1config STMMAC_ETH 2 tristate "STMicroelectronics 10/100/1000/EQOS Ethernet driver" 3 depends on HAS_IOMEM && HAS_DMA 4 select MII 5 select PHYLIB 6 select CRC32 7 imply PTP_1588_CLOCK 8 select RESET_CONTROLLER 9 ---help--- 10 This is the driver for the Ethernet IPs built around a 11 Synopsys IP Core. 12 13if STMMAC_ETH 14 15config STMMAC_PLATFORM 16 tristate "STMMAC Platform bus support" 17 depends on STMMAC_ETH 18 select MFD_SYSCON 19 default y 20 ---help--- 21 This selects the platform specific bus support for the stmmac driver. 22 This is the driver used on several SoCs: 23 STi, Allwinner, Amlogic Meson, Altera SOCFPGA. 24 25 If you have a controller with this interface, say Y or M here. 26 27 If unsure, say N. 28 29if STMMAC_PLATFORM 30 31config DWMAC_DWC_QOS_ETH 32 tristate "Support for snps,dwc-qos-ethernet.txt DT binding." 33 select PHYLIB 34 select CRC32 35 select MII 36 depends on OF && HAS_DMA 37 help 38 Support for chips using the snps,dwc-qos-ethernet.txt DT binding. 39 40config DWMAC_GENERIC 41 tristate "Generic driver for DWMAC" 42 default STMMAC_PLATFORM 43 ---help--- 44 Generic DWMAC driver for platforms that don't require any 45 platform specific code to function or is using platform 46 data for setup. 47 48config DWMAC_IPQ806X 49 tristate "QCA IPQ806x DWMAC support" 50 default ARCH_QCOM 51 depends on OF && (ARCH_QCOM || COMPILE_TEST) 52 select MFD_SYSCON 53 help 54 Support for QCA IPQ806X DWMAC Ethernet. 55 56 This selects the IPQ806x SoC glue layer support for the stmmac 57 device driver. This driver does not use any of the hardware 58 acceleration features available on this SoC. Network devices 59 will behave like standard non-accelerated ethernet interfaces. 60 61config DWMAC_LPC18XX 62 tristate "NXP LPC18xx/43xx DWMAC support" 63 default ARCH_LPC18XX 64 depends on OF && (ARCH_LPC18XX || COMPILE_TEST) 65 select MFD_SYSCON 66 ---help--- 67 Support for NXP LPC18xx/43xx DWMAC Ethernet. 68 69config DWMAC_MESON 70 tristate "Amlogic Meson dwmac support" 71 default ARCH_MESON 72 depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST) 73 help 74 Support for Ethernet controller on Amlogic Meson SoCs. 75 76 This selects the Amlogic Meson SoC glue layer support for 77 the stmmac device driver. This driver is used for Meson6, 78 Meson8, Meson8b and GXBB SoCs. 79 80config DWMAC_OXNAS 81 tristate "Oxford Semiconductor OXNAS dwmac support" 82 default ARCH_OXNAS 83 depends on OF && COMMON_CLK && (ARCH_OXNAS || COMPILE_TEST) 84 select MFD_SYSCON 85 help 86 Support for Ethernet controller on Oxford Semiconductor OXNAS SoCs. 87 88 This selects the Oxford Semiconductor OXNASSoC glue layer support for 89 the stmmac device driver. This driver is used for OX820. 90 91config DWMAC_ROCKCHIP 92 tristate "Rockchip dwmac support" 93 default ARCH_ROCKCHIP 94 depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST) 95 select MFD_SYSCON 96 help 97 Support for Ethernet controller on Rockchip RK3288 SoC. 98 99 This selects the Rockchip RK3288 SoC glue layer support for 100 the stmmac device driver. 101 102config DWMAC_SOCFPGA 103 tristate "SOCFPGA dwmac support" 104 default ARCH_SOCFPGA 105 depends on OF && (ARCH_SOCFPGA || COMPILE_TEST) 106 select MFD_SYSCON 107 help 108 Support for ethernet controller on Altera SOCFPGA 109 110 This selects the Altera SOCFPGA SoC glue layer support 111 for the stmmac device driver. This driver is used for 112 arria5 and cyclone5 FPGA SoCs. 113 114config DWMAC_STI 115 tristate "STi GMAC support" 116 default ARCH_STI 117 depends on OF && (ARCH_STI || COMPILE_TEST) 118 select MFD_SYSCON 119 ---help--- 120 Support for ethernet controller on STi SOCs. 121 122 This selects STi SoC glue layer support for the stmmac 123 device driver. This driver is used on for the STi series 124 SOCs GMAC ethernet controller. 125 126config DWMAC_STM32 127 tristate "STM32 DWMAC support" 128 default ARCH_STM32 129 depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST) 130 select MFD_SYSCON 131 ---help--- 132 Support for ethernet controller on STM32 SOCs. 133 134 This selects STM32 SoC glue layer support for the stmmac 135 device driver. This driver is used on for the STM32 series 136 SOCs GMAC ethernet controller. 137 138config DWMAC_SUNXI 139 tristate "Allwinner GMAC support" 140 default ARCH_SUNXI 141 depends on OF && (ARCH_SUNXI || COMPILE_TEST) 142 ---help--- 143 Support for Allwinner A20/A31 GMAC ethernet controllers. 144 145 This selects Allwinner SoC glue layer support for the 146 stmmac device driver. This driver is used for A20/A31 147 GMAC ethernet controller. 148 149config DWMAC_SUN8I 150 tristate "Allwinner sun8i GMAC support" 151 default ARCH_SUNXI 152 depends on OF && (ARCH_SUNXI || COMPILE_TEST) 153 ---help--- 154 Support for Allwinner H3 A83T A64 EMAC ethernet controllers. 155 156 This selects Allwinner SoC glue layer support for the 157 stmmac device driver. This driver is used for H3/A83T/A64 158 EMAC ethernet controller. 159endif 160 161config STMMAC_PCI 162 tristate "STMMAC PCI bus support" 163 depends on STMMAC_ETH && PCI 164 ---help--- 165 This selects the platform specific bus support for the stmmac driver. 166 This driver was tested on XLINX XC2V3000 FF1152AMT0221 167 D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit. 168 169 If you have a controller with this interface, say Y or M here. 170 171 If unsure, say N. 172endif 173