (1 << 5)
44 /*  Generate FCS field and add PAD automatically for outgoing frames.
45  *  This option defaults to enabled (set)
46  */
47 #define XTE_OPTION_FCS_INSERT                   (1 << 6)
48 /*  Enable Length/Type error checking for incoming frames. When this option is
49  *  set, the MAC will filter frames that have a mismatched type/length field
50  *  and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these
51  *  types of frames are encountered. When this option is cleared, the MAC will
52  *  allow these types of frames to be received.
53  *  This option defaults to enabled (set)
54  */
55 #define XTE_OPTION_LENTYPE_ERR                  (1 << 7)
56 /*  Enable the transmitter.
57  *  This option defaults to enabled (set)
58  */
59 #define XTE_OPTION_TXEN                         (1 << 11)
60 /*  Enable the receiver
61  *  This option defaults to enabled (set)
62  */
63 #define XTE_OPTION_RXEN                         (1 << 12)
64 
65 /*  Default options set when device is initialized or reset */
66 #define XTE_OPTION_DEFAULTS                     \
67 	(XTE_OPTION_TXEN |                          \
68 	 XTE_OPTION_FLOW_CONTROL |                  \
69 	 XTE_OPTION_RXEN)
70 
71 /* XPS_LL_TEMAC SDMA registers definition */
72 
73 #define TX_NXTDESC_PTR      0x00            /* r */
74 #define TX_CURBUF_ADDR      0x01            /* r */
75 #define TX_CURBUF_LENGTH    0x02            /* r */
76 #define TX_CURDESC_PTR      0x03            /* rw */
77 #define TX_TAILDESC_PTR     0x04            /* rw */
78 #define TX_CHNL_CTRL        0x05            /* rw */
79 /*
80  *  0:7      24:31       IRQTimeout
81  *  8:15     16:23       IRQCount
82  *  16:20    11:15       Reserved
83  *  21       10          0
84  *  22       9           UseIntOnEnd
85  *  23       8           LdIRQCnt
86  *  24       7           IRQEn
87  *  25:28    3:6         Reserved
88  *  29       2           IrqErrEn
89  *  30       1           IrqDlyEn
90  *  31       0           IrqCoalEn
91  */
92 #define CHNL_CTRL_IRQ_IOE       (1 << 9)
93 #define CHNL_CTRL_IRQ_EN        (1 << 7)
94 #define CHNL_CTRL_IRQ_ERR_EN    (1 << 2)
95 #define CHNL_CTRL_IRQ_DLY_EN    (1 << 1)
96 #define CHNL_CTRL_IRQ_COAL_EN   (1 << 0)
97 #define TX_IRQ_REG          0x06            /* rw */
98 /*
99  *  0:7      24:31       DltTmrValue
100  *  8:15     16:23       ClscCntrValue
101  *  16:17    14:15       Reserved
102  *  18:21    10:13       ClscCnt
103  *  22:23    8:9         DlyCnt
104  *  24:28    3::7        Reserved
105  *  29       2           ErrIrq
106  *  30       1           DlyIrq
107  *  31       0           CoalIrq
108  */
109 #define TX_CHNL_STS         0x07            /* r */
110 /*
111  *  0:9      22:31   Reserved
112  *  10       21      TailPErr
113  *  11       20      CmpErr
114  *  12       19      AddrErr
115  *  13       18      NxtPErr
116  *  14       17      CurPErr
117  *  15       16      BsyWr
118  *  16:23    8:15    Reserved
119  *  24       7       Error
120  *  25       6       IOE
121  *  26       5       SOE
122  *  27       4       Cmplt
123  *  28       3       SOP
124  *  29       2       EOP
125  *  30       1       EngBusy
126  *  31       0       Reserved
127  */
128 
129 #define RX_NXTDESC_PTR      0x08            /* r */
130 #define RX_CURBUF_ADDR      0x09            /* r */
131 #define RX_CURBUF_LENGTH    0x0a            /* r */
132 #define RX_CURDESC_PTR      0x0b            /* rw */
133 #define RX_TAILDESC_PTR     0x0c            /* rw */
134 #define RX_CHNL_CTRL        0x0d            /* rw */
135 /*
136  *  0:7      24:31       IRQTimeout
137  *  8:15     16:23       IRQCount
138  *  16:20    11:15       Reserved
139  *  21       10          0
140  *  22       9           UseIntOnEnd
141  *  23       8           LdIRQCnt
142  *  24       7           IRQEn
143  *  25:28    3:6         Reserved
144  *  29       2           IrqErrEn
145  *  30       1           IrqDlyEn
146  *  31       0           IrqCoalEn
147  */
148 #define RX_IRQ_REG          0x0e            /* rw */
149 #define IRQ_COAL        (1 << 0)
150 #define IRQ_DLY         (1 << 1)
151 #define IRQ_ERR         (1 << 2)
152 #define IRQ_DMAERR      (1 << 7)            /* this is not documented ??? */
153 /*
154  *  0:7      24:31       DltTmrValue
155  *  8:15     16:23       ClscCntrValue
156  *  16:17    14:15       Reserved
157  *  18:21    10:13       ClscCnt
158  *  22:23    8:9         DlyCnt
159  *  24:28    3::7        Reserved
160  */
161 #define RX_CHNL_STS         0x0f        /* r */
162 #define CHNL_STS_ENGBUSY    (1 << 1)
163 #define CHNL_STS_EOP        (1 << 2)
164 #define CHNL_STS_SOP        (1 << 3)
165 #define CHNL_STS_CMPLT      (1 << 4)
166 #define CHNL_STS_SOE        (1 << 5)
167 #define CHNL_STS_IOE        (1 << 6)
168 #define CHNL_STS_ERR        (1 << 7)
169 
170 #define CHNL_STS_BSYWR      (1 << 16)
171 #define CHNL_STS_CURPERR    (1 << 17)
172 #define CHNL_STS_NXTPERR    (1 << 18)
173 #define CHNL_STS_ADDRERR    (1 << 19)
174 #define CHNL_STS_CMPERR     (1 << 20)
175 #define CHNL_STS_TAILERR    (1 << 21)
176 /*
177  *  0:9      22:31   Reserved
178  *  10       21      TailPErr
179  *  11       20      CmpErr
180  *  12       19      AddrErr
181  *  13       18      NxtPErr
182  *  14       17      CurPErr
183  *  15       16      BsyWr
184  *  16:23    8:15    Reserved
185  *  24       7       Error
186  *  25       6       IOE
187  *  26       5       SOE
188  *  27       4       Cmplt
189  *  28       3       SOP
190  *  29       2       EOP
191  *  30       1       EngBusy
192  *  31       0       Reserved
193  */
194 
195 #define DMA_CONTROL_REG             0x10            /* rw */
196 #define DMA_CONTROL_RST                 (1 << 0)
197 #define DMA_TAIL_ENABLE                 (1 << 2)
198 
199 /* XPS_LL_TEMAC direct registers definition */
200 
201 #define XTE_RAF0_OFFSET              0x00
202 #define RAF0_RST                        (1 << 0)
203 #define RAF0_MCSTREJ                    (1 << 1)
204 #define RAF0_BCSTREJ                    (1 << 2)
205 #define XTE_TPF0_OFFSET              0x04
206 #define XTE_IFGP0_OFFSET             0x08
207 #define XTE_ISR0_OFFSET              0x0c
208 #define ISR0_HARDACSCMPLT               (1 << 0)
209 #define ISR0_AUTONEG                    (1 << 1)
210 #define ISR0_RXCMPLT                    (1 << 2)
211 #define ISR0_RXREJ                      (1 << 3)
212 #define ISR0_RXFIFOOVR                  (1 << 4)
213 #define ISR0_TXCMPLT                    (1 << 5)
214 #define ISR0_RXDCMLCK                   (1 << 6)
215 
216 #define XTE_IPR0_OFFSET              0x10
217 #define XTE_IER0_OFFSET              0x14
218 
219 #define XTE_MSW0_OFFSET              0x20
220 #define XTE_LSW0_OFFSET              0x24
221 #define XTE_CTL0_OFFSET              0x28
222 #define XTE_RDY0_OFFSET              0x2c
223 
224 #define XTE_RSE_MIIM_RR_MASK      0x0002
225 #define XTE_RSE_MIIM_WR_MASK      0x0004
226 #define XTE_RSE_CFG_RR_MASK       0x0020
227 #define XTE_RSE_CFG_WR_MASK       0x0040
228 #define XTE_RDY0_HARD_ACS_RDY_MASK  (0x10000)
229 
230 /* XPS_LL_TEMAC indirect registers offset definition */
231 
232 #define	XTE_RXC0_OFFSET			0x00000200 /* Rx configuration word 0 */
233 #define	XTE_RXC1_OFFSET			0x00000240 /* Rx configuration word 1 */
234 #define XTE_RXC1_RXRST_MASK		(1 << 31)  /* Receiver reset */
235 #define XTE_RXC1_RXJMBO_MASK		(1 << 30)  /* Jumbo frame enable */
236 #define XTE_RXC1_RXFCS_MASK		(1 << 29)  /* FCS not stripped */
237 #define XTE_RXC1_RXEN_MASK		(1 << 28)  /* Receiver enable */
238 #define XTE_RXC1_RXVLAN_MASK		(1 << 27)  /* VLAN enable */
239 #define XTE_RXC1_RXHD_MASK		(1 << 26)  /* Half duplex */
240 #define XTE_RXC1_RXLT_MASK		(1 << 25)  /* Length/type check disable */
241 
242 #define XTE_TXC_OFFSET			0x00000280 /*  Tx configuration */
243 #define XTE_TXC_TXRST_MASK		(1 << 31)  /* Transmitter reset */
244 #define XTE_TXC_TXJMBO_MASK		(1 << 30)  /* Jumbo frame enable */
245 #define XTE_TXC_TXFCS_MASK		(1 << 29)  /* Generate FCS */
246 #define XTE_TXC_TXEN_MASK		(1 << 28)  /* Transmitter enable */
247 #define XTE_TXC_TXVLAN_MASK		(1 << 27)  /* VLAN enable */
248 #define XTE_TXC_TXHD_MASK		(1 << 26)  /* Half duplex */
249 
250 #define XTE_FCC_OFFSET			0x000002C0 /* Flow control config */
251 #define XTE_FCC_RXFLO_MASK		(1 << 29)  /* Rx flow control enable */
252 #define XTE_FCC_TXFLO_MASK		(1 << 30)  /* Tx flow control enable */
253 
254 #define XTE_EMCFG_OFFSET		0x00000300 /* EMAC configuration */
255 #define XTE_EMCFG_LINKSPD_MASK		0xC0000000 /* Link speed */
256 #define XTE_EMCFG_HOSTEN_MASK		(1 << 26)  /* Host interface enable */
257 #define XTE_EMCFG_LINKSPD_10		0x00000000 /* 10 Mbit LINKSPD_MASK */
258 #define XTE_EMCFG_LINKSPD_100		(1 << 30)  /* 100 Mbit LINKSPD_MASK */
259 #define XTE_EMCFG_LINKSPD_1000		(1 << 31)  /* 1000 Mbit LINKSPD_MASK */
260 
261 #define XTE_GMIC_OFFSET			0x00000320 /* RGMII/SGMII config */
262 #define XTE_MC_OFFSET			0x00000340 /* MDIO configuration */
263 #define XTE_UAW0_OFFSET			0x00000380 /* Unicast address word 0 */
264 #define XTE_UAW1_OFFSET			0x00000384 /* Unicast address word 1 */
265 
266 #define XTE_MAW0_OFFSET			0x00000388 /* Multicast addr word 0 */
267 #define XTE_MAW1_OFFSET			0x0000038C /* Multicast addr word 1 */
268 #define XTE_AFM_OFFSET			0x00000390 /* Promiscuous mode */
269 #define XTE_AFM_EPPRM_MASK		(1 << 31)  /* Promiscuous mode enable */
270 
271 /* Interrupt Request status */
272 #define XTE_TIS_OFFSET			0x000003A0
273 #define TIS_FRIS			(1 << 0)
274 #define TIS_MRIS			(1 << 1)
275 #define TIS_MWIS			(1 << 2)
276 #define TIS_ARIS			(1 << 3)
277 #define TIS_AWIS			(1 << 4)
278 #define TIS_CRIS			(1 << 5)
279 #define TIS_CWIS			(1 << 6)
280 
281 #define XTE_TIE_OFFSET			0x000003A4 /* Interrupt enable */
282 
283 /* MII Management Control register (MGTCR) */
284 #define XTE_MGTDR_OFFSET		0x000003B0 /* MII data */
285 #define XTE_MIIMAI_OFFSET		0x000003B4 /* MII control */
286 
287 #define CNTLREG_WRITE_ENABLE_MASK   0x8000
288 #define CNTLREG_EMAC1SEL_MASK       0x0400
289 #define CNTLREG_ADDRESSCODE_MASK    0x03ff
290 
291 /* CDMAC descriptor status bit definitions */
292 
293 #define STS_CTRL_APP0_ERR         (1 << 31)
294 #define STS_CTRL_APP0_IRQONEND    (1 << 30)
295 /* undocumented */
296 #define STS_CTRL_APP0_STOPONEND   (1 << 29)
297 #define STS_CTRL_APP0_CMPLT       (1 << 28)
298 #define STS_CTRL_APP0_SOP         (1 << 27)
299 #define STS_CTRL_APP0_EOP         (1 << 26)
300 #define STS_CTRL_APP0_ENGBUSY     (1 << 25)
301 /* undocumented */
302 #define STS_CTRL_APP0_ENGRST      (1 << 24)
303 
304 #define TX_CONTROL_CALC_CSUM_MASK   1
305 
306 #define MULTICAST_CAM_TABLE_NUM 4
307 
308 /* TEMAC Synthesis features */
309 #define TEMAC_FEATURE_RX_CSUM  (1 << 0)
310 #define TEMAC_FEATURE_TX_CSUM  (1 << 1)
311 
312 /* TX/RX CURDESC_PTR points to first descriptor */
313 /* TX/RX TAILDESC_PTR points to last descriptor in linked list */
314 
315 /**
316  * struct cdmac_bd - LocalLink buffer descriptor format
317  *
318  * app0 bits:
319  *	0    Error
320  *	1    IrqOnEnd    generate an interrupt at completion of DMA  op
321  *	2    reserved
322  *	3    completed   Current descriptor completed
323  *	4    SOP         TX - marks first desc/ RX marks first desct
324  *	5    EOP         TX marks last desc/RX marks last desc
325  *	6    EngBusy     DMA is processing
326  *	7    reserved
327  *	8:31 application specific
328  */
329 struct cdmac_bd {
330 	u32 next;	/* Physical address of next buffer descriptor */
331 	u32 phys;
332 	u32 len;
333 	u32 app0;
334 	u32 app1;	/* TX start << 16 | insert */
335 	u32 app2;	/* TX csum */
336 	u32 app3;
337 	u32 app4;	/* skb for TX length for RX */
338 };
339 
340 struct temac_local {
341 	struct net_device *ndev;
342 	struct device *dev;
343 
344 	/* Connection to PHY device */
345 	struct device_node *phy_node;
346 	/* For non-device-tree devices */
347 	char phy_name[MII_BUS_ID_SIZE + 3];
348 	phy_interface_t phy_interface;
349 
350 	/* MDIO bus data */
351 	struct mii_bus *mii_bus;	/* MII bus reference */
352 
353 	/* IO registers, dma functions and IRQs */
354 	void __iomem *regs;
355 	void __iomem *sdma_regs;
356 #ifdef CONFIG_PPC_DCR
357 	dcr_host_t sdma_dcrs;
358 #endif
359 	u32 (*temac_ior)(struct temac_local *lp, int offset);
360 	void (*temac_iow)(struct temac_local *lp, int offset, u32 value);
361 	u32 (*dma_in)(struct temac_local *lp, int reg);
362 	void (*dma_out)(struct temac_local *lp, int reg, u32 value);
363 
364 	int tx_irq;
365 	int rx_irq;
366 	int emac_num;
367 
368 	struct sk_buff **rx_skb;
369 	spinlock_t rx_lock;
370 	/* For synchronization of indirect register access.  Must be
371 	 * shared mutex between interfaces in same TEMAC block.
372 	 */
373 	spinlock_t *indirect_lock;
374 	u32 options;			/* Current options word */
375 	int last_link;
376 	unsigned int temac_features;
377 
378 	/* Buffer descriptors */
379 	struct cdmac_bd *tx_bd_v;
380 	dma_addr_t tx_bd_p;
381 	u32 tx_bd_num;
382 	struct cdmac_bd *rx_bd_v;
383 	dma_addr_t rx_bd_p;
384 	u32 rx_bd_num;
385 	int tx_bd_ci;
386 	int tx_bd_tail;
387 	int rx_bd_ci;
388 	int rx_bd_tail;
389 
390 	/* DMA channel control setup */
391 	u8 coalesce_count_tx;
392 	u8 coalesce_delay_tx;
393 	u8 coalesce_count_rx;
394 	u8 coalesce_delay_rx;
395 
396 	struct delayed_work restart_work;
397 };
398 
399 /* Wrappers for temac_ior()/temac_iow() function pointers above */
400 #define temac_ior(lp, o) ((lp)->temac_ior(lp, o))
401 #define temac_iow(lp, o, v) ((lp)->temac_iow(lp, o, v))
402 
403 /* xilinx_temac.c */
404 int temac_indirect_busywait(struct temac_local *lp);
405 u32 temac_indirect_in32(struct temac_local *lp, int reg);
406 u32 temac_indirect_in32_locked(struct temac_local *lp, int reg);
407 void temac_indirect_out32(struct temac_local *lp, int reg, u32 value);
408 void temac_indirect_out32_locked(struct temac_local *lp, int reg, u32 value);
409 
410 /* xilinx_temac_mdio.c */
411 int temac_mdio_setup(struct temac_local *lp, struct platform_device *pdev);
412 void temac_mdio_teardown(struct temac_local *lp);
413 
414 #endif /* XILINX_LL_TEMAC_H */
415