1 // SPDX-License-Identifier: GPL-2.0-only 2 /******************************************************************************* 3 This contains the functions to handle the platform driver. 4 5 Copyright (C) 2007-2011 STMicroelectronics Ltd 6 7 8 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> 9 *******************************************************************************/ 10 11 #include <linux/platform_device.h> 12 #include <linux/pm_runtime.h> 13 #include <linux/module.h> 14 #include <linux/io.h> 15 #include <linux/of.h> 16 #include <linux/of_net.h> 17 #include <linux/of_device.h> 18 #include <linux/of_mdio.h> 19 20 #include "stmmac.h" 21 #include "stmmac_platform.h" 22 23 #ifdef CONFIG_OF 24 25 /** 26 * dwmac1000_validate_mcast_bins - validates the number of Multicast filter bins 27 * @dev: struct device of the platform device 28 * @mcast_bins: Multicast filtering bins 29 * Description: 30 * this function validates the number of Multicast filtering bins specified 31 * by the configuration through the device tree. The Synopsys GMAC supports 32 * 64 bins, 128 bins, or 256 bins. "bins" refer to the division of CRC 33 * number space. 64 bins correspond to 6 bits of the CRC, 128 corresponds 34 * to 7 bits, and 256 refers to 8 bits of the CRC. Any other setting is 35 * invalid and will cause the filtering algorithm to use Multicast 36 * promiscuous mode. 37 */ 38 static int dwmac1000_validate_mcast_bins(struct device *dev, int mcast_bins) 39 { 40 int x = mcast_bins; 41 42 switch (x) { 43 case HASH_TABLE_SIZE: 44 case 128: 45 case 256: 46 break; 47 default: 48 x = 0; 49 dev_info(dev, "Hash table entries set to unexpected value %d\n", 50 mcast_bins); 51 break; 52 } 53 return x; 54 } 55 56 /** 57 * dwmac1000_validate_ucast_entries - validate the Unicast address entries 58 * @dev: struct device of the platform device 59 * @ucast_entries: number of Unicast address entries 60 * Description: 61 * This function validates the number of Unicast address entries supported 62 * by a particular Synopsys 10/100/1000 controller. The Synopsys controller 63 * supports 1..32, 64, or 128 Unicast filter entries for it's Unicast filter 64 * logic. This function validates a valid, supported configuration is 65 * selected, and defaults to 1 Unicast address if an unsupported 66 * configuration is selected. 67 */ 68 static int dwmac1000_validate_ucast_entries(struct device *dev, 69 int ucast_entries) 70 { 71 int x = ucast_entries; 72 73 switch (x) { 74 case 1 ... 32: 75 case 64: 76 case 128: 77 break; 78 default: 79 x = 1; 80 dev_info(dev, "Unicast table entries set to unexpected value %d\n", 81 ucast_entries); 82 break; 83 } 84 return x; 85 } 86 87 /** 88 * stmmac_axi_setup - parse DT parameters for programming the AXI register 89 * @pdev: platform device 90 * Description: 91 * if required, from device-tree the AXI internal register can be tuned 92 * by using platform parameters. 93 */ 94 static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev) 95 { 96 struct device_node *np; 97 struct stmmac_axi *axi; 98 99 np = of_parse_phandle(pdev->dev.of_node, "snps,axi-config", 0); 100 if (!np) 101 return NULL; 102 103 axi = devm_kzalloc(&pdev->dev, sizeof(*axi), GFP_KERNEL); 104 if (!axi) { 105 of_node_put(np); 106 return ERR_PTR(-ENOMEM); 107 } 108 109 axi->axi_lpi_en = of_property_read_bool(np, "snps,lpi_en"); 110 axi->axi_xit_frm = of_property_read_bool(np, "snps,xit_frm"); 111 axi->axi_kbbe = of_property_read_bool(np, "snps,kbbe"); 112 axi->axi_fb = of_property_read_bool(np, "snps,fb"); 113 axi->axi_mb = of_property_read_bool(np, "snps,mb"); 114 axi->axi_rb = of_property_read_bool(np, "snps,rb"); 115 116 if (of_property_read_u32(np, "snps,wr_osr_lmt", &axi->axi_wr_osr_lmt)) 117 axi->axi_wr_osr_lmt = 1; 118 if (of_property_read_u32(np, "snps,rd_osr_lmt", &axi->axi_rd_osr_lmt)) 119 axi->axi_rd_osr_lmt = 1; 120 of_property_read_u32_array(np, "snps,blen", axi->axi_blen, AXI_BLEN); 121 of_node_put(np); 122 123 return axi; 124 } 125 126 /** 127 * stmmac_mtl_setup - parse DT parameters for multiple queues configuration 128 * @pdev: platform device 129 * @plat: enet data 130 */ 131 static int stmmac_mtl_setup(struct platform_device *pdev, 132 struct plat_stmmacenet_data *plat) 133 { 134 struct device_node *q_node; 135 struct device_node *rx_node; 136 struct device_node *tx_node; 137 u8 queue = 0; 138 int ret = 0; 139 140 /* For backwards-compatibility with device trees that don't have any 141 * snps,mtl-rx-config or snps,mtl-tx-config properties, we fall back 142 * to one RX and TX queues each. 143 */ 144 plat->rx_queues_to_use = 1; 145 plat->tx_queues_to_use = 1; 146 147 /* First Queue must always be in DCB mode. As MTL_QUEUE_DCB = 1 we need 148 * to always set this, otherwise Queue will be classified as AVB 149 * (because MTL_QUEUE_AVB = 0). 150 */ 151 plat->rx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB; 152 plat->tx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB; 153 154 rx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-rx-config", 0); 155 if (!rx_node) 156 return ret; 157 158 tx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-tx-config", 0); 159 if (!tx_node) { 160 of_node_put(rx_node); 161 return ret; 162 } 163 164 /* Processing RX queues common config */ 165 if (of_property_read_u32(rx_node, "snps,rx-queues-to-use", 166 &plat->rx_queues_to_use)) 167 plat->rx_queues_to_use = 1; 168 169 if (of_property_read_bool(rx_node, "snps,rx-sched-sp")) 170 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP; 171 else if (of_property_read_bool(rx_node, "snps,rx-sched-wsp")) 172 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_WSP; 173 else 174 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP; 175 176 /* Processing individual RX queue config */ 177 for_each_child_of_node(rx_node, q_node) { 178 if (queue >= plat->rx_queues_to_use) 179 break; 180 181 if (of_property_read_bool(q_node, "snps,dcb-algorithm")) 182 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; 183 else if (of_property_read_bool(q_node, "snps,avb-algorithm")) 184 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB; 185 else 186 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; 187 188 if (of_property_read_u32(q_node, "snps,map-to-dma-channel", 189 &plat->rx_queues_cfg[queue].chan)) 190 plat->rx_queues_cfg[queue].chan = queue; 191 /* TODO: Dynamic mapping to be included in the future */ 192 193 if (of_property_read_u32(q_node, "snps,priority", 194 &plat->rx_queues_cfg[queue].prio)) { 195 plat->rx_queues_cfg[queue].prio = 0; 196 plat->rx_queues_cfg[queue].use_prio = false; 197 } else { 198 plat->rx_queues_cfg[queue].use_prio = true; 199 } 200 201 /* RX queue specific packet type routing */ 202 if (of_property_read_bool(q_node, "snps,route-avcp")) 203 plat->rx_queues_cfg[queue].pkt_route = PACKET_AVCPQ; 204 else if (of_property_read_bool(q_node, "snps,route-ptp")) 205 plat->rx_queues_cfg[queue].pkt_route = PACKET_PTPQ; 206 else if (of_property_read_bool(q_node, "snps,route-dcbcp")) 207 plat->rx_queues_cfg[queue].pkt_route = PACKET_DCBCPQ; 208 else if (of_property_read_bool(q_node, "snps,route-up")) 209 plat->rx_queues_cfg[queue].pkt_route = PACKET_UPQ; 210 else if (of_property_read_bool(q_node, "snps,route-multi-broad")) 211 plat->rx_queues_cfg[queue].pkt_route = PACKET_MCBCQ; 212 else 213 plat->rx_queues_cfg[queue].pkt_route = 0x0; 214 215 queue++; 216 } 217 if (queue != plat->rx_queues_to_use) { 218 ret = -EINVAL; 219 dev_err(&pdev->dev, "Not all RX queues were configured\n"); 220 goto out; 221 } 222 223 /* Processing TX queues common config */ 224 if (of_property_read_u32(tx_node, "snps,tx-queues-to-use", 225 &plat->tx_queues_to_use)) 226 plat->tx_queues_to_use = 1; 227 228 if (of_property_read_bool(tx_node, "snps,tx-sched-wrr")) 229 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR; 230 else if (of_property_read_bool(tx_node, "snps,tx-sched-wfq")) 231 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WFQ; 232 else if (of_property_read_bool(tx_node, "snps,tx-sched-dwrr")) 233 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_DWRR; 234 else 235 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP; 236 237 queue = 0; 238 239 /* Processing individual TX queue config */ 240 for_each_child_of_node(tx_node, q_node) { 241 if (queue >= plat->tx_queues_to_use) 242 break; 243 244 if (of_property_read_u32(q_node, "snps,weight", 245 &plat->tx_queues_cfg[queue].weight)) 246 plat->tx_queues_cfg[queue].weight = 0x10 + queue; 247 248 if (of_property_read_bool(q_node, "snps,dcb-algorithm")) { 249 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; 250 } else if (of_property_read_bool(q_node, 251 "snps,avb-algorithm")) { 252 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB; 253 254 /* Credit Base Shaper parameters used by AVB */ 255 if (of_property_read_u32(q_node, "snps,send_slope", 256 &plat->tx_queues_cfg[queue].send_slope)) 257 plat->tx_queues_cfg[queue].send_slope = 0x0; 258 if (of_property_read_u32(q_node, "snps,idle_slope", 259 &plat->tx_queues_cfg[queue].idle_slope)) 260 plat->tx_queues_cfg[queue].idle_slope = 0x0; 261 if (of_property_read_u32(q_node, "snps,high_credit", 262 &plat->tx_queues_cfg[queue].high_credit)) 263 plat->tx_queues_cfg[queue].high_credit = 0x0; 264 if (of_property_read_u32(q_node, "snps,low_credit", 265 &plat->tx_queues_cfg[queue].low_credit)) 266 plat->tx_queues_cfg[queue].low_credit = 0x0; 267 } else { 268 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; 269 } 270 271 if (of_property_read_u32(q_node, "snps,priority", 272 &plat->tx_queues_cfg[queue].prio)) { 273 plat->tx_queues_cfg[queue].prio = 0; 274 plat->tx_queues_cfg[queue].use_prio = false; 275 } else { 276 plat->tx_queues_cfg[queue].use_prio = true; 277 } 278 279 queue++; 280 } 281 if (queue != plat->tx_queues_to_use) { 282 ret = -EINVAL; 283 dev_err(&pdev->dev, "Not all TX queues were configured\n"); 284 goto out; 285 } 286 287 out: 288 of_node_put(rx_node); 289 of_node_put(tx_node); 290 of_node_put(q_node); 291 292 return ret; 293 } 294 295 /** 296 * stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources 297 * @plat: driver data platform structure 298 * @np: device tree node 299 * @dev: device pointer 300 * Description: 301 * The mdio bus will be allocated in case of a phy transceiver is on board; 302 * it will be NULL if the fixed-link is configured. 303 * If there is the "snps,dwmac-mdio" sub-node the mdio will be allocated 304 * in any case (for DSA, mdio must be registered even if fixed-link). 305 * The table below sums the supported configurations: 306 * ------------------------------- 307 * snps,phy-addr | Y 308 * ------------------------------- 309 * phy-handle | Y 310 * ------------------------------- 311 * fixed-link | N 312 * ------------------------------- 313 * snps,dwmac-mdio | 314 * even if | Y 315 * fixed-link | 316 * ------------------------------- 317 * 318 * It returns 0 in case of success otherwise -ENODEV. 319 */ 320 static int stmmac_dt_phy(struct plat_stmmacenet_data *plat, 321 struct device_node *np, struct device *dev) 322 { 323 bool mdio = !of_phy_is_fixed_link(np); 324 static const struct of_device_id need_mdio_ids[] = { 325 { .compatible = "snps,dwc-qos-ethernet-4.10" }, 326 {}, 327 }; 328 329 if (of_match_node(need_mdio_ids, np)) { 330 plat->mdio_node = of_get_child_by_name(np, "mdio"); 331 } else { 332 /** 333 * If snps,dwmac-mdio is passed from DT, always register 334 * the MDIO 335 */ 336 for_each_child_of_node(np, plat->mdio_node) { 337 if (of_device_is_compatible(plat->mdio_node, 338 "snps,dwmac-mdio")) 339 break; 340 } 341 } 342 343 if (plat->mdio_node) { 344 dev_dbg(dev, "Found MDIO subnode\n"); 345 mdio = true; 346 } 347 348 if (mdio) { 349 plat->mdio_bus_data = 350 devm_kzalloc(dev, sizeof(struct stmmac_mdio_bus_data), 351 GFP_KERNEL); 352 if (!plat->mdio_bus_data) 353 return -ENOMEM; 354 355 plat->mdio_bus_data->needs_reset = true; 356 } 357 358 return 0; 359 } 360 361 /** 362 * stmmac_of_get_mac_mode - retrieves the interface of the MAC 363 * @np: - device-tree node 364 * Description: 365 * Similar to `of_get_phy_mode()`, this function will retrieve (from 366 * the device-tree) the interface mode on the MAC side. This assumes 367 * that there is mode converter in-between the MAC & PHY 368 * (e.g. GMII-to-RGMII). 369 */ 370 static int stmmac_of_get_mac_mode(struct device_node *np) 371 { 372 const char *pm; 373 int err, i; 374 375 err = of_property_read_string(np, "mac-mode", &pm); 376 if (err < 0) 377 return err; 378 379 for (i = 0; i < PHY_INTERFACE_MODE_MAX; i++) { 380 if (!strcasecmp(pm, phy_modes(i))) 381 return i; 382 } 383 384 return -ENODEV; 385 } 386 387 /** 388 * stmmac_probe_config_dt - parse device-tree driver parameters 389 * @pdev: platform_device structure 390 * @mac: MAC address to use 391 * Description: 392 * this function is to read the driver parameters from device-tree and 393 * set some private fields that will be used by the main at runtime. 394 */ 395 struct plat_stmmacenet_data * 396 stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) 397 { 398 struct device_node *np = pdev->dev.of_node; 399 struct plat_stmmacenet_data *plat; 400 struct stmmac_dma_cfg *dma_cfg; 401 int phy_mode; 402 void *ret; 403 int rc; 404 405 plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); 406 if (!plat) 407 return ERR_PTR(-ENOMEM); 408 409 rc = of_get_mac_address(np, mac); 410 if (rc) { 411 if (rc == -EPROBE_DEFER) 412 return ERR_PTR(rc); 413 414 eth_zero_addr(mac); 415 } 416 417 phy_mode = device_get_phy_mode(&pdev->dev); 418 if (phy_mode < 0) 419 return ERR_PTR(phy_mode); 420 421 plat->phy_interface = phy_mode; 422 plat->interface = stmmac_of_get_mac_mode(np); 423 if (plat->interface < 0) 424 plat->interface = plat->phy_interface; 425 426 /* Some wrapper drivers still rely on phy_node. Let's save it while 427 * they are not converted to phylink. */ 428 plat->phy_node = of_parse_phandle(np, "phy-handle", 0); 429 430 /* PHYLINK automatically parses the phy-handle property */ 431 plat->phylink_node = np; 432 433 /* Get max speed of operation from device tree */ 434 of_property_read_u32(np, "max-speed", &plat->max_speed); 435 436 plat->bus_id = of_alias_get_id(np, "ethernet"); 437 if (plat->bus_id < 0) 438 plat->bus_id = 0; 439 440 /* Default to phy auto-detection */ 441 plat->phy_addr = -1; 442 443 /* Default to get clk_csr from stmmac_clk_csr_set(), 444 * or get clk_csr from device tree. 445 */ 446 plat->clk_csr = -1; 447 if (of_property_read_u32(np, "snps,clk-csr", &plat->clk_csr)) 448 of_property_read_u32(np, "clk_csr", &plat->clk_csr); 449 450 /* "snps,phy-addr" is not a standard property. Mark it as deprecated 451 * and warn of its use. Remove this when phy node support is added. 452 */ 453 if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0) 454 dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n"); 455 456 /* To Configure PHY by using all device-tree supported properties */ 457 rc = stmmac_dt_phy(plat, np, &pdev->dev); 458 if (rc) 459 return ERR_PTR(rc); 460 461 of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size); 462 463 of_property_read_u32(np, "rx-fifo-depth", &plat->rx_fifo_size); 464 465 plat->force_sf_dma_mode = 466 of_property_read_bool(np, "snps,force_sf_dma_mode"); 467 468 plat->en_tx_lpi_clockgating = 469 of_property_read_bool(np, "snps,en-tx-lpi-clockgating"); 470 471 /* Set the maxmtu to a default of JUMBO_LEN in case the 472 * parameter is not present in the device tree. 473 */ 474 plat->maxmtu = JUMBO_LEN; 475 476 /* Set default value for multicast hash bins */ 477 plat->multicast_filter_bins = HASH_TABLE_SIZE; 478 479 /* Set default value for unicast filter entries */ 480 plat->unicast_filter_entries = 1; 481 482 /* 483 * Currently only the properties needed on SPEAr600 484 * are provided. All other properties should be added 485 * once needed on other platforms. 486 */ 487 if (of_device_is_compatible(np, "st,spear600-gmac") || 488 of_device_is_compatible(np, "snps,dwmac-3.50a") || 489 of_device_is_compatible(np, "snps,dwmac-3.70a") || 490 of_device_is_compatible(np, "snps,dwmac")) { 491 /* Note that the max-frame-size parameter as defined in the 492 * ePAPR v1.1 spec is defined as max-frame-size, it's 493 * actually used as the IEEE definition of MAC Client 494 * data, or MTU. The ePAPR specification is confusing as 495 * the definition is max-frame-size, but usage examples 496 * are clearly MTUs 497 */ 498 of_property_read_u32(np, "max-frame-size", &plat->maxmtu); 499 of_property_read_u32(np, "snps,multicast-filter-bins", 500 &plat->multicast_filter_bins); 501 of_property_read_u32(np, "snps,perfect-filter-entries", 502 &plat->unicast_filter_entries); 503 plat->unicast_filter_entries = dwmac1000_validate_ucast_entries( 504 &pdev->dev, plat->unicast_filter_entries); 505 plat->multicast_filter_bins = dwmac1000_validate_mcast_bins( 506 &pdev->dev, plat->multicast_filter_bins); 507 plat->has_gmac = 1; 508 plat->pmt = 1; 509 } 510 511 if (of_device_is_compatible(np, "snps,dwmac-3.40a")) { 512 plat->has_gmac = 1; 513 plat->enh_desc = 1; 514 plat->tx_coe = 1; 515 plat->bugged_jumbo = 1; 516 plat->pmt = 1; 517 } 518 519 if (of_device_is_compatible(np, "snps,dwmac-4.00") || 520 of_device_is_compatible(np, "snps,dwmac-4.10a") || 521 of_device_is_compatible(np, "snps,dwmac-4.20a") || 522 of_device_is_compatible(np, "snps,dwmac-5.10a")) { 523 plat->has_gmac4 = 1; 524 plat->has_gmac = 0; 525 plat->pmt = 1; 526 plat->tso_en = of_property_read_bool(np, "snps,tso"); 527 } 528 529 if (of_device_is_compatible(np, "snps,dwmac-3.610") || 530 of_device_is_compatible(np, "snps,dwmac-3.710")) { 531 plat->enh_desc = 1; 532 plat->bugged_jumbo = 1; 533 plat->force_sf_dma_mode = 1; 534 } 535 536 if (of_device_is_compatible(np, "snps,dwxgmac")) { 537 plat->has_xgmac = 1; 538 plat->pmt = 1; 539 plat->tso_en = of_property_read_bool(np, "snps,tso"); 540 } 541 542 dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg), 543 GFP_KERNEL); 544 if (!dma_cfg) { 545 stmmac_remove_config_dt(pdev, plat); 546 return ERR_PTR(-ENOMEM); 547 } 548 plat->dma_cfg = dma_cfg; 549 550 of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl); 551 if (!dma_cfg->pbl) 552 dma_cfg->pbl = DEFAULT_DMA_PBL; 553 of_property_read_u32(np, "snps,txpbl", &dma_cfg->txpbl); 554 of_property_read_u32(np, "snps,rxpbl", &dma_cfg->rxpbl); 555 dma_cfg->pblx8 = !of_property_read_bool(np, "snps,no-pbl-x8"); 556 557 dma_cfg->aal = of_property_read_bool(np, "snps,aal"); 558 dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst"); 559 dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst"); 560 561 plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode"); 562 if (plat->force_thresh_dma_mode && plat->force_sf_dma_mode) { 563 plat->force_sf_dma_mode = 0; 564 dev_warn(&pdev->dev, 565 "force_sf_dma_mode is ignored if force_thresh_dma_mode is set.\n"); 566 } 567 568 of_property_read_u32(np, "snps,ps-speed", &plat->mac_port_sel_speed); 569 570 plat->axi = stmmac_axi_setup(pdev); 571 572 rc = stmmac_mtl_setup(pdev, plat); 573 if (rc) { 574 stmmac_remove_config_dt(pdev, plat); 575 return ERR_PTR(rc); 576 } 577 578 /* clock setup */ 579 if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) { 580 plat->stmmac_clk = devm_clk_get(&pdev->dev, 581 STMMAC_RESOURCE_NAME); 582 if (IS_ERR(plat->stmmac_clk)) { 583 dev_warn(&pdev->dev, "Cannot get CSR clock\n"); 584 plat->stmmac_clk = NULL; 585 } 586 clk_prepare_enable(plat->stmmac_clk); 587 } 588 589 plat->pclk = devm_clk_get_optional(&pdev->dev, "pclk"); 590 if (IS_ERR(plat->pclk)) { 591 ret = plat->pclk; 592 goto error_pclk_get; 593 } 594 clk_prepare_enable(plat->pclk); 595 596 /* Fall-back to main clock in case of no PTP ref is passed */ 597 plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "ptp_ref"); 598 if (IS_ERR(plat->clk_ptp_ref)) { 599 plat->clk_ptp_rate = clk_get_rate(plat->stmmac_clk); 600 plat->clk_ptp_ref = NULL; 601 dev_info(&pdev->dev, "PTP uses main clock\n"); 602 } else { 603 plat->clk_ptp_rate = clk_get_rate(plat->clk_ptp_ref); 604 dev_dbg(&pdev->dev, "PTP rate %d\n", plat->clk_ptp_rate); 605 } 606 607 plat->stmmac_rst = devm_reset_control_get_optional(&pdev->dev, 608 STMMAC_RESOURCE_NAME); 609 if (IS_ERR(plat->stmmac_rst)) { 610 ret = plat->stmmac_rst; 611 goto error_hw_init; 612 } 613 614 plat->stmmac_ahb_rst = devm_reset_control_get_optional_shared( 615 &pdev->dev, "ahb"); 616 if (IS_ERR(plat->stmmac_ahb_rst)) { 617 ret = plat->stmmac_ahb_rst; 618 goto error_hw_init; 619 } 620 621 return plat; 622 623 error_hw_init: 624 clk_disable_unprepare(plat->pclk); 625 error_pclk_get: 626 clk_disable_unprepare(plat->stmmac_clk); 627 628 return ret; 629 } 630 631 /** 632 * stmmac_remove_config_dt - undo the effects of stmmac_probe_config_dt() 633 * @pdev: platform_device structure 634 * @plat: driver data platform structure 635 * 636 * Release resources claimed by stmmac_probe_config_dt(). 637 */ 638 void stmmac_remove_config_dt(struct platform_device *pdev, 639 struct plat_stmmacenet_data *plat) 640 { 641 clk_disable_unprepare(plat->stmmac_clk); 642 clk_disable_unprepare(plat->pclk); 643 of_node_put(plat->phy_node); 644 of_node_put(plat->mdio_node); 645 } 646 #else 647 struct plat_stmmacenet_data * 648 stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) 649 { 650 return ERR_PTR(-EINVAL); 651 } 652 653 void stmmac_remove_config_dt(struct platform_device *pdev, 654 struct plat_stmmacenet_data *plat) 655 { 656 } 657 #endif /* CONFIG_OF */ 658 EXPORT_SYMBOL_GPL(stmmac_probe_config_dt); 659 EXPORT_SYMBOL_GPL(stmmac_remove_config_dt); 660 661 int stmmac_get_platform_resources(struct platform_device *pdev, 662 struct stmmac_resources *stmmac_res) 663 { 664 memset(stmmac_res, 0, sizeof(*stmmac_res)); 665 666 /* Get IRQ information early to have an ability to ask for deferred 667 * probe if needed before we went too far with resource allocation. 668 */ 669 stmmac_res->irq = platform_get_irq_byname(pdev, "macirq"); 670 if (stmmac_res->irq < 0) 671 return stmmac_res->irq; 672 673 /* On some platforms e.g. SPEAr the wake up irq differs from the mac irq 674 * The external wake up irq can be passed through the platform code 675 * named as "eth_wake_irq" 676 * 677 * In case the wake up interrupt is not passed from the platform 678 * so the driver will continue to use the mac irq (ndev->irq) 679 */ 680 stmmac_res->wol_irq = 681 platform_get_irq_byname_optional(pdev, "eth_wake_irq"); 682 if (stmmac_res->wol_irq < 0) { 683 if (stmmac_res->wol_irq == -EPROBE_DEFER) 684 return -EPROBE_DEFER; 685 dev_info(&pdev->dev, "IRQ eth_wake_irq not found\n"); 686 stmmac_res->wol_irq = stmmac_res->irq; 687 } 688 689 stmmac_res->lpi_irq = 690 platform_get_irq_byname_optional(pdev, "eth_lpi"); 691 if (stmmac_res->lpi_irq < 0) { 692 if (stmmac_res->lpi_irq == -EPROBE_DEFER) 693 return -EPROBE_DEFER; 694 dev_info(&pdev->dev, "IRQ eth_lpi not found\n"); 695 } 696 697 stmmac_res->addr = devm_platform_ioremap_resource(pdev, 0); 698 699 return PTR_ERR_OR_ZERO(stmmac_res->addr); 700 } 701 EXPORT_SYMBOL_GPL(stmmac_get_platform_resources); 702 703 /** 704 * stmmac_pltfr_remove 705 * @pdev: platform device pointer 706 * Description: this function calls the main to free the net resources 707 * and calls the platforms hook and release the resources (e.g. mem). 708 */ 709 int stmmac_pltfr_remove(struct platform_device *pdev) 710 { 711 struct net_device *ndev = platform_get_drvdata(pdev); 712 struct stmmac_priv *priv = netdev_priv(ndev); 713 struct plat_stmmacenet_data *plat = priv->plat; 714 715 stmmac_dvr_remove(&pdev->dev); 716 717 if (plat->exit) 718 plat->exit(pdev, plat->bsp_priv); 719 720 stmmac_remove_config_dt(pdev, plat); 721 722 return 0; 723 } 724 EXPORT_SYMBOL_GPL(stmmac_pltfr_remove); 725 726 /** 727 * stmmac_pltfr_suspend 728 * @dev: device pointer 729 * Description: this function is invoked when suspend the driver and it direcly 730 * call the main suspend function and then, if required, on some platform, it 731 * can call an exit helper. 732 */ 733 static int __maybe_unused stmmac_pltfr_suspend(struct device *dev) 734 { 735 int ret; 736 struct net_device *ndev = dev_get_drvdata(dev); 737 struct stmmac_priv *priv = netdev_priv(ndev); 738 struct platform_device *pdev = to_platform_device(dev); 739 740 ret = stmmac_suspend(dev); 741 if (priv->plat->exit) 742 priv->plat->exit(pdev, priv->plat->bsp_priv); 743 744 return ret; 745 } 746 747 /** 748 * stmmac_pltfr_resume 749 * @dev: device pointer 750 * Description: this function is invoked when resume the driver before calling 751 * the main resume function, on some platforms, it can call own init helper 752 * if required. 753 */ 754 static int __maybe_unused stmmac_pltfr_resume(struct device *dev) 755 { 756 struct net_device *ndev = dev_get_drvdata(dev); 757 struct stmmac_priv *priv = netdev_priv(ndev); 758 struct platform_device *pdev = to_platform_device(dev); 759 760 if (priv->plat->init) 761 priv->plat->init(pdev, priv->plat->bsp_priv); 762 763 return stmmac_resume(dev); 764 } 765 766 static int __maybe_unused stmmac_runtime_suspend(struct device *dev) 767 { 768 struct net_device *ndev = dev_get_drvdata(dev); 769 struct stmmac_priv *priv = netdev_priv(ndev); 770 771 stmmac_bus_clks_config(priv, false); 772 773 return 0; 774 } 775 776 static int __maybe_unused stmmac_runtime_resume(struct device *dev) 777 { 778 struct net_device *ndev = dev_get_drvdata(dev); 779 struct stmmac_priv *priv = netdev_priv(ndev); 780 781 return stmmac_bus_clks_config(priv, true); 782 } 783 784 static int __maybe_unused stmmac_pltfr_noirq_suspend(struct device *dev) 785 { 786 struct net_device *ndev = dev_get_drvdata(dev); 787 struct stmmac_priv *priv = netdev_priv(ndev); 788 int ret; 789 790 if (!netif_running(ndev)) 791 return 0; 792 793 if (!device_may_wakeup(priv->device) || !priv->plat->pmt) { 794 /* Disable clock in case of PWM is off */ 795 clk_disable_unprepare(priv->plat->clk_ptp_ref); 796 797 ret = pm_runtime_force_suspend(dev); 798 if (ret) 799 return ret; 800 } 801 802 return 0; 803 } 804 805 static int __maybe_unused stmmac_pltfr_noirq_resume(struct device *dev) 806 { 807 struct net_device *ndev = dev_get_drvdata(dev); 808 struct stmmac_priv *priv = netdev_priv(ndev); 809 int ret; 810 811 if (!netif_running(ndev)) 812 return 0; 813 814 if (!device_may_wakeup(priv->device) || !priv->plat->pmt) { 815 /* enable the clk previously disabled */ 816 ret = pm_runtime_force_resume(dev); 817 if (ret) 818 return ret; 819 820 ret = clk_prepare_enable(priv->plat->clk_ptp_ref); 821 if (ret < 0) { 822 netdev_warn(priv->dev, 823 "failed to enable PTP reference clock: %pe\n", 824 ERR_PTR(ret)); 825 return ret; 826 } 827 } 828 829 return 0; 830 } 831 832 const struct dev_pm_ops stmmac_pltfr_pm_ops = { 833 SET_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_suspend, stmmac_pltfr_resume) 834 SET_RUNTIME_PM_OPS(stmmac_runtime_suspend, stmmac_runtime_resume, NULL) 835 SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_noirq_suspend, stmmac_pltfr_noirq_resume) 836 }; 837 EXPORT_SYMBOL_GPL(stmmac_pltfr_pm_ops); 838 839 MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet platform support"); 840 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); 841 MODULE_LICENSE("GPL"); 842