xref: /linux/drivers/net/ethernet/smsc/smsc911x.c (revision b2d0f5d5dc53532e6f07bc546a476a55ebdfe0f3)
1 /***************************************************************************
2  *
3  * Copyright (C) 2004-2008 SMSC
4  * Copyright (C) 2005-2008 ARM
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * as published by the Free Software Foundation; either version 2
9  * of the License, or (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, see <http://www.gnu.org/licenses/>.
18  *
19  ***************************************************************************
20  * Rewritten, heavily based on smsc911x simple driver by SMSC.
21  * Partly uses io macros from smc91x.c by Nicolas Pitre
22  *
23  * Supported devices:
24  *   LAN9115, LAN9116, LAN9117, LAN9118
25  *   LAN9215, LAN9216, LAN9217, LAN9218
26  *   LAN9210, LAN9211
27  *   LAN9220, LAN9221
28  *   LAN89218,LAN9250
29  *
30  */
31 
32 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
33 
34 #include <linux/crc32.h>
35 #include <linux/clk.h>
36 #include <linux/delay.h>
37 #include <linux/errno.h>
38 #include <linux/etherdevice.h>
39 #include <linux/ethtool.h>
40 #include <linux/init.h>
41 #include <linux/interrupt.h>
42 #include <linux/ioport.h>
43 #include <linux/kernel.h>
44 #include <linux/module.h>
45 #include <linux/netdevice.h>
46 #include <linux/platform_device.h>
47 #include <linux/regulator/consumer.h>
48 #include <linux/sched.h>
49 #include <linux/timer.h>
50 #include <linux/bug.h>
51 #include <linux/bitops.h>
52 #include <linux/irq.h>
53 #include <linux/io.h>
54 #include <linux/swab.h>
55 #include <linux/phy.h>
56 #include <linux/smsc911x.h>
57 #include <linux/device.h>
58 #include <linux/of.h>
59 #include <linux/of_device.h>
60 #include <linux/of_gpio.h>
61 #include <linux/of_net.h>
62 #include <linux/acpi.h>
63 #include <linux/pm_runtime.h>
64 #include <linux/property.h>
65 #include <linux/gpio/consumer.h>
66 
67 #include "smsc911x.h"
68 
69 #define SMSC_CHIPNAME		"smsc911x"
70 #define SMSC_MDIONAME		"smsc911x-mdio"
71 #define SMSC_DRV_VERSION	"2008-10-21"
72 
73 MODULE_LICENSE("GPL");
74 MODULE_VERSION(SMSC_DRV_VERSION);
75 MODULE_ALIAS("platform:smsc911x");
76 
77 #if USE_DEBUG > 0
78 static int debug = 16;
79 #else
80 static int debug = 3;
81 #endif
82 
83 module_param(debug, int, 0);
84 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
85 
86 struct smsc911x_data;
87 
88 struct smsc911x_ops {
89 	u32 (*reg_read)(struct smsc911x_data *pdata, u32 reg);
90 	void (*reg_write)(struct smsc911x_data *pdata, u32 reg, u32 val);
91 	void (*rx_readfifo)(struct smsc911x_data *pdata,
92 				unsigned int *buf, unsigned int wordcount);
93 	void (*tx_writefifo)(struct smsc911x_data *pdata,
94 				unsigned int *buf, unsigned int wordcount);
95 };
96 
97 #define SMSC911X_NUM_SUPPLIES 2
98 
99 struct smsc911x_data {
100 	void __iomem *ioaddr;
101 
102 	unsigned int idrev;
103 
104 	/* used to decide which workarounds apply */
105 	unsigned int generation;
106 
107 	/* device configuration (copied from platform_data during probe) */
108 	struct smsc911x_platform_config config;
109 
110 	/* This needs to be acquired before calling any of below:
111 	 * smsc911x_mac_read(), smsc911x_mac_write()
112 	 */
113 	spinlock_t mac_lock;
114 
115 	/* spinlock to ensure register accesses are serialised */
116 	spinlock_t dev_lock;
117 
118 	struct mii_bus *mii_bus;
119 	unsigned int using_extphy;
120 	int last_duplex;
121 	int last_carrier;
122 
123 	u32 msg_enable;
124 	unsigned int gpio_setting;
125 	unsigned int gpio_orig_setting;
126 	struct net_device *dev;
127 	struct napi_struct napi;
128 
129 	unsigned int software_irq_signal;
130 
131 #ifdef USE_PHY_WORK_AROUND
132 #define MIN_PACKET_SIZE (64)
133 	char loopback_tx_pkt[MIN_PACKET_SIZE];
134 	char loopback_rx_pkt[MIN_PACKET_SIZE];
135 	unsigned int resetcount;
136 #endif
137 
138 	/* Members for Multicast filter workaround */
139 	unsigned int multicast_update_pending;
140 	unsigned int set_bits_mask;
141 	unsigned int clear_bits_mask;
142 	unsigned int hashhi;
143 	unsigned int hashlo;
144 
145 	/* register access functions */
146 	const struct smsc911x_ops *ops;
147 
148 	/* regulators */
149 	struct regulator_bulk_data supplies[SMSC911X_NUM_SUPPLIES];
150 
151 	/* Reset GPIO */
152 	struct gpio_desc *reset_gpiod;
153 
154 	/* clock */
155 	struct clk *clk;
156 };
157 
158 /* Easy access to information */
159 #define __smsc_shift(pdata, reg) ((reg) << ((pdata)->config.shift))
160 
161 static inline u32 __smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
162 {
163 	if (pdata->config.flags & SMSC911X_USE_32BIT)
164 		return readl(pdata->ioaddr + reg);
165 
166 	if (pdata->config.flags & SMSC911X_USE_16BIT)
167 		return ((readw(pdata->ioaddr + reg) & 0xFFFF) |
168 			((readw(pdata->ioaddr + reg + 2) & 0xFFFF) << 16));
169 
170 	BUG();
171 	return 0;
172 }
173 
174 static inline u32
175 __smsc911x_reg_read_shift(struct smsc911x_data *pdata, u32 reg)
176 {
177 	if (pdata->config.flags & SMSC911X_USE_32BIT)
178 		return readl(pdata->ioaddr + __smsc_shift(pdata, reg));
179 
180 	if (pdata->config.flags & SMSC911X_USE_16BIT)
181 		return (readw(pdata->ioaddr +
182 				__smsc_shift(pdata, reg)) & 0xFFFF) |
183 			((readw(pdata->ioaddr +
184 			__smsc_shift(pdata, reg + 2)) & 0xFFFF) << 16);
185 
186 	BUG();
187 	return 0;
188 }
189 
190 static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
191 {
192 	u32 data;
193 	unsigned long flags;
194 
195 	spin_lock_irqsave(&pdata->dev_lock, flags);
196 	data = pdata->ops->reg_read(pdata, reg);
197 	spin_unlock_irqrestore(&pdata->dev_lock, flags);
198 
199 	return data;
200 }
201 
202 static inline void __smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
203 					u32 val)
204 {
205 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
206 		writel(val, pdata->ioaddr + reg);
207 		return;
208 	}
209 
210 	if (pdata->config.flags & SMSC911X_USE_16BIT) {
211 		writew(val & 0xFFFF, pdata->ioaddr + reg);
212 		writew((val >> 16) & 0xFFFF, pdata->ioaddr + reg + 2);
213 		return;
214 	}
215 
216 	BUG();
217 }
218 
219 static inline void
220 __smsc911x_reg_write_shift(struct smsc911x_data *pdata, u32 reg, u32 val)
221 {
222 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
223 		writel(val, pdata->ioaddr + __smsc_shift(pdata, reg));
224 		return;
225 	}
226 
227 	if (pdata->config.flags & SMSC911X_USE_16BIT) {
228 		writew(val & 0xFFFF,
229 			pdata->ioaddr + __smsc_shift(pdata, reg));
230 		writew((val >> 16) & 0xFFFF,
231 			pdata->ioaddr + __smsc_shift(pdata, reg + 2));
232 		return;
233 	}
234 
235 	BUG();
236 }
237 
238 static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
239 				      u32 val)
240 {
241 	unsigned long flags;
242 
243 	spin_lock_irqsave(&pdata->dev_lock, flags);
244 	pdata->ops->reg_write(pdata, reg, val);
245 	spin_unlock_irqrestore(&pdata->dev_lock, flags);
246 }
247 
248 /* Writes a packet to the TX_DATA_FIFO */
249 static inline void
250 smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf,
251 		      unsigned int wordcount)
252 {
253 	unsigned long flags;
254 
255 	spin_lock_irqsave(&pdata->dev_lock, flags);
256 
257 	if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
258 		while (wordcount--)
259 			__smsc911x_reg_write(pdata, TX_DATA_FIFO,
260 					     swab32(*buf++));
261 		goto out;
262 	}
263 
264 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
265 		iowrite32_rep(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount);
266 		goto out;
267 	}
268 
269 	if (pdata->config.flags & SMSC911X_USE_16BIT) {
270 		while (wordcount--)
271 			__smsc911x_reg_write(pdata, TX_DATA_FIFO, *buf++);
272 		goto out;
273 	}
274 
275 	BUG();
276 out:
277 	spin_unlock_irqrestore(&pdata->dev_lock, flags);
278 }
279 
280 /* Writes a packet to the TX_DATA_FIFO - shifted version */
281 static inline void
282 smsc911x_tx_writefifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
283 		      unsigned int wordcount)
284 {
285 	unsigned long flags;
286 
287 	spin_lock_irqsave(&pdata->dev_lock, flags);
288 
289 	if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
290 		while (wordcount--)
291 			__smsc911x_reg_write_shift(pdata, TX_DATA_FIFO,
292 					     swab32(*buf++));
293 		goto out;
294 	}
295 
296 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
297 		iowrite32_rep(pdata->ioaddr + __smsc_shift(pdata,
298 						TX_DATA_FIFO), buf, wordcount);
299 		goto out;
300 	}
301 
302 	if (pdata->config.flags & SMSC911X_USE_16BIT) {
303 		while (wordcount--)
304 			__smsc911x_reg_write_shift(pdata,
305 						 TX_DATA_FIFO, *buf++);
306 		goto out;
307 	}
308 
309 	BUG();
310 out:
311 	spin_unlock_irqrestore(&pdata->dev_lock, flags);
312 }
313 
314 /* Reads a packet out of the RX_DATA_FIFO */
315 static inline void
316 smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf,
317 		     unsigned int wordcount)
318 {
319 	unsigned long flags;
320 
321 	spin_lock_irqsave(&pdata->dev_lock, flags);
322 
323 	if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
324 		while (wordcount--)
325 			*buf++ = swab32(__smsc911x_reg_read(pdata,
326 							    RX_DATA_FIFO));
327 		goto out;
328 	}
329 
330 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
331 		ioread32_rep(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount);
332 		goto out;
333 	}
334 
335 	if (pdata->config.flags & SMSC911X_USE_16BIT) {
336 		while (wordcount--)
337 			*buf++ = __smsc911x_reg_read(pdata, RX_DATA_FIFO);
338 		goto out;
339 	}
340 
341 	BUG();
342 out:
343 	spin_unlock_irqrestore(&pdata->dev_lock, flags);
344 }
345 
346 /* Reads a packet out of the RX_DATA_FIFO - shifted version */
347 static inline void
348 smsc911x_rx_readfifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
349 		     unsigned int wordcount)
350 {
351 	unsigned long flags;
352 
353 	spin_lock_irqsave(&pdata->dev_lock, flags);
354 
355 	if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
356 		while (wordcount--)
357 			*buf++ = swab32(__smsc911x_reg_read_shift(pdata,
358 							    RX_DATA_FIFO));
359 		goto out;
360 	}
361 
362 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
363 		ioread32_rep(pdata->ioaddr + __smsc_shift(pdata,
364 						RX_DATA_FIFO), buf, wordcount);
365 		goto out;
366 	}
367 
368 	if (pdata->config.flags & SMSC911X_USE_16BIT) {
369 		while (wordcount--)
370 			*buf++ = __smsc911x_reg_read_shift(pdata,
371 								RX_DATA_FIFO);
372 		goto out;
373 	}
374 
375 	BUG();
376 out:
377 	spin_unlock_irqrestore(&pdata->dev_lock, flags);
378 }
379 
380 /*
381  * enable regulator and clock resources.
382  */
383 static int smsc911x_enable_resources(struct platform_device *pdev)
384 {
385 	struct net_device *ndev = platform_get_drvdata(pdev);
386 	struct smsc911x_data *pdata = netdev_priv(ndev);
387 	int ret = 0;
388 
389 	ret = regulator_bulk_enable(ARRAY_SIZE(pdata->supplies),
390 			pdata->supplies);
391 	if (ret)
392 		netdev_err(ndev, "failed to enable regulators %d\n",
393 				ret);
394 
395 	if (!IS_ERR(pdata->clk)) {
396 		ret = clk_prepare_enable(pdata->clk);
397 		if (ret < 0)
398 			netdev_err(ndev, "failed to enable clock %d\n", ret);
399 	}
400 
401 	return ret;
402 }
403 
404 /*
405  * disable resources, currently just regulators.
406  */
407 static int smsc911x_disable_resources(struct platform_device *pdev)
408 {
409 	struct net_device *ndev = platform_get_drvdata(pdev);
410 	struct smsc911x_data *pdata = netdev_priv(ndev);
411 	int ret = 0;
412 
413 	ret = regulator_bulk_disable(ARRAY_SIZE(pdata->supplies),
414 			pdata->supplies);
415 
416 	if (!IS_ERR(pdata->clk))
417 		clk_disable_unprepare(pdata->clk);
418 
419 	return ret;
420 }
421 
422 /*
423  * Request resources, currently just regulators.
424  *
425  * The SMSC911x has two power pins: vddvario and vdd33a, in designs where
426  * these are not always-on we need to request regulators to be turned on
427  * before we can try to access the device registers.
428  */
429 static int smsc911x_request_resources(struct platform_device *pdev)
430 {
431 	struct net_device *ndev = platform_get_drvdata(pdev);
432 	struct smsc911x_data *pdata = netdev_priv(ndev);
433 	int ret = 0;
434 
435 	/* Request regulators */
436 	pdata->supplies[0].supply = "vdd33a";
437 	pdata->supplies[1].supply = "vddvario";
438 	ret = regulator_bulk_get(&pdev->dev,
439 			ARRAY_SIZE(pdata->supplies),
440 			pdata->supplies);
441 	if (ret) {
442 		/*
443 		 * Retry on deferrals, else just report the error
444 		 * and try to continue.
445 		 */
446 		if (ret == -EPROBE_DEFER)
447 			return ret;
448 		netdev_err(ndev, "couldn't get regulators %d\n",
449 				ret);
450 	}
451 
452 	/* Request optional RESET GPIO */
453 	pdata->reset_gpiod = devm_gpiod_get_optional(&pdev->dev,
454 						     "reset",
455 						     GPIOD_OUT_LOW);
456 
457 	/* Request clock */
458 	pdata->clk = clk_get(&pdev->dev, NULL);
459 	if (IS_ERR(pdata->clk))
460 		dev_dbg(&pdev->dev, "couldn't get clock %li\n",
461 			PTR_ERR(pdata->clk));
462 
463 	return ret;
464 }
465 
466 /*
467  * Free resources, currently just regulators.
468  *
469  */
470 static void smsc911x_free_resources(struct platform_device *pdev)
471 {
472 	struct net_device *ndev = platform_get_drvdata(pdev);
473 	struct smsc911x_data *pdata = netdev_priv(ndev);
474 
475 	/* Free regulators */
476 	regulator_bulk_free(ARRAY_SIZE(pdata->supplies),
477 			pdata->supplies);
478 
479 	/* Free clock */
480 	if (!IS_ERR(pdata->clk)) {
481 		clk_put(pdata->clk);
482 		pdata->clk = NULL;
483 	}
484 }
485 
486 /* waits for MAC not busy, with timeout.  Only called by smsc911x_mac_read
487  * and smsc911x_mac_write, so assumes mac_lock is held */
488 static int smsc911x_mac_complete(struct smsc911x_data *pdata)
489 {
490 	int i;
491 	u32 val;
492 
493 	SMSC_ASSERT_MAC_LOCK(pdata);
494 
495 	for (i = 0; i < 40; i++) {
496 		val = smsc911x_reg_read(pdata, MAC_CSR_CMD);
497 		if (!(val & MAC_CSR_CMD_CSR_BUSY_))
498 			return 0;
499 	}
500 	SMSC_WARN(pdata, hw, "Timed out waiting for MAC not BUSY. "
501 		  "MAC_CSR_CMD: 0x%08X", val);
502 	return -EIO;
503 }
504 
505 /* Fetches a MAC register value. Assumes mac_lock is acquired */
506 static u32 smsc911x_mac_read(struct smsc911x_data *pdata, unsigned int offset)
507 {
508 	unsigned int temp;
509 
510 	SMSC_ASSERT_MAC_LOCK(pdata);
511 
512 	temp = smsc911x_reg_read(pdata, MAC_CSR_CMD);
513 	if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) {
514 		SMSC_WARN(pdata, hw, "MAC busy at entry");
515 		return 0xFFFFFFFF;
516 	}
517 
518 	/* Send the MAC cmd */
519 	smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) |
520 		MAC_CSR_CMD_CSR_BUSY_ | MAC_CSR_CMD_R_NOT_W_));
521 
522 	/* Workaround for hardware read-after-write restriction */
523 	temp = smsc911x_reg_read(pdata, BYTE_TEST);
524 
525 	/* Wait for the read to complete */
526 	if (likely(smsc911x_mac_complete(pdata) == 0))
527 		return smsc911x_reg_read(pdata, MAC_CSR_DATA);
528 
529 	SMSC_WARN(pdata, hw, "MAC busy after read");
530 	return 0xFFFFFFFF;
531 }
532 
533 /* Set a mac register, mac_lock must be acquired before calling */
534 static void smsc911x_mac_write(struct smsc911x_data *pdata,
535 			       unsigned int offset, u32 val)
536 {
537 	unsigned int temp;
538 
539 	SMSC_ASSERT_MAC_LOCK(pdata);
540 
541 	temp = smsc911x_reg_read(pdata, MAC_CSR_CMD);
542 	if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) {
543 		SMSC_WARN(pdata, hw,
544 			  "smsc911x_mac_write failed, MAC busy at entry");
545 		return;
546 	}
547 
548 	/* Send data to write */
549 	smsc911x_reg_write(pdata, MAC_CSR_DATA, val);
550 
551 	/* Write the actual data */
552 	smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) |
553 		MAC_CSR_CMD_CSR_BUSY_));
554 
555 	/* Workaround for hardware read-after-write restriction */
556 	temp = smsc911x_reg_read(pdata, BYTE_TEST);
557 
558 	/* Wait for the write to complete */
559 	if (likely(smsc911x_mac_complete(pdata) == 0))
560 		return;
561 
562 	SMSC_WARN(pdata, hw, "smsc911x_mac_write failed, MAC busy after write");
563 }
564 
565 /* Get a phy register */
566 static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx)
567 {
568 	struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv;
569 	unsigned long flags;
570 	unsigned int addr;
571 	int i, reg;
572 
573 	spin_lock_irqsave(&pdata->mac_lock, flags);
574 
575 	/* Confirm MII not busy */
576 	if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
577 		SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_read???");
578 		reg = -EIO;
579 		goto out;
580 	}
581 
582 	/* Set the address, index & direction (read from PHY) */
583 	addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6);
584 	smsc911x_mac_write(pdata, MII_ACC, addr);
585 
586 	/* Wait for read to complete w/ timeout */
587 	for (i = 0; i < 100; i++)
588 		if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
589 			reg = smsc911x_mac_read(pdata, MII_DATA);
590 			goto out;
591 		}
592 
593 	SMSC_WARN(pdata, hw, "Timed out waiting for MII read to finish");
594 	reg = -EIO;
595 
596 out:
597 	spin_unlock_irqrestore(&pdata->mac_lock, flags);
598 	return reg;
599 }
600 
601 /* Set a phy register */
602 static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
603 			   u16 val)
604 {
605 	struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv;
606 	unsigned long flags;
607 	unsigned int addr;
608 	int i, reg;
609 
610 	spin_lock_irqsave(&pdata->mac_lock, flags);
611 
612 	/* Confirm MII not busy */
613 	if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
614 		SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_write???");
615 		reg = -EIO;
616 		goto out;
617 	}
618 
619 	/* Put the data to write in the MAC */
620 	smsc911x_mac_write(pdata, MII_DATA, val);
621 
622 	/* Set the address, index & direction (write to PHY) */
623 	addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) |
624 		MII_ACC_MII_WRITE_;
625 	smsc911x_mac_write(pdata, MII_ACC, addr);
626 
627 	/* Wait for write to complete w/ timeout */
628 	for (i = 0; i < 100; i++)
629 		if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
630 			reg = 0;
631 			goto out;
632 		}
633 
634 	SMSC_WARN(pdata, hw, "Timed out waiting for MII write to finish");
635 	reg = -EIO;
636 
637 out:
638 	spin_unlock_irqrestore(&pdata->mac_lock, flags);
639 	return reg;
640 }
641 
642 /* Switch to external phy. Assumes tx and rx are stopped. */
643 static void smsc911x_phy_enable_external(struct smsc911x_data *pdata)
644 {
645 	unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG);
646 
647 	/* Disable phy clocks to the MAC */
648 	hwcfg &= (~HW_CFG_PHY_CLK_SEL_);
649 	hwcfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_;
650 	smsc911x_reg_write(pdata, HW_CFG, hwcfg);
651 	udelay(10);	/* Enough time for clocks to stop */
652 
653 	/* Switch to external phy */
654 	hwcfg |= HW_CFG_EXT_PHY_EN_;
655 	smsc911x_reg_write(pdata, HW_CFG, hwcfg);
656 
657 	/* Enable phy clocks to the MAC */
658 	hwcfg &= (~HW_CFG_PHY_CLK_SEL_);
659 	hwcfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_;
660 	smsc911x_reg_write(pdata, HW_CFG, hwcfg);
661 	udelay(10);	/* Enough time for clocks to restart */
662 
663 	hwcfg |= HW_CFG_SMI_SEL_;
664 	smsc911x_reg_write(pdata, HW_CFG, hwcfg);
665 }
666 
667 /* Autodetects and enables external phy if present on supported chips.
668  * autodetection can be overridden by specifying SMSC911X_FORCE_INTERNAL_PHY
669  * or SMSC911X_FORCE_EXTERNAL_PHY in the platform_data flags. */
670 static void smsc911x_phy_initialise_external(struct smsc911x_data *pdata)
671 {
672 	unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG);
673 
674 	if (pdata->config.flags & SMSC911X_FORCE_INTERNAL_PHY) {
675 		SMSC_TRACE(pdata, hw, "Forcing internal PHY");
676 		pdata->using_extphy = 0;
677 	} else if (pdata->config.flags & SMSC911X_FORCE_EXTERNAL_PHY) {
678 		SMSC_TRACE(pdata, hw, "Forcing external PHY");
679 		smsc911x_phy_enable_external(pdata);
680 		pdata->using_extphy = 1;
681 	} else if (hwcfg & HW_CFG_EXT_PHY_DET_) {
682 		SMSC_TRACE(pdata, hw,
683 			   "HW_CFG EXT_PHY_DET set, using external PHY");
684 		smsc911x_phy_enable_external(pdata);
685 		pdata->using_extphy = 1;
686 	} else {
687 		SMSC_TRACE(pdata, hw,
688 			   "HW_CFG EXT_PHY_DET clear, using internal PHY");
689 		pdata->using_extphy = 0;
690 	}
691 }
692 
693 /* Fetches a tx status out of the status fifo */
694 static unsigned int smsc911x_tx_get_txstatus(struct smsc911x_data *pdata)
695 {
696 	unsigned int result =
697 	    smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TSUSED_;
698 
699 	if (result != 0)
700 		result = smsc911x_reg_read(pdata, TX_STATUS_FIFO);
701 
702 	return result;
703 }
704 
705 /* Fetches the next rx status */
706 static unsigned int smsc911x_rx_get_rxstatus(struct smsc911x_data *pdata)
707 {
708 	unsigned int result =
709 	    smsc911x_reg_read(pdata, RX_FIFO_INF) & RX_FIFO_INF_RXSUSED_;
710 
711 	if (result != 0)
712 		result = smsc911x_reg_read(pdata, RX_STATUS_FIFO);
713 
714 	return result;
715 }
716 
717 #ifdef USE_PHY_WORK_AROUND
718 static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata)
719 {
720 	unsigned int tries;
721 	u32 wrsz;
722 	u32 rdsz;
723 	ulong bufp;
724 
725 	for (tries = 0; tries < 10; tries++) {
726 		unsigned int txcmd_a;
727 		unsigned int txcmd_b;
728 		unsigned int status;
729 		unsigned int pktlength;
730 		unsigned int i;
731 
732 		/* Zero-out rx packet memory */
733 		memset(pdata->loopback_rx_pkt, 0, MIN_PACKET_SIZE);
734 
735 		/* Write tx packet to 118 */
736 		txcmd_a = (u32)((ulong)pdata->loopback_tx_pkt & 0x03) << 16;
737 		txcmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_;
738 		txcmd_a |= MIN_PACKET_SIZE;
739 
740 		txcmd_b = MIN_PACKET_SIZE << 16 | MIN_PACKET_SIZE;
741 
742 		smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_a);
743 		smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_b);
744 
745 		bufp = (ulong)pdata->loopback_tx_pkt & (~0x3);
746 		wrsz = MIN_PACKET_SIZE + 3;
747 		wrsz += (u32)((ulong)pdata->loopback_tx_pkt & 0x3);
748 		wrsz >>= 2;
749 
750 		pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
751 
752 		/* Wait till transmit is done */
753 		i = 60;
754 		do {
755 			udelay(5);
756 			status = smsc911x_tx_get_txstatus(pdata);
757 		} while ((i--) && (!status));
758 
759 		if (!status) {
760 			SMSC_WARN(pdata, hw,
761 				  "Failed to transmit during loopback test");
762 			continue;
763 		}
764 		if (status & TX_STS_ES_) {
765 			SMSC_WARN(pdata, hw,
766 				  "Transmit encountered errors during loopback test");
767 			continue;
768 		}
769 
770 		/* Wait till receive is done */
771 		i = 60;
772 		do {
773 			udelay(5);
774 			status = smsc911x_rx_get_rxstatus(pdata);
775 		} while ((i--) && (!status));
776 
777 		if (!status) {
778 			SMSC_WARN(pdata, hw,
779 				  "Failed to receive during loopback test");
780 			continue;
781 		}
782 		if (status & RX_STS_ES_) {
783 			SMSC_WARN(pdata, hw,
784 				  "Receive encountered errors during loopback test");
785 			continue;
786 		}
787 
788 		pktlength = ((status & 0x3FFF0000UL) >> 16);
789 		bufp = (ulong)pdata->loopback_rx_pkt;
790 		rdsz = pktlength + 3;
791 		rdsz += (u32)((ulong)pdata->loopback_rx_pkt & 0x3);
792 		rdsz >>= 2;
793 
794 		pdata->ops->rx_readfifo(pdata, (unsigned int *)bufp, rdsz);
795 
796 		if (pktlength != (MIN_PACKET_SIZE + 4)) {
797 			SMSC_WARN(pdata, hw, "Unexpected packet size "
798 				  "during loop back test, size=%d, will retry",
799 				  pktlength);
800 		} else {
801 			unsigned int j;
802 			int mismatch = 0;
803 			for (j = 0; j < MIN_PACKET_SIZE; j++) {
804 				if (pdata->loopback_tx_pkt[j]
805 				    != pdata->loopback_rx_pkt[j]) {
806 					mismatch = 1;
807 					break;
808 				}
809 			}
810 			if (!mismatch) {
811 				SMSC_TRACE(pdata, hw, "Successfully verified "
812 					   "loopback packet");
813 				return 0;
814 			} else {
815 				SMSC_WARN(pdata, hw, "Data mismatch "
816 					  "during loop back test, will retry");
817 			}
818 		}
819 	}
820 
821 	return -EIO;
822 }
823 
824 static int smsc911x_phy_reset(struct smsc911x_data *pdata)
825 {
826 	unsigned int temp;
827 	unsigned int i = 100000;
828 
829 	temp = smsc911x_reg_read(pdata, PMT_CTRL);
830 	smsc911x_reg_write(pdata, PMT_CTRL, temp | PMT_CTRL_PHY_RST_);
831 	do {
832 		msleep(1);
833 		temp = smsc911x_reg_read(pdata, PMT_CTRL);
834 	} while ((i--) && (temp & PMT_CTRL_PHY_RST_));
835 
836 	if (unlikely(temp & PMT_CTRL_PHY_RST_)) {
837 		SMSC_WARN(pdata, hw, "PHY reset failed to complete");
838 		return -EIO;
839 	}
840 	/* Extra delay required because the phy may not be completed with
841 	* its reset when BMCR_RESET is cleared. Specs say 256 uS is
842 	* enough delay but using 1ms here to be safe */
843 	msleep(1);
844 
845 	return 0;
846 }
847 
848 static int smsc911x_phy_loopbacktest(struct net_device *dev)
849 {
850 	struct smsc911x_data *pdata = netdev_priv(dev);
851 	struct phy_device *phy_dev = dev->phydev;
852 	int result = -EIO;
853 	unsigned int i, val;
854 	unsigned long flags;
855 
856 	/* Initialise tx packet using broadcast destination address */
857 	eth_broadcast_addr(pdata->loopback_tx_pkt);
858 
859 	/* Use incrementing source address */
860 	for (i = 6; i < 12; i++)
861 		pdata->loopback_tx_pkt[i] = (char)i;
862 
863 	/* Set length type field */
864 	pdata->loopback_tx_pkt[12] = 0x00;
865 	pdata->loopback_tx_pkt[13] = 0x00;
866 
867 	for (i = 14; i < MIN_PACKET_SIZE; i++)
868 		pdata->loopback_tx_pkt[i] = (char)i;
869 
870 	val = smsc911x_reg_read(pdata, HW_CFG);
871 	val &= HW_CFG_TX_FIF_SZ_;
872 	val |= HW_CFG_SF_;
873 	smsc911x_reg_write(pdata, HW_CFG, val);
874 
875 	smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_);
876 	smsc911x_reg_write(pdata, RX_CFG,
877 		(u32)((ulong)pdata->loopback_rx_pkt & 0x03) << 8);
878 
879 	for (i = 0; i < 10; i++) {
880 		/* Set PHY to 10/FD, no ANEG, and loopback mode */
881 		smsc911x_mii_write(phy_dev->mdio.bus, phy_dev->mdio.addr,
882 				   MII_BMCR, BMCR_LOOPBACK | BMCR_FULLDPLX);
883 
884 		/* Enable MAC tx/rx, FD */
885 		spin_lock_irqsave(&pdata->mac_lock, flags);
886 		smsc911x_mac_write(pdata, MAC_CR, MAC_CR_FDPX_
887 				   | MAC_CR_TXEN_ | MAC_CR_RXEN_);
888 		spin_unlock_irqrestore(&pdata->mac_lock, flags);
889 
890 		if (smsc911x_phy_check_loopbackpkt(pdata) == 0) {
891 			result = 0;
892 			break;
893 		}
894 		pdata->resetcount++;
895 
896 		/* Disable MAC rx */
897 		spin_lock_irqsave(&pdata->mac_lock, flags);
898 		smsc911x_mac_write(pdata, MAC_CR, 0);
899 		spin_unlock_irqrestore(&pdata->mac_lock, flags);
900 
901 		smsc911x_phy_reset(pdata);
902 	}
903 
904 	/* Disable MAC */
905 	spin_lock_irqsave(&pdata->mac_lock, flags);
906 	smsc911x_mac_write(pdata, MAC_CR, 0);
907 	spin_unlock_irqrestore(&pdata->mac_lock, flags);
908 
909 	/* Cancel PHY loopback mode */
910 	smsc911x_mii_write(phy_dev->mdio.bus, phy_dev->mdio.addr, MII_BMCR, 0);
911 
912 	smsc911x_reg_write(pdata, TX_CFG, 0);
913 	smsc911x_reg_write(pdata, RX_CFG, 0);
914 
915 	return result;
916 }
917 #endif				/* USE_PHY_WORK_AROUND */
918 
919 static void smsc911x_phy_update_flowcontrol(struct smsc911x_data *pdata)
920 {
921 	struct net_device *ndev = pdata->dev;
922 	struct phy_device *phy_dev = ndev->phydev;
923 	u32 afc = smsc911x_reg_read(pdata, AFC_CFG);
924 	u32 flow;
925 	unsigned long flags;
926 
927 	if (phy_dev->duplex == DUPLEX_FULL) {
928 		u16 lcladv = phy_read(phy_dev, MII_ADVERTISE);
929 		u16 rmtadv = phy_read(phy_dev, MII_LPA);
930 		u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
931 
932 		if (cap & FLOW_CTRL_RX)
933 			flow = 0xFFFF0002;
934 		else
935 			flow = 0;
936 
937 		if (cap & FLOW_CTRL_TX)
938 			afc |= 0xF;
939 		else
940 			afc &= ~0xF;
941 
942 		SMSC_TRACE(pdata, hw, "rx pause %s, tx pause %s",
943 			   (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
944 			   (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
945 	} else {
946 		SMSC_TRACE(pdata, hw, "half duplex");
947 		flow = 0;
948 		afc |= 0xF;
949 	}
950 
951 	spin_lock_irqsave(&pdata->mac_lock, flags);
952 	smsc911x_mac_write(pdata, FLOW, flow);
953 	spin_unlock_irqrestore(&pdata->mac_lock, flags);
954 
955 	smsc911x_reg_write(pdata, AFC_CFG, afc);
956 }
957 
958 /* Update link mode if anything has changed.  Called periodically when the
959  * PHY is in polling mode, even if nothing has changed. */
960 static void smsc911x_phy_adjust_link(struct net_device *dev)
961 {
962 	struct smsc911x_data *pdata = netdev_priv(dev);
963 	struct phy_device *phy_dev = dev->phydev;
964 	unsigned long flags;
965 	int carrier;
966 
967 	if (phy_dev->duplex != pdata->last_duplex) {
968 		unsigned int mac_cr;
969 		SMSC_TRACE(pdata, hw, "duplex state has changed");
970 
971 		spin_lock_irqsave(&pdata->mac_lock, flags);
972 		mac_cr = smsc911x_mac_read(pdata, MAC_CR);
973 		if (phy_dev->duplex) {
974 			SMSC_TRACE(pdata, hw,
975 				   "configuring for full duplex mode");
976 			mac_cr |= MAC_CR_FDPX_;
977 		} else {
978 			SMSC_TRACE(pdata, hw,
979 				   "configuring for half duplex mode");
980 			mac_cr &= ~MAC_CR_FDPX_;
981 		}
982 		smsc911x_mac_write(pdata, MAC_CR, mac_cr);
983 		spin_unlock_irqrestore(&pdata->mac_lock, flags);
984 
985 		smsc911x_phy_update_flowcontrol(pdata);
986 		pdata->last_duplex = phy_dev->duplex;
987 	}
988 
989 	carrier = netif_carrier_ok(dev);
990 	if (carrier != pdata->last_carrier) {
991 		SMSC_TRACE(pdata, hw, "carrier state has changed");
992 		if (carrier) {
993 			SMSC_TRACE(pdata, hw, "configuring for carrier OK");
994 			if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) &&
995 			    (!pdata->using_extphy)) {
996 				/* Restore original GPIO configuration */
997 				pdata->gpio_setting = pdata->gpio_orig_setting;
998 				smsc911x_reg_write(pdata, GPIO_CFG,
999 					pdata->gpio_setting);
1000 			}
1001 		} else {
1002 			SMSC_TRACE(pdata, hw, "configuring for no carrier");
1003 			/* Check global setting that LED1
1004 			 * usage is 10/100 indicator */
1005 			pdata->gpio_setting = smsc911x_reg_read(pdata,
1006 				GPIO_CFG);
1007 			if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) &&
1008 			    (!pdata->using_extphy)) {
1009 				/* Force 10/100 LED off, after saving
1010 				 * original GPIO configuration */
1011 				pdata->gpio_orig_setting = pdata->gpio_setting;
1012 
1013 				pdata->gpio_setting &= ~GPIO_CFG_LED1_EN_;
1014 				pdata->gpio_setting |= (GPIO_CFG_GPIOBUF0_
1015 							| GPIO_CFG_GPIODIR0_
1016 							| GPIO_CFG_GPIOD0_);
1017 				smsc911x_reg_write(pdata, GPIO_CFG,
1018 					pdata->gpio_setting);
1019 			}
1020 		}
1021 		pdata->last_carrier = carrier;
1022 	}
1023 }
1024 
1025 static int smsc911x_mii_probe(struct net_device *dev)
1026 {
1027 	struct smsc911x_data *pdata = netdev_priv(dev);
1028 	struct phy_device *phydev = NULL;
1029 	int ret;
1030 
1031 	/* find the first phy */
1032 	phydev = phy_find_first(pdata->mii_bus);
1033 	if (!phydev) {
1034 		netdev_err(dev, "no PHY found\n");
1035 		return -ENODEV;
1036 	}
1037 
1038 	SMSC_TRACE(pdata, probe, "PHY: addr %d, phy_id 0x%08X",
1039 		   phydev->mdio.addr, phydev->phy_id);
1040 
1041 	ret = phy_connect_direct(dev, phydev, &smsc911x_phy_adjust_link,
1042 				 pdata->config.phy_interface);
1043 
1044 	if (ret) {
1045 		netdev_err(dev, "Could not attach to PHY\n");
1046 		return ret;
1047 	}
1048 
1049 	phy_attached_info(phydev);
1050 
1051 	/* mask with MAC supported features */
1052 	phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
1053 			      SUPPORTED_Asym_Pause);
1054 	phydev->advertising = phydev->supported;
1055 
1056 	pdata->last_duplex = -1;
1057 	pdata->last_carrier = -1;
1058 
1059 #ifdef USE_PHY_WORK_AROUND
1060 	if (smsc911x_phy_loopbacktest(dev) < 0) {
1061 		SMSC_WARN(pdata, hw, "Failed Loop Back Test");
1062 		phy_disconnect(phydev);
1063 		return -ENODEV;
1064 	}
1065 	SMSC_TRACE(pdata, hw, "Passed Loop Back Test");
1066 #endif				/* USE_PHY_WORK_AROUND */
1067 
1068 	SMSC_TRACE(pdata, hw, "phy initialised successfully");
1069 	return 0;
1070 }
1071 
1072 static int smsc911x_mii_init(struct platform_device *pdev,
1073 			     struct net_device *dev)
1074 {
1075 	struct smsc911x_data *pdata = netdev_priv(dev);
1076 	int err = -ENXIO;
1077 
1078 	pdata->mii_bus = mdiobus_alloc();
1079 	if (!pdata->mii_bus) {
1080 		err = -ENOMEM;
1081 		goto err_out_1;
1082 	}
1083 
1084 	pdata->mii_bus->name = SMSC_MDIONAME;
1085 	snprintf(pdata->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
1086 		pdev->name, pdev->id);
1087 	pdata->mii_bus->priv = pdata;
1088 	pdata->mii_bus->read = smsc911x_mii_read;
1089 	pdata->mii_bus->write = smsc911x_mii_write;
1090 
1091 	pdata->mii_bus->parent = &pdev->dev;
1092 
1093 	switch (pdata->idrev & 0xFFFF0000) {
1094 	case 0x01170000:
1095 	case 0x01150000:
1096 	case 0x117A0000:
1097 	case 0x115A0000:
1098 		/* External PHY supported, try to autodetect */
1099 		smsc911x_phy_initialise_external(pdata);
1100 		break;
1101 	default:
1102 		SMSC_TRACE(pdata, hw, "External PHY is not supported, "
1103 			   "using internal PHY");
1104 		pdata->using_extphy = 0;
1105 		break;
1106 	}
1107 
1108 	if (!pdata->using_extphy) {
1109 		/* Mask all PHYs except ID 1 (internal) */
1110 		pdata->mii_bus->phy_mask = ~(1 << 1);
1111 	}
1112 
1113 	if (mdiobus_register(pdata->mii_bus)) {
1114 		SMSC_WARN(pdata, probe, "Error registering mii bus");
1115 		goto err_out_free_bus_2;
1116 	}
1117 
1118 	return 0;
1119 
1120 err_out_free_bus_2:
1121 	mdiobus_free(pdata->mii_bus);
1122 err_out_1:
1123 	return err;
1124 }
1125 
1126 /* Gets the number of tx statuses in the fifo */
1127 static unsigned int smsc911x_tx_get_txstatcount(struct smsc911x_data *pdata)
1128 {
1129 	return (smsc911x_reg_read(pdata, TX_FIFO_INF)
1130 		& TX_FIFO_INF_TSUSED_) >> 16;
1131 }
1132 
1133 /* Reads tx statuses and increments counters where necessary */
1134 static void smsc911x_tx_update_txcounters(struct net_device *dev)
1135 {
1136 	struct smsc911x_data *pdata = netdev_priv(dev);
1137 	unsigned int tx_stat;
1138 
1139 	while ((tx_stat = smsc911x_tx_get_txstatus(pdata)) != 0) {
1140 		if (unlikely(tx_stat & 0x80000000)) {
1141 			/* In this driver the packet tag is used as the packet
1142 			 * length. Since a packet length can never reach the
1143 			 * size of 0x8000, this bit is reserved. It is worth
1144 			 * noting that the "reserved bit" in the warning above
1145 			 * does not reference a hardware defined reserved bit
1146 			 * but rather a driver defined one.
1147 			 */
1148 			SMSC_WARN(pdata, hw, "Packet tag reserved bit is high");
1149 		} else {
1150 			if (unlikely(tx_stat & TX_STS_ES_)) {
1151 				dev->stats.tx_errors++;
1152 			} else {
1153 				dev->stats.tx_packets++;
1154 				dev->stats.tx_bytes += (tx_stat >> 16);
1155 			}
1156 			if (unlikely(tx_stat & TX_STS_EXCESS_COL_)) {
1157 				dev->stats.collisions += 16;
1158 				dev->stats.tx_aborted_errors += 1;
1159 			} else {
1160 				dev->stats.collisions +=
1161 				    ((tx_stat >> 3) & 0xF);
1162 			}
1163 			if (unlikely(tx_stat & TX_STS_LOST_CARRIER_))
1164 				dev->stats.tx_carrier_errors += 1;
1165 			if (unlikely(tx_stat & TX_STS_LATE_COL_)) {
1166 				dev->stats.collisions++;
1167 				dev->stats.tx_aborted_errors++;
1168 			}
1169 		}
1170 	}
1171 }
1172 
1173 /* Increments the Rx error counters */
1174 static void
1175 smsc911x_rx_counterrors(struct net_device *dev, unsigned int rxstat)
1176 {
1177 	int crc_err = 0;
1178 
1179 	if (unlikely(rxstat & RX_STS_ES_)) {
1180 		dev->stats.rx_errors++;
1181 		if (unlikely(rxstat & RX_STS_CRC_ERR_)) {
1182 			dev->stats.rx_crc_errors++;
1183 			crc_err = 1;
1184 		}
1185 	}
1186 	if (likely(!crc_err)) {
1187 		if (unlikely((rxstat & RX_STS_FRAME_TYPE_) &&
1188 			     (rxstat & RX_STS_LENGTH_ERR_)))
1189 			dev->stats.rx_length_errors++;
1190 		if (rxstat & RX_STS_MCAST_)
1191 			dev->stats.multicast++;
1192 	}
1193 }
1194 
1195 /* Quickly dumps bad packets */
1196 static void
1197 smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktwords)
1198 {
1199 	if (likely(pktwords >= 4)) {
1200 		unsigned int timeout = 500;
1201 		unsigned int val;
1202 		smsc911x_reg_write(pdata, RX_DP_CTRL, RX_DP_CTRL_RX_FFWD_);
1203 		do {
1204 			udelay(1);
1205 			val = smsc911x_reg_read(pdata, RX_DP_CTRL);
1206 		} while ((val & RX_DP_CTRL_RX_FFWD_) && --timeout);
1207 
1208 		if (unlikely(timeout == 0))
1209 			SMSC_WARN(pdata, hw, "Timed out waiting for "
1210 				  "RX FFWD to finish, RX_DP_CTRL: 0x%08X", val);
1211 	} else {
1212 		unsigned int temp;
1213 		while (pktwords--)
1214 			temp = smsc911x_reg_read(pdata, RX_DATA_FIFO);
1215 	}
1216 }
1217 
1218 /* NAPI poll function */
1219 static int smsc911x_poll(struct napi_struct *napi, int budget)
1220 {
1221 	struct smsc911x_data *pdata =
1222 		container_of(napi, struct smsc911x_data, napi);
1223 	struct net_device *dev = pdata->dev;
1224 	int npackets = 0;
1225 
1226 	while (npackets < budget) {
1227 		unsigned int pktlength;
1228 		unsigned int pktwords;
1229 		struct sk_buff *skb;
1230 		unsigned int rxstat = smsc911x_rx_get_rxstatus(pdata);
1231 
1232 		if (!rxstat) {
1233 			unsigned int temp;
1234 			/* We processed all packets available.  Tell NAPI it can
1235 			 * stop polling then re-enable rx interrupts */
1236 			smsc911x_reg_write(pdata, INT_STS, INT_STS_RSFL_);
1237 			napi_complete(napi);
1238 			temp = smsc911x_reg_read(pdata, INT_EN);
1239 			temp |= INT_EN_RSFL_EN_;
1240 			smsc911x_reg_write(pdata, INT_EN, temp);
1241 			break;
1242 		}
1243 
1244 		/* Count packet for NAPI scheduling, even if it has an error.
1245 		 * Error packets still require cycles to discard */
1246 		npackets++;
1247 
1248 		pktlength = ((rxstat & 0x3FFF0000) >> 16);
1249 		pktwords = (pktlength + NET_IP_ALIGN + 3) >> 2;
1250 		smsc911x_rx_counterrors(dev, rxstat);
1251 
1252 		if (unlikely(rxstat & RX_STS_ES_)) {
1253 			SMSC_WARN(pdata, rx_err,
1254 				  "Discarding packet with error bit set");
1255 			/* Packet has an error, discard it and continue with
1256 			 * the next */
1257 			smsc911x_rx_fastforward(pdata, pktwords);
1258 			dev->stats.rx_dropped++;
1259 			continue;
1260 		}
1261 
1262 		skb = netdev_alloc_skb(dev, pktwords << 2);
1263 		if (unlikely(!skb)) {
1264 			SMSC_WARN(pdata, rx_err,
1265 				  "Unable to allocate skb for rx packet");
1266 			/* Drop the packet and stop this polling iteration */
1267 			smsc911x_rx_fastforward(pdata, pktwords);
1268 			dev->stats.rx_dropped++;
1269 			break;
1270 		}
1271 
1272 		pdata->ops->rx_readfifo(pdata,
1273 				 (unsigned int *)skb->data, pktwords);
1274 
1275 		/* Align IP on 16B boundary */
1276 		skb_reserve(skb, NET_IP_ALIGN);
1277 		skb_put(skb, pktlength - 4);
1278 		skb->protocol = eth_type_trans(skb, dev);
1279 		skb_checksum_none_assert(skb);
1280 		netif_receive_skb(skb);
1281 
1282 		/* Update counters */
1283 		dev->stats.rx_packets++;
1284 		dev->stats.rx_bytes += (pktlength - 4);
1285 	}
1286 
1287 	/* Return total received packets */
1288 	return npackets;
1289 }
1290 
1291 /* Returns hash bit number for given MAC address
1292  * Example:
1293  * 01 00 5E 00 00 01 -> returns bit number 31 */
1294 static unsigned int smsc911x_hash(char addr[ETH_ALEN])
1295 {
1296 	return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f;
1297 }
1298 
1299 static void smsc911x_rx_multicast_update(struct smsc911x_data *pdata)
1300 {
1301 	/* Performs the multicast & mac_cr update.  This is called when
1302 	 * safe on the current hardware, and with the mac_lock held */
1303 	unsigned int mac_cr;
1304 
1305 	SMSC_ASSERT_MAC_LOCK(pdata);
1306 
1307 	mac_cr = smsc911x_mac_read(pdata, MAC_CR);
1308 	mac_cr |= pdata->set_bits_mask;
1309 	mac_cr &= ~(pdata->clear_bits_mask);
1310 	smsc911x_mac_write(pdata, MAC_CR, mac_cr);
1311 	smsc911x_mac_write(pdata, HASHH, pdata->hashhi);
1312 	smsc911x_mac_write(pdata, HASHL, pdata->hashlo);
1313 	SMSC_TRACE(pdata, hw, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X",
1314 		   mac_cr, pdata->hashhi, pdata->hashlo);
1315 }
1316 
1317 static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata)
1318 {
1319 	unsigned int mac_cr;
1320 
1321 	/* This function is only called for older LAN911x devices
1322 	 * (revA or revB), where MAC_CR, HASHH and HASHL should not
1323 	 * be modified during Rx - newer devices immediately update the
1324 	 * registers.
1325 	 *
1326 	 * This is called from interrupt context */
1327 
1328 	spin_lock(&pdata->mac_lock);
1329 
1330 	/* Check Rx has stopped */
1331 	if (smsc911x_mac_read(pdata, MAC_CR) & MAC_CR_RXEN_)
1332 		SMSC_WARN(pdata, drv, "Rx not stopped");
1333 
1334 	/* Perform the update - safe to do now Rx has stopped */
1335 	smsc911x_rx_multicast_update(pdata);
1336 
1337 	/* Re-enable Rx */
1338 	mac_cr = smsc911x_mac_read(pdata, MAC_CR);
1339 	mac_cr |= MAC_CR_RXEN_;
1340 	smsc911x_mac_write(pdata, MAC_CR, mac_cr);
1341 
1342 	pdata->multicast_update_pending = 0;
1343 
1344 	spin_unlock(&pdata->mac_lock);
1345 }
1346 
1347 static int smsc911x_phy_general_power_up(struct smsc911x_data *pdata)
1348 {
1349 	struct net_device *ndev = pdata->dev;
1350 	struct phy_device *phy_dev = ndev->phydev;
1351 	int rc = 0;
1352 
1353 	if (!phy_dev)
1354 		return rc;
1355 
1356 	/* If the internal PHY is in General Power-Down mode, all, except the
1357 	 * management interface, is powered-down and stays in that condition as
1358 	 * long as Phy register bit 0.11 is HIGH.
1359 	 *
1360 	 * In that case, clear the bit 0.11, so the PHY powers up and we can
1361 	 * access to the phy registers.
1362 	 */
1363 	rc = phy_read(phy_dev, MII_BMCR);
1364 	if (rc < 0) {
1365 		SMSC_WARN(pdata, drv, "Failed reading PHY control reg");
1366 		return rc;
1367 	}
1368 
1369 	/* If the PHY general power-down bit is not set is not necessary to
1370 	 * disable the general power down-mode.
1371 	 */
1372 	if (rc & BMCR_PDOWN) {
1373 		rc = phy_write(phy_dev, MII_BMCR, rc & ~BMCR_PDOWN);
1374 		if (rc < 0) {
1375 			SMSC_WARN(pdata, drv, "Failed writing PHY control reg");
1376 			return rc;
1377 		}
1378 
1379 		usleep_range(1000, 1500);
1380 	}
1381 
1382 	return 0;
1383 }
1384 
1385 static int smsc911x_phy_disable_energy_detect(struct smsc911x_data *pdata)
1386 {
1387 	struct net_device *ndev = pdata->dev;
1388 	struct phy_device *phy_dev = ndev->phydev;
1389 	int rc = 0;
1390 
1391 	if (!phy_dev)
1392 		return rc;
1393 
1394 	rc = phy_read(phy_dev, MII_LAN83C185_CTRL_STATUS);
1395 
1396 	if (rc < 0) {
1397 		SMSC_WARN(pdata, drv, "Failed reading PHY control reg");
1398 		return rc;
1399 	}
1400 
1401 	/* Only disable if energy detect mode is already enabled */
1402 	if (rc & MII_LAN83C185_EDPWRDOWN) {
1403 		/* Disable energy detect mode for this SMSC Transceivers */
1404 		rc = phy_write(phy_dev, MII_LAN83C185_CTRL_STATUS,
1405 			       rc & (~MII_LAN83C185_EDPWRDOWN));
1406 
1407 		if (rc < 0) {
1408 			SMSC_WARN(pdata, drv, "Failed writing PHY control reg");
1409 			return rc;
1410 		}
1411 		/* Allow PHY to wakeup */
1412 		mdelay(2);
1413 	}
1414 
1415 	return 0;
1416 }
1417 
1418 static int smsc911x_phy_enable_energy_detect(struct smsc911x_data *pdata)
1419 {
1420 	struct net_device *ndev = pdata->dev;
1421 	struct phy_device *phy_dev = ndev->phydev;
1422 	int rc = 0;
1423 
1424 	if (!phy_dev)
1425 		return rc;
1426 
1427 	rc = phy_read(phy_dev, MII_LAN83C185_CTRL_STATUS);
1428 
1429 	if (rc < 0) {
1430 		SMSC_WARN(pdata, drv, "Failed reading PHY control reg");
1431 		return rc;
1432 	}
1433 
1434 	/* Only enable if energy detect mode is already disabled */
1435 	if (!(rc & MII_LAN83C185_EDPWRDOWN)) {
1436 		/* Enable energy detect mode for this SMSC Transceivers */
1437 		rc = phy_write(phy_dev, MII_LAN83C185_CTRL_STATUS,
1438 			       rc | MII_LAN83C185_EDPWRDOWN);
1439 
1440 		if (rc < 0) {
1441 			SMSC_WARN(pdata, drv, "Failed writing PHY control reg");
1442 			return rc;
1443 		}
1444 	}
1445 	return 0;
1446 }
1447 
1448 static int smsc911x_soft_reset(struct smsc911x_data *pdata)
1449 {
1450 	unsigned int timeout;
1451 	unsigned int temp;
1452 	int ret;
1453 	unsigned int reset_offset = HW_CFG;
1454 	unsigned int reset_mask = HW_CFG_SRST_;
1455 
1456 	/*
1457 	 * Make sure to power-up the PHY chip before doing a reset, otherwise
1458 	 * the reset fails.
1459 	 */
1460 	ret = smsc911x_phy_general_power_up(pdata);
1461 	if (ret) {
1462 		SMSC_WARN(pdata, drv, "Failed to power-up the PHY chip");
1463 		return ret;
1464 	}
1465 
1466 	/*
1467 	 * LAN9210/LAN9211/LAN9220/LAN9221 chips have an internal PHY that
1468 	 * are initialized in a Energy Detect Power-Down mode that prevents
1469 	 * the MAC chip to be software reseted. So we have to wakeup the PHY
1470 	 * before.
1471 	 */
1472 	if (pdata->generation == 4) {
1473 		ret = smsc911x_phy_disable_energy_detect(pdata);
1474 
1475 		if (ret) {
1476 			SMSC_WARN(pdata, drv, "Failed to wakeup the PHY chip");
1477 			return ret;
1478 		}
1479 	}
1480 
1481 	if ((pdata->idrev & 0xFFFF0000) == LAN9250) {
1482 		/* special reset for  LAN9250 */
1483 		reset_offset = RESET_CTL;
1484 		reset_mask = RESET_CTL_DIGITAL_RST_;
1485 	}
1486 
1487 	/* Reset the LAN911x */
1488 	smsc911x_reg_write(pdata, reset_offset, reset_mask);
1489 
1490 	/* verify reset bit is cleared */
1491 	timeout = 10;
1492 	do {
1493 		udelay(10);
1494 		temp = smsc911x_reg_read(pdata, reset_offset);
1495 	} while ((--timeout) && (temp & reset_mask));
1496 
1497 	if (unlikely(temp & reset_mask)) {
1498 		SMSC_WARN(pdata, drv, "Failed to complete reset");
1499 		return -EIO;
1500 	}
1501 
1502 	if (pdata->generation == 4) {
1503 		ret = smsc911x_phy_enable_energy_detect(pdata);
1504 
1505 		if (ret) {
1506 			SMSC_WARN(pdata, drv, "Failed to wakeup the PHY chip");
1507 			return ret;
1508 		}
1509 	}
1510 
1511 	return 0;
1512 }
1513 
1514 /* Sets the device MAC address to dev_addr, called with mac_lock held */
1515 static void
1516 smsc911x_set_hw_mac_address(struct smsc911x_data *pdata, u8 dev_addr[6])
1517 {
1518 	u32 mac_high16 = (dev_addr[5] << 8) | dev_addr[4];
1519 	u32 mac_low32 = (dev_addr[3] << 24) | (dev_addr[2] << 16) |
1520 	    (dev_addr[1] << 8) | dev_addr[0];
1521 
1522 	SMSC_ASSERT_MAC_LOCK(pdata);
1523 
1524 	smsc911x_mac_write(pdata, ADDRH, mac_high16);
1525 	smsc911x_mac_write(pdata, ADDRL, mac_low32);
1526 }
1527 
1528 static void smsc911x_disable_irq_chip(struct net_device *dev)
1529 {
1530 	struct smsc911x_data *pdata = netdev_priv(dev);
1531 
1532 	smsc911x_reg_write(pdata, INT_EN, 0);
1533 	smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF);
1534 }
1535 
1536 static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id)
1537 {
1538 	struct net_device *dev = dev_id;
1539 	struct smsc911x_data *pdata = netdev_priv(dev);
1540 	u32 intsts = smsc911x_reg_read(pdata, INT_STS);
1541 	u32 inten = smsc911x_reg_read(pdata, INT_EN);
1542 	int serviced = IRQ_NONE;
1543 	u32 temp;
1544 
1545 	if (unlikely(intsts & inten & INT_STS_SW_INT_)) {
1546 		temp = smsc911x_reg_read(pdata, INT_EN);
1547 		temp &= (~INT_EN_SW_INT_EN_);
1548 		smsc911x_reg_write(pdata, INT_EN, temp);
1549 		smsc911x_reg_write(pdata, INT_STS, INT_STS_SW_INT_);
1550 		pdata->software_irq_signal = 1;
1551 		smp_wmb();
1552 		serviced = IRQ_HANDLED;
1553 	}
1554 
1555 	if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) {
1556 		/* Called when there is a multicast update scheduled and
1557 		 * it is now safe to complete the update */
1558 		SMSC_TRACE(pdata, intr, "RX Stop interrupt");
1559 		smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_);
1560 		if (pdata->multicast_update_pending)
1561 			smsc911x_rx_multicast_update_workaround(pdata);
1562 		serviced = IRQ_HANDLED;
1563 	}
1564 
1565 	if (intsts & inten & INT_STS_TDFA_) {
1566 		temp = smsc911x_reg_read(pdata, FIFO_INT);
1567 		temp |= FIFO_INT_TX_AVAIL_LEVEL_;
1568 		smsc911x_reg_write(pdata, FIFO_INT, temp);
1569 		smsc911x_reg_write(pdata, INT_STS, INT_STS_TDFA_);
1570 		netif_wake_queue(dev);
1571 		serviced = IRQ_HANDLED;
1572 	}
1573 
1574 	if (unlikely(intsts & inten & INT_STS_RXE_)) {
1575 		SMSC_TRACE(pdata, intr, "RX Error interrupt");
1576 		smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_);
1577 		serviced = IRQ_HANDLED;
1578 	}
1579 
1580 	if (likely(intsts & inten & INT_STS_RSFL_)) {
1581 		if (likely(napi_schedule_prep(&pdata->napi))) {
1582 			/* Disable Rx interrupts */
1583 			temp = smsc911x_reg_read(pdata, INT_EN);
1584 			temp &= (~INT_EN_RSFL_EN_);
1585 			smsc911x_reg_write(pdata, INT_EN, temp);
1586 			/* Schedule a NAPI poll */
1587 			__napi_schedule(&pdata->napi);
1588 		} else {
1589 			SMSC_WARN(pdata, rx_err, "napi_schedule_prep failed");
1590 		}
1591 		serviced = IRQ_HANDLED;
1592 	}
1593 
1594 	return serviced;
1595 }
1596 
1597 static int smsc911x_open(struct net_device *dev)
1598 {
1599 	struct smsc911x_data *pdata = netdev_priv(dev);
1600 	unsigned int timeout;
1601 	unsigned int temp;
1602 	unsigned int intcfg;
1603 	int retval;
1604 	int irq_flags;
1605 
1606 	/* find and start the given phy */
1607 	if (!dev->phydev) {
1608 		retval = smsc911x_mii_probe(dev);
1609 		if (retval < 0) {
1610 			SMSC_WARN(pdata, probe, "Error starting phy");
1611 			goto out;
1612 		}
1613 	}
1614 
1615 	/* Reset the LAN911x */
1616 	retval = smsc911x_soft_reset(pdata);
1617 	if (retval) {
1618 		SMSC_WARN(pdata, hw, "soft reset failed");
1619 		goto mii_free_out;
1620 	}
1621 
1622 	smsc911x_reg_write(pdata, HW_CFG, 0x00050000);
1623 	smsc911x_reg_write(pdata, AFC_CFG, 0x006E3740);
1624 
1625 	/* Increase the legal frame size of VLAN tagged frames to 1522 bytes */
1626 	spin_lock_irq(&pdata->mac_lock);
1627 	smsc911x_mac_write(pdata, VLAN1, ETH_P_8021Q);
1628 	spin_unlock_irq(&pdata->mac_lock);
1629 
1630 	/* Make sure EEPROM has finished loading before setting GPIO_CFG */
1631 	timeout = 50;
1632 	while ((smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) &&
1633 	       --timeout) {
1634 		udelay(10);
1635 	}
1636 
1637 	if (unlikely(timeout == 0))
1638 		SMSC_WARN(pdata, ifup,
1639 			  "Timed out waiting for EEPROM busy bit to clear");
1640 
1641 	smsc911x_reg_write(pdata, GPIO_CFG, 0x70070000);
1642 
1643 	/* The soft reset above cleared the device's MAC address,
1644 	 * restore it from local copy (set in probe) */
1645 	spin_lock_irq(&pdata->mac_lock);
1646 	smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
1647 	spin_unlock_irq(&pdata->mac_lock);
1648 
1649 	/* Initialise irqs, but leave all sources disabled */
1650 	smsc911x_disable_irq_chip(dev);
1651 
1652 	/* Set interrupt deassertion to 100uS */
1653 	intcfg = ((10 << 24) | INT_CFG_IRQ_EN_);
1654 
1655 	if (pdata->config.irq_polarity) {
1656 		SMSC_TRACE(pdata, ifup, "irq polarity: active high");
1657 		intcfg |= INT_CFG_IRQ_POL_;
1658 	} else {
1659 		SMSC_TRACE(pdata, ifup, "irq polarity: active low");
1660 	}
1661 
1662 	if (pdata->config.irq_type) {
1663 		SMSC_TRACE(pdata, ifup, "irq type: push-pull");
1664 		intcfg |= INT_CFG_IRQ_TYPE_;
1665 	} else {
1666 		SMSC_TRACE(pdata, ifup, "irq type: open drain");
1667 	}
1668 
1669 	smsc911x_reg_write(pdata, INT_CFG, intcfg);
1670 
1671 	SMSC_TRACE(pdata, ifup, "Testing irq handler using IRQ %d", dev->irq);
1672 	pdata->software_irq_signal = 0;
1673 	smp_wmb();
1674 
1675 	irq_flags = irq_get_trigger_type(dev->irq);
1676 	retval = request_irq(dev->irq, smsc911x_irqhandler,
1677 			     irq_flags | IRQF_SHARED, dev->name, dev);
1678 	if (retval) {
1679 		SMSC_WARN(pdata, probe,
1680 			  "Unable to claim requested irq: %d", dev->irq);
1681 		goto mii_free_out;
1682 	}
1683 
1684 	temp = smsc911x_reg_read(pdata, INT_EN);
1685 	temp |= INT_EN_SW_INT_EN_;
1686 	smsc911x_reg_write(pdata, INT_EN, temp);
1687 
1688 	timeout = 1000;
1689 	while (timeout--) {
1690 		if (pdata->software_irq_signal)
1691 			break;
1692 		msleep(1);
1693 	}
1694 
1695 	if (!pdata->software_irq_signal) {
1696 		netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n",
1697 			    dev->irq);
1698 		retval = -ENODEV;
1699 		goto irq_stop_out;
1700 	}
1701 	SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d",
1702 		   dev->irq);
1703 
1704 	netdev_info(dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n",
1705 		    (unsigned long)pdata->ioaddr, dev->irq);
1706 
1707 	/* Reset the last known duplex and carrier */
1708 	pdata->last_duplex = -1;
1709 	pdata->last_carrier = -1;
1710 
1711 	/* Bring the PHY up */
1712 	phy_start(dev->phydev);
1713 
1714 	temp = smsc911x_reg_read(pdata, HW_CFG);
1715 	/* Preserve TX FIFO size and external PHY configuration */
1716 	temp &= (HW_CFG_TX_FIF_SZ_|0x00000FFF);
1717 	temp |= HW_CFG_SF_;
1718 	smsc911x_reg_write(pdata, HW_CFG, temp);
1719 
1720 	temp = smsc911x_reg_read(pdata, FIFO_INT);
1721 	temp |= FIFO_INT_TX_AVAIL_LEVEL_;
1722 	temp &= ~(FIFO_INT_RX_STS_LEVEL_);
1723 	smsc911x_reg_write(pdata, FIFO_INT, temp);
1724 
1725 	/* set RX Data offset to 2 bytes for alignment */
1726 	smsc911x_reg_write(pdata, RX_CFG, (NET_IP_ALIGN << 8));
1727 
1728 	/* enable NAPI polling before enabling RX interrupts */
1729 	napi_enable(&pdata->napi);
1730 
1731 	temp = smsc911x_reg_read(pdata, INT_EN);
1732 	temp |= (INT_EN_TDFA_EN_ | INT_EN_RSFL_EN_ | INT_EN_RXSTOP_INT_EN_);
1733 	smsc911x_reg_write(pdata, INT_EN, temp);
1734 
1735 	spin_lock_irq(&pdata->mac_lock);
1736 	temp = smsc911x_mac_read(pdata, MAC_CR);
1737 	temp |= (MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_);
1738 	smsc911x_mac_write(pdata, MAC_CR, temp);
1739 	spin_unlock_irq(&pdata->mac_lock);
1740 
1741 	smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_);
1742 
1743 	netif_start_queue(dev);
1744 	return 0;
1745 
1746 irq_stop_out:
1747 	free_irq(dev->irq, dev);
1748 mii_free_out:
1749 	phy_disconnect(dev->phydev);
1750 	dev->phydev = NULL;
1751 out:
1752 	return retval;
1753 }
1754 
1755 /* Entry point for stopping the interface */
1756 static int smsc911x_stop(struct net_device *dev)
1757 {
1758 	struct smsc911x_data *pdata = netdev_priv(dev);
1759 	unsigned int temp;
1760 
1761 	/* Disable all device interrupts */
1762 	temp = smsc911x_reg_read(pdata, INT_CFG);
1763 	temp &= ~INT_CFG_IRQ_EN_;
1764 	smsc911x_reg_write(pdata, INT_CFG, temp);
1765 
1766 	/* Stop Tx and Rx polling */
1767 	netif_stop_queue(dev);
1768 	napi_disable(&pdata->napi);
1769 
1770 	/* At this point all Rx and Tx activity is stopped */
1771 	dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP);
1772 	smsc911x_tx_update_txcounters(dev);
1773 
1774 	free_irq(dev->irq, dev);
1775 
1776 	/* Bring the PHY down */
1777 	if (dev->phydev) {
1778 		phy_stop(dev->phydev);
1779 		phy_disconnect(dev->phydev);
1780 		dev->phydev = NULL;
1781 	}
1782 	netif_carrier_off(dev);
1783 
1784 	SMSC_TRACE(pdata, ifdown, "Interface stopped");
1785 	return 0;
1786 }
1787 
1788 /* Entry point for transmitting a packet */
1789 static int smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
1790 {
1791 	struct smsc911x_data *pdata = netdev_priv(dev);
1792 	unsigned int freespace;
1793 	unsigned int tx_cmd_a;
1794 	unsigned int tx_cmd_b;
1795 	unsigned int temp;
1796 	u32 wrsz;
1797 	ulong bufp;
1798 
1799 	freespace = smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TDFREE_;
1800 
1801 	if (unlikely(freespace < TX_FIFO_LOW_THRESHOLD))
1802 		SMSC_WARN(pdata, tx_err,
1803 			  "Tx data fifo low, space available: %d", freespace);
1804 
1805 	/* Word alignment adjustment */
1806 	tx_cmd_a = (u32)((ulong)skb->data & 0x03) << 16;
1807 	tx_cmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_;
1808 	tx_cmd_a |= (unsigned int)skb->len;
1809 
1810 	tx_cmd_b = ((unsigned int)skb->len) << 16;
1811 	tx_cmd_b |= (unsigned int)skb->len;
1812 
1813 	smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_a);
1814 	smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_b);
1815 
1816 	bufp = (ulong)skb->data & (~0x3);
1817 	wrsz = (u32)skb->len + 3;
1818 	wrsz += (u32)((ulong)skb->data & 0x3);
1819 	wrsz >>= 2;
1820 
1821 	pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
1822 	freespace -= (skb->len + 32);
1823 	skb_tx_timestamp(skb);
1824 	dev_consume_skb_any(skb);
1825 
1826 	if (unlikely(smsc911x_tx_get_txstatcount(pdata) >= 30))
1827 		smsc911x_tx_update_txcounters(dev);
1828 
1829 	if (freespace < TX_FIFO_LOW_THRESHOLD) {
1830 		netif_stop_queue(dev);
1831 		temp = smsc911x_reg_read(pdata, FIFO_INT);
1832 		temp &= 0x00FFFFFF;
1833 		temp |= 0x32000000;
1834 		smsc911x_reg_write(pdata, FIFO_INT, temp);
1835 	}
1836 
1837 	return NETDEV_TX_OK;
1838 }
1839 
1840 /* Entry point for getting status counters */
1841 static struct net_device_stats *smsc911x_get_stats(struct net_device *dev)
1842 {
1843 	struct smsc911x_data *pdata = netdev_priv(dev);
1844 	smsc911x_tx_update_txcounters(dev);
1845 	dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP);
1846 	return &dev->stats;
1847 }
1848 
1849 /* Entry point for setting addressing modes */
1850 static void smsc911x_set_multicast_list(struct net_device *dev)
1851 {
1852 	struct smsc911x_data *pdata = netdev_priv(dev);
1853 	unsigned long flags;
1854 
1855 	if (dev->flags & IFF_PROMISC) {
1856 		/* Enabling promiscuous mode */
1857 		pdata->set_bits_mask = MAC_CR_PRMS_;
1858 		pdata->clear_bits_mask = (MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
1859 		pdata->hashhi = 0;
1860 		pdata->hashlo = 0;
1861 	} else if (dev->flags & IFF_ALLMULTI) {
1862 		/* Enabling all multicast mode */
1863 		pdata->set_bits_mask = MAC_CR_MCPAS_;
1864 		pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_HPFILT_);
1865 		pdata->hashhi = 0;
1866 		pdata->hashlo = 0;
1867 	} else if (!netdev_mc_empty(dev)) {
1868 		/* Enabling specific multicast addresses */
1869 		unsigned int hash_high = 0;
1870 		unsigned int hash_low = 0;
1871 		struct netdev_hw_addr *ha;
1872 
1873 		pdata->set_bits_mask = MAC_CR_HPFILT_;
1874 		pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_MCPAS_);
1875 
1876 		netdev_for_each_mc_addr(ha, dev) {
1877 			unsigned int bitnum = smsc911x_hash(ha->addr);
1878 			unsigned int mask = 0x01 << (bitnum & 0x1F);
1879 
1880 			if (bitnum & 0x20)
1881 				hash_high |= mask;
1882 			else
1883 				hash_low |= mask;
1884 		}
1885 
1886 		pdata->hashhi = hash_high;
1887 		pdata->hashlo = hash_low;
1888 	} else {
1889 		/* Enabling local MAC address only */
1890 		pdata->set_bits_mask = 0;
1891 		pdata->clear_bits_mask =
1892 		    (MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
1893 		pdata->hashhi = 0;
1894 		pdata->hashlo = 0;
1895 	}
1896 
1897 	spin_lock_irqsave(&pdata->mac_lock, flags);
1898 
1899 	if (pdata->generation <= 1) {
1900 		/* Older hardware revision - cannot change these flags while
1901 		 * receiving data */
1902 		if (!pdata->multicast_update_pending) {
1903 			unsigned int temp;
1904 			SMSC_TRACE(pdata, hw, "scheduling mcast update");
1905 			pdata->multicast_update_pending = 1;
1906 
1907 			/* Request the hardware to stop, then perform the
1908 			 * update when we get an RX_STOP interrupt */
1909 			temp = smsc911x_mac_read(pdata, MAC_CR);
1910 			temp &= ~(MAC_CR_RXEN_);
1911 			smsc911x_mac_write(pdata, MAC_CR, temp);
1912 		} else {
1913 			/* There is another update pending, this should now
1914 			 * use the newer values */
1915 		}
1916 	} else {
1917 		/* Newer hardware revision - can write immediately */
1918 		smsc911x_rx_multicast_update(pdata);
1919 	}
1920 
1921 	spin_unlock_irqrestore(&pdata->mac_lock, flags);
1922 }
1923 
1924 #ifdef CONFIG_NET_POLL_CONTROLLER
1925 static void smsc911x_poll_controller(struct net_device *dev)
1926 {
1927 	disable_irq(dev->irq);
1928 	smsc911x_irqhandler(0, dev);
1929 	enable_irq(dev->irq);
1930 }
1931 #endif				/* CONFIG_NET_POLL_CONTROLLER */
1932 
1933 static int smsc911x_set_mac_address(struct net_device *dev, void *p)
1934 {
1935 	struct smsc911x_data *pdata = netdev_priv(dev);
1936 	struct sockaddr *addr = p;
1937 
1938 	/* On older hardware revisions we cannot change the mac address
1939 	 * registers while receiving data.  Newer devices can safely change
1940 	 * this at any time. */
1941 	if (pdata->generation <= 1 && netif_running(dev))
1942 		return -EBUSY;
1943 
1944 	if (!is_valid_ether_addr(addr->sa_data))
1945 		return -EADDRNOTAVAIL;
1946 
1947 	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
1948 
1949 	spin_lock_irq(&pdata->mac_lock);
1950 	smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
1951 	spin_unlock_irq(&pdata->mac_lock);
1952 
1953 	netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr);
1954 
1955 	return 0;
1956 }
1957 
1958 /* Standard ioctls for mii-tool */
1959 static int smsc911x_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1960 {
1961 	if (!netif_running(dev) || !dev->phydev)
1962 		return -EINVAL;
1963 
1964 	return phy_mii_ioctl(dev->phydev, ifr, cmd);
1965 }
1966 
1967 static void smsc911x_ethtool_getdrvinfo(struct net_device *dev,
1968 					struct ethtool_drvinfo *info)
1969 {
1970 	strlcpy(info->driver, SMSC_CHIPNAME, sizeof(info->driver));
1971 	strlcpy(info->version, SMSC_DRV_VERSION, sizeof(info->version));
1972 	strlcpy(info->bus_info, dev_name(dev->dev.parent),
1973 		sizeof(info->bus_info));
1974 }
1975 
1976 static u32 smsc911x_ethtool_getmsglevel(struct net_device *dev)
1977 {
1978 	struct smsc911x_data *pdata = netdev_priv(dev);
1979 	return pdata->msg_enable;
1980 }
1981 
1982 static void smsc911x_ethtool_setmsglevel(struct net_device *dev, u32 level)
1983 {
1984 	struct smsc911x_data *pdata = netdev_priv(dev);
1985 	pdata->msg_enable = level;
1986 }
1987 
1988 static int smsc911x_ethtool_getregslen(struct net_device *dev)
1989 {
1990 	return (((E2P_DATA - ID_REV) / 4 + 1) + (WUCSR - MAC_CR) + 1 + 32) *
1991 	    sizeof(u32);
1992 }
1993 
1994 static void
1995 smsc911x_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs,
1996 			 void *buf)
1997 {
1998 	struct smsc911x_data *pdata = netdev_priv(dev);
1999 	struct phy_device *phy_dev = dev->phydev;
2000 	unsigned long flags;
2001 	unsigned int i;
2002 	unsigned int j = 0;
2003 	u32 *data = buf;
2004 
2005 	regs->version = pdata->idrev;
2006 	for (i = ID_REV; i <= E2P_DATA; i += (sizeof(u32)))
2007 		data[j++] = smsc911x_reg_read(pdata, i);
2008 
2009 	for (i = MAC_CR; i <= WUCSR; i++) {
2010 		spin_lock_irqsave(&pdata->mac_lock, flags);
2011 		data[j++] = smsc911x_mac_read(pdata, i);
2012 		spin_unlock_irqrestore(&pdata->mac_lock, flags);
2013 	}
2014 
2015 	for (i = 0; i <= 31; i++)
2016 		data[j++] = smsc911x_mii_read(phy_dev->mdio.bus,
2017 					      phy_dev->mdio.addr, i);
2018 }
2019 
2020 static void smsc911x_eeprom_enable_access(struct smsc911x_data *pdata)
2021 {
2022 	unsigned int temp = smsc911x_reg_read(pdata, GPIO_CFG);
2023 	temp &= ~GPIO_CFG_EEPR_EN_;
2024 	smsc911x_reg_write(pdata, GPIO_CFG, temp);
2025 	msleep(1);
2026 }
2027 
2028 static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op)
2029 {
2030 	int timeout = 100;
2031 	u32 e2cmd;
2032 
2033 	SMSC_TRACE(pdata, drv, "op 0x%08x", op);
2034 	if (smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) {
2035 		SMSC_WARN(pdata, drv, "Busy at start");
2036 		return -EBUSY;
2037 	}
2038 
2039 	e2cmd = op | E2P_CMD_EPC_BUSY_;
2040 	smsc911x_reg_write(pdata, E2P_CMD, e2cmd);
2041 
2042 	do {
2043 		msleep(1);
2044 		e2cmd = smsc911x_reg_read(pdata, E2P_CMD);
2045 	} while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout));
2046 
2047 	if (!timeout) {
2048 		SMSC_TRACE(pdata, drv, "TIMED OUT");
2049 		return -EAGAIN;
2050 	}
2051 
2052 	if (e2cmd & E2P_CMD_EPC_TIMEOUT_) {
2053 		SMSC_TRACE(pdata, drv, "Error occurred during eeprom operation");
2054 		return -EINVAL;
2055 	}
2056 
2057 	return 0;
2058 }
2059 
2060 static int smsc911x_eeprom_read_location(struct smsc911x_data *pdata,
2061 					 u8 address, u8 *data)
2062 {
2063 	u32 op = E2P_CMD_EPC_CMD_READ_ | address;
2064 	int ret;
2065 
2066 	SMSC_TRACE(pdata, drv, "address 0x%x", address);
2067 	ret = smsc911x_eeprom_send_cmd(pdata, op);
2068 
2069 	if (!ret)
2070 		data[address] = smsc911x_reg_read(pdata, E2P_DATA);
2071 
2072 	return ret;
2073 }
2074 
2075 static int smsc911x_eeprom_write_location(struct smsc911x_data *pdata,
2076 					  u8 address, u8 data)
2077 {
2078 	u32 op = E2P_CMD_EPC_CMD_ERASE_ | address;
2079 	u32 temp;
2080 	int ret;
2081 
2082 	SMSC_TRACE(pdata, drv, "address 0x%x, data 0x%x", address, data);
2083 	ret = smsc911x_eeprom_send_cmd(pdata, op);
2084 
2085 	if (!ret) {
2086 		op = E2P_CMD_EPC_CMD_WRITE_ | address;
2087 		smsc911x_reg_write(pdata, E2P_DATA, (u32)data);
2088 
2089 		/* Workaround for hardware read-after-write restriction */
2090 		temp = smsc911x_reg_read(pdata, BYTE_TEST);
2091 
2092 		ret = smsc911x_eeprom_send_cmd(pdata, op);
2093 	}
2094 
2095 	return ret;
2096 }
2097 
2098 static int smsc911x_ethtool_get_eeprom_len(struct net_device *dev)
2099 {
2100 	return SMSC911X_EEPROM_SIZE;
2101 }
2102 
2103 static int smsc911x_ethtool_get_eeprom(struct net_device *dev,
2104 				       struct ethtool_eeprom *eeprom, u8 *data)
2105 {
2106 	struct smsc911x_data *pdata = netdev_priv(dev);
2107 	u8 eeprom_data[SMSC911X_EEPROM_SIZE];
2108 	int len;
2109 	int i;
2110 
2111 	smsc911x_eeprom_enable_access(pdata);
2112 
2113 	len = min(eeprom->len, SMSC911X_EEPROM_SIZE);
2114 	for (i = 0; i < len; i++) {
2115 		int ret = smsc911x_eeprom_read_location(pdata, i, eeprom_data);
2116 		if (ret < 0) {
2117 			eeprom->len = 0;
2118 			return ret;
2119 		}
2120 	}
2121 
2122 	memcpy(data, &eeprom_data[eeprom->offset], len);
2123 	eeprom->len = len;
2124 	return 0;
2125 }
2126 
2127 static int smsc911x_ethtool_set_eeprom(struct net_device *dev,
2128 				       struct ethtool_eeprom *eeprom, u8 *data)
2129 {
2130 	int ret;
2131 	struct smsc911x_data *pdata = netdev_priv(dev);
2132 
2133 	smsc911x_eeprom_enable_access(pdata);
2134 	smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWEN_);
2135 	ret = smsc911x_eeprom_write_location(pdata, eeprom->offset, *data);
2136 	smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWDS_);
2137 
2138 	/* Single byte write, according to man page */
2139 	eeprom->len = 1;
2140 
2141 	return ret;
2142 }
2143 
2144 static const struct ethtool_ops smsc911x_ethtool_ops = {
2145 	.get_link = ethtool_op_get_link,
2146 	.get_drvinfo = smsc911x_ethtool_getdrvinfo,
2147 	.nway_reset = phy_ethtool_nway_reset,
2148 	.get_msglevel = smsc911x_ethtool_getmsglevel,
2149 	.set_msglevel = smsc911x_ethtool_setmsglevel,
2150 	.get_regs_len = smsc911x_ethtool_getregslen,
2151 	.get_regs = smsc911x_ethtool_getregs,
2152 	.get_eeprom_len = smsc911x_ethtool_get_eeprom_len,
2153 	.get_eeprom = smsc911x_ethtool_get_eeprom,
2154 	.set_eeprom = smsc911x_ethtool_set_eeprom,
2155 	.get_ts_info = ethtool_op_get_ts_info,
2156 	.get_link_ksettings = phy_ethtool_get_link_ksettings,
2157 	.set_link_ksettings = phy_ethtool_set_link_ksettings,
2158 };
2159 
2160 static const struct net_device_ops smsc911x_netdev_ops = {
2161 	.ndo_open		= smsc911x_open,
2162 	.ndo_stop		= smsc911x_stop,
2163 	.ndo_start_xmit		= smsc911x_hard_start_xmit,
2164 	.ndo_get_stats		= smsc911x_get_stats,
2165 	.ndo_set_rx_mode	= smsc911x_set_multicast_list,
2166 	.ndo_do_ioctl		= smsc911x_do_ioctl,
2167 	.ndo_validate_addr	= eth_validate_addr,
2168 	.ndo_set_mac_address 	= smsc911x_set_mac_address,
2169 #ifdef CONFIG_NET_POLL_CONTROLLER
2170 	.ndo_poll_controller	= smsc911x_poll_controller,
2171 #endif
2172 };
2173 
2174 /* copies the current mac address from hardware to dev->dev_addr */
2175 static void smsc911x_read_mac_address(struct net_device *dev)
2176 {
2177 	struct smsc911x_data *pdata = netdev_priv(dev);
2178 	u32 mac_high16 = smsc911x_mac_read(pdata, ADDRH);
2179 	u32 mac_low32 = smsc911x_mac_read(pdata, ADDRL);
2180 
2181 	dev->dev_addr[0] = (u8)(mac_low32);
2182 	dev->dev_addr[1] = (u8)(mac_low32 >> 8);
2183 	dev->dev_addr[2] = (u8)(mac_low32 >> 16);
2184 	dev->dev_addr[3] = (u8)(mac_low32 >> 24);
2185 	dev->dev_addr[4] = (u8)(mac_high16);
2186 	dev->dev_addr[5] = (u8)(mac_high16 >> 8);
2187 }
2188 
2189 /* Initializing private device structures, only called from probe */
2190 static int smsc911x_init(struct net_device *dev)
2191 {
2192 	struct smsc911x_data *pdata = netdev_priv(dev);
2193 	unsigned int byte_test, mask;
2194 	unsigned int to = 100;
2195 
2196 	SMSC_TRACE(pdata, probe, "Driver Parameters:");
2197 	SMSC_TRACE(pdata, probe, "LAN base: 0x%08lX",
2198 		   (unsigned long)pdata->ioaddr);
2199 	SMSC_TRACE(pdata, probe, "IRQ: %d", dev->irq);
2200 	SMSC_TRACE(pdata, probe, "PHY will be autodetected.");
2201 
2202 	spin_lock_init(&pdata->dev_lock);
2203 	spin_lock_init(&pdata->mac_lock);
2204 
2205 	if (pdata->ioaddr == NULL) {
2206 		SMSC_WARN(pdata, probe, "pdata->ioaddr: 0x00000000");
2207 		return -ENODEV;
2208 	}
2209 
2210 	/*
2211 	 * poll the READY bit in PMT_CTRL. Any other access to the device is
2212 	 * forbidden while this bit isn't set. Try for 100ms
2213 	 *
2214 	 * Note that this test is done before the WORD_SWAP register is
2215 	 * programmed. So in some configurations the READY bit is at 16 before
2216 	 * WORD_SWAP is written to. This issue is worked around by waiting
2217 	 * until either bit 0 or bit 16 gets set in PMT_CTRL.
2218 	 *
2219 	 * SMSC has confirmed that checking bit 16 (marked as reserved in
2220 	 * the datasheet) is fine since these bits "will either never be set
2221 	 * or can only go high after READY does (so also indicate the device
2222 	 * is ready)".
2223 	 */
2224 
2225 	mask = PMT_CTRL_READY_ | swahw32(PMT_CTRL_READY_);
2226 	while (!(smsc911x_reg_read(pdata, PMT_CTRL) & mask) && --to)
2227 		udelay(1000);
2228 
2229 	if (to == 0) {
2230 		netdev_err(dev, "Device not READY in 100ms aborting\n");
2231 		return -ENODEV;
2232 	}
2233 
2234 	/* Check byte ordering */
2235 	byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
2236 	SMSC_TRACE(pdata, probe, "BYTE_TEST: 0x%08X", byte_test);
2237 	if (byte_test == 0x43218765) {
2238 		SMSC_TRACE(pdata, probe, "BYTE_TEST looks swapped, "
2239 			   "applying WORD_SWAP");
2240 		smsc911x_reg_write(pdata, WORD_SWAP, 0xffffffff);
2241 
2242 		/* 1 dummy read of BYTE_TEST is needed after a write to
2243 		 * WORD_SWAP before its contents are valid */
2244 		byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
2245 
2246 		byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
2247 	}
2248 
2249 	if (byte_test != 0x87654321) {
2250 		SMSC_WARN(pdata, drv, "BYTE_TEST: 0x%08X", byte_test);
2251 		if (((byte_test >> 16) & 0xFFFF) == (byte_test & 0xFFFF)) {
2252 			SMSC_WARN(pdata, probe,
2253 				  "top 16 bits equal to bottom 16 bits");
2254 			SMSC_TRACE(pdata, probe,
2255 				   "This may mean the chip is set "
2256 				   "for 32 bit while the bus is reading 16 bit");
2257 		}
2258 		return -ENODEV;
2259 	}
2260 
2261 	/* Default generation to zero (all workarounds apply) */
2262 	pdata->generation = 0;
2263 
2264 	pdata->idrev = smsc911x_reg_read(pdata, ID_REV);
2265 	switch (pdata->idrev & 0xFFFF0000) {
2266 	case LAN9118:
2267 	case LAN9117:
2268 	case LAN9116:
2269 	case LAN9115:
2270 	case LAN89218:
2271 		/* LAN911[5678] family */
2272 		pdata->generation = pdata->idrev & 0x0000FFFF;
2273 		break;
2274 
2275 	case LAN9218:
2276 	case LAN9217:
2277 	case LAN9216:
2278 	case LAN9215:
2279 		/* LAN921[5678] family */
2280 		pdata->generation = 3;
2281 		break;
2282 
2283 	case LAN9210:
2284 	case LAN9211:
2285 	case LAN9220:
2286 	case LAN9221:
2287 	case LAN9250:
2288 		/* LAN9210/LAN9211/LAN9220/LAN9221/LAN9250 */
2289 		pdata->generation = 4;
2290 		break;
2291 
2292 	default:
2293 		SMSC_WARN(pdata, probe, "LAN911x not identified, idrev: 0x%08X",
2294 			  pdata->idrev);
2295 		return -ENODEV;
2296 	}
2297 
2298 	SMSC_TRACE(pdata, probe,
2299 		   "LAN911x identified, idrev: 0x%08X, generation: %d",
2300 		   pdata->idrev, pdata->generation);
2301 
2302 	if (pdata->generation == 0)
2303 		SMSC_WARN(pdata, probe,
2304 			  "This driver is not intended for this chip revision");
2305 
2306 	/* workaround for platforms without an eeprom, where the mac address
2307 	 * is stored elsewhere and set by the bootloader.  This saves the
2308 	 * mac address before resetting the device */
2309 	if (pdata->config.flags & SMSC911X_SAVE_MAC_ADDRESS) {
2310 		spin_lock_irq(&pdata->mac_lock);
2311 		smsc911x_read_mac_address(dev);
2312 		spin_unlock_irq(&pdata->mac_lock);
2313 	}
2314 
2315 	/* Reset the LAN911x */
2316 	if (smsc911x_phy_reset(pdata) || smsc911x_soft_reset(pdata))
2317 		return -ENODEV;
2318 
2319 	dev->flags |= IFF_MULTICAST;
2320 	netif_napi_add(dev, &pdata->napi, smsc911x_poll, SMSC_NAPI_WEIGHT);
2321 	dev->netdev_ops = &smsc911x_netdev_ops;
2322 	dev->ethtool_ops = &smsc911x_ethtool_ops;
2323 
2324 	return 0;
2325 }
2326 
2327 static int smsc911x_drv_remove(struct platform_device *pdev)
2328 {
2329 	struct net_device *dev;
2330 	struct smsc911x_data *pdata;
2331 	struct resource *res;
2332 
2333 	dev = platform_get_drvdata(pdev);
2334 	BUG_ON(!dev);
2335 	pdata = netdev_priv(dev);
2336 	BUG_ON(!pdata);
2337 	BUG_ON(!pdata->ioaddr);
2338 	WARN_ON(dev->phydev);
2339 
2340 	SMSC_TRACE(pdata, ifdown, "Stopping driver");
2341 
2342 	mdiobus_unregister(pdata->mii_bus);
2343 	mdiobus_free(pdata->mii_bus);
2344 
2345 	unregister_netdev(dev);
2346 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
2347 					   "smsc911x-memory");
2348 	if (!res)
2349 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2350 
2351 	release_mem_region(res->start, resource_size(res));
2352 
2353 	iounmap(pdata->ioaddr);
2354 
2355 	(void)smsc911x_disable_resources(pdev);
2356 	smsc911x_free_resources(pdev);
2357 
2358 	free_netdev(dev);
2359 
2360 	pm_runtime_put(&pdev->dev);
2361 	pm_runtime_disable(&pdev->dev);
2362 
2363 	return 0;
2364 }
2365 
2366 /* standard register acces */
2367 static const struct smsc911x_ops standard_smsc911x_ops = {
2368 	.reg_read = __smsc911x_reg_read,
2369 	.reg_write = __smsc911x_reg_write,
2370 	.rx_readfifo = smsc911x_rx_readfifo,
2371 	.tx_writefifo = smsc911x_tx_writefifo,
2372 };
2373 
2374 /* shifted register access */
2375 static const struct smsc911x_ops shifted_smsc911x_ops = {
2376 	.reg_read = __smsc911x_reg_read_shift,
2377 	.reg_write = __smsc911x_reg_write_shift,
2378 	.rx_readfifo = smsc911x_rx_readfifo_shift,
2379 	.tx_writefifo = smsc911x_tx_writefifo_shift,
2380 };
2381 
2382 static int smsc911x_probe_config(struct smsc911x_platform_config *config,
2383 				 struct device *dev)
2384 {
2385 	int phy_interface;
2386 	u32 width = 0;
2387 	int err;
2388 
2389 	phy_interface = device_get_phy_mode(dev);
2390 	if (phy_interface < 0)
2391 		phy_interface = PHY_INTERFACE_MODE_NA;
2392 	config->phy_interface = phy_interface;
2393 
2394 	device_get_mac_address(dev, config->mac, ETH_ALEN);
2395 
2396 	err = device_property_read_u32(dev, "reg-io-width", &width);
2397 	if (err == -ENXIO)
2398 		return err;
2399 	if (!err && width == 4)
2400 		config->flags |= SMSC911X_USE_32BIT;
2401 	else
2402 		config->flags |= SMSC911X_USE_16BIT;
2403 
2404 	device_property_read_u32(dev, "reg-shift", &config->shift);
2405 
2406 	if (device_property_present(dev, "smsc,irq-active-high"))
2407 		config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH;
2408 
2409 	if (device_property_present(dev, "smsc,irq-push-pull"))
2410 		config->irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL;
2411 
2412 	if (device_property_present(dev, "smsc,force-internal-phy"))
2413 		config->flags |= SMSC911X_FORCE_INTERNAL_PHY;
2414 
2415 	if (device_property_present(dev, "smsc,force-external-phy"))
2416 		config->flags |= SMSC911X_FORCE_EXTERNAL_PHY;
2417 
2418 	if (device_property_present(dev, "smsc,save-mac-address"))
2419 		config->flags |= SMSC911X_SAVE_MAC_ADDRESS;
2420 
2421 	return 0;
2422 }
2423 
2424 static int smsc911x_drv_probe(struct platform_device *pdev)
2425 {
2426 	struct net_device *dev;
2427 	struct smsc911x_data *pdata;
2428 	struct smsc911x_platform_config *config = dev_get_platdata(&pdev->dev);
2429 	struct resource *res;
2430 	int res_size, irq;
2431 	int retval;
2432 
2433 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
2434 					   "smsc911x-memory");
2435 	if (!res)
2436 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2437 	if (!res) {
2438 		pr_warn("Could not allocate resource\n");
2439 		retval = -ENODEV;
2440 		goto out_0;
2441 	}
2442 	res_size = resource_size(res);
2443 
2444 	irq = platform_get_irq(pdev, 0);
2445 	if (irq == -EPROBE_DEFER) {
2446 		retval = -EPROBE_DEFER;
2447 		goto out_0;
2448 	} else if (irq <= 0) {
2449 		pr_warn("Could not allocate irq resource\n");
2450 		retval = -ENODEV;
2451 		goto out_0;
2452 	}
2453 
2454 	if (!request_mem_region(res->start, res_size, SMSC_CHIPNAME)) {
2455 		retval = -EBUSY;
2456 		goto out_0;
2457 	}
2458 
2459 	dev = alloc_etherdev(sizeof(struct smsc911x_data));
2460 	if (!dev) {
2461 		retval = -ENOMEM;
2462 		goto out_release_io_1;
2463 	}
2464 
2465 	SET_NETDEV_DEV(dev, &pdev->dev);
2466 
2467 	pdata = netdev_priv(dev);
2468 	dev->irq = irq;
2469 	pdata->ioaddr = ioremap_nocache(res->start, res_size);
2470 	if (!pdata->ioaddr) {
2471 		retval = -ENOMEM;
2472 		goto out_ioremap_fail;
2473 	}
2474 
2475 	pdata->dev = dev;
2476 	pdata->msg_enable = ((1 << debug) - 1);
2477 
2478 	platform_set_drvdata(pdev, dev);
2479 
2480 	retval = smsc911x_request_resources(pdev);
2481 	if (retval)
2482 		goto out_request_resources_fail;
2483 
2484 	retval = smsc911x_enable_resources(pdev);
2485 	if (retval)
2486 		goto out_enable_resources_fail;
2487 
2488 	if (pdata->ioaddr == NULL) {
2489 		SMSC_WARN(pdata, probe, "Error smsc911x base address invalid");
2490 		retval = -ENOMEM;
2491 		goto out_disable_resources;
2492 	}
2493 
2494 	retval = smsc911x_probe_config(&pdata->config, &pdev->dev);
2495 	if (retval && config) {
2496 		/* copy config parameters across to pdata */
2497 		memcpy(&pdata->config, config, sizeof(pdata->config));
2498 		retval = 0;
2499 	}
2500 
2501 	if (retval) {
2502 		SMSC_WARN(pdata, probe, "Error smsc911x config not found");
2503 		goto out_disable_resources;
2504 	}
2505 
2506 	/* assume standard, non-shifted, access to HW registers */
2507 	pdata->ops = &standard_smsc911x_ops;
2508 	/* apply the right access if shifting is needed */
2509 	if (pdata->config.shift)
2510 		pdata->ops = &shifted_smsc911x_ops;
2511 
2512 	pm_runtime_enable(&pdev->dev);
2513 	pm_runtime_get_sync(&pdev->dev);
2514 
2515 	retval = smsc911x_init(dev);
2516 	if (retval < 0)
2517 		goto out_disable_resources;
2518 
2519 	netif_carrier_off(dev);
2520 
2521 	retval = smsc911x_mii_init(pdev, dev);
2522 	if (retval) {
2523 		SMSC_WARN(pdata, probe, "Error %i initialising mii", retval);
2524 		goto out_disable_resources;
2525 	}
2526 
2527 	retval = register_netdev(dev);
2528 	if (retval) {
2529 		SMSC_WARN(pdata, probe, "Error %i registering device", retval);
2530 		goto out_disable_resources;
2531 	} else {
2532 		SMSC_TRACE(pdata, probe,
2533 			   "Network interface: \"%s\"", dev->name);
2534 	}
2535 
2536 	spin_lock_irq(&pdata->mac_lock);
2537 
2538 	/* Check if mac address has been specified when bringing interface up */
2539 	if (is_valid_ether_addr(dev->dev_addr)) {
2540 		smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
2541 		SMSC_TRACE(pdata, probe,
2542 			   "MAC Address is specified by configuration");
2543 	} else if (is_valid_ether_addr(pdata->config.mac)) {
2544 		memcpy(dev->dev_addr, pdata->config.mac, ETH_ALEN);
2545 		SMSC_TRACE(pdata, probe,
2546 			   "MAC Address specified by platform data");
2547 	} else {
2548 		/* Try reading mac address from device. if EEPROM is present
2549 		 * it will already have been set */
2550 		smsc_get_mac(dev);
2551 
2552 		if (is_valid_ether_addr(dev->dev_addr)) {
2553 			/* eeprom values are valid  so use them */
2554 			SMSC_TRACE(pdata, probe,
2555 				   "Mac Address is read from LAN911x EEPROM");
2556 		} else {
2557 			/* eeprom values are invalid, generate random MAC */
2558 			eth_hw_addr_random(dev);
2559 			smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
2560 			SMSC_TRACE(pdata, probe,
2561 				   "MAC Address is set to eth_random_addr");
2562 		}
2563 	}
2564 
2565 	spin_unlock_irq(&pdata->mac_lock);
2566 
2567 	netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr);
2568 
2569 	return 0;
2570 
2571 out_disable_resources:
2572 	pm_runtime_put(&pdev->dev);
2573 	pm_runtime_disable(&pdev->dev);
2574 	(void)smsc911x_disable_resources(pdev);
2575 out_enable_resources_fail:
2576 	smsc911x_free_resources(pdev);
2577 out_request_resources_fail:
2578 	iounmap(pdata->ioaddr);
2579 out_ioremap_fail:
2580 	free_netdev(dev);
2581 out_release_io_1:
2582 	release_mem_region(res->start, resource_size(res));
2583 out_0:
2584 	return retval;
2585 }
2586 
2587 #ifdef CONFIG_PM
2588 /* This implementation assumes the devices remains powered on its VDDVARIO
2589  * pins during suspend. */
2590 
2591 /* TODO: implement freeze/thaw callbacks for hibernation.*/
2592 
2593 static int smsc911x_suspend(struct device *dev)
2594 {
2595 	struct net_device *ndev = dev_get_drvdata(dev);
2596 	struct smsc911x_data *pdata = netdev_priv(ndev);
2597 
2598 	if (netif_running(ndev)) {
2599 		netif_stop_queue(ndev);
2600 		netif_device_detach(ndev);
2601 	}
2602 
2603 	/* enable wake on LAN, energy detection and the external PME
2604 	 * signal. */
2605 	smsc911x_reg_write(pdata, PMT_CTRL,
2606 		PMT_CTRL_PM_MODE_D1_ | PMT_CTRL_WOL_EN_ |
2607 		PMT_CTRL_ED_EN_ | PMT_CTRL_PME_EN_);
2608 
2609 	pm_runtime_disable(dev);
2610 	pm_runtime_set_suspended(dev);
2611 
2612 	return 0;
2613 }
2614 
2615 static int smsc911x_resume(struct device *dev)
2616 {
2617 	struct net_device *ndev = dev_get_drvdata(dev);
2618 	struct smsc911x_data *pdata = netdev_priv(ndev);
2619 	unsigned int to = 100;
2620 
2621 	pm_runtime_enable(dev);
2622 	pm_runtime_resume(dev);
2623 
2624 	/* Note 3.11 from the datasheet:
2625 	 * 	"When the LAN9220 is in a power saving state, a write of any
2626 	 * 	 data to the BYTE_TEST register will wake-up the device."
2627 	 */
2628 	smsc911x_reg_write(pdata, BYTE_TEST, 0);
2629 
2630 	/* poll the READY bit in PMT_CTRL. Any other access to the device is
2631 	 * forbidden while this bit isn't set. Try for 100ms and return -EIO
2632 	 * if it failed. */
2633 	while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to)
2634 		udelay(1000);
2635 
2636 	if (to == 0)
2637 		return -EIO;
2638 
2639 	if (netif_running(ndev)) {
2640 		netif_device_attach(ndev);
2641 		netif_start_queue(ndev);
2642 	}
2643 
2644 	return 0;
2645 }
2646 
2647 static const struct dev_pm_ops smsc911x_pm_ops = {
2648 	.suspend	= smsc911x_suspend,
2649 	.resume		= smsc911x_resume,
2650 };
2651 
2652 #define SMSC911X_PM_OPS (&smsc911x_pm_ops)
2653 
2654 #else
2655 #define SMSC911X_PM_OPS NULL
2656 #endif
2657 
2658 #ifdef CONFIG_OF
2659 static const struct of_device_id smsc911x_dt_ids[] = {
2660 	{ .compatible = "smsc,lan9115", },
2661 	{ /* sentinel */ }
2662 };
2663 MODULE_DEVICE_TABLE(of, smsc911x_dt_ids);
2664 #endif
2665 
2666 static const struct acpi_device_id smsc911x_acpi_match[] = {
2667 	{ "ARMH9118", 0 },
2668 	{ }
2669 };
2670 MODULE_DEVICE_TABLE(acpi, smsc911x_acpi_match);
2671 
2672 static struct platform_driver smsc911x_driver = {
2673 	.probe = smsc911x_drv_probe,
2674 	.remove = smsc911x_drv_remove,
2675 	.driver = {
2676 		.name	= SMSC_CHIPNAME,
2677 		.pm	= SMSC911X_PM_OPS,
2678 		.of_match_table = of_match_ptr(smsc911x_dt_ids),
2679 		.acpi_match_table = ACPI_PTR(smsc911x_acpi_match),
2680 	},
2681 };
2682 
2683 /* Entry point for loading the module */
2684 static int __init smsc911x_init_module(void)
2685 {
2686 	SMSC_INITIALIZE();
2687 	return platform_driver_register(&smsc911x_driver);
2688 }
2689 
2690 /* entry point for unloading the module */
2691 static void __exit smsc911x_cleanup_module(void)
2692 {
2693 	platform_driver_unregister(&smsc911x_driver);
2694 }
2695 
2696 module_init(smsc911x_init_module);
2697 module_exit(smsc911x_cleanup_module);
2698