1 // SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause 2 3 /* Gigabit Ethernet driver for Mellanox BlueField SoC 4 * 5 * Copyright (C) 2020-2021 NVIDIA CORPORATION & AFFILIATES 6 */ 7 8 #include <linux/acpi.h> 9 #include <linux/device.h> 10 #include <linux/dma-mapping.h> 11 #include <linux/etherdevice.h> 12 #include <linux/interrupt.h> 13 #include <linux/iopoll.h> 14 #include <linux/module.h> 15 #include <linux/phy.h> 16 #include <linux/platform_device.h> 17 #include <linux/skbuff.h> 18 19 #include "mlxbf_gige.h" 20 #include "mlxbf_gige_regs.h" 21 22 /* Allocate SKB whose payload pointer aligns with the Bluefield 23 * hardware DMA limitation, i.e. DMA operation can't cross 24 * a 4KB boundary. A maximum packet size of 2KB is assumed in the 25 * alignment formula. The alignment logic overallocates an SKB, 26 * and then adjusts the headroom so that the SKB data pointer is 27 * naturally aligned to a 2KB boundary. 28 */ 29 struct sk_buff *mlxbf_gige_alloc_skb(struct mlxbf_gige *priv, 30 unsigned int map_len, 31 dma_addr_t *buf_dma, 32 enum dma_data_direction dir) 33 { 34 struct sk_buff *skb; 35 u64 addr, offset; 36 37 /* Overallocate the SKB so that any headroom adjustment (to 38 * provide 2KB natural alignment) does not exceed payload area 39 */ 40 skb = netdev_alloc_skb(priv->netdev, MLXBF_GIGE_DEFAULT_BUF_SZ * 2); 41 if (!skb) 42 return NULL; 43 44 /* Adjust the headroom so that skb->data is naturally aligned to 45 * a 2KB boundary, which is the maximum packet size supported. 46 */ 47 addr = (long)skb->data; 48 offset = (addr + MLXBF_GIGE_DEFAULT_BUF_SZ - 1) & 49 ~(MLXBF_GIGE_DEFAULT_BUF_SZ - 1); 50 offset -= addr; 51 if (offset) 52 skb_reserve(skb, offset); 53 54 /* Return streaming DMA mapping to caller */ 55 *buf_dma = dma_map_single(priv->dev, skb->data, map_len, dir); 56 if (dma_mapping_error(priv->dev, *buf_dma)) { 57 dev_kfree_skb(skb); 58 *buf_dma = (dma_addr_t)0; 59 return NULL; 60 } 61 62 return skb; 63 } 64 65 static void mlxbf_gige_initial_mac(struct mlxbf_gige *priv) 66 { 67 u8 mac[ETH_ALEN]; 68 u64 local_mac; 69 70 eth_zero_addr(mac); 71 mlxbf_gige_get_mac_rx_filter(priv, MLXBF_GIGE_LOCAL_MAC_FILTER_IDX, 72 &local_mac); 73 u64_to_ether_addr(local_mac, mac); 74 75 if (is_valid_ether_addr(mac)) { 76 eth_hw_addr_set(priv->netdev, mac); 77 } else { 78 /* Provide a random MAC if for some reason the device has 79 * not been configured with a valid MAC address already. 80 */ 81 eth_hw_addr_random(priv->netdev); 82 } 83 84 local_mac = ether_addr_to_u64(priv->netdev->dev_addr); 85 mlxbf_gige_set_mac_rx_filter(priv, MLXBF_GIGE_LOCAL_MAC_FILTER_IDX, 86 local_mac); 87 } 88 89 static void mlxbf_gige_cache_stats(struct mlxbf_gige *priv) 90 { 91 struct mlxbf_gige_stats *p; 92 93 /* Cache stats that will be cleared by clean port operation */ 94 p = &priv->stats; 95 p->rx_din_dropped_pkts += readq(priv->base + 96 MLXBF_GIGE_RX_DIN_DROP_COUNTER); 97 p->rx_filter_passed_pkts += readq(priv->base + 98 MLXBF_GIGE_RX_PASS_COUNTER_ALL); 99 p->rx_filter_discard_pkts += readq(priv->base + 100 MLXBF_GIGE_RX_DISC_COUNTER_ALL); 101 } 102 103 static int mlxbf_gige_clean_port(struct mlxbf_gige *priv) 104 { 105 u64 control; 106 u64 temp; 107 int err; 108 109 /* Set the CLEAN_PORT_EN bit to trigger SW reset */ 110 control = readq(priv->base + MLXBF_GIGE_CONTROL); 111 control |= MLXBF_GIGE_CONTROL_CLEAN_PORT_EN; 112 writeq(control, priv->base + MLXBF_GIGE_CONTROL); 113 114 /* Ensure completion of "clean port" write before polling status */ 115 mb(); 116 117 err = readq_poll_timeout_atomic(priv->base + MLXBF_GIGE_STATUS, temp, 118 (temp & MLXBF_GIGE_STATUS_READY), 119 100, 100000); 120 121 /* Clear the CLEAN_PORT_EN bit at end of this loop */ 122 control = readq(priv->base + MLXBF_GIGE_CONTROL); 123 control &= ~MLXBF_GIGE_CONTROL_CLEAN_PORT_EN; 124 writeq(control, priv->base + MLXBF_GIGE_CONTROL); 125 126 return err; 127 } 128 129 static int mlxbf_gige_open(struct net_device *netdev) 130 { 131 struct mlxbf_gige *priv = netdev_priv(netdev); 132 struct phy_device *phydev = netdev->phydev; 133 u64 int_en; 134 int err; 135 136 err = mlxbf_gige_request_irqs(priv); 137 if (err) 138 return err; 139 mlxbf_gige_cache_stats(priv); 140 err = mlxbf_gige_clean_port(priv); 141 if (err) 142 goto free_irqs; 143 144 /* Clear driver's valid_polarity to match hardware, 145 * since the above call to clean_port() resets the 146 * receive polarity used by hardware. 147 */ 148 priv->valid_polarity = 0; 149 150 err = mlxbf_gige_rx_init(priv); 151 if (err) 152 goto free_irqs; 153 err = mlxbf_gige_tx_init(priv); 154 if (err) 155 goto rx_deinit; 156 157 phy_start(phydev); 158 159 netif_napi_add(netdev, &priv->napi, mlxbf_gige_poll); 160 napi_enable(&priv->napi); 161 netif_start_queue(netdev); 162 163 /* Set bits in INT_EN that we care about */ 164 int_en = MLXBF_GIGE_INT_EN_HW_ACCESS_ERROR | 165 MLXBF_GIGE_INT_EN_TX_CHECKSUM_INPUTS | 166 MLXBF_GIGE_INT_EN_TX_SMALL_FRAME_SIZE | 167 MLXBF_GIGE_INT_EN_TX_PI_CI_EXCEED_WQ_SIZE | 168 MLXBF_GIGE_INT_EN_SW_CONFIG_ERROR | 169 MLXBF_GIGE_INT_EN_SW_ACCESS_ERROR | 170 MLXBF_GIGE_INT_EN_RX_RECEIVE_PACKET; 171 172 /* Ensure completion of all initialization before enabling interrupts */ 173 mb(); 174 175 writeq(int_en, priv->base + MLXBF_GIGE_INT_EN); 176 177 return 0; 178 179 rx_deinit: 180 mlxbf_gige_rx_deinit(priv); 181 182 free_irqs: 183 mlxbf_gige_free_irqs(priv); 184 return err; 185 } 186 187 static int mlxbf_gige_stop(struct net_device *netdev) 188 { 189 struct mlxbf_gige *priv = netdev_priv(netdev); 190 191 writeq(0, priv->base + MLXBF_GIGE_INT_EN); 192 netif_stop_queue(netdev); 193 napi_disable(&priv->napi); 194 netif_napi_del(&priv->napi); 195 mlxbf_gige_free_irqs(priv); 196 197 phy_stop(netdev->phydev); 198 199 mlxbf_gige_rx_deinit(priv); 200 mlxbf_gige_tx_deinit(priv); 201 mlxbf_gige_cache_stats(priv); 202 mlxbf_gige_clean_port(priv); 203 204 return 0; 205 } 206 207 static int mlxbf_gige_eth_ioctl(struct net_device *netdev, 208 struct ifreq *ifr, int cmd) 209 { 210 if (!(netif_running(netdev))) 211 return -EINVAL; 212 213 return phy_mii_ioctl(netdev->phydev, ifr, cmd); 214 } 215 216 static void mlxbf_gige_set_rx_mode(struct net_device *netdev) 217 { 218 struct mlxbf_gige *priv = netdev_priv(netdev); 219 bool new_promisc_enabled; 220 221 new_promisc_enabled = netdev->flags & IFF_PROMISC; 222 223 /* Only write to the hardware registers if the new setting 224 * of promiscuous mode is different from the current one. 225 */ 226 if (new_promisc_enabled != priv->promisc_enabled) { 227 priv->promisc_enabled = new_promisc_enabled; 228 229 if (new_promisc_enabled) 230 mlxbf_gige_enable_promisc(priv); 231 else 232 mlxbf_gige_disable_promisc(priv); 233 } 234 } 235 236 static void mlxbf_gige_get_stats64(struct net_device *netdev, 237 struct rtnl_link_stats64 *stats) 238 { 239 struct mlxbf_gige *priv = netdev_priv(netdev); 240 241 netdev_stats_to_stats64(stats, &netdev->stats); 242 243 stats->rx_length_errors = priv->stats.rx_truncate_errors; 244 stats->rx_fifo_errors = priv->stats.rx_din_dropped_pkts + 245 readq(priv->base + MLXBF_GIGE_RX_DIN_DROP_COUNTER); 246 stats->rx_crc_errors = priv->stats.rx_mac_errors; 247 stats->rx_errors = stats->rx_length_errors + 248 stats->rx_fifo_errors + 249 stats->rx_crc_errors; 250 251 stats->tx_fifo_errors = priv->stats.tx_fifo_full; 252 stats->tx_errors = stats->tx_fifo_errors; 253 } 254 255 static const struct net_device_ops mlxbf_gige_netdev_ops = { 256 .ndo_open = mlxbf_gige_open, 257 .ndo_stop = mlxbf_gige_stop, 258 .ndo_start_xmit = mlxbf_gige_start_xmit, 259 .ndo_set_mac_address = eth_mac_addr, 260 .ndo_validate_addr = eth_validate_addr, 261 .ndo_eth_ioctl = mlxbf_gige_eth_ioctl, 262 .ndo_set_rx_mode = mlxbf_gige_set_rx_mode, 263 .ndo_get_stats64 = mlxbf_gige_get_stats64, 264 }; 265 266 static void mlxbf_gige_bf2_adjust_link(struct net_device *netdev) 267 { 268 struct phy_device *phydev = netdev->phydev; 269 270 phy_print_status(phydev); 271 } 272 273 static void mlxbf_gige_bf3_adjust_link(struct net_device *netdev) 274 { 275 struct mlxbf_gige *priv = netdev_priv(netdev); 276 struct phy_device *phydev = netdev->phydev; 277 u8 sgmii_mode; 278 u16 ipg_size; 279 u32 val; 280 281 if (phydev->link && phydev->speed != priv->prev_speed) { 282 switch (phydev->speed) { 283 case 1000: 284 ipg_size = MLXBF_GIGE_1G_IPG_SIZE; 285 sgmii_mode = MLXBF_GIGE_1G_SGMII_MODE; 286 break; 287 case 100: 288 ipg_size = MLXBF_GIGE_100M_IPG_SIZE; 289 sgmii_mode = MLXBF_GIGE_100M_SGMII_MODE; 290 break; 291 case 10: 292 ipg_size = MLXBF_GIGE_10M_IPG_SIZE; 293 sgmii_mode = MLXBF_GIGE_10M_SGMII_MODE; 294 break; 295 default: 296 return; 297 } 298 299 val = readl(priv->plu_base + MLXBF_GIGE_PLU_TX_REG0); 300 val &= ~(MLXBF_GIGE_PLU_TX_IPG_SIZE_MASK | MLXBF_GIGE_PLU_TX_SGMII_MODE_MASK); 301 val |= FIELD_PREP(MLXBF_GIGE_PLU_TX_IPG_SIZE_MASK, ipg_size); 302 val |= FIELD_PREP(MLXBF_GIGE_PLU_TX_SGMII_MODE_MASK, sgmii_mode); 303 writel(val, priv->plu_base + MLXBF_GIGE_PLU_TX_REG0); 304 305 val = readl(priv->plu_base + MLXBF_GIGE_PLU_RX_REG0); 306 val &= ~MLXBF_GIGE_PLU_RX_SGMII_MODE_MASK; 307 val |= FIELD_PREP(MLXBF_GIGE_PLU_RX_SGMII_MODE_MASK, sgmii_mode); 308 writel(val, priv->plu_base + MLXBF_GIGE_PLU_RX_REG0); 309 310 priv->prev_speed = phydev->speed; 311 } 312 313 phy_print_status(phydev); 314 } 315 316 static void mlxbf_gige_bf2_set_phy_link_mode(struct phy_device *phydev) 317 { 318 /* MAC only supports 1000T full duplex mode */ 319 phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT); 320 phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Full_BIT); 321 phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT); 322 phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Full_BIT); 323 phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT); 324 325 /* Only symmetric pause with flow control enabled is supported so no 326 * need to negotiate pause. 327 */ 328 linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->advertising); 329 linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->advertising); 330 } 331 332 static void mlxbf_gige_bf3_set_phy_link_mode(struct phy_device *phydev) 333 { 334 /* MAC only supports full duplex mode */ 335 phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT); 336 phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT); 337 phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT); 338 339 /* Only symmetric pause with flow control enabled is supported so no 340 * need to negotiate pause. 341 */ 342 linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->advertising); 343 linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->advertising); 344 } 345 346 static struct mlxbf_gige_link_cfg mlxbf_gige_link_cfgs[] = { 347 [MLXBF_GIGE_VERSION_BF2] = { 348 .set_phy_link_mode = mlxbf_gige_bf2_set_phy_link_mode, 349 .adjust_link = mlxbf_gige_bf2_adjust_link, 350 .phy_mode = PHY_INTERFACE_MODE_GMII 351 }, 352 [MLXBF_GIGE_VERSION_BF3] = { 353 .set_phy_link_mode = mlxbf_gige_bf3_set_phy_link_mode, 354 .adjust_link = mlxbf_gige_bf3_adjust_link, 355 .phy_mode = PHY_INTERFACE_MODE_SGMII 356 } 357 }; 358 359 static int mlxbf_gige_probe(struct platform_device *pdev) 360 { 361 struct phy_device *phydev; 362 struct net_device *netdev; 363 struct mlxbf_gige *priv; 364 void __iomem *llu_base; 365 void __iomem *plu_base; 366 void __iomem *base; 367 int addr, phy_irq; 368 u64 control; 369 int err; 370 371 base = devm_platform_ioremap_resource(pdev, MLXBF_GIGE_RES_MAC); 372 if (IS_ERR(base)) 373 return PTR_ERR(base); 374 375 llu_base = devm_platform_ioremap_resource(pdev, MLXBF_GIGE_RES_LLU); 376 if (IS_ERR(llu_base)) 377 return PTR_ERR(llu_base); 378 379 plu_base = devm_platform_ioremap_resource(pdev, MLXBF_GIGE_RES_PLU); 380 if (IS_ERR(plu_base)) 381 return PTR_ERR(plu_base); 382 383 /* Perform general init of GigE block */ 384 control = readq(base + MLXBF_GIGE_CONTROL); 385 control |= MLXBF_GIGE_CONTROL_PORT_EN; 386 writeq(control, base + MLXBF_GIGE_CONTROL); 387 388 netdev = devm_alloc_etherdev(&pdev->dev, sizeof(*priv)); 389 if (!netdev) 390 return -ENOMEM; 391 392 SET_NETDEV_DEV(netdev, &pdev->dev); 393 netdev->netdev_ops = &mlxbf_gige_netdev_ops; 394 netdev->ethtool_ops = &mlxbf_gige_ethtool_ops; 395 priv = netdev_priv(netdev); 396 priv->netdev = netdev; 397 398 platform_set_drvdata(pdev, priv); 399 priv->dev = &pdev->dev; 400 priv->pdev = pdev; 401 402 spin_lock_init(&priv->lock); 403 404 priv->hw_version = readq(base + MLXBF_GIGE_VERSION); 405 406 /* Attach MDIO device */ 407 err = mlxbf_gige_mdio_probe(pdev, priv); 408 if (err) 409 return err; 410 411 priv->base = base; 412 priv->llu_base = llu_base; 413 priv->plu_base = plu_base; 414 415 priv->rx_q_entries = MLXBF_GIGE_DEFAULT_RXQ_SZ; 416 priv->tx_q_entries = MLXBF_GIGE_DEFAULT_TXQ_SZ; 417 418 /* Write initial MAC address to hardware */ 419 mlxbf_gige_initial_mac(priv); 420 421 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); 422 if (err) { 423 dev_err(&pdev->dev, "DMA configuration failed: 0x%x\n", err); 424 goto out; 425 } 426 427 priv->error_irq = platform_get_irq(pdev, MLXBF_GIGE_ERROR_INTR_IDX); 428 priv->rx_irq = platform_get_irq(pdev, MLXBF_GIGE_RECEIVE_PKT_INTR_IDX); 429 priv->llu_plu_irq = platform_get_irq(pdev, MLXBF_GIGE_LLU_PLU_INTR_IDX); 430 431 phy_irq = acpi_dev_gpio_irq_get_by(ACPI_COMPANION(&pdev->dev), "phy-gpios", 0); 432 if (phy_irq < 0) { 433 dev_err(&pdev->dev, "Error getting PHY irq. Use polling instead"); 434 phy_irq = PHY_POLL; 435 } 436 437 phydev = phy_find_first(priv->mdiobus); 438 if (!phydev) { 439 err = -ENODEV; 440 goto out; 441 } 442 443 addr = phydev->mdio.addr; 444 priv->mdiobus->irq[addr] = phy_irq; 445 phydev->irq = phy_irq; 446 447 err = phy_connect_direct(netdev, phydev, 448 mlxbf_gige_link_cfgs[priv->hw_version].adjust_link, 449 mlxbf_gige_link_cfgs[priv->hw_version].phy_mode); 450 if (err) { 451 dev_err(&pdev->dev, "Could not attach to PHY\n"); 452 goto out; 453 } 454 455 mlxbf_gige_link_cfgs[priv->hw_version].set_phy_link_mode(phydev); 456 457 /* Display information about attached PHY device */ 458 phy_attached_info(phydev); 459 460 err = register_netdev(netdev); 461 if (err) { 462 dev_err(&pdev->dev, "Failed to register netdev\n"); 463 phy_disconnect(phydev); 464 goto out; 465 } 466 467 return 0; 468 469 out: 470 mlxbf_gige_mdio_remove(priv); 471 return err; 472 } 473 474 static void mlxbf_gige_remove(struct platform_device *pdev) 475 { 476 struct mlxbf_gige *priv = platform_get_drvdata(pdev); 477 478 unregister_netdev(priv->netdev); 479 phy_disconnect(priv->netdev->phydev); 480 mlxbf_gige_mdio_remove(priv); 481 platform_set_drvdata(pdev, NULL); 482 } 483 484 static void mlxbf_gige_shutdown(struct platform_device *pdev) 485 { 486 struct mlxbf_gige *priv = platform_get_drvdata(pdev); 487 488 writeq(0, priv->base + MLXBF_GIGE_INT_EN); 489 mlxbf_gige_clean_port(priv); 490 } 491 492 static const struct acpi_device_id __maybe_unused mlxbf_gige_acpi_match[] = { 493 { "MLNXBF17", 0 }, 494 {}, 495 }; 496 MODULE_DEVICE_TABLE(acpi, mlxbf_gige_acpi_match); 497 498 static struct platform_driver mlxbf_gige_driver = { 499 .probe = mlxbf_gige_probe, 500 .remove_new = mlxbf_gige_remove, 501 .shutdown = mlxbf_gige_shutdown, 502 .driver = { 503 .name = KBUILD_MODNAME, 504 .acpi_match_table = ACPI_PTR(mlxbf_gige_acpi_match), 505 }, 506 }; 507 508 module_platform_driver(mlxbf_gige_driver); 509 510 MODULE_DESCRIPTION("Mellanox BlueField SoC Gigabit Ethernet Driver"); 511 MODULE_AUTHOR("David Thompson <davthompson@nvidia.com>"); 512 MODULE_AUTHOR("Asmaa Mnebhi <asmaa@nvidia.com>"); 513 MODULE_LICENSE("Dual BSD/GPL"); 514