xref: /linux/drivers/net/ethernet/qlogic/Kconfig (revision e5451c8f8330e03ad3cfa16048b4daf961af434f)
1#
2# QLogic network device configuration
3#
4
5config NET_VENDOR_QLOGIC
6	bool "QLogic devices"
7	default y
8	depends on PCI
9	---help---
10	  If you have a network (Ethernet) card belonging to this class, say Y.
11
12	  Note that the answer to this question doesn't directly affect the
13	  kernel: saying N will just cause the configurator to skip all
14	  the questions about QLogic cards. If you say Y, you will be asked for
15	  your specific card in the following questions.
16
17if NET_VENDOR_QLOGIC
18
19config QLA3XXX
20	tristate "QLogic QLA3XXX Network Driver Support"
21	depends on PCI
22	---help---
23	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
24
25	  To compile this driver as a module, choose M here: the module
26	  will be called qla3xxx.
27
28config QLCNIC
29	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
30	depends on PCI
31	select FW_LOADER
32	---help---
33	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
34	  devices.
35
36config QLCNIC_SRIOV
37	bool "QLOGIC QLCNIC 83XX family SR-IOV Support"
38	depends on QLCNIC && PCI_IOV
39	default y
40	---help---
41	  This configuration parameter enables Single Root Input Output
42	  Virtualization support for QLE83XX Converged Ethernet devices.
43	  This allows for virtual function acceleration in virtualized
44	  environments.
45
46config QLCNIC_DCB
47	bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support"
48	depends on QLCNIC && DCB
49	default y
50	---help---
51	  This configuration parameter enables DCB support in QLE83XX
52	  and QLE82XX Converged Ethernet devices. This allows for DCB
53	  get operations support through rtNetlink interface. Only CEE
54	  mode of DCB is supported. PG and PFC values are related only
55	  to Tx.
56
57config QLCNIC_VXLAN
58	bool "Virtual eXtensible Local Area Network (VXLAN) offload support"
59	default n
60	depends on QLCNIC && VXLAN && !(QLCNIC=y && VXLAN=m)
61	---help---
62	  This enables hardware offload support for VXLAN protocol over QLogic's
63	  84XX series adapters.
64	  Say Y here if you want to enable hardware offload support for
65	  Virtual eXtensible Local Area Network (VXLAN) in the driver.
66
67config QLCNIC_HWMON
68	bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
69	depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m)
70	default y
71	---help---
72	  This configuration parameter can be used to read the
73	  board temperature in Converged Ethernet devices
74	  supported by qlcnic.
75
76	  This data is available via the hwmon sysfs interface.
77
78config QLGE
79	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
80	depends on PCI
81	---help---
82	  This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
83
84	  To compile this driver as a module, choose M here: the module
85	  will be called qlge.
86
87config NETXEN_NIC
88	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
89	depends on PCI
90	select FW_LOADER
91	---help---
92	  This enables the support for NetXen's Gigabit Ethernet card.
93
94config QED
95	tristate "QLogic QED 25/40/100Gb core driver"
96	depends on PCI
97	select ZLIB_INFLATE
98	---help---
99	  This enables the support for ...
100
101config QEDE
102	tristate "QLogic QED 25/40/100Gb Ethernet NIC"
103	depends on QED
104	---help---
105	  This enables the support for ...
106endif # NET_VENDOR_QLOGIC
107