1 /*************************************************************************** 2 * 3 * Copyright (C) 2004-2008 SMSC 4 * Copyright (C) 2005-2008 ARM 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License 8 * as published by the Free Software Foundation; either version 2 9 * of the License, or (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 19 * 20 *************************************************************************** 21 * Rewritten, heavily based on smsc911x simple driver by SMSC. 22 * Partly uses io macros from smc91x.c by Nicolas Pitre 23 * 24 * Supported devices: 25 * LAN9115, LAN9116, LAN9117, LAN9118 26 * LAN9215, LAN9216, LAN9217, LAN9218 27 * LAN9210, LAN9211 28 * LAN9220, LAN9221 29 * LAN89218 30 * 31 */ 32 33 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 34 35 #include <linux/crc32.h> 36 #include <linux/delay.h> 37 #include <linux/errno.h> 38 #include <linux/etherdevice.h> 39 #include <linux/ethtool.h> 40 #include <linux/init.h> 41 #include <linux/interrupt.h> 42 #include <linux/ioport.h> 43 #include <linux/kernel.h> 44 #include <linux/module.h> 45 #include <linux/netdevice.h> 46 #include <linux/platform_device.h> 47 #include <linux/regulator/consumer.h> 48 #include <linux/sched.h> 49 #include <linux/timer.h> 50 #include <linux/bug.h> 51 #include <linux/bitops.h> 52 #include <linux/irq.h> 53 #include <linux/io.h> 54 #include <linux/swab.h> 55 #include <linux/phy.h> 56 #include <linux/smsc911x.h> 57 #include <linux/device.h> 58 #include <linux/of.h> 59 #include <linux/of_device.h> 60 #include <linux/of_gpio.h> 61 #include <linux/of_net.h> 62 #include "smsc911x.h" 63 64 #define SMSC_CHIPNAME "smsc911x" 65 #define SMSC_MDIONAME "smsc911x-mdio" 66 #define SMSC_DRV_VERSION "2008-10-21" 67 68 MODULE_LICENSE("GPL"); 69 MODULE_VERSION(SMSC_DRV_VERSION); 70 MODULE_ALIAS("platform:smsc911x"); 71 72 #if USE_DEBUG > 0 73 static int debug = 16; 74 #else 75 static int debug = 3; 76 #endif 77 78 module_param(debug, int, 0); 79 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); 80 81 struct smsc911x_data; 82 83 struct smsc911x_ops { 84 u32 (*reg_read)(struct smsc911x_data *pdata, u32 reg); 85 void (*reg_write)(struct smsc911x_data *pdata, u32 reg, u32 val); 86 void (*rx_readfifo)(struct smsc911x_data *pdata, 87 unsigned int *buf, unsigned int wordcount); 88 void (*tx_writefifo)(struct smsc911x_data *pdata, 89 unsigned int *buf, unsigned int wordcount); 90 }; 91 92 #define SMSC911X_NUM_SUPPLIES 2 93 94 struct smsc911x_data { 95 void __iomem *ioaddr; 96 97 unsigned int idrev; 98 99 /* used to decide which workarounds apply */ 100 unsigned int generation; 101 102 /* device configuration (copied from platform_data during probe) */ 103 struct smsc911x_platform_config config; 104 105 /* This needs to be acquired before calling any of below: 106 * smsc911x_mac_read(), smsc911x_mac_write() 107 */ 108 spinlock_t mac_lock; 109 110 /* spinlock to ensure register accesses are serialised */ 111 spinlock_t dev_lock; 112 113 struct phy_device *phy_dev; 114 struct mii_bus *mii_bus; 115 int phy_irq[PHY_MAX_ADDR]; 116 unsigned int using_extphy; 117 int last_duplex; 118 int last_carrier; 119 120 u32 msg_enable; 121 unsigned int gpio_setting; 122 unsigned int gpio_orig_setting; 123 struct net_device *dev; 124 struct napi_struct napi; 125 126 unsigned int software_irq_signal; 127 128 #ifdef USE_PHY_WORK_AROUND 129 #define MIN_PACKET_SIZE (64) 130 char loopback_tx_pkt[MIN_PACKET_SIZE]; 131 char loopback_rx_pkt[MIN_PACKET_SIZE]; 132 unsigned int resetcount; 133 #endif 134 135 /* Members for Multicast filter workaround */ 136 unsigned int multicast_update_pending; 137 unsigned int set_bits_mask; 138 unsigned int clear_bits_mask; 139 unsigned int hashhi; 140 unsigned int hashlo; 141 142 /* register access functions */ 143 const struct smsc911x_ops *ops; 144 145 /* regulators */ 146 struct regulator_bulk_data supplies[SMSC911X_NUM_SUPPLIES]; 147 }; 148 149 /* Easy access to information */ 150 #define __smsc_shift(pdata, reg) ((reg) << ((pdata)->config.shift)) 151 152 static inline u32 __smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg) 153 { 154 if (pdata->config.flags & SMSC911X_USE_32BIT) 155 return readl(pdata->ioaddr + reg); 156 157 if (pdata->config.flags & SMSC911X_USE_16BIT) 158 return ((readw(pdata->ioaddr + reg) & 0xFFFF) | 159 ((readw(pdata->ioaddr + reg + 2) & 0xFFFF) << 16)); 160 161 BUG(); 162 return 0; 163 } 164 165 static inline u32 166 __smsc911x_reg_read_shift(struct smsc911x_data *pdata, u32 reg) 167 { 168 if (pdata->config.flags & SMSC911X_USE_32BIT) 169 return readl(pdata->ioaddr + __smsc_shift(pdata, reg)); 170 171 if (pdata->config.flags & SMSC911X_USE_16BIT) 172 return (readw(pdata->ioaddr + 173 __smsc_shift(pdata, reg)) & 0xFFFF) | 174 ((readw(pdata->ioaddr + 175 __smsc_shift(pdata, reg + 2)) & 0xFFFF) << 16); 176 177 BUG(); 178 return 0; 179 } 180 181 static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg) 182 { 183 u32 data; 184 unsigned long flags; 185 186 spin_lock_irqsave(&pdata->dev_lock, flags); 187 data = pdata->ops->reg_read(pdata, reg); 188 spin_unlock_irqrestore(&pdata->dev_lock, flags); 189 190 return data; 191 } 192 193 static inline void __smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg, 194 u32 val) 195 { 196 if (pdata->config.flags & SMSC911X_USE_32BIT) { 197 writel(val, pdata->ioaddr + reg); 198 return; 199 } 200 201 if (pdata->config.flags & SMSC911X_USE_16BIT) { 202 writew(val & 0xFFFF, pdata->ioaddr + reg); 203 writew((val >> 16) & 0xFFFF, pdata->ioaddr + reg + 2); 204 return; 205 } 206 207 BUG(); 208 } 209 210 static inline void 211 __smsc911x_reg_write_shift(struct smsc911x_data *pdata, u32 reg, u32 val) 212 { 213 if (pdata->config.flags & SMSC911X_USE_32BIT) { 214 writel(val, pdata->ioaddr + __smsc_shift(pdata, reg)); 215 return; 216 } 217 218 if (pdata->config.flags & SMSC911X_USE_16BIT) { 219 writew(val & 0xFFFF, 220 pdata->ioaddr + __smsc_shift(pdata, reg)); 221 writew((val >> 16) & 0xFFFF, 222 pdata->ioaddr + __smsc_shift(pdata, reg + 2)); 223 return; 224 } 225 226 BUG(); 227 } 228 229 static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg, 230 u32 val) 231 { 232 unsigned long flags; 233 234 spin_lock_irqsave(&pdata->dev_lock, flags); 235 pdata->ops->reg_write(pdata, reg, val); 236 spin_unlock_irqrestore(&pdata->dev_lock, flags); 237 } 238 239 /* Writes a packet to the TX_DATA_FIFO */ 240 static inline void 241 smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf, 242 unsigned int wordcount) 243 { 244 unsigned long flags; 245 246 spin_lock_irqsave(&pdata->dev_lock, flags); 247 248 if (pdata->config.flags & SMSC911X_SWAP_FIFO) { 249 while (wordcount--) 250 __smsc911x_reg_write(pdata, TX_DATA_FIFO, 251 swab32(*buf++)); 252 goto out; 253 } 254 255 if (pdata->config.flags & SMSC911X_USE_32BIT) { 256 iowrite32_rep(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount); 257 goto out; 258 } 259 260 if (pdata->config.flags & SMSC911X_USE_16BIT) { 261 while (wordcount--) 262 __smsc911x_reg_write(pdata, TX_DATA_FIFO, *buf++); 263 goto out; 264 } 265 266 BUG(); 267 out: 268 spin_unlock_irqrestore(&pdata->dev_lock, flags); 269 } 270 271 /* Writes a packet to the TX_DATA_FIFO - shifted version */ 272 static inline void 273 smsc911x_tx_writefifo_shift(struct smsc911x_data *pdata, unsigned int *buf, 274 unsigned int wordcount) 275 { 276 unsigned long flags; 277 278 spin_lock_irqsave(&pdata->dev_lock, flags); 279 280 if (pdata->config.flags & SMSC911X_SWAP_FIFO) { 281 while (wordcount--) 282 __smsc911x_reg_write_shift(pdata, TX_DATA_FIFO, 283 swab32(*buf++)); 284 goto out; 285 } 286 287 if (pdata->config.flags & SMSC911X_USE_32BIT) { 288 iowrite32_rep(pdata->ioaddr + __smsc_shift(pdata, 289 TX_DATA_FIFO), buf, wordcount); 290 goto out; 291 } 292 293 if (pdata->config.flags & SMSC911X_USE_16BIT) { 294 while (wordcount--) 295 __smsc911x_reg_write_shift(pdata, 296 TX_DATA_FIFO, *buf++); 297 goto out; 298 } 299 300 BUG(); 301 out: 302 spin_unlock_irqrestore(&pdata->dev_lock, flags); 303 } 304 305 /* Reads a packet out of the RX_DATA_FIFO */ 306 static inline void 307 smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf, 308 unsigned int wordcount) 309 { 310 unsigned long flags; 311 312 spin_lock_irqsave(&pdata->dev_lock, flags); 313 314 if (pdata->config.flags & SMSC911X_SWAP_FIFO) { 315 while (wordcount--) 316 *buf++ = swab32(__smsc911x_reg_read(pdata, 317 RX_DATA_FIFO)); 318 goto out; 319 } 320 321 if (pdata->config.flags & SMSC911X_USE_32BIT) { 322 ioread32_rep(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount); 323 goto out; 324 } 325 326 if (pdata->config.flags & SMSC911X_USE_16BIT) { 327 while (wordcount--) 328 *buf++ = __smsc911x_reg_read(pdata, RX_DATA_FIFO); 329 goto out; 330 } 331 332 BUG(); 333 out: 334 spin_unlock_irqrestore(&pdata->dev_lock, flags); 335 } 336 337 /* Reads a packet out of the RX_DATA_FIFO - shifted version */ 338 static inline void 339 smsc911x_rx_readfifo_shift(struct smsc911x_data *pdata, unsigned int *buf, 340 unsigned int wordcount) 341 { 342 unsigned long flags; 343 344 spin_lock_irqsave(&pdata->dev_lock, flags); 345 346 if (pdata->config.flags & SMSC911X_SWAP_FIFO) { 347 while (wordcount--) 348 *buf++ = swab32(__smsc911x_reg_read_shift(pdata, 349 RX_DATA_FIFO)); 350 goto out; 351 } 352 353 if (pdata->config.flags & SMSC911X_USE_32BIT) { 354 ioread32_rep(pdata->ioaddr + __smsc_shift(pdata, 355 RX_DATA_FIFO), buf, wordcount); 356 goto out; 357 } 358 359 if (pdata->config.flags & SMSC911X_USE_16BIT) { 360 while (wordcount--) 361 *buf++ = __smsc911x_reg_read_shift(pdata, 362 RX_DATA_FIFO); 363 goto out; 364 } 365 366 BUG(); 367 out: 368 spin_unlock_irqrestore(&pdata->dev_lock, flags); 369 } 370 371 /* 372 * enable resources, currently just regulators. 373 */ 374 static int smsc911x_enable_resources(struct platform_device *pdev) 375 { 376 struct net_device *ndev = platform_get_drvdata(pdev); 377 struct smsc911x_data *pdata = netdev_priv(ndev); 378 int ret = 0; 379 380 ret = regulator_bulk_enable(ARRAY_SIZE(pdata->supplies), 381 pdata->supplies); 382 if (ret) 383 netdev_err(ndev, "failed to enable regulators %d\n", 384 ret); 385 return ret; 386 } 387 388 /* 389 * disable resources, currently just regulators. 390 */ 391 static int smsc911x_disable_resources(struct platform_device *pdev) 392 { 393 struct net_device *ndev = platform_get_drvdata(pdev); 394 struct smsc911x_data *pdata = netdev_priv(ndev); 395 int ret = 0; 396 397 ret = regulator_bulk_disable(ARRAY_SIZE(pdata->supplies), 398 pdata->supplies); 399 return ret; 400 } 401 402 /* 403 * Request resources, currently just regulators. 404 * 405 * The SMSC911x has two power pins: vddvario and vdd33a, in designs where 406 * these are not always-on we need to request regulators to be turned on 407 * before we can try to access the device registers. 408 */ 409 static int smsc911x_request_resources(struct platform_device *pdev) 410 { 411 struct net_device *ndev = platform_get_drvdata(pdev); 412 struct smsc911x_data *pdata = netdev_priv(ndev); 413 int ret = 0; 414 415 /* Request regulators */ 416 pdata->supplies[0].supply = "vdd33a"; 417 pdata->supplies[1].supply = "vddvario"; 418 ret = regulator_bulk_get(&pdev->dev, 419 ARRAY_SIZE(pdata->supplies), 420 pdata->supplies); 421 if (ret) 422 netdev_err(ndev, "couldn't get regulators %d\n", 423 ret); 424 return ret; 425 } 426 427 /* 428 * Free resources, currently just regulators. 429 * 430 */ 431 static void smsc911x_free_resources(struct platform_device *pdev) 432 { 433 struct net_device *ndev = platform_get_drvdata(pdev); 434 struct smsc911x_data *pdata = netdev_priv(ndev); 435 436 /* Free regulators */ 437 regulator_bulk_free(ARRAY_SIZE(pdata->supplies), 438 pdata->supplies); 439 } 440 441 /* waits for MAC not busy, with timeout. Only called by smsc911x_mac_read 442 * and smsc911x_mac_write, so assumes mac_lock is held */ 443 static int smsc911x_mac_complete(struct smsc911x_data *pdata) 444 { 445 int i; 446 u32 val; 447 448 SMSC_ASSERT_MAC_LOCK(pdata); 449 450 for (i = 0; i < 40; i++) { 451 val = smsc911x_reg_read(pdata, MAC_CSR_CMD); 452 if (!(val & MAC_CSR_CMD_CSR_BUSY_)) 453 return 0; 454 } 455 SMSC_WARN(pdata, hw, "Timed out waiting for MAC not BUSY. " 456 "MAC_CSR_CMD: 0x%08X", val); 457 return -EIO; 458 } 459 460 /* Fetches a MAC register value. Assumes mac_lock is acquired */ 461 static u32 smsc911x_mac_read(struct smsc911x_data *pdata, unsigned int offset) 462 { 463 unsigned int temp; 464 465 SMSC_ASSERT_MAC_LOCK(pdata); 466 467 temp = smsc911x_reg_read(pdata, MAC_CSR_CMD); 468 if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) { 469 SMSC_WARN(pdata, hw, "MAC busy at entry"); 470 return 0xFFFFFFFF; 471 } 472 473 /* Send the MAC cmd */ 474 smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) | 475 MAC_CSR_CMD_CSR_BUSY_ | MAC_CSR_CMD_R_NOT_W_)); 476 477 /* Workaround for hardware read-after-write restriction */ 478 temp = smsc911x_reg_read(pdata, BYTE_TEST); 479 480 /* Wait for the read to complete */ 481 if (likely(smsc911x_mac_complete(pdata) == 0)) 482 return smsc911x_reg_read(pdata, MAC_CSR_DATA); 483 484 SMSC_WARN(pdata, hw, "MAC busy after read"); 485 return 0xFFFFFFFF; 486 } 487 488 /* Set a mac register, mac_lock must be acquired before calling */ 489 static void smsc911x_mac_write(struct smsc911x_data *pdata, 490 unsigned int offset, u32 val) 491 { 492 unsigned int temp; 493 494 SMSC_ASSERT_MAC_LOCK(pdata); 495 496 temp = smsc911x_reg_read(pdata, MAC_CSR_CMD); 497 if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) { 498 SMSC_WARN(pdata, hw, 499 "smsc911x_mac_write failed, MAC busy at entry"); 500 return; 501 } 502 503 /* Send data to write */ 504 smsc911x_reg_write(pdata, MAC_CSR_DATA, val); 505 506 /* Write the actual data */ 507 smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) | 508 MAC_CSR_CMD_CSR_BUSY_)); 509 510 /* Workaround for hardware read-after-write restriction */ 511 temp = smsc911x_reg_read(pdata, BYTE_TEST); 512 513 /* Wait for the write to complete */ 514 if (likely(smsc911x_mac_complete(pdata) == 0)) 515 return; 516 517 SMSC_WARN(pdata, hw, "smsc911x_mac_write failed, MAC busy after write"); 518 } 519 520 /* Get a phy register */ 521 static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx) 522 { 523 struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv; 524 unsigned long flags; 525 unsigned int addr; 526 int i, reg; 527 528 spin_lock_irqsave(&pdata->mac_lock, flags); 529 530 /* Confirm MII not busy */ 531 if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { 532 SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_read???"); 533 reg = -EIO; 534 goto out; 535 } 536 537 /* Set the address, index & direction (read from PHY) */ 538 addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6); 539 smsc911x_mac_write(pdata, MII_ACC, addr); 540 541 /* Wait for read to complete w/ timeout */ 542 for (i = 0; i < 100; i++) 543 if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { 544 reg = smsc911x_mac_read(pdata, MII_DATA); 545 goto out; 546 } 547 548 SMSC_WARN(pdata, hw, "Timed out waiting for MII read to finish"); 549 reg = -EIO; 550 551 out: 552 spin_unlock_irqrestore(&pdata->mac_lock, flags); 553 return reg; 554 } 555 556 /* Set a phy register */ 557 static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx, 558 u16 val) 559 { 560 struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv; 561 unsigned long flags; 562 unsigned int addr; 563 int i, reg; 564 565 spin_lock_irqsave(&pdata->mac_lock, flags); 566 567 /* Confirm MII not busy */ 568 if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { 569 SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_write???"); 570 reg = -EIO; 571 goto out; 572 } 573 574 /* Put the data to write in the MAC */ 575 smsc911x_mac_write(pdata, MII_DATA, val); 576 577 /* Set the address, index & direction (write to PHY) */ 578 addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) | 579 MII_ACC_MII_WRITE_; 580 smsc911x_mac_write(pdata, MII_ACC, addr); 581 582 /* Wait for write to complete w/ timeout */ 583 for (i = 0; i < 100; i++) 584 if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { 585 reg = 0; 586 goto out; 587 } 588 589 SMSC_WARN(pdata, hw, "Timed out waiting for MII write to finish"); 590 reg = -EIO; 591 592 out: 593 spin_unlock_irqrestore(&pdata->mac_lock, flags); 594 return reg; 595 } 596 597 /* Switch to external phy. Assumes tx and rx are stopped. */ 598 static void smsc911x_phy_enable_external(struct smsc911x_data *pdata) 599 { 600 unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG); 601 602 /* Disable phy clocks to the MAC */ 603 hwcfg &= (~HW_CFG_PHY_CLK_SEL_); 604 hwcfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_; 605 smsc911x_reg_write(pdata, HW_CFG, hwcfg); 606 udelay(10); /* Enough time for clocks to stop */ 607 608 /* Switch to external phy */ 609 hwcfg |= HW_CFG_EXT_PHY_EN_; 610 smsc911x_reg_write(pdata, HW_CFG, hwcfg); 611 612 /* Enable phy clocks to the MAC */ 613 hwcfg &= (~HW_CFG_PHY_CLK_SEL_); 614 hwcfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_; 615 smsc911x_reg_write(pdata, HW_CFG, hwcfg); 616 udelay(10); /* Enough time for clocks to restart */ 617 618 hwcfg |= HW_CFG_SMI_SEL_; 619 smsc911x_reg_write(pdata, HW_CFG, hwcfg); 620 } 621 622 /* Autodetects and enables external phy if present on supported chips. 623 * autodetection can be overridden by specifying SMSC911X_FORCE_INTERNAL_PHY 624 * or SMSC911X_FORCE_EXTERNAL_PHY in the platform_data flags. */ 625 static void smsc911x_phy_initialise_external(struct smsc911x_data *pdata) 626 { 627 unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG); 628 629 if (pdata->config.flags & SMSC911X_FORCE_INTERNAL_PHY) { 630 SMSC_TRACE(pdata, hw, "Forcing internal PHY"); 631 pdata->using_extphy = 0; 632 } else if (pdata->config.flags & SMSC911X_FORCE_EXTERNAL_PHY) { 633 SMSC_TRACE(pdata, hw, "Forcing external PHY"); 634 smsc911x_phy_enable_external(pdata); 635 pdata->using_extphy = 1; 636 } else if (hwcfg & HW_CFG_EXT_PHY_DET_) { 637 SMSC_TRACE(pdata, hw, 638 "HW_CFG EXT_PHY_DET set, using external PHY"); 639 smsc911x_phy_enable_external(pdata); 640 pdata->using_extphy = 1; 641 } else { 642 SMSC_TRACE(pdata, hw, 643 "HW_CFG EXT_PHY_DET clear, using internal PHY"); 644 pdata->using_extphy = 0; 645 } 646 } 647 648 /* Fetches a tx status out of the status fifo */ 649 static unsigned int smsc911x_tx_get_txstatus(struct smsc911x_data *pdata) 650 { 651 unsigned int result = 652 smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TSUSED_; 653 654 if (result != 0) 655 result = smsc911x_reg_read(pdata, TX_STATUS_FIFO); 656 657 return result; 658 } 659 660 /* Fetches the next rx status */ 661 static unsigned int smsc911x_rx_get_rxstatus(struct smsc911x_data *pdata) 662 { 663 unsigned int result = 664 smsc911x_reg_read(pdata, RX_FIFO_INF) & RX_FIFO_INF_RXSUSED_; 665 666 if (result != 0) 667 result = smsc911x_reg_read(pdata, RX_STATUS_FIFO); 668 669 return result; 670 } 671 672 #ifdef USE_PHY_WORK_AROUND 673 static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata) 674 { 675 unsigned int tries; 676 u32 wrsz; 677 u32 rdsz; 678 ulong bufp; 679 680 for (tries = 0; tries < 10; tries++) { 681 unsigned int txcmd_a; 682 unsigned int txcmd_b; 683 unsigned int status; 684 unsigned int pktlength; 685 unsigned int i; 686 687 /* Zero-out rx packet memory */ 688 memset(pdata->loopback_rx_pkt, 0, MIN_PACKET_SIZE); 689 690 /* Write tx packet to 118 */ 691 txcmd_a = (u32)((ulong)pdata->loopback_tx_pkt & 0x03) << 16; 692 txcmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_; 693 txcmd_a |= MIN_PACKET_SIZE; 694 695 txcmd_b = MIN_PACKET_SIZE << 16 | MIN_PACKET_SIZE; 696 697 smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_a); 698 smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_b); 699 700 bufp = (ulong)pdata->loopback_tx_pkt & (~0x3); 701 wrsz = MIN_PACKET_SIZE + 3; 702 wrsz += (u32)((ulong)pdata->loopback_tx_pkt & 0x3); 703 wrsz >>= 2; 704 705 pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz); 706 707 /* Wait till transmit is done */ 708 i = 60; 709 do { 710 udelay(5); 711 status = smsc911x_tx_get_txstatus(pdata); 712 } while ((i--) && (!status)); 713 714 if (!status) { 715 SMSC_WARN(pdata, hw, 716 "Failed to transmit during loopback test"); 717 continue; 718 } 719 if (status & TX_STS_ES_) { 720 SMSC_WARN(pdata, hw, 721 "Transmit encountered errors during loopback test"); 722 continue; 723 } 724 725 /* Wait till receive is done */ 726 i = 60; 727 do { 728 udelay(5); 729 status = smsc911x_rx_get_rxstatus(pdata); 730 } while ((i--) && (!status)); 731 732 if (!status) { 733 SMSC_WARN(pdata, hw, 734 "Failed to receive during loopback test"); 735 continue; 736 } 737 if (status & RX_STS_ES_) { 738 SMSC_WARN(pdata, hw, 739 "Receive encountered errors during loopback test"); 740 continue; 741 } 742 743 pktlength = ((status & 0x3FFF0000UL) >> 16); 744 bufp = (ulong)pdata->loopback_rx_pkt; 745 rdsz = pktlength + 3; 746 rdsz += (u32)((ulong)pdata->loopback_rx_pkt & 0x3); 747 rdsz >>= 2; 748 749 pdata->ops->rx_readfifo(pdata, (unsigned int *)bufp, rdsz); 750 751 if (pktlength != (MIN_PACKET_SIZE + 4)) { 752 SMSC_WARN(pdata, hw, "Unexpected packet size " 753 "during loop back test, size=%d, will retry", 754 pktlength); 755 } else { 756 unsigned int j; 757 int mismatch = 0; 758 for (j = 0; j < MIN_PACKET_SIZE; j++) { 759 if (pdata->loopback_tx_pkt[j] 760 != pdata->loopback_rx_pkt[j]) { 761 mismatch = 1; 762 break; 763 } 764 } 765 if (!mismatch) { 766 SMSC_TRACE(pdata, hw, "Successfully verified " 767 "loopback packet"); 768 return 0; 769 } else { 770 SMSC_WARN(pdata, hw, "Data mismatch " 771 "during loop back test, will retry"); 772 } 773 } 774 } 775 776 return -EIO; 777 } 778 779 static int smsc911x_phy_reset(struct smsc911x_data *pdata) 780 { 781 struct phy_device *phy_dev = pdata->phy_dev; 782 unsigned int temp; 783 unsigned int i = 100000; 784 785 BUG_ON(!phy_dev); 786 BUG_ON(!phy_dev->bus); 787 788 SMSC_TRACE(pdata, hw, "Performing PHY BCR Reset"); 789 smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, BMCR_RESET); 790 do { 791 msleep(1); 792 temp = smsc911x_mii_read(phy_dev->bus, phy_dev->addr, 793 MII_BMCR); 794 } while ((i--) && (temp & BMCR_RESET)); 795 796 if (temp & BMCR_RESET) { 797 SMSC_WARN(pdata, hw, "PHY reset failed to complete"); 798 return -EIO; 799 } 800 /* Extra delay required because the phy may not be completed with 801 * its reset when BMCR_RESET is cleared. Specs say 256 uS is 802 * enough delay but using 1ms here to be safe */ 803 msleep(1); 804 805 return 0; 806 } 807 808 static int smsc911x_phy_loopbacktest(struct net_device *dev) 809 { 810 struct smsc911x_data *pdata = netdev_priv(dev); 811 struct phy_device *phy_dev = pdata->phy_dev; 812 int result = -EIO; 813 unsigned int i, val; 814 unsigned long flags; 815 816 /* Initialise tx packet using broadcast destination address */ 817 memset(pdata->loopback_tx_pkt, 0xff, ETH_ALEN); 818 819 /* Use incrementing source address */ 820 for (i = 6; i < 12; i++) 821 pdata->loopback_tx_pkt[i] = (char)i; 822 823 /* Set length type field */ 824 pdata->loopback_tx_pkt[12] = 0x00; 825 pdata->loopback_tx_pkt[13] = 0x00; 826 827 for (i = 14; i < MIN_PACKET_SIZE; i++) 828 pdata->loopback_tx_pkt[i] = (char)i; 829 830 val = smsc911x_reg_read(pdata, HW_CFG); 831 val &= HW_CFG_TX_FIF_SZ_; 832 val |= HW_CFG_SF_; 833 smsc911x_reg_write(pdata, HW_CFG, val); 834 835 smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_); 836 smsc911x_reg_write(pdata, RX_CFG, 837 (u32)((ulong)pdata->loopback_rx_pkt & 0x03) << 8); 838 839 for (i = 0; i < 10; i++) { 840 /* Set PHY to 10/FD, no ANEG, and loopback mode */ 841 smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, 842 BMCR_LOOPBACK | BMCR_FULLDPLX); 843 844 /* Enable MAC tx/rx, FD */ 845 spin_lock_irqsave(&pdata->mac_lock, flags); 846 smsc911x_mac_write(pdata, MAC_CR, MAC_CR_FDPX_ 847 | MAC_CR_TXEN_ | MAC_CR_RXEN_); 848 spin_unlock_irqrestore(&pdata->mac_lock, flags); 849 850 if (smsc911x_phy_check_loopbackpkt(pdata) == 0) { 851 result = 0; 852 break; 853 } 854 pdata->resetcount++; 855 856 /* Disable MAC rx */ 857 spin_lock_irqsave(&pdata->mac_lock, flags); 858 smsc911x_mac_write(pdata, MAC_CR, 0); 859 spin_unlock_irqrestore(&pdata->mac_lock, flags); 860 861 smsc911x_phy_reset(pdata); 862 } 863 864 /* Disable MAC */ 865 spin_lock_irqsave(&pdata->mac_lock, flags); 866 smsc911x_mac_write(pdata, MAC_CR, 0); 867 spin_unlock_irqrestore(&pdata->mac_lock, flags); 868 869 /* Cancel PHY loopback mode */ 870 smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, 0); 871 872 smsc911x_reg_write(pdata, TX_CFG, 0); 873 smsc911x_reg_write(pdata, RX_CFG, 0); 874 875 return result; 876 } 877 #endif /* USE_PHY_WORK_AROUND */ 878 879 static void smsc911x_phy_update_flowcontrol(struct smsc911x_data *pdata) 880 { 881 struct phy_device *phy_dev = pdata->phy_dev; 882 u32 afc = smsc911x_reg_read(pdata, AFC_CFG); 883 u32 flow; 884 unsigned long flags; 885 886 if (phy_dev->duplex == DUPLEX_FULL) { 887 u16 lcladv = phy_read(phy_dev, MII_ADVERTISE); 888 u16 rmtadv = phy_read(phy_dev, MII_LPA); 889 u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); 890 891 if (cap & FLOW_CTRL_RX) 892 flow = 0xFFFF0002; 893 else 894 flow = 0; 895 896 if (cap & FLOW_CTRL_TX) 897 afc |= 0xF; 898 else 899 afc &= ~0xF; 900 901 SMSC_TRACE(pdata, hw, "rx pause %s, tx pause %s", 902 (cap & FLOW_CTRL_RX ? "enabled" : "disabled"), 903 (cap & FLOW_CTRL_TX ? "enabled" : "disabled")); 904 } else { 905 SMSC_TRACE(pdata, hw, "half duplex"); 906 flow = 0; 907 afc |= 0xF; 908 } 909 910 spin_lock_irqsave(&pdata->mac_lock, flags); 911 smsc911x_mac_write(pdata, FLOW, flow); 912 spin_unlock_irqrestore(&pdata->mac_lock, flags); 913 914 smsc911x_reg_write(pdata, AFC_CFG, afc); 915 } 916 917 /* Update link mode if anything has changed. Called periodically when the 918 * PHY is in polling mode, even if nothing has changed. */ 919 static void smsc911x_phy_adjust_link(struct net_device *dev) 920 { 921 struct smsc911x_data *pdata = netdev_priv(dev); 922 struct phy_device *phy_dev = pdata->phy_dev; 923 unsigned long flags; 924 int carrier; 925 926 if (phy_dev->duplex != pdata->last_duplex) { 927 unsigned int mac_cr; 928 SMSC_TRACE(pdata, hw, "duplex state has changed"); 929 930 spin_lock_irqsave(&pdata->mac_lock, flags); 931 mac_cr = smsc911x_mac_read(pdata, MAC_CR); 932 if (phy_dev->duplex) { 933 SMSC_TRACE(pdata, hw, 934 "configuring for full duplex mode"); 935 mac_cr |= MAC_CR_FDPX_; 936 } else { 937 SMSC_TRACE(pdata, hw, 938 "configuring for half duplex mode"); 939 mac_cr &= ~MAC_CR_FDPX_; 940 } 941 smsc911x_mac_write(pdata, MAC_CR, mac_cr); 942 spin_unlock_irqrestore(&pdata->mac_lock, flags); 943 944 smsc911x_phy_update_flowcontrol(pdata); 945 pdata->last_duplex = phy_dev->duplex; 946 } 947 948 carrier = netif_carrier_ok(dev); 949 if (carrier != pdata->last_carrier) { 950 SMSC_TRACE(pdata, hw, "carrier state has changed"); 951 if (carrier) { 952 SMSC_TRACE(pdata, hw, "configuring for carrier OK"); 953 if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) && 954 (!pdata->using_extphy)) { 955 /* Restore original GPIO configuration */ 956 pdata->gpio_setting = pdata->gpio_orig_setting; 957 smsc911x_reg_write(pdata, GPIO_CFG, 958 pdata->gpio_setting); 959 } 960 } else { 961 SMSC_TRACE(pdata, hw, "configuring for no carrier"); 962 /* Check global setting that LED1 963 * usage is 10/100 indicator */ 964 pdata->gpio_setting = smsc911x_reg_read(pdata, 965 GPIO_CFG); 966 if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) && 967 (!pdata->using_extphy)) { 968 /* Force 10/100 LED off, after saving 969 * original GPIO configuration */ 970 pdata->gpio_orig_setting = pdata->gpio_setting; 971 972 pdata->gpio_setting &= ~GPIO_CFG_LED1_EN_; 973 pdata->gpio_setting |= (GPIO_CFG_GPIOBUF0_ 974 | GPIO_CFG_GPIODIR0_ 975 | GPIO_CFG_GPIOD0_); 976 smsc911x_reg_write(pdata, GPIO_CFG, 977 pdata->gpio_setting); 978 } 979 } 980 pdata->last_carrier = carrier; 981 } 982 } 983 984 static int smsc911x_mii_probe(struct net_device *dev) 985 { 986 struct smsc911x_data *pdata = netdev_priv(dev); 987 struct phy_device *phydev = NULL; 988 int ret; 989 990 /* find the first phy */ 991 phydev = phy_find_first(pdata->mii_bus); 992 if (!phydev) { 993 netdev_err(dev, "no PHY found\n"); 994 return -ENODEV; 995 } 996 997 SMSC_TRACE(pdata, probe, "PHY: addr %d, phy_id 0x%08X", 998 phydev->addr, phydev->phy_id); 999 1000 ret = phy_connect_direct(dev, phydev, 1001 &smsc911x_phy_adjust_link, 0, 1002 pdata->config.phy_interface); 1003 1004 if (ret) { 1005 netdev_err(dev, "Could not attach to PHY\n"); 1006 return ret; 1007 } 1008 1009 netdev_info(dev, 1010 "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", 1011 phydev->drv->name, dev_name(&phydev->dev), phydev->irq); 1012 1013 /* mask with MAC supported features */ 1014 phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause | 1015 SUPPORTED_Asym_Pause); 1016 phydev->advertising = phydev->supported; 1017 1018 pdata->phy_dev = phydev; 1019 pdata->last_duplex = -1; 1020 pdata->last_carrier = -1; 1021 1022 #ifdef USE_PHY_WORK_AROUND 1023 if (smsc911x_phy_loopbacktest(dev) < 0) { 1024 SMSC_WARN(pdata, hw, "Failed Loop Back Test"); 1025 return -ENODEV; 1026 } 1027 SMSC_TRACE(pdata, hw, "Passed Loop Back Test"); 1028 #endif /* USE_PHY_WORK_AROUND */ 1029 1030 SMSC_TRACE(pdata, hw, "phy initialised successfully"); 1031 return 0; 1032 } 1033 1034 static int smsc911x_mii_init(struct platform_device *pdev, 1035 struct net_device *dev) 1036 { 1037 struct smsc911x_data *pdata = netdev_priv(dev); 1038 int err = -ENXIO, i; 1039 1040 pdata->mii_bus = mdiobus_alloc(); 1041 if (!pdata->mii_bus) { 1042 err = -ENOMEM; 1043 goto err_out_1; 1044 } 1045 1046 pdata->mii_bus->name = SMSC_MDIONAME; 1047 snprintf(pdata->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", 1048 pdev->name, pdev->id); 1049 pdata->mii_bus->priv = pdata; 1050 pdata->mii_bus->read = smsc911x_mii_read; 1051 pdata->mii_bus->write = smsc911x_mii_write; 1052 pdata->mii_bus->irq = pdata->phy_irq; 1053 for (i = 0; i < PHY_MAX_ADDR; ++i) 1054 pdata->mii_bus->irq[i] = PHY_POLL; 1055 1056 pdata->mii_bus->parent = &pdev->dev; 1057 1058 switch (pdata->idrev & 0xFFFF0000) { 1059 case 0x01170000: 1060 case 0x01150000: 1061 case 0x117A0000: 1062 case 0x115A0000: 1063 /* External PHY supported, try to autodetect */ 1064 smsc911x_phy_initialise_external(pdata); 1065 break; 1066 default: 1067 SMSC_TRACE(pdata, hw, "External PHY is not supported, " 1068 "using internal PHY"); 1069 pdata->using_extphy = 0; 1070 break; 1071 } 1072 1073 if (!pdata->using_extphy) { 1074 /* Mask all PHYs except ID 1 (internal) */ 1075 pdata->mii_bus->phy_mask = ~(1 << 1); 1076 } 1077 1078 if (mdiobus_register(pdata->mii_bus)) { 1079 SMSC_WARN(pdata, probe, "Error registering mii bus"); 1080 goto err_out_free_bus_2; 1081 } 1082 1083 if (smsc911x_mii_probe(dev) < 0) { 1084 SMSC_WARN(pdata, probe, "Error registering mii bus"); 1085 goto err_out_unregister_bus_3; 1086 } 1087 1088 return 0; 1089 1090 err_out_unregister_bus_3: 1091 mdiobus_unregister(pdata->mii_bus); 1092 err_out_free_bus_2: 1093 mdiobus_free(pdata->mii_bus); 1094 err_out_1: 1095 return err; 1096 } 1097 1098 /* Gets the number of tx statuses in the fifo */ 1099 static unsigned int smsc911x_tx_get_txstatcount(struct smsc911x_data *pdata) 1100 { 1101 return (smsc911x_reg_read(pdata, TX_FIFO_INF) 1102 & TX_FIFO_INF_TSUSED_) >> 16; 1103 } 1104 1105 /* Reads tx statuses and increments counters where necessary */ 1106 static void smsc911x_tx_update_txcounters(struct net_device *dev) 1107 { 1108 struct smsc911x_data *pdata = netdev_priv(dev); 1109 unsigned int tx_stat; 1110 1111 while ((tx_stat = smsc911x_tx_get_txstatus(pdata)) != 0) { 1112 if (unlikely(tx_stat & 0x80000000)) { 1113 /* In this driver the packet tag is used as the packet 1114 * length. Since a packet length can never reach the 1115 * size of 0x8000, this bit is reserved. It is worth 1116 * noting that the "reserved bit" in the warning above 1117 * does not reference a hardware defined reserved bit 1118 * but rather a driver defined one. 1119 */ 1120 SMSC_WARN(pdata, hw, "Packet tag reserved bit is high"); 1121 } else { 1122 if (unlikely(tx_stat & TX_STS_ES_)) { 1123 dev->stats.tx_errors++; 1124 } else { 1125 dev->stats.tx_packets++; 1126 dev->stats.tx_bytes += (tx_stat >> 16); 1127 } 1128 if (unlikely(tx_stat & TX_STS_EXCESS_COL_)) { 1129 dev->stats.collisions += 16; 1130 dev->stats.tx_aborted_errors += 1; 1131 } else { 1132 dev->stats.collisions += 1133 ((tx_stat >> 3) & 0xF); 1134 } 1135 if (unlikely(tx_stat & TX_STS_LOST_CARRIER_)) 1136 dev->stats.tx_carrier_errors += 1; 1137 if (unlikely(tx_stat & TX_STS_LATE_COL_)) { 1138 dev->stats.collisions++; 1139 dev->stats.tx_aborted_errors++; 1140 } 1141 } 1142 } 1143 } 1144 1145 /* Increments the Rx error counters */ 1146 static void 1147 smsc911x_rx_counterrors(struct net_device *dev, unsigned int rxstat) 1148 { 1149 int crc_err = 0; 1150 1151 if (unlikely(rxstat & RX_STS_ES_)) { 1152 dev->stats.rx_errors++; 1153 if (unlikely(rxstat & RX_STS_CRC_ERR_)) { 1154 dev->stats.rx_crc_errors++; 1155 crc_err = 1; 1156 } 1157 } 1158 if (likely(!crc_err)) { 1159 if (unlikely((rxstat & RX_STS_FRAME_TYPE_) && 1160 (rxstat & RX_STS_LENGTH_ERR_))) 1161 dev->stats.rx_length_errors++; 1162 if (rxstat & RX_STS_MCAST_) 1163 dev->stats.multicast++; 1164 } 1165 } 1166 1167 /* Quickly dumps bad packets */ 1168 static void 1169 smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktwords) 1170 { 1171 if (likely(pktwords >= 4)) { 1172 unsigned int timeout = 500; 1173 unsigned int val; 1174 smsc911x_reg_write(pdata, RX_DP_CTRL, RX_DP_CTRL_RX_FFWD_); 1175 do { 1176 udelay(1); 1177 val = smsc911x_reg_read(pdata, RX_DP_CTRL); 1178 } while ((val & RX_DP_CTRL_RX_FFWD_) && --timeout); 1179 1180 if (unlikely(timeout == 0)) 1181 SMSC_WARN(pdata, hw, "Timed out waiting for " 1182 "RX FFWD to finish, RX_DP_CTRL: 0x%08X", val); 1183 } else { 1184 unsigned int temp; 1185 while (pktwords--) 1186 temp = smsc911x_reg_read(pdata, RX_DATA_FIFO); 1187 } 1188 } 1189 1190 /* NAPI poll function */ 1191 static int smsc911x_poll(struct napi_struct *napi, int budget) 1192 { 1193 struct smsc911x_data *pdata = 1194 container_of(napi, struct smsc911x_data, napi); 1195 struct net_device *dev = pdata->dev; 1196 int npackets = 0; 1197 1198 while (npackets < budget) { 1199 unsigned int pktlength; 1200 unsigned int pktwords; 1201 struct sk_buff *skb; 1202 unsigned int rxstat = smsc911x_rx_get_rxstatus(pdata); 1203 1204 if (!rxstat) { 1205 unsigned int temp; 1206 /* We processed all packets available. Tell NAPI it can 1207 * stop polling then re-enable rx interrupts */ 1208 smsc911x_reg_write(pdata, INT_STS, INT_STS_RSFL_); 1209 napi_complete(napi); 1210 temp = smsc911x_reg_read(pdata, INT_EN); 1211 temp |= INT_EN_RSFL_EN_; 1212 smsc911x_reg_write(pdata, INT_EN, temp); 1213 break; 1214 } 1215 1216 /* Count packet for NAPI scheduling, even if it has an error. 1217 * Error packets still require cycles to discard */ 1218 npackets++; 1219 1220 pktlength = ((rxstat & 0x3FFF0000) >> 16); 1221 pktwords = (pktlength + NET_IP_ALIGN + 3) >> 2; 1222 smsc911x_rx_counterrors(dev, rxstat); 1223 1224 if (unlikely(rxstat & RX_STS_ES_)) { 1225 SMSC_WARN(pdata, rx_err, 1226 "Discarding packet with error bit set"); 1227 /* Packet has an error, discard it and continue with 1228 * the next */ 1229 smsc911x_rx_fastforward(pdata, pktwords); 1230 dev->stats.rx_dropped++; 1231 continue; 1232 } 1233 1234 skb = netdev_alloc_skb(dev, pktwords << 2); 1235 if (unlikely(!skb)) { 1236 SMSC_WARN(pdata, rx_err, 1237 "Unable to allocate skb for rx packet"); 1238 /* Drop the packet and stop this polling iteration */ 1239 smsc911x_rx_fastforward(pdata, pktwords); 1240 dev->stats.rx_dropped++; 1241 break; 1242 } 1243 1244 pdata->ops->rx_readfifo(pdata, 1245 (unsigned int *)skb->data, pktwords); 1246 1247 /* Align IP on 16B boundary */ 1248 skb_reserve(skb, NET_IP_ALIGN); 1249 skb_put(skb, pktlength - 4); 1250 skb->protocol = eth_type_trans(skb, dev); 1251 skb_checksum_none_assert(skb); 1252 netif_receive_skb(skb); 1253 1254 /* Update counters */ 1255 dev->stats.rx_packets++; 1256 dev->stats.rx_bytes += (pktlength - 4); 1257 } 1258 1259 /* Return total received packets */ 1260 return npackets; 1261 } 1262 1263 /* Returns hash bit number for given MAC address 1264 * Example: 1265 * 01 00 5E 00 00 01 -> returns bit number 31 */ 1266 static unsigned int smsc911x_hash(char addr[ETH_ALEN]) 1267 { 1268 return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f; 1269 } 1270 1271 static void smsc911x_rx_multicast_update(struct smsc911x_data *pdata) 1272 { 1273 /* Performs the multicast & mac_cr update. This is called when 1274 * safe on the current hardware, and with the mac_lock held */ 1275 unsigned int mac_cr; 1276 1277 SMSC_ASSERT_MAC_LOCK(pdata); 1278 1279 mac_cr = smsc911x_mac_read(pdata, MAC_CR); 1280 mac_cr |= pdata->set_bits_mask; 1281 mac_cr &= ~(pdata->clear_bits_mask); 1282 smsc911x_mac_write(pdata, MAC_CR, mac_cr); 1283 smsc911x_mac_write(pdata, HASHH, pdata->hashhi); 1284 smsc911x_mac_write(pdata, HASHL, pdata->hashlo); 1285 SMSC_TRACE(pdata, hw, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X", 1286 mac_cr, pdata->hashhi, pdata->hashlo); 1287 } 1288 1289 static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata) 1290 { 1291 unsigned int mac_cr; 1292 1293 /* This function is only called for older LAN911x devices 1294 * (revA or revB), where MAC_CR, HASHH and HASHL should not 1295 * be modified during Rx - newer devices immediately update the 1296 * registers. 1297 * 1298 * This is called from interrupt context */ 1299 1300 spin_lock(&pdata->mac_lock); 1301 1302 /* Check Rx has stopped */ 1303 if (smsc911x_mac_read(pdata, MAC_CR) & MAC_CR_RXEN_) 1304 SMSC_WARN(pdata, drv, "Rx not stopped"); 1305 1306 /* Perform the update - safe to do now Rx has stopped */ 1307 smsc911x_rx_multicast_update(pdata); 1308 1309 /* Re-enable Rx */ 1310 mac_cr = smsc911x_mac_read(pdata, MAC_CR); 1311 mac_cr |= MAC_CR_RXEN_; 1312 smsc911x_mac_write(pdata, MAC_CR, mac_cr); 1313 1314 pdata->multicast_update_pending = 0; 1315 1316 spin_unlock(&pdata->mac_lock); 1317 } 1318 1319 static int smsc911x_phy_disable_energy_detect(struct smsc911x_data *pdata) 1320 { 1321 int rc = 0; 1322 1323 if (!pdata->phy_dev) 1324 return rc; 1325 1326 rc = phy_read(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS); 1327 1328 if (rc < 0) { 1329 SMSC_WARN(pdata, drv, "Failed reading PHY control reg"); 1330 return rc; 1331 } 1332 1333 /* 1334 * If energy is detected the PHY is already awake so is not necessary 1335 * to disable the energy detect power-down mode. 1336 */ 1337 if ((rc & MII_LAN83C185_EDPWRDOWN) && 1338 !(rc & MII_LAN83C185_ENERGYON)) { 1339 /* Disable energy detect mode for this SMSC Transceivers */ 1340 rc = phy_write(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS, 1341 rc & (~MII_LAN83C185_EDPWRDOWN)); 1342 1343 if (rc < 0) { 1344 SMSC_WARN(pdata, drv, "Failed writing PHY control reg"); 1345 return rc; 1346 } 1347 1348 mdelay(1); 1349 } 1350 1351 return 0; 1352 } 1353 1354 static int smsc911x_phy_enable_energy_detect(struct smsc911x_data *pdata) 1355 { 1356 int rc = 0; 1357 1358 if (!pdata->phy_dev) 1359 return rc; 1360 1361 rc = phy_read(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS); 1362 1363 if (rc < 0) { 1364 SMSC_WARN(pdata, drv, "Failed reading PHY control reg"); 1365 return rc; 1366 } 1367 1368 /* Only enable if energy detect mode is already disabled */ 1369 if (!(rc & MII_LAN83C185_EDPWRDOWN)) { 1370 mdelay(100); 1371 /* Enable energy detect mode for this SMSC Transceivers */ 1372 rc = phy_write(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS, 1373 rc | MII_LAN83C185_EDPWRDOWN); 1374 1375 if (rc < 0) { 1376 SMSC_WARN(pdata, drv, "Failed writing PHY control reg"); 1377 return rc; 1378 } 1379 1380 mdelay(1); 1381 } 1382 return 0; 1383 } 1384 1385 static int smsc911x_soft_reset(struct smsc911x_data *pdata) 1386 { 1387 unsigned int timeout; 1388 unsigned int temp; 1389 int ret; 1390 1391 /* 1392 * LAN9210/LAN9211/LAN9220/LAN9221 chips have an internal PHY that 1393 * are initialized in a Energy Detect Power-Down mode that prevents 1394 * the MAC chip to be software reseted. So we have to wakeup the PHY 1395 * before. 1396 */ 1397 if (pdata->generation == 4) { 1398 ret = smsc911x_phy_disable_energy_detect(pdata); 1399 1400 if (ret) { 1401 SMSC_WARN(pdata, drv, "Failed to wakeup the PHY chip"); 1402 return ret; 1403 } 1404 } 1405 1406 /* Reset the LAN911x */ 1407 smsc911x_reg_write(pdata, HW_CFG, HW_CFG_SRST_); 1408 timeout = 10; 1409 do { 1410 udelay(10); 1411 temp = smsc911x_reg_read(pdata, HW_CFG); 1412 } while ((--timeout) && (temp & HW_CFG_SRST_)); 1413 1414 if (unlikely(temp & HW_CFG_SRST_)) { 1415 SMSC_WARN(pdata, drv, "Failed to complete reset"); 1416 return -EIO; 1417 } 1418 1419 if (pdata->generation == 4) { 1420 ret = smsc911x_phy_enable_energy_detect(pdata); 1421 1422 if (ret) { 1423 SMSC_WARN(pdata, drv, "Failed to wakeup the PHY chip"); 1424 return ret; 1425 } 1426 } 1427 1428 return 0; 1429 } 1430 1431 /* Sets the device MAC address to dev_addr, called with mac_lock held */ 1432 static void 1433 smsc911x_set_hw_mac_address(struct smsc911x_data *pdata, u8 dev_addr[6]) 1434 { 1435 u32 mac_high16 = (dev_addr[5] << 8) | dev_addr[4]; 1436 u32 mac_low32 = (dev_addr[3] << 24) | (dev_addr[2] << 16) | 1437 (dev_addr[1] << 8) | dev_addr[0]; 1438 1439 SMSC_ASSERT_MAC_LOCK(pdata); 1440 1441 smsc911x_mac_write(pdata, ADDRH, mac_high16); 1442 smsc911x_mac_write(pdata, ADDRL, mac_low32); 1443 } 1444 1445 static void smsc911x_disable_irq_chip(struct net_device *dev) 1446 { 1447 struct smsc911x_data *pdata = netdev_priv(dev); 1448 1449 smsc911x_reg_write(pdata, INT_EN, 0); 1450 smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF); 1451 } 1452 1453 static int smsc911x_open(struct net_device *dev) 1454 { 1455 struct smsc911x_data *pdata = netdev_priv(dev); 1456 unsigned int timeout; 1457 unsigned int temp; 1458 unsigned int intcfg; 1459 1460 /* if the phy is not yet registered, retry later*/ 1461 if (!pdata->phy_dev) { 1462 SMSC_WARN(pdata, hw, "phy_dev is NULL"); 1463 return -EAGAIN; 1464 } 1465 1466 /* Reset the LAN911x */ 1467 if (smsc911x_soft_reset(pdata)) { 1468 SMSC_WARN(pdata, hw, "soft reset failed"); 1469 return -EIO; 1470 } 1471 1472 smsc911x_reg_write(pdata, HW_CFG, 0x00050000); 1473 smsc911x_reg_write(pdata, AFC_CFG, 0x006E3740); 1474 1475 /* Increase the legal frame size of VLAN tagged frames to 1522 bytes */ 1476 spin_lock_irq(&pdata->mac_lock); 1477 smsc911x_mac_write(pdata, VLAN1, ETH_P_8021Q); 1478 spin_unlock_irq(&pdata->mac_lock); 1479 1480 /* Make sure EEPROM has finished loading before setting GPIO_CFG */ 1481 timeout = 50; 1482 while ((smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) && 1483 --timeout) { 1484 udelay(10); 1485 } 1486 1487 if (unlikely(timeout == 0)) 1488 SMSC_WARN(pdata, ifup, 1489 "Timed out waiting for EEPROM busy bit to clear"); 1490 1491 smsc911x_reg_write(pdata, GPIO_CFG, 0x70070000); 1492 1493 /* The soft reset above cleared the device's MAC address, 1494 * restore it from local copy (set in probe) */ 1495 spin_lock_irq(&pdata->mac_lock); 1496 smsc911x_set_hw_mac_address(pdata, dev->dev_addr); 1497 spin_unlock_irq(&pdata->mac_lock); 1498 1499 /* Initialise irqs, but leave all sources disabled */ 1500 smsc911x_disable_irq_chip(dev); 1501 1502 /* Set interrupt deassertion to 100uS */ 1503 intcfg = ((10 << 24) | INT_CFG_IRQ_EN_); 1504 1505 if (pdata->config.irq_polarity) { 1506 SMSC_TRACE(pdata, ifup, "irq polarity: active high"); 1507 intcfg |= INT_CFG_IRQ_POL_; 1508 } else { 1509 SMSC_TRACE(pdata, ifup, "irq polarity: active low"); 1510 } 1511 1512 if (pdata->config.irq_type) { 1513 SMSC_TRACE(pdata, ifup, "irq type: push-pull"); 1514 intcfg |= INT_CFG_IRQ_TYPE_; 1515 } else { 1516 SMSC_TRACE(pdata, ifup, "irq type: open drain"); 1517 } 1518 1519 smsc911x_reg_write(pdata, INT_CFG, intcfg); 1520 1521 SMSC_TRACE(pdata, ifup, "Testing irq handler using IRQ %d", dev->irq); 1522 pdata->software_irq_signal = 0; 1523 smp_wmb(); 1524 1525 temp = smsc911x_reg_read(pdata, INT_EN); 1526 temp |= INT_EN_SW_INT_EN_; 1527 smsc911x_reg_write(pdata, INT_EN, temp); 1528 1529 timeout = 1000; 1530 while (timeout--) { 1531 if (pdata->software_irq_signal) 1532 break; 1533 msleep(1); 1534 } 1535 1536 if (!pdata->software_irq_signal) { 1537 netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n", 1538 dev->irq); 1539 return -ENODEV; 1540 } 1541 SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d", 1542 dev->irq); 1543 1544 netdev_info(dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n", 1545 (unsigned long)pdata->ioaddr, dev->irq); 1546 1547 /* Reset the last known duplex and carrier */ 1548 pdata->last_duplex = -1; 1549 pdata->last_carrier = -1; 1550 1551 /* Bring the PHY up */ 1552 phy_start(pdata->phy_dev); 1553 1554 temp = smsc911x_reg_read(pdata, HW_CFG); 1555 /* Preserve TX FIFO size and external PHY configuration */ 1556 temp &= (HW_CFG_TX_FIF_SZ_|0x00000FFF); 1557 temp |= HW_CFG_SF_; 1558 smsc911x_reg_write(pdata, HW_CFG, temp); 1559 1560 temp = smsc911x_reg_read(pdata, FIFO_INT); 1561 temp |= FIFO_INT_TX_AVAIL_LEVEL_; 1562 temp &= ~(FIFO_INT_RX_STS_LEVEL_); 1563 smsc911x_reg_write(pdata, FIFO_INT, temp); 1564 1565 /* set RX Data offset to 2 bytes for alignment */ 1566 smsc911x_reg_write(pdata, RX_CFG, (NET_IP_ALIGN << 8)); 1567 1568 /* enable NAPI polling before enabling RX interrupts */ 1569 napi_enable(&pdata->napi); 1570 1571 temp = smsc911x_reg_read(pdata, INT_EN); 1572 temp |= (INT_EN_TDFA_EN_ | INT_EN_RSFL_EN_ | INT_EN_RXSTOP_INT_EN_); 1573 smsc911x_reg_write(pdata, INT_EN, temp); 1574 1575 spin_lock_irq(&pdata->mac_lock); 1576 temp = smsc911x_mac_read(pdata, MAC_CR); 1577 temp |= (MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_); 1578 smsc911x_mac_write(pdata, MAC_CR, temp); 1579 spin_unlock_irq(&pdata->mac_lock); 1580 1581 smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_); 1582 1583 netif_start_queue(dev); 1584 return 0; 1585 } 1586 1587 /* Entry point for stopping the interface */ 1588 static int smsc911x_stop(struct net_device *dev) 1589 { 1590 struct smsc911x_data *pdata = netdev_priv(dev); 1591 unsigned int temp; 1592 1593 /* Disable all device interrupts */ 1594 temp = smsc911x_reg_read(pdata, INT_CFG); 1595 temp &= ~INT_CFG_IRQ_EN_; 1596 smsc911x_reg_write(pdata, INT_CFG, temp); 1597 1598 /* Stop Tx and Rx polling */ 1599 netif_stop_queue(dev); 1600 napi_disable(&pdata->napi); 1601 1602 /* At this point all Rx and Tx activity is stopped */ 1603 dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP); 1604 smsc911x_tx_update_txcounters(dev); 1605 1606 /* Bring the PHY down */ 1607 if (pdata->phy_dev) 1608 phy_stop(pdata->phy_dev); 1609 1610 SMSC_TRACE(pdata, ifdown, "Interface stopped"); 1611 return 0; 1612 } 1613 1614 /* Entry point for transmitting a packet */ 1615 static int smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) 1616 { 1617 struct smsc911x_data *pdata = netdev_priv(dev); 1618 unsigned int freespace; 1619 unsigned int tx_cmd_a; 1620 unsigned int tx_cmd_b; 1621 unsigned int temp; 1622 u32 wrsz; 1623 ulong bufp; 1624 1625 freespace = smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TDFREE_; 1626 1627 if (unlikely(freespace < TX_FIFO_LOW_THRESHOLD)) 1628 SMSC_WARN(pdata, tx_err, 1629 "Tx data fifo low, space available: %d", freespace); 1630 1631 /* Word alignment adjustment */ 1632 tx_cmd_a = (u32)((ulong)skb->data & 0x03) << 16; 1633 tx_cmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_; 1634 tx_cmd_a |= (unsigned int)skb->len; 1635 1636 tx_cmd_b = ((unsigned int)skb->len) << 16; 1637 tx_cmd_b |= (unsigned int)skb->len; 1638 1639 smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_a); 1640 smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_b); 1641 1642 bufp = (ulong)skb->data & (~0x3); 1643 wrsz = (u32)skb->len + 3; 1644 wrsz += (u32)((ulong)skb->data & 0x3); 1645 wrsz >>= 2; 1646 1647 pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz); 1648 freespace -= (skb->len + 32); 1649 skb_tx_timestamp(skb); 1650 dev_kfree_skb(skb); 1651 1652 if (unlikely(smsc911x_tx_get_txstatcount(pdata) >= 30)) 1653 smsc911x_tx_update_txcounters(dev); 1654 1655 if (freespace < TX_FIFO_LOW_THRESHOLD) { 1656 netif_stop_queue(dev); 1657 temp = smsc911x_reg_read(pdata, FIFO_INT); 1658 temp &= 0x00FFFFFF; 1659 temp |= 0x32000000; 1660 smsc911x_reg_write(pdata, FIFO_INT, temp); 1661 } 1662 1663 return NETDEV_TX_OK; 1664 } 1665 1666 /* Entry point for getting status counters */ 1667 static struct net_device_stats *smsc911x_get_stats(struct net_device *dev) 1668 { 1669 struct smsc911x_data *pdata = netdev_priv(dev); 1670 smsc911x_tx_update_txcounters(dev); 1671 dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP); 1672 return &dev->stats; 1673 } 1674 1675 /* Entry point for setting addressing modes */ 1676 static void smsc911x_set_multicast_list(struct net_device *dev) 1677 { 1678 struct smsc911x_data *pdata = netdev_priv(dev); 1679 unsigned long flags; 1680 1681 if (dev->flags & IFF_PROMISC) { 1682 /* Enabling promiscuous mode */ 1683 pdata->set_bits_mask = MAC_CR_PRMS_; 1684 pdata->clear_bits_mask = (MAC_CR_MCPAS_ | MAC_CR_HPFILT_); 1685 pdata->hashhi = 0; 1686 pdata->hashlo = 0; 1687 } else if (dev->flags & IFF_ALLMULTI) { 1688 /* Enabling all multicast mode */ 1689 pdata->set_bits_mask = MAC_CR_MCPAS_; 1690 pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_HPFILT_); 1691 pdata->hashhi = 0; 1692 pdata->hashlo = 0; 1693 } else if (!netdev_mc_empty(dev)) { 1694 /* Enabling specific multicast addresses */ 1695 unsigned int hash_high = 0; 1696 unsigned int hash_low = 0; 1697 struct netdev_hw_addr *ha; 1698 1699 pdata->set_bits_mask = MAC_CR_HPFILT_; 1700 pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_MCPAS_); 1701 1702 netdev_for_each_mc_addr(ha, dev) { 1703 unsigned int bitnum = smsc911x_hash(ha->addr); 1704 unsigned int mask = 0x01 << (bitnum & 0x1F); 1705 1706 if (bitnum & 0x20) 1707 hash_high |= mask; 1708 else 1709 hash_low |= mask; 1710 } 1711 1712 pdata->hashhi = hash_high; 1713 pdata->hashlo = hash_low; 1714 } else { 1715 /* Enabling local MAC address only */ 1716 pdata->set_bits_mask = 0; 1717 pdata->clear_bits_mask = 1718 (MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_); 1719 pdata->hashhi = 0; 1720 pdata->hashlo = 0; 1721 } 1722 1723 spin_lock_irqsave(&pdata->mac_lock, flags); 1724 1725 if (pdata->generation <= 1) { 1726 /* Older hardware revision - cannot change these flags while 1727 * receiving data */ 1728 if (!pdata->multicast_update_pending) { 1729 unsigned int temp; 1730 SMSC_TRACE(pdata, hw, "scheduling mcast update"); 1731 pdata->multicast_update_pending = 1; 1732 1733 /* Request the hardware to stop, then perform the 1734 * update when we get an RX_STOP interrupt */ 1735 temp = smsc911x_mac_read(pdata, MAC_CR); 1736 temp &= ~(MAC_CR_RXEN_); 1737 smsc911x_mac_write(pdata, MAC_CR, temp); 1738 } else { 1739 /* There is another update pending, this should now 1740 * use the newer values */ 1741 } 1742 } else { 1743 /* Newer hardware revision - can write immediately */ 1744 smsc911x_rx_multicast_update(pdata); 1745 } 1746 1747 spin_unlock_irqrestore(&pdata->mac_lock, flags); 1748 } 1749 1750 static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id) 1751 { 1752 struct net_device *dev = dev_id; 1753 struct smsc911x_data *pdata = netdev_priv(dev); 1754 u32 intsts = smsc911x_reg_read(pdata, INT_STS); 1755 u32 inten = smsc911x_reg_read(pdata, INT_EN); 1756 int serviced = IRQ_NONE; 1757 u32 temp; 1758 1759 if (unlikely(intsts & inten & INT_STS_SW_INT_)) { 1760 temp = smsc911x_reg_read(pdata, INT_EN); 1761 temp &= (~INT_EN_SW_INT_EN_); 1762 smsc911x_reg_write(pdata, INT_EN, temp); 1763 smsc911x_reg_write(pdata, INT_STS, INT_STS_SW_INT_); 1764 pdata->software_irq_signal = 1; 1765 smp_wmb(); 1766 serviced = IRQ_HANDLED; 1767 } 1768 1769 if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) { 1770 /* Called when there is a multicast update scheduled and 1771 * it is now safe to complete the update */ 1772 SMSC_TRACE(pdata, intr, "RX Stop interrupt"); 1773 smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_); 1774 if (pdata->multicast_update_pending) 1775 smsc911x_rx_multicast_update_workaround(pdata); 1776 serviced = IRQ_HANDLED; 1777 } 1778 1779 if (intsts & inten & INT_STS_TDFA_) { 1780 temp = smsc911x_reg_read(pdata, FIFO_INT); 1781 temp |= FIFO_INT_TX_AVAIL_LEVEL_; 1782 smsc911x_reg_write(pdata, FIFO_INT, temp); 1783 smsc911x_reg_write(pdata, INT_STS, INT_STS_TDFA_); 1784 netif_wake_queue(dev); 1785 serviced = IRQ_HANDLED; 1786 } 1787 1788 if (unlikely(intsts & inten & INT_STS_RXE_)) { 1789 SMSC_TRACE(pdata, intr, "RX Error interrupt"); 1790 smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_); 1791 serviced = IRQ_HANDLED; 1792 } 1793 1794 if (likely(intsts & inten & INT_STS_RSFL_)) { 1795 if (likely(napi_schedule_prep(&pdata->napi))) { 1796 /* Disable Rx interrupts */ 1797 temp = smsc911x_reg_read(pdata, INT_EN); 1798 temp &= (~INT_EN_RSFL_EN_); 1799 smsc911x_reg_write(pdata, INT_EN, temp); 1800 /* Schedule a NAPI poll */ 1801 __napi_schedule(&pdata->napi); 1802 } else { 1803 SMSC_WARN(pdata, rx_err, "napi_schedule_prep failed"); 1804 } 1805 serviced = IRQ_HANDLED; 1806 } 1807 1808 return serviced; 1809 } 1810 1811 #ifdef CONFIG_NET_POLL_CONTROLLER 1812 static void smsc911x_poll_controller(struct net_device *dev) 1813 { 1814 disable_irq(dev->irq); 1815 smsc911x_irqhandler(0, dev); 1816 enable_irq(dev->irq); 1817 } 1818 #endif /* CONFIG_NET_POLL_CONTROLLER */ 1819 1820 static int smsc911x_set_mac_address(struct net_device *dev, void *p) 1821 { 1822 struct smsc911x_data *pdata = netdev_priv(dev); 1823 struct sockaddr *addr = p; 1824 1825 /* On older hardware revisions we cannot change the mac address 1826 * registers while receiving data. Newer devices can safely change 1827 * this at any time. */ 1828 if (pdata->generation <= 1 && netif_running(dev)) 1829 return -EBUSY; 1830 1831 if (!is_valid_ether_addr(addr->sa_data)) 1832 return -EADDRNOTAVAIL; 1833 1834 dev->addr_assign_type &= ~NET_ADDR_RANDOM; 1835 memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); 1836 1837 spin_lock_irq(&pdata->mac_lock); 1838 smsc911x_set_hw_mac_address(pdata, dev->dev_addr); 1839 spin_unlock_irq(&pdata->mac_lock); 1840 1841 netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr); 1842 1843 return 0; 1844 } 1845 1846 /* Standard ioctls for mii-tool */ 1847 static int smsc911x_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) 1848 { 1849 struct smsc911x_data *pdata = netdev_priv(dev); 1850 1851 if (!netif_running(dev) || !pdata->phy_dev) 1852 return -EINVAL; 1853 1854 return phy_mii_ioctl(pdata->phy_dev, ifr, cmd); 1855 } 1856 1857 static int 1858 smsc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) 1859 { 1860 struct smsc911x_data *pdata = netdev_priv(dev); 1861 1862 cmd->maxtxpkt = 1; 1863 cmd->maxrxpkt = 1; 1864 return phy_ethtool_gset(pdata->phy_dev, cmd); 1865 } 1866 1867 static int 1868 smsc911x_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) 1869 { 1870 struct smsc911x_data *pdata = netdev_priv(dev); 1871 1872 return phy_ethtool_sset(pdata->phy_dev, cmd); 1873 } 1874 1875 static void smsc911x_ethtool_getdrvinfo(struct net_device *dev, 1876 struct ethtool_drvinfo *info) 1877 { 1878 strlcpy(info->driver, SMSC_CHIPNAME, sizeof(info->driver)); 1879 strlcpy(info->version, SMSC_DRV_VERSION, sizeof(info->version)); 1880 strlcpy(info->bus_info, dev_name(dev->dev.parent), 1881 sizeof(info->bus_info)); 1882 } 1883 1884 static int smsc911x_ethtool_nwayreset(struct net_device *dev) 1885 { 1886 struct smsc911x_data *pdata = netdev_priv(dev); 1887 1888 return phy_start_aneg(pdata->phy_dev); 1889 } 1890 1891 static u32 smsc911x_ethtool_getmsglevel(struct net_device *dev) 1892 { 1893 struct smsc911x_data *pdata = netdev_priv(dev); 1894 return pdata->msg_enable; 1895 } 1896 1897 static void smsc911x_ethtool_setmsglevel(struct net_device *dev, u32 level) 1898 { 1899 struct smsc911x_data *pdata = netdev_priv(dev); 1900 pdata->msg_enable = level; 1901 } 1902 1903 static int smsc911x_ethtool_getregslen(struct net_device *dev) 1904 { 1905 return (((E2P_DATA - ID_REV) / 4 + 1) + (WUCSR - MAC_CR) + 1 + 32) * 1906 sizeof(u32); 1907 } 1908 1909 static void 1910 smsc911x_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs, 1911 void *buf) 1912 { 1913 struct smsc911x_data *pdata = netdev_priv(dev); 1914 struct phy_device *phy_dev = pdata->phy_dev; 1915 unsigned long flags; 1916 unsigned int i; 1917 unsigned int j = 0; 1918 u32 *data = buf; 1919 1920 regs->version = pdata->idrev; 1921 for (i = ID_REV; i <= E2P_DATA; i += (sizeof(u32))) 1922 data[j++] = smsc911x_reg_read(pdata, i); 1923 1924 for (i = MAC_CR; i <= WUCSR; i++) { 1925 spin_lock_irqsave(&pdata->mac_lock, flags); 1926 data[j++] = smsc911x_mac_read(pdata, i); 1927 spin_unlock_irqrestore(&pdata->mac_lock, flags); 1928 } 1929 1930 for (i = 0; i <= 31; i++) 1931 data[j++] = smsc911x_mii_read(phy_dev->bus, phy_dev->addr, i); 1932 } 1933 1934 static void smsc911x_eeprom_enable_access(struct smsc911x_data *pdata) 1935 { 1936 unsigned int temp = smsc911x_reg_read(pdata, GPIO_CFG); 1937 temp &= ~GPIO_CFG_EEPR_EN_; 1938 smsc911x_reg_write(pdata, GPIO_CFG, temp); 1939 msleep(1); 1940 } 1941 1942 static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op) 1943 { 1944 int timeout = 100; 1945 u32 e2cmd; 1946 1947 SMSC_TRACE(pdata, drv, "op 0x%08x", op); 1948 if (smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) { 1949 SMSC_WARN(pdata, drv, "Busy at start"); 1950 return -EBUSY; 1951 } 1952 1953 e2cmd = op | E2P_CMD_EPC_BUSY_; 1954 smsc911x_reg_write(pdata, E2P_CMD, e2cmd); 1955 1956 do { 1957 msleep(1); 1958 e2cmd = smsc911x_reg_read(pdata, E2P_CMD); 1959 } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout)); 1960 1961 if (!timeout) { 1962 SMSC_TRACE(pdata, drv, "TIMED OUT"); 1963 return -EAGAIN; 1964 } 1965 1966 if (e2cmd & E2P_CMD_EPC_TIMEOUT_) { 1967 SMSC_TRACE(pdata, drv, "Error occurred during eeprom operation"); 1968 return -EINVAL; 1969 } 1970 1971 return 0; 1972 } 1973 1974 static int smsc911x_eeprom_read_location(struct smsc911x_data *pdata, 1975 u8 address, u8 *data) 1976 { 1977 u32 op = E2P_CMD_EPC_CMD_READ_ | address; 1978 int ret; 1979 1980 SMSC_TRACE(pdata, drv, "address 0x%x", address); 1981 ret = smsc911x_eeprom_send_cmd(pdata, op); 1982 1983 if (!ret) 1984 data[address] = smsc911x_reg_read(pdata, E2P_DATA); 1985 1986 return ret; 1987 } 1988 1989 static int smsc911x_eeprom_write_location(struct smsc911x_data *pdata, 1990 u8 address, u8 data) 1991 { 1992 u32 op = E2P_CMD_EPC_CMD_ERASE_ | address; 1993 u32 temp; 1994 int ret; 1995 1996 SMSC_TRACE(pdata, drv, "address 0x%x, data 0x%x", address, data); 1997 ret = smsc911x_eeprom_send_cmd(pdata, op); 1998 1999 if (!ret) { 2000 op = E2P_CMD_EPC_CMD_WRITE_ | address; 2001 smsc911x_reg_write(pdata, E2P_DATA, (u32)data); 2002 2003 /* Workaround for hardware read-after-write restriction */ 2004 temp = smsc911x_reg_read(pdata, BYTE_TEST); 2005 2006 ret = smsc911x_eeprom_send_cmd(pdata, op); 2007 } 2008 2009 return ret; 2010 } 2011 2012 static int smsc911x_ethtool_get_eeprom_len(struct net_device *dev) 2013 { 2014 return SMSC911X_EEPROM_SIZE; 2015 } 2016 2017 static int smsc911x_ethtool_get_eeprom(struct net_device *dev, 2018 struct ethtool_eeprom *eeprom, u8 *data) 2019 { 2020 struct smsc911x_data *pdata = netdev_priv(dev); 2021 u8 eeprom_data[SMSC911X_EEPROM_SIZE]; 2022 int len; 2023 int i; 2024 2025 smsc911x_eeprom_enable_access(pdata); 2026 2027 len = min(eeprom->len, SMSC911X_EEPROM_SIZE); 2028 for (i = 0; i < len; i++) { 2029 int ret = smsc911x_eeprom_read_location(pdata, i, eeprom_data); 2030 if (ret < 0) { 2031 eeprom->len = 0; 2032 return ret; 2033 } 2034 } 2035 2036 memcpy(data, &eeprom_data[eeprom->offset], len); 2037 eeprom->len = len; 2038 return 0; 2039 } 2040 2041 static int smsc911x_ethtool_set_eeprom(struct net_device *dev, 2042 struct ethtool_eeprom *eeprom, u8 *data) 2043 { 2044 int ret; 2045 struct smsc911x_data *pdata = netdev_priv(dev); 2046 2047 smsc911x_eeprom_enable_access(pdata); 2048 smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWEN_); 2049 ret = smsc911x_eeprom_write_location(pdata, eeprom->offset, *data); 2050 smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWDS_); 2051 2052 /* Single byte write, according to man page */ 2053 eeprom->len = 1; 2054 2055 return ret; 2056 } 2057 2058 static const struct ethtool_ops smsc911x_ethtool_ops = { 2059 .get_settings = smsc911x_ethtool_getsettings, 2060 .set_settings = smsc911x_ethtool_setsettings, 2061 .get_link = ethtool_op_get_link, 2062 .get_drvinfo = smsc911x_ethtool_getdrvinfo, 2063 .nway_reset = smsc911x_ethtool_nwayreset, 2064 .get_msglevel = smsc911x_ethtool_getmsglevel, 2065 .set_msglevel = smsc911x_ethtool_setmsglevel, 2066 .get_regs_len = smsc911x_ethtool_getregslen, 2067 .get_regs = smsc911x_ethtool_getregs, 2068 .get_eeprom_len = smsc911x_ethtool_get_eeprom_len, 2069 .get_eeprom = smsc911x_ethtool_get_eeprom, 2070 .set_eeprom = smsc911x_ethtool_set_eeprom, 2071 .get_ts_info = ethtool_op_get_ts_info, 2072 }; 2073 2074 static const struct net_device_ops smsc911x_netdev_ops = { 2075 .ndo_open = smsc911x_open, 2076 .ndo_stop = smsc911x_stop, 2077 .ndo_start_xmit = smsc911x_hard_start_xmit, 2078 .ndo_get_stats = smsc911x_get_stats, 2079 .ndo_set_rx_mode = smsc911x_set_multicast_list, 2080 .ndo_do_ioctl = smsc911x_do_ioctl, 2081 .ndo_change_mtu = eth_change_mtu, 2082 .ndo_validate_addr = eth_validate_addr, 2083 .ndo_set_mac_address = smsc911x_set_mac_address, 2084 #ifdef CONFIG_NET_POLL_CONTROLLER 2085 .ndo_poll_controller = smsc911x_poll_controller, 2086 #endif 2087 }; 2088 2089 /* copies the current mac address from hardware to dev->dev_addr */ 2090 static void smsc911x_read_mac_address(struct net_device *dev) 2091 { 2092 struct smsc911x_data *pdata = netdev_priv(dev); 2093 u32 mac_high16 = smsc911x_mac_read(pdata, ADDRH); 2094 u32 mac_low32 = smsc911x_mac_read(pdata, ADDRL); 2095 2096 dev->dev_addr[0] = (u8)(mac_low32); 2097 dev->dev_addr[1] = (u8)(mac_low32 >> 8); 2098 dev->dev_addr[2] = (u8)(mac_low32 >> 16); 2099 dev->dev_addr[3] = (u8)(mac_low32 >> 24); 2100 dev->dev_addr[4] = (u8)(mac_high16); 2101 dev->dev_addr[5] = (u8)(mac_high16 >> 8); 2102 } 2103 2104 /* Initializing private device structures, only called from probe */ 2105 static int smsc911x_init(struct net_device *dev) 2106 { 2107 struct smsc911x_data *pdata = netdev_priv(dev); 2108 unsigned int byte_test, mask; 2109 unsigned int to = 100; 2110 2111 SMSC_TRACE(pdata, probe, "Driver Parameters:"); 2112 SMSC_TRACE(pdata, probe, "LAN base: 0x%08lX", 2113 (unsigned long)pdata->ioaddr); 2114 SMSC_TRACE(pdata, probe, "IRQ: %d", dev->irq); 2115 SMSC_TRACE(pdata, probe, "PHY will be autodetected."); 2116 2117 spin_lock_init(&pdata->dev_lock); 2118 spin_lock_init(&pdata->mac_lock); 2119 2120 if (pdata->ioaddr == 0) { 2121 SMSC_WARN(pdata, probe, "pdata->ioaddr: 0x00000000"); 2122 return -ENODEV; 2123 } 2124 2125 /* 2126 * poll the READY bit in PMT_CTRL. Any other access to the device is 2127 * forbidden while this bit isn't set. Try for 100ms 2128 * 2129 * Note that this test is done before the WORD_SWAP register is 2130 * programmed. So in some configurations the READY bit is at 16 before 2131 * WORD_SWAP is written to. This issue is worked around by waiting 2132 * until either bit 0 or bit 16 gets set in PMT_CTRL. 2133 * 2134 * SMSC has confirmed that checking bit 16 (marked as reserved in 2135 * the datasheet) is fine since these bits "will either never be set 2136 * or can only go high after READY does (so also indicate the device 2137 * is ready)". 2138 */ 2139 2140 mask = PMT_CTRL_READY_ | swahw32(PMT_CTRL_READY_); 2141 while (!(smsc911x_reg_read(pdata, PMT_CTRL) & mask) && --to) 2142 udelay(1000); 2143 2144 if (to == 0) { 2145 pr_err("Device not READY in 100ms aborting\n"); 2146 return -ENODEV; 2147 } 2148 2149 /* Check byte ordering */ 2150 byte_test = smsc911x_reg_read(pdata, BYTE_TEST); 2151 SMSC_TRACE(pdata, probe, "BYTE_TEST: 0x%08X", byte_test); 2152 if (byte_test == 0x43218765) { 2153 SMSC_TRACE(pdata, probe, "BYTE_TEST looks swapped, " 2154 "applying WORD_SWAP"); 2155 smsc911x_reg_write(pdata, WORD_SWAP, 0xffffffff); 2156 2157 /* 1 dummy read of BYTE_TEST is needed after a write to 2158 * WORD_SWAP before its contents are valid */ 2159 byte_test = smsc911x_reg_read(pdata, BYTE_TEST); 2160 2161 byte_test = smsc911x_reg_read(pdata, BYTE_TEST); 2162 } 2163 2164 if (byte_test != 0x87654321) { 2165 SMSC_WARN(pdata, drv, "BYTE_TEST: 0x%08X", byte_test); 2166 if (((byte_test >> 16) & 0xFFFF) == (byte_test & 0xFFFF)) { 2167 SMSC_WARN(pdata, probe, 2168 "top 16 bits equal to bottom 16 bits"); 2169 SMSC_TRACE(pdata, probe, 2170 "This may mean the chip is set " 2171 "for 32 bit while the bus is reading 16 bit"); 2172 } 2173 return -ENODEV; 2174 } 2175 2176 /* Default generation to zero (all workarounds apply) */ 2177 pdata->generation = 0; 2178 2179 pdata->idrev = smsc911x_reg_read(pdata, ID_REV); 2180 switch (pdata->idrev & 0xFFFF0000) { 2181 case 0x01180000: 2182 case 0x01170000: 2183 case 0x01160000: 2184 case 0x01150000: 2185 case 0x218A0000: 2186 /* LAN911[5678] family */ 2187 pdata->generation = pdata->idrev & 0x0000FFFF; 2188 break; 2189 2190 case 0x118A0000: 2191 case 0x117A0000: 2192 case 0x116A0000: 2193 case 0x115A0000: 2194 /* LAN921[5678] family */ 2195 pdata->generation = 3; 2196 break; 2197 2198 case 0x92100000: 2199 case 0x92110000: 2200 case 0x92200000: 2201 case 0x92210000: 2202 /* LAN9210/LAN9211/LAN9220/LAN9221 */ 2203 pdata->generation = 4; 2204 break; 2205 2206 default: 2207 SMSC_WARN(pdata, probe, "LAN911x not identified, idrev: 0x%08X", 2208 pdata->idrev); 2209 return -ENODEV; 2210 } 2211 2212 SMSC_TRACE(pdata, probe, 2213 "LAN911x identified, idrev: 0x%08X, generation: %d", 2214 pdata->idrev, pdata->generation); 2215 2216 if (pdata->generation == 0) 2217 SMSC_WARN(pdata, probe, 2218 "This driver is not intended for this chip revision"); 2219 2220 /* workaround for platforms without an eeprom, where the mac address 2221 * is stored elsewhere and set by the bootloader. This saves the 2222 * mac address before resetting the device */ 2223 if (pdata->config.flags & SMSC911X_SAVE_MAC_ADDRESS) { 2224 spin_lock_irq(&pdata->mac_lock); 2225 smsc911x_read_mac_address(dev); 2226 spin_unlock_irq(&pdata->mac_lock); 2227 } 2228 2229 /* Reset the LAN911x */ 2230 if (smsc911x_soft_reset(pdata)) 2231 return -ENODEV; 2232 2233 ether_setup(dev); 2234 dev->flags |= IFF_MULTICAST; 2235 netif_napi_add(dev, &pdata->napi, smsc911x_poll, SMSC_NAPI_WEIGHT); 2236 dev->netdev_ops = &smsc911x_netdev_ops; 2237 dev->ethtool_ops = &smsc911x_ethtool_ops; 2238 2239 return 0; 2240 } 2241 2242 static int smsc911x_drv_remove(struct platform_device *pdev) 2243 { 2244 struct net_device *dev; 2245 struct smsc911x_data *pdata; 2246 struct resource *res; 2247 2248 dev = platform_get_drvdata(pdev); 2249 BUG_ON(!dev); 2250 pdata = netdev_priv(dev); 2251 BUG_ON(!pdata); 2252 BUG_ON(!pdata->ioaddr); 2253 BUG_ON(!pdata->phy_dev); 2254 2255 SMSC_TRACE(pdata, ifdown, "Stopping driver"); 2256 2257 phy_disconnect(pdata->phy_dev); 2258 pdata->phy_dev = NULL; 2259 mdiobus_unregister(pdata->mii_bus); 2260 mdiobus_free(pdata->mii_bus); 2261 2262 platform_set_drvdata(pdev, NULL); 2263 unregister_netdev(dev); 2264 free_irq(dev->irq, dev); 2265 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, 2266 "smsc911x-memory"); 2267 if (!res) 2268 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 2269 2270 release_mem_region(res->start, resource_size(res)); 2271 2272 iounmap(pdata->ioaddr); 2273 2274 (void)smsc911x_disable_resources(pdev); 2275 smsc911x_free_resources(pdev); 2276 2277 free_netdev(dev); 2278 2279 return 0; 2280 } 2281 2282 /* standard register acces */ 2283 static const struct smsc911x_ops standard_smsc911x_ops = { 2284 .reg_read = __smsc911x_reg_read, 2285 .reg_write = __smsc911x_reg_write, 2286 .rx_readfifo = smsc911x_rx_readfifo, 2287 .tx_writefifo = smsc911x_tx_writefifo, 2288 }; 2289 2290 /* shifted register access */ 2291 static const struct smsc911x_ops shifted_smsc911x_ops = { 2292 .reg_read = __smsc911x_reg_read_shift, 2293 .reg_write = __smsc911x_reg_write_shift, 2294 .rx_readfifo = smsc911x_rx_readfifo_shift, 2295 .tx_writefifo = smsc911x_tx_writefifo_shift, 2296 }; 2297 2298 #ifdef CONFIG_OF 2299 static int smsc911x_probe_config_dt(struct smsc911x_platform_config *config, 2300 struct device_node *np) 2301 { 2302 const char *mac; 2303 u32 width = 0; 2304 2305 if (!np) 2306 return -ENODEV; 2307 2308 config->phy_interface = of_get_phy_mode(np); 2309 2310 mac = of_get_mac_address(np); 2311 if (mac) 2312 memcpy(config->mac, mac, ETH_ALEN); 2313 2314 of_property_read_u32(np, "reg-shift", &config->shift); 2315 2316 of_property_read_u32(np, "reg-io-width", &width); 2317 if (width == 4) 2318 config->flags |= SMSC911X_USE_32BIT; 2319 else 2320 config->flags |= SMSC911X_USE_16BIT; 2321 2322 if (of_get_property(np, "smsc,irq-active-high", NULL)) 2323 config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH; 2324 2325 if (of_get_property(np, "smsc,irq-push-pull", NULL)) 2326 config->irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL; 2327 2328 if (of_get_property(np, "smsc,force-internal-phy", NULL)) 2329 config->flags |= SMSC911X_FORCE_INTERNAL_PHY; 2330 2331 if (of_get_property(np, "smsc,force-external-phy", NULL)) 2332 config->flags |= SMSC911X_FORCE_EXTERNAL_PHY; 2333 2334 if (of_get_property(np, "smsc,save-mac-address", NULL)) 2335 config->flags |= SMSC911X_SAVE_MAC_ADDRESS; 2336 2337 return 0; 2338 } 2339 #else 2340 static inline int smsc911x_probe_config_dt( 2341 struct smsc911x_platform_config *config, 2342 struct device_node *np) 2343 { 2344 return -ENODEV; 2345 } 2346 #endif /* CONFIG_OF */ 2347 2348 static int smsc911x_drv_probe(struct platform_device *pdev) 2349 { 2350 struct device_node *np = pdev->dev.of_node; 2351 struct net_device *dev; 2352 struct smsc911x_data *pdata; 2353 struct smsc911x_platform_config *config = pdev->dev.platform_data; 2354 struct resource *res, *irq_res; 2355 unsigned int intcfg = 0; 2356 int res_size, irq_flags; 2357 int retval; 2358 2359 pr_info("Driver version %s\n", SMSC_DRV_VERSION); 2360 2361 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, 2362 "smsc911x-memory"); 2363 if (!res) 2364 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 2365 if (!res) { 2366 pr_warn("Could not allocate resource\n"); 2367 retval = -ENODEV; 2368 goto out_0; 2369 } 2370 res_size = resource_size(res); 2371 2372 irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 2373 if (!irq_res) { 2374 pr_warn("Could not allocate irq resource\n"); 2375 retval = -ENODEV; 2376 goto out_0; 2377 } 2378 2379 if (!request_mem_region(res->start, res_size, SMSC_CHIPNAME)) { 2380 retval = -EBUSY; 2381 goto out_0; 2382 } 2383 2384 dev = alloc_etherdev(sizeof(struct smsc911x_data)); 2385 if (!dev) { 2386 retval = -ENOMEM; 2387 goto out_release_io_1; 2388 } 2389 2390 SET_NETDEV_DEV(dev, &pdev->dev); 2391 2392 pdata = netdev_priv(dev); 2393 dev->irq = irq_res->start; 2394 irq_flags = irq_res->flags & IRQF_TRIGGER_MASK; 2395 pdata->ioaddr = ioremap_nocache(res->start, res_size); 2396 2397 pdata->dev = dev; 2398 pdata->msg_enable = ((1 << debug) - 1); 2399 2400 platform_set_drvdata(pdev, dev); 2401 2402 retval = smsc911x_request_resources(pdev); 2403 if (retval) 2404 goto out_request_resources_fail; 2405 2406 retval = smsc911x_enable_resources(pdev); 2407 if (retval) 2408 goto out_enable_resources_fail; 2409 2410 if (pdata->ioaddr == NULL) { 2411 SMSC_WARN(pdata, probe, "Error smsc911x base address invalid"); 2412 retval = -ENOMEM; 2413 goto out_disable_resources; 2414 } 2415 2416 retval = smsc911x_probe_config_dt(&pdata->config, np); 2417 if (retval && config) { 2418 /* copy config parameters across to pdata */ 2419 memcpy(&pdata->config, config, sizeof(pdata->config)); 2420 retval = 0; 2421 } 2422 2423 if (retval) { 2424 SMSC_WARN(pdata, probe, "Error smsc911x config not found"); 2425 goto out_disable_resources; 2426 } 2427 2428 /* assume standard, non-shifted, access to HW registers */ 2429 pdata->ops = &standard_smsc911x_ops; 2430 /* apply the right access if shifting is needed */ 2431 if (pdata->config.shift) 2432 pdata->ops = &shifted_smsc911x_ops; 2433 2434 retval = smsc911x_init(dev); 2435 if (retval < 0) 2436 goto out_disable_resources; 2437 2438 /* configure irq polarity and type before connecting isr */ 2439 if (pdata->config.irq_polarity == SMSC911X_IRQ_POLARITY_ACTIVE_HIGH) 2440 intcfg |= INT_CFG_IRQ_POL_; 2441 2442 if (pdata->config.irq_type == SMSC911X_IRQ_TYPE_PUSH_PULL) 2443 intcfg |= INT_CFG_IRQ_TYPE_; 2444 2445 smsc911x_reg_write(pdata, INT_CFG, intcfg); 2446 2447 /* Ensure interrupts are globally disabled before connecting ISR */ 2448 smsc911x_disable_irq_chip(dev); 2449 2450 retval = request_irq(dev->irq, smsc911x_irqhandler, 2451 irq_flags | IRQF_SHARED, dev->name, dev); 2452 if (retval) { 2453 SMSC_WARN(pdata, probe, 2454 "Unable to claim requested irq: %d", dev->irq); 2455 goto out_disable_resources; 2456 } 2457 2458 retval = register_netdev(dev); 2459 if (retval) { 2460 SMSC_WARN(pdata, probe, "Error %i registering device", retval); 2461 goto out_free_irq; 2462 } else { 2463 SMSC_TRACE(pdata, probe, 2464 "Network interface: \"%s\"", dev->name); 2465 } 2466 2467 retval = smsc911x_mii_init(pdev, dev); 2468 if (retval) { 2469 SMSC_WARN(pdata, probe, "Error %i initialising mii", retval); 2470 goto out_unregister_netdev_5; 2471 } 2472 2473 spin_lock_irq(&pdata->mac_lock); 2474 2475 /* Check if mac address has been specified when bringing interface up */ 2476 if (is_valid_ether_addr(dev->dev_addr)) { 2477 smsc911x_set_hw_mac_address(pdata, dev->dev_addr); 2478 SMSC_TRACE(pdata, probe, 2479 "MAC Address is specified by configuration"); 2480 } else if (is_valid_ether_addr(pdata->config.mac)) { 2481 memcpy(dev->dev_addr, pdata->config.mac, 6); 2482 SMSC_TRACE(pdata, probe, 2483 "MAC Address specified by platform data"); 2484 } else { 2485 /* Try reading mac address from device. if EEPROM is present 2486 * it will already have been set */ 2487 smsc_get_mac(dev); 2488 2489 if (is_valid_ether_addr(dev->dev_addr)) { 2490 /* eeprom values are valid so use them */ 2491 SMSC_TRACE(pdata, probe, 2492 "Mac Address is read from LAN911x EEPROM"); 2493 } else { 2494 /* eeprom values are invalid, generate random MAC */ 2495 eth_hw_addr_random(dev); 2496 smsc911x_set_hw_mac_address(pdata, dev->dev_addr); 2497 SMSC_TRACE(pdata, probe, 2498 "MAC Address is set to eth_random_addr"); 2499 } 2500 } 2501 2502 spin_unlock_irq(&pdata->mac_lock); 2503 2504 netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr); 2505 2506 return 0; 2507 2508 out_unregister_netdev_5: 2509 unregister_netdev(dev); 2510 out_free_irq: 2511 free_irq(dev->irq, dev); 2512 out_disable_resources: 2513 (void)smsc911x_disable_resources(pdev); 2514 out_enable_resources_fail: 2515 smsc911x_free_resources(pdev); 2516 out_request_resources_fail: 2517 platform_set_drvdata(pdev, NULL); 2518 iounmap(pdata->ioaddr); 2519 free_netdev(dev); 2520 out_release_io_1: 2521 release_mem_region(res->start, resource_size(res)); 2522 out_0: 2523 return retval; 2524 } 2525 2526 #ifdef CONFIG_PM 2527 /* This implementation assumes the devices remains powered on its VDDVARIO 2528 * pins during suspend. */ 2529 2530 /* TODO: implement freeze/thaw callbacks for hibernation.*/ 2531 2532 static int smsc911x_suspend(struct device *dev) 2533 { 2534 struct net_device *ndev = dev_get_drvdata(dev); 2535 struct smsc911x_data *pdata = netdev_priv(ndev); 2536 2537 /* enable wake on LAN, energy detection and the external PME 2538 * signal. */ 2539 smsc911x_reg_write(pdata, PMT_CTRL, 2540 PMT_CTRL_PM_MODE_D1_ | PMT_CTRL_WOL_EN_ | 2541 PMT_CTRL_ED_EN_ | PMT_CTRL_PME_EN_); 2542 2543 return 0; 2544 } 2545 2546 static int smsc911x_resume(struct device *dev) 2547 { 2548 struct net_device *ndev = dev_get_drvdata(dev); 2549 struct smsc911x_data *pdata = netdev_priv(ndev); 2550 unsigned int to = 100; 2551 2552 /* Note 3.11 from the datasheet: 2553 * "When the LAN9220 is in a power saving state, a write of any 2554 * data to the BYTE_TEST register will wake-up the device." 2555 */ 2556 smsc911x_reg_write(pdata, BYTE_TEST, 0); 2557 2558 /* poll the READY bit in PMT_CTRL. Any other access to the device is 2559 * forbidden while this bit isn't set. Try for 100ms and return -EIO 2560 * if it failed. */ 2561 while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to) 2562 udelay(1000); 2563 2564 return (to == 0) ? -EIO : 0; 2565 } 2566 2567 static const struct dev_pm_ops smsc911x_pm_ops = { 2568 .suspend = smsc911x_suspend, 2569 .resume = smsc911x_resume, 2570 }; 2571 2572 #define SMSC911X_PM_OPS (&smsc911x_pm_ops) 2573 2574 #else 2575 #define SMSC911X_PM_OPS NULL 2576 #endif 2577 2578 #ifdef CONFIG_OF 2579 static const struct of_device_id smsc911x_dt_ids[] = { 2580 { .compatible = "smsc,lan9115", }, 2581 { /* sentinel */ } 2582 }; 2583 MODULE_DEVICE_TABLE(of, smsc911x_dt_ids); 2584 #endif 2585 2586 static struct platform_driver smsc911x_driver = { 2587 .probe = smsc911x_drv_probe, 2588 .remove = smsc911x_drv_remove, 2589 .driver = { 2590 .name = SMSC_CHIPNAME, 2591 .owner = THIS_MODULE, 2592 .pm = SMSC911X_PM_OPS, 2593 .of_match_table = of_match_ptr(smsc911x_dt_ids), 2594 }, 2595 }; 2596 2597 /* Entry point for loading the module */ 2598 static int __init smsc911x_init_module(void) 2599 { 2600 SMSC_INITIALIZE(); 2601 return platform_driver_register(&smsc911x_driver); 2602 } 2603 2604 /* entry point for unloading the module */ 2605 static void __exit smsc911x_cleanup_module(void) 2606 { 2607 platform_driver_unregister(&smsc911x_driver); 2608 } 2609 2610 module_init(smsc911x_init_module); 2611 module_exit(smsc911x_cleanup_module); 2612