1 // SPDX-License-Identifier: GPL-2.0 2 /* Copyright (c) 2019 - 2022 Beijing WangXun Technology Co., Ltd. */ 3 4 #include <linux/ethtool.h> 5 #include <linux/iopoll.h> 6 #include <linux/pci.h> 7 #include <linux/phy.h> 8 9 #include "../libwx/wx_type.h" 10 #include "../libwx/wx_hw.h" 11 #include "ngbe_type.h" 12 #include "ngbe_mdio.h" 13 14 static int ngbe_phy_read_reg_internal(struct mii_bus *bus, int phy_addr, int regnum) 15 { 16 struct wx *wx = bus->priv; 17 18 if (phy_addr != 0) 19 return 0xffff; 20 return (u16)rd32(wx, NGBE_PHY_CONFIG(regnum)); 21 } 22 23 static int ngbe_phy_write_reg_internal(struct mii_bus *bus, int phy_addr, int regnum, u16 value) 24 { 25 struct wx *wx = bus->priv; 26 27 if (phy_addr == 0) 28 wr32(wx, NGBE_PHY_CONFIG(regnum), value); 29 return 0; 30 } 31 32 static int ngbe_phy_read_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regnum) 33 { 34 u32 command, val, device_type = 0; 35 struct wx *wx = bus->priv; 36 int ret; 37 38 wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0xF); 39 /* setup and write the address cycle command */ 40 command = WX_MSCA_RA(regnum) | 41 WX_MSCA_PA(phy_addr) | 42 WX_MSCA_DA(device_type); 43 wr32(wx, WX_MSCA, command); 44 command = WX_MSCC_CMD(WX_MSCA_CMD_READ) | 45 WX_MSCC_BUSY | 46 WX_MDIO_CLK(6); 47 wr32(wx, WX_MSCC, command); 48 49 /* wait to complete */ 50 ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000, 51 100000, false, wx, WX_MSCC); 52 if (ret) { 53 wx_err(wx, "Mdio read c22 command did not complete.\n"); 54 return ret; 55 } 56 57 return (u16)rd32(wx, WX_MSCC); 58 } 59 60 static int ngbe_phy_write_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regnum, u16 value) 61 { 62 u32 command, val, device_type = 0; 63 struct wx *wx = bus->priv; 64 int ret; 65 66 wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0xF); 67 /* setup and write the address cycle command */ 68 command = WX_MSCA_RA(regnum) | 69 WX_MSCA_PA(phy_addr) | 70 WX_MSCA_DA(device_type); 71 wr32(wx, WX_MSCA, command); 72 command = value | 73 WX_MSCC_CMD(WX_MSCA_CMD_WRITE) | 74 WX_MSCC_BUSY | 75 WX_MDIO_CLK(6); 76 wr32(wx, WX_MSCC, command); 77 78 /* wait to complete */ 79 ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000, 80 100000, false, wx, WX_MSCC); 81 if (ret) 82 wx_err(wx, "Mdio write c22 command did not complete.\n"); 83 84 return ret; 85 } 86 87 static int ngbe_phy_read_reg_mdi_c45(struct mii_bus *bus, int phy_addr, int devnum, int regnum) 88 { 89 struct wx *wx = bus->priv; 90 u32 val, command; 91 int ret; 92 93 wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0x0); 94 /* setup and write the address cycle command */ 95 command = WX_MSCA_RA(regnum) | 96 WX_MSCA_PA(phy_addr) | 97 WX_MSCA_DA(devnum); 98 wr32(wx, WX_MSCA, command); 99 command = WX_MSCC_CMD(WX_MSCA_CMD_READ) | 100 WX_MSCC_BUSY | 101 WX_MDIO_CLK(6); 102 wr32(wx, WX_MSCC, command); 103 104 /* wait to complete */ 105 ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000, 106 100000, false, wx, WX_MSCC); 107 if (ret) { 108 wx_err(wx, "Mdio read c45 command did not complete.\n"); 109 return ret; 110 } 111 112 return (u16)rd32(wx, WX_MSCC); 113 } 114 115 static int ngbe_phy_write_reg_mdi_c45(struct mii_bus *bus, int phy_addr, 116 int devnum, int regnum, u16 value) 117 { 118 struct wx *wx = bus->priv; 119 int ret, command; 120 u16 val; 121 122 wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0x0); 123 /* setup and write the address cycle command */ 124 command = WX_MSCA_RA(regnum) | 125 WX_MSCA_PA(phy_addr) | 126 WX_MSCA_DA(devnum); 127 wr32(wx, WX_MSCA, command); 128 command = value | 129 WX_MSCC_CMD(WX_MSCA_CMD_WRITE) | 130 WX_MSCC_BUSY | 131 WX_MDIO_CLK(6); 132 wr32(wx, WX_MSCC, command); 133 134 /* wait to complete */ 135 ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000, 136 100000, false, wx, WX_MSCC); 137 if (ret) 138 wx_err(wx, "Mdio write c45 command did not complete.\n"); 139 140 return ret; 141 } 142 143 static int ngbe_phy_read_reg_c22(struct mii_bus *bus, int phy_addr, int regnum) 144 { 145 struct wx *wx = bus->priv; 146 u16 phy_data; 147 148 if (wx->mac_type == em_mac_type_mdi) 149 phy_data = ngbe_phy_read_reg_internal(bus, phy_addr, regnum); 150 else 151 phy_data = ngbe_phy_read_reg_mdi_c22(bus, phy_addr, regnum); 152 153 return phy_data; 154 } 155 156 static int ngbe_phy_write_reg_c22(struct mii_bus *bus, int phy_addr, 157 int regnum, u16 value) 158 { 159 struct wx *wx = bus->priv; 160 int ret; 161 162 if (wx->mac_type == em_mac_type_mdi) 163 ret = ngbe_phy_write_reg_internal(bus, phy_addr, regnum, value); 164 else 165 ret = ngbe_phy_write_reg_mdi_c22(bus, phy_addr, regnum, value); 166 167 return ret; 168 } 169 170 static void ngbe_handle_link_change(struct net_device *dev) 171 { 172 struct wx *wx = netdev_priv(dev); 173 struct phy_device *phydev; 174 u32 lan_speed, reg; 175 176 phydev = wx->phydev; 177 if (!(wx->link != phydev->link || 178 wx->speed != phydev->speed || 179 wx->duplex != phydev->duplex)) 180 return; 181 182 wx->link = phydev->link; 183 wx->speed = phydev->speed; 184 wx->duplex = phydev->duplex; 185 switch (phydev->speed) { 186 case SPEED_10: 187 lan_speed = 0; 188 break; 189 case SPEED_100: 190 lan_speed = 1; 191 break; 192 case SPEED_1000: 193 default: 194 lan_speed = 2; 195 break; 196 } 197 wr32m(wx, NGBE_CFG_LAN_SPEED, 0x3, lan_speed); 198 199 if (phydev->link) { 200 reg = rd32(wx, WX_MAC_TX_CFG); 201 reg &= ~WX_MAC_TX_CFG_SPEED_MASK; 202 reg |= WX_MAC_TX_CFG_SPEED_1G | WX_MAC_TX_CFG_TE; 203 wr32(wx, WX_MAC_TX_CFG, reg); 204 /* Re configure MAC RX */ 205 reg = rd32(wx, WX_MAC_RX_CFG); 206 wr32(wx, WX_MAC_RX_CFG, reg); 207 wr32(wx, WX_MAC_PKT_FLT, WX_MAC_PKT_FLT_PR); 208 reg = rd32(wx, WX_MAC_WDG_TIMEOUT); 209 wr32(wx, WX_MAC_WDG_TIMEOUT, reg); 210 } 211 phy_print_status(phydev); 212 } 213 214 int ngbe_phy_connect(struct wx *wx) 215 { 216 int ret; 217 218 ret = phy_connect_direct(wx->netdev, 219 wx->phydev, 220 ngbe_handle_link_change, 221 PHY_INTERFACE_MODE_RGMII_ID); 222 if (ret) { 223 wx_err(wx, "PHY connect failed.\n"); 224 return ret; 225 } 226 227 return 0; 228 } 229 230 static void ngbe_phy_fixup(struct wx *wx) 231 { 232 struct phy_device *phydev = wx->phydev; 233 struct ethtool_eee eee; 234 235 phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT); 236 phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT); 237 phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT); 238 239 phydev->mac_managed_pm = true; 240 if (wx->mac_type != em_mac_type_mdi) 241 return; 242 /* disable EEE, internal phy does not support eee */ 243 memset(&eee, 0, sizeof(eee)); 244 phy_ethtool_set_eee(phydev, &eee); 245 } 246 247 int ngbe_mdio_init(struct wx *wx) 248 { 249 struct pci_dev *pdev = wx->pdev; 250 struct mii_bus *mii_bus; 251 int ret; 252 253 mii_bus = devm_mdiobus_alloc(&pdev->dev); 254 if (!mii_bus) 255 return -ENOMEM; 256 257 mii_bus->name = "ngbe_mii_bus"; 258 mii_bus->read = ngbe_phy_read_reg_c22; 259 mii_bus->write = ngbe_phy_write_reg_c22; 260 mii_bus->phy_mask = GENMASK(31, 4); 261 mii_bus->parent = &pdev->dev; 262 mii_bus->priv = wx; 263 264 if (wx->mac_type == em_mac_type_rgmii) { 265 mii_bus->read_c45 = ngbe_phy_read_reg_mdi_c45; 266 mii_bus->write_c45 = ngbe_phy_write_reg_mdi_c45; 267 } 268 269 snprintf(mii_bus->id, MII_BUS_ID_SIZE, "ngbe-%x", pci_dev_id(pdev)); 270 ret = devm_mdiobus_register(&pdev->dev, mii_bus); 271 if (ret) 272 return ret; 273 274 wx->phydev = phy_find_first(mii_bus); 275 if (!wx->phydev) 276 return -ENODEV; 277 278 phy_attached_info(wx->phydev); 279 ngbe_phy_fixup(wx); 280 281 wx->link = 0; 282 wx->speed = 0; 283 wx->duplex = 0; 284 285 return 0; 286 } 287