1# SPDX-License-Identifier: GPL-2.0-only 2config STMMAC_ETH 3 tristate "STMicroelectronics Multi-Gigabit Ethernet driver" 4 depends on HAS_IOMEM && HAS_DMA 5 depends on PTP_1588_CLOCK_OPTIONAL 6 select MII 7 select PCS_XPCS 8 select PAGE_POOL 9 select PHYLINK 10 select CRC32 11 select RESET_CONTROLLER 12 help 13 This is the driver for the Ethernet IPs built around a 14 Synopsys IP Core. 15 16if STMMAC_ETH 17 18config STMMAC_SELFTESTS 19 bool "Support for STMMAC Selftests" 20 depends on INET 21 depends on STMMAC_ETH 22 default n 23 help 24 This adds support for STMMAC Selftests using ethtool. Enable this 25 feature if you are facing problems with your HW and submit the test 26 results to the netdev Mailing List. 27 28config STMMAC_PLATFORM 29 tristate "STMMAC Platform bus support" 30 depends on STMMAC_ETH 31 select MFD_SYSCON 32 default y 33 help 34 This selects the platform specific bus support for the stmmac driver. 35 This is the driver used on several SoCs: 36 STi, Allwinner, Amlogic Meson, Altera SOCFPGA. 37 38 If you have a controller with this interface, say Y or M here. 39 40 If unsure, say N. 41 42if STMMAC_PLATFORM 43 44config DWMAC_DWC_QOS_ETH 45 tristate "Support for snps,dwc-qos-ethernet.txt DT binding." 46 select CRC32 47 select MII 48 depends on OF && HAS_DMA 49 help 50 Support for chips using the snps,dwc-qos-ethernet.txt DT binding. 51 52config DWMAC_GENERIC 53 tristate "Generic driver for DWMAC" 54 default STMMAC_PLATFORM 55 help 56 Generic DWMAC driver for platforms that don't require any 57 platform specific code to function or is using platform 58 data for setup. 59 60config DWMAC_ANARION 61 tristate "Adaptrum Anarion GMAC support" 62 default ARC 63 depends on OF && (ARC || COMPILE_TEST) 64 help 65 Support for Adaptrum Anarion GMAC Ethernet controller. 66 67 This selects the Anarion SoC glue layer support for the stmmac driver. 68 69config DWMAC_INGENIC 70 tristate "Ingenic MAC support" 71 default MACH_INGENIC 72 depends on OF && HAS_IOMEM && (MACH_INGENIC || COMPILE_TEST) 73 select MFD_SYSCON 74 help 75 Support for ethernet controller on Ingenic SoCs. 76 77 This selects Ingenic SoCs glue layer support for the stmmac 78 device driver. This driver is used on for the Ingenic SoCs 79 MAC ethernet controller. 80 81config DWMAC_IPQ806X 82 tristate "QCA IPQ806x DWMAC support" 83 default ARCH_QCOM 84 depends on OF && (ARCH_QCOM || COMPILE_TEST) 85 select MFD_SYSCON 86 help 87 Support for QCA IPQ806X DWMAC Ethernet. 88 89 This selects the IPQ806x SoC glue layer support for the stmmac 90 device driver. This driver does not use any of the hardware 91 acceleration features available on this SoC. Network devices 92 will behave like standard non-accelerated ethernet interfaces. 93 94 Select the QCOM_SOCINFO config flag to enable specific dwmac 95 fixup based on the ipq806x SoC revision. 96 97config DWMAC_LPC18XX 98 tristate "NXP LPC18xx/43xx DWMAC support" 99 default ARCH_LPC18XX 100 depends on OF && (ARCH_LPC18XX || COMPILE_TEST) 101 select MFD_SYSCON 102 help 103 Support for NXP LPC18xx/43xx DWMAC Ethernet. 104 105config DWMAC_MEDIATEK 106 tristate "MediaTek MT27xx GMAC support" 107 depends on OF && (ARCH_MEDIATEK || COMPILE_TEST) 108 help 109 Support for MediaTek GMAC Ethernet controller. 110 111 This selects the MT2712 SoC support for the stmmac driver. 112 113config DWMAC_MESON 114 tristate "Amlogic Meson dwmac support" 115 default ARCH_MESON 116 depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST) 117 help 118 Support for Ethernet controller on Amlogic Meson SoCs. 119 120 This selects the Amlogic Meson SoC glue layer support for 121 the stmmac device driver. This driver is used for Meson6, 122 Meson8, Meson8b and GXBB SoCs. 123 124config DWMAC_OXNAS 125 tristate "Oxford Semiconductor OXNAS dwmac support" 126 default ARCH_OXNAS 127 depends on OF && COMMON_CLK && (ARCH_OXNAS || COMPILE_TEST) 128 select MFD_SYSCON 129 help 130 Support for Ethernet controller on Oxford Semiconductor OXNAS SoCs. 131 132 This selects the Oxford Semiconductor OXNASSoC glue layer support for 133 the stmmac device driver. This driver is used for OX820. 134 135config DWMAC_QCOM_ETHQOS 136 tristate "Qualcomm ETHQOS support" 137 default ARCH_QCOM 138 depends on OF && (ARCH_QCOM || COMPILE_TEST) 139 help 140 Support for the Qualcomm ETHQOS core. 141 142 This selects the Qualcomm ETHQOS glue layer support for the 143 stmmac device driver. 144 145config DWMAC_ROCKCHIP 146 tristate "Rockchip dwmac support" 147 default ARCH_ROCKCHIP 148 depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST) 149 select MFD_SYSCON 150 help 151 Support for Ethernet controller on Rockchip RK3288 SoC. 152 153 This selects the Rockchip RK3288 SoC glue layer support for 154 the stmmac device driver. 155 156config DWMAC_SOCFPGA 157 tristate "SOCFPGA dwmac support" 158 default ARCH_INTEL_SOCFPGA 159 depends on OF && (ARCH_INTEL_SOCFPGA || COMPILE_TEST) 160 select MFD_SYSCON 161 select MDIO_REGMAP 162 select REGMAP_MMIO 163 select PCS_LYNX 164 help 165 Support for ethernet controller on Altera SOCFPGA 166 167 This selects the Altera SOCFPGA SoC glue layer support 168 for the stmmac device driver. This driver is used for 169 arria5 and cyclone5 FPGA SoCs. 170 171config DWMAC_STARFIVE 172 tristate "StarFive dwmac support" 173 depends on OF && (ARCH_STARFIVE || COMPILE_TEST) 174 select MFD_SYSCON 175 default m if ARCH_STARFIVE 176 help 177 Support for ethernet controllers on StarFive RISC-V SoCs 178 179 This selects the StarFive platform specific glue layer support for 180 the stmmac device driver. This driver is used for StarFive JH7110 181 ethernet controller. 182 183config DWMAC_STI 184 tristate "STi GMAC support" 185 default ARCH_STI 186 depends on OF && (ARCH_STI || COMPILE_TEST) 187 select MFD_SYSCON 188 help 189 Support for ethernet controller on STi SOCs. 190 191 This selects STi SoC glue layer support for the stmmac 192 device driver. This driver is used on for the STi series 193 SOCs GMAC ethernet controller. 194 195config DWMAC_STM32 196 tristate "STM32 DWMAC support" 197 default ARCH_STM32 198 depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST) 199 select MFD_SYSCON 200 help 201 Support for ethernet controller on STM32 SOCs. 202 203 This selects STM32 SoC glue layer support for the stmmac 204 device driver. This driver is used on for the STM32 series 205 SOCs GMAC ethernet controller. 206 207config DWMAC_SUNXI 208 tristate "Allwinner GMAC support" 209 default ARCH_SUNXI 210 depends on OF && (ARCH_SUNXI || COMPILE_TEST) 211 help 212 Support for Allwinner A20/A31 GMAC ethernet controllers. 213 214 This selects Allwinner SoC glue layer support for the 215 stmmac device driver. This driver is used for A20/A31 216 GMAC ethernet controller. 217 218config DWMAC_SUN8I 219 tristate "Allwinner sun8i GMAC support" 220 default ARCH_SUNXI 221 depends on OF && (ARCH_SUNXI || COMPILE_TEST) 222 select MDIO_BUS_MUX 223 help 224 Support for Allwinner H3 A83T A64 EMAC ethernet controllers. 225 226 This selects Allwinner SoC glue layer support for the 227 stmmac device driver. This driver is used for H3/A83T/A64 228 EMAC ethernet controller. 229 230config DWMAC_IMX8 231 tristate "NXP IMX8 DWMAC support" 232 default ARCH_MXC 233 depends on OF && (ARCH_MXC || COMPILE_TEST) 234 select MFD_SYSCON 235 help 236 Support for ethernet controller on NXP i.MX8 SOCs. 237 238 This selects NXP SoC glue layer support for the stmmac 239 device driver. This driver is used for i.MX8 series like 240 iMX8MP/iMX8DXL GMAC ethernet controller. 241 242config DWMAC_INTEL_PLAT 243 tristate "Intel dwmac support" 244 depends on OF && COMMON_CLK 245 depends on STMMAC_ETH 246 help 247 Support for ethernet controllers on Intel SoCs 248 249 This selects the Intel platform specific glue layer support for 250 the stmmac device driver. This driver is used for the Intel Keem Bay 251 SoC. 252 253config DWMAC_TEGRA 254 tristate "NVIDIA Tegra MGBE support" 255 depends on ARCH_TEGRA || COMPILE_TEST 256 help 257 This selects the Multi-GigaBit Ethernet (MGBE) Controller that is 258 found on the NVIDIA Tegra SoC devices. This driver provides the glue 259 layer on top of the stmmac driver required for these NVIDIA Tegra SoC 260 devices. 261 262config DWMAC_VISCONTI 263 tristate "Toshiba Visconti DWMAC support" 264 default ARCH_VISCONTI 265 depends on OF && COMMON_CLK && (ARCH_VISCONTI || COMPILE_TEST) 266 help 267 Support for ethernet controller on Visconti SoCs. 268 269endif 270 271config DWMAC_INTEL 272 tristate "Intel GMAC support" 273 default X86 274 depends on X86 && STMMAC_ETH && PCI 275 depends on COMMON_CLK 276 help 277 This selects the Intel platform specific bus support for the 278 stmmac driver. This driver is used for Intel Quark/EHL/TGL. 279 280config DWMAC_LOONGSON 281 tristate "Loongson PCI DWMAC support" 282 default MACH_LOONGSON64 283 depends on STMMAC_ETH && PCI 284 depends on COMMON_CLK 285 help 286 This selects the LOONGSON PCI bus support for the stmmac driver, 287 Support for ethernet controller on Loongson-2K1000 SoC and LS7A1000 bridge. 288 289config STMMAC_PCI 290 tristate "STMMAC PCI bus support" 291 depends on STMMAC_ETH && PCI 292 depends on COMMON_CLK 293 help 294 This selects the platform specific bus support for the stmmac driver. 295 This driver was tested on XLINX XC2V3000 FF1152AMT0221 296 D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit. 297 298 If you have a controller with this interface, say Y or M here. 299 300 If unsure, say N. 301endif 302