xref: /linux/drivers/net/ethernet/ti/davinci_mdio.c (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732)
1 /*
2  * DaVinci MDIO Module driver
3  *
4  * Copyright (C) 2010 Texas Instruments.
5  *
6  * Shamelessly ripped out of davinci_emac.c, original copyrights follow:
7  *
8  * Copyright (C) 2009 Texas Instruments.
9  *
10  * ---------------------------------------------------------------------------
11  *
12  * This program is free software; you can redistribute it and/or modify
13  * it under the terms of the GNU General Public License as published by
14  * the Free Software Foundation; either version 2 of the License, or
15  * (at your option) any later version.
16  *
17  * This program is distributed in the hope that it will be useful,
18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
20  * GNU General Public License for more details.
21  *
22  * You should have received a copy of the GNU General Public License
23  * along with this program; if not, write to the Free Software
24  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25  * ---------------------------------------------------------------------------
26  */
27 #include <linux/module.h>
28 #include <linux/kernel.h>
29 #include <linux/platform_device.h>
30 #include <linux/delay.h>
31 #include <linux/sched.h>
32 #include <linux/slab.h>
33 #include <linux/phy.h>
34 #include <linux/clk.h>
35 #include <linux/err.h>
36 #include <linux/io.h>
37 #include <linux/pm_runtime.h>
38 #include <linux/davinci_emac.h>
39 #include <linux/of.h>
40 #include <linux/of_device.h>
41 #include <linux/of_mdio.h>
42 #include <linux/pinctrl/consumer.h>
43 
44 /*
45  * This timeout definition is a worst-case ultra defensive measure against
46  * unexpected controller lock ups.  Ideally, we should never ever hit this
47  * scenario in practice.
48  */
49 #define MDIO_TIMEOUT		100 /* msecs */
50 
51 #define PHY_REG_MASK		0x1f
52 #define PHY_ID_MASK		0x1f
53 
54 #define DEF_OUT_FREQ		2200000		/* 2.2 MHz */
55 
56 struct davinci_mdio_regs {
57 	u32	version;
58 	u32	control;
59 #define CONTROL_IDLE		BIT(31)
60 #define CONTROL_ENABLE		BIT(30)
61 #define CONTROL_MAX_DIV		(0xffff)
62 
63 	u32	alive;
64 	u32	link;
65 	u32	linkintraw;
66 	u32	linkintmasked;
67 	u32	__reserved_0[2];
68 	u32	userintraw;
69 	u32	userintmasked;
70 	u32	userintmaskset;
71 	u32	userintmaskclr;
72 	u32	__reserved_1[20];
73 
74 	struct {
75 		u32	access;
76 #define USERACCESS_GO		BIT(31)
77 #define USERACCESS_WRITE	BIT(30)
78 #define USERACCESS_ACK		BIT(29)
79 #define USERACCESS_READ		(0)
80 #define USERACCESS_DATA		(0xffff)
81 
82 		u32	physel;
83 	}	user[0];
84 };
85 
86 static const struct mdio_platform_data default_pdata = {
87 	.bus_freq = DEF_OUT_FREQ,
88 };
89 
90 struct davinci_mdio_data {
91 	struct mdio_platform_data pdata;
92 	struct davinci_mdio_regs __iomem *regs;
93 	spinlock_t	lock;
94 	struct clk	*clk;
95 	struct device	*dev;
96 	struct mii_bus	*bus;
97 	bool		suspended;
98 	unsigned long	access_time; /* jiffies */
99 	/* Indicates that driver shouldn't modify phy_mask in case
100 	 * if MDIO bus is registered from DT.
101 	 */
102 	bool		skip_scan;
103 };
104 
105 static void __davinci_mdio_reset(struct davinci_mdio_data *data)
106 {
107 	u32 mdio_in, div, mdio_out_khz, access_time;
108 
109 	mdio_in = clk_get_rate(data->clk);
110 	div = (mdio_in / data->pdata.bus_freq) - 1;
111 	if (div > CONTROL_MAX_DIV)
112 		div = CONTROL_MAX_DIV;
113 
114 	/* set enable and clock divider */
115 	__raw_writel(div | CONTROL_ENABLE, &data->regs->control);
116 
117 	/*
118 	 * One mdio transaction consists of:
119 	 *	32 bits of preamble
120 	 *	32 bits of transferred data
121 	 *	24 bits of bus yield (not needed unless shared?)
122 	 */
123 	mdio_out_khz = mdio_in / (1000 * (div + 1));
124 	access_time  = (88 * 1000) / mdio_out_khz;
125 
126 	/*
127 	 * In the worst case, we could be kicking off a user-access immediately
128 	 * after the mdio bus scan state-machine triggered its own read.  If
129 	 * so, our request could get deferred by one access cycle.  We
130 	 * defensively allow for 4 access cycles.
131 	 */
132 	data->access_time = usecs_to_jiffies(access_time * 4);
133 	if (!data->access_time)
134 		data->access_time = 1;
135 }
136 
137 static int davinci_mdio_reset(struct mii_bus *bus)
138 {
139 	struct davinci_mdio_data *data = bus->priv;
140 	u32 phy_mask, ver;
141 
142 	__davinci_mdio_reset(data);
143 
144 	/* wait for scan logic to settle */
145 	msleep(PHY_MAX_ADDR * data->access_time);
146 
147 	/* dump hardware version info */
148 	ver = __raw_readl(&data->regs->version);
149 	dev_info(data->dev, "davinci mdio revision %d.%d\n",
150 		 (ver >> 8) & 0xff, ver & 0xff);
151 
152 	if (data->skip_scan)
153 		return 0;
154 
155 	/* get phy mask from the alive register */
156 	phy_mask = __raw_readl(&data->regs->alive);
157 	if (phy_mask) {
158 		/* restrict mdio bus to live phys only */
159 		dev_info(data->dev, "detected phy mask %x\n", ~phy_mask);
160 		phy_mask = ~phy_mask;
161 	} else {
162 		/* desperately scan all phys */
163 		dev_warn(data->dev, "no live phy, scanning all\n");
164 		phy_mask = 0;
165 	}
166 	data->bus->phy_mask = phy_mask;
167 
168 	return 0;
169 }
170 
171 /* wait until hardware is ready for another user access */
172 static inline int wait_for_user_access(struct davinci_mdio_data *data)
173 {
174 	struct davinci_mdio_regs __iomem *regs = data->regs;
175 	unsigned long timeout = jiffies + msecs_to_jiffies(MDIO_TIMEOUT);
176 	u32 reg;
177 
178 	while (time_after(timeout, jiffies)) {
179 		reg = __raw_readl(&regs->user[0].access);
180 		if ((reg & USERACCESS_GO) == 0)
181 			return 0;
182 
183 		reg = __raw_readl(&regs->control);
184 		if ((reg & CONTROL_IDLE) == 0)
185 			continue;
186 
187 		/*
188 		 * An emac soft_reset may have clobbered the mdio controller's
189 		 * state machine.  We need to reset and retry the current
190 		 * operation
191 		 */
192 		dev_warn(data->dev, "resetting idled controller\n");
193 		__davinci_mdio_reset(data);
194 		return -EAGAIN;
195 	}
196 
197 	reg = __raw_readl(&regs->user[0].access);
198 	if ((reg & USERACCESS_GO) == 0)
199 		return 0;
200 
201 	dev_err(data->dev, "timed out waiting for user access\n");
202 	return -ETIMEDOUT;
203 }
204 
205 /* wait until hardware state machine is idle */
206 static inline int wait_for_idle(struct davinci_mdio_data *data)
207 {
208 	struct davinci_mdio_regs __iomem *regs = data->regs;
209 	unsigned long timeout = jiffies + msecs_to_jiffies(MDIO_TIMEOUT);
210 
211 	while (time_after(timeout, jiffies)) {
212 		if (__raw_readl(&regs->control) & CONTROL_IDLE)
213 			return 0;
214 	}
215 	dev_err(data->dev, "timed out waiting for idle\n");
216 	return -ETIMEDOUT;
217 }
218 
219 static int davinci_mdio_read(struct mii_bus *bus, int phy_id, int phy_reg)
220 {
221 	struct davinci_mdio_data *data = bus->priv;
222 	u32 reg;
223 	int ret;
224 
225 	if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
226 		return -EINVAL;
227 
228 	spin_lock(&data->lock);
229 
230 	if (data->suspended) {
231 		spin_unlock(&data->lock);
232 		return -ENODEV;
233 	}
234 
235 	reg = (USERACCESS_GO | USERACCESS_READ | (phy_reg << 21) |
236 	       (phy_id << 16));
237 
238 	while (1) {
239 		ret = wait_for_user_access(data);
240 		if (ret == -EAGAIN)
241 			continue;
242 		if (ret < 0)
243 			break;
244 
245 		__raw_writel(reg, &data->regs->user[0].access);
246 
247 		ret = wait_for_user_access(data);
248 		if (ret == -EAGAIN)
249 			continue;
250 		if (ret < 0)
251 			break;
252 
253 		reg = __raw_readl(&data->regs->user[0].access);
254 		ret = (reg & USERACCESS_ACK) ? (reg & USERACCESS_DATA) : -EIO;
255 		break;
256 	}
257 
258 	spin_unlock(&data->lock);
259 
260 	return ret;
261 }
262 
263 static int davinci_mdio_write(struct mii_bus *bus, int phy_id,
264 			      int phy_reg, u16 phy_data)
265 {
266 	struct davinci_mdio_data *data = bus->priv;
267 	u32 reg;
268 	int ret;
269 
270 	if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
271 		return -EINVAL;
272 
273 	spin_lock(&data->lock);
274 
275 	if (data->suspended) {
276 		spin_unlock(&data->lock);
277 		return -ENODEV;
278 	}
279 
280 	reg = (USERACCESS_GO | USERACCESS_WRITE | (phy_reg << 21) |
281 		   (phy_id << 16) | (phy_data & USERACCESS_DATA));
282 
283 	while (1) {
284 		ret = wait_for_user_access(data);
285 		if (ret == -EAGAIN)
286 			continue;
287 		if (ret < 0)
288 			break;
289 
290 		__raw_writel(reg, &data->regs->user[0].access);
291 
292 		ret = wait_for_user_access(data);
293 		if (ret == -EAGAIN)
294 			continue;
295 		break;
296 	}
297 
298 	spin_unlock(&data->lock);
299 
300 	return 0;
301 }
302 
303 #if IS_ENABLED(CONFIG_OF)
304 static int davinci_mdio_probe_dt(struct mdio_platform_data *data,
305 			 struct platform_device *pdev)
306 {
307 	struct device_node *node = pdev->dev.of_node;
308 	u32 prop;
309 
310 	if (!node)
311 		return -EINVAL;
312 
313 	if (of_property_read_u32(node, "bus_freq", &prop)) {
314 		dev_err(&pdev->dev, "Missing bus_freq property in the DT.\n");
315 		return -EINVAL;
316 	}
317 	data->bus_freq = prop;
318 
319 	return 0;
320 }
321 #endif
322 
323 static int davinci_mdio_probe(struct platform_device *pdev)
324 {
325 	struct mdio_platform_data *pdata = dev_get_platdata(&pdev->dev);
326 	struct device *dev = &pdev->dev;
327 	struct davinci_mdio_data *data;
328 	struct resource *res;
329 	struct phy_device *phy;
330 	int ret, addr;
331 
332 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
333 	if (!data)
334 		return -ENOMEM;
335 
336 	data->bus = devm_mdiobus_alloc(dev);
337 	if (!data->bus) {
338 		dev_err(dev, "failed to alloc mii bus\n");
339 		return -ENOMEM;
340 	}
341 
342 	if (dev->of_node) {
343 		if (davinci_mdio_probe_dt(&data->pdata, pdev))
344 			data->pdata = default_pdata;
345 		snprintf(data->bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);
346 	} else {
347 		data->pdata = pdata ? (*pdata) : default_pdata;
348 		snprintf(data->bus->id, MII_BUS_ID_SIZE, "%s-%x",
349 			 pdev->name, pdev->id);
350 	}
351 
352 	data->bus->name		= dev_name(dev);
353 	data->bus->read		= davinci_mdio_read,
354 	data->bus->write	= davinci_mdio_write,
355 	data->bus->reset	= davinci_mdio_reset,
356 	data->bus->parent	= dev;
357 	data->bus->priv		= data;
358 
359 	pm_runtime_enable(&pdev->dev);
360 	pm_runtime_get_sync(&pdev->dev);
361 	data->clk = devm_clk_get(dev, "fck");
362 	if (IS_ERR(data->clk)) {
363 		dev_err(dev, "failed to get device clock\n");
364 		ret = PTR_ERR(data->clk);
365 		data->clk = NULL;
366 		goto bail_out;
367 	}
368 
369 	dev_set_drvdata(dev, data);
370 	data->dev = dev;
371 	spin_lock_init(&data->lock);
372 
373 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
374 	data->regs = devm_ioremap_resource(dev, res);
375 	if (IS_ERR(data->regs)) {
376 		ret = PTR_ERR(data->regs);
377 		goto bail_out;
378 	}
379 
380 	/* register the mii bus
381 	 * Create PHYs from DT only in case if PHY child nodes are explicitly
382 	 * defined to support backward compatibility with DTs which assume that
383 	 * Davinci MDIO will always scan the bus for PHYs detection.
384 	 */
385 	if (dev->of_node && of_get_child_count(dev->of_node)) {
386 		data->skip_scan = true;
387 		ret = of_mdiobus_register(data->bus, dev->of_node);
388 	} else {
389 		ret = mdiobus_register(data->bus);
390 	}
391 	if (ret)
392 		goto bail_out;
393 
394 	/* scan and dump the bus */
395 	for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
396 		phy = data->bus->phy_map[addr];
397 		if (phy) {
398 			dev_info(dev, "phy[%d]: device %s, driver %s\n",
399 				 phy->addr, dev_name(&phy->dev),
400 				 phy->drv ? phy->drv->name : "unknown");
401 		}
402 	}
403 
404 	return 0;
405 
406 bail_out:
407 	pm_runtime_put_sync(&pdev->dev);
408 	pm_runtime_disable(&pdev->dev);
409 
410 	return ret;
411 }
412 
413 static int davinci_mdio_remove(struct platform_device *pdev)
414 {
415 	struct davinci_mdio_data *data = platform_get_drvdata(pdev);
416 
417 	if (data->bus)
418 		mdiobus_unregister(data->bus);
419 
420 	pm_runtime_put_sync(&pdev->dev);
421 	pm_runtime_disable(&pdev->dev);
422 
423 	return 0;
424 }
425 
426 #ifdef CONFIG_PM_SLEEP
427 static int davinci_mdio_suspend(struct device *dev)
428 {
429 	struct davinci_mdio_data *data = dev_get_drvdata(dev);
430 	u32 ctrl;
431 
432 	spin_lock(&data->lock);
433 
434 	/* shutdown the scan state machine */
435 	ctrl = __raw_readl(&data->regs->control);
436 	ctrl &= ~CONTROL_ENABLE;
437 	__raw_writel(ctrl, &data->regs->control);
438 	wait_for_idle(data);
439 
440 	data->suspended = true;
441 	spin_unlock(&data->lock);
442 	pm_runtime_put_sync(data->dev);
443 
444 	/* Select sleep pin state */
445 	pinctrl_pm_select_sleep_state(dev);
446 
447 	return 0;
448 }
449 
450 static int davinci_mdio_resume(struct device *dev)
451 {
452 	struct davinci_mdio_data *data = dev_get_drvdata(dev);
453 
454 	/* Select default pin state */
455 	pinctrl_pm_select_default_state(dev);
456 
457 	pm_runtime_get_sync(data->dev);
458 
459 	spin_lock(&data->lock);
460 	/* restart the scan state machine */
461 	__davinci_mdio_reset(data);
462 
463 	data->suspended = false;
464 	spin_unlock(&data->lock);
465 
466 	return 0;
467 }
468 #endif
469 
470 static const struct dev_pm_ops davinci_mdio_pm_ops = {
471 	SET_LATE_SYSTEM_SLEEP_PM_OPS(davinci_mdio_suspend, davinci_mdio_resume)
472 };
473 
474 #if IS_ENABLED(CONFIG_OF)
475 static const struct of_device_id davinci_mdio_of_mtable[] = {
476 	{ .compatible = "ti,davinci_mdio", },
477 	{ /* sentinel */ },
478 };
479 MODULE_DEVICE_TABLE(of, davinci_mdio_of_mtable);
480 #endif
481 
482 static struct platform_driver davinci_mdio_driver = {
483 	.driver = {
484 		.name	 = "davinci_mdio",
485 		.pm	 = &davinci_mdio_pm_ops,
486 		.of_match_table = of_match_ptr(davinci_mdio_of_mtable),
487 	},
488 	.probe = davinci_mdio_probe,
489 	.remove = davinci_mdio_remove,
490 };
491 
492 static int __init davinci_mdio_init(void)
493 {
494 	return platform_driver_register(&davinci_mdio_driver);
495 }
496 device_initcall(davinci_mdio_init);
497 
498 static void __exit davinci_mdio_exit(void)
499 {
500 	platform_driver_unregister(&davinci_mdio_driver);
501 }
502 module_exit(davinci_mdio_exit);
503 
504 MODULE_LICENSE("GPL");
505 MODULE_DESCRIPTION("DaVinci MDIO driver");
506