1 /* 2 * Copyright (c) 2012 Mellanox Technologies. All rights reserved. 3 * 4 * This software is available to you under a choice of one of two 5 * licenses. You may choose to be licensed under the terms of the GNU 6 * General Public License (GPL) Version 2, available from the file 7 * COPYING in the main directory of this source tree, or the 8 * OpenIB.org BSD license below: 9 * 10 * Redistribution and use in source and binary forms, with or 11 * without modification, are permitted provided that the following 12 * conditions are met: 13 * 14 * - Redistributions of source code must retain the above 15 * copyright notice, this list of conditions and the following 16 * disclaimer. 17 * 18 * - Redistributions in binary form must reproduce the above 19 * copyright notice, this list of conditions and the following 20 * disclaimer in the documentation and/or other materials 21 * provided with the distribution. 22 * 23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 30 * SOFTWARE. 31 * 32 */ 33 34 #include <linux/mlx4/device.h> 35 #include <linux/clocksource.h> 36 37 #include "mlx4_en.h" 38 39 /* mlx4_en_read_clock - read raw cycle counter (to be used by time counter) 40 */ 41 static u64 mlx4_en_read_clock(const struct cyclecounter *tc) 42 { 43 struct mlx4_en_dev *mdev = 44 container_of(tc, struct mlx4_en_dev, cycles); 45 struct mlx4_dev *dev = mdev->dev; 46 47 return mlx4_read_clock(dev) & tc->mask; 48 } 49 50 u64 mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe) 51 { 52 u64 hi, lo; 53 struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; 54 55 lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); 56 hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; 57 58 return hi | lo; 59 } 60 61 u64 mlx4_en_get_hwtstamp(struct mlx4_en_dev *mdev, u64 timestamp) 62 { 63 unsigned int seq; 64 u64 nsec; 65 66 do { 67 seq = read_seqbegin(&mdev->clock_lock); 68 nsec = timecounter_cyc2time(&mdev->clock, timestamp); 69 } while (read_seqretry(&mdev->clock_lock, seq)); 70 71 return ns_to_ktime(nsec); 72 } 73 74 void mlx4_en_fill_hwtstamps(struct mlx4_en_dev *mdev, 75 struct skb_shared_hwtstamps *hwts, 76 u64 timestamp) 77 { 78 memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); 79 hwts->hwtstamp = mlx4_en_get_hwtstamp(mdev, timestamp); 80 } 81 82 /** 83 * mlx4_en_remove_timestamp - disable PTP device 84 * @mdev: board private structure 85 * 86 * Stop the PTP support. 87 **/ 88 void mlx4_en_remove_timestamp(struct mlx4_en_dev *mdev) 89 { 90 if (mdev->ptp_clock) { 91 ptp_clock_unregister(mdev->ptp_clock); 92 mdev->ptp_clock = NULL; 93 mlx4_info(mdev, "removed PHC\n"); 94 } 95 } 96 97 #define MLX4_EN_WRAP_AROUND_SEC 10UL 98 /* By scheduling the overflow check every 5 seconds, we have a reasonably 99 * good chance we won't miss a wrap around. 100 * TODO: Use a timer instead of a work queue to increase the guarantee. 101 */ 102 #define MLX4_EN_OVERFLOW_PERIOD (MLX4_EN_WRAP_AROUND_SEC * HZ / 2) 103 104 void mlx4_en_ptp_overflow_check(struct mlx4_en_dev *mdev) 105 { 106 bool timeout = time_is_before_jiffies(mdev->last_overflow_check + 107 MLX4_EN_OVERFLOW_PERIOD); 108 unsigned long flags; 109 110 if (timeout) { 111 write_seqlock_irqsave(&mdev->clock_lock, flags); 112 timecounter_read(&mdev->clock); 113 write_sequnlock_irqrestore(&mdev->clock_lock, flags); 114 mdev->last_overflow_check = jiffies; 115 } 116 } 117 118 /** 119 * mlx4_en_phc_adjfine - adjust the frequency of the hardware clock 120 * @ptp: ptp clock structure 121 * @scaled_ppm: Desired frequency change in scaled parts per million 122 * 123 * Adjust the frequency of the PHC cycle counter by the indicated scaled_ppm 124 * from the base frequency. 125 * 126 * Scaled parts per million is ppm with a 16-bit binary fractional field. 127 **/ 128 static int mlx4_en_phc_adjfine(struct ptp_clock_info *ptp, long scaled_ppm) 129 { 130 u32 mult; 131 unsigned long flags; 132 struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, 133 ptp_clock_info); 134 135 mult = (u32)adjust_by_scaled_ppm(mdev->nominal_c_mult, scaled_ppm); 136 137 write_seqlock_irqsave(&mdev->clock_lock, flags); 138 timecounter_read(&mdev->clock); 139 mdev->cycles.mult = mult; 140 write_sequnlock_irqrestore(&mdev->clock_lock, flags); 141 142 return 0; 143 } 144 145 /** 146 * mlx4_en_phc_adjtime - Shift the time of the hardware clock 147 * @ptp: ptp clock structure 148 * @delta: Desired change in nanoseconds 149 * 150 * Adjust the timer by resetting the timecounter structure. 151 **/ 152 static int mlx4_en_phc_adjtime(struct ptp_clock_info *ptp, s64 delta) 153 { 154 struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, 155 ptp_clock_info); 156 unsigned long flags; 157 158 write_seqlock_irqsave(&mdev->clock_lock, flags); 159 timecounter_adjtime(&mdev->clock, delta); 160 write_sequnlock_irqrestore(&mdev->clock_lock, flags); 161 162 return 0; 163 } 164 165 /** 166 * mlx4_en_phc_gettime - Reads the current time from the hardware clock 167 * @ptp: ptp clock structure 168 * @ts: timespec structure to hold the current time value 169 * 170 * Read the timecounter and return the correct value in ns after converting 171 * it into a struct timespec. 172 **/ 173 static int mlx4_en_phc_gettime(struct ptp_clock_info *ptp, 174 struct timespec64 *ts) 175 { 176 struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, 177 ptp_clock_info); 178 unsigned long flags; 179 u64 ns; 180 181 write_seqlock_irqsave(&mdev->clock_lock, flags); 182 ns = timecounter_read(&mdev->clock); 183 write_sequnlock_irqrestore(&mdev->clock_lock, flags); 184 185 *ts = ns_to_timespec64(ns); 186 187 return 0; 188 } 189 190 /** 191 * mlx4_en_phc_settime - Set the current time on the hardware clock 192 * @ptp: ptp clock structure 193 * @ts: timespec containing the new time for the cycle counter 194 * 195 * Reset the timecounter to use a new base value instead of the kernel 196 * wall timer value. 197 **/ 198 static int mlx4_en_phc_settime(struct ptp_clock_info *ptp, 199 const struct timespec64 *ts) 200 { 201 struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, 202 ptp_clock_info); 203 u64 ns = timespec64_to_ns(ts); 204 unsigned long flags; 205 206 /* reset the timecounter */ 207 write_seqlock_irqsave(&mdev->clock_lock, flags); 208 timecounter_init(&mdev->clock, &mdev->cycles, ns); 209 write_sequnlock_irqrestore(&mdev->clock_lock, flags); 210 211 return 0; 212 } 213 214 /** 215 * mlx4_en_phc_enable - enable or disable an ancillary feature 216 * @ptp: ptp clock structure 217 * @request: Desired resource to enable or disable 218 * @on: Caller passes one to enable or zero to disable 219 * 220 * Enable (or disable) ancillary features of the PHC subsystem. 221 * Currently, no ancillary features are supported. 222 **/ 223 static int mlx4_en_phc_enable(struct ptp_clock_info __always_unused *ptp, 224 struct ptp_clock_request __always_unused *request, 225 int __always_unused on) 226 { 227 return -EOPNOTSUPP; 228 } 229 230 static const struct ptp_clock_info mlx4_en_ptp_clock_info = { 231 .owner = THIS_MODULE, 232 .max_adj = 100000000, 233 .n_alarm = 0, 234 .n_ext_ts = 0, 235 .n_per_out = 0, 236 .n_pins = 0, 237 .pps = 0, 238 .adjfine = mlx4_en_phc_adjfine, 239 .adjtime = mlx4_en_phc_adjtime, 240 .gettime64 = mlx4_en_phc_gettime, 241 .settime64 = mlx4_en_phc_settime, 242 .enable = mlx4_en_phc_enable, 243 }; 244 245 246 /* This function calculates the max shift that enables the user range 247 * of MLX4_EN_WRAP_AROUND_SEC values in the cycles register. 248 */ 249 static u32 freq_to_shift(u16 freq) 250 { 251 u32 freq_khz = freq * 1000; 252 u64 max_val_cycles = freq_khz * 1000 * MLX4_EN_WRAP_AROUND_SEC; 253 u64 max_val_cycles_rounded = 1ULL << fls64(max_val_cycles - 1); 254 /* calculate max possible multiplier in order to fit in 64bit */ 255 u64 max_mul = div64_u64(ULLONG_MAX, max_val_cycles_rounded); 256 257 /* This comes from the reverse of clocksource_khz2mult */ 258 return ilog2(div_u64(max_mul * freq_khz, 1000000)); 259 } 260 261 void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev) 262 { 263 struct mlx4_dev *dev = mdev->dev; 264 unsigned long flags; 265 266 /* mlx4_en_init_timestamp is called for each netdev. 267 * mdev->ptp_clock is common for all ports, skip initialization if 268 * was done for other port. 269 */ 270 if (mdev->ptp_clock) 271 return; 272 273 seqlock_init(&mdev->clock_lock); 274 275 memset(&mdev->cycles, 0, sizeof(mdev->cycles)); 276 mdev->cycles.read = mlx4_en_read_clock; 277 mdev->cycles.mask = CLOCKSOURCE_MASK(48); 278 mdev->cycles.shift = freq_to_shift(dev->caps.hca_core_clock); 279 mdev->cycles.mult = 280 clocksource_khz2mult(1000 * dev->caps.hca_core_clock, mdev->cycles.shift); 281 mdev->nominal_c_mult = mdev->cycles.mult; 282 283 write_seqlock_irqsave(&mdev->clock_lock, flags); 284 timecounter_init(&mdev->clock, &mdev->cycles, 285 ktime_to_ns(ktime_get_real())); 286 write_sequnlock_irqrestore(&mdev->clock_lock, flags); 287 288 /* Configure the PHC */ 289 mdev->ptp_clock_info = mlx4_en_ptp_clock_info; 290 snprintf(mdev->ptp_clock_info.name, 16, "mlx4 ptp"); 291 292 mdev->ptp_clock = ptp_clock_register(&mdev->ptp_clock_info, 293 &mdev->pdev->dev); 294 if (IS_ERR(mdev->ptp_clock)) { 295 mdev->ptp_clock = NULL; 296 mlx4_err(mdev, "ptp_clock_register failed\n"); 297 } else if (mdev->ptp_clock) { 298 mlx4_info(mdev, "registered PHC clock\n"); 299 } 300 301 } 302