xref: /linux/drivers/net/ethernet/ti/Kconfig (revision 2ba9268dd603d23e17643437b2246acb6844953b)
1#
2# TI device configuration
3#
4
5config NET_VENDOR_TI
6	bool "Texas Instruments (TI) devices"
7	default y
8	depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
9	---help---
10	  If you have a network (Ethernet) card belonging to this class, say Y
11	  and read the Ethernet-HOWTO, available from
12	  <http://www.tldp.org/docs.html#howto>.
13
14	  Note that the answer to this question doesn't directly affect the
15	  kernel: saying N will just cause the configurator to skip all
16	  the questions about TI devices. If you say Y, you will be asked for
17	  your specific card in the following questions.
18
19if NET_VENDOR_TI
20
21config TI_DAVINCI_EMAC
22	tristate "TI DaVinci EMAC Support"
23	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
24	select TI_DAVINCI_MDIO
25	select TI_DAVINCI_CPDMA
26	select PHYLIB
27	---help---
28	  This driver supports TI's DaVinci Ethernet .
29
30	  To compile this driver as a module, choose M here: the module
31	  will be called davinci_emac_driver.  This is recommended.
32
33config TI_DAVINCI_MDIO
34	tristate "TI DaVinci MDIO Support"
35	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
36	select PHYLIB
37	---help---
38	  This driver supports TI's DaVinci MDIO module.
39
40	  To compile this driver as a module, choose M here: the module
41	  will be called davinci_mdio.  This is recommended.
42
43config TI_DAVINCI_CPDMA
44	tristate "TI DaVinci CPDMA Support"
45	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
46	---help---
47	  This driver supports TI's DaVinci CPDMA dma engine.
48
49	  To compile this driver as a module, choose M here: the module
50	  will be called davinci_cpdma.  This is recommended.
51
52config TI_CPSW_PHY_SEL
53	bool "TI CPSW Switch Phy sel Support"
54	depends on TI_CPSW
55	---help---
56	  This driver supports configuring of the phy mode connected to
57	  the CPSW.
58
59config TI_CPSW_ALE
60	tristate "TI CPSW ALE Support"
61	---help---
62	  This driver supports TI's CPSW ALE module.
63
64config TI_CPSW
65	tristate "TI CPSW Switch Support"
66	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
67	select TI_DAVINCI_CPDMA
68	select TI_DAVINCI_MDIO
69	select TI_CPSW_PHY_SEL
70	select TI_CPSW_ALE
71	select MFD_SYSCON
72	select REGMAP
73	---help---
74	  This driver supports TI's CPSW Ethernet Switch.
75
76	  To compile this driver as a module, choose M here: the module
77	  will be called cpsw.
78
79config TI_CPTS
80	bool "TI Common Platform Time Sync (CPTS) Support"
81	depends on TI_CPSW
82	select PTP_1588_CLOCK
83	---help---
84	  This driver supports the Common Platform Time Sync unit of
85	  the CPSW Ethernet Switch. The unit can time stamp PTP UDP/IPv4
86	  and Layer 2 packets, and the driver offers a PTP Hardware Clock.
87
88config TI_KEYSTONE_NETCP
89	tristate "TI Keystone NETCP Core Support"
90	select TI_CPSW_ALE
91	depends on OF
92	depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS
93	---help---
94	  This driver supports TI's Keystone NETCP Core.
95
96	  To compile this driver as a module, choose M here: the module
97	  will be called keystone_netcp.
98
99config TI_KEYSTONE_NETCP_ETHSS
100	depends on TI_KEYSTONE_NETCP
101	tristate "TI Keystone NETCP Ethernet subsystem Support"
102	---help---
103
104	  To compile this driver as a module, choose M here: the module
105	  will be called keystone_netcp_ethss.
106
107config TLAN
108	tristate "TI ThunderLAN support"
109	depends on (PCI || EISA)
110	---help---
111	  If you have a PCI Ethernet network card based on the ThunderLAN chip
112	  which is supported by this driver, say Y and read the
113	  Ethernet-HOWTO, available from
114	  <http://www.tldp.org/docs.html#howto>.
115
116	  Devices currently supported by this driver are Compaq Netelligent,
117	  Compaq NetFlex and Olicom cards.  Please read the file
118	  <file:Documentation/networking/tlan.txt> for more details.
119
120	  To compile this driver as a module, choose M here. The module
121	  will be called tlan.
122
123	  Please email feedback to <torben.mathiasen@compaq.com>.
124
125config CPMAC
126	tristate "TI AR7 CPMAC Ethernet support"
127	depends on AR7
128	select PHYLIB
129	---help---
130	  TI AR7 CPMAC Ethernet support
131
132endif # NET_VENDOR_TI
133