1# SPDX-License-Identifier: GPL-2.0-only 2config STMMAC_ETH 3 tristate "STMicroelectronics Multi-Gigabit Ethernet driver" 4 depends on HAS_IOMEM && HAS_DMA 5 depends on PTP_1588_CLOCK_OPTIONAL 6 select MII 7 select PCS_XPCS 8 select PAGE_POOL 9 select PHYLINK 10 select CRC32 11 select RESET_CONTROLLER 12 help 13 This is the driver for the Ethernet IPs built around a 14 Synopsys IP Core. 15 16if STMMAC_ETH 17 18config STMMAC_SELFTESTS 19 bool "Support for STMMAC Selftests" 20 depends on INET 21 depends on STMMAC_ETH 22 default n 23 help 24 This adds support for STMMAC Selftests using ethtool. Enable this 25 feature if you are facing problems with your HW and submit the test 26 results to the netdev Mailing List. 27 28config STMMAC_PLATFORM 29 tristate "STMMAC Platform bus support" 30 depends on STMMAC_ETH 31 select MFD_SYSCON 32 default y 33 help 34 This selects the platform specific bus support for the stmmac driver. 35 This is the driver used on several SoCs: 36 STi, Allwinner, Amlogic Meson, Altera SOCFPGA. 37 38 If you have a controller with this interface, say Y or M here. 39 40 If unsure, say N. 41 42if STMMAC_PLATFORM 43 44config DWMAC_DWC_QOS_ETH 45 tristate "Support for snps,dwc-qos-ethernet.txt DT binding." 46 select CRC32 47 select MII 48 depends on OF && HAS_DMA 49 help 50 Support for chips using the snps,dwc-qos-ethernet.txt DT binding. 51 52config DWMAC_GENERIC 53 tristate "Generic driver for DWMAC" 54 default STMMAC_PLATFORM 55 help 56 Generic DWMAC driver for platforms that don't require any 57 platform specific code to function or is using platform 58 data for setup. 59 60config DWMAC_ANARION 61 tristate "Adaptrum Anarion GMAC support" 62 default ARC 63 depends on OF && (ARC || COMPILE_TEST) 64 help 65 Support for Adaptrum Anarion GMAC Ethernet controller. 66 67 This selects the Anarion SoC glue layer support for the stmmac driver. 68 69config DWMAC_INGENIC 70 tristate "Ingenic MAC support" 71 default MACH_INGENIC 72 depends on OF && HAS_IOMEM && (MACH_INGENIC || COMPILE_TEST) 73 select MFD_SYSCON 74 help 75 Support for ethernet controller on Ingenic SoCs. 76 77 This selects Ingenic SoCs glue layer support for the stmmac 78 device driver. This driver is used on for the Ingenic SoCs 79 MAC ethernet controller. 80 81config DWMAC_IPQ806X 82 tristate "QCA IPQ806x DWMAC support" 83 default ARCH_QCOM 84 depends on OF && (ARCH_QCOM || COMPILE_TEST) 85 select MFD_SYSCON 86 help 87 Support for QCA IPQ806X DWMAC Ethernet. 88 89 This selects the IPQ806x SoC glue layer support for the stmmac 90 device driver. This driver does not use any of the hardware 91 acceleration features available on this SoC. Network devices 92 will behave like standard non-accelerated ethernet interfaces. 93 94 Select the QCOM_SOCINFO config flag to enable specific dwmac 95 fixup based on the ipq806x SoC revision. 96 97config DWMAC_LPC18XX 98 tristate "NXP LPC18xx/43xx DWMAC support" 99 default ARCH_LPC18XX 100 depends on OF && (ARCH_LPC18XX || COMPILE_TEST) 101 select MFD_SYSCON 102 help 103 Support for NXP LPC18xx/43xx DWMAC Ethernet. 104 105config DWMAC_MEDIATEK 106 tristate "MediaTek MT27xx GMAC support" 107 depends on OF && (ARCH_MEDIATEK || COMPILE_TEST) 108 help 109 Support for MediaTek GMAC Ethernet controller. 110 111 This selects the MT2712 SoC support for the stmmac driver. 112 113config DWMAC_MESON 114 tristate "Amlogic Meson dwmac support" 115 default ARCH_MESON 116 depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST) 117 help 118 Support for Ethernet controller on Amlogic Meson SoCs. 119 120 This selects the Amlogic Meson SoC glue layer support for 121 the stmmac device driver. This driver is used for Meson6, 122 Meson8, Meson8b and GXBB SoCs. 123 124config DWMAC_QCOM_ETHQOS 125 tristate "Qualcomm ETHQOS support" 126 default ARCH_QCOM 127 depends on OF && (ARCH_QCOM || COMPILE_TEST) 128 help 129 Support for the Qualcomm ETHQOS core. 130 131 This selects the Qualcomm ETHQOS glue layer support for the 132 stmmac device driver. 133 134config DWMAC_ROCKCHIP 135 tristate "Rockchip dwmac support" 136 default ARCH_ROCKCHIP 137 depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST) 138 select MFD_SYSCON 139 help 140 Support for Ethernet controller on Rockchip RK3288 SoC. 141 142 This selects the Rockchip RK3288 SoC glue layer support for 143 the stmmac device driver. 144 145config DWMAC_RZN1 146 tristate "Renesas RZ/N1 dwmac support" 147 default ARCH_RZN1 148 depends on OF && (ARCH_RZN1 || COMPILE_TEST) 149 select PCS_RZN1_MIIC 150 help 151 Support for Ethernet controller on Renesas RZ/N1 SoC family. 152 153 This selects the Renesas RZ/N1 SoC glue layer support for 154 the stmmac device driver. This support can make use of a custom MII 155 converter PCS device. 156 157config DWMAC_SOCFPGA 158 tristate "SOCFPGA dwmac support" 159 default ARCH_INTEL_SOCFPGA 160 depends on OF && (ARCH_INTEL_SOCFPGA || COMPILE_TEST) 161 select MFD_SYSCON 162 select MDIO_REGMAP 163 select REGMAP_MMIO 164 select PCS_LYNX 165 help 166 Support for ethernet controller on Altera SOCFPGA 167 168 This selects the Altera SOCFPGA SoC glue layer support 169 for the stmmac device driver. This driver is used for 170 arria5 and cyclone5 FPGA SoCs. 171 172config DWMAC_STARFIVE 173 tristate "StarFive dwmac support" 174 depends on OF && (ARCH_STARFIVE || COMPILE_TEST) 175 select MFD_SYSCON 176 default m if ARCH_STARFIVE 177 help 178 Support for ethernet controllers on StarFive RISC-V SoCs 179 180 This selects the StarFive platform specific glue layer support 181 for the stmmac device driver. This driver is used for the 182 StarFive JH7100 and JH7110 ethernet controllers. 183 184config DWMAC_STI 185 tristate "STi GMAC support" 186 default ARCH_STI 187 depends on OF && (ARCH_STI || COMPILE_TEST) 188 select MFD_SYSCON 189 help 190 Support for ethernet controller on STi SOCs. 191 192 This selects STi SoC glue layer support for the stmmac 193 device driver. This driver is used on for the STi series 194 SOCs GMAC ethernet controller. 195 196config DWMAC_STM32 197 tristate "STM32 DWMAC support" 198 default ARCH_STM32 199 depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST) 200 select MFD_SYSCON 201 help 202 Support for ethernet controller on STM32 SOCs. 203 204 This selects STM32 SoC glue layer support for the stmmac 205 device driver. This driver is used on for the STM32 series 206 SOCs GMAC ethernet controller. 207 208config DWMAC_SUNXI 209 tristate "Allwinner GMAC support" 210 default ARCH_SUNXI 211 depends on OF && (ARCH_SUNXI || COMPILE_TEST) 212 help 213 Support for Allwinner A20/A31 GMAC ethernet controllers. 214 215 This selects Allwinner SoC glue layer support for the 216 stmmac device driver. This driver is used for A20/A31 217 GMAC ethernet controller. 218 219config DWMAC_SUN8I 220 tristate "Allwinner sun8i GMAC support" 221 default ARCH_SUNXI 222 depends on OF && (ARCH_SUNXI || COMPILE_TEST) 223 select MDIO_BUS_MUX 224 help 225 Support for Allwinner H3 A83T A64 EMAC ethernet controllers. 226 227 This selects Allwinner SoC glue layer support for the 228 stmmac device driver. This driver is used for H3/A83T/A64 229 EMAC ethernet controller. 230 231config DWMAC_IMX8 232 tristate "NXP IMX8 DWMAC support" 233 default ARCH_MXC 234 depends on OF && (ARCH_MXC || COMPILE_TEST) 235 select MFD_SYSCON 236 help 237 Support for ethernet controller on NXP i.MX8 SOCs. 238 239 This selects NXP SoC glue layer support for the stmmac 240 device driver. This driver is used for i.MX8 series like 241 iMX8MP/iMX8DXL GMAC ethernet controller. 242 243config DWMAC_INTEL_PLAT 244 tristate "Intel dwmac support" 245 depends on OF && COMMON_CLK 246 depends on STMMAC_ETH 247 help 248 Support for ethernet controllers on Intel SoCs 249 250 This selects the Intel platform specific glue layer support for 251 the stmmac device driver. This driver is used for the Intel Keem Bay 252 SoC. 253 254config DWMAC_LOONGSON1 255 tristate "Loongson1 GMAC support" 256 default MACH_LOONGSON32 257 depends on OF && (MACH_LOONGSON32 || COMPILE_TEST) 258 help 259 Support for ethernet controller on Loongson1 SoC. 260 261 This selects Loongson1 SoC glue layer support for the stmmac 262 device driver. This driver is used for Loongson1-based boards 263 like Loongson LS1B/LS1C. 264 265config DWMAC_TEGRA 266 tristate "NVIDIA Tegra MGBE support" 267 depends on ARCH_TEGRA || COMPILE_TEST 268 help 269 This selects the Multi-GigaBit Ethernet (MGBE) Controller that is 270 found on the NVIDIA Tegra SoC devices. This driver provides the glue 271 layer on top of the stmmac driver required for these NVIDIA Tegra SoC 272 devices. 273 274config DWMAC_VISCONTI 275 tristate "Toshiba Visconti DWMAC support" 276 default ARCH_VISCONTI 277 depends on OF && COMMON_CLK && (ARCH_VISCONTI || COMPILE_TEST) 278 help 279 Support for ethernet controller on Visconti SoCs. 280 281endif 282 283config DWMAC_INTEL 284 tristate "Intel GMAC support" 285 default X86 286 depends on X86 && STMMAC_ETH && PCI 287 depends on COMMON_CLK 288 help 289 This selects the Intel platform specific bus support for the 290 stmmac driver. This driver is used for Intel Quark/EHL/TGL. 291 292config DWMAC_LOONGSON 293 tristate "Loongson PCI DWMAC support" 294 default MACH_LOONGSON64 295 depends on (MACH_LOONGSON64 || COMPILE_TEST) && STMMAC_ETH && PCI 296 depends on COMMON_CLK 297 help 298 This selects the LOONGSON PCI bus support for the stmmac driver, 299 Support for ethernet controller on Loongson-2K1000 SoC and LS7A1000 bridge. 300 301config STMMAC_PCI 302 tristate "STMMAC PCI bus support" 303 depends on STMMAC_ETH && PCI 304 depends on COMMON_CLK 305 help 306 This selects the platform specific bus support for the stmmac driver. 307 This driver was tested on XLINX XC2V3000 FF1152AMT0221 308 D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit. 309 310 If you have a controller with this interface, say Y or M here. 311 312 If unsure, say N. 313endif 314