xref: /linux/drivers/net/ethernet/ti/Kconfig (revision fcc8487d477a3452a1d0ccbdd4c5e0e1e3cb8bed)
1#
2# TI device configuration
3#
4
5config NET_VENDOR_TI
6	bool "Texas Instruments (TI) devices"
7	default y
8	depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
9	---help---
10	  If you have a network (Ethernet) card belonging to this class, say Y.
11
12	  Note that the answer to this question doesn't directly affect the
13	  kernel: saying N will just cause the configurator to skip all
14	  the questions about TI devices. If you say Y, you will be asked for
15	  your specific card in the following questions.
16
17if NET_VENDOR_TI
18
19config TI_DAVINCI_EMAC
20	tristate "TI DaVinci EMAC Support"
21	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
22	select TI_DAVINCI_MDIO
23	select TI_DAVINCI_CPDMA
24	select PHYLIB
25	---help---
26	  This driver supports TI's DaVinci Ethernet .
27
28	  To compile this driver as a module, choose M here: the module
29	  will be called davinci_emac_driver.  This is recommended.
30
31config TI_DAVINCI_MDIO
32	tristate "TI DaVinci MDIO Support"
33	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
34	select PHYLIB
35	---help---
36	  This driver supports TI's DaVinci MDIO module.
37
38	  To compile this driver as a module, choose M here: the module
39	  will be called davinci_mdio.  This is recommended.
40
41config TI_DAVINCI_CPDMA
42	tristate "TI DaVinci CPDMA Support"
43	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
44	---help---
45	  This driver supports TI's DaVinci CPDMA dma engine.
46
47	  To compile this driver as a module, choose M here: the module
48	  will be called davinci_cpdma.  This is recommended.
49
50config TI_CPSW_PHY_SEL
51	bool
52	---help---
53	  This driver supports configuring of the phy mode connected to
54	  the CPSW.
55
56config TI_CPSW_ALE
57	tristate "TI CPSW ALE Support"
58	---help---
59	  This driver supports TI's CPSW ALE module.
60
61config TI_CPSW
62	tristate "TI CPSW Switch Support"
63	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
64	select TI_DAVINCI_CPDMA
65	select TI_DAVINCI_MDIO
66	select TI_CPSW_PHY_SEL
67	select TI_CPSW_ALE
68	select MFD_SYSCON
69	select REGMAP
70	---help---
71	  This driver supports TI's CPSW Ethernet Switch.
72
73	  To compile this driver as a module, choose M here: the module
74	  will be called cpsw.
75
76config TI_CPTS
77	bool "TI Common Platform Time Sync (CPTS) Support"
78	depends on TI_CPSW || TI_KEYSTONE_NETCP
79	depends on POSIX_TIMERS
80	---help---
81	  This driver supports the Common Platform Time Sync unit of
82	  the CPSW Ethernet Switch and Keystone 2 1g/10g Switch Subsystem.
83	  The unit can time stamp PTP UDP/IPv4 and Layer 2 packets, and the
84	  driver offers a PTP Hardware Clock.
85
86config TI_CPTS_MOD
87	tristate
88	depends on TI_CPTS
89	default y if TI_CPSW=y || TI_KEYSTONE_NETCP=y
90	select NET_PTP_CLASSIFY
91	imply PTP_1588_CLOCK
92	default m
93
94config TI_KEYSTONE_NETCP
95	tristate "TI Keystone NETCP Core Support"
96	select TI_CPSW_ALE
97	select TI_DAVINCI_MDIO
98	depends on OF
99	depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS
100	---help---
101	  This driver supports TI's Keystone NETCP Core.
102
103	  To compile this driver as a module, choose M here: the module
104	  will be called keystone_netcp.
105
106config TI_KEYSTONE_NETCP_ETHSS
107	depends on TI_KEYSTONE_NETCP
108	tristate "TI Keystone NETCP Ethernet subsystem Support"
109	---help---
110
111	  To compile this driver as a module, choose M here: the module
112	  will be called keystone_netcp_ethss.
113
114config TLAN
115	tristate "TI ThunderLAN support"
116	depends on (PCI || EISA)
117	---help---
118	  If you have a PCI Ethernet network card based on the ThunderLAN chip
119	  which is supported by this driver, say Y here.
120
121	  Devices currently supported by this driver are Compaq Netelligent,
122	  Compaq NetFlex and Olicom cards.  Please read the file
123	  <file:Documentation/networking/tlan.txt> for more details.
124
125	  To compile this driver as a module, choose M here. The module
126	  will be called tlan.
127
128	  Please email feedback to <torben.mathiasen@compaq.com>.
129
130config CPMAC
131	tristate "TI AR7 CPMAC Ethernet support"
132	depends on AR7
133	select PHYLIB
134	---help---
135	  TI AR7 CPMAC Ethernet support
136
137endif # NET_VENDOR_TI
138