1 /* 2 * Qualcomm Atheros IPQ806x GMAC glue layer 3 * 4 * Copyright (C) 2015 The Linux Foundation 5 * 6 * Permission to use, copy, modify, and/or distribute this software for any 7 * purpose with or without fee is hereby granted, provided that the above 8 * copyright notice and this permission notice appear in all copies. 9 * 10 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 11 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 12 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 13 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 14 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 15 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 16 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 17 */ 18 19 #include <linux/device.h> 20 #include <linux/platform_device.h> 21 #include <linux/phy.h> 22 #include <linux/regmap.h> 23 #include <linux/clk.h> 24 #include <linux/reset.h> 25 #include <linux/of_net.h> 26 #include <linux/mfd/syscon.h> 27 #include <linux/stmmac.h> 28 #include <linux/of_mdio.h> 29 #include <linux/module.h> 30 31 #include "stmmac_platform.h" 32 33 #define NSS_COMMON_CLK_GATE 0x8 34 #define NSS_COMMON_CLK_GATE_PTP_EN(x) BIT(0x10 + x) 35 #define NSS_COMMON_CLK_GATE_RGMII_RX_EN(x) BIT(0x9 + (x * 2)) 36 #define NSS_COMMON_CLK_GATE_RGMII_TX_EN(x) BIT(0x8 + (x * 2)) 37 #define NSS_COMMON_CLK_GATE_GMII_RX_EN(x) BIT(0x4 + x) 38 #define NSS_COMMON_CLK_GATE_GMII_TX_EN(x) BIT(0x0 + x) 39 40 #define NSS_COMMON_CLK_DIV0 0xC 41 #define NSS_COMMON_CLK_DIV_OFFSET(x) (x * 8) 42 #define NSS_COMMON_CLK_DIV_MASK 0x7f 43 44 #define NSS_COMMON_CLK_SRC_CTRL 0x14 45 #define NSS_COMMON_CLK_SRC_CTRL_OFFSET(x) (x) 46 /* Mode is coded on 1 bit but is different depending on the MAC ID: 47 * MAC0: QSGMII=0 RGMII=1 48 * MAC1: QSGMII=0 SGMII=0 RGMII=1 49 * MAC2 & MAC3: QSGMII=0 SGMII=1 50 */ 51 #define NSS_COMMON_CLK_SRC_CTRL_RGMII(x) 1 52 #define NSS_COMMON_CLK_SRC_CTRL_SGMII(x) ((x >= 2) ? 1 : 0) 53 54 #define NSS_COMMON_GMAC_CTL(x) (0x30 + (x * 4)) 55 #define NSS_COMMON_GMAC_CTL_CSYS_REQ BIT(19) 56 #define NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL BIT(16) 57 #define NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET 8 58 #define NSS_COMMON_GMAC_CTL_IFG_OFFSET 0 59 60 #define NSS_COMMON_CLK_DIV_RGMII_1000 1 61 #define NSS_COMMON_CLK_DIV_RGMII_100 9 62 #define NSS_COMMON_CLK_DIV_RGMII_10 99 63 #define NSS_COMMON_CLK_DIV_SGMII_1000 0 64 #define NSS_COMMON_CLK_DIV_SGMII_100 4 65 #define NSS_COMMON_CLK_DIV_SGMII_10 49 66 67 #define QSGMII_PCS_CAL_LCKDT_CTL 0x120 68 #define QSGMII_PCS_CAL_LCKDT_CTL_RST BIT(19) 69 70 /* Only GMAC1/2/3 support SGMII and their CTL register are not contiguous */ 71 #define QSGMII_PHY_SGMII_CTL(x) ((x == 1) ? 0x134 : \ 72 (0x13c + (4 * (x - 2)))) 73 #define QSGMII_PHY_CDR_EN BIT(0) 74 #define QSGMII_PHY_RX_FRONT_EN BIT(1) 75 #define QSGMII_PHY_RX_SIGNAL_DETECT_EN BIT(2) 76 #define QSGMII_PHY_TX_DRIVER_EN BIT(3) 77 #define QSGMII_PHY_QSGMII_EN BIT(7) 78 #define QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET 12 79 #define QSGMII_PHY_RX_DC_BIAS_OFFSET 18 80 #define QSGMII_PHY_RX_INPUT_EQU_OFFSET 20 81 #define QSGMII_PHY_CDR_PI_SLEW_OFFSET 22 82 #define QSGMII_PHY_TX_DRV_AMP_OFFSET 28 83 84 struct ipq806x_gmac { 85 struct platform_device *pdev; 86 struct regmap *nss_common; 87 struct regmap *qsgmii_csr; 88 uint32_t id; 89 struct clk *core_clk; 90 phy_interface_t phy_mode; 91 }; 92 93 static int get_clk_div_sgmii(struct ipq806x_gmac *gmac, unsigned int speed) 94 { 95 struct device *dev = &gmac->pdev->dev; 96 int div; 97 98 switch (speed) { 99 case SPEED_1000: 100 div = NSS_COMMON_CLK_DIV_SGMII_1000; 101 break; 102 103 case SPEED_100: 104 div = NSS_COMMON_CLK_DIV_SGMII_100; 105 break; 106 107 case SPEED_10: 108 div = NSS_COMMON_CLK_DIV_SGMII_10; 109 break; 110 111 default: 112 dev_err(dev, "Speed %dMbps not supported in SGMII\n", speed); 113 return -EINVAL; 114 } 115 116 return div; 117 } 118 119 static int get_clk_div_rgmii(struct ipq806x_gmac *gmac, unsigned int speed) 120 { 121 struct device *dev = &gmac->pdev->dev; 122 int div; 123 124 switch (speed) { 125 case SPEED_1000: 126 div = NSS_COMMON_CLK_DIV_RGMII_1000; 127 break; 128 129 case SPEED_100: 130 div = NSS_COMMON_CLK_DIV_RGMII_100; 131 break; 132 133 case SPEED_10: 134 div = NSS_COMMON_CLK_DIV_RGMII_10; 135 break; 136 137 default: 138 dev_err(dev, "Speed %dMbps not supported in RGMII\n", speed); 139 return -EINVAL; 140 } 141 142 return div; 143 } 144 145 static int ipq806x_gmac_set_speed(struct ipq806x_gmac *gmac, unsigned int speed) 146 { 147 uint32_t clk_bits, val; 148 int div; 149 150 switch (gmac->phy_mode) { 151 case PHY_INTERFACE_MODE_RGMII: 152 div = get_clk_div_rgmii(gmac, speed); 153 clk_bits = NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) | 154 NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id); 155 break; 156 157 case PHY_INTERFACE_MODE_SGMII: 158 div = get_clk_div_sgmii(gmac, speed); 159 clk_bits = NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) | 160 NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id); 161 break; 162 163 default: 164 dev_err(&gmac->pdev->dev, "Unsupported PHY mode: \"%s\"\n", 165 phy_modes(gmac->phy_mode)); 166 return -EINVAL; 167 } 168 169 /* Disable the clocks */ 170 regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val); 171 val &= ~clk_bits; 172 regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val); 173 174 /* Set the divider */ 175 regmap_read(gmac->nss_common, NSS_COMMON_CLK_DIV0, &val); 176 val &= ~(NSS_COMMON_CLK_DIV_MASK 177 << NSS_COMMON_CLK_DIV_OFFSET(gmac->id)); 178 val |= div << NSS_COMMON_CLK_DIV_OFFSET(gmac->id); 179 regmap_write(gmac->nss_common, NSS_COMMON_CLK_DIV0, val); 180 181 /* Enable the clock back */ 182 regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val); 183 val |= clk_bits; 184 regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val); 185 186 return 0; 187 } 188 189 static int ipq806x_gmac_of_parse(struct ipq806x_gmac *gmac) 190 { 191 struct device *dev = &gmac->pdev->dev; 192 int ret; 193 194 ret = of_get_phy_mode(dev->of_node, &gmac->phy_mode); 195 if (ret) { 196 dev_err(dev, "missing phy mode property\n"); 197 return -EINVAL; 198 } 199 200 if (of_property_read_u32(dev->of_node, "qcom,id", &gmac->id) < 0) { 201 dev_err(dev, "missing qcom id property\n"); 202 return -EINVAL; 203 } 204 205 /* The GMACs are called 1 to 4 in the documentation, but to simplify the 206 * code and keep it consistent with the Linux convention, we'll number 207 * them from 0 to 3 here. 208 */ 209 if (gmac->id > 3) { 210 dev_err(dev, "invalid gmac id\n"); 211 return -EINVAL; 212 } 213 214 gmac->core_clk = devm_clk_get(dev, "stmmaceth"); 215 if (IS_ERR(gmac->core_clk)) { 216 dev_err(dev, "missing stmmaceth clk property\n"); 217 return PTR_ERR(gmac->core_clk); 218 } 219 clk_set_rate(gmac->core_clk, 266000000); 220 221 /* Setup the register map for the nss common registers */ 222 gmac->nss_common = syscon_regmap_lookup_by_phandle(dev->of_node, 223 "qcom,nss-common"); 224 if (IS_ERR(gmac->nss_common)) { 225 dev_err(dev, "missing nss-common node\n"); 226 return PTR_ERR(gmac->nss_common); 227 } 228 229 /* Setup the register map for the qsgmii csr registers */ 230 gmac->qsgmii_csr = syscon_regmap_lookup_by_phandle(dev->of_node, 231 "qcom,qsgmii-csr"); 232 if (IS_ERR(gmac->qsgmii_csr)) 233 dev_err(dev, "missing qsgmii-csr node\n"); 234 235 return PTR_ERR_OR_ZERO(gmac->qsgmii_csr); 236 } 237 238 static void ipq806x_gmac_fix_mac_speed(void *priv, unsigned int speed) 239 { 240 struct ipq806x_gmac *gmac = priv; 241 242 ipq806x_gmac_set_speed(gmac, speed); 243 } 244 245 static int ipq806x_gmac_probe(struct platform_device *pdev) 246 { 247 struct plat_stmmacenet_data *plat_dat; 248 struct stmmac_resources stmmac_res; 249 struct device *dev = &pdev->dev; 250 struct ipq806x_gmac *gmac; 251 int val; 252 int err; 253 254 val = stmmac_get_platform_resources(pdev, &stmmac_res); 255 if (val) 256 return val; 257 258 plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); 259 if (IS_ERR(plat_dat)) 260 return PTR_ERR(plat_dat); 261 262 gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL); 263 if (!gmac) { 264 err = -ENOMEM; 265 goto err_remove_config_dt; 266 } 267 268 gmac->pdev = pdev; 269 270 err = ipq806x_gmac_of_parse(gmac); 271 if (err) { 272 dev_err(dev, "device tree parsing error\n"); 273 goto err_remove_config_dt; 274 } 275 276 regmap_write(gmac->qsgmii_csr, QSGMII_PCS_CAL_LCKDT_CTL, 277 QSGMII_PCS_CAL_LCKDT_CTL_RST); 278 279 /* Inter frame gap is set to 12 */ 280 val = 12 << NSS_COMMON_GMAC_CTL_IFG_OFFSET | 281 12 << NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET; 282 /* We also initiate an AXI low power exit request */ 283 val |= NSS_COMMON_GMAC_CTL_CSYS_REQ; 284 switch (gmac->phy_mode) { 285 case PHY_INTERFACE_MODE_RGMII: 286 val |= NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL; 287 break; 288 case PHY_INTERFACE_MODE_SGMII: 289 val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL; 290 break; 291 default: 292 dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n", 293 phy_modes(gmac->phy_mode)); 294 err = -EINVAL; 295 goto err_remove_config_dt; 296 } 297 regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val); 298 299 /* Configure the clock src according to the mode */ 300 regmap_read(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, &val); 301 val &= ~(1 << NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id)); 302 switch (gmac->phy_mode) { 303 case PHY_INTERFACE_MODE_RGMII: 304 val |= NSS_COMMON_CLK_SRC_CTRL_RGMII(gmac->id) << 305 NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id); 306 break; 307 case PHY_INTERFACE_MODE_SGMII: 308 val |= NSS_COMMON_CLK_SRC_CTRL_SGMII(gmac->id) << 309 NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id); 310 break; 311 default: 312 dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n", 313 phy_modes(gmac->phy_mode)); 314 err = -EINVAL; 315 goto err_remove_config_dt; 316 } 317 regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val); 318 319 /* Enable PTP clock */ 320 regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val); 321 val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id); 322 switch (gmac->phy_mode) { 323 case PHY_INTERFACE_MODE_RGMII: 324 val |= NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) | 325 NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id); 326 break; 327 case PHY_INTERFACE_MODE_SGMII: 328 val |= NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) | 329 NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id); 330 break; 331 default: 332 /* We don't get here; the switch above will have errored out */ 333 unreachable(); 334 } 335 regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val); 336 337 if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) { 338 regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id), 339 QSGMII_PHY_CDR_EN | 340 QSGMII_PHY_RX_FRONT_EN | 341 QSGMII_PHY_RX_SIGNAL_DETECT_EN | 342 QSGMII_PHY_TX_DRIVER_EN | 343 QSGMII_PHY_QSGMII_EN | 344 0x4ul << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET | 345 0x3ul << QSGMII_PHY_RX_DC_BIAS_OFFSET | 346 0x1ul << QSGMII_PHY_RX_INPUT_EQU_OFFSET | 347 0x2ul << QSGMII_PHY_CDR_PI_SLEW_OFFSET | 348 0xCul << QSGMII_PHY_TX_DRV_AMP_OFFSET); 349 } 350 351 plat_dat->has_gmac = true; 352 plat_dat->bsp_priv = gmac; 353 plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed; 354 plat_dat->multicast_filter_bins = 0; 355 356 err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); 357 if (err) 358 goto err_remove_config_dt; 359 360 return 0; 361 362 err_remove_config_dt: 363 stmmac_remove_config_dt(pdev, plat_dat); 364 365 return err; 366 } 367 368 static const struct of_device_id ipq806x_gmac_dwmac_match[] = { 369 { .compatible = "qcom,ipq806x-gmac" }, 370 { } 371 }; 372 MODULE_DEVICE_TABLE(of, ipq806x_gmac_dwmac_match); 373 374 static struct platform_driver ipq806x_gmac_dwmac_driver = { 375 .probe = ipq806x_gmac_probe, 376 .remove = stmmac_pltfr_remove, 377 .driver = { 378 .name = "ipq806x-gmac-dwmac", 379 .pm = &stmmac_pltfr_pm_ops, 380 .of_match_table = ipq806x_gmac_dwmac_match, 381 }, 382 }; 383 module_platform_driver(ipq806x_gmac_dwmac_driver); 384 385 MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>"); 386 MODULE_DESCRIPTION("Qualcomm Atheros IPQ806x DWMAC specific glue layer"); 387 MODULE_LICENSE("Dual BSD/GPL"); 388