1 // SPDX-License-Identifier: GPL-2.0-only 2 /******************************************************************************* 3 This contains the functions to handle the platform driver. 4 5 Copyright (C) 2007-2011 STMicroelectronics Ltd 6 7 8 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> 9 *******************************************************************************/ 10 11 #include <linux/device.h> 12 #include <linux/platform_device.h> 13 #include <linux/pm_runtime.h> 14 #include <linux/module.h> 15 #include <linux/io.h> 16 #include <linux/of.h> 17 #include <linux/of_net.h> 18 #include <linux/of_mdio.h> 19 20 #include "stmmac.h" 21 #include "stmmac_platform.h" 22 23 #ifdef CONFIG_OF 24 25 /** 26 * dwmac1000_validate_mcast_bins - validates the number of Multicast filter bins 27 * @dev: struct device of the platform device 28 * @mcast_bins: Multicast filtering bins 29 * Description: 30 * this function validates the number of Multicast filtering bins specified 31 * by the configuration through the device tree. The Synopsys GMAC supports 32 * 64 bins, 128 bins, or 256 bins. "bins" refer to the division of CRC 33 * number space. 64 bins correspond to 6 bits of the CRC, 128 corresponds 34 * to 7 bits, and 256 refers to 8 bits of the CRC. Any other setting is 35 * invalid and will cause the filtering algorithm to use Multicast 36 * promiscuous mode. 37 */ 38 static int dwmac1000_validate_mcast_bins(struct device *dev, int mcast_bins) 39 { 40 int x = mcast_bins; 41 42 switch (x) { 43 case HASH_TABLE_SIZE: 44 case 128: 45 case 256: 46 break; 47 default: 48 x = 0; 49 dev_info(dev, "Hash table entries set to unexpected value %d\n", 50 mcast_bins); 51 break; 52 } 53 return x; 54 } 55 56 /** 57 * dwmac1000_validate_ucast_entries - validate the Unicast address entries 58 * @dev: struct device of the platform device 59 * @ucast_entries: number of Unicast address entries 60 * Description: 61 * This function validates the number of Unicast address entries supported 62 * by a particular Synopsys 10/100/1000 controller. The Synopsys controller 63 * supports 1..32, 64, or 128 Unicast filter entries for it's Unicast filter 64 * logic. This function validates a valid, supported configuration is 65 * selected, and defaults to 1 Unicast address if an unsupported 66 * configuration is selected. 67 */ 68 static int dwmac1000_validate_ucast_entries(struct device *dev, 69 int ucast_entries) 70 { 71 int x = ucast_entries; 72 73 switch (x) { 74 case 1 ... 32: 75 case 64: 76 case 128: 77 break; 78 default: 79 x = 1; 80 dev_info(dev, "Unicast table entries set to unexpected value %d\n", 81 ucast_entries); 82 break; 83 } 84 return x; 85 } 86 87 /** 88 * stmmac_axi_setup - parse DT parameters for programming the AXI register 89 * @pdev: platform device 90 * Description: 91 * if required, from device-tree the AXI internal register can be tuned 92 * by using platform parameters. 93 */ 94 static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev) 95 { 96 struct device_node *np; 97 struct stmmac_axi *axi; 98 99 np = of_parse_phandle(pdev->dev.of_node, "snps,axi-config", 0); 100 if (!np) 101 return NULL; 102 103 axi = devm_kzalloc(&pdev->dev, sizeof(*axi), GFP_KERNEL); 104 if (!axi) { 105 of_node_put(np); 106 return ERR_PTR(-ENOMEM); 107 } 108 109 axi->axi_lpi_en = of_property_read_bool(np, "snps,lpi_en"); 110 axi->axi_xit_frm = of_property_read_bool(np, "snps,xit_frm"); 111 axi->axi_kbbe = of_property_read_bool(np, "snps,kbbe"); 112 axi->axi_fb = of_property_read_bool(np, "snps,fb"); 113 axi->axi_mb = of_property_read_bool(np, "snps,mb"); 114 axi->axi_rb = of_property_read_bool(np, "snps,rb"); 115 116 if (of_property_read_u32(np, "snps,wr_osr_lmt", &axi->axi_wr_osr_lmt)) 117 axi->axi_wr_osr_lmt = 1; 118 if (of_property_read_u32(np, "snps,rd_osr_lmt", &axi->axi_rd_osr_lmt)) 119 axi->axi_rd_osr_lmt = 1; 120 of_property_read_u32_array(np, "snps,blen", axi->axi_blen, AXI_BLEN); 121 of_node_put(np); 122 123 return axi; 124 } 125 126 /** 127 * stmmac_mtl_setup - parse DT parameters for multiple queues configuration 128 * @pdev: platform device 129 * @plat: enet data 130 */ 131 static int stmmac_mtl_setup(struct platform_device *pdev, 132 struct plat_stmmacenet_data *plat) 133 { 134 struct device_node *q_node; 135 struct device_node *rx_node; 136 struct device_node *tx_node; 137 u8 queue = 0; 138 int ret = 0; 139 140 /* For backwards-compatibility with device trees that don't have any 141 * snps,mtl-rx-config or snps,mtl-tx-config properties, we fall back 142 * to one RX and TX queues each. 143 */ 144 plat->rx_queues_to_use = 1; 145 plat->tx_queues_to_use = 1; 146 147 /* First Queue must always be in DCB mode. As MTL_QUEUE_DCB = 1 we need 148 * to always set this, otherwise Queue will be classified as AVB 149 * (because MTL_QUEUE_AVB = 0). 150 */ 151 plat->rx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB; 152 plat->tx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB; 153 154 rx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-rx-config", 0); 155 if (!rx_node) 156 return ret; 157 158 tx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-tx-config", 0); 159 if (!tx_node) { 160 of_node_put(rx_node); 161 return ret; 162 } 163 164 /* Processing RX queues common config */ 165 if (of_property_read_u32(rx_node, "snps,rx-queues-to-use", 166 &plat->rx_queues_to_use)) 167 plat->rx_queues_to_use = 1; 168 169 if (of_property_read_bool(rx_node, "snps,rx-sched-sp")) 170 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP; 171 else if (of_property_read_bool(rx_node, "snps,rx-sched-wsp")) 172 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_WSP; 173 else 174 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP; 175 176 /* Processing individual RX queue config */ 177 for_each_child_of_node(rx_node, q_node) { 178 if (queue >= plat->rx_queues_to_use) 179 break; 180 181 if (of_property_read_bool(q_node, "snps,dcb-algorithm")) 182 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; 183 else if (of_property_read_bool(q_node, "snps,avb-algorithm")) 184 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB; 185 else 186 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; 187 188 if (of_property_read_u32(q_node, "snps,map-to-dma-channel", 189 &plat->rx_queues_cfg[queue].chan)) 190 plat->rx_queues_cfg[queue].chan = queue; 191 /* TODO: Dynamic mapping to be included in the future */ 192 193 if (of_property_read_u32(q_node, "snps,priority", 194 &plat->rx_queues_cfg[queue].prio)) { 195 plat->rx_queues_cfg[queue].prio = 0; 196 plat->rx_queues_cfg[queue].use_prio = false; 197 } else { 198 plat->rx_queues_cfg[queue].use_prio = true; 199 } 200 201 /* RX queue specific packet type routing */ 202 if (of_property_read_bool(q_node, "snps,route-avcp")) 203 plat->rx_queues_cfg[queue].pkt_route = PACKET_AVCPQ; 204 else if (of_property_read_bool(q_node, "snps,route-ptp")) 205 plat->rx_queues_cfg[queue].pkt_route = PACKET_PTPQ; 206 else if (of_property_read_bool(q_node, "snps,route-dcbcp")) 207 plat->rx_queues_cfg[queue].pkt_route = PACKET_DCBCPQ; 208 else if (of_property_read_bool(q_node, "snps,route-up")) 209 plat->rx_queues_cfg[queue].pkt_route = PACKET_UPQ; 210 else if (of_property_read_bool(q_node, "snps,route-multi-broad")) 211 plat->rx_queues_cfg[queue].pkt_route = PACKET_MCBCQ; 212 else 213 plat->rx_queues_cfg[queue].pkt_route = 0x0; 214 215 queue++; 216 } 217 if (queue != plat->rx_queues_to_use) { 218 ret = -EINVAL; 219 dev_err(&pdev->dev, "Not all RX queues were configured\n"); 220 goto out; 221 } 222 223 /* Processing TX queues common config */ 224 if (of_property_read_u32(tx_node, "snps,tx-queues-to-use", 225 &plat->tx_queues_to_use)) 226 plat->tx_queues_to_use = 1; 227 228 if (of_property_read_bool(tx_node, "snps,tx-sched-wrr")) 229 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR; 230 else if (of_property_read_bool(tx_node, "snps,tx-sched-wfq")) 231 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WFQ; 232 else if (of_property_read_bool(tx_node, "snps,tx-sched-dwrr")) 233 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_DWRR; 234 else 235 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP; 236 237 queue = 0; 238 239 /* Processing individual TX queue config */ 240 for_each_child_of_node(tx_node, q_node) { 241 if (queue >= plat->tx_queues_to_use) 242 break; 243 244 if (of_property_read_u32(q_node, "snps,weight", 245 &plat->tx_queues_cfg[queue].weight)) 246 plat->tx_queues_cfg[queue].weight = 0x10 + queue; 247 248 if (of_property_read_bool(q_node, "snps,dcb-algorithm")) { 249 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; 250 } else if (of_property_read_bool(q_node, 251 "snps,avb-algorithm")) { 252 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB; 253 254 /* Credit Base Shaper parameters used by AVB */ 255 if (of_property_read_u32(q_node, "snps,send_slope", 256 &plat->tx_queues_cfg[queue].send_slope)) 257 plat->tx_queues_cfg[queue].send_slope = 0x0; 258 if (of_property_read_u32(q_node, "snps,idle_slope", 259 &plat->tx_queues_cfg[queue].idle_slope)) 260 plat->tx_queues_cfg[queue].idle_slope = 0x0; 261 if (of_property_read_u32(q_node, "snps,high_credit", 262 &plat->tx_queues_cfg[queue].high_credit)) 263 plat->tx_queues_cfg[queue].high_credit = 0x0; 264 if (of_property_read_u32(q_node, "snps,low_credit", 265 &plat->tx_queues_cfg[queue].low_credit)) 266 plat->tx_queues_cfg[queue].low_credit = 0x0; 267 } else { 268 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; 269 } 270 271 if (of_property_read_u32(q_node, "snps,priority", 272 &plat->tx_queues_cfg[queue].prio)) { 273 plat->tx_queues_cfg[queue].prio = 0; 274 plat->tx_queues_cfg[queue].use_prio = false; 275 } else { 276 plat->tx_queues_cfg[queue].use_prio = true; 277 } 278 279 plat->tx_queues_cfg[queue].coe_unsupported = 280 of_property_read_bool(q_node, "snps,coe-unsupported"); 281 282 queue++; 283 } 284 if (queue != plat->tx_queues_to_use) { 285 ret = -EINVAL; 286 dev_err(&pdev->dev, "Not all TX queues were configured\n"); 287 goto out; 288 } 289 290 out: 291 of_node_put(rx_node); 292 of_node_put(tx_node); 293 of_node_put(q_node); 294 295 return ret; 296 } 297 298 /** 299 * stmmac_of_get_mdio() - Gets the MDIO bus from the devicetree. 300 * @np: devicetree node 301 * 302 * The MDIO bus will be searched for in the following ways: 303 * 1. The compatible is "snps,dwc-qos-ethernet-4.10" && a "mdio" named 304 * child node exists 305 * 2. A child node with the "snps,dwmac-mdio" compatible is present 306 * 307 * Return: The MDIO node if present otherwise NULL 308 */ 309 static struct device_node *stmmac_of_get_mdio(struct device_node *np) 310 { 311 static const struct of_device_id need_mdio_ids[] = { 312 { .compatible = "snps,dwc-qos-ethernet-4.10" }, 313 {}, 314 }; 315 struct device_node *mdio_node = NULL; 316 317 if (of_match_node(need_mdio_ids, np)) { 318 mdio_node = of_get_child_by_name(np, "mdio"); 319 } else { 320 /** 321 * If snps,dwmac-mdio is passed from DT, always register 322 * the MDIO 323 */ 324 for_each_child_of_node(np, mdio_node) { 325 if (of_device_is_compatible(mdio_node, 326 "snps,dwmac-mdio")) 327 break; 328 } 329 } 330 331 return mdio_node; 332 } 333 334 /** 335 * stmmac_mdio_setup() - Populate platform related MDIO structures. 336 * @plat: driver data platform structure 337 * @np: devicetree node 338 * @dev: device pointer 339 * 340 * This searches for MDIO information from the devicetree. 341 * If an MDIO node is found, it's assigned to plat->mdio_node and 342 * plat->mdio_bus_data is allocated. 343 * If no connection can be determined, just plat->mdio_bus_data is allocated 344 * to indicate a bus should be created and scanned for a phy. 345 * If it's determined there's no MDIO bus needed, both are left NULL. 346 * 347 * This expects that plat->phy_node has already been searched for. 348 * 349 * Return: 0 on success, errno otherwise. 350 */ 351 static int stmmac_mdio_setup(struct plat_stmmacenet_data *plat, 352 struct device_node *np, struct device *dev) 353 { 354 bool legacy_mdio; 355 356 plat->mdio_node = stmmac_of_get_mdio(np); 357 if (plat->mdio_node) 358 dev_dbg(dev, "Found MDIO subnode\n"); 359 360 /* Legacy devicetrees allowed for no MDIO bus description and expect 361 * the bus to be scanned for devices. If there's no phy or fixed-link 362 * described assume this is the case since there must be something 363 * connected to the MAC. 364 */ 365 legacy_mdio = !of_phy_is_fixed_link(np) && !plat->phy_node; 366 if (legacy_mdio) 367 dev_info(dev, "Deprecated MDIO bus assumption used\n"); 368 369 if (plat->mdio_node || legacy_mdio) { 370 plat->mdio_bus_data = devm_kzalloc(dev, 371 sizeof(*plat->mdio_bus_data), 372 GFP_KERNEL); 373 if (!plat->mdio_bus_data) 374 return -ENOMEM; 375 376 plat->mdio_bus_data->needs_reset = true; 377 } 378 379 return 0; 380 } 381 382 /** 383 * stmmac_of_get_mac_mode - retrieves the interface of the MAC 384 * @np: - device-tree node 385 * Description: 386 * Similar to `of_get_phy_mode()`, this function will retrieve (from 387 * the device-tree) the interface mode on the MAC side. This assumes 388 * that there is mode converter in-between the MAC & PHY 389 * (e.g. GMII-to-RGMII). 390 */ 391 static int stmmac_of_get_mac_mode(struct device_node *np) 392 { 393 const char *pm; 394 int err, i; 395 396 err = of_property_read_string(np, "mac-mode", &pm); 397 if (err < 0) 398 return err; 399 400 for (i = 0; i < PHY_INTERFACE_MODE_MAX; i++) { 401 if (!strcasecmp(pm, phy_modes(i))) 402 return i; 403 } 404 405 return -ENODEV; 406 } 407 408 /** 409 * stmmac_remove_config_dt - undo the effects of stmmac_probe_config_dt() 410 * @pdev: platform_device structure 411 * @plat: driver data platform structure 412 * 413 * Release resources claimed by stmmac_probe_config_dt(). 414 */ 415 static void stmmac_remove_config_dt(struct platform_device *pdev, 416 struct plat_stmmacenet_data *plat) 417 { 418 clk_disable_unprepare(plat->stmmac_clk); 419 clk_disable_unprepare(plat->pclk); 420 of_node_put(plat->phy_node); 421 of_node_put(plat->mdio_node); 422 } 423 424 /** 425 * stmmac_probe_config_dt - parse device-tree driver parameters 426 * @pdev: platform_device structure 427 * @mac: MAC address to use 428 * Description: 429 * this function is to read the driver parameters from device-tree and 430 * set some private fields that will be used by the main at runtime. 431 */ 432 static struct plat_stmmacenet_data * 433 stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) 434 { 435 struct device_node *np = pdev->dev.of_node; 436 struct plat_stmmacenet_data *plat; 437 struct stmmac_dma_cfg *dma_cfg; 438 int phy_mode; 439 void *ret; 440 int rc; 441 442 plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); 443 if (!plat) 444 return ERR_PTR(-ENOMEM); 445 446 rc = of_get_mac_address(np, mac); 447 if (rc) { 448 if (rc == -EPROBE_DEFER) 449 return ERR_PTR(rc); 450 451 eth_zero_addr(mac); 452 } 453 454 phy_mode = device_get_phy_mode(&pdev->dev); 455 if (phy_mode < 0) 456 return ERR_PTR(phy_mode); 457 458 plat->phy_interface = phy_mode; 459 rc = stmmac_of_get_mac_mode(np); 460 plat->mac_interface = rc < 0 ? plat->phy_interface : rc; 461 462 /* Some wrapper drivers still rely on phy_node. Let's save it while 463 * they are not converted to phylink. */ 464 plat->phy_node = of_parse_phandle(np, "phy-handle", 0); 465 466 /* PHYLINK automatically parses the phy-handle property */ 467 plat->port_node = of_fwnode_handle(np); 468 469 /* Get max speed of operation from device tree */ 470 of_property_read_u32(np, "max-speed", &plat->max_speed); 471 472 plat->bus_id = of_alias_get_id(np, "ethernet"); 473 if (plat->bus_id < 0) 474 plat->bus_id = 0; 475 476 /* Default to phy auto-detection */ 477 plat->phy_addr = -1; 478 479 /* Default to get clk_csr from stmmac_clk_csr_set(), 480 * or get clk_csr from device tree. 481 */ 482 plat->clk_csr = -1; 483 if (of_property_read_u32(np, "snps,clk-csr", &plat->clk_csr)) 484 of_property_read_u32(np, "clk_csr", &plat->clk_csr); 485 486 /* "snps,phy-addr" is not a standard property. Mark it as deprecated 487 * and warn of its use. Remove this when phy node support is added. 488 */ 489 if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0) 490 dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n"); 491 492 rc = stmmac_mdio_setup(plat, np, &pdev->dev); 493 if (rc) 494 return ERR_PTR(rc); 495 496 of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size); 497 498 of_property_read_u32(np, "rx-fifo-depth", &plat->rx_fifo_size); 499 500 plat->force_sf_dma_mode = 501 of_property_read_bool(np, "snps,force_sf_dma_mode"); 502 503 if (of_property_read_bool(np, "snps,en-tx-lpi-clockgating")) 504 plat->flags |= STMMAC_FLAG_EN_TX_LPI_CLOCKGATING; 505 506 /* Set the maxmtu to a default of JUMBO_LEN in case the 507 * parameter is not present in the device tree. 508 */ 509 plat->maxmtu = JUMBO_LEN; 510 511 /* Set default value for multicast hash bins */ 512 plat->multicast_filter_bins = HASH_TABLE_SIZE; 513 514 /* Set default value for unicast filter entries */ 515 plat->unicast_filter_entries = 1; 516 517 /* 518 * Currently only the properties needed on SPEAr600 519 * are provided. All other properties should be added 520 * once needed on other platforms. 521 */ 522 if (of_device_is_compatible(np, "st,spear600-gmac") || 523 of_device_is_compatible(np, "snps,dwmac-3.50a") || 524 of_device_is_compatible(np, "snps,dwmac-3.70a") || 525 of_device_is_compatible(np, "snps,dwmac")) { 526 /* Note that the max-frame-size parameter as defined in the 527 * ePAPR v1.1 spec is defined as max-frame-size, it's 528 * actually used as the IEEE definition of MAC Client 529 * data, or MTU. The ePAPR specification is confusing as 530 * the definition is max-frame-size, but usage examples 531 * are clearly MTUs 532 */ 533 of_property_read_u32(np, "max-frame-size", &plat->maxmtu); 534 of_property_read_u32(np, "snps,multicast-filter-bins", 535 &plat->multicast_filter_bins); 536 of_property_read_u32(np, "snps,perfect-filter-entries", 537 &plat->unicast_filter_entries); 538 plat->unicast_filter_entries = dwmac1000_validate_ucast_entries( 539 &pdev->dev, plat->unicast_filter_entries); 540 plat->multicast_filter_bins = dwmac1000_validate_mcast_bins( 541 &pdev->dev, plat->multicast_filter_bins); 542 plat->has_gmac = 1; 543 plat->pmt = 1; 544 } 545 546 if (of_device_is_compatible(np, "snps,dwmac-3.40a")) { 547 plat->has_gmac = 1; 548 plat->enh_desc = 1; 549 plat->tx_coe = 1; 550 plat->bugged_jumbo = 1; 551 plat->pmt = 1; 552 } 553 554 if (of_device_is_compatible(np, "snps,dwmac-4.00") || 555 of_device_is_compatible(np, "snps,dwmac-4.10a") || 556 of_device_is_compatible(np, "snps,dwmac-4.20a") || 557 of_device_is_compatible(np, "snps,dwmac-5.10a") || 558 of_device_is_compatible(np, "snps,dwmac-5.20")) { 559 plat->has_gmac4 = 1; 560 plat->has_gmac = 0; 561 plat->pmt = 1; 562 if (of_property_read_bool(np, "snps,tso")) 563 plat->flags |= STMMAC_FLAG_TSO_EN; 564 } 565 566 if (of_device_is_compatible(np, "snps,dwmac-3.610") || 567 of_device_is_compatible(np, "snps,dwmac-3.710")) { 568 plat->enh_desc = 1; 569 plat->bugged_jumbo = 1; 570 plat->force_sf_dma_mode = 1; 571 } 572 573 if (of_device_is_compatible(np, "snps,dwxgmac")) { 574 plat->has_xgmac = 1; 575 plat->pmt = 1; 576 if (of_property_read_bool(np, "snps,tso")) 577 plat->flags |= STMMAC_FLAG_TSO_EN; 578 } 579 580 dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg), 581 GFP_KERNEL); 582 if (!dma_cfg) { 583 stmmac_remove_config_dt(pdev, plat); 584 return ERR_PTR(-ENOMEM); 585 } 586 plat->dma_cfg = dma_cfg; 587 588 of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl); 589 if (!dma_cfg->pbl) 590 dma_cfg->pbl = DEFAULT_DMA_PBL; 591 of_property_read_u32(np, "snps,txpbl", &dma_cfg->txpbl); 592 of_property_read_u32(np, "snps,rxpbl", &dma_cfg->rxpbl); 593 dma_cfg->pblx8 = !of_property_read_bool(np, "snps,no-pbl-x8"); 594 595 dma_cfg->aal = of_property_read_bool(np, "snps,aal"); 596 dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst"); 597 dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst"); 598 599 plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode"); 600 if (plat->force_thresh_dma_mode && plat->force_sf_dma_mode) { 601 plat->force_sf_dma_mode = 0; 602 dev_warn(&pdev->dev, 603 "force_sf_dma_mode is ignored if force_thresh_dma_mode is set.\n"); 604 } 605 606 of_property_read_u32(np, "snps,ps-speed", &plat->mac_port_sel_speed); 607 608 plat->axi = stmmac_axi_setup(pdev); 609 610 rc = stmmac_mtl_setup(pdev, plat); 611 if (rc) { 612 stmmac_remove_config_dt(pdev, plat); 613 return ERR_PTR(rc); 614 } 615 616 /* clock setup */ 617 if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) { 618 plat->stmmac_clk = devm_clk_get(&pdev->dev, 619 STMMAC_RESOURCE_NAME); 620 if (IS_ERR(plat->stmmac_clk)) { 621 dev_warn(&pdev->dev, "Cannot get CSR clock\n"); 622 plat->stmmac_clk = NULL; 623 } 624 clk_prepare_enable(plat->stmmac_clk); 625 } 626 627 plat->pclk = devm_clk_get_optional(&pdev->dev, "pclk"); 628 if (IS_ERR(plat->pclk)) { 629 ret = plat->pclk; 630 goto error_pclk_get; 631 } 632 clk_prepare_enable(plat->pclk); 633 634 /* Fall-back to main clock in case of no PTP ref is passed */ 635 plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "ptp_ref"); 636 if (IS_ERR(plat->clk_ptp_ref)) { 637 plat->clk_ptp_rate = clk_get_rate(plat->stmmac_clk); 638 plat->clk_ptp_ref = NULL; 639 dev_info(&pdev->dev, "PTP uses main clock\n"); 640 } else { 641 plat->clk_ptp_rate = clk_get_rate(plat->clk_ptp_ref); 642 dev_dbg(&pdev->dev, "PTP rate %d\n", plat->clk_ptp_rate); 643 } 644 645 plat->stmmac_rst = devm_reset_control_get_optional(&pdev->dev, 646 STMMAC_RESOURCE_NAME); 647 if (IS_ERR(plat->stmmac_rst)) { 648 ret = plat->stmmac_rst; 649 goto error_hw_init; 650 } 651 652 plat->stmmac_ahb_rst = devm_reset_control_get_optional_shared( 653 &pdev->dev, "ahb"); 654 if (IS_ERR(plat->stmmac_ahb_rst)) { 655 ret = plat->stmmac_ahb_rst; 656 goto error_hw_init; 657 } 658 659 return plat; 660 661 error_hw_init: 662 clk_disable_unprepare(plat->pclk); 663 error_pclk_get: 664 clk_disable_unprepare(plat->stmmac_clk); 665 666 return ret; 667 } 668 669 static void devm_stmmac_remove_config_dt(void *data) 670 { 671 struct plat_stmmacenet_data *plat = data; 672 673 /* Platform data argument is unused */ 674 stmmac_remove_config_dt(NULL, plat); 675 } 676 677 /** 678 * devm_stmmac_probe_config_dt 679 * @pdev: platform_device structure 680 * @mac: MAC address to use 681 * Description: Devres variant of stmmac_probe_config_dt(). Does not require 682 * the user to call stmmac_remove_config_dt() at driver detach. 683 */ 684 struct plat_stmmacenet_data * 685 devm_stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) 686 { 687 struct plat_stmmacenet_data *plat; 688 int ret; 689 690 plat = stmmac_probe_config_dt(pdev, mac); 691 if (IS_ERR(plat)) 692 return plat; 693 694 ret = devm_add_action_or_reset(&pdev->dev, 695 devm_stmmac_remove_config_dt, plat); 696 if (ret) 697 return ERR_PTR(ret); 698 699 return plat; 700 } 701 #else 702 struct plat_stmmacenet_data * 703 devm_stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) 704 { 705 return ERR_PTR(-EINVAL); 706 } 707 #endif /* CONFIG_OF */ 708 EXPORT_SYMBOL_GPL(devm_stmmac_probe_config_dt); 709 710 int stmmac_get_platform_resources(struct platform_device *pdev, 711 struct stmmac_resources *stmmac_res) 712 { 713 memset(stmmac_res, 0, sizeof(*stmmac_res)); 714 715 /* Get IRQ information early to have an ability to ask for deferred 716 * probe if needed before we went too far with resource allocation. 717 */ 718 stmmac_res->irq = platform_get_irq_byname(pdev, "macirq"); 719 if (stmmac_res->irq < 0) 720 return stmmac_res->irq; 721 722 /* On some platforms e.g. SPEAr the wake up irq differs from the mac irq 723 * The external wake up irq can be passed through the platform code 724 * named as "eth_wake_irq" 725 * 726 * In case the wake up interrupt is not passed from the platform 727 * so the driver will continue to use the mac irq (ndev->irq) 728 */ 729 stmmac_res->wol_irq = 730 platform_get_irq_byname_optional(pdev, "eth_wake_irq"); 731 if (stmmac_res->wol_irq < 0) { 732 if (stmmac_res->wol_irq == -EPROBE_DEFER) 733 return -EPROBE_DEFER; 734 dev_info(&pdev->dev, "IRQ eth_wake_irq not found\n"); 735 stmmac_res->wol_irq = stmmac_res->irq; 736 } 737 738 stmmac_res->lpi_irq = 739 platform_get_irq_byname_optional(pdev, "eth_lpi"); 740 if (stmmac_res->lpi_irq < 0) { 741 if (stmmac_res->lpi_irq == -EPROBE_DEFER) 742 return -EPROBE_DEFER; 743 dev_info(&pdev->dev, "IRQ eth_lpi not found\n"); 744 } 745 746 stmmac_res->sfty_irq = 747 platform_get_irq_byname_optional(pdev, "sfty"); 748 if (stmmac_res->sfty_irq < 0) { 749 if (stmmac_res->sfty_irq == -EPROBE_DEFER) 750 return -EPROBE_DEFER; 751 dev_info(&pdev->dev, "IRQ sfty not found\n"); 752 } 753 754 stmmac_res->addr = devm_platform_ioremap_resource(pdev, 0); 755 756 return PTR_ERR_OR_ZERO(stmmac_res->addr); 757 } 758 EXPORT_SYMBOL_GPL(stmmac_get_platform_resources); 759 760 /** 761 * stmmac_pltfr_init 762 * @pdev: pointer to the platform device 763 * @plat: driver data platform structure 764 * Description: Call the platform's init callback (if any) and propagate 765 * the return value. 766 */ 767 static int stmmac_pltfr_init(struct platform_device *pdev, 768 struct plat_stmmacenet_data *plat) 769 { 770 int ret = 0; 771 772 if (plat->init) 773 ret = plat->init(pdev, plat->bsp_priv); 774 775 return ret; 776 } 777 778 /** 779 * stmmac_pltfr_exit 780 * @pdev: pointer to the platform device 781 * @plat: driver data platform structure 782 * Description: Call the platform's exit callback (if any). 783 */ 784 static void stmmac_pltfr_exit(struct platform_device *pdev, 785 struct plat_stmmacenet_data *plat) 786 { 787 if (plat->exit) 788 plat->exit(pdev, plat->bsp_priv); 789 } 790 791 /** 792 * stmmac_pltfr_probe 793 * @pdev: platform device pointer 794 * @plat: driver data platform structure 795 * @res: stmmac resources structure 796 * Description: This calls the platform's init() callback and probes the 797 * stmmac driver. 798 */ 799 int stmmac_pltfr_probe(struct platform_device *pdev, 800 struct plat_stmmacenet_data *plat, 801 struct stmmac_resources *res) 802 { 803 int ret; 804 805 ret = stmmac_pltfr_init(pdev, plat); 806 if (ret) 807 return ret; 808 809 ret = stmmac_dvr_probe(&pdev->dev, plat, res); 810 if (ret) { 811 stmmac_pltfr_exit(pdev, plat); 812 return ret; 813 } 814 815 return ret; 816 } 817 EXPORT_SYMBOL_GPL(stmmac_pltfr_probe); 818 819 static void devm_stmmac_pltfr_remove(void *data) 820 { 821 struct platform_device *pdev = data; 822 823 stmmac_pltfr_remove(pdev); 824 } 825 826 /** 827 * devm_stmmac_pltfr_probe 828 * @pdev: pointer to the platform device 829 * @plat: driver data platform structure 830 * @res: stmmac resources 831 * Description: Devres variant of stmmac_pltfr_probe(). Allows users to skip 832 * calling stmmac_pltfr_remove() on driver detach. 833 */ 834 int devm_stmmac_pltfr_probe(struct platform_device *pdev, 835 struct plat_stmmacenet_data *plat, 836 struct stmmac_resources *res) 837 { 838 int ret; 839 840 ret = stmmac_pltfr_probe(pdev, plat, res); 841 if (ret) 842 return ret; 843 844 return devm_add_action_or_reset(&pdev->dev, devm_stmmac_pltfr_remove, 845 pdev); 846 } 847 EXPORT_SYMBOL_GPL(devm_stmmac_pltfr_probe); 848 849 /** 850 * stmmac_pltfr_remove 851 * @pdev: pointer to the platform device 852 * Description: This undoes the effects of stmmac_pltfr_probe() by removing the 853 * driver and calling the platform's exit() callback. 854 */ 855 void stmmac_pltfr_remove(struct platform_device *pdev) 856 { 857 struct net_device *ndev = platform_get_drvdata(pdev); 858 struct stmmac_priv *priv = netdev_priv(ndev); 859 struct plat_stmmacenet_data *plat = priv->plat; 860 861 stmmac_dvr_remove(&pdev->dev); 862 stmmac_pltfr_exit(pdev, plat); 863 } 864 EXPORT_SYMBOL_GPL(stmmac_pltfr_remove); 865 866 /** 867 * stmmac_pltfr_suspend 868 * @dev: device pointer 869 * Description: this function is invoked when suspend the driver and it direcly 870 * call the main suspend function and then, if required, on some platform, it 871 * can call an exit helper. 872 */ 873 static int __maybe_unused stmmac_pltfr_suspend(struct device *dev) 874 { 875 int ret; 876 struct net_device *ndev = dev_get_drvdata(dev); 877 struct stmmac_priv *priv = netdev_priv(ndev); 878 struct platform_device *pdev = to_platform_device(dev); 879 880 ret = stmmac_suspend(dev); 881 stmmac_pltfr_exit(pdev, priv->plat); 882 883 return ret; 884 } 885 886 /** 887 * stmmac_pltfr_resume 888 * @dev: device pointer 889 * Description: this function is invoked when resume the driver before calling 890 * the main resume function, on some platforms, it can call own init helper 891 * if required. 892 */ 893 static int __maybe_unused stmmac_pltfr_resume(struct device *dev) 894 { 895 struct net_device *ndev = dev_get_drvdata(dev); 896 struct stmmac_priv *priv = netdev_priv(ndev); 897 struct platform_device *pdev = to_platform_device(dev); 898 int ret; 899 900 ret = stmmac_pltfr_init(pdev, priv->plat); 901 if (ret) 902 return ret; 903 904 return stmmac_resume(dev); 905 } 906 907 static int __maybe_unused stmmac_runtime_suspend(struct device *dev) 908 { 909 struct net_device *ndev = dev_get_drvdata(dev); 910 struct stmmac_priv *priv = netdev_priv(ndev); 911 912 stmmac_bus_clks_config(priv, false); 913 914 return 0; 915 } 916 917 static int __maybe_unused stmmac_runtime_resume(struct device *dev) 918 { 919 struct net_device *ndev = dev_get_drvdata(dev); 920 struct stmmac_priv *priv = netdev_priv(ndev); 921 922 return stmmac_bus_clks_config(priv, true); 923 } 924 925 static int __maybe_unused stmmac_pltfr_noirq_suspend(struct device *dev) 926 { 927 struct net_device *ndev = dev_get_drvdata(dev); 928 struct stmmac_priv *priv = netdev_priv(ndev); 929 int ret; 930 931 if (!netif_running(ndev)) 932 return 0; 933 934 if (!device_may_wakeup(priv->device) || !priv->plat->pmt) { 935 /* Disable clock in case of PWM is off */ 936 clk_disable_unprepare(priv->plat->clk_ptp_ref); 937 938 ret = pm_runtime_force_suspend(dev); 939 if (ret) 940 return ret; 941 } 942 943 return 0; 944 } 945 946 static int __maybe_unused stmmac_pltfr_noirq_resume(struct device *dev) 947 { 948 struct net_device *ndev = dev_get_drvdata(dev); 949 struct stmmac_priv *priv = netdev_priv(ndev); 950 int ret; 951 952 if (!netif_running(ndev)) 953 return 0; 954 955 if (!device_may_wakeup(priv->device) || !priv->plat->pmt) { 956 /* enable the clk previously disabled */ 957 ret = pm_runtime_force_resume(dev); 958 if (ret) 959 return ret; 960 961 ret = clk_prepare_enable(priv->plat->clk_ptp_ref); 962 if (ret < 0) { 963 netdev_warn(priv->dev, 964 "failed to enable PTP reference clock: %pe\n", 965 ERR_PTR(ret)); 966 return ret; 967 } 968 } 969 970 return 0; 971 } 972 973 const struct dev_pm_ops stmmac_pltfr_pm_ops = { 974 SET_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_suspend, stmmac_pltfr_resume) 975 SET_RUNTIME_PM_OPS(stmmac_runtime_suspend, stmmac_runtime_resume, NULL) 976 SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_noirq_suspend, stmmac_pltfr_noirq_resume) 977 }; 978 EXPORT_SYMBOL_GPL(stmmac_pltfr_pm_ops); 979 980 MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet platform support"); 981 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); 982 MODULE_LICENSE("GPL"); 983