1 // SPDX-License-Identifier: GPL-2.0 2 3 /* Texas Instruments ICSSG Ethernet Driver 4 * 5 * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/ 6 * 7 */ 8 9 #include <linux/bitops.h> 10 #include <linux/clk.h> 11 #include <linux/delay.h> 12 #include <linux/dma-mapping.h> 13 #include <linux/dma/ti-cppi5.h> 14 #include <linux/etherdevice.h> 15 #include <linux/genalloc.h> 16 #include <linux/if_hsr.h> 17 #include <linux/if_vlan.h> 18 #include <linux/interrupt.h> 19 #include <linux/io-64-nonatomic-hi-lo.h> 20 #include <linux/kernel.h> 21 #include <linux/mfd/syscon.h> 22 #include <linux/module.h> 23 #include <linux/of.h> 24 #include <linux/of_mdio.h> 25 #include <linux/of_net.h> 26 #include <linux/platform_device.h> 27 #include <linux/phy.h> 28 #include <linux/property.h> 29 #include <linux/remoteproc/pruss.h> 30 #include <linux/regmap.h> 31 #include <linux/remoteproc.h> 32 #include <net/switchdev.h> 33 34 #include "icssg_prueth.h" 35 #include "icssg_mii_rt.h" 36 #include "icssg_switchdev.h" 37 #include "../k3-cppi-desc-pool.h" 38 39 #define PRUETH_MODULE_DESCRIPTION "PRUSS ICSSG Ethernet driver" 40 41 #define DEFAULT_VID 1 42 #define DEFAULT_PORT_MASK 1 43 #define DEFAULT_UNTAG_MASK 1 44 45 #define NETIF_PRUETH_HSR_OFFLOAD_FEATURES (NETIF_F_HW_HSR_FWD | \ 46 NETIF_F_HW_HSR_DUP | \ 47 NETIF_F_HW_HSR_TAG_INS | \ 48 NETIF_F_HW_HSR_TAG_RM) 49 50 /* CTRLMMR_ICSSG_RGMII_CTRL register bits */ 51 #define ICSSG_CTRL_RGMII_ID_MODE BIT(24) 52 53 static int emac_get_tx_ts(struct prueth_emac *emac, 54 struct emac_tx_ts_response *rsp) 55 { 56 struct prueth *prueth = emac->prueth; 57 int slice = prueth_emac_slice(emac); 58 int addr; 59 60 addr = icssg_queue_pop(prueth, slice == 0 ? 61 ICSSG_TS_POP_SLICE0 : ICSSG_TS_POP_SLICE1); 62 if (addr < 0) 63 return addr; 64 65 memcpy_fromio(rsp, prueth->shram.va + addr, sizeof(*rsp)); 66 /* return buffer back for to pool */ 67 icssg_queue_push(prueth, slice == 0 ? 68 ICSSG_TS_PUSH_SLICE0 : ICSSG_TS_PUSH_SLICE1, addr); 69 70 return 0; 71 } 72 73 static void tx_ts_work(struct prueth_emac *emac) 74 { 75 struct skb_shared_hwtstamps ssh; 76 struct emac_tx_ts_response tsr; 77 struct sk_buff *skb; 78 int ret = 0; 79 u32 hi_sw; 80 u64 ns; 81 82 /* There may be more than one pending requests */ 83 while (1) { 84 ret = emac_get_tx_ts(emac, &tsr); 85 if (ret) /* nothing more */ 86 break; 87 88 if (tsr.cookie >= PRUETH_MAX_TX_TS_REQUESTS || 89 !emac->tx_ts_skb[tsr.cookie]) { 90 netdev_err(emac->ndev, "Invalid TX TS cookie 0x%x\n", 91 tsr.cookie); 92 break; 93 } 94 95 skb = emac->tx_ts_skb[tsr.cookie]; 96 emac->tx_ts_skb[tsr.cookie] = NULL; /* free slot */ 97 if (!skb) { 98 netdev_err(emac->ndev, "Driver Bug! got NULL skb\n"); 99 break; 100 } 101 102 hi_sw = readl(emac->prueth->shram.va + 103 TIMESYNC_FW_WC_COUNT_HI_SW_OFFSET_OFFSET); 104 ns = icssg_ts_to_ns(hi_sw, tsr.hi_ts, tsr.lo_ts, 105 IEP_DEFAULT_CYCLE_TIME_NS); 106 107 memset(&ssh, 0, sizeof(ssh)); 108 ssh.hwtstamp = ns_to_ktime(ns); 109 110 skb_tstamp_tx(skb, &ssh); 111 dev_consume_skb_any(skb); 112 113 if (atomic_dec_and_test(&emac->tx_ts_pending)) /* no more? */ 114 break; 115 } 116 } 117 118 static irqreturn_t prueth_tx_ts_irq(int irq, void *dev_id) 119 { 120 struct prueth_emac *emac = dev_id; 121 122 /* currently only TX timestamp is being returned */ 123 tx_ts_work(emac); 124 125 return IRQ_HANDLED; 126 } 127 128 static struct icssg_firmwares icssg_hsr_firmwares[] = { 129 { 130 .pru = "ti-pruss/am65x-sr2-pru0-pruhsr-fw.elf", 131 .rtu = "ti-pruss/am65x-sr2-rtu0-pruhsr-fw.elf", 132 .txpru = "ti-pruss/am65x-sr2-txpru0-pruhsr-fw.elf", 133 }, 134 { 135 .pru = "ti-pruss/am65x-sr2-pru1-pruhsr-fw.elf", 136 .rtu = "ti-pruss/am65x-sr2-rtu1-pruhsr-fw.elf", 137 .txpru = "ti-pruss/am65x-sr2-txpru1-pruhsr-fw.elf", 138 } 139 }; 140 141 static struct icssg_firmwares icssg_switch_firmwares[] = { 142 { 143 .pru = "ti-pruss/am65x-sr2-pru0-prusw-fw.elf", 144 .rtu = "ti-pruss/am65x-sr2-rtu0-prusw-fw.elf", 145 .txpru = "ti-pruss/am65x-sr2-txpru0-prusw-fw.elf", 146 }, 147 { 148 .pru = "ti-pruss/am65x-sr2-pru1-prusw-fw.elf", 149 .rtu = "ti-pruss/am65x-sr2-rtu1-prusw-fw.elf", 150 .txpru = "ti-pruss/am65x-sr2-txpru1-prusw-fw.elf", 151 } 152 }; 153 154 static struct icssg_firmwares icssg_emac_firmwares[] = { 155 { 156 .pru = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf", 157 .rtu = "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf", 158 .txpru = "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf", 159 }, 160 { 161 .pru = "ti-pruss/am65x-sr2-pru1-prueth-fw.elf", 162 .rtu = "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf", 163 .txpru = "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf", 164 } 165 }; 166 167 static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac) 168 { 169 struct icssg_firmwares *firmwares; 170 struct device *dev = prueth->dev; 171 int slice, ret; 172 173 if (prueth->is_switch_mode) 174 firmwares = icssg_switch_firmwares; 175 else if (prueth->is_hsr_offload_mode) 176 firmwares = icssg_hsr_firmwares; 177 else 178 firmwares = icssg_emac_firmwares; 179 180 slice = prueth_emac_slice(emac); 181 if (slice < 0) { 182 netdev_err(emac->ndev, "invalid port\n"); 183 return -EINVAL; 184 } 185 186 ret = icssg_config(prueth, emac, slice); 187 if (ret) 188 return ret; 189 190 ret = rproc_set_firmware(prueth->pru[slice], firmwares[slice].pru); 191 ret = rproc_boot(prueth->pru[slice]); 192 if (ret) { 193 dev_err(dev, "failed to boot PRU%d: %d\n", slice, ret); 194 return -EINVAL; 195 } 196 197 ret = rproc_set_firmware(prueth->rtu[slice], firmwares[slice].rtu); 198 ret = rproc_boot(prueth->rtu[slice]); 199 if (ret) { 200 dev_err(dev, "failed to boot RTU%d: %d\n", slice, ret); 201 goto halt_pru; 202 } 203 204 ret = rproc_set_firmware(prueth->txpru[slice], firmwares[slice].txpru); 205 ret = rproc_boot(prueth->txpru[slice]); 206 if (ret) { 207 dev_err(dev, "failed to boot TX_PRU%d: %d\n", slice, ret); 208 goto halt_rtu; 209 } 210 211 emac->fw_running = 1; 212 return 0; 213 214 halt_rtu: 215 rproc_shutdown(prueth->rtu[slice]); 216 217 halt_pru: 218 rproc_shutdown(prueth->pru[slice]); 219 220 return ret; 221 } 222 223 /* called back by PHY layer if there is change in link state of hw port*/ 224 static void emac_adjust_link(struct net_device *ndev) 225 { 226 struct prueth_emac *emac = netdev_priv(ndev); 227 struct phy_device *phydev = ndev->phydev; 228 struct prueth *prueth = emac->prueth; 229 bool new_state = false; 230 unsigned long flags; 231 232 if (phydev->link) { 233 /* check the mode of operation - full/half duplex */ 234 if (phydev->duplex != emac->duplex) { 235 new_state = true; 236 emac->duplex = phydev->duplex; 237 } 238 if (phydev->speed != emac->speed) { 239 new_state = true; 240 emac->speed = phydev->speed; 241 } 242 if (!emac->link) { 243 new_state = true; 244 emac->link = 1; 245 } 246 } else if (emac->link) { 247 new_state = true; 248 emac->link = 0; 249 250 /* f/w should support 100 & 1000 */ 251 emac->speed = SPEED_1000; 252 253 /* half duplex may not be supported by f/w */ 254 emac->duplex = DUPLEX_FULL; 255 } 256 257 if (new_state) { 258 phy_print_status(phydev); 259 260 /* update RGMII and MII configuration based on PHY negotiated 261 * values 262 */ 263 if (emac->link) { 264 if (emac->duplex == DUPLEX_HALF) 265 icssg_config_half_duplex(emac); 266 /* Set the RGMII cfg for gig en and full duplex */ 267 icssg_update_rgmii_cfg(prueth->miig_rt, emac); 268 269 /* update the Tx IPG based on 100M/1G speed */ 270 spin_lock_irqsave(&emac->lock, flags); 271 icssg_config_ipg(emac); 272 spin_unlock_irqrestore(&emac->lock, flags); 273 icssg_config_set_speed(emac); 274 icssg_set_port_state(emac, ICSSG_EMAC_PORT_FORWARD); 275 276 } else { 277 icssg_set_port_state(emac, ICSSG_EMAC_PORT_DISABLE); 278 } 279 } 280 281 if (emac->link) { 282 /* reactivate the transmit queue */ 283 netif_tx_wake_all_queues(ndev); 284 } else { 285 netif_tx_stop_all_queues(ndev); 286 prueth_cleanup_tx_ts(emac); 287 } 288 } 289 290 static enum hrtimer_restart emac_rx_timer_callback(struct hrtimer *timer) 291 { 292 struct prueth_emac *emac = 293 container_of(timer, struct prueth_emac, rx_hrtimer); 294 int rx_flow = PRUETH_RX_FLOW_DATA; 295 296 enable_irq(emac->rx_chns.irq[rx_flow]); 297 return HRTIMER_NORESTART; 298 } 299 300 static int emac_phy_connect(struct prueth_emac *emac) 301 { 302 struct prueth *prueth = emac->prueth; 303 struct net_device *ndev = emac->ndev; 304 /* connect PHY */ 305 ndev->phydev = of_phy_connect(emac->ndev, emac->phy_node, 306 &emac_adjust_link, 0, 307 emac->phy_if); 308 if (!ndev->phydev) { 309 dev_err(prueth->dev, "couldn't connect to phy %s\n", 310 emac->phy_node->full_name); 311 return -ENODEV; 312 } 313 314 if (!emac->half_duplex) { 315 dev_dbg(prueth->dev, "half duplex mode is not supported\n"); 316 phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT); 317 phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT); 318 } 319 320 /* remove unsupported modes */ 321 phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT); 322 phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_Pause_BIT); 323 phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_Asym_Pause_BIT); 324 325 if (emac->phy_if == PHY_INTERFACE_MODE_MII) 326 phy_set_max_speed(ndev->phydev, SPEED_100); 327 328 return 0; 329 } 330 331 static u64 prueth_iep_gettime(void *clockops_data, struct ptp_system_timestamp *sts) 332 { 333 u32 hi_rollover_count, hi_rollover_count_r; 334 struct prueth_emac *emac = clockops_data; 335 struct prueth *prueth = emac->prueth; 336 void __iomem *fw_hi_r_count_addr; 337 void __iomem *fw_count_hi_addr; 338 u32 iepcount_hi, iepcount_hi_r; 339 unsigned long flags; 340 u32 iepcount_lo; 341 u64 ts = 0; 342 343 fw_count_hi_addr = prueth->shram.va + TIMESYNC_FW_WC_COUNT_HI_SW_OFFSET_OFFSET; 344 fw_hi_r_count_addr = prueth->shram.va + TIMESYNC_FW_WC_HI_ROLLOVER_COUNT_OFFSET; 345 346 local_irq_save(flags); 347 do { 348 iepcount_hi = icss_iep_get_count_hi(emac->iep); 349 iepcount_hi += readl(fw_count_hi_addr); 350 hi_rollover_count = readl(fw_hi_r_count_addr); 351 ptp_read_system_prets(sts); 352 iepcount_lo = icss_iep_get_count_low(emac->iep); 353 ptp_read_system_postts(sts); 354 355 iepcount_hi_r = icss_iep_get_count_hi(emac->iep); 356 iepcount_hi_r += readl(fw_count_hi_addr); 357 hi_rollover_count_r = readl(fw_hi_r_count_addr); 358 } while ((iepcount_hi_r != iepcount_hi) || 359 (hi_rollover_count != hi_rollover_count_r)); 360 local_irq_restore(flags); 361 362 ts = ((u64)hi_rollover_count) << 23 | iepcount_hi; 363 ts = ts * (u64)IEP_DEFAULT_CYCLE_TIME_NS + iepcount_lo; 364 365 return ts; 366 } 367 368 static void prueth_iep_settime(void *clockops_data, u64 ns) 369 { 370 struct icssg_setclock_desc __iomem *sc_descp; 371 struct prueth_emac *emac = clockops_data; 372 struct icssg_setclock_desc sc_desc; 373 u64 cyclecount; 374 u32 cycletime; 375 int timeout; 376 377 if (!emac->fw_running) 378 return; 379 380 sc_descp = emac->prueth->shram.va + TIMESYNC_FW_WC_SETCLOCK_DESC_OFFSET; 381 382 cycletime = IEP_DEFAULT_CYCLE_TIME_NS; 383 cyclecount = ns / cycletime; 384 385 memset(&sc_desc, 0, sizeof(sc_desc)); 386 sc_desc.margin = cycletime - 1000; 387 sc_desc.cyclecounter0_set = cyclecount & GENMASK(31, 0); 388 sc_desc.cyclecounter1_set = (cyclecount & GENMASK(63, 32)) >> 32; 389 sc_desc.iepcount_set = ns % cycletime; 390 /* Count from 0 to (cycle time) - emac->iep->def_inc */ 391 sc_desc.CMP0_current = cycletime - emac->iep->def_inc; 392 393 memcpy_toio(sc_descp, &sc_desc, sizeof(sc_desc)); 394 395 writeb(1, &sc_descp->request); 396 397 timeout = 5; /* fw should take 2-3 ms */ 398 while (timeout--) { 399 if (readb(&sc_descp->acknowledgment)) 400 return; 401 402 usleep_range(500, 1000); 403 } 404 405 dev_err(emac->prueth->dev, "settime timeout\n"); 406 } 407 408 static int prueth_perout_enable(void *clockops_data, 409 struct ptp_perout_request *req, int on, 410 u64 *cmp) 411 { 412 struct prueth_emac *emac = clockops_data; 413 u32 reduction_factor = 0, offset = 0; 414 struct timespec64 ts; 415 u64 current_cycle; 416 u64 start_offset; 417 u64 ns_period; 418 419 if (!on) 420 return 0; 421 422 /* Any firmware specific stuff for PPS/PEROUT handling */ 423 ts.tv_sec = req->period.sec; 424 ts.tv_nsec = req->period.nsec; 425 ns_period = timespec64_to_ns(&ts); 426 427 /* f/w doesn't support period less than cycle time */ 428 if (ns_period < IEP_DEFAULT_CYCLE_TIME_NS) 429 return -ENXIO; 430 431 reduction_factor = ns_period / IEP_DEFAULT_CYCLE_TIME_NS; 432 offset = ns_period % IEP_DEFAULT_CYCLE_TIME_NS; 433 434 /* f/w requires at least 1uS within a cycle so CMP 435 * can trigger after SYNC is enabled 436 */ 437 if (offset < 5 * NSEC_PER_USEC) 438 offset = 5 * NSEC_PER_USEC; 439 440 /* if offset is close to cycle time then we will miss 441 * the CMP event for last tick when IEP rolls over. 442 * In normal mode, IEP tick is 4ns. 443 * In slow compensation it could be 0ns or 8ns at 444 * every slow compensation cycle. 445 */ 446 if (offset > IEP_DEFAULT_CYCLE_TIME_NS - 8) 447 offset = IEP_DEFAULT_CYCLE_TIME_NS - 8; 448 449 /* we're in shadow mode so need to set upper 32-bits */ 450 *cmp = (u64)offset << 32; 451 452 writel(reduction_factor, emac->prueth->shram.va + 453 TIMESYNC_FW_WC_SYNCOUT_REDUCTION_FACTOR_OFFSET); 454 455 current_cycle = icssg_read_time(emac->prueth->shram.va + 456 TIMESYNC_FW_WC_CYCLECOUNT_OFFSET); 457 458 /* Rounding of current_cycle count to next second */ 459 start_offset = roundup(current_cycle, MSEC_PER_SEC); 460 461 hi_lo_writeq(start_offset, emac->prueth->shram.va + 462 TIMESYNC_FW_WC_SYNCOUT_START_TIME_CYCLECOUNT_OFFSET); 463 464 return 0; 465 } 466 467 const struct icss_iep_clockops prueth_iep_clockops = { 468 .settime = prueth_iep_settime, 469 .gettime = prueth_iep_gettime, 470 .perout_enable = prueth_perout_enable, 471 }; 472 473 static int icssg_prueth_add_mcast(struct net_device *ndev, const u8 *addr) 474 { 475 struct prueth_emac *emac = netdev_priv(ndev); 476 int port_mask = BIT(emac->port_id); 477 478 port_mask |= icssg_fdb_lookup(emac, addr, 0); 479 icssg_fdb_add_del(emac, addr, 0, port_mask, true); 480 icssg_vtbl_modify(emac, 0, port_mask, port_mask, true); 481 482 return 0; 483 } 484 485 static int icssg_prueth_del_mcast(struct net_device *ndev, const u8 *addr) 486 { 487 struct prueth_emac *emac = netdev_priv(ndev); 488 int port_mask = BIT(emac->port_id); 489 int other_port_mask; 490 491 other_port_mask = port_mask ^ icssg_fdb_lookup(emac, addr, 0); 492 493 icssg_fdb_add_del(emac, addr, 0, port_mask, false); 494 icssg_vtbl_modify(emac, 0, port_mask, port_mask, false); 495 496 if (other_port_mask) { 497 icssg_fdb_add_del(emac, addr, 0, other_port_mask, true); 498 icssg_vtbl_modify(emac, 0, other_port_mask, other_port_mask, true); 499 } 500 501 return 0; 502 } 503 504 static int icssg_prueth_hsr_add_mcast(struct net_device *ndev, const u8 *addr) 505 { 506 struct prueth_emac *emac = netdev_priv(ndev); 507 struct prueth *prueth = emac->prueth; 508 509 icssg_fdb_add_del(emac, addr, prueth->default_vlan, 510 ICSSG_FDB_ENTRY_P0_MEMBERSHIP | 511 ICSSG_FDB_ENTRY_P1_MEMBERSHIP | 512 ICSSG_FDB_ENTRY_P2_MEMBERSHIP | 513 ICSSG_FDB_ENTRY_BLOCK, true); 514 515 icssg_vtbl_modify(emac, emac->port_vlan, BIT(emac->port_id), 516 BIT(emac->port_id), true); 517 return 0; 518 } 519 520 static int icssg_prueth_hsr_del_mcast(struct net_device *ndev, const u8 *addr) 521 { 522 struct prueth_emac *emac = netdev_priv(ndev); 523 struct prueth *prueth = emac->prueth; 524 525 icssg_fdb_add_del(emac, addr, prueth->default_vlan, 526 ICSSG_FDB_ENTRY_P0_MEMBERSHIP | 527 ICSSG_FDB_ENTRY_P1_MEMBERSHIP | 528 ICSSG_FDB_ENTRY_P2_MEMBERSHIP | 529 ICSSG_FDB_ENTRY_BLOCK, false); 530 531 return 0; 532 } 533 534 /** 535 * emac_ndo_open - EMAC device open 536 * @ndev: network adapter device 537 * 538 * Called when system wants to start the interface. 539 * 540 * Return: 0 for a successful open, or appropriate error code 541 */ 542 static int emac_ndo_open(struct net_device *ndev) 543 { 544 struct prueth_emac *emac = netdev_priv(ndev); 545 int ret, i, num_data_chn = emac->tx_ch_num; 546 struct prueth *prueth = emac->prueth; 547 int slice = prueth_emac_slice(emac); 548 struct device *dev = prueth->dev; 549 int max_rx_flows; 550 int rx_flow; 551 552 /* clear SMEM and MSMC settings for all slices */ 553 if (!prueth->emacs_initialized) { 554 memset_io(prueth->msmcram.va, 0, prueth->msmcram.size); 555 memset_io(prueth->shram.va, 0, ICSSG_CONFIG_OFFSET_SLICE1 * PRUETH_NUM_MACS); 556 } 557 558 /* set h/w MAC as user might have re-configured */ 559 ether_addr_copy(emac->mac_addr, ndev->dev_addr); 560 561 icssg_class_set_mac_addr(prueth->miig_rt, slice, emac->mac_addr); 562 icssg_class_default(prueth->miig_rt, slice, 0, false); 563 icssg_ft1_set_mac_addr(prueth->miig_rt, slice, emac->mac_addr); 564 565 /* Notify the stack of the actual queue counts. */ 566 ret = netif_set_real_num_tx_queues(ndev, num_data_chn); 567 if (ret) { 568 dev_err(dev, "cannot set real number of tx queues\n"); 569 return ret; 570 } 571 572 init_completion(&emac->cmd_complete); 573 ret = prueth_init_tx_chns(emac); 574 if (ret) { 575 dev_err(dev, "failed to init tx channel: %d\n", ret); 576 return ret; 577 } 578 579 max_rx_flows = PRUETH_MAX_RX_FLOWS; 580 ret = prueth_init_rx_chns(emac, &emac->rx_chns, "rx", 581 max_rx_flows, PRUETH_MAX_RX_DESC); 582 if (ret) { 583 dev_err(dev, "failed to init rx channel: %d\n", ret); 584 goto cleanup_tx; 585 } 586 587 ret = prueth_ndev_add_tx_napi(emac); 588 if (ret) 589 goto cleanup_rx; 590 591 /* we use only the highest priority flow for now i.e. @irq[3] */ 592 rx_flow = PRUETH_RX_FLOW_DATA; 593 ret = request_irq(emac->rx_chns.irq[rx_flow], prueth_rx_irq, 594 IRQF_TRIGGER_HIGH, dev_name(dev), emac); 595 if (ret) { 596 dev_err(dev, "unable to request RX IRQ\n"); 597 goto cleanup_napi; 598 } 599 600 /* reset and start PRU firmware */ 601 ret = prueth_emac_start(prueth, emac); 602 if (ret) 603 goto free_rx_irq; 604 605 icssg_mii_update_mtu(prueth->mii_rt, slice, ndev->max_mtu); 606 607 if (!prueth->emacs_initialized) { 608 ret = icss_iep_init(emac->iep, &prueth_iep_clockops, 609 emac, IEP_DEFAULT_CYCLE_TIME_NS); 610 } 611 612 ret = request_threaded_irq(emac->tx_ts_irq, NULL, prueth_tx_ts_irq, 613 IRQF_ONESHOT, dev_name(dev), emac); 614 if (ret) 615 goto stop; 616 617 /* Prepare RX */ 618 ret = prueth_prepare_rx_chan(emac, &emac->rx_chns, PRUETH_MAX_PKT_SIZE); 619 if (ret) 620 goto free_tx_ts_irq; 621 622 ret = k3_udma_glue_enable_rx_chn(emac->rx_chns.rx_chn); 623 if (ret) 624 goto reset_rx_chn; 625 626 for (i = 0; i < emac->tx_ch_num; i++) { 627 ret = k3_udma_glue_enable_tx_chn(emac->tx_chns[i].tx_chn); 628 if (ret) 629 goto reset_tx_chan; 630 } 631 632 /* Enable NAPI in Tx and Rx direction */ 633 for (i = 0; i < emac->tx_ch_num; i++) 634 napi_enable(&emac->tx_chns[i].napi_tx); 635 napi_enable(&emac->napi_rx); 636 637 /* start PHY */ 638 phy_start(ndev->phydev); 639 640 prueth->emacs_initialized++; 641 642 queue_work(system_long_wq, &emac->stats_work.work); 643 644 return 0; 645 646 reset_tx_chan: 647 /* Since interface is not yet up, there is wouldn't be 648 * any SKB for completion. So set false to free_skb 649 */ 650 prueth_reset_tx_chan(emac, i, false); 651 reset_rx_chn: 652 prueth_reset_rx_chan(&emac->rx_chns, max_rx_flows, false); 653 free_tx_ts_irq: 654 free_irq(emac->tx_ts_irq, emac); 655 stop: 656 prueth_emac_stop(emac); 657 free_rx_irq: 658 free_irq(emac->rx_chns.irq[rx_flow], emac); 659 cleanup_napi: 660 prueth_ndev_del_tx_napi(emac, emac->tx_ch_num); 661 cleanup_rx: 662 prueth_cleanup_rx_chns(emac, &emac->rx_chns, max_rx_flows); 663 cleanup_tx: 664 prueth_cleanup_tx_chns(emac); 665 666 return ret; 667 } 668 669 /** 670 * emac_ndo_stop - EMAC device stop 671 * @ndev: network adapter device 672 * 673 * Called when system wants to stop or down the interface. 674 * 675 * Return: Always 0 (Success) 676 */ 677 static int emac_ndo_stop(struct net_device *ndev) 678 { 679 struct prueth_emac *emac = netdev_priv(ndev); 680 struct prueth *prueth = emac->prueth; 681 int rx_flow = PRUETH_RX_FLOW_DATA; 682 int max_rx_flows; 683 int ret, i; 684 685 /* inform the upper layers. */ 686 netif_tx_stop_all_queues(ndev); 687 688 /* block packets from wire */ 689 if (ndev->phydev) 690 phy_stop(ndev->phydev); 691 692 icssg_class_disable(prueth->miig_rt, prueth_emac_slice(emac)); 693 694 if (emac->prueth->is_hsr_offload_mode) 695 __dev_mc_unsync(ndev, icssg_prueth_hsr_del_mcast); 696 else 697 __dev_mc_unsync(ndev, icssg_prueth_del_mcast); 698 699 atomic_set(&emac->tdown_cnt, emac->tx_ch_num); 700 /* ensure new tdown_cnt value is visible */ 701 smp_mb__after_atomic(); 702 /* tear down and disable UDMA channels */ 703 reinit_completion(&emac->tdown_complete); 704 for (i = 0; i < emac->tx_ch_num; i++) 705 k3_udma_glue_tdown_tx_chn(emac->tx_chns[i].tx_chn, false); 706 707 ret = wait_for_completion_timeout(&emac->tdown_complete, 708 msecs_to_jiffies(1000)); 709 if (!ret) 710 netdev_err(ndev, "tx teardown timeout\n"); 711 712 prueth_reset_tx_chan(emac, emac->tx_ch_num, true); 713 for (i = 0; i < emac->tx_ch_num; i++) { 714 napi_disable(&emac->tx_chns[i].napi_tx); 715 hrtimer_cancel(&emac->tx_chns[i].tx_hrtimer); 716 } 717 718 max_rx_flows = PRUETH_MAX_RX_FLOWS; 719 k3_udma_glue_tdown_rx_chn(emac->rx_chns.rx_chn, true); 720 721 prueth_reset_rx_chan(&emac->rx_chns, max_rx_flows, true); 722 723 napi_disable(&emac->napi_rx); 724 hrtimer_cancel(&emac->rx_hrtimer); 725 726 cancel_work_sync(&emac->rx_mode_work); 727 728 /* Destroying the queued work in ndo_stop() */ 729 cancel_delayed_work_sync(&emac->stats_work); 730 731 if (prueth->emacs_initialized == 1) 732 icss_iep_exit(emac->iep); 733 734 /* stop PRUs */ 735 prueth_emac_stop(emac); 736 737 free_irq(emac->tx_ts_irq, emac); 738 739 free_irq(emac->rx_chns.irq[rx_flow], emac); 740 prueth_ndev_del_tx_napi(emac, emac->tx_ch_num); 741 742 prueth_cleanup_rx_chns(emac, &emac->rx_chns, max_rx_flows); 743 prueth_cleanup_tx_chns(emac); 744 745 prueth->emacs_initialized--; 746 747 return 0; 748 } 749 750 static void emac_ndo_set_rx_mode_work(struct work_struct *work) 751 { 752 struct prueth_emac *emac = container_of(work, struct prueth_emac, rx_mode_work); 753 struct net_device *ndev = emac->ndev; 754 bool promisc, allmulti; 755 756 if (!netif_running(ndev)) 757 return; 758 759 promisc = ndev->flags & IFF_PROMISC; 760 allmulti = ndev->flags & IFF_ALLMULTI; 761 icssg_set_port_state(emac, ICSSG_EMAC_PORT_UC_FLOODING_DISABLE); 762 icssg_set_port_state(emac, ICSSG_EMAC_PORT_MC_FLOODING_DISABLE); 763 764 if (promisc) { 765 icssg_set_port_state(emac, ICSSG_EMAC_PORT_UC_FLOODING_ENABLE); 766 icssg_set_port_state(emac, ICSSG_EMAC_PORT_MC_FLOODING_ENABLE); 767 return; 768 } 769 770 if (allmulti) { 771 icssg_set_port_state(emac, ICSSG_EMAC_PORT_MC_FLOODING_ENABLE); 772 return; 773 } 774 775 if (emac->prueth->is_hsr_offload_mode) 776 __dev_mc_sync(ndev, icssg_prueth_hsr_add_mcast, 777 icssg_prueth_hsr_del_mcast); 778 else 779 __dev_mc_sync(ndev, icssg_prueth_add_mcast, 780 icssg_prueth_del_mcast); 781 } 782 783 /** 784 * emac_ndo_set_rx_mode - EMAC set receive mode function 785 * @ndev: The EMAC network adapter 786 * 787 * Called when system wants to set the receive mode of the device. 788 * 789 */ 790 static void emac_ndo_set_rx_mode(struct net_device *ndev) 791 { 792 struct prueth_emac *emac = netdev_priv(ndev); 793 794 queue_work(emac->cmd_wq, &emac->rx_mode_work); 795 } 796 797 static netdev_features_t emac_ndo_fix_features(struct net_device *ndev, 798 netdev_features_t features) 799 { 800 /* hsr tag insertion offload and hsr dup offload are tightly coupled in 801 * firmware implementation. Both these features need to be enabled / 802 * disabled together. 803 */ 804 if (!(ndev->features & (NETIF_F_HW_HSR_DUP | NETIF_F_HW_HSR_TAG_INS))) 805 if ((features & NETIF_F_HW_HSR_DUP) || 806 (features & NETIF_F_HW_HSR_TAG_INS)) 807 features |= NETIF_F_HW_HSR_DUP | 808 NETIF_F_HW_HSR_TAG_INS; 809 810 if ((ndev->features & NETIF_F_HW_HSR_DUP) || 811 (ndev->features & NETIF_F_HW_HSR_TAG_INS)) 812 if (!(features & NETIF_F_HW_HSR_DUP) || 813 !(features & NETIF_F_HW_HSR_TAG_INS)) 814 features &= ~(NETIF_F_HW_HSR_DUP | 815 NETIF_F_HW_HSR_TAG_INS); 816 817 return features; 818 } 819 820 static int emac_ndo_vlan_rx_add_vid(struct net_device *ndev, 821 __be16 proto, u16 vid) 822 { 823 struct prueth_emac *emac = netdev_priv(ndev); 824 struct prueth *prueth = emac->prueth; 825 int untag_mask = 0; 826 int port_mask; 827 828 if (prueth->is_hsr_offload_mode) { 829 port_mask = BIT(PRUETH_PORT_HOST) | BIT(emac->port_id); 830 untag_mask = 0; 831 832 netdev_dbg(emac->ndev, "VID add vid:%u port_mask:%X untag_mask %X\n", 833 vid, port_mask, untag_mask); 834 835 icssg_vtbl_modify(emac, vid, port_mask, untag_mask, true); 836 icssg_set_pvid(emac->prueth, vid, emac->port_id); 837 } 838 return 0; 839 } 840 841 static int emac_ndo_vlan_rx_del_vid(struct net_device *ndev, 842 __be16 proto, u16 vid) 843 { 844 struct prueth_emac *emac = netdev_priv(ndev); 845 struct prueth *prueth = emac->prueth; 846 int untag_mask = 0; 847 int port_mask; 848 849 if (prueth->is_hsr_offload_mode) { 850 port_mask = BIT(PRUETH_PORT_HOST); 851 untag_mask = 0; 852 853 netdev_dbg(emac->ndev, "VID del vid:%u port_mask:%X untag_mask %X\n", 854 vid, port_mask, untag_mask); 855 856 icssg_vtbl_modify(emac, vid, port_mask, untag_mask, false); 857 } 858 return 0; 859 } 860 861 static const struct net_device_ops emac_netdev_ops = { 862 .ndo_open = emac_ndo_open, 863 .ndo_stop = emac_ndo_stop, 864 .ndo_start_xmit = icssg_ndo_start_xmit, 865 .ndo_set_mac_address = eth_mac_addr, 866 .ndo_validate_addr = eth_validate_addr, 867 .ndo_tx_timeout = icssg_ndo_tx_timeout, 868 .ndo_set_rx_mode = emac_ndo_set_rx_mode, 869 .ndo_eth_ioctl = icssg_ndo_ioctl, 870 .ndo_get_stats64 = icssg_ndo_get_stats64, 871 .ndo_get_phys_port_name = icssg_ndo_get_phys_port_name, 872 .ndo_fix_features = emac_ndo_fix_features, 873 .ndo_vlan_rx_add_vid = emac_ndo_vlan_rx_add_vid, 874 .ndo_vlan_rx_kill_vid = emac_ndo_vlan_rx_del_vid, 875 }; 876 877 static int prueth_netdev_init(struct prueth *prueth, 878 struct device_node *eth_node) 879 { 880 int ret, num_tx_chn = PRUETH_MAX_TX_QUEUES; 881 struct prueth_emac *emac; 882 struct net_device *ndev; 883 enum prueth_port port; 884 const char *irq_name; 885 enum prueth_mac mac; 886 887 port = prueth_node_port(eth_node); 888 if (port == PRUETH_PORT_INVALID) 889 return -EINVAL; 890 891 mac = prueth_node_mac(eth_node); 892 if (mac == PRUETH_MAC_INVALID) 893 return -EINVAL; 894 895 ndev = alloc_etherdev_mq(sizeof(*emac), num_tx_chn); 896 if (!ndev) 897 return -ENOMEM; 898 899 emac = netdev_priv(ndev); 900 emac->prueth = prueth; 901 emac->ndev = ndev; 902 emac->port_id = port; 903 emac->cmd_wq = create_singlethread_workqueue("icssg_cmd_wq"); 904 if (!emac->cmd_wq) { 905 ret = -ENOMEM; 906 goto free_ndev; 907 } 908 INIT_WORK(&emac->rx_mode_work, emac_ndo_set_rx_mode_work); 909 910 INIT_DELAYED_WORK(&emac->stats_work, icssg_stats_work_handler); 911 912 ret = pruss_request_mem_region(prueth->pruss, 913 port == PRUETH_PORT_MII0 ? 914 PRUSS_MEM_DRAM0 : PRUSS_MEM_DRAM1, 915 &emac->dram); 916 if (ret) { 917 dev_err(prueth->dev, "unable to get DRAM: %d\n", ret); 918 ret = -ENOMEM; 919 goto free_wq; 920 } 921 922 emac->tx_ch_num = 1; 923 924 irq_name = "tx_ts0"; 925 if (emac->port_id == PRUETH_PORT_MII1) 926 irq_name = "tx_ts1"; 927 emac->tx_ts_irq = platform_get_irq_byname_optional(prueth->pdev, irq_name); 928 if (emac->tx_ts_irq < 0) { 929 ret = dev_err_probe(prueth->dev, emac->tx_ts_irq, "could not get tx_ts_irq\n"); 930 goto free; 931 } 932 933 SET_NETDEV_DEV(ndev, prueth->dev); 934 spin_lock_init(&emac->lock); 935 mutex_init(&emac->cmd_lock); 936 937 emac->phy_node = of_parse_phandle(eth_node, "phy-handle", 0); 938 if (!emac->phy_node && !of_phy_is_fixed_link(eth_node)) { 939 dev_err(prueth->dev, "couldn't find phy-handle\n"); 940 ret = -ENODEV; 941 goto free; 942 } else if (of_phy_is_fixed_link(eth_node)) { 943 ret = of_phy_register_fixed_link(eth_node); 944 if (ret) { 945 ret = dev_err_probe(prueth->dev, ret, 946 "failed to register fixed-link phy\n"); 947 goto free; 948 } 949 950 emac->phy_node = eth_node; 951 } 952 953 ret = of_get_phy_mode(eth_node, &emac->phy_if); 954 if (ret) { 955 dev_err(prueth->dev, "could not get phy-mode property\n"); 956 goto free; 957 } 958 959 if (emac->phy_if != PHY_INTERFACE_MODE_MII && 960 !phy_interface_mode_is_rgmii(emac->phy_if)) { 961 dev_err(prueth->dev, "PHY mode unsupported %s\n", phy_modes(emac->phy_if)); 962 ret = -EINVAL; 963 goto free; 964 } 965 966 /* AM65 SR2.0 has TX Internal delay always enabled by hardware 967 * and it is not possible to disable TX Internal delay. The below 968 * switch case block describes how we handle different phy modes 969 * based on hardware restriction. 970 */ 971 switch (emac->phy_if) { 972 case PHY_INTERFACE_MODE_RGMII_ID: 973 emac->phy_if = PHY_INTERFACE_MODE_RGMII_RXID; 974 break; 975 case PHY_INTERFACE_MODE_RGMII_TXID: 976 emac->phy_if = PHY_INTERFACE_MODE_RGMII; 977 break; 978 case PHY_INTERFACE_MODE_RGMII: 979 case PHY_INTERFACE_MODE_RGMII_RXID: 980 dev_err(prueth->dev, "RGMII mode without TX delay is not supported"); 981 ret = -EINVAL; 982 goto free; 983 default: 984 break; 985 } 986 987 /* get mac address from DT and set private and netdev addr */ 988 ret = of_get_ethdev_address(eth_node, ndev); 989 if (!is_valid_ether_addr(ndev->dev_addr)) { 990 eth_hw_addr_random(ndev); 991 dev_warn(prueth->dev, "port %d: using random MAC addr: %pM\n", 992 port, ndev->dev_addr); 993 } 994 ether_addr_copy(emac->mac_addr, ndev->dev_addr); 995 996 ndev->dev.of_node = eth_node; 997 ndev->min_mtu = PRUETH_MIN_PKT_SIZE; 998 ndev->max_mtu = PRUETH_MAX_MTU; 999 ndev->netdev_ops = &emac_netdev_ops; 1000 ndev->ethtool_ops = &icssg_ethtool_ops; 1001 ndev->hw_features = NETIF_F_SG; 1002 ndev->features = ndev->hw_features | NETIF_F_HW_VLAN_CTAG_FILTER; 1003 ndev->hw_features |= NETIF_PRUETH_HSR_OFFLOAD_FEATURES; 1004 1005 netif_napi_add(ndev, &emac->napi_rx, icssg_napi_rx_poll); 1006 hrtimer_init(&emac->rx_hrtimer, CLOCK_MONOTONIC, 1007 HRTIMER_MODE_REL_PINNED); 1008 emac->rx_hrtimer.function = &emac_rx_timer_callback; 1009 prueth->emac[mac] = emac; 1010 1011 return 0; 1012 1013 free: 1014 pruss_release_mem_region(prueth->pruss, &emac->dram); 1015 free_wq: 1016 destroy_workqueue(emac->cmd_wq); 1017 free_ndev: 1018 emac->ndev = NULL; 1019 prueth->emac[mac] = NULL; 1020 free_netdev(ndev); 1021 1022 return ret; 1023 } 1024 1025 bool prueth_dev_check(const struct net_device *ndev) 1026 { 1027 if (ndev->netdev_ops == &emac_netdev_ops && netif_running(ndev)) { 1028 struct prueth_emac *emac = netdev_priv(ndev); 1029 1030 return emac->prueth->is_switch_mode; 1031 } 1032 1033 return false; 1034 } 1035 1036 static void prueth_offload_fwd_mark_update(struct prueth *prueth) 1037 { 1038 int set_val = 0; 1039 int i; 1040 1041 if (prueth->br_members == (BIT(PRUETH_PORT_MII0) | BIT(PRUETH_PORT_MII1))) 1042 set_val = 1; 1043 1044 dev_dbg(prueth->dev, "set offload_fwd_mark %d\n", set_val); 1045 1046 for (i = PRUETH_MAC0; i < PRUETH_NUM_MACS; i++) { 1047 struct prueth_emac *emac = prueth->emac[i]; 1048 1049 if (!emac || !emac->ndev) 1050 continue; 1051 1052 emac->offload_fwd_mark = set_val; 1053 } 1054 } 1055 1056 static void prueth_emac_restart(struct prueth *prueth) 1057 { 1058 struct prueth_emac *emac0 = prueth->emac[PRUETH_MAC0]; 1059 struct prueth_emac *emac1 = prueth->emac[PRUETH_MAC1]; 1060 1061 /* Detach the net_device for both PRUeth ports*/ 1062 if (netif_running(emac0->ndev)) 1063 netif_device_detach(emac0->ndev); 1064 if (netif_running(emac1->ndev)) 1065 netif_device_detach(emac1->ndev); 1066 1067 /* Disable both PRUeth ports */ 1068 icssg_set_port_state(emac0, ICSSG_EMAC_PORT_DISABLE); 1069 icssg_set_port_state(emac1, ICSSG_EMAC_PORT_DISABLE); 1070 1071 /* Stop both pru cores for both PRUeth ports*/ 1072 prueth_emac_stop(emac0); 1073 prueth->emacs_initialized--; 1074 prueth_emac_stop(emac1); 1075 prueth->emacs_initialized--; 1076 1077 /* Start both pru cores for both PRUeth ports */ 1078 prueth_emac_start(prueth, emac0); 1079 prueth->emacs_initialized++; 1080 prueth_emac_start(prueth, emac1); 1081 prueth->emacs_initialized++; 1082 1083 /* Enable forwarding for both PRUeth ports */ 1084 icssg_set_port_state(emac0, ICSSG_EMAC_PORT_FORWARD); 1085 icssg_set_port_state(emac1, ICSSG_EMAC_PORT_FORWARD); 1086 1087 /* Attache net_device for both PRUeth ports */ 1088 netif_device_attach(emac0->ndev); 1089 netif_device_attach(emac1->ndev); 1090 } 1091 1092 static void icssg_change_mode(struct prueth *prueth) 1093 { 1094 struct prueth_emac *emac; 1095 int mac; 1096 1097 prueth_emac_restart(prueth); 1098 1099 for (mac = PRUETH_MAC0; mac < PRUETH_NUM_MACS; mac++) { 1100 emac = prueth->emac[mac]; 1101 if (prueth->is_hsr_offload_mode) { 1102 if (emac->ndev->features & NETIF_F_HW_HSR_TAG_RM) 1103 icssg_set_port_state(emac, ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE); 1104 else 1105 icssg_set_port_state(emac, ICSSG_EMAC_HSR_RX_OFFLOAD_DISABLE); 1106 } 1107 1108 if (netif_running(emac->ndev)) { 1109 icssg_fdb_add_del(emac, eth_stp_addr, prueth->default_vlan, 1110 ICSSG_FDB_ENTRY_P0_MEMBERSHIP | 1111 ICSSG_FDB_ENTRY_P1_MEMBERSHIP | 1112 ICSSG_FDB_ENTRY_P2_MEMBERSHIP | 1113 ICSSG_FDB_ENTRY_BLOCK, 1114 true); 1115 icssg_vtbl_modify(emac, emac->port_vlan | DEFAULT_VID, 1116 BIT(emac->port_id) | DEFAULT_PORT_MASK, 1117 BIT(emac->port_id) | DEFAULT_UNTAG_MASK, 1118 true); 1119 if (prueth->is_hsr_offload_mode) 1120 icssg_vtbl_modify(emac, DEFAULT_VID, 1121 DEFAULT_PORT_MASK, 1122 DEFAULT_UNTAG_MASK, true); 1123 icssg_set_pvid(prueth, emac->port_vlan, emac->port_id); 1124 if (prueth->is_switch_mode) 1125 icssg_set_port_state(emac, ICSSG_EMAC_PORT_VLAN_AWARE_ENABLE); 1126 } 1127 } 1128 } 1129 1130 static int prueth_netdevice_port_link(struct net_device *ndev, 1131 struct net_device *br_ndev, 1132 struct netlink_ext_ack *extack) 1133 { 1134 struct prueth_emac *emac = netdev_priv(ndev); 1135 struct prueth *prueth = emac->prueth; 1136 int err; 1137 1138 if (!prueth->br_members) { 1139 prueth->hw_bridge_dev = br_ndev; 1140 } else { 1141 /* This is adding the port to a second bridge, this is 1142 * unsupported 1143 */ 1144 if (prueth->hw_bridge_dev != br_ndev) 1145 return -EOPNOTSUPP; 1146 } 1147 1148 err = switchdev_bridge_port_offload(br_ndev, ndev, emac, 1149 &prueth->prueth_switchdev_nb, 1150 &prueth->prueth_switchdev_bl_nb, 1151 false, extack); 1152 if (err) 1153 return err; 1154 1155 prueth->br_members |= BIT(emac->port_id); 1156 1157 if (!prueth->is_switch_mode) { 1158 if (prueth->br_members & BIT(PRUETH_PORT_MII0) && 1159 prueth->br_members & BIT(PRUETH_PORT_MII1)) { 1160 prueth->is_switch_mode = true; 1161 prueth->default_vlan = 1; 1162 emac->port_vlan = prueth->default_vlan; 1163 icssg_change_mode(prueth); 1164 } 1165 } 1166 1167 prueth_offload_fwd_mark_update(prueth); 1168 1169 return NOTIFY_DONE; 1170 } 1171 1172 static void prueth_netdevice_port_unlink(struct net_device *ndev) 1173 { 1174 struct prueth_emac *emac = netdev_priv(ndev); 1175 struct prueth *prueth = emac->prueth; 1176 1177 prueth->br_members &= ~BIT(emac->port_id); 1178 1179 if (prueth->is_switch_mode) { 1180 prueth->is_switch_mode = false; 1181 emac->port_vlan = 0; 1182 prueth_emac_restart(prueth); 1183 } 1184 1185 prueth_offload_fwd_mark_update(prueth); 1186 1187 if (!prueth->br_members) 1188 prueth->hw_bridge_dev = NULL; 1189 } 1190 1191 static int prueth_hsr_port_link(struct net_device *ndev) 1192 { 1193 struct prueth_emac *emac = netdev_priv(ndev); 1194 struct prueth *prueth = emac->prueth; 1195 struct prueth_emac *emac0; 1196 struct prueth_emac *emac1; 1197 1198 emac0 = prueth->emac[PRUETH_MAC0]; 1199 emac1 = prueth->emac[PRUETH_MAC1]; 1200 1201 if (prueth->is_switch_mode) 1202 return -EOPNOTSUPP; 1203 1204 prueth->hsr_members |= BIT(emac->port_id); 1205 if (!prueth->is_hsr_offload_mode) { 1206 if (prueth->hsr_members & BIT(PRUETH_PORT_MII0) && 1207 prueth->hsr_members & BIT(PRUETH_PORT_MII1)) { 1208 if (!(emac0->ndev->features & 1209 NETIF_PRUETH_HSR_OFFLOAD_FEATURES) && 1210 !(emac1->ndev->features & 1211 NETIF_PRUETH_HSR_OFFLOAD_FEATURES)) 1212 return -EOPNOTSUPP; 1213 prueth->is_hsr_offload_mode = true; 1214 prueth->default_vlan = 1; 1215 emac0->port_vlan = prueth->default_vlan; 1216 emac1->port_vlan = prueth->default_vlan; 1217 icssg_change_mode(prueth); 1218 netdev_dbg(ndev, "Enabling HSR offload mode\n"); 1219 } 1220 } 1221 1222 return 0; 1223 } 1224 1225 static void prueth_hsr_port_unlink(struct net_device *ndev) 1226 { 1227 struct prueth_emac *emac = netdev_priv(ndev); 1228 struct prueth *prueth = emac->prueth; 1229 struct prueth_emac *emac0; 1230 struct prueth_emac *emac1; 1231 1232 emac0 = prueth->emac[PRUETH_MAC0]; 1233 emac1 = prueth->emac[PRUETH_MAC1]; 1234 1235 prueth->hsr_members &= ~BIT(emac->port_id); 1236 if (prueth->is_hsr_offload_mode) { 1237 prueth->is_hsr_offload_mode = false; 1238 emac0->port_vlan = 0; 1239 emac1->port_vlan = 0; 1240 prueth->hsr_dev = NULL; 1241 prueth_emac_restart(prueth); 1242 netdev_dbg(ndev, "Disabling HSR Offload mode\n"); 1243 } 1244 } 1245 1246 /* netdev notifier */ 1247 static int prueth_netdevice_event(struct notifier_block *unused, 1248 unsigned long event, void *ptr) 1249 { 1250 struct netlink_ext_ack *extack = netdev_notifier_info_to_extack(ptr); 1251 struct net_device *ndev = netdev_notifier_info_to_dev(ptr); 1252 struct netdev_notifier_changeupper_info *info; 1253 struct prueth_emac *emac = netdev_priv(ndev); 1254 struct prueth *prueth = emac->prueth; 1255 int ret = NOTIFY_DONE; 1256 1257 if (ndev->netdev_ops != &emac_netdev_ops) 1258 return NOTIFY_DONE; 1259 1260 switch (event) { 1261 case NETDEV_CHANGEUPPER: 1262 info = ptr; 1263 1264 if ((ndev->features & NETIF_PRUETH_HSR_OFFLOAD_FEATURES) && 1265 is_hsr_master(info->upper_dev)) { 1266 if (info->linking) { 1267 if (!prueth->hsr_dev) { 1268 prueth->hsr_dev = info->upper_dev; 1269 icssg_class_set_host_mac_addr(prueth->miig_rt, 1270 prueth->hsr_dev->dev_addr); 1271 } else { 1272 if (prueth->hsr_dev != info->upper_dev) { 1273 netdev_dbg(ndev, "Both interfaces must be linked to same upper device\n"); 1274 return -EOPNOTSUPP; 1275 } 1276 } 1277 prueth_hsr_port_link(ndev); 1278 } else { 1279 prueth_hsr_port_unlink(ndev); 1280 } 1281 } 1282 1283 if (netif_is_bridge_master(info->upper_dev)) { 1284 if (info->linking) 1285 ret = prueth_netdevice_port_link(ndev, info->upper_dev, extack); 1286 else 1287 prueth_netdevice_port_unlink(ndev); 1288 } 1289 break; 1290 default: 1291 return NOTIFY_DONE; 1292 } 1293 1294 return notifier_from_errno(ret); 1295 } 1296 1297 static int prueth_register_notifiers(struct prueth *prueth) 1298 { 1299 int ret = 0; 1300 1301 prueth->prueth_netdevice_nb.notifier_call = &prueth_netdevice_event; 1302 ret = register_netdevice_notifier(&prueth->prueth_netdevice_nb); 1303 if (ret) { 1304 dev_err(prueth->dev, "can't register netdevice notifier\n"); 1305 return ret; 1306 } 1307 1308 ret = prueth_switchdev_register_notifiers(prueth); 1309 if (ret) 1310 unregister_netdevice_notifier(&prueth->prueth_netdevice_nb); 1311 1312 return ret; 1313 } 1314 1315 static void prueth_unregister_notifiers(struct prueth *prueth) 1316 { 1317 prueth_switchdev_unregister_notifiers(prueth); 1318 unregister_netdevice_notifier(&prueth->prueth_netdevice_nb); 1319 } 1320 1321 static int prueth_probe(struct platform_device *pdev) 1322 { 1323 struct device_node *eth_node, *eth_ports_node; 1324 struct device_node *eth0_node = NULL; 1325 struct device_node *eth1_node = NULL; 1326 struct genpool_data_align gp_data = { 1327 .align = SZ_64K, 1328 }; 1329 struct device *dev = &pdev->dev; 1330 struct device_node *np; 1331 struct prueth *prueth; 1332 struct pruss *pruss; 1333 u32 msmc_ram_size; 1334 int i, ret; 1335 1336 np = dev->of_node; 1337 1338 prueth = devm_kzalloc(dev, sizeof(*prueth), GFP_KERNEL); 1339 if (!prueth) 1340 return -ENOMEM; 1341 1342 dev_set_drvdata(dev, prueth); 1343 prueth->pdev = pdev; 1344 prueth->pdata = *(const struct prueth_pdata *)device_get_match_data(dev); 1345 1346 prueth->dev = dev; 1347 eth_ports_node = of_get_child_by_name(np, "ethernet-ports"); 1348 if (!eth_ports_node) 1349 return -ENOENT; 1350 1351 for_each_child_of_node(eth_ports_node, eth_node) { 1352 u32 reg; 1353 1354 if (strcmp(eth_node->name, "port")) 1355 continue; 1356 ret = of_property_read_u32(eth_node, "reg", ®); 1357 if (ret < 0) { 1358 dev_err(dev, "%pOF error reading port_id %d\n", 1359 eth_node, ret); 1360 } 1361 1362 of_node_get(eth_node); 1363 1364 if (reg == 0) { 1365 eth0_node = eth_node; 1366 if (!of_device_is_available(eth0_node)) { 1367 of_node_put(eth0_node); 1368 eth0_node = NULL; 1369 } 1370 } else if (reg == 1) { 1371 eth1_node = eth_node; 1372 if (!of_device_is_available(eth1_node)) { 1373 of_node_put(eth1_node); 1374 eth1_node = NULL; 1375 } 1376 } else { 1377 dev_err(dev, "port reg should be 0 or 1\n"); 1378 } 1379 } 1380 1381 of_node_put(eth_ports_node); 1382 1383 /* At least one node must be present and available else we fail */ 1384 if (!eth0_node && !eth1_node) { 1385 dev_err(dev, "neither port0 nor port1 node available\n"); 1386 return -ENODEV; 1387 } 1388 1389 if (eth0_node == eth1_node) { 1390 dev_err(dev, "port0 and port1 can't have same reg\n"); 1391 of_node_put(eth0_node); 1392 return -ENODEV; 1393 } 1394 1395 prueth->eth_node[PRUETH_MAC0] = eth0_node; 1396 prueth->eth_node[PRUETH_MAC1] = eth1_node; 1397 1398 prueth->miig_rt = syscon_regmap_lookup_by_phandle(np, "ti,mii-g-rt"); 1399 if (IS_ERR(prueth->miig_rt)) { 1400 dev_err(dev, "couldn't get ti,mii-g-rt syscon regmap\n"); 1401 return -ENODEV; 1402 } 1403 1404 prueth->mii_rt = syscon_regmap_lookup_by_phandle(np, "ti,mii-rt"); 1405 if (IS_ERR(prueth->mii_rt)) { 1406 dev_err(dev, "couldn't get ti,mii-rt syscon regmap\n"); 1407 return -ENODEV; 1408 } 1409 1410 prueth->pa_stats = syscon_regmap_lookup_by_phandle(np, "ti,pa-stats"); 1411 if (IS_ERR(prueth->pa_stats)) { 1412 dev_err(dev, "couldn't get ti,pa-stats syscon regmap\n"); 1413 prueth->pa_stats = NULL; 1414 } 1415 1416 if (eth0_node) { 1417 ret = prueth_get_cores(prueth, ICSS_SLICE0, false); 1418 if (ret) 1419 goto put_cores; 1420 } 1421 1422 if (eth1_node) { 1423 ret = prueth_get_cores(prueth, ICSS_SLICE1, false); 1424 if (ret) 1425 goto put_cores; 1426 } 1427 1428 pruss = pruss_get(eth0_node ? 1429 prueth->pru[ICSS_SLICE0] : prueth->pru[ICSS_SLICE1]); 1430 if (IS_ERR(pruss)) { 1431 ret = PTR_ERR(pruss); 1432 dev_err(dev, "unable to get pruss handle\n"); 1433 goto put_cores; 1434 } 1435 1436 prueth->pruss = pruss; 1437 1438 ret = pruss_request_mem_region(pruss, PRUSS_MEM_SHRD_RAM2, 1439 &prueth->shram); 1440 if (ret) { 1441 dev_err(dev, "unable to get PRUSS SHRD RAM2: %d\n", ret); 1442 goto put_pruss; 1443 } 1444 1445 prueth->sram_pool = of_gen_pool_get(np, "sram", 0); 1446 if (!prueth->sram_pool) { 1447 dev_err(dev, "unable to get SRAM pool\n"); 1448 ret = -ENODEV; 1449 1450 goto put_mem; 1451 } 1452 1453 msmc_ram_size = MSMC_RAM_SIZE; 1454 prueth->is_switchmode_supported = prueth->pdata.switch_mode; 1455 if (prueth->is_switchmode_supported) 1456 msmc_ram_size = MSMC_RAM_SIZE_SWITCH_MODE; 1457 1458 /* NOTE: FW bug needs buffer base to be 64KB aligned */ 1459 prueth->msmcram.va = 1460 (void __iomem *)gen_pool_alloc_algo(prueth->sram_pool, 1461 msmc_ram_size, 1462 gen_pool_first_fit_align, 1463 &gp_data); 1464 1465 if (!prueth->msmcram.va) { 1466 ret = -ENOMEM; 1467 dev_err(dev, "unable to allocate MSMC resource\n"); 1468 goto put_mem; 1469 } 1470 prueth->msmcram.pa = gen_pool_virt_to_phys(prueth->sram_pool, 1471 (unsigned long)prueth->msmcram.va); 1472 prueth->msmcram.size = msmc_ram_size; 1473 memset_io(prueth->msmcram.va, 0, msmc_ram_size); 1474 dev_dbg(dev, "sram: pa %llx va %p size %zx\n", prueth->msmcram.pa, 1475 prueth->msmcram.va, prueth->msmcram.size); 1476 1477 prueth->iep0 = icss_iep_get_idx(np, 0); 1478 if (IS_ERR(prueth->iep0)) { 1479 ret = dev_err_probe(dev, PTR_ERR(prueth->iep0), "iep0 get failed\n"); 1480 prueth->iep0 = NULL; 1481 goto free_pool; 1482 } 1483 1484 prueth->iep1 = icss_iep_get_idx(np, 1); 1485 if (IS_ERR(prueth->iep1)) { 1486 ret = dev_err_probe(dev, PTR_ERR(prueth->iep1), "iep1 get failed\n"); 1487 goto put_iep0; 1488 } 1489 1490 if (prueth->pdata.quirk_10m_link_issue) { 1491 /* Enable IEP1 for FW in 64bit mode as W/A for 10M FD link detect issue under TX 1492 * traffic. 1493 */ 1494 icss_iep_init_fw(prueth->iep1); 1495 } 1496 1497 spin_lock_init(&prueth->vtbl_lock); 1498 /* setup netdev interfaces */ 1499 if (eth0_node) { 1500 ret = prueth_netdev_init(prueth, eth0_node); 1501 if (ret) { 1502 dev_err_probe(dev, ret, "netdev init %s failed\n", 1503 eth0_node->name); 1504 goto exit_iep; 1505 } 1506 1507 prueth->emac[PRUETH_MAC0]->half_duplex = 1508 of_property_read_bool(eth0_node, "ti,half-duplex-capable"); 1509 1510 prueth->emac[PRUETH_MAC0]->iep = prueth->iep0; 1511 } 1512 1513 if (eth1_node) { 1514 ret = prueth_netdev_init(prueth, eth1_node); 1515 if (ret) { 1516 dev_err_probe(dev, ret, "netdev init %s failed\n", 1517 eth1_node->name); 1518 goto netdev_exit; 1519 } 1520 1521 prueth->emac[PRUETH_MAC1]->half_duplex = 1522 of_property_read_bool(eth1_node, "ti,half-duplex-capable"); 1523 1524 prueth->emac[PRUETH_MAC1]->iep = prueth->iep0; 1525 } 1526 1527 /* register the network devices */ 1528 if (eth0_node) { 1529 ret = register_netdev(prueth->emac[PRUETH_MAC0]->ndev); 1530 if (ret) { 1531 dev_err(dev, "can't register netdev for port MII0"); 1532 goto netdev_exit; 1533 } 1534 1535 prueth->registered_netdevs[PRUETH_MAC0] = prueth->emac[PRUETH_MAC0]->ndev; 1536 1537 ret = emac_phy_connect(prueth->emac[PRUETH_MAC0]); 1538 if (ret) { 1539 dev_err(dev, 1540 "can't connect to MII0 PHY, error -%d", ret); 1541 goto netdev_unregister; 1542 } 1543 phy_attached_info(prueth->emac[PRUETH_MAC0]->ndev->phydev); 1544 } 1545 1546 if (eth1_node) { 1547 ret = register_netdev(prueth->emac[PRUETH_MAC1]->ndev); 1548 if (ret) { 1549 dev_err(dev, "can't register netdev for port MII1"); 1550 goto netdev_unregister; 1551 } 1552 1553 prueth->registered_netdevs[PRUETH_MAC1] = prueth->emac[PRUETH_MAC1]->ndev; 1554 ret = emac_phy_connect(prueth->emac[PRUETH_MAC1]); 1555 if (ret) { 1556 dev_err(dev, 1557 "can't connect to MII1 PHY, error %d", ret); 1558 goto netdev_unregister; 1559 } 1560 phy_attached_info(prueth->emac[PRUETH_MAC1]->ndev->phydev); 1561 } 1562 1563 if (prueth->is_switchmode_supported) { 1564 ret = prueth_register_notifiers(prueth); 1565 if (ret) 1566 goto netdev_unregister; 1567 1568 sprintf(prueth->switch_id, "%s", dev_name(dev)); 1569 } 1570 1571 dev_info(dev, "TI PRU ethernet driver initialized: %s EMAC mode\n", 1572 (!eth0_node || !eth1_node) ? "single" : "dual"); 1573 1574 if (eth1_node) 1575 of_node_put(eth1_node); 1576 if (eth0_node) 1577 of_node_put(eth0_node); 1578 return 0; 1579 1580 netdev_unregister: 1581 for (i = 0; i < PRUETH_NUM_MACS; i++) { 1582 if (!prueth->registered_netdevs[i]) 1583 continue; 1584 if (prueth->emac[i]->ndev->phydev) { 1585 phy_disconnect(prueth->emac[i]->ndev->phydev); 1586 prueth->emac[i]->ndev->phydev = NULL; 1587 } 1588 unregister_netdev(prueth->registered_netdevs[i]); 1589 } 1590 1591 netdev_exit: 1592 for (i = 0; i < PRUETH_NUM_MACS; i++) { 1593 eth_node = prueth->eth_node[i]; 1594 if (!eth_node) 1595 continue; 1596 1597 prueth_netdev_exit(prueth, eth_node); 1598 } 1599 1600 exit_iep: 1601 if (prueth->pdata.quirk_10m_link_issue) 1602 icss_iep_exit_fw(prueth->iep1); 1603 icss_iep_put(prueth->iep1); 1604 1605 put_iep0: 1606 icss_iep_put(prueth->iep0); 1607 prueth->iep0 = NULL; 1608 prueth->iep1 = NULL; 1609 1610 free_pool: 1611 gen_pool_free(prueth->sram_pool, 1612 (unsigned long)prueth->msmcram.va, msmc_ram_size); 1613 1614 put_mem: 1615 pruss_release_mem_region(prueth->pruss, &prueth->shram); 1616 1617 put_pruss: 1618 pruss_put(prueth->pruss); 1619 1620 put_cores: 1621 if (eth1_node) { 1622 prueth_put_cores(prueth, ICSS_SLICE1); 1623 of_node_put(eth1_node); 1624 } 1625 1626 if (eth0_node) { 1627 prueth_put_cores(prueth, ICSS_SLICE0); 1628 of_node_put(eth0_node); 1629 } 1630 1631 return ret; 1632 } 1633 1634 static void prueth_remove(struct platform_device *pdev) 1635 { 1636 struct prueth *prueth = platform_get_drvdata(pdev); 1637 struct device_node *eth_node; 1638 int i; 1639 1640 prueth_unregister_notifiers(prueth); 1641 1642 for (i = 0; i < PRUETH_NUM_MACS; i++) { 1643 if (!prueth->registered_netdevs[i]) 1644 continue; 1645 phy_stop(prueth->emac[i]->ndev->phydev); 1646 phy_disconnect(prueth->emac[i]->ndev->phydev); 1647 prueth->emac[i]->ndev->phydev = NULL; 1648 unregister_netdev(prueth->registered_netdevs[i]); 1649 } 1650 1651 for (i = 0; i < PRUETH_NUM_MACS; i++) { 1652 eth_node = prueth->eth_node[i]; 1653 if (!eth_node) 1654 continue; 1655 1656 prueth_netdev_exit(prueth, eth_node); 1657 } 1658 1659 if (prueth->pdata.quirk_10m_link_issue) 1660 icss_iep_exit_fw(prueth->iep1); 1661 1662 icss_iep_put(prueth->iep1); 1663 icss_iep_put(prueth->iep0); 1664 1665 gen_pool_free(prueth->sram_pool, 1666 (unsigned long)prueth->msmcram.va, 1667 MSMC_RAM_SIZE); 1668 1669 pruss_release_mem_region(prueth->pruss, &prueth->shram); 1670 1671 pruss_put(prueth->pruss); 1672 1673 if (prueth->eth_node[PRUETH_MAC1]) 1674 prueth_put_cores(prueth, ICSS_SLICE1); 1675 1676 if (prueth->eth_node[PRUETH_MAC0]) 1677 prueth_put_cores(prueth, ICSS_SLICE0); 1678 } 1679 1680 static const struct prueth_pdata am654_icssg_pdata = { 1681 .fdqring_mode = K3_RINGACC_RING_MODE_MESSAGE, 1682 .quirk_10m_link_issue = 1, 1683 .switch_mode = 1, 1684 }; 1685 1686 static const struct prueth_pdata am64x_icssg_pdata = { 1687 .fdqring_mode = K3_RINGACC_RING_MODE_RING, 1688 .quirk_10m_link_issue = 1, 1689 .switch_mode = 1, 1690 }; 1691 1692 static const struct of_device_id prueth_dt_match[] = { 1693 { .compatible = "ti,am654-icssg-prueth", .data = &am654_icssg_pdata }, 1694 { .compatible = "ti,am642-icssg-prueth", .data = &am64x_icssg_pdata }, 1695 { /* sentinel */ } 1696 }; 1697 MODULE_DEVICE_TABLE(of, prueth_dt_match); 1698 1699 static struct platform_driver prueth_driver = { 1700 .probe = prueth_probe, 1701 .remove = prueth_remove, 1702 .driver = { 1703 .name = "icssg-prueth", 1704 .of_match_table = prueth_dt_match, 1705 .pm = &prueth_dev_pm_ops, 1706 }, 1707 }; 1708 module_platform_driver(prueth_driver); 1709 1710 MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>"); 1711 MODULE_AUTHOR("Md Danish Anwar <danishanwar@ti.com>"); 1712 MODULE_DESCRIPTION("PRUSS ICSSG Ethernet Driver"); 1713 MODULE_LICENSE("GPL"); 1714