1 // SPDX-License-Identifier: GPL-2.0 2 /* Copyright (c) 2019 - 2022 Beijing WangXun Technology Co., Ltd. */ 3 4 #include <linux/types.h> 5 #include <linux/module.h> 6 #include <linux/pci.h> 7 #include <linux/netdevice.h> 8 #include <linux/string.h> 9 #include <linux/etherdevice.h> 10 #include <net/ip.h> 11 #include <linux/phy.h> 12 #include <linux/if_vlan.h> 13 14 #include "../libwx/wx_type.h" 15 #include "../libwx/wx_hw.h" 16 #include "../libwx/wx_lib.h" 17 #include "ngbe_type.h" 18 #include "ngbe_mdio.h" 19 #include "ngbe_hw.h" 20 #include "ngbe_ethtool.h" 21 22 char ngbe_driver_name[] = "ngbe"; 23 24 /* ngbe_pci_tbl - PCI Device ID Table 25 * 26 * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, 27 * Class, Class Mask, private data (not used) } 28 */ 29 static const struct pci_device_id ngbe_pci_tbl[] = { 30 { PCI_VDEVICE(WANGXUN, NGBE_DEV_ID_EM_WX1860AL_W), 0}, 31 { PCI_VDEVICE(WANGXUN, NGBE_DEV_ID_EM_WX1860A2), 0}, 32 { PCI_VDEVICE(WANGXUN, NGBE_DEV_ID_EM_WX1860A2S), 0}, 33 { PCI_VDEVICE(WANGXUN, NGBE_DEV_ID_EM_WX1860A4), 0}, 34 { PCI_VDEVICE(WANGXUN, NGBE_DEV_ID_EM_WX1860A4S), 0}, 35 { PCI_VDEVICE(WANGXUN, NGBE_DEV_ID_EM_WX1860AL2), 0}, 36 { PCI_VDEVICE(WANGXUN, NGBE_DEV_ID_EM_WX1860AL2S), 0}, 37 { PCI_VDEVICE(WANGXUN, NGBE_DEV_ID_EM_WX1860AL4), 0}, 38 { PCI_VDEVICE(WANGXUN, NGBE_DEV_ID_EM_WX1860AL4S), 0}, 39 { PCI_VDEVICE(WANGXUN, NGBE_DEV_ID_EM_WX1860LC), 0}, 40 { PCI_VDEVICE(WANGXUN, NGBE_DEV_ID_EM_WX1860A1), 0}, 41 { PCI_VDEVICE(WANGXUN, NGBE_DEV_ID_EM_WX1860A1L), 0}, 42 /* required last entry */ 43 { .device = 0 } 44 }; 45 46 /** 47 * ngbe_init_type_code - Initialize the shared code 48 * @wx: pointer to hardware structure 49 **/ 50 static void ngbe_init_type_code(struct wx *wx) 51 { 52 int wol_mask = 0, ncsi_mask = 0; 53 u16 type_mask = 0, val; 54 55 wx->mac.type = wx_mac_em; 56 type_mask = (u16)(wx->subsystem_device_id & NGBE_OEM_MASK); 57 ncsi_mask = wx->subsystem_device_id & NGBE_NCSI_MASK; 58 wol_mask = wx->subsystem_device_id & NGBE_WOL_MASK; 59 60 val = rd32(wx, WX_CFG_PORT_ST); 61 wx->mac_type = (val & BIT(7)) >> 7 ? 62 em_mac_type_rgmii : 63 em_mac_type_mdi; 64 65 wx->wol_hw_supported = (wol_mask == NGBE_WOL_SUP) ? 1 : 0; 66 wx->ncsi_enabled = (ncsi_mask == NGBE_NCSI_MASK || 67 type_mask == NGBE_SUBID_OCP_CARD) ? 1 : 0; 68 69 switch (type_mask) { 70 case NGBE_SUBID_LY_YT8521S_SFP: 71 case NGBE_SUBID_LY_M88E1512_SFP: 72 case NGBE_SUBID_YT8521S_SFP_GPIO: 73 case NGBE_SUBID_INTERNAL_YT8521S_SFP_GPIO: 74 wx->gpio_ctrl = 1; 75 break; 76 default: 77 wx->gpio_ctrl = 0; 78 break; 79 } 80 } 81 82 /** 83 * ngbe_init_rss_key - Initialize wx RSS key 84 * @wx: device handle 85 * 86 * Allocates and initializes the RSS key if it is not allocated. 87 **/ 88 static inline int ngbe_init_rss_key(struct wx *wx) 89 { 90 u32 *rss_key; 91 92 if (!wx->rss_key) { 93 rss_key = kzalloc(WX_RSS_KEY_SIZE, GFP_KERNEL); 94 if (unlikely(!rss_key)) 95 return -ENOMEM; 96 97 netdev_rss_key_fill(rss_key, WX_RSS_KEY_SIZE); 98 wx->rss_key = rss_key; 99 } 100 101 return 0; 102 } 103 104 /** 105 * ngbe_sw_init - Initialize general software structures 106 * @wx: board private structure to initialize 107 **/ 108 static int ngbe_sw_init(struct wx *wx) 109 { 110 struct pci_dev *pdev = wx->pdev; 111 u16 msix_count = 0; 112 int err = 0; 113 114 wx->mac.num_rar_entries = NGBE_RAR_ENTRIES; 115 wx->mac.max_rx_queues = NGBE_MAX_RX_QUEUES; 116 wx->mac.max_tx_queues = NGBE_MAX_TX_QUEUES; 117 wx->mac.mcft_size = NGBE_MC_TBL_SIZE; 118 wx->mac.vft_size = NGBE_SP_VFT_TBL_SIZE; 119 wx->mac.rx_pb_size = NGBE_RX_PB_SIZE; 120 wx->mac.tx_pb_size = NGBE_TDB_PB_SZ; 121 122 /* PCI config space info */ 123 err = wx_sw_init(wx); 124 if (err < 0) { 125 wx_err(wx, "read of internal subsystem device id failed\n"); 126 return err; 127 } 128 129 /* mac type, phy type , oem type */ 130 ngbe_init_type_code(wx); 131 132 /* Set common capability flags and settings */ 133 wx->max_q_vectors = NGBE_MAX_MSIX_VECTORS; 134 err = wx_get_pcie_msix_counts(wx, &msix_count, NGBE_MAX_MSIX_VECTORS); 135 if (err) 136 dev_err(&pdev->dev, "Do not support MSI-X\n"); 137 wx->mac.max_msix_vectors = msix_count; 138 139 if (ngbe_init_rss_key(wx)) 140 return -ENOMEM; 141 142 /* enable itr by default in dynamic mode */ 143 wx->rx_itr_setting = 1; 144 wx->tx_itr_setting = 1; 145 146 /* set default ring sizes */ 147 wx->tx_ring_count = NGBE_DEFAULT_TXD; 148 wx->rx_ring_count = NGBE_DEFAULT_RXD; 149 150 /* set default work limits */ 151 wx->tx_work_limit = NGBE_DEFAULT_TX_WORK; 152 wx->rx_work_limit = NGBE_DEFAULT_RX_WORK; 153 154 return 0; 155 } 156 157 /** 158 * ngbe_irq_enable - Enable default interrupt generation settings 159 * @wx: board private structure 160 * @queues: enable all queues interrupts 161 **/ 162 static void ngbe_irq_enable(struct wx *wx, bool queues) 163 { 164 u32 mask; 165 166 /* enable misc interrupt */ 167 mask = NGBE_PX_MISC_IEN_MASK; 168 169 wr32(wx, WX_GPIO_DDR, WX_GPIO_DDR_0); 170 wr32(wx, WX_GPIO_INTEN, WX_GPIO_INTEN_0 | WX_GPIO_INTEN_1); 171 wr32(wx, WX_GPIO_INTTYPE_LEVEL, 0x0); 172 wr32(wx, WX_GPIO_POLARITY, wx->gpio_ctrl ? 0 : 0x3); 173 174 wr32(wx, WX_PX_MISC_IEN, mask); 175 176 /* mask interrupt */ 177 if (queues) 178 wx_intr_enable(wx, NGBE_INTR_ALL); 179 else 180 wx_intr_enable(wx, NGBE_INTR_MISC(wx)); 181 } 182 183 /** 184 * ngbe_intr - msi/legacy mode Interrupt Handler 185 * @irq: interrupt number 186 * @data: pointer to a network interface device structure 187 **/ 188 static irqreturn_t ngbe_intr(int __always_unused irq, void *data) 189 { 190 struct wx_q_vector *q_vector; 191 struct wx *wx = data; 192 struct pci_dev *pdev; 193 u32 eicr; 194 195 q_vector = wx->q_vector[0]; 196 pdev = wx->pdev; 197 198 eicr = wx_misc_isb(wx, WX_ISB_VEC0); 199 if (!eicr) { 200 /* shared interrupt alert! 201 * the interrupt that we masked before the EICR read. 202 */ 203 if (netif_running(wx->netdev)) 204 ngbe_irq_enable(wx, true); 205 return IRQ_NONE; /* Not our interrupt */ 206 } 207 wx->isb_mem[WX_ISB_VEC0] = 0; 208 if (!(pdev->msi_enabled)) 209 wr32(wx, WX_PX_INTA, 1); 210 211 wx->isb_mem[WX_ISB_MISC] = 0; 212 /* would disable interrupts here but it is auto disabled */ 213 napi_schedule_irqoff(&q_vector->napi); 214 215 if (netif_running(wx->netdev)) 216 ngbe_irq_enable(wx, false); 217 218 return IRQ_HANDLED; 219 } 220 221 static irqreturn_t ngbe_msix_other(int __always_unused irq, void *data) 222 { 223 struct wx *wx = data; 224 225 /* re-enable the original interrupt state, no lsc, no queues */ 226 if (netif_running(wx->netdev)) 227 ngbe_irq_enable(wx, false); 228 229 return IRQ_HANDLED; 230 } 231 232 /** 233 * ngbe_request_msix_irqs - Initialize MSI-X interrupts 234 * @wx: board private structure 235 * 236 * ngbe_request_msix_irqs allocates MSI-X vectors and requests 237 * interrupts from the kernel. 238 **/ 239 static int ngbe_request_msix_irqs(struct wx *wx) 240 { 241 struct net_device *netdev = wx->netdev; 242 int vector, err; 243 244 for (vector = 0; vector < wx->num_q_vectors; vector++) { 245 struct wx_q_vector *q_vector = wx->q_vector[vector]; 246 struct msix_entry *entry = &wx->msix_entries[vector]; 247 248 if (q_vector->tx.ring && q_vector->rx.ring) 249 snprintf(q_vector->name, sizeof(q_vector->name) - 1, 250 "%s-TxRx-%d", netdev->name, entry->entry); 251 else 252 /* skip this unused q_vector */ 253 continue; 254 255 err = request_irq(entry->vector, wx_msix_clean_rings, 0, 256 q_vector->name, q_vector); 257 if (err) { 258 wx_err(wx, "request_irq failed for MSIX interrupt %s Error: %d\n", 259 q_vector->name, err); 260 goto free_queue_irqs; 261 } 262 } 263 264 err = request_irq(wx->msix_entries[vector].vector, 265 ngbe_msix_other, 0, netdev->name, wx); 266 267 if (err) { 268 wx_err(wx, "request_irq for msix_other failed: %d\n", err); 269 goto free_queue_irqs; 270 } 271 272 return 0; 273 274 free_queue_irqs: 275 while (vector) { 276 vector--; 277 free_irq(wx->msix_entries[vector].vector, 278 wx->q_vector[vector]); 279 } 280 wx_reset_interrupt_capability(wx); 281 return err; 282 } 283 284 /** 285 * ngbe_request_irq - initialize interrupts 286 * @wx: board private structure 287 * 288 * Attempts to configure interrupts using the best available 289 * capabilities of the hardware and kernel. 290 **/ 291 static int ngbe_request_irq(struct wx *wx) 292 { 293 struct net_device *netdev = wx->netdev; 294 struct pci_dev *pdev = wx->pdev; 295 int err; 296 297 if (pdev->msix_enabled) 298 err = ngbe_request_msix_irqs(wx); 299 else if (pdev->msi_enabled) 300 err = request_irq(pdev->irq, ngbe_intr, 0, 301 netdev->name, wx); 302 else 303 err = request_irq(pdev->irq, ngbe_intr, IRQF_SHARED, 304 netdev->name, wx); 305 306 if (err) 307 wx_err(wx, "request_irq failed, Error %d\n", err); 308 309 return err; 310 } 311 312 static void ngbe_disable_device(struct wx *wx) 313 { 314 struct net_device *netdev = wx->netdev; 315 u32 i; 316 317 /* disable all enabled rx queues */ 318 for (i = 0; i < wx->num_rx_queues; i++) 319 /* this call also flushes the previous write */ 320 wx_disable_rx_queue(wx, wx->rx_ring[i]); 321 /* disable receives */ 322 wx_disable_rx(wx); 323 wx_napi_disable_all(wx); 324 netif_tx_stop_all_queues(netdev); 325 netif_tx_disable(netdev); 326 if (wx->gpio_ctrl) 327 ngbe_sfp_modules_txrx_powerctl(wx, false); 328 wx_irq_disable(wx); 329 /* disable transmits in the hardware now that interrupts are off */ 330 for (i = 0; i < wx->num_tx_queues; i++) { 331 u8 reg_idx = wx->tx_ring[i]->reg_idx; 332 333 wr32(wx, WX_PX_TR_CFG(reg_idx), WX_PX_TR_CFG_SWFLSH); 334 } 335 336 wx_update_stats(wx); 337 } 338 339 static void ngbe_down(struct wx *wx) 340 { 341 phy_stop(wx->phydev); 342 ngbe_disable_device(wx); 343 wx_clean_all_tx_rings(wx); 344 wx_clean_all_rx_rings(wx); 345 } 346 347 static void ngbe_up(struct wx *wx) 348 { 349 wx_configure_vectors(wx); 350 351 /* make sure to complete pre-operations */ 352 smp_mb__before_atomic(); 353 wx_napi_enable_all(wx); 354 /* enable transmits */ 355 netif_tx_start_all_queues(wx->netdev); 356 357 /* clear any pending interrupts, may auto mask */ 358 rd32(wx, WX_PX_IC(0)); 359 rd32(wx, WX_PX_MISC_IC); 360 ngbe_irq_enable(wx, true); 361 if (wx->gpio_ctrl) 362 ngbe_sfp_modules_txrx_powerctl(wx, true); 363 364 phy_start(wx->phydev); 365 } 366 367 /** 368 * ngbe_open - Called when a network interface is made active 369 * @netdev: network interface device structure 370 * 371 * Returns 0 on success, negative value on failure 372 * 373 * The open entry point is called when a network interface is made 374 * active by the system (IFF_UP). 375 **/ 376 static int ngbe_open(struct net_device *netdev) 377 { 378 struct wx *wx = netdev_priv(netdev); 379 int err; 380 381 wx_control_hw(wx, true); 382 383 err = wx_setup_resources(wx); 384 if (err) 385 return err; 386 387 wx_configure(wx); 388 389 err = ngbe_request_irq(wx); 390 if (err) 391 goto err_free_resources; 392 393 err = ngbe_phy_connect(wx); 394 if (err) 395 goto err_free_irq; 396 397 err = netif_set_real_num_tx_queues(netdev, wx->num_tx_queues); 398 if (err) 399 goto err_dis_phy; 400 401 err = netif_set_real_num_rx_queues(netdev, wx->num_rx_queues); 402 if (err) 403 goto err_dis_phy; 404 405 ngbe_up(wx); 406 407 return 0; 408 err_dis_phy: 409 phy_disconnect(wx->phydev); 410 err_free_irq: 411 wx_free_irq(wx); 412 err_free_resources: 413 wx_free_resources(wx); 414 return err; 415 } 416 417 /** 418 * ngbe_close - Disables a network interface 419 * @netdev: network interface device structure 420 * 421 * Returns 0, this is not allowed to fail 422 * 423 * The close entry point is called when an interface is de-activated 424 * by the OS. The hardware is still under the drivers control, but 425 * needs to be disabled. A global MAC reset is issued to stop the 426 * hardware, and all transmit and receive resources are freed. 427 **/ 428 static int ngbe_close(struct net_device *netdev) 429 { 430 struct wx *wx = netdev_priv(netdev); 431 432 ngbe_down(wx); 433 wx_free_irq(wx); 434 wx_free_resources(wx); 435 phy_disconnect(wx->phydev); 436 wx_control_hw(wx, false); 437 438 return 0; 439 } 440 441 static void ngbe_dev_shutdown(struct pci_dev *pdev, bool *enable_wake) 442 { 443 struct wx *wx = pci_get_drvdata(pdev); 444 struct net_device *netdev; 445 u32 wufc = wx->wol; 446 447 netdev = wx->netdev; 448 rtnl_lock(); 449 netif_device_detach(netdev); 450 451 if (netif_running(netdev)) 452 ngbe_close(netdev); 453 wx_clear_interrupt_scheme(wx); 454 rtnl_unlock(); 455 456 if (wufc) { 457 wx_set_rx_mode(netdev); 458 wx_configure_rx(wx); 459 wr32(wx, NGBE_PSR_WKUP_CTL, wufc); 460 } else { 461 wr32(wx, NGBE_PSR_WKUP_CTL, 0); 462 } 463 pci_wake_from_d3(pdev, !!wufc); 464 *enable_wake = !!wufc; 465 wx_control_hw(wx, false); 466 467 pci_disable_device(pdev); 468 } 469 470 static void ngbe_shutdown(struct pci_dev *pdev) 471 { 472 struct wx *wx = pci_get_drvdata(pdev); 473 bool wake; 474 475 wake = !!wx->wol; 476 477 ngbe_dev_shutdown(pdev, &wake); 478 479 if (system_state == SYSTEM_POWER_OFF) { 480 pci_wake_from_d3(pdev, wake); 481 pci_set_power_state(pdev, PCI_D3hot); 482 } 483 } 484 485 static const struct net_device_ops ngbe_netdev_ops = { 486 .ndo_open = ngbe_open, 487 .ndo_stop = ngbe_close, 488 .ndo_change_mtu = wx_change_mtu, 489 .ndo_start_xmit = wx_xmit_frame, 490 .ndo_set_rx_mode = wx_set_rx_mode, 491 .ndo_set_features = wx_set_features, 492 .ndo_validate_addr = eth_validate_addr, 493 .ndo_set_mac_address = wx_set_mac, 494 .ndo_get_stats64 = wx_get_stats64, 495 .ndo_vlan_rx_add_vid = wx_vlan_rx_add_vid, 496 .ndo_vlan_rx_kill_vid = wx_vlan_rx_kill_vid, 497 }; 498 499 /** 500 * ngbe_probe - Device Initialization Routine 501 * @pdev: PCI device information struct 502 * @ent: entry in ngbe_pci_tbl 503 * 504 * Returns 0 on success, negative on failure 505 * 506 * ngbe_probe initializes an wx identified by a pci_dev structure. 507 * The OS initialization, configuring of the wx private structure, 508 * and a hardware reset occur. 509 **/ 510 static int ngbe_probe(struct pci_dev *pdev, 511 const struct pci_device_id __always_unused *ent) 512 { 513 struct net_device *netdev; 514 u32 e2rom_cksum_cap = 0; 515 struct wx *wx = NULL; 516 static int func_nums; 517 u16 e2rom_ver = 0; 518 u32 etrack_id = 0; 519 u32 saved_ver = 0; 520 int err; 521 522 err = pci_enable_device_mem(pdev); 523 if (err) 524 return err; 525 526 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); 527 if (err) { 528 dev_err(&pdev->dev, 529 "No usable DMA configuration, aborting\n"); 530 goto err_pci_disable_dev; 531 } 532 533 err = pci_request_selected_regions(pdev, 534 pci_select_bars(pdev, IORESOURCE_MEM), 535 ngbe_driver_name); 536 if (err) { 537 dev_err(&pdev->dev, 538 "pci_request_selected_regions failed %d\n", err); 539 goto err_pci_disable_dev; 540 } 541 542 pci_set_master(pdev); 543 544 netdev = devm_alloc_etherdev_mqs(&pdev->dev, 545 sizeof(struct wx), 546 NGBE_MAX_TX_QUEUES, 547 NGBE_MAX_RX_QUEUES); 548 if (!netdev) { 549 err = -ENOMEM; 550 goto err_pci_release_regions; 551 } 552 553 SET_NETDEV_DEV(netdev, &pdev->dev); 554 555 wx = netdev_priv(netdev); 556 wx->netdev = netdev; 557 wx->pdev = pdev; 558 wx->msg_enable = BIT(3) - 1; 559 560 wx->hw_addr = devm_ioremap(&pdev->dev, 561 pci_resource_start(pdev, 0), 562 pci_resource_len(pdev, 0)); 563 if (!wx->hw_addr) { 564 err = -EIO; 565 goto err_pci_release_regions; 566 } 567 568 wx->driver_name = ngbe_driver_name; 569 ngbe_set_ethtool_ops(netdev); 570 netdev->netdev_ops = &ngbe_netdev_ops; 571 572 netdev->features = NETIF_F_SG | NETIF_F_IP_CSUM | 573 NETIF_F_TSO | NETIF_F_TSO6 | 574 NETIF_F_RXHASH | NETIF_F_RXCSUM; 575 netdev->features |= NETIF_F_SCTP_CRC | NETIF_F_TSO_MANGLEID; 576 netdev->vlan_features |= netdev->features; 577 netdev->features |= NETIF_F_IPV6_CSUM | NETIF_F_VLAN_FEATURES; 578 /* copy netdev features into list of user selectable features */ 579 netdev->hw_features |= netdev->features | NETIF_F_RXALL; 580 netdev->hw_features |= NETIF_F_NTUPLE | NETIF_F_HW_TC; 581 netdev->features |= NETIF_F_HIGHDMA; 582 netdev->hw_features |= NETIF_F_GRO; 583 netdev->features |= NETIF_F_GRO; 584 585 netdev->priv_flags |= IFF_UNICAST_FLT; 586 netdev->priv_flags |= IFF_SUPP_NOFCS; 587 588 netdev->min_mtu = ETH_MIN_MTU; 589 netdev->max_mtu = WX_MAX_JUMBO_FRAME_SIZE - 590 (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); 591 592 wx->bd_number = func_nums; 593 /* setup the private structure */ 594 err = ngbe_sw_init(wx); 595 if (err) 596 goto err_free_mac_table; 597 598 /* check if flash load is done after hw power up */ 599 err = wx_check_flash_load(wx, NGBE_SPI_ILDR_STATUS_PERST); 600 if (err) 601 goto err_free_mac_table; 602 err = wx_check_flash_load(wx, NGBE_SPI_ILDR_STATUS_PWRRST); 603 if (err) 604 goto err_free_mac_table; 605 606 err = wx_mng_present(wx); 607 if (err) { 608 dev_err(&pdev->dev, "Management capability is not present\n"); 609 goto err_free_mac_table; 610 } 611 612 err = ngbe_reset_hw(wx); 613 if (err) { 614 dev_err(&pdev->dev, "HW Init failed: %d\n", err); 615 goto err_free_mac_table; 616 } 617 618 if (wx->bus.func == 0) { 619 wr32(wx, NGBE_CALSUM_CAP_STATUS, 0x0); 620 wr32(wx, NGBE_EEPROM_VERSION_STORE_REG, 0x0); 621 } else { 622 e2rom_cksum_cap = rd32(wx, NGBE_CALSUM_CAP_STATUS); 623 saved_ver = rd32(wx, NGBE_EEPROM_VERSION_STORE_REG); 624 } 625 626 wx_init_eeprom_params(wx); 627 if (wx->bus.func == 0 || e2rom_cksum_cap == 0) { 628 /* make sure the EEPROM is ready */ 629 err = ngbe_eeprom_chksum_hostif(wx); 630 if (err) { 631 dev_err(&pdev->dev, "The EEPROM Checksum Is Not Valid\n"); 632 err = -EIO; 633 goto err_free_mac_table; 634 } 635 } 636 637 wx->wol = 0; 638 if (wx->wol_hw_supported) 639 wx->wol = NGBE_PSR_WKUP_CTL_MAG; 640 641 netdev->wol_enabled = !!(wx->wol); 642 wr32(wx, NGBE_PSR_WKUP_CTL, wx->wol); 643 device_set_wakeup_enable(&pdev->dev, wx->wol); 644 645 /* Save off EEPROM version number and Option Rom version which 646 * together make a unique identify for the eeprom 647 */ 648 if (saved_ver) { 649 etrack_id = saved_ver; 650 } else { 651 wx_read_ee_hostif(wx, 652 wx->eeprom.sw_region_offset + NGBE_EEPROM_VERSION_H, 653 &e2rom_ver); 654 etrack_id = e2rom_ver << 16; 655 wx_read_ee_hostif(wx, 656 wx->eeprom.sw_region_offset + NGBE_EEPROM_VERSION_L, 657 &e2rom_ver); 658 etrack_id |= e2rom_ver; 659 wr32(wx, NGBE_EEPROM_VERSION_STORE_REG, etrack_id); 660 } 661 snprintf(wx->eeprom_id, sizeof(wx->eeprom_id), 662 "0x%08x", etrack_id); 663 664 eth_hw_addr_set(netdev, wx->mac.perm_addr); 665 wx_mac_set_default_filter(wx, wx->mac.perm_addr); 666 667 err = wx_init_interrupt_scheme(wx); 668 if (err) 669 goto err_free_mac_table; 670 671 /* phy Interface Configuration */ 672 err = ngbe_mdio_init(wx); 673 if (err) 674 goto err_clear_interrupt_scheme; 675 676 err = register_netdev(netdev); 677 if (err) 678 goto err_register; 679 680 pci_set_drvdata(pdev, wx); 681 682 return 0; 683 684 err_register: 685 wx_control_hw(wx, false); 686 err_clear_interrupt_scheme: 687 wx_clear_interrupt_scheme(wx); 688 err_free_mac_table: 689 kfree(wx->mac_table); 690 err_pci_release_regions: 691 pci_release_selected_regions(pdev, 692 pci_select_bars(pdev, IORESOURCE_MEM)); 693 err_pci_disable_dev: 694 pci_disable_device(pdev); 695 return err; 696 } 697 698 /** 699 * ngbe_remove - Device Removal Routine 700 * @pdev: PCI device information struct 701 * 702 * ngbe_remove is called by the PCI subsystem to alert the driver 703 * that it should release a PCI device. The could be caused by a 704 * Hot-Plug event, or because the driver is going to be removed from 705 * memory. 706 **/ 707 static void ngbe_remove(struct pci_dev *pdev) 708 { 709 struct wx *wx = pci_get_drvdata(pdev); 710 struct net_device *netdev; 711 712 netdev = wx->netdev; 713 unregister_netdev(netdev); 714 pci_release_selected_regions(pdev, 715 pci_select_bars(pdev, IORESOURCE_MEM)); 716 717 kfree(wx->mac_table); 718 wx_clear_interrupt_scheme(wx); 719 720 pci_disable_device(pdev); 721 } 722 723 static int ngbe_suspend(struct pci_dev *pdev, pm_message_t state) 724 { 725 bool wake; 726 727 ngbe_dev_shutdown(pdev, &wake); 728 device_set_wakeup_enable(&pdev->dev, wake); 729 730 return 0; 731 } 732 733 static int ngbe_resume(struct pci_dev *pdev) 734 { 735 struct net_device *netdev; 736 struct wx *wx; 737 u32 err; 738 739 wx = pci_get_drvdata(pdev); 740 netdev = wx->netdev; 741 742 err = pci_enable_device_mem(pdev); 743 if (err) { 744 wx_err(wx, "Cannot enable PCI device from suspend\n"); 745 return err; 746 } 747 pci_set_master(pdev); 748 device_wakeup_disable(&pdev->dev); 749 750 ngbe_reset_hw(wx); 751 rtnl_lock(); 752 err = wx_init_interrupt_scheme(wx); 753 if (!err && netif_running(netdev)) 754 err = ngbe_open(netdev); 755 if (!err) 756 netif_device_attach(netdev); 757 rtnl_unlock(); 758 759 return 0; 760 } 761 762 static struct pci_driver ngbe_driver = { 763 .name = ngbe_driver_name, 764 .id_table = ngbe_pci_tbl, 765 .probe = ngbe_probe, 766 .remove = ngbe_remove, 767 .suspend = ngbe_suspend, 768 .resume = ngbe_resume, 769 .shutdown = ngbe_shutdown, 770 }; 771 772 module_pci_driver(ngbe_driver); 773 774 MODULE_DEVICE_TABLE(pci, ngbe_pci_tbl); 775 MODULE_AUTHOR("Beijing WangXun Technology Co., Ltd, <software@net-swift.com>"); 776 MODULE_DESCRIPTION("WangXun(R) Gigabit PCI Express Network Driver"); 777 MODULE_LICENSE("GPL"); 778