1 // SPDX-License-Identifier: GPL-2.0 2 3 /* Texas Instruments ICSSG SR1.0 Ethernet Driver 4 * 5 * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/ 6 * Copyright (c) Siemens AG, 2024 7 * 8 */ 9 10 #include <linux/etherdevice.h> 11 #include <linux/genalloc.h> 12 #include <linux/kernel.h> 13 #include <linux/mfd/syscon.h> 14 #include <linux/module.h> 15 #include <linux/of.h> 16 #include <linux/of_mdio.h> 17 #include <linux/of_net.h> 18 #include <linux/platform_device.h> 19 #include <linux/property.h> 20 #include <linux/phy.h> 21 #include <linux/remoteproc/pruss.h> 22 #include <linux/pruss_driver.h> 23 24 #include "icssg_prueth.h" 25 #include "icssg_mii_rt.h" 26 #include "../k3-cppi-desc-pool.h" 27 28 #define PRUETH_MODULE_DESCRIPTION "PRUSS ICSSG SR1.0 Ethernet driver" 29 30 /* SR1: Set buffer sizes for the pools. There are 8 internal queues 31 * implemented in firmware, but only 4 tx channels/threads in the Egress 32 * direction to firmware. Need a high priority queue for management 33 * messages since they shouldn't be blocked even during high traffic 34 * situation. So use Q0-Q2 as data queues and Q3 as management queue 35 * in the max case. However for ease of configuration, use the max 36 * data queue + 1 for management message if we are not using max 37 * case. 38 * 39 * Allocate 4 MTU buffers per data queue. Firmware requires 40 * pool sizes to be set for internal queues. Set the upper 5 queue 41 * pool size to min size of 128 bytes since there are only 3 tx 42 * data channels and management queue requires only minimum buffer. 43 * i.e lower queues are used by driver and highest priority queue 44 * from that is used for management message. 45 */ 46 47 static int emac_egress_buf_pool_size[] = { 48 PRUETH_EMAC_BUF_POOL_SIZE_SR1, PRUETH_EMAC_BUF_POOL_SIZE_SR1, 49 PRUETH_EMAC_BUF_POOL_SIZE_SR1, PRUETH_EMAC_BUF_POOL_MIN_SIZE_SR1, 50 PRUETH_EMAC_BUF_POOL_MIN_SIZE_SR1, PRUETH_EMAC_BUF_POOL_MIN_SIZE_SR1, 51 PRUETH_EMAC_BUF_POOL_MIN_SIZE_SR1, PRUETH_EMAC_BUF_POOL_MIN_SIZE_SR1 52 }; 53 54 static void icssg_config_sr1(struct prueth *prueth, struct prueth_emac *emac, 55 int slice) 56 { 57 struct icssg_sr1_config config; 58 void __iomem *va; 59 int i, index; 60 61 memset(&config, 0, sizeof(config)); 62 config.addr_lo = cpu_to_le32(lower_32_bits(prueth->msmcram.pa)); 63 config.addr_hi = cpu_to_le32(upper_32_bits(prueth->msmcram.pa)); 64 config.rx_flow_id = cpu_to_le32(emac->rx_flow_id_base); /* flow id for host port */ 65 config.rx_mgr_flow_id = cpu_to_le32(emac->rx_mgm_flow_id_base); /* for mgm ch */ 66 config.rand_seed = cpu_to_le32(get_random_u32()); 67 68 for (i = PRUETH_EMAC_BUF_POOL_START_SR1; i < PRUETH_NUM_BUF_POOLS_SR1; i++) { 69 index = i - PRUETH_EMAC_BUF_POOL_START_SR1; 70 config.tx_buf_sz[i] = cpu_to_le32(emac_egress_buf_pool_size[index]); 71 } 72 73 va = prueth->shram.va + slice * ICSSG_CONFIG_OFFSET_SLICE1; 74 memcpy_toio(va, &config, sizeof(config)); 75 76 emac->speed = SPEED_1000; 77 emac->duplex = DUPLEX_FULL; 78 } 79 80 static int emac_send_command_sr1(struct prueth_emac *emac, u32 cmd) 81 { 82 struct cppi5_host_desc_t *first_desc; 83 u32 pkt_len = sizeof(emac->cmd_data); 84 __le32 *data = emac->cmd_data; 85 dma_addr_t desc_dma, buf_dma; 86 struct prueth_tx_chn *tx_chn; 87 void **swdata; 88 int ret = 0; 89 u32 *epib; 90 91 netdev_dbg(emac->ndev, "Sending cmd %x\n", cmd); 92 93 /* only one command at a time allowed to firmware */ 94 mutex_lock(&emac->cmd_lock); 95 data[0] = cpu_to_le32(cmd); 96 97 /* highest priority channel for management messages */ 98 tx_chn = &emac->tx_chns[emac->tx_ch_num - 1]; 99 100 /* Map the linear buffer */ 101 buf_dma = dma_map_single(tx_chn->dma_dev, data, pkt_len, DMA_TO_DEVICE); 102 if (dma_mapping_error(tx_chn->dma_dev, buf_dma)) { 103 netdev_err(emac->ndev, "cmd %x: failed to map cmd buffer\n", cmd); 104 ret = -EINVAL; 105 goto err_unlock; 106 } 107 108 first_desc = k3_cppi_desc_pool_alloc(tx_chn->desc_pool); 109 if (!first_desc) { 110 netdev_err(emac->ndev, "cmd %x: failed to allocate descriptor\n", cmd); 111 dma_unmap_single(tx_chn->dma_dev, buf_dma, pkt_len, DMA_TO_DEVICE); 112 ret = -ENOMEM; 113 goto err_unlock; 114 } 115 116 cppi5_hdesc_init(first_desc, CPPI5_INFO0_HDESC_EPIB_PRESENT, 117 PRUETH_NAV_PS_DATA_SIZE); 118 cppi5_hdesc_set_pkttype(first_desc, PRUETH_PKT_TYPE_CMD); 119 epib = first_desc->epib; 120 epib[0] = 0; 121 epib[1] = 0; 122 123 cppi5_hdesc_attach_buf(first_desc, buf_dma, pkt_len, buf_dma, pkt_len); 124 swdata = cppi5_hdesc_get_swdata(first_desc); 125 *swdata = data; 126 127 cppi5_hdesc_set_pktlen(first_desc, pkt_len); 128 desc_dma = k3_cppi_desc_pool_virt2dma(tx_chn->desc_pool, first_desc); 129 130 /* send command */ 131 reinit_completion(&emac->cmd_complete); 132 ret = k3_udma_glue_push_tx_chn(tx_chn->tx_chn, first_desc, desc_dma); 133 if (ret) { 134 netdev_err(emac->ndev, "cmd %x: push failed: %d\n", cmd, ret); 135 goto free_desc; 136 } 137 ret = wait_for_completion_timeout(&emac->cmd_complete, msecs_to_jiffies(100)); 138 if (!ret) 139 netdev_err(emac->ndev, "cmd %x: completion timeout\n", cmd); 140 141 mutex_unlock(&emac->cmd_lock); 142 143 return ret; 144 free_desc: 145 prueth_xmit_free(tx_chn, first_desc); 146 err_unlock: 147 mutex_unlock(&emac->cmd_lock); 148 149 return ret; 150 } 151 152 static void icssg_config_set_speed_sr1(struct prueth_emac *emac) 153 { 154 u32 cmd = ICSSG_PSTATE_SPEED_DUPLEX_CMD_SR1, val; 155 struct prueth *prueth = emac->prueth; 156 int slice = prueth_emac_slice(emac); 157 158 val = icssg_rgmii_get_speed(prueth->miig_rt, slice); 159 /* firmware expects speed settings in bit 2-1 */ 160 val <<= 1; 161 cmd |= val; 162 163 val = icssg_rgmii_get_fullduplex(prueth->miig_rt, slice); 164 /* firmware expects full duplex settings in bit 3 */ 165 val <<= 3; 166 cmd |= val; 167 168 emac_send_command_sr1(emac, cmd); 169 } 170 171 /* called back by PHY layer if there is change in link state of hw port*/ 172 static void emac_adjust_link_sr1(struct net_device *ndev) 173 { 174 struct prueth_emac *emac = netdev_priv(ndev); 175 struct phy_device *phydev = ndev->phydev; 176 struct prueth *prueth = emac->prueth; 177 bool new_state = false; 178 unsigned long flags; 179 180 if (phydev->link) { 181 /* check the mode of operation - full/half duplex */ 182 if (phydev->duplex != emac->duplex) { 183 new_state = true; 184 emac->duplex = phydev->duplex; 185 } 186 if (phydev->speed != emac->speed) { 187 new_state = true; 188 emac->speed = phydev->speed; 189 } 190 if (!emac->link) { 191 new_state = true; 192 emac->link = 1; 193 } 194 } else if (emac->link) { 195 new_state = true; 196 emac->link = 0; 197 198 /* f/w should support 100 & 1000 */ 199 emac->speed = SPEED_1000; 200 201 /* half duplex may not be supported by f/w */ 202 emac->duplex = DUPLEX_FULL; 203 } 204 205 if (new_state) { 206 phy_print_status(phydev); 207 208 /* update RGMII and MII configuration based on PHY negotiated 209 * values 210 */ 211 if (emac->link) { 212 /* Set the RGMII cfg for gig en and full duplex */ 213 icssg_update_rgmii_cfg(prueth->miig_rt, emac); 214 215 /* update the Tx IPG based on 100M/1G speed */ 216 spin_lock_irqsave(&emac->lock, flags); 217 icssg_config_ipg(emac); 218 spin_unlock_irqrestore(&emac->lock, flags); 219 icssg_config_set_speed_sr1(emac); 220 } 221 } 222 223 if (emac->link) { 224 /* reactivate the transmit queue */ 225 netif_tx_wake_all_queues(ndev); 226 } else { 227 netif_tx_stop_all_queues(ndev); 228 prueth_cleanup_tx_ts(emac); 229 } 230 } 231 232 static int emac_phy_connect(struct prueth_emac *emac) 233 { 234 struct prueth *prueth = emac->prueth; 235 struct net_device *ndev = emac->ndev; 236 /* connect PHY */ 237 ndev->phydev = of_phy_connect(emac->ndev, emac->phy_node, 238 &emac_adjust_link_sr1, 0, 239 emac->phy_if); 240 if (!ndev->phydev) { 241 dev_err(prueth->dev, "couldn't connect to phy %s\n", 242 emac->phy_node->full_name); 243 return -ENODEV; 244 } 245 246 if (!emac->half_duplex) { 247 dev_dbg(prueth->dev, "half duplex mode is not supported\n"); 248 phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT); 249 } 250 251 /* Remove 100Mbits half-duplex due to RGMII misreporting connection 252 * as full duplex */ 253 phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT); 254 255 /* remove unsupported modes */ 256 phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT); 257 phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_Pause_BIT); 258 phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_Asym_Pause_BIT); 259 260 if (emac->phy_if == PHY_INTERFACE_MODE_MII) 261 phy_set_max_speed(ndev->phydev, SPEED_100); 262 263 return 0; 264 } 265 266 /* get one packet from requested flow_id 267 * 268 * Returns skb pointer if packet found else NULL 269 * Caller must free the returned skb. 270 */ 271 static struct sk_buff *prueth_process_rx_mgm(struct prueth_emac *emac, 272 u32 flow_id) 273 { 274 struct prueth_rx_chn *rx_chn = &emac->rx_mgm_chn; 275 struct net_device *ndev = emac->ndev; 276 struct cppi5_host_desc_t *desc_rx; 277 struct sk_buff *skb, *new_skb; 278 dma_addr_t desc_dma, buf_dma; 279 u32 buf_dma_len, pkt_len; 280 void **swdata; 281 int ret; 282 283 ret = k3_udma_glue_pop_rx_chn(rx_chn->rx_chn, flow_id, &desc_dma); 284 if (ret) { 285 if (ret != -ENODATA) 286 netdev_err(ndev, "rx mgm pop: failed: %d\n", ret); 287 return NULL; 288 } 289 290 if (cppi5_desc_is_tdcm(desc_dma)) /* Teardown */ 291 return NULL; 292 293 desc_rx = k3_cppi_desc_pool_dma2virt(rx_chn->desc_pool, desc_dma); 294 295 /* Fix FW bug about incorrect PSDATA size */ 296 if (cppi5_hdesc_get_psdata_size(desc_rx) != PRUETH_NAV_PS_DATA_SIZE) { 297 cppi5_hdesc_update_psdata_size(desc_rx, 298 PRUETH_NAV_PS_DATA_SIZE); 299 } 300 301 swdata = cppi5_hdesc_get_swdata(desc_rx); 302 skb = *swdata; 303 cppi5_hdesc_get_obuf(desc_rx, &buf_dma, &buf_dma_len); 304 pkt_len = cppi5_hdesc_get_pktlen(desc_rx); 305 306 dma_unmap_single(rx_chn->dma_dev, buf_dma, buf_dma_len, DMA_FROM_DEVICE); 307 k3_cppi_desc_pool_free(rx_chn->desc_pool, desc_rx); 308 309 new_skb = netdev_alloc_skb_ip_align(ndev, PRUETH_MAX_PKT_SIZE); 310 /* if allocation fails we drop the packet but push the 311 * descriptor back to the ring with old skb to prevent a stall 312 */ 313 if (!new_skb) { 314 netdev_err(ndev, 315 "skb alloc failed, dropped mgm pkt from flow %d\n", 316 flow_id); 317 new_skb = skb; 318 skb = NULL; /* return NULL */ 319 } else { 320 /* return the filled skb */ 321 skb_put(skb, pkt_len); 322 } 323 324 /* queue another DMA */ 325 ret = prueth_dma_rx_push(emac, new_skb, &emac->rx_mgm_chn); 326 if (WARN_ON(ret < 0)) 327 dev_kfree_skb_any(new_skb); 328 329 return skb; 330 } 331 332 static void prueth_tx_ts_sr1(struct prueth_emac *emac, 333 struct emac_tx_ts_response_sr1 *tsr) 334 { 335 struct skb_shared_hwtstamps ssh; 336 u32 hi_ts, lo_ts, cookie; 337 struct sk_buff *skb; 338 u64 ns; 339 340 hi_ts = le32_to_cpu(tsr->hi_ts); 341 lo_ts = le32_to_cpu(tsr->lo_ts); 342 343 ns = (u64)hi_ts << 32 | lo_ts; 344 345 cookie = le32_to_cpu(tsr->cookie); 346 if (cookie >= PRUETH_MAX_TX_TS_REQUESTS) { 347 netdev_dbg(emac->ndev, "Invalid TX TS cookie 0x%x\n", 348 cookie); 349 return; 350 } 351 352 skb = emac->tx_ts_skb[cookie]; 353 emac->tx_ts_skb[cookie] = NULL; /* free slot */ 354 355 memset(&ssh, 0, sizeof(ssh)); 356 ssh.hwtstamp = ns_to_ktime(ns); 357 358 skb_tstamp_tx(skb, &ssh); 359 dev_consume_skb_any(skb); 360 } 361 362 static irqreturn_t prueth_rx_mgm_ts_thread_sr1(int irq, void *dev_id) 363 { 364 struct prueth_emac *emac = dev_id; 365 struct sk_buff *skb; 366 367 skb = prueth_process_rx_mgm(emac, PRUETH_RX_MGM_FLOW_TIMESTAMP_SR1); 368 if (!skb) 369 return IRQ_NONE; 370 371 prueth_tx_ts_sr1(emac, (void *)skb->data); 372 dev_kfree_skb_any(skb); 373 374 return IRQ_HANDLED; 375 } 376 377 static irqreturn_t prueth_rx_mgm_rsp_thread(int irq, void *dev_id) 378 { 379 struct prueth_emac *emac = dev_id; 380 struct sk_buff *skb; 381 u32 rsp; 382 383 skb = prueth_process_rx_mgm(emac, PRUETH_RX_MGM_FLOW_RESPONSE_SR1); 384 if (!skb) 385 return IRQ_NONE; 386 387 /* Process command response */ 388 rsp = le32_to_cpu(*(__le32 *)skb->data) & 0xffff0000; 389 if (rsp == ICSSG_SHUTDOWN_CMD_SR1) { 390 netdev_dbg(emac->ndev, "f/w Shutdown cmd resp %x\n", rsp); 391 complete(&emac->cmd_complete); 392 } else if (rsp == ICSSG_PSTATE_SPEED_DUPLEX_CMD_SR1) { 393 netdev_dbg(emac->ndev, "f/w Speed/Duplex cmd rsp %x\n", rsp); 394 complete(&emac->cmd_complete); 395 } 396 397 dev_kfree_skb_any(skb); 398 399 return IRQ_HANDLED; 400 } 401 402 static struct icssg_firmwares icssg_sr1_emac_firmwares[] = { 403 { 404 .pru = "ti-pruss/am65x-pru0-prueth-fw.elf", 405 .rtu = "ti-pruss/am65x-rtu0-prueth-fw.elf", 406 }, 407 { 408 .pru = "ti-pruss/am65x-pru1-prueth-fw.elf", 409 .rtu = "ti-pruss/am65x-rtu1-prueth-fw.elf", 410 } 411 }; 412 413 static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac) 414 { 415 struct icssg_firmwares *firmwares; 416 struct device *dev = prueth->dev; 417 int slice, ret; 418 419 firmwares = icssg_sr1_emac_firmwares; 420 421 slice = prueth_emac_slice(emac); 422 if (slice < 0) { 423 netdev_err(emac->ndev, "invalid port\n"); 424 return -EINVAL; 425 } 426 427 icssg_config_sr1(prueth, emac, slice); 428 429 ret = rproc_set_firmware(prueth->pru[slice], firmwares[slice].pru); 430 ret = rproc_boot(prueth->pru[slice]); 431 if (ret) { 432 dev_err(dev, "failed to boot PRU%d: %d\n", slice, ret); 433 return -EINVAL; 434 } 435 436 ret = rproc_set_firmware(prueth->rtu[slice], firmwares[slice].rtu); 437 ret = rproc_boot(prueth->rtu[slice]); 438 if (ret) { 439 dev_err(dev, "failed to boot RTU%d: %d\n", slice, ret); 440 goto halt_pru; 441 } 442 443 emac->fw_running = 1; 444 return 0; 445 446 halt_pru: 447 rproc_shutdown(prueth->pru[slice]); 448 449 return ret; 450 } 451 452 /** 453 * emac_ndo_open - EMAC device open 454 * @ndev: network adapter device 455 * 456 * Called when system wants to start the interface. 457 * 458 * Return: 0 for a successful open, or appropriate error code 459 */ 460 static int emac_ndo_open(struct net_device *ndev) 461 { 462 struct prueth_emac *emac = netdev_priv(ndev); 463 int num_data_chn = emac->tx_ch_num - 1; 464 struct prueth *prueth = emac->prueth; 465 int slice = prueth_emac_slice(emac); 466 struct device *dev = prueth->dev; 467 int max_rx_flows, rx_flow; 468 int ret, i; 469 470 /* clear SMEM and MSMC settings for all slices */ 471 if (!prueth->emacs_initialized) { 472 memset_io(prueth->msmcram.va, 0, prueth->msmcram.size); 473 memset_io(prueth->shram.va, 0, ICSSG_CONFIG_OFFSET_SLICE1 * PRUETH_NUM_MACS); 474 } 475 476 /* set h/w MAC as user might have re-configured */ 477 ether_addr_copy(emac->mac_addr, ndev->dev_addr); 478 479 icssg_class_set_mac_addr(prueth->miig_rt, slice, emac->mac_addr); 480 481 icssg_class_default(prueth->miig_rt, slice, 0, true); 482 483 /* Notify the stack of the actual queue counts. */ 484 ret = netif_set_real_num_tx_queues(ndev, num_data_chn); 485 if (ret) { 486 dev_err(dev, "cannot set real number of tx queues\n"); 487 return ret; 488 } 489 490 init_completion(&emac->cmd_complete); 491 ret = prueth_init_tx_chns(emac); 492 if (ret) { 493 dev_err(dev, "failed to init tx channel: %d\n", ret); 494 return ret; 495 } 496 497 max_rx_flows = PRUETH_MAX_RX_FLOWS_SR1; 498 ret = prueth_init_rx_chns(emac, &emac->rx_chns, "rx", 499 max_rx_flows, PRUETH_MAX_RX_DESC); 500 if (ret) { 501 dev_err(dev, "failed to init rx channel: %d\n", ret); 502 goto cleanup_tx; 503 } 504 505 ret = prueth_init_rx_chns(emac, &emac->rx_mgm_chn, "rxmgm", 506 PRUETH_MAX_RX_MGM_FLOWS_SR1, 507 PRUETH_MAX_RX_MGM_DESC_SR1); 508 if (ret) { 509 dev_err(dev, "failed to init rx mgmt channel: %d\n", 510 ret); 511 goto cleanup_rx; 512 } 513 514 ret = prueth_ndev_add_tx_napi(emac); 515 if (ret) 516 goto cleanup_rx_mgm; 517 518 /* we use only the highest priority flow for now i.e. @irq[3] */ 519 rx_flow = PRUETH_RX_FLOW_DATA_SR1; 520 ret = request_irq(emac->rx_chns.irq[rx_flow], prueth_rx_irq, 521 IRQF_TRIGGER_HIGH, dev_name(dev), emac); 522 if (ret) { 523 dev_err(dev, "unable to request RX IRQ\n"); 524 goto cleanup_napi; 525 } 526 527 ret = request_threaded_irq(emac->rx_mgm_chn.irq[PRUETH_RX_MGM_FLOW_RESPONSE_SR1], 528 NULL, prueth_rx_mgm_rsp_thread, 529 IRQF_ONESHOT | IRQF_TRIGGER_HIGH, 530 dev_name(dev), emac); 531 if (ret) { 532 dev_err(dev, "unable to request RX Management RSP IRQ\n"); 533 goto free_rx_irq; 534 } 535 536 ret = request_threaded_irq(emac->rx_mgm_chn.irq[PRUETH_RX_MGM_FLOW_TIMESTAMP_SR1], 537 NULL, prueth_rx_mgm_ts_thread_sr1, 538 IRQF_ONESHOT | IRQF_TRIGGER_HIGH, 539 dev_name(dev), emac); 540 if (ret) { 541 dev_err(dev, "unable to request RX Management TS IRQ\n"); 542 goto free_rx_mgm_rsp_irq; 543 } 544 545 /* reset and start PRU firmware */ 546 ret = prueth_emac_start(prueth, emac); 547 if (ret) 548 goto free_rx_mgmt_ts_irq; 549 550 icssg_mii_update_mtu(prueth->mii_rt, slice, ndev->max_mtu); 551 552 /* Prepare RX */ 553 ret = prueth_prepare_rx_chan(emac, &emac->rx_chns, PRUETH_MAX_PKT_SIZE); 554 if (ret) 555 goto stop; 556 557 ret = prueth_prepare_rx_chan(emac, &emac->rx_mgm_chn, 64); 558 if (ret) 559 goto reset_rx_chn; 560 561 ret = k3_udma_glue_enable_rx_chn(emac->rx_mgm_chn.rx_chn); 562 if (ret) 563 goto reset_rx_chn; 564 565 ret = k3_udma_glue_enable_rx_chn(emac->rx_chns.rx_chn); 566 if (ret) 567 goto reset_rx_mgm_chn; 568 569 for (i = 0; i < emac->tx_ch_num; i++) { 570 ret = k3_udma_glue_enable_tx_chn(emac->tx_chns[i].tx_chn); 571 if (ret) 572 goto reset_tx_chan; 573 } 574 575 /* Enable NAPI in Tx and Rx direction */ 576 for (i = 0; i < emac->tx_ch_num; i++) 577 napi_enable(&emac->tx_chns[i].napi_tx); 578 napi_enable(&emac->napi_rx); 579 580 /* start PHY */ 581 phy_start(ndev->phydev); 582 583 prueth->emacs_initialized++; 584 585 queue_work(system_long_wq, &emac->stats_work.work); 586 587 return 0; 588 589 reset_tx_chan: 590 /* Since interface is not yet up, there is wouldn't be 591 * any SKB for completion. So set false to free_skb 592 */ 593 prueth_reset_tx_chan(emac, i, false); 594 reset_rx_mgm_chn: 595 prueth_reset_rx_chan(&emac->rx_mgm_chn, 596 PRUETH_MAX_RX_MGM_FLOWS_SR1, true); 597 reset_rx_chn: 598 prueth_reset_rx_chan(&emac->rx_chns, max_rx_flows, false); 599 stop: 600 prueth_emac_stop(emac); 601 free_rx_mgmt_ts_irq: 602 free_irq(emac->rx_mgm_chn.irq[PRUETH_RX_MGM_FLOW_TIMESTAMP_SR1], 603 emac); 604 free_rx_mgm_rsp_irq: 605 free_irq(emac->rx_mgm_chn.irq[PRUETH_RX_MGM_FLOW_RESPONSE_SR1], 606 emac); 607 free_rx_irq: 608 free_irq(emac->rx_chns.irq[rx_flow], emac); 609 cleanup_napi: 610 prueth_ndev_del_tx_napi(emac, emac->tx_ch_num); 611 cleanup_rx_mgm: 612 prueth_cleanup_rx_chns(emac, &emac->rx_mgm_chn, 613 PRUETH_MAX_RX_MGM_FLOWS_SR1); 614 cleanup_rx: 615 prueth_cleanup_rx_chns(emac, &emac->rx_chns, max_rx_flows); 616 cleanup_tx: 617 prueth_cleanup_tx_chns(emac); 618 619 return ret; 620 } 621 622 /** 623 * emac_ndo_stop - EMAC device stop 624 * @ndev: network adapter device 625 * 626 * Called when system wants to stop or down the interface. 627 * 628 * Return: Always 0 (Success) 629 */ 630 static int emac_ndo_stop(struct net_device *ndev) 631 { 632 struct prueth_emac *emac = netdev_priv(ndev); 633 int rx_flow = PRUETH_RX_FLOW_DATA_SR1; 634 struct prueth *prueth = emac->prueth; 635 int max_rx_flows; 636 int ret, i; 637 638 /* inform the upper layers. */ 639 netif_tx_stop_all_queues(ndev); 640 641 /* block packets from wire */ 642 if (ndev->phydev) 643 phy_stop(ndev->phydev); 644 645 icssg_class_disable(prueth->miig_rt, prueth_emac_slice(emac)); 646 647 emac_send_command_sr1(emac, ICSSG_SHUTDOWN_CMD_SR1); 648 649 atomic_set(&emac->tdown_cnt, emac->tx_ch_num); 650 /* ensure new tdown_cnt value is visible */ 651 smp_mb__after_atomic(); 652 /* tear down and disable UDMA channels */ 653 reinit_completion(&emac->tdown_complete); 654 for (i = 0; i < emac->tx_ch_num; i++) 655 k3_udma_glue_tdown_tx_chn(emac->tx_chns[i].tx_chn, false); 656 657 ret = wait_for_completion_timeout(&emac->tdown_complete, 658 msecs_to_jiffies(1000)); 659 if (!ret) 660 netdev_err(ndev, "tx teardown timeout\n"); 661 662 prueth_reset_tx_chan(emac, emac->tx_ch_num, true); 663 for (i = 0; i < emac->tx_ch_num; i++) 664 napi_disable(&emac->tx_chns[i].napi_tx); 665 666 max_rx_flows = PRUETH_MAX_RX_FLOWS_SR1; 667 k3_udma_glue_tdown_rx_chn(emac->rx_chns.rx_chn, true); 668 669 prueth_reset_rx_chan(&emac->rx_chns, max_rx_flows, true); 670 /* Teardown RX MGM channel */ 671 k3_udma_glue_tdown_rx_chn(emac->rx_mgm_chn.rx_chn, true); 672 prueth_reset_rx_chan(&emac->rx_mgm_chn, 673 PRUETH_MAX_RX_MGM_FLOWS_SR1, true); 674 675 napi_disable(&emac->napi_rx); 676 677 /* Destroying the queued work in ndo_stop() */ 678 cancel_delayed_work_sync(&emac->stats_work); 679 680 /* stop PRUs */ 681 prueth_emac_stop(emac); 682 683 free_irq(emac->rx_mgm_chn.irq[PRUETH_RX_MGM_FLOW_TIMESTAMP_SR1], emac); 684 free_irq(emac->rx_mgm_chn.irq[PRUETH_RX_MGM_FLOW_RESPONSE_SR1], emac); 685 free_irq(emac->rx_chns.irq[rx_flow], emac); 686 prueth_ndev_del_tx_napi(emac, emac->tx_ch_num); 687 prueth_cleanup_tx_chns(emac); 688 689 prueth_cleanup_rx_chns(emac, &emac->rx_mgm_chn, PRUETH_MAX_RX_MGM_FLOWS_SR1); 690 prueth_cleanup_rx_chns(emac, &emac->rx_chns, max_rx_flows); 691 692 prueth->emacs_initialized--; 693 694 return 0; 695 } 696 697 static void emac_ndo_set_rx_mode_sr1(struct net_device *ndev) 698 { 699 struct prueth_emac *emac = netdev_priv(ndev); 700 bool allmulti = ndev->flags & IFF_ALLMULTI; 701 bool promisc = ndev->flags & IFF_PROMISC; 702 struct prueth *prueth = emac->prueth; 703 int slice = prueth_emac_slice(emac); 704 705 if (promisc) { 706 icssg_class_promiscuous_sr1(prueth->miig_rt, slice); 707 return; 708 } 709 710 if (allmulti) { 711 icssg_class_default(prueth->miig_rt, slice, 1, true); 712 return; 713 } 714 715 icssg_class_default(prueth->miig_rt, slice, 0, true); 716 if (!netdev_mc_empty(ndev)) { 717 /* program multicast address list into Classifier */ 718 icssg_class_add_mcast_sr1(prueth->miig_rt, slice, ndev); 719 } 720 } 721 722 static const struct net_device_ops emac_netdev_ops = { 723 .ndo_open = emac_ndo_open, 724 .ndo_stop = emac_ndo_stop, 725 .ndo_start_xmit = icssg_ndo_start_xmit, 726 .ndo_set_mac_address = eth_mac_addr, 727 .ndo_validate_addr = eth_validate_addr, 728 .ndo_tx_timeout = icssg_ndo_tx_timeout, 729 .ndo_set_rx_mode = emac_ndo_set_rx_mode_sr1, 730 .ndo_eth_ioctl = icssg_ndo_ioctl, 731 .ndo_get_stats64 = icssg_ndo_get_stats64, 732 .ndo_get_phys_port_name = icssg_ndo_get_phys_port_name, 733 }; 734 735 static int prueth_netdev_init(struct prueth *prueth, 736 struct device_node *eth_node) 737 { 738 struct prueth_emac *emac; 739 struct net_device *ndev; 740 enum prueth_port port; 741 enum prueth_mac mac; 742 /* Only enable one TX channel due to timeouts when 743 * using multiple channels */ 744 int num_tx_chn = 1; 745 int ret; 746 747 port = prueth_node_port(eth_node); 748 if (port == PRUETH_PORT_INVALID) 749 return -EINVAL; 750 751 mac = prueth_node_mac(eth_node); 752 if (mac == PRUETH_MAC_INVALID) 753 return -EINVAL; 754 755 ndev = alloc_etherdev_mq(sizeof(*emac), num_tx_chn); 756 if (!ndev) 757 return -ENOMEM; 758 759 emac = netdev_priv(ndev); 760 emac->is_sr1 = 1; 761 emac->prueth = prueth; 762 emac->ndev = ndev; 763 emac->port_id = port; 764 emac->cmd_wq = create_singlethread_workqueue("icssg_cmd_wq"); 765 if (!emac->cmd_wq) { 766 ret = -ENOMEM; 767 goto free_ndev; 768 } 769 770 INIT_DELAYED_WORK(&emac->stats_work, icssg_stats_work_handler); 771 772 ret = pruss_request_mem_region(prueth->pruss, 773 port == PRUETH_PORT_MII0 ? 774 PRUSS_MEM_DRAM0 : PRUSS_MEM_DRAM1, 775 &emac->dram); 776 if (ret) { 777 dev_err(prueth->dev, "unable to get DRAM: %d\n", ret); 778 ret = -ENOMEM; 779 goto free_wq; 780 } 781 782 /* SR1.0 uses a dedicated high priority channel 783 * to send commands to the firmware 784 */ 785 emac->tx_ch_num = 2; 786 787 SET_NETDEV_DEV(ndev, prueth->dev); 788 spin_lock_init(&emac->lock); 789 mutex_init(&emac->cmd_lock); 790 791 emac->phy_node = of_parse_phandle(eth_node, "phy-handle", 0); 792 if (!emac->phy_node && !of_phy_is_fixed_link(eth_node)) { 793 dev_err(prueth->dev, "couldn't find phy-handle\n"); 794 ret = -ENODEV; 795 goto free; 796 } else if (of_phy_is_fixed_link(eth_node)) { 797 ret = of_phy_register_fixed_link(eth_node); 798 if (ret) { 799 ret = dev_err_probe(prueth->dev, ret, 800 "failed to register fixed-link phy\n"); 801 goto free; 802 } 803 804 emac->phy_node = eth_node; 805 } 806 807 ret = of_get_phy_mode(eth_node, &emac->phy_if); 808 if (ret) { 809 dev_err(prueth->dev, "could not get phy-mode property\n"); 810 goto free; 811 } 812 813 if (emac->phy_if != PHY_INTERFACE_MODE_MII && 814 !phy_interface_mode_is_rgmii(emac->phy_if)) { 815 dev_err(prueth->dev, "PHY mode unsupported %s\n", phy_modes(emac->phy_if)); 816 ret = -EINVAL; 817 goto free; 818 } 819 820 /* AM65 SR2.0 has TX Internal delay always enabled by hardware 821 * and it is not possible to disable TX Internal delay. The below 822 * switch case block describes how we handle different phy modes 823 * based on hardware restriction. 824 */ 825 switch (emac->phy_if) { 826 case PHY_INTERFACE_MODE_RGMII_ID: 827 emac->phy_if = PHY_INTERFACE_MODE_RGMII_RXID; 828 break; 829 case PHY_INTERFACE_MODE_RGMII_TXID: 830 emac->phy_if = PHY_INTERFACE_MODE_RGMII; 831 break; 832 case PHY_INTERFACE_MODE_RGMII: 833 case PHY_INTERFACE_MODE_RGMII_RXID: 834 dev_err(prueth->dev, "RGMII mode without TX delay is not supported"); 835 ret = -EINVAL; 836 goto free; 837 default: 838 break; 839 } 840 841 /* get mac address from DT and set private and netdev addr */ 842 ret = of_get_ethdev_address(eth_node, ndev); 843 if (!is_valid_ether_addr(ndev->dev_addr)) { 844 eth_hw_addr_random(ndev); 845 dev_warn(prueth->dev, "port %d: using random MAC addr: %pM\n", 846 port, ndev->dev_addr); 847 } 848 ether_addr_copy(emac->mac_addr, ndev->dev_addr); 849 850 ndev->dev.of_node = eth_node; 851 ndev->min_mtu = PRUETH_MIN_PKT_SIZE; 852 ndev->max_mtu = PRUETH_MAX_MTU; 853 ndev->netdev_ops = &emac_netdev_ops; 854 ndev->ethtool_ops = &icssg_ethtool_ops; 855 ndev->hw_features = NETIF_F_SG; 856 ndev->features = ndev->hw_features; 857 858 netif_napi_add(ndev, &emac->napi_rx, icssg_napi_rx_poll); 859 prueth->emac[mac] = emac; 860 861 return 0; 862 863 free: 864 pruss_release_mem_region(prueth->pruss, &emac->dram); 865 free_wq: 866 destroy_workqueue(emac->cmd_wq); 867 free_ndev: 868 emac->ndev = NULL; 869 prueth->emac[mac] = NULL; 870 free_netdev(ndev); 871 872 return ret; 873 } 874 875 static int prueth_probe(struct platform_device *pdev) 876 { 877 struct device_node *eth_node, *eth_ports_node; 878 struct device_node *eth0_node = NULL; 879 struct device_node *eth1_node = NULL; 880 struct device *dev = &pdev->dev; 881 struct device_node *np; 882 struct prueth *prueth; 883 struct pruss *pruss; 884 u32 msmc_ram_size; 885 int i, ret; 886 887 np = dev->of_node; 888 889 prueth = devm_kzalloc(dev, sizeof(*prueth), GFP_KERNEL); 890 if (!prueth) 891 return -ENOMEM; 892 893 dev_set_drvdata(dev, prueth); 894 prueth->pdev = pdev; 895 prueth->pdata = *(const struct prueth_pdata *)device_get_match_data(dev); 896 897 prueth->dev = dev; 898 eth_ports_node = of_get_child_by_name(np, "ethernet-ports"); 899 if (!eth_ports_node) 900 return -ENOENT; 901 902 for_each_child_of_node(eth_ports_node, eth_node) { 903 u32 reg; 904 905 if (strcmp(eth_node->name, "port")) 906 continue; 907 ret = of_property_read_u32(eth_node, "reg", ®); 908 if (ret < 0) { 909 dev_err(dev, "%pOF error reading port_id %d\n", 910 eth_node, ret); 911 } 912 913 of_node_get(eth_node); 914 915 if (reg == 0) { 916 eth0_node = eth_node; 917 if (!of_device_is_available(eth0_node)) { 918 of_node_put(eth0_node); 919 eth0_node = NULL; 920 } 921 } else if (reg == 1) { 922 eth1_node = eth_node; 923 if (!of_device_is_available(eth1_node)) { 924 of_node_put(eth1_node); 925 eth1_node = NULL; 926 } 927 } else { 928 dev_err(dev, "port reg should be 0 or 1\n"); 929 } 930 } 931 932 of_node_put(eth_ports_node); 933 934 /* At least one node must be present and available else we fail */ 935 if (!eth0_node && !eth1_node) { 936 dev_err(dev, "neither port0 nor port1 node available\n"); 937 return -ENODEV; 938 } 939 940 if (eth0_node == eth1_node) { 941 dev_err(dev, "port0 and port1 can't have same reg\n"); 942 of_node_put(eth0_node); 943 return -ENODEV; 944 } 945 946 prueth->eth_node[PRUETH_MAC0] = eth0_node; 947 prueth->eth_node[PRUETH_MAC1] = eth1_node; 948 949 prueth->miig_rt = syscon_regmap_lookup_by_phandle(np, "ti,mii-g-rt"); 950 if (IS_ERR(prueth->miig_rt)) { 951 dev_err(dev, "couldn't get ti,mii-g-rt syscon regmap\n"); 952 return -ENODEV; 953 } 954 955 prueth->mii_rt = syscon_regmap_lookup_by_phandle(np, "ti,mii-rt"); 956 if (IS_ERR(prueth->mii_rt)) { 957 dev_err(dev, "couldn't get ti,mii-rt syscon regmap\n"); 958 return -ENODEV; 959 } 960 961 if (eth0_node) { 962 ret = prueth_get_cores(prueth, ICSS_SLICE0, true); 963 if (ret) 964 goto put_cores; 965 } 966 967 if (eth1_node) { 968 ret = prueth_get_cores(prueth, ICSS_SLICE1, true); 969 if (ret) 970 goto put_cores; 971 } 972 973 pruss = pruss_get(eth0_node ? 974 prueth->pru[ICSS_SLICE0] : prueth->pru[ICSS_SLICE1]); 975 if (IS_ERR(pruss)) { 976 ret = PTR_ERR(pruss); 977 dev_err(dev, "unable to get pruss handle\n"); 978 goto put_cores; 979 } 980 981 prueth->pruss = pruss; 982 983 ret = pruss_request_mem_region(pruss, PRUSS_MEM_SHRD_RAM2, 984 &prueth->shram); 985 if (ret) { 986 dev_err(dev, "unable to get PRUSS SHRD RAM2: %d\n", ret); 987 goto put_pruss; 988 } 989 990 prueth->sram_pool = of_gen_pool_get(np, "sram", 0); 991 if (!prueth->sram_pool) { 992 dev_err(dev, "unable to get SRAM pool\n"); 993 ret = -ENODEV; 994 995 goto put_mem; 996 } 997 998 msmc_ram_size = MSMC_RAM_SIZE_SR1; 999 1000 prueth->msmcram.va = (void __iomem *)gen_pool_alloc(prueth->sram_pool, 1001 msmc_ram_size); 1002 1003 if (!prueth->msmcram.va) { 1004 ret = -ENOMEM; 1005 dev_err(dev, "unable to allocate MSMC resource\n"); 1006 goto put_mem; 1007 } 1008 prueth->msmcram.pa = gen_pool_virt_to_phys(prueth->sram_pool, 1009 (unsigned long)prueth->msmcram.va); 1010 prueth->msmcram.size = msmc_ram_size; 1011 memset_io(prueth->msmcram.va, 0, msmc_ram_size); 1012 dev_dbg(dev, "sram: pa %llx va %p size %zx\n", prueth->msmcram.pa, 1013 prueth->msmcram.va, prueth->msmcram.size); 1014 1015 prueth->iep0 = icss_iep_get_idx(np, 0); 1016 if (IS_ERR(prueth->iep0)) { 1017 ret = dev_err_probe(dev, PTR_ERR(prueth->iep0), 1018 "iep0 get failed\n"); 1019 goto free_pool; 1020 } 1021 1022 prueth->iep1 = icss_iep_get_idx(np, 1); 1023 if (IS_ERR(prueth->iep1)) { 1024 ret = dev_err_probe(dev, PTR_ERR(prueth->iep1), 1025 "iep1 get failed\n"); 1026 goto put_iep0; 1027 } 1028 1029 ret = icss_iep_init(prueth->iep0, NULL, NULL, 0); 1030 if (ret) { 1031 dev_err_probe(dev, ret, "failed to init iep0\n"); 1032 goto put_iep; 1033 } 1034 1035 ret = icss_iep_init(prueth->iep1, NULL, NULL, 0); 1036 if (ret) { 1037 dev_err_probe(dev, ret, "failed to init iep1\n"); 1038 goto exit_iep0; 1039 } 1040 1041 if (eth0_node) { 1042 ret = prueth_netdev_init(prueth, eth0_node); 1043 if (ret) { 1044 dev_err_probe(dev, ret, "netdev init %s failed\n", 1045 eth0_node->name); 1046 goto exit_iep; 1047 } 1048 1049 prueth->emac[PRUETH_MAC0]->half_duplex = 1050 of_property_read_bool(eth0_node, "ti,half-duplex-capable"); 1051 1052 prueth->emac[PRUETH_MAC0]->iep = prueth->iep0; 1053 } 1054 1055 if (eth1_node) { 1056 ret = prueth_netdev_init(prueth, eth1_node); 1057 if (ret) { 1058 dev_err_probe(dev, ret, "netdev init %s failed\n", 1059 eth1_node->name); 1060 goto netdev_exit; 1061 } 1062 1063 prueth->emac[PRUETH_MAC1]->half_duplex = 1064 of_property_read_bool(eth1_node, "ti,half-duplex-capable"); 1065 1066 prueth->emac[PRUETH_MAC1]->iep = prueth->iep1; 1067 } 1068 1069 /* register the network devices */ 1070 if (eth0_node) { 1071 ret = register_netdev(prueth->emac[PRUETH_MAC0]->ndev); 1072 if (ret) { 1073 dev_err(dev, "can't register netdev for port MII0\n"); 1074 goto netdev_exit; 1075 } 1076 1077 prueth->registered_netdevs[PRUETH_MAC0] = prueth->emac[PRUETH_MAC0]->ndev; 1078 emac_phy_connect(prueth->emac[PRUETH_MAC0]); 1079 phy_attached_info(prueth->emac[PRUETH_MAC0]->ndev->phydev); 1080 } 1081 1082 if (eth1_node) { 1083 ret = register_netdev(prueth->emac[PRUETH_MAC1]->ndev); 1084 if (ret) { 1085 dev_err(dev, "can't register netdev for port MII1\n"); 1086 goto netdev_unregister; 1087 } 1088 1089 prueth->registered_netdevs[PRUETH_MAC1] = prueth->emac[PRUETH_MAC1]->ndev; 1090 emac_phy_connect(prueth->emac[PRUETH_MAC1]); 1091 phy_attached_info(prueth->emac[PRUETH_MAC1]->ndev->phydev); 1092 } 1093 1094 dev_info(dev, "TI PRU SR1.0 ethernet driver initialized: %s EMAC mode\n", 1095 (!eth0_node || !eth1_node) ? "single" : "dual"); 1096 1097 if (eth1_node) 1098 of_node_put(eth1_node); 1099 if (eth0_node) 1100 of_node_put(eth0_node); 1101 1102 return 0; 1103 1104 netdev_unregister: 1105 for (i = 0; i < PRUETH_NUM_MACS; i++) { 1106 if (!prueth->registered_netdevs[i]) 1107 continue; 1108 1109 if (prueth->emac[i]->ndev->phydev) { 1110 phy_disconnect(prueth->emac[i]->ndev->phydev); 1111 prueth->emac[i]->ndev->phydev = NULL; 1112 } 1113 unregister_netdev(prueth->registered_netdevs[i]); 1114 } 1115 1116 netdev_exit: 1117 for (i = 0; i < PRUETH_NUM_MACS; i++) { 1118 eth_node = prueth->eth_node[i]; 1119 if (!eth_node) 1120 continue; 1121 1122 prueth_netdev_exit(prueth, eth_node); 1123 } 1124 1125 exit_iep: 1126 icss_iep_exit(prueth->iep1); 1127 exit_iep0: 1128 icss_iep_exit(prueth->iep0); 1129 1130 put_iep: 1131 icss_iep_put(prueth->iep1); 1132 1133 put_iep0: 1134 icss_iep_put(prueth->iep0); 1135 prueth->iep0 = NULL; 1136 prueth->iep1 = NULL; 1137 1138 free_pool: 1139 gen_pool_free(prueth->sram_pool, 1140 (unsigned long)prueth->msmcram.va, msmc_ram_size); 1141 1142 put_mem: 1143 pruss_release_mem_region(prueth->pruss, &prueth->shram); 1144 1145 put_pruss: 1146 pruss_put(prueth->pruss); 1147 1148 put_cores: 1149 if (eth1_node) { 1150 prueth_put_cores(prueth, ICSS_SLICE1); 1151 of_node_put(eth1_node); 1152 } 1153 1154 if (eth0_node) { 1155 prueth_put_cores(prueth, ICSS_SLICE0); 1156 of_node_put(eth0_node); 1157 } 1158 1159 return ret; 1160 } 1161 1162 static void prueth_remove(struct platform_device *pdev) 1163 { 1164 struct prueth *prueth = platform_get_drvdata(pdev); 1165 struct device_node *eth_node; 1166 int i; 1167 1168 for (i = 0; i < PRUETH_NUM_MACS; i++) { 1169 if (!prueth->registered_netdevs[i]) 1170 continue; 1171 phy_stop(prueth->emac[i]->ndev->phydev); 1172 phy_disconnect(prueth->emac[i]->ndev->phydev); 1173 prueth->emac[i]->ndev->phydev = NULL; 1174 unregister_netdev(prueth->registered_netdevs[i]); 1175 } 1176 1177 for (i = 0; i < PRUETH_NUM_MACS; i++) { 1178 eth_node = prueth->eth_node[i]; 1179 if (!eth_node) 1180 continue; 1181 1182 prueth_netdev_exit(prueth, eth_node); 1183 } 1184 1185 icss_iep_exit(prueth->iep1); 1186 icss_iep_exit(prueth->iep0); 1187 1188 icss_iep_put(prueth->iep1); 1189 icss_iep_put(prueth->iep0); 1190 1191 gen_pool_free(prueth->sram_pool, 1192 (unsigned long)prueth->msmcram.va, 1193 MSMC_RAM_SIZE_SR1); 1194 1195 pruss_release_mem_region(prueth->pruss, &prueth->shram); 1196 1197 pruss_put(prueth->pruss); 1198 1199 if (prueth->eth_node[PRUETH_MAC1]) 1200 prueth_put_cores(prueth, ICSS_SLICE1); 1201 1202 if (prueth->eth_node[PRUETH_MAC0]) 1203 prueth_put_cores(prueth, ICSS_SLICE0); 1204 } 1205 1206 static const struct prueth_pdata am654_sr1_icssg_pdata = { 1207 .fdqring_mode = K3_RINGACC_RING_MODE_MESSAGE, 1208 }; 1209 1210 static const struct of_device_id prueth_dt_match[] = { 1211 { .compatible = "ti,am654-sr1-icssg-prueth", .data = &am654_sr1_icssg_pdata }, 1212 { /* sentinel */ } 1213 }; 1214 MODULE_DEVICE_TABLE(of, prueth_dt_match); 1215 1216 static struct platform_driver prueth_driver = { 1217 .probe = prueth_probe, 1218 .remove_new = prueth_remove, 1219 .driver = { 1220 .name = "icssg-prueth-sr1", 1221 .of_match_table = prueth_dt_match, 1222 .pm = &prueth_dev_pm_ops, 1223 }, 1224 }; 1225 module_platform_driver(prueth_driver); 1226 1227 MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>"); 1228 MODULE_AUTHOR("Md Danish Anwar <danishanwar@ti.com>"); 1229 MODULE_AUTHOR("Diogo Ivo <diogo.ivo@siemens.com>"); 1230 MODULE_DESCRIPTION(PRUETH_MODULE_DESCRIPTION); 1231 MODULE_LICENSE("GPL"); 1232