1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * New driver for Marvell Yukon 2 chipset. 4 * Based on earlier sk98lin, and skge driver. 5 * 6 * This driver intentionally does not support all the features 7 * of the original driver such as link fail-over and link management because 8 * those should be done at higher levels. 9 * 10 * Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org> 11 */ 12 13 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 14 15 #include <linux/crc32.h> 16 #include <linux/kernel.h> 17 #include <linux/module.h> 18 #include <linux/netdevice.h> 19 #include <linux/dma-mapping.h> 20 #include <linux/etherdevice.h> 21 #include <linux/ethtool.h> 22 #include <linux/pci.h> 23 #include <linux/interrupt.h> 24 #include <linux/ip.h> 25 #include <linux/slab.h> 26 #include <net/ip.h> 27 #include <linux/tcp.h> 28 #include <linux/in.h> 29 #include <linux/delay.h> 30 #include <linux/workqueue.h> 31 #include <linux/if_vlan.h> 32 #include <linux/prefetch.h> 33 #include <linux/debugfs.h> 34 #include <linux/mii.h> 35 #include <linux/of_net.h> 36 #include <linux/dmi.h> 37 #include <linux/skbuff_ref.h> 38 39 #include <asm/irq.h> 40 41 #include "sky2.h" 42 43 #define DRV_NAME "sky2" 44 #define DRV_VERSION "1.30" 45 46 /* 47 * The Yukon II chipset takes 64 bit command blocks (called list elements) 48 * that are organized into three (receive, transmit, status) different rings 49 * similar to Tigon3. 50 */ 51 52 #define RX_LE_SIZE 1024 53 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le)) 54 #define RX_MAX_PENDING (RX_LE_SIZE/6 - 2) 55 #define RX_DEF_PENDING RX_MAX_PENDING 56 57 /* This is the worst case number of transmit list elements for a single skb: 58 * VLAN:GSO + CKSUM + Data + skb_frags * DMA 59 */ 60 #define MAX_SKB_TX_LE (2 + (sizeof(dma_addr_t)/sizeof(u32))*(MAX_SKB_FRAGS+1)) 61 #define TX_MIN_PENDING (MAX_SKB_TX_LE+1) 62 #define TX_MAX_PENDING 1024 63 #define TX_DEF_PENDING 63 64 65 #define TX_WATCHDOG (5 * HZ) 66 #define PHY_RETRIES 1000 67 68 #define SKY2_EEPROM_MAGIC 0x9955aabb 69 70 #define RING_NEXT(x, s) (((x)+1) & ((s)-1)) 71 72 static const u32 default_msg = 73 NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK 74 | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR 75 | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN; 76 77 static int debug = -1; /* defaults above */ 78 module_param(debug, int, 0); 79 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); 80 81 static int copybreak __read_mostly = 128; 82 module_param(copybreak, int, 0); 83 MODULE_PARM_DESC(copybreak, "Receive copy threshold"); 84 85 static int disable_msi = -1; 86 module_param(disable_msi, int, 0); 87 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); 88 89 static int legacy_pme = 0; 90 module_param(legacy_pme, int, 0); 91 MODULE_PARM_DESC(legacy_pme, "Legacy power management"); 92 93 static const struct pci_device_id sky2_id_table[] = { 94 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */ 95 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */ 96 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E01) }, /* SK-9E21M */ 97 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */ 98 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */ 99 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */ 100 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B03) }, /* DGE-550T */ 101 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */ 102 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */ 103 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */ 104 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, /* 88E8062 */ 105 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, /* 88E8021 */ 106 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, /* 88E8022 */ 107 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, /* 88E8061 */ 108 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, /* 88E8062 */ 109 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, /* 88E8035 */ 110 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */ 111 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */ 112 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */ 113 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */ 114 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */ 115 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */ 116 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */ 117 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */ 118 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */ 119 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */ 120 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */ 121 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */ 122 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */ 123 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, /* 88E8070 */ 124 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */ 125 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */ 126 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */ 127 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */ 128 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */ 129 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */ 130 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */ 131 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */ 132 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */ 133 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */ 134 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4381) }, /* 88E8059 */ 135 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4382) }, /* 88E8079 */ 136 { 0 } 137 }; 138 139 MODULE_DEVICE_TABLE(pci, sky2_id_table); 140 141 /* Avoid conditionals by using array */ 142 static const unsigned txqaddr[] = { Q_XA1, Q_XA2 }; 143 static const unsigned rxqaddr[] = { Q_R1, Q_R2 }; 144 static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 }; 145 146 static void sky2_set_multicast(struct net_device *dev); 147 static irqreturn_t sky2_intr(int irq, void *dev_id); 148 149 /* Access to PHY via serial interconnect */ 150 static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val) 151 { 152 int i; 153 154 gma_write16(hw, port, GM_SMI_DATA, val); 155 gma_write16(hw, port, GM_SMI_CTRL, 156 GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg)); 157 158 for (i = 0; i < PHY_RETRIES; i++) { 159 u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL); 160 if (ctrl == 0xffff) 161 goto io_error; 162 163 if (!(ctrl & GM_SMI_CT_BUSY)) 164 return 0; 165 166 udelay(10); 167 } 168 169 dev_warn(&hw->pdev->dev, "%s: phy write timeout\n", hw->dev[port]->name); 170 return -ETIMEDOUT; 171 172 io_error: 173 dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name); 174 return -EIO; 175 } 176 177 static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val) 178 { 179 int i; 180 181 gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) 182 | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD); 183 184 for (i = 0; i < PHY_RETRIES; i++) { 185 u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL); 186 if (ctrl == 0xffff) 187 goto io_error; 188 189 if (ctrl & GM_SMI_CT_RD_VAL) { 190 *val = gma_read16(hw, port, GM_SMI_DATA); 191 return 0; 192 } 193 194 udelay(10); 195 } 196 197 dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name); 198 return -ETIMEDOUT; 199 io_error: 200 dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name); 201 return -EIO; 202 } 203 204 static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg) 205 { 206 u16 v = 0; 207 __gm_phy_read(hw, port, reg, &v); 208 return v; 209 } 210 211 212 static void sky2_power_on(struct sky2_hw *hw) 213 { 214 /* switch power to VCC (WA for VAUX problem) */ 215 sky2_write8(hw, B0_POWER_CTRL, 216 PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON); 217 218 /* disable Core Clock Division, */ 219 sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS); 220 221 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1) 222 /* enable bits are inverted */ 223 sky2_write8(hw, B2_Y2_CLK_GATE, 224 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS | 225 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS | 226 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS); 227 else 228 sky2_write8(hw, B2_Y2_CLK_GATE, 0); 229 230 if (hw->flags & SKY2_HW_ADV_POWER_CTL) { 231 u32 reg; 232 233 sky2_pci_write32(hw, PCI_DEV_REG3, 0); 234 235 reg = sky2_pci_read32(hw, PCI_DEV_REG4); 236 /* set all bits to 0 except bits 15..12 and 8 */ 237 reg &= P_ASPM_CONTROL_MSK; 238 sky2_pci_write32(hw, PCI_DEV_REG4, reg); 239 240 reg = sky2_pci_read32(hw, PCI_DEV_REG5); 241 /* set all bits to 0 except bits 28 & 27 */ 242 reg &= P_CTL_TIM_VMAIN_AV_MSK; 243 sky2_pci_write32(hw, PCI_DEV_REG5, reg); 244 245 sky2_pci_write32(hw, PCI_CFG_REG_1, 0); 246 247 sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON); 248 249 /* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */ 250 reg = sky2_read32(hw, B2_GP_IO); 251 reg |= GLB_GPIO_STAT_RACE_DIS; 252 sky2_write32(hw, B2_GP_IO, reg); 253 254 sky2_read32(hw, B2_GP_IO); 255 } 256 257 /* Turn on "driver loaded" LED */ 258 sky2_write16(hw, B0_CTST, Y2_LED_STAT_ON); 259 } 260 261 static void sky2_power_aux(struct sky2_hw *hw) 262 { 263 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1) 264 sky2_write8(hw, B2_Y2_CLK_GATE, 0); 265 else 266 /* enable bits are inverted */ 267 sky2_write8(hw, B2_Y2_CLK_GATE, 268 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS | 269 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS | 270 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS); 271 272 /* switch power to VAUX if supported and PME from D3cold */ 273 if ( (sky2_read32(hw, B0_CTST) & Y2_VAUX_AVAIL) && 274 pci_pme_capable(hw->pdev, PCI_D3cold)) 275 sky2_write8(hw, B0_POWER_CTRL, 276 (PC_VAUX_ENA | PC_VCC_ENA | 277 PC_VAUX_ON | PC_VCC_OFF)); 278 279 /* turn off "driver loaded LED" */ 280 sky2_write16(hw, B0_CTST, Y2_LED_STAT_OFF); 281 } 282 283 static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port) 284 { 285 u16 reg; 286 287 /* disable all GMAC IRQ's */ 288 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0); 289 290 gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */ 291 gma_write16(hw, port, GM_MC_ADDR_H2, 0); 292 gma_write16(hw, port, GM_MC_ADDR_H3, 0); 293 gma_write16(hw, port, GM_MC_ADDR_H4, 0); 294 295 reg = gma_read16(hw, port, GM_RX_CTRL); 296 reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA; 297 gma_write16(hw, port, GM_RX_CTRL, reg); 298 } 299 300 /* flow control to advertise bits */ 301 static const u16 copper_fc_adv[] = { 302 [FC_NONE] = 0, 303 [FC_TX] = PHY_M_AN_ASP, 304 [FC_RX] = PHY_M_AN_PC, 305 [FC_BOTH] = PHY_M_AN_PC | PHY_M_AN_ASP, 306 }; 307 308 /* flow control to advertise bits when using 1000BaseX */ 309 static const u16 fiber_fc_adv[] = { 310 [FC_NONE] = PHY_M_P_NO_PAUSE_X, 311 [FC_TX] = PHY_M_P_ASYM_MD_X, 312 [FC_RX] = PHY_M_P_SYM_MD_X, 313 [FC_BOTH] = PHY_M_P_BOTH_MD_X, 314 }; 315 316 /* flow control to GMA disable bits */ 317 static const u16 gm_fc_disable[] = { 318 [FC_NONE] = GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS, 319 [FC_TX] = GM_GPCR_FC_RX_DIS, 320 [FC_RX] = GM_GPCR_FC_TX_DIS, 321 [FC_BOTH] = 0, 322 }; 323 324 325 static void sky2_phy_init(struct sky2_hw *hw, unsigned port) 326 { 327 struct sky2_port *sky2 = netdev_priv(hw->dev[port]); 328 u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg; 329 330 if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) && 331 !(hw->flags & SKY2_HW_NEWER_PHY)) { 332 u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); 333 334 ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | 335 PHY_M_EC_MAC_S_MSK); 336 ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ); 337 338 /* on PHY 88E1040 Rev.D0 (and newer) downshift control changed */ 339 if (hw->chip_id == CHIP_ID_YUKON_EC) 340 /* set downshift counter to 3x and enable downshift */ 341 ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA; 342 else 343 /* set master & slave downshift counter to 1x */ 344 ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1); 345 346 gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl); 347 } 348 349 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); 350 if (sky2_is_copper(hw)) { 351 if (!(hw->flags & SKY2_HW_GIGABIT)) { 352 /* enable automatic crossover */ 353 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1; 354 355 if (hw->chip_id == CHIP_ID_YUKON_FE_P && 356 hw->chip_rev == CHIP_REV_YU_FE2_A0) { 357 u16 spec; 358 359 /* Enable Class A driver for FE+ A0 */ 360 spec = gm_phy_read(hw, port, PHY_MARV_FE_SPEC_2); 361 spec |= PHY_M_FESC_SEL_CL_A; 362 gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec); 363 } 364 } else { 365 /* disable energy detect */ 366 ctrl &= ~PHY_M_PC_EN_DET_MSK; 367 368 /* enable automatic crossover */ 369 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO); 370 371 /* downshift on PHY 88E1112 and 88E1149 is changed */ 372 if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) && 373 (hw->flags & SKY2_HW_NEWER_PHY)) { 374 /* set downshift counter to 3x and enable downshift */ 375 ctrl &= ~PHY_M_PC_DSC_MSK; 376 ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA; 377 } 378 } 379 } else { 380 /* workaround for deviation #4.88 (CRC errors) */ 381 /* disable Automatic Crossover */ 382 383 ctrl &= ~PHY_M_PC_MDIX_MSK; 384 } 385 386 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); 387 388 /* special setup for PHY 88E1112 Fiber */ 389 if (hw->chip_id == CHIP_ID_YUKON_XL && (hw->flags & SKY2_HW_FIBRE_PHY)) { 390 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); 391 392 /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */ 393 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2); 394 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); 395 ctrl &= ~PHY_M_MAC_MD_MSK; 396 ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX); 397 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); 398 399 if (hw->pmd_type == 'P') { 400 /* select page 1 to access Fiber registers */ 401 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1); 402 403 /* for SFP-module set SIGDET polarity to low */ 404 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); 405 ctrl |= PHY_M_FIB_SIGD_POL; 406 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); 407 } 408 409 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); 410 } 411 412 ctrl = PHY_CT_RESET; 413 ct1000 = 0; 414 adv = PHY_AN_CSMA; 415 reg = 0; 416 417 if (sky2->flags & SKY2_FLAG_AUTO_SPEED) { 418 if (sky2_is_copper(hw)) { 419 if (sky2->advertising & ADVERTISED_1000baseT_Full) 420 ct1000 |= PHY_M_1000C_AFD; 421 if (sky2->advertising & ADVERTISED_1000baseT_Half) 422 ct1000 |= PHY_M_1000C_AHD; 423 if (sky2->advertising & ADVERTISED_100baseT_Full) 424 adv |= PHY_M_AN_100_FD; 425 if (sky2->advertising & ADVERTISED_100baseT_Half) 426 adv |= PHY_M_AN_100_HD; 427 if (sky2->advertising & ADVERTISED_10baseT_Full) 428 adv |= PHY_M_AN_10_FD; 429 if (sky2->advertising & ADVERTISED_10baseT_Half) 430 adv |= PHY_M_AN_10_HD; 431 432 } else { /* special defines for FIBER (88E1040S only) */ 433 if (sky2->advertising & ADVERTISED_1000baseT_Full) 434 adv |= PHY_M_AN_1000X_AFD; 435 if (sky2->advertising & ADVERTISED_1000baseT_Half) 436 adv |= PHY_M_AN_1000X_AHD; 437 } 438 439 /* Restart Auto-negotiation */ 440 ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG; 441 } else { 442 /* forced speed/duplex settings */ 443 ct1000 = PHY_M_1000C_MSE; 444 445 /* Disable auto update for duplex flow control and duplex */ 446 reg |= GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_SPD_DIS; 447 448 switch (sky2->speed) { 449 case SPEED_1000: 450 ctrl |= PHY_CT_SP1000; 451 reg |= GM_GPCR_SPEED_1000; 452 break; 453 case SPEED_100: 454 ctrl |= PHY_CT_SP100; 455 reg |= GM_GPCR_SPEED_100; 456 break; 457 } 458 459 if (sky2->duplex == DUPLEX_FULL) { 460 reg |= GM_GPCR_DUP_FULL; 461 ctrl |= PHY_CT_DUP_MD; 462 } else if (sky2->speed < SPEED_1000) 463 sky2->flow_mode = FC_NONE; 464 } 465 466 if (sky2->flags & SKY2_FLAG_AUTO_PAUSE) { 467 if (sky2_is_copper(hw)) 468 adv |= copper_fc_adv[sky2->flow_mode]; 469 else 470 adv |= fiber_fc_adv[sky2->flow_mode]; 471 } else { 472 reg |= GM_GPCR_AU_FCT_DIS; 473 reg |= gm_fc_disable[sky2->flow_mode]; 474 475 /* Forward pause packets to GMAC? */ 476 if (sky2->flow_mode & FC_RX) 477 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); 478 else 479 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); 480 } 481 482 gma_write16(hw, port, GM_GP_CTRL, reg); 483 484 if (hw->flags & SKY2_HW_GIGABIT) 485 gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); 486 487 gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv); 488 gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); 489 490 /* Setup Phy LED's */ 491 ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS); 492 ledover = 0; 493 494 switch (hw->chip_id) { 495 case CHIP_ID_YUKON_FE: 496 /* on 88E3082 these bits are at 11..9 (shifted left) */ 497 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1; 498 499 ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR); 500 501 /* delete ACT LED control bits */ 502 ctrl &= ~PHY_M_FELP_LED1_MSK; 503 /* change ACT LED control to blink mode */ 504 ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL); 505 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl); 506 break; 507 508 case CHIP_ID_YUKON_FE_P: 509 /* Enable Link Partner Next Page */ 510 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); 511 ctrl |= PHY_M_PC_ENA_LIP_NP; 512 513 /* disable Energy Detect and enable scrambler */ 514 ctrl &= ~(PHY_M_PC_ENA_ENE_DT | PHY_M_PC_DIS_SCRAMB); 515 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); 516 517 /* set LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED */ 518 ctrl = PHY_M_FELP_LED2_CTRL(LED_PAR_CTRL_ACT_BL) | 519 PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_LINK) | 520 PHY_M_FELP_LED0_CTRL(LED_PAR_CTRL_SPEED); 521 522 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl); 523 break; 524 525 case CHIP_ID_YUKON_XL: 526 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); 527 528 /* select page 3 to access LED control register */ 529 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); 530 531 /* set LED Function Control register */ 532 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, 533 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */ 534 PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */ 535 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */ 536 PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */ 537 538 /* set Polarity Control register */ 539 gm_phy_write(hw, port, PHY_MARV_PHY_STAT, 540 (PHY_M_POLC_LS1_P_MIX(4) | 541 PHY_M_POLC_IS0_P_MIX(4) | 542 PHY_M_POLC_LOS_CTRL(2) | 543 PHY_M_POLC_INIT_CTRL(2) | 544 PHY_M_POLC_STA1_CTRL(2) | 545 PHY_M_POLC_STA0_CTRL(2))); 546 547 /* restore page register */ 548 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); 549 break; 550 551 case CHIP_ID_YUKON_EC_U: 552 case CHIP_ID_YUKON_EX: 553 case CHIP_ID_YUKON_SUPR: 554 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); 555 556 /* select page 3 to access LED control register */ 557 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); 558 559 /* set LED Function Control register */ 560 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, 561 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */ 562 PHY_M_LEDC_INIT_CTRL(8) | /* 10 Mbps */ 563 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */ 564 PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */ 565 566 /* set Blink Rate in LED Timer Control Register */ 567 gm_phy_write(hw, port, PHY_MARV_INT_MASK, 568 ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS)); 569 /* restore page register */ 570 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); 571 break; 572 573 default: 574 /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */ 575 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; 576 577 /* turn off the Rx LED (LED_RX) */ 578 ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); 579 } 580 581 if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_UL_2) { 582 /* apply fixes in PHY AFE */ 583 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255); 584 585 /* increase differential signal amplitude in 10BASE-T */ 586 gm_phy_write(hw, port, 0x18, 0xaa99); 587 gm_phy_write(hw, port, 0x17, 0x2011); 588 589 if (hw->chip_id == CHIP_ID_YUKON_EC_U) { 590 /* fix for IEEE A/B Symmetry failure in 1000BASE-T */ 591 gm_phy_write(hw, port, 0x18, 0xa204); 592 gm_phy_write(hw, port, 0x17, 0x2002); 593 } 594 595 /* set page register to 0 */ 596 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); 597 } else if (hw->chip_id == CHIP_ID_YUKON_FE_P && 598 hw->chip_rev == CHIP_REV_YU_FE2_A0) { 599 /* apply workaround for integrated resistors calibration */ 600 gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17); 601 gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60); 602 } else if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) { 603 /* apply fixes in PHY AFE */ 604 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00ff); 605 606 /* apply RDAC termination workaround */ 607 gm_phy_write(hw, port, 24, 0x2800); 608 gm_phy_write(hw, port, 23, 0x2001); 609 610 /* set page register back to 0 */ 611 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); 612 } else if (hw->chip_id != CHIP_ID_YUKON_EX && 613 hw->chip_id < CHIP_ID_YUKON_SUPR) { 614 /* no effect on Yukon-XL */ 615 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); 616 617 if (!(sky2->flags & SKY2_FLAG_AUTO_SPEED) || 618 sky2->speed == SPEED_100) { 619 /* turn on 100 Mbps LED (LED_LINK100) */ 620 ledover |= PHY_M_LED_MO_100(MO_LED_ON); 621 } 622 623 if (ledover) 624 gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); 625 626 } else if (hw->chip_id == CHIP_ID_YUKON_PRM && 627 (sky2_read8(hw, B2_MAC_CFG) & 0xf) == 0x7) { 628 int i; 629 /* This a phy register setup workaround copied from vendor driver. */ 630 static const struct { 631 u16 reg, val; 632 } eee_afe[] = { 633 { 0x156, 0x58ce }, 634 { 0x153, 0x99eb }, 635 { 0x141, 0x8064 }, 636 /* { 0x155, 0x130b },*/ 637 { 0x000, 0x0000 }, 638 { 0x151, 0x8433 }, 639 { 0x14b, 0x8c44 }, 640 { 0x14c, 0x0f90 }, 641 { 0x14f, 0x39aa }, 642 /* { 0x154, 0x2f39 },*/ 643 { 0x14d, 0xba33 }, 644 { 0x144, 0x0048 }, 645 { 0x152, 0x2010 }, 646 /* { 0x158, 0x1223 },*/ 647 { 0x140, 0x4444 }, 648 { 0x154, 0x2f3b }, 649 { 0x158, 0xb203 }, 650 { 0x157, 0x2029 }, 651 }; 652 653 /* Start Workaround for OptimaEEE Rev.Z0 */ 654 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00fb); 655 656 gm_phy_write(hw, port, 1, 0x4099); 657 gm_phy_write(hw, port, 3, 0x1120); 658 gm_phy_write(hw, port, 11, 0x113c); 659 gm_phy_write(hw, port, 14, 0x8100); 660 gm_phy_write(hw, port, 15, 0x112a); 661 gm_phy_write(hw, port, 17, 0x1008); 662 663 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00fc); 664 gm_phy_write(hw, port, 1, 0x20b0); 665 666 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00ff); 667 668 for (i = 0; i < ARRAY_SIZE(eee_afe); i++) { 669 /* apply AFE settings */ 670 gm_phy_write(hw, port, 17, eee_afe[i].val); 671 gm_phy_write(hw, port, 16, eee_afe[i].reg | 1u<<13); 672 } 673 674 /* End Workaround for OptimaEEE */ 675 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); 676 677 /* Enable 10Base-Te (EEE) */ 678 if (hw->chip_id >= CHIP_ID_YUKON_PRM) { 679 reg = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); 680 gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, 681 reg | PHY_M_10B_TE_ENABLE); 682 } 683 } 684 685 /* Enable phy interrupt on auto-negotiation complete (or link up) */ 686 if (sky2->flags & SKY2_FLAG_AUTO_SPEED) 687 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL); 688 else 689 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); 690 } 691 692 static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD }; 693 static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA }; 694 695 static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port) 696 { 697 u32 reg1; 698 699 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); 700 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); 701 reg1 &= ~phy_power[port]; 702 703 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1) 704 reg1 |= coma_mode[port]; 705 706 sky2_pci_write32(hw, PCI_DEV_REG1, reg1); 707 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); 708 sky2_pci_read32(hw, PCI_DEV_REG1); 709 710 if (hw->chip_id == CHIP_ID_YUKON_FE) 711 gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE); 712 else if (hw->flags & SKY2_HW_ADV_POWER_CTL) 713 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); 714 } 715 716 static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port) 717 { 718 u32 reg1; 719 u16 ctrl; 720 721 /* release GPHY Control reset */ 722 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); 723 724 /* release GMAC reset */ 725 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR); 726 727 if (hw->flags & SKY2_HW_NEWER_PHY) { 728 /* select page 2 to access MAC control register */ 729 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2); 730 731 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); 732 /* allow GMII Power Down */ 733 ctrl &= ~PHY_M_MAC_GMIF_PUP; 734 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); 735 736 /* set page register back to 0 */ 737 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); 738 } 739 740 /* setup General Purpose Control Register */ 741 gma_write16(hw, port, GM_GP_CTRL, 742 GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 | 743 GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS | 744 GM_GPCR_AU_SPD_DIS); 745 746 if (hw->chip_id != CHIP_ID_YUKON_EC) { 747 if (hw->chip_id == CHIP_ID_YUKON_EC_U) { 748 /* select page 2 to access MAC control register */ 749 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2); 750 751 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); 752 /* enable Power Down */ 753 ctrl |= PHY_M_PC_POW_D_ENA; 754 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); 755 756 /* set page register back to 0 */ 757 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); 758 } 759 760 /* set IEEE compatible Power Down Mode (dev. #4.99) */ 761 gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN); 762 } 763 764 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); 765 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); 766 reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */ 767 sky2_pci_write32(hw, PCI_DEV_REG1, reg1); 768 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); 769 } 770 771 /* configure IPG according to used link speed */ 772 static void sky2_set_ipg(struct sky2_port *sky2) 773 { 774 u16 reg; 775 776 reg = gma_read16(sky2->hw, sky2->port, GM_SERIAL_MODE); 777 reg &= ~GM_SMOD_IPG_MSK; 778 if (sky2->speed > SPEED_100) 779 reg |= IPG_DATA_VAL(IPG_DATA_DEF_1000); 780 else 781 reg |= IPG_DATA_VAL(IPG_DATA_DEF_10_100); 782 gma_write16(sky2->hw, sky2->port, GM_SERIAL_MODE, reg); 783 } 784 785 /* Enable Rx/Tx */ 786 static void sky2_enable_rx_tx(struct sky2_port *sky2) 787 { 788 struct sky2_hw *hw = sky2->hw; 789 unsigned port = sky2->port; 790 u16 reg; 791 792 reg = gma_read16(hw, port, GM_GP_CTRL); 793 reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; 794 gma_write16(hw, port, GM_GP_CTRL, reg); 795 } 796 797 /* Force a renegotiation */ 798 static void sky2_phy_reinit(struct sky2_port *sky2) 799 { 800 spin_lock_bh(&sky2->phy_lock); 801 sky2_phy_init(sky2->hw, sky2->port); 802 sky2_enable_rx_tx(sky2); 803 spin_unlock_bh(&sky2->phy_lock); 804 } 805 806 /* Put device in state to listen for Wake On Lan */ 807 static void sky2_wol_init(struct sky2_port *sky2) 808 { 809 struct sky2_hw *hw = sky2->hw; 810 unsigned port = sky2->port; 811 enum flow_control save_mode; 812 u16 ctrl; 813 814 /* Bring hardware out of reset */ 815 sky2_write16(hw, B0_CTST, CS_RST_CLR); 816 sky2_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR); 817 818 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); 819 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR); 820 821 /* Force to 10/100 822 * sky2_reset will re-enable on resume 823 */ 824 save_mode = sky2->flow_mode; 825 ctrl = sky2->advertising; 826 827 sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full); 828 sky2->flow_mode = FC_NONE; 829 830 spin_lock_bh(&sky2->phy_lock); 831 sky2_phy_power_up(hw, port); 832 sky2_phy_init(hw, port); 833 spin_unlock_bh(&sky2->phy_lock); 834 835 sky2->flow_mode = save_mode; 836 sky2->advertising = ctrl; 837 838 /* Set GMAC to no flow control and auto update for speed/duplex */ 839 gma_write16(hw, port, GM_GP_CTRL, 840 GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA| 841 GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS); 842 843 /* Set WOL address */ 844 memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR), 845 sky2->netdev->dev_addr, ETH_ALEN); 846 847 /* Turn on appropriate WOL control bits */ 848 sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT); 849 ctrl = 0; 850 if (sky2->wol & WAKE_PHY) 851 ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT; 852 else 853 ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT; 854 855 if (sky2->wol & WAKE_MAGIC) 856 ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT; 857 else 858 ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT; 859 860 ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT; 861 sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl); 862 863 /* Disable PiG firmware */ 864 sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF); 865 866 /* Needed by some broken BIOSes, use PCI rather than PCI-e for WOL */ 867 if (legacy_pme) { 868 u32 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); 869 reg1 |= PCI_Y2_PME_LEGACY; 870 sky2_pci_write32(hw, PCI_DEV_REG1, reg1); 871 } 872 873 /* block receiver */ 874 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); 875 sky2_read32(hw, B0_CTST); 876 } 877 878 static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port) 879 { 880 struct net_device *dev = hw->dev[port]; 881 882 if ( (hw->chip_id == CHIP_ID_YUKON_EX && 883 hw->chip_rev != CHIP_REV_YU_EX_A0) || 884 hw->chip_id >= CHIP_ID_YUKON_FE_P) { 885 /* Yukon-Extreme B0 and further Extreme devices */ 886 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA); 887 } else if (dev->mtu > ETH_DATA_LEN) { 888 /* set Tx GMAC FIFO Almost Empty Threshold */ 889 sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), 890 (ECU_JUMBO_WM << 16) | ECU_AE_THR); 891 892 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS); 893 } else 894 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA); 895 } 896 897 static void sky2_mac_init(struct sky2_hw *hw, unsigned port) 898 { 899 struct sky2_port *sky2 = netdev_priv(hw->dev[port]); 900 u16 reg; 901 u32 rx_reg; 902 int i; 903 const u8 *addr = hw->dev[port]->dev_addr; 904 905 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); 906 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); 907 908 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR); 909 910 if (hw->chip_id == CHIP_ID_YUKON_XL && 911 hw->chip_rev == CHIP_REV_YU_XL_A0 && 912 port == 1) { 913 /* WA DEV_472 -- looks like crossed wires on port 2 */ 914 /* clear GMAC 1 Control reset */ 915 sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR); 916 do { 917 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET); 918 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR); 919 } while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL || 920 gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 || 921 gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0); 922 } 923 924 sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC)); 925 926 /* Enable Transmit FIFO Underrun */ 927 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK); 928 929 spin_lock_bh(&sky2->phy_lock); 930 sky2_phy_power_up(hw, port); 931 sky2_phy_init(hw, port); 932 spin_unlock_bh(&sky2->phy_lock); 933 934 /* MIB clear */ 935 reg = gma_read16(hw, port, GM_PHY_ADDR); 936 gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR); 937 938 for (i = GM_MIB_CNT_BASE; i <= GM_MIB_CNT_END; i += 4) 939 gma_read16(hw, port, i); 940 gma_write16(hw, port, GM_PHY_ADDR, reg); 941 942 /* transmit control */ 943 gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF)); 944 945 /* receive control reg: unicast + multicast + no FCS */ 946 gma_write16(hw, port, GM_RX_CTRL, 947 GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA); 948 949 /* transmit flow control */ 950 gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff); 951 952 /* transmit parameter */ 953 gma_write16(hw, port, GM_TX_PARAM, 954 TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) | 955 TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) | 956 TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) | 957 TX_BACK_OFF_LIM(TX_BOF_LIM_DEF)); 958 959 /* serial mode register */ 960 reg = DATA_BLIND_VAL(DATA_BLIND_DEF) | 961 GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF_1000); 962 963 if (hw->dev[port]->mtu > ETH_DATA_LEN) 964 reg |= GM_SMOD_JUMBO_ENA; 965 966 if (hw->chip_id == CHIP_ID_YUKON_EC_U && 967 hw->chip_rev == CHIP_REV_YU_EC_U_B1) 968 reg |= GM_NEW_FLOW_CTRL; 969 970 gma_write16(hw, port, GM_SERIAL_MODE, reg); 971 972 /* virtual address for data */ 973 gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr); 974 975 /* physical address: used for pause frames */ 976 gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr); 977 978 /* ignore counter overflows */ 979 gma_write16(hw, port, GM_TX_IRQ_MSK, 0); 980 gma_write16(hw, port, GM_RX_IRQ_MSK, 0); 981 gma_write16(hw, port, GM_TR_IRQ_MSK, 0); 982 983 /* Configure Rx MAC FIFO */ 984 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); 985 rx_reg = GMF_OPER_ON | GMF_RX_F_FL_ON; 986 if (hw->chip_id == CHIP_ID_YUKON_EX || 987 hw->chip_id == CHIP_ID_YUKON_FE_P) 988 rx_reg |= GMF_RX_OVER_ON; 989 990 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg); 991 992 if (hw->chip_id == CHIP_ID_YUKON_XL) { 993 /* Hardware errata - clear flush mask */ 994 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), 0); 995 } else { 996 /* Flush Rx MAC FIFO on any flow control or error */ 997 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR); 998 } 999 1000 /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */ 1001 reg = RX_GMF_FL_THR_DEF + 1; 1002 /* Another magic mystery workaround from sk98lin */ 1003 if (hw->chip_id == CHIP_ID_YUKON_FE_P && 1004 hw->chip_rev == CHIP_REV_YU_FE2_A0) 1005 reg = 0x178; 1006 sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), reg); 1007 1008 /* Configure Tx MAC FIFO */ 1009 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); 1010 sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); 1011 1012 /* On chips without ram buffer, pause is controlled by MAC level */ 1013 if (!(hw->flags & SKY2_HW_RAM_BUFFER)) { 1014 /* Pause threshold is scaled by 8 in bytes */ 1015 if (hw->chip_id == CHIP_ID_YUKON_FE_P && 1016 hw->chip_rev == CHIP_REV_YU_FE2_A0) 1017 reg = 1568 / 8; 1018 else 1019 reg = 1024 / 8; 1020 sky2_write16(hw, SK_REG(port, RX_GMF_UP_THR), reg); 1021 sky2_write16(hw, SK_REG(port, RX_GMF_LP_THR), 768 / 8); 1022 1023 sky2_set_tx_stfwd(hw, port); 1024 } 1025 1026 if (hw->chip_id == CHIP_ID_YUKON_FE_P && 1027 hw->chip_rev == CHIP_REV_YU_FE2_A0) { 1028 /* disable dynamic watermark */ 1029 reg = sky2_read16(hw, SK_REG(port, TX_GMF_EA)); 1030 reg &= ~TX_DYN_WM_ENA; 1031 sky2_write16(hw, SK_REG(port, TX_GMF_EA), reg); 1032 } 1033 } 1034 1035 /* Assign Ram Buffer allocation to queue */ 1036 static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space) 1037 { 1038 u32 end; 1039 1040 /* convert from K bytes to qwords used for hw register */ 1041 start *= 1024/8; 1042 space *= 1024/8; 1043 end = start + space - 1; 1044 1045 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR); 1046 sky2_write32(hw, RB_ADDR(q, RB_START), start); 1047 sky2_write32(hw, RB_ADDR(q, RB_END), end); 1048 sky2_write32(hw, RB_ADDR(q, RB_WP), start); 1049 sky2_write32(hw, RB_ADDR(q, RB_RP), start); 1050 1051 if (q == Q_R1 || q == Q_R2) { 1052 u32 tp = space - space/4; 1053 1054 /* On receive queue's set the thresholds 1055 * give receiver priority when > 3/4 full 1056 * send pause when down to 2K 1057 */ 1058 sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp); 1059 sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2); 1060 1061 tp = space - 8192/8; 1062 sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp); 1063 sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4); 1064 } else { 1065 /* Enable store & forward on Tx queue's because 1066 * Tx FIFO is only 1K on Yukon 1067 */ 1068 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD); 1069 } 1070 1071 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD); 1072 sky2_read8(hw, RB_ADDR(q, RB_CTRL)); 1073 } 1074 1075 /* Setup Bus Memory Interface */ 1076 static void sky2_qset(struct sky2_hw *hw, u16 q) 1077 { 1078 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET); 1079 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT); 1080 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON); 1081 sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT); 1082 } 1083 1084 /* Setup prefetch unit registers. This is the interface between 1085 * hardware and driver list elements 1086 */ 1087 static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr, 1088 dma_addr_t addr, u32 last) 1089 { 1090 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); 1091 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR); 1092 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), upper_32_bits(addr)); 1093 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), lower_32_bits(addr)); 1094 sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last); 1095 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON); 1096 1097 sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL)); 1098 } 1099 1100 static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot) 1101 { 1102 struct sky2_tx_le *le = sky2->tx_le + *slot; 1103 1104 *slot = RING_NEXT(*slot, sky2->tx_ring_size); 1105 le->ctrl = 0; 1106 return le; 1107 } 1108 1109 static void tx_init(struct sky2_port *sky2) 1110 { 1111 struct sky2_tx_le *le; 1112 1113 sky2->tx_prod = sky2->tx_cons = 0; 1114 sky2->tx_tcpsum = 0; 1115 sky2->tx_last_mss = 0; 1116 netdev_reset_queue(sky2->netdev); 1117 1118 le = get_tx_le(sky2, &sky2->tx_prod); 1119 le->addr = 0; 1120 le->opcode = OP_ADDR64 | HW_OWNER; 1121 sky2->tx_last_upper = 0; 1122 } 1123 1124 /* Update chip's next pointer */ 1125 static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx) 1126 { 1127 /* Make sure write' to descriptors are complete before we tell hardware */ 1128 wmb(); 1129 sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx); 1130 } 1131 1132 1133 static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2) 1134 { 1135 struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put; 1136 sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE); 1137 le->ctrl = 0; 1138 return le; 1139 } 1140 1141 static unsigned sky2_get_rx_threshold(struct sky2_port *sky2) 1142 { 1143 unsigned size; 1144 1145 /* Space needed for frame data + headers rounded up */ 1146 size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8); 1147 1148 /* Stopping point for hardware truncation */ 1149 return (size - 8) / sizeof(u32); 1150 } 1151 1152 static unsigned sky2_get_rx_data_size(struct sky2_port *sky2) 1153 { 1154 struct rx_ring_info *re; 1155 unsigned size; 1156 1157 /* Space needed for frame data + headers rounded up */ 1158 size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8); 1159 1160 sky2->rx_nfrags = size >> PAGE_SHIFT; 1161 BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr)); 1162 1163 /* Compute residue after pages */ 1164 size -= sky2->rx_nfrags << PAGE_SHIFT; 1165 1166 /* Optimize to handle small packets and headers */ 1167 if (size < copybreak) 1168 size = copybreak; 1169 if (size < ETH_HLEN) 1170 size = ETH_HLEN; 1171 1172 return size; 1173 } 1174 1175 /* Build description to hardware for one receive segment */ 1176 static void sky2_rx_add(struct sky2_port *sky2, u8 op, 1177 dma_addr_t map, unsigned len) 1178 { 1179 struct sky2_rx_le *le; 1180 1181 if (sizeof(dma_addr_t) > sizeof(u32)) { 1182 le = sky2_next_rx(sky2); 1183 le->addr = cpu_to_le32(upper_32_bits(map)); 1184 le->opcode = OP_ADDR64 | HW_OWNER; 1185 } 1186 1187 le = sky2_next_rx(sky2); 1188 le->addr = cpu_to_le32(lower_32_bits(map)); 1189 le->length = cpu_to_le16(len); 1190 le->opcode = op | HW_OWNER; 1191 } 1192 1193 /* Build description to hardware for one possibly fragmented skb */ 1194 static void sky2_rx_submit(struct sky2_port *sky2, 1195 const struct rx_ring_info *re) 1196 { 1197 int i; 1198 1199 sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size); 1200 1201 for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++) 1202 sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE); 1203 } 1204 1205 1206 static int sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re, 1207 unsigned size) 1208 { 1209 struct sk_buff *skb = re->skb; 1210 int i; 1211 1212 re->data_addr = dma_map_single(&pdev->dev, skb->data, size, 1213 DMA_FROM_DEVICE); 1214 if (dma_mapping_error(&pdev->dev, re->data_addr)) 1215 goto mapping_error; 1216 1217 dma_unmap_len_set(re, data_size, size); 1218 1219 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { 1220 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; 1221 1222 re->frag_addr[i] = skb_frag_dma_map(&pdev->dev, frag, 0, 1223 skb_frag_size(frag), 1224 DMA_FROM_DEVICE); 1225 1226 if (dma_mapping_error(&pdev->dev, re->frag_addr[i])) 1227 goto map_page_error; 1228 } 1229 return 0; 1230 1231 map_page_error: 1232 while (--i >= 0) { 1233 dma_unmap_page(&pdev->dev, re->frag_addr[i], 1234 skb_frag_size(&skb_shinfo(skb)->frags[i]), 1235 DMA_FROM_DEVICE); 1236 } 1237 1238 dma_unmap_single(&pdev->dev, re->data_addr, 1239 dma_unmap_len(re, data_size), DMA_FROM_DEVICE); 1240 1241 mapping_error: 1242 if (net_ratelimit()) 1243 dev_warn(&pdev->dev, "%s: rx mapping error\n", 1244 skb->dev->name); 1245 return -EIO; 1246 } 1247 1248 static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re) 1249 { 1250 struct sk_buff *skb = re->skb; 1251 int i; 1252 1253 dma_unmap_single(&pdev->dev, re->data_addr, 1254 dma_unmap_len(re, data_size), DMA_FROM_DEVICE); 1255 1256 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) 1257 dma_unmap_page(&pdev->dev, re->frag_addr[i], 1258 skb_frag_size(&skb_shinfo(skb)->frags[i]), 1259 DMA_FROM_DEVICE); 1260 } 1261 1262 /* Tell chip where to start receive checksum. 1263 * Actually has two checksums, but set both same to avoid possible byte 1264 * order problems. 1265 */ 1266 static void rx_set_checksum(struct sky2_port *sky2) 1267 { 1268 struct sky2_rx_le *le = sky2_next_rx(sky2); 1269 1270 le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN); 1271 le->ctrl = 0; 1272 le->opcode = OP_TCPSTART | HW_OWNER; 1273 1274 sky2_write32(sky2->hw, 1275 Q_ADDR(rxqaddr[sky2->port], Q_CSR), 1276 (sky2->netdev->features & NETIF_F_RXCSUM) 1277 ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); 1278 } 1279 1280 /* Enable/disable receive hash calculation (RSS) */ 1281 static void rx_set_rss(struct net_device *dev, netdev_features_t features) 1282 { 1283 struct sky2_port *sky2 = netdev_priv(dev); 1284 struct sky2_hw *hw = sky2->hw; 1285 int i, nkeys = 4; 1286 1287 /* Supports IPv6 and other modes */ 1288 if (hw->flags & SKY2_HW_NEW_LE) { 1289 nkeys = 10; 1290 sky2_write32(hw, SK_REG(sky2->port, RSS_CFG), HASH_ALL); 1291 } 1292 1293 /* Program RSS initial values */ 1294 if (features & NETIF_F_RXHASH) { 1295 u32 rss_key[10]; 1296 1297 netdev_rss_key_fill(rss_key, sizeof(rss_key)); 1298 for (i = 0; i < nkeys; i++) 1299 sky2_write32(hw, SK_REG(sky2->port, RSS_KEY + i * 4), 1300 rss_key[i]); 1301 1302 /* Need to turn on (undocumented) flag to make hashing work */ 1303 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), 1304 RX_STFW_ENA); 1305 1306 sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR), 1307 BMU_ENA_RX_RSS_HASH); 1308 } else 1309 sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR), 1310 BMU_DIS_RX_RSS_HASH); 1311 } 1312 1313 /* 1314 * The RX Stop command will not work for Yukon-2 if the BMU does not 1315 * reach the end of packet and since we can't make sure that we have 1316 * incoming data, we must reset the BMU while it is not doing a DMA 1317 * transfer. Since it is possible that the RX path is still active, 1318 * the RX RAM buffer will be stopped first, so any possible incoming 1319 * data will not trigger a DMA. After the RAM buffer is stopped, the 1320 * BMU is polled until any DMA in progress is ended and only then it 1321 * will be reset. 1322 */ 1323 static void sky2_rx_stop(struct sky2_port *sky2) 1324 { 1325 struct sky2_hw *hw = sky2->hw; 1326 unsigned rxq = rxqaddr[sky2->port]; 1327 int i; 1328 1329 /* disable the RAM Buffer receive queue */ 1330 sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD); 1331 1332 for (i = 0; i < 0xffff; i++) 1333 if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL)) 1334 == sky2_read8(hw, RB_ADDR(rxq, Q_RL))) 1335 goto stopped; 1336 1337 netdev_warn(sky2->netdev, "receiver stop failed\n"); 1338 stopped: 1339 sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST); 1340 1341 /* reset the Rx prefetch unit */ 1342 sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); 1343 } 1344 1345 /* Clean out receive buffer area, assumes receiver hardware stopped */ 1346 static void sky2_rx_clean(struct sky2_port *sky2) 1347 { 1348 unsigned i; 1349 1350 if (sky2->rx_le) 1351 memset(sky2->rx_le, 0, RX_LE_BYTES); 1352 1353 for (i = 0; i < sky2->rx_pending; i++) { 1354 struct rx_ring_info *re = sky2->rx_ring + i; 1355 1356 if (re->skb) { 1357 sky2_rx_unmap_skb(sky2->hw->pdev, re); 1358 kfree_skb(re->skb); 1359 re->skb = NULL; 1360 } 1361 } 1362 } 1363 1364 /* Basic MII support */ 1365 static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) 1366 { 1367 struct mii_ioctl_data *data = if_mii(ifr); 1368 struct sky2_port *sky2 = netdev_priv(dev); 1369 struct sky2_hw *hw = sky2->hw; 1370 int err = -EOPNOTSUPP; 1371 1372 if (!netif_running(dev)) 1373 return -ENODEV; /* Phy still in reset */ 1374 1375 switch (cmd) { 1376 case SIOCGMIIPHY: 1377 data->phy_id = PHY_ADDR_MARV; 1378 1379 fallthrough; 1380 case SIOCGMIIREG: { 1381 u16 val = 0; 1382 1383 spin_lock_bh(&sky2->phy_lock); 1384 err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val); 1385 spin_unlock_bh(&sky2->phy_lock); 1386 1387 data->val_out = val; 1388 break; 1389 } 1390 1391 case SIOCSMIIREG: 1392 spin_lock_bh(&sky2->phy_lock); 1393 err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f, 1394 data->val_in); 1395 spin_unlock_bh(&sky2->phy_lock); 1396 break; 1397 } 1398 return err; 1399 } 1400 1401 #define SKY2_VLAN_OFFLOADS (NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO) 1402 1403 static void sky2_vlan_mode(struct net_device *dev, netdev_features_t features) 1404 { 1405 struct sky2_port *sky2 = netdev_priv(dev); 1406 struct sky2_hw *hw = sky2->hw; 1407 u16 port = sky2->port; 1408 1409 if (features & NETIF_F_HW_VLAN_CTAG_RX) 1410 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), 1411 RX_VLAN_STRIP_ON); 1412 else 1413 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), 1414 RX_VLAN_STRIP_OFF); 1415 1416 if (features & NETIF_F_HW_VLAN_CTAG_TX) { 1417 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), 1418 TX_VLAN_TAG_ON); 1419 1420 dev->vlan_features |= SKY2_VLAN_OFFLOADS; 1421 } else { 1422 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), 1423 TX_VLAN_TAG_OFF); 1424 1425 /* Can't do transmit offload of vlan without hw vlan */ 1426 dev->vlan_features &= ~SKY2_VLAN_OFFLOADS; 1427 } 1428 } 1429 1430 /* Amount of required worst case padding in rx buffer */ 1431 static inline unsigned sky2_rx_pad(const struct sky2_hw *hw) 1432 { 1433 return (hw->flags & SKY2_HW_RAM_BUFFER) ? 8 : 2; 1434 } 1435 1436 /* 1437 * Allocate an skb for receiving. If the MTU is large enough 1438 * make the skb non-linear with a fragment list of pages. 1439 */ 1440 static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2, gfp_t gfp) 1441 { 1442 struct sk_buff *skb; 1443 int i; 1444 1445 skb = __netdev_alloc_skb(sky2->netdev, 1446 sky2->rx_data_size + sky2_rx_pad(sky2->hw), 1447 gfp); 1448 if (!skb) 1449 goto nomem; 1450 1451 if (sky2->hw->flags & SKY2_HW_RAM_BUFFER) { 1452 unsigned char *start; 1453 /* 1454 * Workaround for a bug in FIFO that cause hang 1455 * if the FIFO if the receive buffer is not 64 byte aligned. 1456 * The buffer returned from netdev_alloc_skb is 1457 * aligned except if slab debugging is enabled. 1458 */ 1459 start = PTR_ALIGN(skb->data, 8); 1460 skb_reserve(skb, start - skb->data); 1461 } else 1462 skb_reserve(skb, NET_IP_ALIGN); 1463 1464 for (i = 0; i < sky2->rx_nfrags; i++) { 1465 struct page *page = alloc_page(gfp); 1466 1467 if (!page) 1468 goto free_partial; 1469 skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE); 1470 } 1471 1472 return skb; 1473 free_partial: 1474 kfree_skb(skb); 1475 nomem: 1476 return NULL; 1477 } 1478 1479 static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq) 1480 { 1481 sky2_put_idx(sky2->hw, rxq, sky2->rx_put); 1482 } 1483 1484 static int sky2_alloc_rx_skbs(struct sky2_port *sky2) 1485 { 1486 struct sky2_hw *hw = sky2->hw; 1487 unsigned i; 1488 1489 sky2->rx_data_size = sky2_get_rx_data_size(sky2); 1490 1491 /* Fill Rx ring */ 1492 for (i = 0; i < sky2->rx_pending; i++) { 1493 struct rx_ring_info *re = sky2->rx_ring + i; 1494 1495 re->skb = sky2_rx_alloc(sky2, GFP_KERNEL); 1496 if (!re->skb) 1497 return -ENOMEM; 1498 1499 if (sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size)) { 1500 dev_kfree_skb(re->skb); 1501 re->skb = NULL; 1502 return -ENOMEM; 1503 } 1504 } 1505 return 0; 1506 } 1507 1508 /* 1509 * Setup receiver buffer pool. 1510 * Normal case this ends up creating one list element for skb 1511 * in the receive ring. Worst case if using large MTU and each 1512 * allocation falls on a different 64 bit region, that results 1513 * in 6 list elements per ring entry. 1514 * One element is used for checksum enable/disable, and one 1515 * extra to avoid wrap. 1516 */ 1517 static void sky2_rx_start(struct sky2_port *sky2) 1518 { 1519 struct sky2_hw *hw = sky2->hw; 1520 struct rx_ring_info *re; 1521 unsigned rxq = rxqaddr[sky2->port]; 1522 unsigned i, thresh; 1523 1524 sky2->rx_put = sky2->rx_next = 0; 1525 sky2_qset(hw, rxq); 1526 1527 /* On PCI express lowering the watermark gives better performance */ 1528 if (pci_is_pcie(hw->pdev)) 1529 sky2_write32(hw, Q_ADDR(rxq, Q_WM), BMU_WM_PEX); 1530 1531 /* These chips have no ram buffer? 1532 * MAC Rx RAM Read is controlled by hardware 1533 */ 1534 if (hw->chip_id == CHIP_ID_YUKON_EC_U && 1535 hw->chip_rev > CHIP_REV_YU_EC_U_A0) 1536 sky2_write32(hw, Q_ADDR(rxq, Q_TEST), F_M_RX_RAM_DIS); 1537 1538 sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1); 1539 1540 if (!(hw->flags & SKY2_HW_NEW_LE)) 1541 rx_set_checksum(sky2); 1542 1543 if (!(hw->flags & SKY2_HW_RSS_BROKEN)) 1544 rx_set_rss(sky2->netdev, sky2->netdev->features); 1545 1546 /* submit Rx ring */ 1547 for (i = 0; i < sky2->rx_pending; i++) { 1548 re = sky2->rx_ring + i; 1549 sky2_rx_submit(sky2, re); 1550 } 1551 1552 /* 1553 * The receiver hangs if it receives frames larger than the 1554 * packet buffer. As a workaround, truncate oversize frames, but 1555 * the register is limited to 9 bits, so if you do frames > 2052 1556 * you better get the MTU right! 1557 */ 1558 thresh = sky2_get_rx_threshold(sky2); 1559 if (thresh > 0x1ff) 1560 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF); 1561 else { 1562 sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh); 1563 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON); 1564 } 1565 1566 /* Tell chip about available buffers */ 1567 sky2_rx_update(sky2, rxq); 1568 1569 if (hw->chip_id == CHIP_ID_YUKON_EX || 1570 hw->chip_id == CHIP_ID_YUKON_SUPR) { 1571 /* 1572 * Disable flushing of non ASF packets; 1573 * must be done after initializing the BMUs; 1574 * drivers without ASF support should do this too, otherwise 1575 * it may happen that they cannot run on ASF devices; 1576 * remember that the MAC FIFO isn't reset during initialization. 1577 */ 1578 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_MACSEC_FLUSH_OFF); 1579 } 1580 1581 if (hw->chip_id >= CHIP_ID_YUKON_SUPR) { 1582 /* Enable RX Home Address & Routing Header checksum fix */ 1583 sky2_write16(hw, SK_REG(sky2->port, RX_GMF_FL_CTRL), 1584 RX_IPV6_SA_MOB_ENA | RX_IPV6_DA_MOB_ENA); 1585 1586 /* Enable TX Home Address & Routing Header checksum fix */ 1587 sky2_write32(hw, Q_ADDR(txqaddr[sky2->port], Q_TEST), 1588 TBMU_TEST_HOME_ADD_FIX_EN | TBMU_TEST_ROUTING_ADD_FIX_EN); 1589 } 1590 } 1591 1592 static int sky2_alloc_buffers(struct sky2_port *sky2) 1593 { 1594 struct sky2_hw *hw = sky2->hw; 1595 1596 /* must be power of 2 */ 1597 sky2->tx_le = dma_alloc_coherent(&hw->pdev->dev, 1598 sky2->tx_ring_size * sizeof(struct sky2_tx_le), 1599 &sky2->tx_le_map, GFP_KERNEL); 1600 if (!sky2->tx_le) 1601 goto nomem; 1602 1603 sky2->tx_ring = kcalloc(sky2->tx_ring_size, sizeof(struct tx_ring_info), 1604 GFP_KERNEL); 1605 if (!sky2->tx_ring) 1606 goto nomem; 1607 1608 sky2->rx_le = dma_alloc_coherent(&hw->pdev->dev, RX_LE_BYTES, 1609 &sky2->rx_le_map, GFP_KERNEL); 1610 if (!sky2->rx_le) 1611 goto nomem; 1612 1613 sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info), 1614 GFP_KERNEL); 1615 if (!sky2->rx_ring) 1616 goto nomem; 1617 1618 return sky2_alloc_rx_skbs(sky2); 1619 nomem: 1620 return -ENOMEM; 1621 } 1622 1623 static void sky2_free_buffers(struct sky2_port *sky2) 1624 { 1625 struct sky2_hw *hw = sky2->hw; 1626 1627 sky2_rx_clean(sky2); 1628 1629 if (sky2->rx_le) { 1630 dma_free_coherent(&hw->pdev->dev, RX_LE_BYTES, sky2->rx_le, 1631 sky2->rx_le_map); 1632 sky2->rx_le = NULL; 1633 } 1634 if (sky2->tx_le) { 1635 dma_free_coherent(&hw->pdev->dev, 1636 sky2->tx_ring_size * sizeof(struct sky2_tx_le), 1637 sky2->tx_le, sky2->tx_le_map); 1638 sky2->tx_le = NULL; 1639 } 1640 kfree(sky2->tx_ring); 1641 kfree(sky2->rx_ring); 1642 1643 sky2->tx_ring = NULL; 1644 sky2->rx_ring = NULL; 1645 } 1646 1647 static void sky2_hw_up(struct sky2_port *sky2) 1648 { 1649 struct sky2_hw *hw = sky2->hw; 1650 unsigned port = sky2->port; 1651 u32 ramsize; 1652 int cap; 1653 struct net_device *otherdev = hw->dev[sky2->port^1]; 1654 1655 tx_init(sky2); 1656 1657 /* 1658 * On dual port PCI-X card, there is an problem where status 1659 * can be received out of order due to split transactions 1660 */ 1661 if (otherdev && netif_running(otherdev) && 1662 (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) { 1663 u16 cmd; 1664 1665 cmd = sky2_pci_read16(hw, cap + PCI_X_CMD); 1666 cmd &= ~PCI_X_CMD_MAX_SPLIT; 1667 sky2_pci_write16(hw, cap + PCI_X_CMD, cmd); 1668 } 1669 1670 sky2_mac_init(hw, port); 1671 1672 /* Register is number of 4K blocks on internal RAM buffer. */ 1673 ramsize = sky2_read8(hw, B2_E_0) * 4; 1674 if (ramsize > 0) { 1675 u32 rxspace; 1676 1677 netdev_dbg(sky2->netdev, "ram buffer %dK\n", ramsize); 1678 if (ramsize < 16) 1679 rxspace = ramsize / 2; 1680 else 1681 rxspace = 8 + (2*(ramsize - 16))/3; 1682 1683 sky2_ramset(hw, rxqaddr[port], 0, rxspace); 1684 sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace); 1685 1686 /* Make sure SyncQ is disabled */ 1687 sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL), 1688 RB_RST_SET); 1689 } 1690 1691 sky2_qset(hw, txqaddr[port]); 1692 1693 /* This is copied from sk98lin 10.0.5.3; no one tells me about erratta's */ 1694 if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev == CHIP_REV_YU_EX_B0) 1695 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_TEST), F_TX_CHK_AUTO_OFF); 1696 1697 /* Set almost empty threshold */ 1698 if (hw->chip_id == CHIP_ID_YUKON_EC_U && 1699 hw->chip_rev == CHIP_REV_YU_EC_U_A0) 1700 sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV); 1701 1702 sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, 1703 sky2->tx_ring_size - 1); 1704 1705 sky2_vlan_mode(sky2->netdev, sky2->netdev->features); 1706 netdev_update_features(sky2->netdev); 1707 1708 sky2_rx_start(sky2); 1709 } 1710 1711 /* Setup device IRQ and enable napi to process */ 1712 static int sky2_setup_irq(struct sky2_hw *hw, const char *name) 1713 { 1714 struct pci_dev *pdev = hw->pdev; 1715 int err; 1716 1717 err = request_irq(pdev->irq, sky2_intr, 1718 (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED, 1719 name, hw); 1720 if (err) 1721 dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); 1722 else { 1723 hw->flags |= SKY2_HW_IRQ_SETUP; 1724 1725 napi_enable(&hw->napi); 1726 sky2_write32(hw, B0_IMSK, Y2_IS_BASE); 1727 sky2_read32(hw, B0_IMSK); 1728 } 1729 1730 return err; 1731 } 1732 1733 1734 /* Bring up network interface. */ 1735 static int sky2_open(struct net_device *dev) 1736 { 1737 struct sky2_port *sky2 = netdev_priv(dev); 1738 struct sky2_hw *hw = sky2->hw; 1739 unsigned port = sky2->port; 1740 u32 imask; 1741 int err; 1742 1743 netif_carrier_off(dev); 1744 1745 err = sky2_alloc_buffers(sky2); 1746 if (err) 1747 goto err_out; 1748 1749 /* With single port, IRQ is setup when device is brought up */ 1750 if (hw->ports == 1 && (err = sky2_setup_irq(hw, dev->name))) 1751 goto err_out; 1752 1753 sky2_hw_up(sky2); 1754 1755 /* Enable interrupts from phy/mac for port */ 1756 imask = sky2_read32(hw, B0_IMSK); 1757 1758 if (hw->chip_id == CHIP_ID_YUKON_OPT || 1759 hw->chip_id == CHIP_ID_YUKON_PRM || 1760 hw->chip_id == CHIP_ID_YUKON_OP_2) 1761 imask |= Y2_IS_PHY_QLNK; /* enable PHY Quick Link */ 1762 1763 imask |= portirq_msk[port]; 1764 sky2_write32(hw, B0_IMSK, imask); 1765 sky2_read32(hw, B0_IMSK); 1766 1767 netif_info(sky2, ifup, dev, "enabling interface\n"); 1768 1769 return 0; 1770 1771 err_out: 1772 sky2_free_buffers(sky2); 1773 return err; 1774 } 1775 1776 /* Modular subtraction in ring */ 1777 static inline int tx_inuse(const struct sky2_port *sky2) 1778 { 1779 return (sky2->tx_prod - sky2->tx_cons) & (sky2->tx_ring_size - 1); 1780 } 1781 1782 /* Number of list elements available for next tx */ 1783 static inline int tx_avail(const struct sky2_port *sky2) 1784 { 1785 return sky2->tx_pending - tx_inuse(sky2); 1786 } 1787 1788 /* Estimate of number of transmit list elements required */ 1789 static unsigned tx_le_req(const struct sk_buff *skb) 1790 { 1791 unsigned count; 1792 1793 count = (skb_shinfo(skb)->nr_frags + 1) 1794 * (sizeof(dma_addr_t) / sizeof(u32)); 1795 1796 if (skb_is_gso(skb)) 1797 ++count; 1798 else if (sizeof(dma_addr_t) == sizeof(u32)) 1799 ++count; /* possible vlan */ 1800 1801 if (skb->ip_summed == CHECKSUM_PARTIAL) 1802 ++count; 1803 1804 return count; 1805 } 1806 1807 static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re) 1808 { 1809 if (re->flags & TX_MAP_SINGLE) 1810 dma_unmap_single(&pdev->dev, dma_unmap_addr(re, mapaddr), 1811 dma_unmap_len(re, maplen), DMA_TO_DEVICE); 1812 else if (re->flags & TX_MAP_PAGE) 1813 dma_unmap_page(&pdev->dev, dma_unmap_addr(re, mapaddr), 1814 dma_unmap_len(re, maplen), DMA_TO_DEVICE); 1815 re->flags = 0; 1816 } 1817 1818 /* 1819 * Put one packet in ring for transmit. 1820 * A single packet can generate multiple list elements, and 1821 * the number of ring elements will probably be less than the number 1822 * of list elements used. 1823 */ 1824 static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb, 1825 struct net_device *dev) 1826 { 1827 struct sky2_port *sky2 = netdev_priv(dev); 1828 struct sky2_hw *hw = sky2->hw; 1829 struct sky2_tx_le *le = NULL; 1830 struct tx_ring_info *re; 1831 unsigned i, len; 1832 dma_addr_t mapping; 1833 u32 upper; 1834 u16 slot; 1835 u16 mss; 1836 u8 ctrl; 1837 1838 if (unlikely(tx_avail(sky2) < tx_le_req(skb))) 1839 return NETDEV_TX_BUSY; 1840 1841 len = skb_headlen(skb); 1842 mapping = dma_map_single(&hw->pdev->dev, skb->data, len, 1843 DMA_TO_DEVICE); 1844 1845 if (dma_mapping_error(&hw->pdev->dev, mapping)) 1846 goto mapping_error; 1847 1848 slot = sky2->tx_prod; 1849 netif_printk(sky2, tx_queued, KERN_DEBUG, dev, 1850 "tx queued, slot %u, len %d\n", slot, skb->len); 1851 1852 /* Send high bits if needed */ 1853 upper = upper_32_bits(mapping); 1854 if (upper != sky2->tx_last_upper) { 1855 le = get_tx_le(sky2, &slot); 1856 le->addr = cpu_to_le32(upper); 1857 sky2->tx_last_upper = upper; 1858 le->opcode = OP_ADDR64 | HW_OWNER; 1859 } 1860 1861 /* Check for TCP Segmentation Offload */ 1862 mss = skb_shinfo(skb)->gso_size; 1863 if (mss != 0) { 1864 1865 if (!(hw->flags & SKY2_HW_NEW_LE)) 1866 mss += skb_tcp_all_headers(skb); 1867 1868 if (mss != sky2->tx_last_mss) { 1869 le = get_tx_le(sky2, &slot); 1870 le->addr = cpu_to_le32(mss); 1871 1872 if (hw->flags & SKY2_HW_NEW_LE) 1873 le->opcode = OP_MSS | HW_OWNER; 1874 else 1875 le->opcode = OP_LRGLEN | HW_OWNER; 1876 sky2->tx_last_mss = mss; 1877 } 1878 } 1879 1880 ctrl = 0; 1881 1882 /* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */ 1883 if (skb_vlan_tag_present(skb)) { 1884 if (!le) { 1885 le = get_tx_le(sky2, &slot); 1886 le->addr = 0; 1887 le->opcode = OP_VLAN|HW_OWNER; 1888 } else 1889 le->opcode |= OP_VLAN; 1890 le->length = cpu_to_be16(skb_vlan_tag_get(skb)); 1891 ctrl |= INS_VLAN; 1892 } 1893 1894 /* Handle TCP checksum offload */ 1895 if (skb->ip_summed == CHECKSUM_PARTIAL) { 1896 /* On Yukon EX (some versions) encoding change. */ 1897 if (hw->flags & SKY2_HW_AUTO_TX_SUM) 1898 ctrl |= CALSUM; /* auto checksum */ 1899 else { 1900 const unsigned offset = skb_transport_offset(skb); 1901 u32 tcpsum; 1902 1903 tcpsum = offset << 16; /* sum start */ 1904 tcpsum |= offset + skb->csum_offset; /* sum write */ 1905 1906 ctrl |= CALSUM | WR_SUM | INIT_SUM | LOCK_SUM; 1907 if (ip_hdr(skb)->protocol == IPPROTO_UDP) 1908 ctrl |= UDPTCP; 1909 1910 if (tcpsum != sky2->tx_tcpsum) { 1911 sky2->tx_tcpsum = tcpsum; 1912 1913 le = get_tx_le(sky2, &slot); 1914 le->addr = cpu_to_le32(tcpsum); 1915 le->length = 0; /* initial checksum value */ 1916 le->ctrl = 1; /* one packet */ 1917 le->opcode = OP_TCPLISW | HW_OWNER; 1918 } 1919 } 1920 } 1921 1922 re = sky2->tx_ring + slot; 1923 re->flags = TX_MAP_SINGLE; 1924 dma_unmap_addr_set(re, mapaddr, mapping); 1925 dma_unmap_len_set(re, maplen, len); 1926 1927 le = get_tx_le(sky2, &slot); 1928 le->addr = cpu_to_le32(lower_32_bits(mapping)); 1929 le->length = cpu_to_le16(len); 1930 le->ctrl = ctrl; 1931 le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER); 1932 1933 1934 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { 1935 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; 1936 1937 mapping = skb_frag_dma_map(&hw->pdev->dev, frag, 0, 1938 skb_frag_size(frag), DMA_TO_DEVICE); 1939 1940 if (dma_mapping_error(&hw->pdev->dev, mapping)) 1941 goto mapping_unwind; 1942 1943 upper = upper_32_bits(mapping); 1944 if (upper != sky2->tx_last_upper) { 1945 le = get_tx_le(sky2, &slot); 1946 le->addr = cpu_to_le32(upper); 1947 sky2->tx_last_upper = upper; 1948 le->opcode = OP_ADDR64 | HW_OWNER; 1949 } 1950 1951 re = sky2->tx_ring + slot; 1952 re->flags = TX_MAP_PAGE; 1953 dma_unmap_addr_set(re, mapaddr, mapping); 1954 dma_unmap_len_set(re, maplen, skb_frag_size(frag)); 1955 1956 le = get_tx_le(sky2, &slot); 1957 le->addr = cpu_to_le32(lower_32_bits(mapping)); 1958 le->length = cpu_to_le16(skb_frag_size(frag)); 1959 le->ctrl = ctrl; 1960 le->opcode = OP_BUFFER | HW_OWNER; 1961 } 1962 1963 re->skb = skb; 1964 le->ctrl |= EOP; 1965 1966 sky2->tx_prod = slot; 1967 1968 if (tx_avail(sky2) <= MAX_SKB_TX_LE) 1969 netif_stop_queue(dev); 1970 1971 netdev_sent_queue(dev, skb->len); 1972 sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod); 1973 1974 return NETDEV_TX_OK; 1975 1976 mapping_unwind: 1977 for (i = sky2->tx_prod; i != slot; i = RING_NEXT(i, sky2->tx_ring_size)) { 1978 re = sky2->tx_ring + i; 1979 1980 sky2_tx_unmap(hw->pdev, re); 1981 } 1982 1983 mapping_error: 1984 if (net_ratelimit()) 1985 dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name); 1986 dev_kfree_skb_any(skb); 1987 return NETDEV_TX_OK; 1988 } 1989 1990 /* 1991 * Free ring elements from starting at tx_cons until "done" 1992 * 1993 * NB: 1994 * 1. The hardware will tell us about partial completion of multi-part 1995 * buffers so make sure not to free skb to early. 1996 * 2. This may run in parallel start_xmit because the it only 1997 * looks at the tail of the queue of FIFO (tx_cons), not 1998 * the head (tx_prod) 1999 */ 2000 static void sky2_tx_complete(struct sky2_port *sky2, u16 done) 2001 { 2002 struct net_device *dev = sky2->netdev; 2003 u16 idx; 2004 unsigned int bytes_compl = 0, pkts_compl = 0; 2005 2006 BUG_ON(done >= sky2->tx_ring_size); 2007 2008 for (idx = sky2->tx_cons; idx != done; 2009 idx = RING_NEXT(idx, sky2->tx_ring_size)) { 2010 struct tx_ring_info *re = sky2->tx_ring + idx; 2011 struct sk_buff *skb = re->skb; 2012 2013 sky2_tx_unmap(sky2->hw->pdev, re); 2014 2015 if (skb) { 2016 netif_printk(sky2, tx_done, KERN_DEBUG, dev, 2017 "tx done %u\n", idx); 2018 2019 pkts_compl++; 2020 bytes_compl += skb->len; 2021 2022 re->skb = NULL; 2023 dev_kfree_skb_any(skb); 2024 2025 sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size); 2026 } 2027 } 2028 2029 sky2->tx_cons = idx; 2030 smp_mb(); 2031 2032 netdev_completed_queue(dev, pkts_compl, bytes_compl); 2033 2034 u64_stats_update_begin(&sky2->tx_stats.syncp); 2035 sky2->tx_stats.packets += pkts_compl; 2036 sky2->tx_stats.bytes += bytes_compl; 2037 u64_stats_update_end(&sky2->tx_stats.syncp); 2038 } 2039 2040 static void sky2_tx_reset(struct sky2_hw *hw, unsigned port) 2041 { 2042 /* Disable Force Sync bit and Enable Alloc bit */ 2043 sky2_write8(hw, SK_REG(port, TXA_CTRL), 2044 TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); 2045 2046 /* Stop Interval Timer and Limit Counter of Tx Arbiter */ 2047 sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L); 2048 sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L); 2049 2050 /* Reset the PCI FIFO of the async Tx queue */ 2051 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), 2052 BMU_RST_SET | BMU_FIFO_RST); 2053 2054 /* Reset the Tx prefetch units */ 2055 sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL), 2056 PREF_UNIT_RST_SET); 2057 2058 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET); 2059 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); 2060 2061 sky2_read32(hw, B0_CTST); 2062 } 2063 2064 static void sky2_hw_down(struct sky2_port *sky2) 2065 { 2066 struct sky2_hw *hw = sky2->hw; 2067 unsigned port = sky2->port; 2068 u16 ctrl; 2069 2070 /* Force flow control off */ 2071 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); 2072 2073 /* Stop transmitter */ 2074 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP); 2075 sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR)); 2076 2077 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), 2078 RB_RST_SET | RB_DIS_OP_MD); 2079 2080 ctrl = gma_read16(hw, port, GM_GP_CTRL); 2081 ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA); 2082 gma_write16(hw, port, GM_GP_CTRL, ctrl); 2083 2084 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); 2085 2086 /* Workaround shared GMAC reset */ 2087 if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 && 2088 port == 0 && hw->dev[1] && netif_running(hw->dev[1]))) 2089 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET); 2090 2091 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); 2092 2093 /* Force any delayed status interrupt and NAPI */ 2094 sky2_write32(hw, STAT_LEV_TIMER_CNT, 0); 2095 sky2_write32(hw, STAT_TX_TIMER_CNT, 0); 2096 sky2_write32(hw, STAT_ISR_TIMER_CNT, 0); 2097 sky2_read8(hw, STAT_ISR_TIMER_CTRL); 2098 2099 sky2_rx_stop(sky2); 2100 2101 spin_lock_bh(&sky2->phy_lock); 2102 sky2_phy_power_down(hw, port); 2103 spin_unlock_bh(&sky2->phy_lock); 2104 2105 sky2_tx_reset(hw, port); 2106 2107 /* Free any pending frames stuck in HW queue */ 2108 sky2_tx_complete(sky2, sky2->tx_prod); 2109 } 2110 2111 /* Network shutdown */ 2112 static int sky2_close(struct net_device *dev) 2113 { 2114 struct sky2_port *sky2 = netdev_priv(dev); 2115 struct sky2_hw *hw = sky2->hw; 2116 2117 /* Never really got started! */ 2118 if (!sky2->tx_le) 2119 return 0; 2120 2121 netif_info(sky2, ifdown, dev, "disabling interface\n"); 2122 2123 if (hw->ports == 1) { 2124 sky2_write32(hw, B0_IMSK, 0); 2125 sky2_read32(hw, B0_IMSK); 2126 2127 napi_disable(&hw->napi); 2128 free_irq(hw->pdev->irq, hw); 2129 hw->flags &= ~SKY2_HW_IRQ_SETUP; 2130 } else { 2131 u32 imask; 2132 2133 /* Disable port IRQ */ 2134 imask = sky2_read32(hw, B0_IMSK); 2135 imask &= ~portirq_msk[sky2->port]; 2136 sky2_write32(hw, B0_IMSK, imask); 2137 sky2_read32(hw, B0_IMSK); 2138 2139 synchronize_irq(hw->pdev->irq); 2140 napi_synchronize(&hw->napi); 2141 } 2142 2143 sky2_hw_down(sky2); 2144 2145 sky2_free_buffers(sky2); 2146 2147 return 0; 2148 } 2149 2150 static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux) 2151 { 2152 if (hw->flags & SKY2_HW_FIBRE_PHY) 2153 return SPEED_1000; 2154 2155 if (!(hw->flags & SKY2_HW_GIGABIT)) { 2156 if (aux & PHY_M_PS_SPEED_100) 2157 return SPEED_100; 2158 else 2159 return SPEED_10; 2160 } 2161 2162 switch (aux & PHY_M_PS_SPEED_MSK) { 2163 case PHY_M_PS_SPEED_1000: 2164 return SPEED_1000; 2165 case PHY_M_PS_SPEED_100: 2166 return SPEED_100; 2167 default: 2168 return SPEED_10; 2169 } 2170 } 2171 2172 static void sky2_link_up(struct sky2_port *sky2) 2173 { 2174 struct sky2_hw *hw = sky2->hw; 2175 unsigned port = sky2->port; 2176 static const char *fc_name[] = { 2177 [FC_NONE] = "none", 2178 [FC_TX] = "tx", 2179 [FC_RX] = "rx", 2180 [FC_BOTH] = "both", 2181 }; 2182 2183 sky2_set_ipg(sky2); 2184 2185 sky2_enable_rx_tx(sky2); 2186 2187 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); 2188 2189 netif_carrier_on(sky2->netdev); 2190 2191 mod_timer(&hw->watchdog_timer, jiffies + 1); 2192 2193 /* Turn on link LED */ 2194 sky2_write8(hw, SK_REG(port, LNK_LED_REG), 2195 LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF); 2196 2197 netif_info(sky2, link, sky2->netdev, 2198 "Link is up at %d Mbps, %s duplex, flow control %s\n", 2199 sky2->speed, 2200 sky2->duplex == DUPLEX_FULL ? "full" : "half", 2201 fc_name[sky2->flow_status]); 2202 } 2203 2204 static void sky2_link_down(struct sky2_port *sky2) 2205 { 2206 struct sky2_hw *hw = sky2->hw; 2207 unsigned port = sky2->port; 2208 u16 reg; 2209 2210 gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); 2211 2212 reg = gma_read16(hw, port, GM_GP_CTRL); 2213 reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA); 2214 gma_write16(hw, port, GM_GP_CTRL, reg); 2215 2216 netif_carrier_off(sky2->netdev); 2217 2218 /* Turn off link LED */ 2219 sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF); 2220 2221 netif_info(sky2, link, sky2->netdev, "Link is down\n"); 2222 2223 sky2_phy_init(hw, port); 2224 } 2225 2226 static enum flow_control sky2_flow(int rx, int tx) 2227 { 2228 if (rx) 2229 return tx ? FC_BOTH : FC_RX; 2230 else 2231 return tx ? FC_TX : FC_NONE; 2232 } 2233 2234 static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) 2235 { 2236 struct sky2_hw *hw = sky2->hw; 2237 unsigned port = sky2->port; 2238 u16 advert, lpa; 2239 2240 advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV); 2241 lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP); 2242 if (lpa & PHY_M_AN_RF) { 2243 netdev_err(sky2->netdev, "remote fault\n"); 2244 return -1; 2245 } 2246 2247 if (!(aux & PHY_M_PS_SPDUP_RES)) { 2248 netdev_err(sky2->netdev, "speed/duplex mismatch\n"); 2249 return -1; 2250 } 2251 2252 sky2->speed = sky2_phy_speed(hw, aux); 2253 sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; 2254 2255 /* Since the pause result bits seem to in different positions on 2256 * different chips. look at registers. 2257 */ 2258 if (hw->flags & SKY2_HW_FIBRE_PHY) { 2259 /* Shift for bits in fiber PHY */ 2260 advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM); 2261 lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM); 2262 2263 if (advert & ADVERTISE_1000XPAUSE) 2264 advert |= ADVERTISE_PAUSE_CAP; 2265 if (advert & ADVERTISE_1000XPSE_ASYM) 2266 advert |= ADVERTISE_PAUSE_ASYM; 2267 if (lpa & LPA_1000XPAUSE) 2268 lpa |= LPA_PAUSE_CAP; 2269 if (lpa & LPA_1000XPAUSE_ASYM) 2270 lpa |= LPA_PAUSE_ASYM; 2271 } 2272 2273 sky2->flow_status = FC_NONE; 2274 if (advert & ADVERTISE_PAUSE_CAP) { 2275 if (lpa & LPA_PAUSE_CAP) 2276 sky2->flow_status = FC_BOTH; 2277 else if (advert & ADVERTISE_PAUSE_ASYM) 2278 sky2->flow_status = FC_RX; 2279 } else if (advert & ADVERTISE_PAUSE_ASYM) { 2280 if ((lpa & LPA_PAUSE_CAP) && (lpa & LPA_PAUSE_ASYM)) 2281 sky2->flow_status = FC_TX; 2282 } 2283 2284 if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000 && 2285 !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX)) 2286 sky2->flow_status = FC_NONE; 2287 2288 if (sky2->flow_status & FC_TX) 2289 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); 2290 else 2291 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); 2292 2293 return 0; 2294 } 2295 2296 /* Interrupt from PHY */ 2297 static void sky2_phy_intr(struct sky2_hw *hw, unsigned port) 2298 { 2299 struct net_device *dev = hw->dev[port]; 2300 struct sky2_port *sky2 = netdev_priv(dev); 2301 u16 istatus, phystat; 2302 2303 if (!netif_running(dev)) 2304 return; 2305 2306 spin_lock(&sky2->phy_lock); 2307 istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT); 2308 phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT); 2309 2310 netif_info(sky2, intr, sky2->netdev, "phy interrupt status 0x%x 0x%x\n", 2311 istatus, phystat); 2312 2313 if (istatus & PHY_M_IS_AN_COMPL) { 2314 if (sky2_autoneg_done(sky2, phystat) == 0 && 2315 !netif_carrier_ok(dev)) 2316 sky2_link_up(sky2); 2317 goto out; 2318 } 2319 2320 if (istatus & PHY_M_IS_LSP_CHANGE) 2321 sky2->speed = sky2_phy_speed(hw, phystat); 2322 2323 if (istatus & PHY_M_IS_DUP_CHANGE) 2324 sky2->duplex = 2325 (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; 2326 2327 if (istatus & PHY_M_IS_LST_CHANGE) { 2328 if (phystat & PHY_M_PS_LINK_UP) 2329 sky2_link_up(sky2); 2330 else 2331 sky2_link_down(sky2); 2332 } 2333 out: 2334 spin_unlock(&sky2->phy_lock); 2335 } 2336 2337 /* Special quick link interrupt (Yukon-2 Optima only) */ 2338 static void sky2_qlink_intr(struct sky2_hw *hw) 2339 { 2340 struct sky2_port *sky2 = netdev_priv(hw->dev[0]); 2341 u32 imask; 2342 u16 phy; 2343 2344 /* disable irq */ 2345 imask = sky2_read32(hw, B0_IMSK); 2346 imask &= ~Y2_IS_PHY_QLNK; 2347 sky2_write32(hw, B0_IMSK, imask); 2348 2349 /* reset PHY Link Detect */ 2350 phy = sky2_pci_read16(hw, PSM_CONFIG_REG4); 2351 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); 2352 sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1); 2353 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); 2354 2355 sky2_link_up(sky2); 2356 } 2357 2358 /* Transmit timeout is only called if we are running, carrier is up 2359 * and tx queue is full (stopped). 2360 */ 2361 static void sky2_tx_timeout(struct net_device *dev, unsigned int txqueue) 2362 { 2363 struct sky2_port *sky2 = netdev_priv(dev); 2364 struct sky2_hw *hw = sky2->hw; 2365 2366 netif_err(sky2, timer, dev, "tx timeout\n"); 2367 2368 netdev_printk(KERN_DEBUG, dev, "transmit ring %u .. %u report=%u done=%u\n", 2369 sky2->tx_cons, sky2->tx_prod, 2370 sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX), 2371 sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE))); 2372 2373 /* can't restart safely under softirq */ 2374 schedule_work(&hw->restart_work); 2375 } 2376 2377 static int sky2_change_mtu(struct net_device *dev, int new_mtu) 2378 { 2379 struct sky2_port *sky2 = netdev_priv(dev); 2380 struct sky2_hw *hw = sky2->hw; 2381 unsigned port = sky2->port; 2382 int err; 2383 u16 ctl, mode; 2384 u32 imask; 2385 2386 if (!netif_running(dev)) { 2387 WRITE_ONCE(dev->mtu, new_mtu); 2388 netdev_update_features(dev); 2389 return 0; 2390 } 2391 2392 imask = sky2_read32(hw, B0_IMSK); 2393 sky2_write32(hw, B0_IMSK, 0); 2394 sky2_read32(hw, B0_IMSK); 2395 2396 netif_trans_update(dev); /* prevent tx timeout */ 2397 napi_disable(&hw->napi); 2398 netif_tx_disable(dev); 2399 2400 synchronize_irq(hw->pdev->irq); 2401 2402 if (!(hw->flags & SKY2_HW_RAM_BUFFER)) 2403 sky2_set_tx_stfwd(hw, port); 2404 2405 ctl = gma_read16(hw, port, GM_GP_CTRL); 2406 gma_write16(hw, port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA); 2407 sky2_rx_stop(sky2); 2408 sky2_rx_clean(sky2); 2409 2410 WRITE_ONCE(dev->mtu, new_mtu); 2411 netdev_update_features(dev); 2412 2413 mode = DATA_BLIND_VAL(DATA_BLIND_DEF) | GM_SMOD_VLAN_ENA; 2414 if (sky2->speed > SPEED_100) 2415 mode |= IPG_DATA_VAL(IPG_DATA_DEF_1000); 2416 else 2417 mode |= IPG_DATA_VAL(IPG_DATA_DEF_10_100); 2418 2419 if (dev->mtu > ETH_DATA_LEN) 2420 mode |= GM_SMOD_JUMBO_ENA; 2421 2422 gma_write16(hw, port, GM_SERIAL_MODE, mode); 2423 2424 sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD); 2425 2426 err = sky2_alloc_rx_skbs(sky2); 2427 if (!err) 2428 sky2_rx_start(sky2); 2429 else 2430 sky2_rx_clean(sky2); 2431 sky2_write32(hw, B0_IMSK, imask); 2432 2433 sky2_read32(hw, B0_Y2_SP_LISR); 2434 napi_enable(&hw->napi); 2435 2436 if (err) 2437 dev_close(dev); 2438 else { 2439 gma_write16(hw, port, GM_GP_CTRL, ctl); 2440 2441 netif_wake_queue(dev); 2442 } 2443 2444 return err; 2445 } 2446 2447 static inline bool needs_copy(const struct rx_ring_info *re, 2448 unsigned length) 2449 { 2450 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS 2451 /* Some architectures need the IP header to be aligned */ 2452 if (!IS_ALIGNED(re->data_addr + ETH_HLEN, sizeof(u32))) 2453 return true; 2454 #endif 2455 return length < copybreak; 2456 } 2457 2458 /* For small just reuse existing skb for next receive */ 2459 static struct sk_buff *receive_copy(struct sky2_port *sky2, 2460 const struct rx_ring_info *re, 2461 unsigned length) 2462 { 2463 struct sk_buff *skb; 2464 2465 skb = netdev_alloc_skb_ip_align(sky2->netdev, length); 2466 if (likely(skb)) { 2467 dma_sync_single_for_cpu(&sky2->hw->pdev->dev, re->data_addr, 2468 length, DMA_FROM_DEVICE); 2469 skb_copy_from_linear_data(re->skb, skb->data, length); 2470 skb->ip_summed = re->skb->ip_summed; 2471 skb->csum = re->skb->csum; 2472 skb_copy_hash(skb, re->skb); 2473 __vlan_hwaccel_copy_tag(skb, re->skb); 2474 2475 dma_sync_single_for_device(&sky2->hw->pdev->dev, 2476 re->data_addr, length, 2477 DMA_FROM_DEVICE); 2478 __vlan_hwaccel_clear_tag(re->skb); 2479 skb_clear_hash(re->skb); 2480 re->skb->ip_summed = CHECKSUM_NONE; 2481 skb_put(skb, length); 2482 } 2483 return skb; 2484 } 2485 2486 /* Adjust length of skb with fragments to match received data */ 2487 static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space, 2488 unsigned int length) 2489 { 2490 int i, num_frags; 2491 unsigned int size; 2492 2493 /* put header into skb */ 2494 size = min(length, hdr_space); 2495 skb->tail += size; 2496 skb->len += size; 2497 length -= size; 2498 2499 num_frags = skb_shinfo(skb)->nr_frags; 2500 for (i = 0; i < num_frags; i++) { 2501 skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; 2502 2503 if (length == 0) { 2504 /* don't need this page */ 2505 __skb_frag_unref(frag, false); 2506 --skb_shinfo(skb)->nr_frags; 2507 } else { 2508 size = min(length, (unsigned) PAGE_SIZE); 2509 2510 skb_frag_size_set(frag, size); 2511 skb->data_len += size; 2512 skb->truesize += PAGE_SIZE; 2513 skb->len += size; 2514 length -= size; 2515 } 2516 } 2517 } 2518 2519 /* Normal packet - take skb from ring element and put in a new one */ 2520 static struct sk_buff *receive_new(struct sky2_port *sky2, 2521 struct rx_ring_info *re, 2522 unsigned int length) 2523 { 2524 struct sk_buff *skb; 2525 struct rx_ring_info nre; 2526 unsigned hdr_space = sky2->rx_data_size; 2527 2528 nre.skb = sky2_rx_alloc(sky2, GFP_ATOMIC); 2529 if (unlikely(!nre.skb)) 2530 goto nobuf; 2531 2532 if (sky2_rx_map_skb(sky2->hw->pdev, &nre, hdr_space)) 2533 goto nomap; 2534 2535 skb = re->skb; 2536 sky2_rx_unmap_skb(sky2->hw->pdev, re); 2537 prefetch(skb->data); 2538 *re = nre; 2539 2540 if (skb_shinfo(skb)->nr_frags) 2541 skb_put_frags(skb, hdr_space, length); 2542 else 2543 skb_put(skb, length); 2544 return skb; 2545 2546 nomap: 2547 dev_kfree_skb(nre.skb); 2548 nobuf: 2549 return NULL; 2550 } 2551 2552 /* 2553 * Receive one packet. 2554 * For larger packets, get new buffer. 2555 */ 2556 static struct sk_buff *sky2_receive(struct net_device *dev, 2557 u16 length, u32 status) 2558 { 2559 struct sky2_port *sky2 = netdev_priv(dev); 2560 struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next; 2561 struct sk_buff *skb = NULL; 2562 u16 count = (status & GMR_FS_LEN) >> 16; 2563 2564 netif_printk(sky2, rx_status, KERN_DEBUG, dev, 2565 "rx slot %u status 0x%x len %d\n", 2566 sky2->rx_next, status, length); 2567 2568 sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; 2569 prefetch(sky2->rx_ring + sky2->rx_next); 2570 2571 if (skb_vlan_tag_present(re->skb)) 2572 count -= VLAN_HLEN; /* Account for vlan tag */ 2573 2574 /* This chip has hardware problems that generates bogus status. 2575 * So do only marginal checking and expect higher level protocols 2576 * to handle crap frames. 2577 */ 2578 if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P && 2579 sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 && 2580 length != count) 2581 goto okay; 2582 2583 if (status & GMR_FS_ANY_ERR) 2584 goto error; 2585 2586 if (!(status & GMR_FS_RX_OK)) 2587 goto resubmit; 2588 2589 /* if length reported by DMA does not match PHY, packet was truncated */ 2590 if (length != count) 2591 goto error; 2592 2593 okay: 2594 if (needs_copy(re, length)) 2595 skb = receive_copy(sky2, re, length); 2596 else 2597 skb = receive_new(sky2, re, length); 2598 2599 dev->stats.rx_dropped += (skb == NULL); 2600 2601 resubmit: 2602 sky2_rx_submit(sky2, re); 2603 2604 return skb; 2605 2606 error: 2607 ++dev->stats.rx_errors; 2608 2609 if (net_ratelimit()) 2610 netif_info(sky2, rx_err, dev, 2611 "rx error, status 0x%x length %d\n", status, length); 2612 2613 goto resubmit; 2614 } 2615 2616 /* Transmit complete */ 2617 static inline void sky2_tx_done(struct net_device *dev, u16 last) 2618 { 2619 struct sky2_port *sky2 = netdev_priv(dev); 2620 2621 if (netif_running(dev)) { 2622 sky2_tx_complete(sky2, last); 2623 2624 /* Wake unless it's detached, and called e.g. from sky2_close() */ 2625 if (tx_avail(sky2) > MAX_SKB_TX_LE + 4) 2626 netif_wake_queue(dev); 2627 } 2628 } 2629 2630 static inline void sky2_skb_rx(const struct sky2_port *sky2, 2631 struct sk_buff *skb) 2632 { 2633 if (skb->ip_summed == CHECKSUM_NONE) 2634 netif_receive_skb(skb); 2635 else 2636 napi_gro_receive(&sky2->hw->napi, skb); 2637 } 2638 2639 static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port, 2640 unsigned packets, unsigned bytes) 2641 { 2642 struct net_device *dev = hw->dev[port]; 2643 struct sky2_port *sky2 = netdev_priv(dev); 2644 2645 if (packets == 0) 2646 return; 2647 2648 u64_stats_update_begin(&sky2->rx_stats.syncp); 2649 sky2->rx_stats.packets += packets; 2650 sky2->rx_stats.bytes += bytes; 2651 u64_stats_update_end(&sky2->rx_stats.syncp); 2652 2653 sky2->last_rx = jiffies; 2654 sky2_rx_update(netdev_priv(dev), rxqaddr[port]); 2655 } 2656 2657 static void sky2_rx_checksum(struct sky2_port *sky2, u32 status) 2658 { 2659 /* If this happens then driver assuming wrong format for chip type */ 2660 BUG_ON(sky2->hw->flags & SKY2_HW_NEW_LE); 2661 2662 /* Both checksum counters are programmed to start at 2663 * the same offset, so unless there is a problem they 2664 * should match. This failure is an early indication that 2665 * hardware receive checksumming won't work. 2666 */ 2667 if (likely((u16)(status >> 16) == (u16)status)) { 2668 struct sk_buff *skb = sky2->rx_ring[sky2->rx_next].skb; 2669 skb->ip_summed = CHECKSUM_COMPLETE; 2670 skb->csum = le16_to_cpu(status); 2671 } else { 2672 dev_notice(&sky2->hw->pdev->dev, 2673 "%s: receive checksum problem (status = %#x)\n", 2674 sky2->netdev->name, status); 2675 2676 /* Disable checksum offload 2677 * It will be reenabled on next ndo_set_features, but if it's 2678 * really broken, will get disabled again 2679 */ 2680 sky2->netdev->features &= ~NETIF_F_RXCSUM; 2681 sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR), 2682 BMU_DIS_RX_CHKSUM); 2683 } 2684 } 2685 2686 static void sky2_rx_tag(struct sky2_port *sky2, u16 length) 2687 { 2688 struct sk_buff *skb; 2689 2690 skb = sky2->rx_ring[sky2->rx_next].skb; 2691 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), be16_to_cpu(length)); 2692 } 2693 2694 static void sky2_rx_hash(struct sky2_port *sky2, u32 status) 2695 { 2696 struct sk_buff *skb; 2697 2698 skb = sky2->rx_ring[sky2->rx_next].skb; 2699 skb_set_hash(skb, le32_to_cpu(status), PKT_HASH_TYPE_L3); 2700 } 2701 2702 /* Process status response ring */ 2703 static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) 2704 { 2705 int work_done = 0; 2706 unsigned int total_bytes[2] = { 0 }; 2707 unsigned int total_packets[2] = { 0 }; 2708 2709 if (to_do <= 0) 2710 return work_done; 2711 2712 rmb(); 2713 do { 2714 struct sky2_port *sky2; 2715 struct sky2_status_le *le = hw->st_le + hw->st_idx; 2716 unsigned port; 2717 struct net_device *dev; 2718 struct sk_buff *skb; 2719 u32 status; 2720 u16 length; 2721 u8 opcode = le->opcode; 2722 2723 if (!(opcode & HW_OWNER)) 2724 break; 2725 2726 hw->st_idx = RING_NEXT(hw->st_idx, hw->st_size); 2727 2728 port = le->css & CSS_LINK_BIT; 2729 dev = hw->dev[port]; 2730 sky2 = netdev_priv(dev); 2731 length = le16_to_cpu(le->length); 2732 status = le32_to_cpu(le->status); 2733 2734 le->opcode = 0; 2735 switch (opcode & ~HW_OWNER) { 2736 case OP_RXSTAT: 2737 total_packets[port]++; 2738 total_bytes[port] += length; 2739 2740 skb = sky2_receive(dev, length, status); 2741 if (!skb) 2742 break; 2743 2744 /* This chip reports checksum status differently */ 2745 if (hw->flags & SKY2_HW_NEW_LE) { 2746 if ((dev->features & NETIF_F_RXCSUM) && 2747 (le->css & (CSS_ISIPV4 | CSS_ISIPV6)) && 2748 (le->css & CSS_TCPUDPCSOK)) 2749 skb->ip_summed = CHECKSUM_UNNECESSARY; 2750 else 2751 skb->ip_summed = CHECKSUM_NONE; 2752 } 2753 2754 skb->protocol = eth_type_trans(skb, dev); 2755 sky2_skb_rx(sky2, skb); 2756 2757 /* Stop after net poll weight */ 2758 if (++work_done >= to_do) 2759 goto exit_loop; 2760 break; 2761 2762 case OP_RXVLAN: 2763 sky2_rx_tag(sky2, length); 2764 break; 2765 2766 case OP_RXCHKSVLAN: 2767 sky2_rx_tag(sky2, length); 2768 fallthrough; 2769 case OP_RXCHKS: 2770 if (likely(dev->features & NETIF_F_RXCSUM)) 2771 sky2_rx_checksum(sky2, status); 2772 break; 2773 2774 case OP_RSS_HASH: 2775 sky2_rx_hash(sky2, status); 2776 break; 2777 2778 case OP_TXINDEXLE: 2779 /* TX index reports status for both ports */ 2780 sky2_tx_done(hw->dev[0], status & 0xfff); 2781 if (hw->dev[1]) 2782 sky2_tx_done(hw->dev[1], 2783 ((status >> 24) & 0xff) 2784 | (u16)(length & 0xf) << 8); 2785 break; 2786 2787 default: 2788 if (net_ratelimit()) 2789 pr_warn("unknown status opcode 0x%x\n", opcode); 2790 } 2791 } while (hw->st_idx != idx); 2792 2793 /* Fully processed status ring so clear irq */ 2794 sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); 2795 2796 exit_loop: 2797 sky2_rx_done(hw, 0, total_packets[0], total_bytes[0]); 2798 sky2_rx_done(hw, 1, total_packets[1], total_bytes[1]); 2799 2800 return work_done; 2801 } 2802 2803 static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status) 2804 { 2805 struct net_device *dev = hw->dev[port]; 2806 2807 if (net_ratelimit()) 2808 netdev_info(dev, "hw error interrupt status 0x%x\n", status); 2809 2810 if (status & Y2_IS_PAR_RD1) { 2811 if (net_ratelimit()) 2812 netdev_err(dev, "ram data read parity error\n"); 2813 /* Clear IRQ */ 2814 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR); 2815 } 2816 2817 if (status & Y2_IS_PAR_WR1) { 2818 if (net_ratelimit()) 2819 netdev_err(dev, "ram data write parity error\n"); 2820 2821 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR); 2822 } 2823 2824 if (status & Y2_IS_PAR_MAC1) { 2825 if (net_ratelimit()) 2826 netdev_err(dev, "MAC parity error\n"); 2827 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE); 2828 } 2829 2830 if (status & Y2_IS_PAR_RX1) { 2831 if (net_ratelimit()) 2832 netdev_err(dev, "RX parity error\n"); 2833 sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR); 2834 } 2835 2836 if (status & Y2_IS_TCP_TXA1) { 2837 if (net_ratelimit()) 2838 netdev_err(dev, "TCP segmentation error\n"); 2839 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP); 2840 } 2841 } 2842 2843 static void sky2_hw_intr(struct sky2_hw *hw) 2844 { 2845 struct pci_dev *pdev = hw->pdev; 2846 u32 status = sky2_read32(hw, B0_HWE_ISRC); 2847 u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK); 2848 2849 status &= hwmsk; 2850 2851 if (status & Y2_IS_TIST_OV) 2852 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); 2853 2854 if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) { 2855 u16 pci_err; 2856 2857 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); 2858 pci_err = sky2_pci_read16(hw, PCI_STATUS); 2859 if (net_ratelimit()) 2860 dev_err(&pdev->dev, "PCI hardware error (0x%x)\n", 2861 pci_err); 2862 2863 sky2_pci_write16(hw, PCI_STATUS, 2864 pci_err | PCI_STATUS_ERROR_BITS); 2865 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); 2866 } 2867 2868 if (status & Y2_IS_PCI_EXP) { 2869 /* PCI-Express uncorrectable Error occurred */ 2870 u32 err; 2871 2872 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); 2873 err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS); 2874 sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS, 2875 0xfffffffful); 2876 if (net_ratelimit()) 2877 dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err); 2878 2879 sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS); 2880 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); 2881 } 2882 2883 if (status & Y2_HWE_L1_MASK) 2884 sky2_hw_error(hw, 0, status); 2885 status >>= 8; 2886 if (status & Y2_HWE_L1_MASK) 2887 sky2_hw_error(hw, 1, status); 2888 } 2889 2890 static void sky2_mac_intr(struct sky2_hw *hw, unsigned port) 2891 { 2892 struct net_device *dev = hw->dev[port]; 2893 struct sky2_port *sky2 = netdev_priv(dev); 2894 u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC)); 2895 2896 netif_info(sky2, intr, dev, "mac interrupt status 0x%x\n", status); 2897 2898 if (status & GM_IS_RX_CO_OV) 2899 gma_read16(hw, port, GM_RX_IRQ_SRC); 2900 2901 if (status & GM_IS_TX_CO_OV) 2902 gma_read16(hw, port, GM_TX_IRQ_SRC); 2903 2904 if (status & GM_IS_RX_FF_OR) { 2905 ++dev->stats.rx_fifo_errors; 2906 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO); 2907 } 2908 2909 if (status & GM_IS_TX_FF_UR) { 2910 ++dev->stats.tx_fifo_errors; 2911 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU); 2912 } 2913 } 2914 2915 /* This should never happen it is a bug. */ 2916 static void sky2_le_error(struct sky2_hw *hw, unsigned port, u16 q) 2917 { 2918 struct net_device *dev = hw->dev[port]; 2919 u16 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX)); 2920 2921 dev_err(&hw->pdev->dev, "%s: descriptor error q=%#x get=%u put=%u\n", 2922 dev->name, (unsigned) q, (unsigned) idx, 2923 (unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX))); 2924 2925 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK); 2926 } 2927 2928 static int sky2_rx_hung(struct net_device *dev) 2929 { 2930 struct sky2_port *sky2 = netdev_priv(dev); 2931 struct sky2_hw *hw = sky2->hw; 2932 unsigned port = sky2->port; 2933 unsigned rxq = rxqaddr[port]; 2934 u32 mac_rp = sky2_read32(hw, SK_REG(port, RX_GMF_RP)); 2935 u8 mac_lev = sky2_read8(hw, SK_REG(port, RX_GMF_RLEV)); 2936 u8 fifo_rp = sky2_read8(hw, Q_ADDR(rxq, Q_RP)); 2937 u8 fifo_lev = sky2_read8(hw, Q_ADDR(rxq, Q_RL)); 2938 2939 /* If idle and MAC or PCI is stuck */ 2940 if (sky2->check.last == sky2->last_rx && 2941 ((mac_rp == sky2->check.mac_rp && 2942 mac_lev != 0 && mac_lev >= sky2->check.mac_lev) || 2943 /* Check if the PCI RX hang */ 2944 (fifo_rp == sky2->check.fifo_rp && 2945 fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) { 2946 netdev_printk(KERN_DEBUG, dev, 2947 "hung mac %d:%d fifo %d (%d:%d)\n", 2948 mac_lev, mac_rp, fifo_lev, 2949 fifo_rp, sky2_read8(hw, Q_ADDR(rxq, Q_WP))); 2950 return 1; 2951 } else { 2952 sky2->check.last = sky2->last_rx; 2953 sky2->check.mac_rp = mac_rp; 2954 sky2->check.mac_lev = mac_lev; 2955 sky2->check.fifo_rp = fifo_rp; 2956 sky2->check.fifo_lev = fifo_lev; 2957 return 0; 2958 } 2959 } 2960 2961 static void sky2_watchdog(struct timer_list *t) 2962 { 2963 struct sky2_hw *hw = from_timer(hw, t, watchdog_timer); 2964 2965 /* Check for lost IRQ once a second */ 2966 if (sky2_read32(hw, B0_ISRC)) { 2967 napi_schedule(&hw->napi); 2968 } else { 2969 int i, active = 0; 2970 2971 for (i = 0; i < hw->ports; i++) { 2972 struct net_device *dev = hw->dev[i]; 2973 if (!netif_running(dev)) 2974 continue; 2975 ++active; 2976 2977 /* For chips with Rx FIFO, check if stuck */ 2978 if ((hw->flags & SKY2_HW_RAM_BUFFER) && 2979 sky2_rx_hung(dev)) { 2980 netdev_info(dev, "receiver hang detected\n"); 2981 schedule_work(&hw->restart_work); 2982 return; 2983 } 2984 } 2985 2986 if (active == 0) 2987 return; 2988 } 2989 2990 mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ)); 2991 } 2992 2993 /* Hardware/software error handling */ 2994 static void sky2_err_intr(struct sky2_hw *hw, u32 status) 2995 { 2996 if (net_ratelimit()) 2997 dev_warn(&hw->pdev->dev, "error interrupt status=%#x\n", status); 2998 2999 if (status & Y2_IS_HW_ERR) 3000 sky2_hw_intr(hw); 3001 3002 if (status & Y2_IS_IRQ_MAC1) 3003 sky2_mac_intr(hw, 0); 3004 3005 if (status & Y2_IS_IRQ_MAC2) 3006 sky2_mac_intr(hw, 1); 3007 3008 if (status & Y2_IS_CHK_RX1) 3009 sky2_le_error(hw, 0, Q_R1); 3010 3011 if (status & Y2_IS_CHK_RX2) 3012 sky2_le_error(hw, 1, Q_R2); 3013 3014 if (status & Y2_IS_CHK_TXA1) 3015 sky2_le_error(hw, 0, Q_XA1); 3016 3017 if (status & Y2_IS_CHK_TXA2) 3018 sky2_le_error(hw, 1, Q_XA2); 3019 } 3020 3021 static int sky2_poll(struct napi_struct *napi, int work_limit) 3022 { 3023 struct sky2_hw *hw = container_of(napi, struct sky2_hw, napi); 3024 u32 status = sky2_read32(hw, B0_Y2_SP_EISR); 3025 int work_done = 0; 3026 u16 idx; 3027 3028 if (unlikely(status & Y2_IS_ERROR)) 3029 sky2_err_intr(hw, status); 3030 3031 if (status & Y2_IS_IRQ_PHY1) 3032 sky2_phy_intr(hw, 0); 3033 3034 if (status & Y2_IS_IRQ_PHY2) 3035 sky2_phy_intr(hw, 1); 3036 3037 if (status & Y2_IS_PHY_QLNK) 3038 sky2_qlink_intr(hw); 3039 3040 while ((idx = sky2_read16(hw, STAT_PUT_IDX)) != hw->st_idx) { 3041 work_done += sky2_status_intr(hw, work_limit - work_done, idx); 3042 3043 if (work_done >= work_limit) 3044 goto done; 3045 } 3046 3047 napi_complete_done(napi, work_done); 3048 sky2_read32(hw, B0_Y2_SP_LISR); 3049 done: 3050 3051 return work_done; 3052 } 3053 3054 static irqreturn_t sky2_intr(int irq, void *dev_id) 3055 { 3056 struct sky2_hw *hw = dev_id; 3057 u32 status; 3058 3059 /* Reading this mask interrupts as side effect */ 3060 status = sky2_read32(hw, B0_Y2_SP_ISRC2); 3061 if (status == 0 || status == ~0) { 3062 sky2_write32(hw, B0_Y2_SP_ICR, 2); 3063 return IRQ_NONE; 3064 } 3065 3066 prefetch(&hw->st_le[hw->st_idx]); 3067 3068 napi_schedule(&hw->napi); 3069 3070 return IRQ_HANDLED; 3071 } 3072 3073 #ifdef CONFIG_NET_POLL_CONTROLLER 3074 static void sky2_netpoll(struct net_device *dev) 3075 { 3076 struct sky2_port *sky2 = netdev_priv(dev); 3077 3078 napi_schedule(&sky2->hw->napi); 3079 } 3080 #endif 3081 3082 /* Chip internal frequency for clock calculations */ 3083 static u32 sky2_mhz(const struct sky2_hw *hw) 3084 { 3085 switch (hw->chip_id) { 3086 case CHIP_ID_YUKON_EC: 3087 case CHIP_ID_YUKON_EC_U: 3088 case CHIP_ID_YUKON_EX: 3089 case CHIP_ID_YUKON_SUPR: 3090 case CHIP_ID_YUKON_UL_2: 3091 case CHIP_ID_YUKON_OPT: 3092 case CHIP_ID_YUKON_PRM: 3093 case CHIP_ID_YUKON_OP_2: 3094 return 125; 3095 3096 case CHIP_ID_YUKON_FE: 3097 return 100; 3098 3099 case CHIP_ID_YUKON_FE_P: 3100 return 50; 3101 3102 case CHIP_ID_YUKON_XL: 3103 return 156; 3104 3105 default: 3106 BUG(); 3107 } 3108 } 3109 3110 static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us) 3111 { 3112 return sky2_mhz(hw) * us; 3113 } 3114 3115 static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk) 3116 { 3117 return clk / sky2_mhz(hw); 3118 } 3119 3120 3121 static int sky2_init(struct sky2_hw *hw) 3122 { 3123 u8 t8; 3124 3125 /* Enable all clocks and check for bad PCI access */ 3126 sky2_pci_write32(hw, PCI_DEV_REG3, 0); 3127 3128 sky2_write8(hw, B0_CTST, CS_RST_CLR); 3129 3130 hw->chip_id = sky2_read8(hw, B2_CHIP_ID); 3131 hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4; 3132 3133 switch (hw->chip_id) { 3134 case CHIP_ID_YUKON_XL: 3135 hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY; 3136 if (hw->chip_rev < CHIP_REV_YU_XL_A2) 3137 hw->flags |= SKY2_HW_RSS_BROKEN; 3138 break; 3139 3140 case CHIP_ID_YUKON_EC_U: 3141 hw->flags = SKY2_HW_GIGABIT 3142 | SKY2_HW_NEWER_PHY 3143 | SKY2_HW_ADV_POWER_CTL; 3144 break; 3145 3146 case CHIP_ID_YUKON_EX: 3147 hw->flags = SKY2_HW_GIGABIT 3148 | SKY2_HW_NEWER_PHY 3149 | SKY2_HW_NEW_LE 3150 | SKY2_HW_ADV_POWER_CTL 3151 | SKY2_HW_RSS_CHKSUM; 3152 3153 /* New transmit checksum */ 3154 if (hw->chip_rev != CHIP_REV_YU_EX_B0) 3155 hw->flags |= SKY2_HW_AUTO_TX_SUM; 3156 break; 3157 3158 case CHIP_ID_YUKON_EC: 3159 /* This rev is really old, and requires untested workarounds */ 3160 if (hw->chip_rev == CHIP_REV_YU_EC_A1) { 3161 dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n"); 3162 return -EOPNOTSUPP; 3163 } 3164 hw->flags = SKY2_HW_GIGABIT | SKY2_HW_RSS_BROKEN; 3165 break; 3166 3167 case CHIP_ID_YUKON_FE: 3168 hw->flags = SKY2_HW_RSS_BROKEN; 3169 break; 3170 3171 case CHIP_ID_YUKON_FE_P: 3172 hw->flags = SKY2_HW_NEWER_PHY 3173 | SKY2_HW_NEW_LE 3174 | SKY2_HW_AUTO_TX_SUM 3175 | SKY2_HW_ADV_POWER_CTL; 3176 3177 /* The workaround for status conflicts VLAN tag detection. */ 3178 if (hw->chip_rev == CHIP_REV_YU_FE2_A0) 3179 hw->flags |= SKY2_HW_VLAN_BROKEN | SKY2_HW_RSS_CHKSUM; 3180 break; 3181 3182 case CHIP_ID_YUKON_SUPR: 3183 hw->flags = SKY2_HW_GIGABIT 3184 | SKY2_HW_NEWER_PHY 3185 | SKY2_HW_NEW_LE 3186 | SKY2_HW_AUTO_TX_SUM 3187 | SKY2_HW_ADV_POWER_CTL; 3188 3189 if (hw->chip_rev == CHIP_REV_YU_SU_A0) 3190 hw->flags |= SKY2_HW_RSS_CHKSUM; 3191 break; 3192 3193 case CHIP_ID_YUKON_UL_2: 3194 hw->flags = SKY2_HW_GIGABIT 3195 | SKY2_HW_ADV_POWER_CTL; 3196 break; 3197 3198 case CHIP_ID_YUKON_OPT: 3199 case CHIP_ID_YUKON_PRM: 3200 case CHIP_ID_YUKON_OP_2: 3201 hw->flags = SKY2_HW_GIGABIT 3202 | SKY2_HW_NEW_LE 3203 | SKY2_HW_ADV_POWER_CTL; 3204 break; 3205 3206 default: 3207 dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n", 3208 hw->chip_id); 3209 return -EOPNOTSUPP; 3210 } 3211 3212 hw->pmd_type = sky2_read8(hw, B2_PMD_TYP); 3213 if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P') 3214 hw->flags |= SKY2_HW_FIBRE_PHY; 3215 3216 hw->ports = 1; 3217 t8 = sky2_read8(hw, B2_Y2_HW_RES); 3218 if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) { 3219 if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC)) 3220 ++hw->ports; 3221 } 3222 3223 if (sky2_read8(hw, B2_E_0)) 3224 hw->flags |= SKY2_HW_RAM_BUFFER; 3225 3226 return 0; 3227 } 3228 3229 static void sky2_reset(struct sky2_hw *hw) 3230 { 3231 struct pci_dev *pdev = hw->pdev; 3232 u16 status; 3233 int i; 3234 u32 hwe_mask = Y2_HWE_ALL_MASK; 3235 3236 /* disable ASF */ 3237 if (hw->chip_id == CHIP_ID_YUKON_EX 3238 || hw->chip_id == CHIP_ID_YUKON_SUPR) { 3239 sky2_write32(hw, CPU_WDOG, 0); 3240 status = sky2_read16(hw, HCU_CCSR); 3241 status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE | 3242 HCU_CCSR_UC_STATE_MSK); 3243 /* 3244 * CPU clock divider shouldn't be used because 3245 * - ASF firmware may malfunction 3246 * - Yukon-Supreme: Parallel FLASH doesn't support divided clocks 3247 */ 3248 status &= ~HCU_CCSR_CPU_CLK_DIVIDE_MSK; 3249 sky2_write16(hw, HCU_CCSR, status); 3250 sky2_write32(hw, CPU_WDOG, 0); 3251 } else 3252 sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET); 3253 sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE); 3254 3255 /* do a SW reset */ 3256 sky2_write8(hw, B0_CTST, CS_RST_SET); 3257 sky2_write8(hw, B0_CTST, CS_RST_CLR); 3258 3259 /* allow writes to PCI config */ 3260 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); 3261 3262 /* clear PCI errors, if any */ 3263 status = sky2_pci_read16(hw, PCI_STATUS); 3264 status |= PCI_STATUS_ERROR_BITS; 3265 sky2_pci_write16(hw, PCI_STATUS, status); 3266 3267 sky2_write8(hw, B0_CTST, CS_MRST_CLR); 3268 3269 if (pci_is_pcie(pdev)) { 3270 sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS, 3271 0xfffffffful); 3272 3273 /* If error bit is stuck on ignore it */ 3274 if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP) 3275 dev_info(&pdev->dev, "ignoring stuck error report bit\n"); 3276 else 3277 hwe_mask |= Y2_IS_PCI_EXP; 3278 } 3279 3280 sky2_power_on(hw); 3281 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); 3282 3283 for (i = 0; i < hw->ports; i++) { 3284 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); 3285 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR); 3286 3287 if (hw->chip_id == CHIP_ID_YUKON_EX || 3288 hw->chip_id == CHIP_ID_YUKON_SUPR) 3289 sky2_write16(hw, SK_REG(i, GMAC_CTRL), 3290 GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON 3291 | GMC_BYP_RETR_ON); 3292 3293 } 3294 3295 if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev > CHIP_REV_YU_SU_B0) { 3296 /* enable MACSec clock gating */ 3297 sky2_pci_write32(hw, PCI_DEV_REG3, P_CLK_MACSEC_DIS); 3298 } 3299 3300 if (hw->chip_id == CHIP_ID_YUKON_OPT || 3301 hw->chip_id == CHIP_ID_YUKON_PRM || 3302 hw->chip_id == CHIP_ID_YUKON_OP_2) { 3303 u16 reg; 3304 3305 if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) { 3306 /* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */ 3307 sky2_write32(hw, Y2_PEX_PHY_DATA, (0x80UL << 16) | (1 << 7)); 3308 3309 /* set PHY Link Detect Timer to 1.1 second (11x 100ms) */ 3310 reg = 10; 3311 3312 /* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */ 3313 sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16)); 3314 } else { 3315 /* set PHY Link Detect Timer to 0.4 second (4x 100ms) */ 3316 reg = 3; 3317 } 3318 3319 reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE; 3320 reg |= PSM_CONFIG_REG4_RST_PHY_LINK_DETECT; 3321 3322 /* reset PHY Link Detect */ 3323 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); 3324 sky2_pci_write16(hw, PSM_CONFIG_REG4, reg); 3325 3326 /* check if PSMv2 was running before */ 3327 reg = sky2_pci_read16(hw, PSM_CONFIG_REG3); 3328 if (reg & PCI_EXP_LNKCTL_ASPMC) 3329 /* restore the PCIe Link Control register */ 3330 sky2_pci_write16(hw, pdev->pcie_cap + PCI_EXP_LNKCTL, 3331 reg); 3332 3333 if (hw->chip_id == CHIP_ID_YUKON_PRM && 3334 hw->chip_rev == CHIP_REV_YU_PRM_A0) { 3335 /* change PHY Interrupt polarity to low active */ 3336 reg = sky2_read16(hw, GPHY_CTRL); 3337 sky2_write16(hw, GPHY_CTRL, reg | GPC_INTPOL); 3338 3339 /* adapt HW for low active PHY Interrupt */ 3340 reg = sky2_read16(hw, Y2_CFG_SPC + PCI_LDO_CTRL); 3341 sky2_write16(hw, Y2_CFG_SPC + PCI_LDO_CTRL, reg | PHY_M_UNDOC1); 3342 } 3343 3344 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); 3345 3346 /* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */ 3347 sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16)); 3348 } 3349 3350 /* Clear I2C IRQ noise */ 3351 sky2_write32(hw, B2_I2C_IRQ, 1); 3352 3353 /* turn off hardware timer (unused) */ 3354 sky2_write8(hw, B2_TI_CTRL, TIM_STOP); 3355 sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ); 3356 3357 /* Turn off descriptor polling */ 3358 sky2_write32(hw, B28_DPT_CTRL, DPT_STOP); 3359 3360 /* Turn off receive timestamp */ 3361 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP); 3362 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); 3363 3364 /* enable the Tx Arbiters */ 3365 for (i = 0; i < hw->ports; i++) 3366 sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB); 3367 3368 /* Initialize ram interface */ 3369 for (i = 0; i < hw->ports; i++) { 3370 sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR); 3371 3372 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53); 3373 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53); 3374 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53); 3375 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53); 3376 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53); 3377 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53); 3378 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53); 3379 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53); 3380 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53); 3381 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53); 3382 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53); 3383 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53); 3384 } 3385 3386 sky2_write32(hw, B0_HWE_IMSK, hwe_mask); 3387 3388 for (i = 0; i < hw->ports; i++) 3389 sky2_gmac_reset(hw, i); 3390 3391 memset(hw->st_le, 0, hw->st_size * sizeof(struct sky2_status_le)); 3392 hw->st_idx = 0; 3393 3394 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET); 3395 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR); 3396 3397 sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma); 3398 sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32); 3399 3400 /* Set the list last index */ 3401 sky2_write16(hw, STAT_LAST_IDX, hw->st_size - 1); 3402 3403 sky2_write16(hw, STAT_TX_IDX_TH, 10); 3404 sky2_write8(hw, STAT_FIFO_WM, 16); 3405 3406 /* set Status-FIFO ISR watermark */ 3407 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0) 3408 sky2_write8(hw, STAT_FIFO_ISR_WM, 4); 3409 else 3410 sky2_write8(hw, STAT_FIFO_ISR_WM, 16); 3411 3412 sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000)); 3413 sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20)); 3414 sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100)); 3415 3416 /* enable status unit */ 3417 sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON); 3418 3419 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); 3420 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START); 3421 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START); 3422 } 3423 3424 /* Take device down (offline). 3425 * Equivalent to doing dev_stop() but this does not 3426 * inform upper layers of the transition. 3427 */ 3428 static void sky2_detach(struct net_device *dev) 3429 { 3430 if (netif_running(dev)) { 3431 netif_tx_lock(dev); 3432 netif_device_detach(dev); /* stop txq */ 3433 netif_tx_unlock(dev); 3434 sky2_close(dev); 3435 } 3436 } 3437 3438 /* Bring device back after doing sky2_detach */ 3439 static int sky2_reattach(struct net_device *dev) 3440 { 3441 int err = 0; 3442 3443 if (netif_running(dev)) { 3444 err = sky2_open(dev); 3445 if (err) { 3446 netdev_info(dev, "could not restart %d\n", err); 3447 dev_close(dev); 3448 } else { 3449 netif_device_attach(dev); 3450 sky2_set_multicast(dev); 3451 } 3452 } 3453 3454 return err; 3455 } 3456 3457 static void sky2_all_down(struct sky2_hw *hw) 3458 { 3459 int i; 3460 3461 if (hw->flags & SKY2_HW_IRQ_SETUP) { 3462 sky2_write32(hw, B0_IMSK, 0); 3463 sky2_read32(hw, B0_IMSK); 3464 3465 synchronize_irq(hw->pdev->irq); 3466 napi_disable(&hw->napi); 3467 } 3468 3469 for (i = 0; i < hw->ports; i++) { 3470 struct net_device *dev = hw->dev[i]; 3471 struct sky2_port *sky2 = netdev_priv(dev); 3472 3473 if (!netif_running(dev)) 3474 continue; 3475 3476 netif_carrier_off(dev); 3477 netif_tx_disable(dev); 3478 sky2_hw_down(sky2); 3479 } 3480 } 3481 3482 static void sky2_all_up(struct sky2_hw *hw) 3483 { 3484 u32 imask = Y2_IS_BASE; 3485 int i; 3486 3487 for (i = 0; i < hw->ports; i++) { 3488 struct net_device *dev = hw->dev[i]; 3489 struct sky2_port *sky2 = netdev_priv(dev); 3490 3491 if (!netif_running(dev)) 3492 continue; 3493 3494 sky2_hw_up(sky2); 3495 sky2_set_multicast(dev); 3496 imask |= portirq_msk[i]; 3497 netif_wake_queue(dev); 3498 } 3499 3500 if (hw->flags & SKY2_HW_IRQ_SETUP) { 3501 sky2_write32(hw, B0_IMSK, imask); 3502 sky2_read32(hw, B0_IMSK); 3503 sky2_read32(hw, B0_Y2_SP_LISR); 3504 napi_enable(&hw->napi); 3505 } 3506 } 3507 3508 static void sky2_restart(struct work_struct *work) 3509 { 3510 struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work); 3511 3512 rtnl_lock(); 3513 3514 sky2_all_down(hw); 3515 sky2_reset(hw); 3516 sky2_all_up(hw); 3517 3518 rtnl_unlock(); 3519 } 3520 3521 static inline u8 sky2_wol_supported(const struct sky2_hw *hw) 3522 { 3523 return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0; 3524 } 3525 3526 static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) 3527 { 3528 const struct sky2_port *sky2 = netdev_priv(dev); 3529 3530 wol->supported = sky2_wol_supported(sky2->hw); 3531 wol->wolopts = sky2->wol; 3532 } 3533 3534 static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) 3535 { 3536 struct sky2_port *sky2 = netdev_priv(dev); 3537 struct sky2_hw *hw = sky2->hw; 3538 bool enable_wakeup = false; 3539 int i; 3540 3541 if ((wol->wolopts & ~sky2_wol_supported(sky2->hw)) || 3542 !device_can_wakeup(&hw->pdev->dev)) 3543 return -EOPNOTSUPP; 3544 3545 sky2->wol = wol->wolopts; 3546 3547 for (i = 0; i < hw->ports; i++) { 3548 struct net_device *dev = hw->dev[i]; 3549 struct sky2_port *sky2 = netdev_priv(dev); 3550 3551 if (sky2->wol) 3552 enable_wakeup = true; 3553 } 3554 device_set_wakeup_enable(&hw->pdev->dev, enable_wakeup); 3555 3556 return 0; 3557 } 3558 3559 static u32 sky2_supported_modes(const struct sky2_hw *hw) 3560 { 3561 if (sky2_is_copper(hw)) { 3562 u32 modes = SUPPORTED_10baseT_Half 3563 | SUPPORTED_10baseT_Full 3564 | SUPPORTED_100baseT_Half 3565 | SUPPORTED_100baseT_Full; 3566 3567 if (hw->flags & SKY2_HW_GIGABIT) 3568 modes |= SUPPORTED_1000baseT_Half 3569 | SUPPORTED_1000baseT_Full; 3570 return modes; 3571 } else 3572 return SUPPORTED_1000baseT_Half 3573 | SUPPORTED_1000baseT_Full; 3574 } 3575 3576 static int sky2_get_link_ksettings(struct net_device *dev, 3577 struct ethtool_link_ksettings *cmd) 3578 { 3579 struct sky2_port *sky2 = netdev_priv(dev); 3580 struct sky2_hw *hw = sky2->hw; 3581 u32 supported, advertising; 3582 3583 supported = sky2_supported_modes(hw); 3584 cmd->base.phy_address = PHY_ADDR_MARV; 3585 if (sky2_is_copper(hw)) { 3586 cmd->base.port = PORT_TP; 3587 cmd->base.speed = sky2->speed; 3588 supported |= SUPPORTED_Autoneg | SUPPORTED_TP; 3589 } else { 3590 cmd->base.speed = SPEED_1000; 3591 cmd->base.port = PORT_FIBRE; 3592 supported |= SUPPORTED_Autoneg | SUPPORTED_FIBRE; 3593 } 3594 3595 advertising = sky2->advertising; 3596 cmd->base.autoneg = (sky2->flags & SKY2_FLAG_AUTO_SPEED) 3597 ? AUTONEG_ENABLE : AUTONEG_DISABLE; 3598 cmd->base.duplex = sky2->duplex; 3599 3600 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported, 3601 supported); 3602 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising, 3603 advertising); 3604 3605 return 0; 3606 } 3607 3608 static int sky2_set_link_ksettings(struct net_device *dev, 3609 const struct ethtool_link_ksettings *cmd) 3610 { 3611 struct sky2_port *sky2 = netdev_priv(dev); 3612 const struct sky2_hw *hw = sky2->hw; 3613 u32 supported = sky2_supported_modes(hw); 3614 u32 new_advertising; 3615 3616 ethtool_convert_link_mode_to_legacy_u32(&new_advertising, 3617 cmd->link_modes.advertising); 3618 3619 if (cmd->base.autoneg == AUTONEG_ENABLE) { 3620 if (new_advertising & ~supported) 3621 return -EINVAL; 3622 3623 if (sky2_is_copper(hw)) 3624 sky2->advertising = new_advertising | 3625 ADVERTISED_TP | 3626 ADVERTISED_Autoneg; 3627 else 3628 sky2->advertising = new_advertising | 3629 ADVERTISED_FIBRE | 3630 ADVERTISED_Autoneg; 3631 3632 sky2->flags |= SKY2_FLAG_AUTO_SPEED; 3633 sky2->duplex = -1; 3634 sky2->speed = -1; 3635 } else { 3636 u32 setting; 3637 u32 speed = cmd->base.speed; 3638 3639 switch (speed) { 3640 case SPEED_1000: 3641 if (cmd->base.duplex == DUPLEX_FULL) 3642 setting = SUPPORTED_1000baseT_Full; 3643 else if (cmd->base.duplex == DUPLEX_HALF) 3644 setting = SUPPORTED_1000baseT_Half; 3645 else 3646 return -EINVAL; 3647 break; 3648 case SPEED_100: 3649 if (cmd->base.duplex == DUPLEX_FULL) 3650 setting = SUPPORTED_100baseT_Full; 3651 else if (cmd->base.duplex == DUPLEX_HALF) 3652 setting = SUPPORTED_100baseT_Half; 3653 else 3654 return -EINVAL; 3655 break; 3656 3657 case SPEED_10: 3658 if (cmd->base.duplex == DUPLEX_FULL) 3659 setting = SUPPORTED_10baseT_Full; 3660 else if (cmd->base.duplex == DUPLEX_HALF) 3661 setting = SUPPORTED_10baseT_Half; 3662 else 3663 return -EINVAL; 3664 break; 3665 default: 3666 return -EINVAL; 3667 } 3668 3669 if ((setting & supported) == 0) 3670 return -EINVAL; 3671 3672 sky2->speed = speed; 3673 sky2->duplex = cmd->base.duplex; 3674 sky2->flags &= ~SKY2_FLAG_AUTO_SPEED; 3675 } 3676 3677 if (netif_running(dev)) { 3678 sky2_phy_reinit(sky2); 3679 sky2_set_multicast(dev); 3680 } 3681 3682 return 0; 3683 } 3684 3685 static void sky2_get_drvinfo(struct net_device *dev, 3686 struct ethtool_drvinfo *info) 3687 { 3688 struct sky2_port *sky2 = netdev_priv(dev); 3689 3690 strscpy(info->driver, DRV_NAME, sizeof(info->driver)); 3691 strscpy(info->version, DRV_VERSION, sizeof(info->version)); 3692 strscpy(info->bus_info, pci_name(sky2->hw->pdev), 3693 sizeof(info->bus_info)); 3694 } 3695 3696 static const struct sky2_stat { 3697 char name[ETH_GSTRING_LEN]; 3698 u16 offset; 3699 } sky2_stats[] = { 3700 { "tx_bytes", GM_TXO_OK_HI }, 3701 { "rx_bytes", GM_RXO_OK_HI }, 3702 { "tx_broadcast", GM_TXF_BC_OK }, 3703 { "rx_broadcast", GM_RXF_BC_OK }, 3704 { "tx_multicast", GM_TXF_MC_OK }, 3705 { "rx_multicast", GM_RXF_MC_OK }, 3706 { "tx_unicast", GM_TXF_UC_OK }, 3707 { "rx_unicast", GM_RXF_UC_OK }, 3708 { "tx_mac_pause", GM_TXF_MPAUSE }, 3709 { "rx_mac_pause", GM_RXF_MPAUSE }, 3710 { "collisions", GM_TXF_COL }, 3711 { "late_collision",GM_TXF_LAT_COL }, 3712 { "aborted", GM_TXF_ABO_COL }, 3713 { "single_collisions", GM_TXF_SNG_COL }, 3714 { "multi_collisions", GM_TXF_MUL_COL }, 3715 3716 { "rx_short", GM_RXF_SHT }, 3717 { "rx_runt", GM_RXE_FRAG }, 3718 { "rx_64_byte_packets", GM_RXF_64B }, 3719 { "rx_65_to_127_byte_packets", GM_RXF_127B }, 3720 { "rx_128_to_255_byte_packets", GM_RXF_255B }, 3721 { "rx_256_to_511_byte_packets", GM_RXF_511B }, 3722 { "rx_512_to_1023_byte_packets", GM_RXF_1023B }, 3723 { "rx_1024_to_1518_byte_packets", GM_RXF_1518B }, 3724 { "rx_1518_to_max_byte_packets", GM_RXF_MAX_SZ }, 3725 { "rx_too_long", GM_RXF_LNG_ERR }, 3726 { "rx_fifo_overflow", GM_RXE_FIFO_OV }, 3727 { "rx_jabber", GM_RXF_JAB_PKT }, 3728 { "rx_fcs_error", GM_RXF_FCS_ERR }, 3729 3730 { "tx_64_byte_packets", GM_TXF_64B }, 3731 { "tx_65_to_127_byte_packets", GM_TXF_127B }, 3732 { "tx_128_to_255_byte_packets", GM_TXF_255B }, 3733 { "tx_256_to_511_byte_packets", GM_TXF_511B }, 3734 { "tx_512_to_1023_byte_packets", GM_TXF_1023B }, 3735 { "tx_1024_to_1518_byte_packets", GM_TXF_1518B }, 3736 { "tx_1519_to_max_byte_packets", GM_TXF_MAX_SZ }, 3737 { "tx_fifo_underrun", GM_TXE_FIFO_UR }, 3738 }; 3739 3740 static u32 sky2_get_msglevel(struct net_device *netdev) 3741 { 3742 struct sky2_port *sky2 = netdev_priv(netdev); 3743 return sky2->msg_enable; 3744 } 3745 3746 static int sky2_nway_reset(struct net_device *dev) 3747 { 3748 struct sky2_port *sky2 = netdev_priv(dev); 3749 3750 if (!netif_running(dev) || !(sky2->flags & SKY2_FLAG_AUTO_SPEED)) 3751 return -EINVAL; 3752 3753 sky2_phy_reinit(sky2); 3754 sky2_set_multicast(dev); 3755 3756 return 0; 3757 } 3758 3759 static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count) 3760 { 3761 struct sky2_hw *hw = sky2->hw; 3762 unsigned port = sky2->port; 3763 int i; 3764 3765 data[0] = get_stats64(hw, port, GM_TXO_OK_LO); 3766 data[1] = get_stats64(hw, port, GM_RXO_OK_LO); 3767 3768 for (i = 2; i < count; i++) 3769 data[i] = get_stats32(hw, port, sky2_stats[i].offset); 3770 } 3771 3772 static void sky2_set_msglevel(struct net_device *netdev, u32 value) 3773 { 3774 struct sky2_port *sky2 = netdev_priv(netdev); 3775 sky2->msg_enable = value; 3776 } 3777 3778 static int sky2_get_sset_count(struct net_device *dev, int sset) 3779 { 3780 switch (sset) { 3781 case ETH_SS_STATS: 3782 return ARRAY_SIZE(sky2_stats); 3783 default: 3784 return -EOPNOTSUPP; 3785 } 3786 } 3787 3788 static void sky2_get_ethtool_stats(struct net_device *dev, 3789 struct ethtool_stats *stats, u64 * data) 3790 { 3791 struct sky2_port *sky2 = netdev_priv(dev); 3792 3793 sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats)); 3794 } 3795 3796 static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data) 3797 { 3798 int i; 3799 3800 switch (stringset) { 3801 case ETH_SS_STATS: 3802 for (i = 0; i < ARRAY_SIZE(sky2_stats); i++) 3803 memcpy(data + i * ETH_GSTRING_LEN, 3804 sky2_stats[i].name, ETH_GSTRING_LEN); 3805 break; 3806 } 3807 } 3808 3809 static int sky2_set_mac_address(struct net_device *dev, void *p) 3810 { 3811 struct sky2_port *sky2 = netdev_priv(dev); 3812 struct sky2_hw *hw = sky2->hw; 3813 unsigned port = sky2->port; 3814 const struct sockaddr *addr = p; 3815 3816 if (!is_valid_ether_addr(addr->sa_data)) 3817 return -EADDRNOTAVAIL; 3818 3819 eth_hw_addr_set(dev, addr->sa_data); 3820 memcpy_toio(hw->regs + B2_MAC_1 + port * 8, 3821 dev->dev_addr, ETH_ALEN); 3822 memcpy_toio(hw->regs + B2_MAC_2 + port * 8, 3823 dev->dev_addr, ETH_ALEN); 3824 3825 /* virtual address for data */ 3826 gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr); 3827 3828 /* physical address: used for pause frames */ 3829 gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr); 3830 3831 return 0; 3832 } 3833 3834 static inline void sky2_add_filter(u8 filter[8], const u8 *addr) 3835 { 3836 u32 bit; 3837 3838 bit = ether_crc(ETH_ALEN, addr) & 63; 3839 filter[bit >> 3] |= 1 << (bit & 7); 3840 } 3841 3842 static void sky2_set_multicast(struct net_device *dev) 3843 { 3844 struct sky2_port *sky2 = netdev_priv(dev); 3845 struct sky2_hw *hw = sky2->hw; 3846 unsigned port = sky2->port; 3847 struct netdev_hw_addr *ha; 3848 u16 reg; 3849 u8 filter[8]; 3850 int rx_pause; 3851 static const u8 pause_mc_addr[ETH_ALEN] = { 0x1, 0x80, 0xc2, 0x0, 0x0, 0x1 }; 3852 3853 rx_pause = (sky2->flow_status == FC_RX || sky2->flow_status == FC_BOTH); 3854 memset(filter, 0, sizeof(filter)); 3855 3856 reg = gma_read16(hw, port, GM_RX_CTRL); 3857 reg |= GM_RXCR_UCF_ENA; 3858 3859 if (dev->flags & IFF_PROMISC) /* promiscuous */ 3860 reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); 3861 else if (dev->flags & IFF_ALLMULTI) 3862 memset(filter, 0xff, sizeof(filter)); 3863 else if (netdev_mc_empty(dev) && !rx_pause) 3864 reg &= ~GM_RXCR_MCF_ENA; 3865 else { 3866 reg |= GM_RXCR_MCF_ENA; 3867 3868 if (rx_pause) 3869 sky2_add_filter(filter, pause_mc_addr); 3870 3871 netdev_for_each_mc_addr(ha, dev) 3872 sky2_add_filter(filter, ha->addr); 3873 } 3874 3875 gma_write16(hw, port, GM_MC_ADDR_H1, 3876 (u16) filter[0] | ((u16) filter[1] << 8)); 3877 gma_write16(hw, port, GM_MC_ADDR_H2, 3878 (u16) filter[2] | ((u16) filter[3] << 8)); 3879 gma_write16(hw, port, GM_MC_ADDR_H3, 3880 (u16) filter[4] | ((u16) filter[5] << 8)); 3881 gma_write16(hw, port, GM_MC_ADDR_H4, 3882 (u16) filter[6] | ((u16) filter[7] << 8)); 3883 3884 gma_write16(hw, port, GM_RX_CTRL, reg); 3885 } 3886 3887 static void sky2_get_stats(struct net_device *dev, 3888 struct rtnl_link_stats64 *stats) 3889 { 3890 struct sky2_port *sky2 = netdev_priv(dev); 3891 struct sky2_hw *hw = sky2->hw; 3892 unsigned port = sky2->port; 3893 unsigned int start; 3894 u64 _bytes, _packets; 3895 3896 do { 3897 start = u64_stats_fetch_begin(&sky2->rx_stats.syncp); 3898 _bytes = sky2->rx_stats.bytes; 3899 _packets = sky2->rx_stats.packets; 3900 } while (u64_stats_fetch_retry(&sky2->rx_stats.syncp, start)); 3901 3902 stats->rx_packets = _packets; 3903 stats->rx_bytes = _bytes; 3904 3905 do { 3906 start = u64_stats_fetch_begin(&sky2->tx_stats.syncp); 3907 _bytes = sky2->tx_stats.bytes; 3908 _packets = sky2->tx_stats.packets; 3909 } while (u64_stats_fetch_retry(&sky2->tx_stats.syncp, start)); 3910 3911 stats->tx_packets = _packets; 3912 stats->tx_bytes = _bytes; 3913 3914 stats->multicast = get_stats32(hw, port, GM_RXF_MC_OK) 3915 + get_stats32(hw, port, GM_RXF_BC_OK); 3916 3917 stats->collisions = get_stats32(hw, port, GM_TXF_COL); 3918 3919 stats->rx_length_errors = get_stats32(hw, port, GM_RXF_LNG_ERR); 3920 stats->rx_crc_errors = get_stats32(hw, port, GM_RXF_FCS_ERR); 3921 stats->rx_frame_errors = get_stats32(hw, port, GM_RXF_SHT) 3922 + get_stats32(hw, port, GM_RXE_FRAG); 3923 stats->rx_over_errors = get_stats32(hw, port, GM_RXE_FIFO_OV); 3924 3925 stats->rx_dropped = dev->stats.rx_dropped; 3926 stats->rx_fifo_errors = dev->stats.rx_fifo_errors; 3927 stats->tx_fifo_errors = dev->stats.tx_fifo_errors; 3928 } 3929 3930 /* Can have one global because blinking is controlled by 3931 * ethtool and that is always under RTNL mutex 3932 */ 3933 static void sky2_led(struct sky2_port *sky2, enum led_mode mode) 3934 { 3935 struct sky2_hw *hw = sky2->hw; 3936 unsigned port = sky2->port; 3937 3938 spin_lock_bh(&sky2->phy_lock); 3939 if (hw->chip_id == CHIP_ID_YUKON_EC_U || 3940 hw->chip_id == CHIP_ID_YUKON_EX || 3941 hw->chip_id == CHIP_ID_YUKON_SUPR) { 3942 u16 pg; 3943 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); 3944 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); 3945 3946 switch (mode) { 3947 case MO_LED_OFF: 3948 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, 3949 PHY_M_LEDC_LOS_CTRL(8) | 3950 PHY_M_LEDC_INIT_CTRL(8) | 3951 PHY_M_LEDC_STA1_CTRL(8) | 3952 PHY_M_LEDC_STA0_CTRL(8)); 3953 break; 3954 case MO_LED_ON: 3955 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, 3956 PHY_M_LEDC_LOS_CTRL(9) | 3957 PHY_M_LEDC_INIT_CTRL(9) | 3958 PHY_M_LEDC_STA1_CTRL(9) | 3959 PHY_M_LEDC_STA0_CTRL(9)); 3960 break; 3961 case MO_LED_BLINK: 3962 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, 3963 PHY_M_LEDC_LOS_CTRL(0xa) | 3964 PHY_M_LEDC_INIT_CTRL(0xa) | 3965 PHY_M_LEDC_STA1_CTRL(0xa) | 3966 PHY_M_LEDC_STA0_CTRL(0xa)); 3967 break; 3968 case MO_LED_NORM: 3969 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, 3970 PHY_M_LEDC_LOS_CTRL(1) | 3971 PHY_M_LEDC_INIT_CTRL(8) | 3972 PHY_M_LEDC_STA1_CTRL(7) | 3973 PHY_M_LEDC_STA0_CTRL(7)); 3974 } 3975 3976 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); 3977 } else 3978 gm_phy_write(hw, port, PHY_MARV_LED_OVER, 3979 PHY_M_LED_MO_DUP(mode) | 3980 PHY_M_LED_MO_10(mode) | 3981 PHY_M_LED_MO_100(mode) | 3982 PHY_M_LED_MO_1000(mode) | 3983 PHY_M_LED_MO_RX(mode) | 3984 PHY_M_LED_MO_TX(mode)); 3985 3986 spin_unlock_bh(&sky2->phy_lock); 3987 } 3988 3989 /* blink LED's for finding board */ 3990 static int sky2_set_phys_id(struct net_device *dev, 3991 enum ethtool_phys_id_state state) 3992 { 3993 struct sky2_port *sky2 = netdev_priv(dev); 3994 3995 switch (state) { 3996 case ETHTOOL_ID_ACTIVE: 3997 return 1; /* cycle on/off once per second */ 3998 case ETHTOOL_ID_INACTIVE: 3999 sky2_led(sky2, MO_LED_NORM); 4000 break; 4001 case ETHTOOL_ID_ON: 4002 sky2_led(sky2, MO_LED_ON); 4003 break; 4004 case ETHTOOL_ID_OFF: 4005 sky2_led(sky2, MO_LED_OFF); 4006 break; 4007 } 4008 4009 return 0; 4010 } 4011 4012 static void sky2_get_pauseparam(struct net_device *dev, 4013 struct ethtool_pauseparam *ecmd) 4014 { 4015 struct sky2_port *sky2 = netdev_priv(dev); 4016 4017 switch (sky2->flow_mode) { 4018 case FC_NONE: 4019 ecmd->tx_pause = ecmd->rx_pause = 0; 4020 break; 4021 case FC_TX: 4022 ecmd->tx_pause = 1, ecmd->rx_pause = 0; 4023 break; 4024 case FC_RX: 4025 ecmd->tx_pause = 0, ecmd->rx_pause = 1; 4026 break; 4027 case FC_BOTH: 4028 ecmd->tx_pause = ecmd->rx_pause = 1; 4029 } 4030 4031 ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_PAUSE) 4032 ? AUTONEG_ENABLE : AUTONEG_DISABLE; 4033 } 4034 4035 static int sky2_set_pauseparam(struct net_device *dev, 4036 struct ethtool_pauseparam *ecmd) 4037 { 4038 struct sky2_port *sky2 = netdev_priv(dev); 4039 4040 if (ecmd->autoneg == AUTONEG_ENABLE) 4041 sky2->flags |= SKY2_FLAG_AUTO_PAUSE; 4042 else 4043 sky2->flags &= ~SKY2_FLAG_AUTO_PAUSE; 4044 4045 sky2->flow_mode = sky2_flow(ecmd->rx_pause, ecmd->tx_pause); 4046 4047 if (netif_running(dev)) 4048 sky2_phy_reinit(sky2); 4049 4050 return 0; 4051 } 4052 4053 static int sky2_get_coalesce(struct net_device *dev, 4054 struct ethtool_coalesce *ecmd, 4055 struct kernel_ethtool_coalesce *kernel_coal, 4056 struct netlink_ext_ack *extack) 4057 { 4058 struct sky2_port *sky2 = netdev_priv(dev); 4059 struct sky2_hw *hw = sky2->hw; 4060 4061 if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP) 4062 ecmd->tx_coalesce_usecs = 0; 4063 else { 4064 u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI); 4065 ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks); 4066 } 4067 ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH); 4068 4069 if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP) 4070 ecmd->rx_coalesce_usecs = 0; 4071 else { 4072 u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI); 4073 ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks); 4074 } 4075 ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM); 4076 4077 if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP) 4078 ecmd->rx_coalesce_usecs_irq = 0; 4079 else { 4080 u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI); 4081 ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks); 4082 } 4083 4084 ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM); 4085 4086 return 0; 4087 } 4088 4089 /* Note: this affect both ports */ 4090 static int sky2_set_coalesce(struct net_device *dev, 4091 struct ethtool_coalesce *ecmd, 4092 struct kernel_ethtool_coalesce *kernel_coal, 4093 struct netlink_ext_ack *extack) 4094 { 4095 struct sky2_port *sky2 = netdev_priv(dev); 4096 struct sky2_hw *hw = sky2->hw; 4097 const u32 tmax = sky2_clk2us(hw, 0x0ffffff); 4098 4099 if (ecmd->tx_coalesce_usecs > tmax || 4100 ecmd->rx_coalesce_usecs > tmax || 4101 ecmd->rx_coalesce_usecs_irq > tmax) 4102 return -EINVAL; 4103 4104 if (ecmd->tx_max_coalesced_frames >= sky2->tx_ring_size-1) 4105 return -EINVAL; 4106 if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING) 4107 return -EINVAL; 4108 if (ecmd->rx_max_coalesced_frames_irq > RX_MAX_PENDING) 4109 return -EINVAL; 4110 4111 if (ecmd->tx_coalesce_usecs == 0) 4112 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP); 4113 else { 4114 sky2_write32(hw, STAT_TX_TIMER_INI, 4115 sky2_us2clk(hw, ecmd->tx_coalesce_usecs)); 4116 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); 4117 } 4118 sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames); 4119 4120 if (ecmd->rx_coalesce_usecs == 0) 4121 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP); 4122 else { 4123 sky2_write32(hw, STAT_LEV_TIMER_INI, 4124 sky2_us2clk(hw, ecmd->rx_coalesce_usecs)); 4125 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START); 4126 } 4127 sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames); 4128 4129 if (ecmd->rx_coalesce_usecs_irq == 0) 4130 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP); 4131 else { 4132 sky2_write32(hw, STAT_ISR_TIMER_INI, 4133 sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq)); 4134 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START); 4135 } 4136 sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq); 4137 return 0; 4138 } 4139 4140 /* 4141 * Hardware is limited to min of 128 and max of 2048 for ring size 4142 * and rounded up to next power of two 4143 * to avoid division in modulus calculation 4144 */ 4145 static unsigned long roundup_ring_size(unsigned long pending) 4146 { 4147 return max(128ul, roundup_pow_of_two(pending+1)); 4148 } 4149 4150 static void sky2_get_ringparam(struct net_device *dev, 4151 struct ethtool_ringparam *ering, 4152 struct kernel_ethtool_ringparam *kernel_ering, 4153 struct netlink_ext_ack *extack) 4154 { 4155 struct sky2_port *sky2 = netdev_priv(dev); 4156 4157 ering->rx_max_pending = RX_MAX_PENDING; 4158 ering->tx_max_pending = TX_MAX_PENDING; 4159 4160 ering->rx_pending = sky2->rx_pending; 4161 ering->tx_pending = sky2->tx_pending; 4162 } 4163 4164 static int sky2_set_ringparam(struct net_device *dev, 4165 struct ethtool_ringparam *ering, 4166 struct kernel_ethtool_ringparam *kernel_ering, 4167 struct netlink_ext_ack *extack) 4168 { 4169 struct sky2_port *sky2 = netdev_priv(dev); 4170 4171 if (ering->rx_pending > RX_MAX_PENDING || 4172 ering->rx_pending < 8 || 4173 ering->tx_pending < TX_MIN_PENDING || 4174 ering->tx_pending > TX_MAX_PENDING) 4175 return -EINVAL; 4176 4177 sky2_detach(dev); 4178 4179 sky2->rx_pending = ering->rx_pending; 4180 sky2->tx_pending = ering->tx_pending; 4181 sky2->tx_ring_size = roundup_ring_size(sky2->tx_pending); 4182 4183 return sky2_reattach(dev); 4184 } 4185 4186 static int sky2_get_regs_len(struct net_device *dev) 4187 { 4188 return 0x4000; 4189 } 4190 4191 static int sky2_reg_access_ok(struct sky2_hw *hw, unsigned int b) 4192 { 4193 /* This complicated switch statement is to make sure and 4194 * only access regions that are unreserved. 4195 * Some blocks are only valid on dual port cards. 4196 */ 4197 switch (b) { 4198 /* second port */ 4199 case 5: /* Tx Arbiter 2 */ 4200 case 9: /* RX2 */ 4201 case 14 ... 15: /* TX2 */ 4202 case 17: case 19: /* Ram Buffer 2 */ 4203 case 22 ... 23: /* Tx Ram Buffer 2 */ 4204 case 25: /* Rx MAC Fifo 1 */ 4205 case 27: /* Tx MAC Fifo 2 */ 4206 case 31: /* GPHY 2 */ 4207 case 40 ... 47: /* Pattern Ram 2 */ 4208 case 52: case 54: /* TCP Segmentation 2 */ 4209 case 112 ... 116: /* GMAC 2 */ 4210 return hw->ports > 1; 4211 4212 case 0: /* Control */ 4213 case 2: /* Mac address */ 4214 case 4: /* Tx Arbiter 1 */ 4215 case 7: /* PCI express reg */ 4216 case 8: /* RX1 */ 4217 case 12 ... 13: /* TX1 */ 4218 case 16: case 18:/* Rx Ram Buffer 1 */ 4219 case 20 ... 21: /* Tx Ram Buffer 1 */ 4220 case 24: /* Rx MAC Fifo 1 */ 4221 case 26: /* Tx MAC Fifo 1 */ 4222 case 28 ... 29: /* Descriptor and status unit */ 4223 case 30: /* GPHY 1*/ 4224 case 32 ... 39: /* Pattern Ram 1 */ 4225 case 48: case 50: /* TCP Segmentation 1 */ 4226 case 56 ... 60: /* PCI space */ 4227 case 80 ... 84: /* GMAC 1 */ 4228 return 1; 4229 4230 default: 4231 return 0; 4232 } 4233 } 4234 4235 /* 4236 * Returns copy of control register region 4237 * Note: ethtool_get_regs always provides full size (16k) buffer 4238 */ 4239 static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs, 4240 void *p) 4241 { 4242 const struct sky2_port *sky2 = netdev_priv(dev); 4243 const void __iomem *io = sky2->hw->regs; 4244 unsigned int b; 4245 4246 regs->version = 1; 4247 4248 for (b = 0; b < 128; b++) { 4249 /* skip poisonous diagnostic ram region in block 3 */ 4250 if (b == 3) 4251 memcpy_fromio(p + 0x10, io + 0x10, 128 - 0x10); 4252 else if (sky2_reg_access_ok(sky2->hw, b)) 4253 memcpy_fromio(p, io, 128); 4254 else 4255 memset(p, 0, 128); 4256 4257 p += 128; 4258 io += 128; 4259 } 4260 } 4261 4262 static int sky2_get_eeprom_len(struct net_device *dev) 4263 { 4264 struct sky2_port *sky2 = netdev_priv(dev); 4265 struct sky2_hw *hw = sky2->hw; 4266 u16 reg2; 4267 4268 reg2 = sky2_pci_read16(hw, PCI_DEV_REG2); 4269 return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8); 4270 } 4271 4272 static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, 4273 u8 *data) 4274 { 4275 struct sky2_port *sky2 = netdev_priv(dev); 4276 int rc; 4277 4278 eeprom->magic = SKY2_EEPROM_MAGIC; 4279 rc = pci_read_vpd_any(sky2->hw->pdev, eeprom->offset, eeprom->len, 4280 data); 4281 if (rc < 0) 4282 return rc; 4283 4284 eeprom->len = rc; 4285 4286 return 0; 4287 } 4288 4289 static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, 4290 u8 *data) 4291 { 4292 struct sky2_port *sky2 = netdev_priv(dev); 4293 int rc; 4294 4295 if (eeprom->magic != SKY2_EEPROM_MAGIC) 4296 return -EINVAL; 4297 4298 rc = pci_write_vpd_any(sky2->hw->pdev, eeprom->offset, eeprom->len, 4299 data); 4300 4301 return rc < 0 ? rc : 0; 4302 } 4303 4304 static netdev_features_t sky2_fix_features(struct net_device *dev, 4305 netdev_features_t features) 4306 { 4307 const struct sky2_port *sky2 = netdev_priv(dev); 4308 const struct sky2_hw *hw = sky2->hw; 4309 4310 /* In order to do Jumbo packets on these chips, need to turn off the 4311 * transmit store/forward. Therefore checksum offload won't work. 4312 */ 4313 if (dev->mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U) { 4314 netdev_info(dev, "checksum offload not possible with jumbo frames\n"); 4315 features &= ~(NETIF_F_TSO | NETIF_F_SG | NETIF_F_CSUM_MASK); 4316 } 4317 4318 /* Some hardware requires receive checksum for RSS to work. */ 4319 if ( (features & NETIF_F_RXHASH) && 4320 !(features & NETIF_F_RXCSUM) && 4321 (sky2->hw->flags & SKY2_HW_RSS_CHKSUM)) { 4322 netdev_info(dev, "receive hashing forces receive checksum\n"); 4323 features |= NETIF_F_RXCSUM; 4324 } 4325 4326 return features; 4327 } 4328 4329 static int sky2_set_features(struct net_device *dev, netdev_features_t features) 4330 { 4331 struct sky2_port *sky2 = netdev_priv(dev); 4332 netdev_features_t changed = dev->features ^ features; 4333 4334 if ((changed & NETIF_F_RXCSUM) && 4335 !(sky2->hw->flags & SKY2_HW_NEW_LE)) { 4336 sky2_write32(sky2->hw, 4337 Q_ADDR(rxqaddr[sky2->port], Q_CSR), 4338 (features & NETIF_F_RXCSUM) 4339 ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); 4340 } 4341 4342 if (changed & NETIF_F_RXHASH) 4343 rx_set_rss(dev, features); 4344 4345 if (changed & (NETIF_F_HW_VLAN_CTAG_TX|NETIF_F_HW_VLAN_CTAG_RX)) 4346 sky2_vlan_mode(dev, features); 4347 4348 return 0; 4349 } 4350 4351 static const struct ethtool_ops sky2_ethtool_ops = { 4352 .supported_coalesce_params = ETHTOOL_COALESCE_USECS | 4353 ETHTOOL_COALESCE_MAX_FRAMES | 4354 ETHTOOL_COALESCE_RX_USECS_IRQ | 4355 ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ, 4356 .get_drvinfo = sky2_get_drvinfo, 4357 .get_wol = sky2_get_wol, 4358 .set_wol = sky2_set_wol, 4359 .get_msglevel = sky2_get_msglevel, 4360 .set_msglevel = sky2_set_msglevel, 4361 .nway_reset = sky2_nway_reset, 4362 .get_regs_len = sky2_get_regs_len, 4363 .get_regs = sky2_get_regs, 4364 .get_link = ethtool_op_get_link, 4365 .get_eeprom_len = sky2_get_eeprom_len, 4366 .get_eeprom = sky2_get_eeprom, 4367 .set_eeprom = sky2_set_eeprom, 4368 .get_strings = sky2_get_strings, 4369 .get_coalesce = sky2_get_coalesce, 4370 .set_coalesce = sky2_set_coalesce, 4371 .get_ringparam = sky2_get_ringparam, 4372 .set_ringparam = sky2_set_ringparam, 4373 .get_pauseparam = sky2_get_pauseparam, 4374 .set_pauseparam = sky2_set_pauseparam, 4375 .set_phys_id = sky2_set_phys_id, 4376 .get_sset_count = sky2_get_sset_count, 4377 .get_ethtool_stats = sky2_get_ethtool_stats, 4378 .get_link_ksettings = sky2_get_link_ksettings, 4379 .set_link_ksettings = sky2_set_link_ksettings, 4380 }; 4381 4382 #ifdef CONFIG_SKY2_DEBUG 4383 4384 static struct dentry *sky2_debug; 4385 4386 static int sky2_debug_show(struct seq_file *seq, void *v) 4387 { 4388 struct net_device *dev = seq->private; 4389 const struct sky2_port *sky2 = netdev_priv(dev); 4390 struct sky2_hw *hw = sky2->hw; 4391 unsigned port = sky2->port; 4392 unsigned idx, last; 4393 int sop; 4394 4395 seq_printf(seq, "IRQ src=%x mask=%x control=%x\n", 4396 sky2_read32(hw, B0_ISRC), 4397 sky2_read32(hw, B0_IMSK), 4398 sky2_read32(hw, B0_Y2_SP_ICR)); 4399 4400 if (!netif_running(dev)) { 4401 seq_puts(seq, "network not running\n"); 4402 return 0; 4403 } 4404 4405 napi_disable(&hw->napi); 4406 last = sky2_read16(hw, STAT_PUT_IDX); 4407 4408 seq_printf(seq, "Status ring %u\n", hw->st_size); 4409 if (hw->st_idx == last) 4410 seq_puts(seq, "Status ring (empty)\n"); 4411 else { 4412 seq_puts(seq, "Status ring\n"); 4413 for (idx = hw->st_idx; idx != last && idx < hw->st_size; 4414 idx = RING_NEXT(idx, hw->st_size)) { 4415 const struct sky2_status_le *le = hw->st_le + idx; 4416 seq_printf(seq, "[%d] %#x %d %#x\n", 4417 idx, le->opcode, le->length, le->status); 4418 } 4419 seq_puts(seq, "\n"); 4420 } 4421 4422 seq_printf(seq, "Tx ring pending=%u...%u report=%d done=%d\n", 4423 sky2->tx_cons, sky2->tx_prod, 4424 sky2_read16(hw, port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX), 4425 sky2_read16(hw, Q_ADDR(txqaddr[port], Q_DONE))); 4426 4427 /* Dump contents of tx ring */ 4428 sop = 1; 4429 for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size; 4430 idx = RING_NEXT(idx, sky2->tx_ring_size)) { 4431 const struct sky2_tx_le *le = sky2->tx_le + idx; 4432 u32 a = le32_to_cpu(le->addr); 4433 4434 if (sop) 4435 seq_printf(seq, "%u:", idx); 4436 sop = 0; 4437 4438 switch (le->opcode & ~HW_OWNER) { 4439 case OP_ADDR64: 4440 seq_printf(seq, " %#x:", a); 4441 break; 4442 case OP_LRGLEN: 4443 seq_printf(seq, " mtu=%d", a); 4444 break; 4445 case OP_VLAN: 4446 seq_printf(seq, " vlan=%d", be16_to_cpu(le->length)); 4447 break; 4448 case OP_TCPLISW: 4449 seq_printf(seq, " csum=%#x", a); 4450 break; 4451 case OP_LARGESEND: 4452 seq_printf(seq, " tso=%#x(%d)", a, le16_to_cpu(le->length)); 4453 break; 4454 case OP_PACKET: 4455 seq_printf(seq, " %#x(%d)", a, le16_to_cpu(le->length)); 4456 break; 4457 case OP_BUFFER: 4458 seq_printf(seq, " frag=%#x(%d)", a, le16_to_cpu(le->length)); 4459 break; 4460 default: 4461 seq_printf(seq, " op=%#x,%#x(%d)", le->opcode, 4462 a, le16_to_cpu(le->length)); 4463 } 4464 4465 if (le->ctrl & EOP) { 4466 seq_putc(seq, '\n'); 4467 sop = 1; 4468 } 4469 } 4470 4471 seq_printf(seq, "\nRx ring hw get=%d put=%d last=%d\n", 4472 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_GET_IDX)), 4473 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)), 4474 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_LAST_IDX))); 4475 4476 sky2_read32(hw, B0_Y2_SP_LISR); 4477 napi_enable(&hw->napi); 4478 return 0; 4479 } 4480 DEFINE_SHOW_ATTRIBUTE(sky2_debug); 4481 4482 /* 4483 * Use network device events to create/remove/rename 4484 * debugfs file entries 4485 */ 4486 static int sky2_device_event(struct notifier_block *unused, 4487 unsigned long event, void *ptr) 4488 { 4489 struct net_device *dev = netdev_notifier_info_to_dev(ptr); 4490 struct sky2_port *sky2 = netdev_priv(dev); 4491 4492 if (dev->netdev_ops->ndo_open != sky2_open || !sky2_debug) 4493 return NOTIFY_DONE; 4494 4495 switch (event) { 4496 case NETDEV_CHANGENAME: 4497 if (sky2->debugfs) { 4498 sky2->debugfs = debugfs_rename(sky2_debug, sky2->debugfs, 4499 sky2_debug, dev->name); 4500 } 4501 break; 4502 4503 case NETDEV_GOING_DOWN: 4504 if (sky2->debugfs) { 4505 netdev_printk(KERN_DEBUG, dev, "remove debugfs\n"); 4506 debugfs_remove(sky2->debugfs); 4507 sky2->debugfs = NULL; 4508 } 4509 break; 4510 4511 case NETDEV_UP: 4512 sky2->debugfs = debugfs_create_file(dev->name, 0444, 4513 sky2_debug, dev, 4514 &sky2_debug_fops); 4515 if (IS_ERR(sky2->debugfs)) 4516 sky2->debugfs = NULL; 4517 } 4518 4519 return NOTIFY_DONE; 4520 } 4521 4522 static struct notifier_block sky2_notifier = { 4523 .notifier_call = sky2_device_event, 4524 }; 4525 4526 4527 static __init void sky2_debug_init(void) 4528 { 4529 struct dentry *ent; 4530 4531 ent = debugfs_create_dir("sky2", NULL); 4532 if (IS_ERR(ent)) 4533 return; 4534 4535 sky2_debug = ent; 4536 register_netdevice_notifier(&sky2_notifier); 4537 } 4538 4539 static __exit void sky2_debug_cleanup(void) 4540 { 4541 if (sky2_debug) { 4542 unregister_netdevice_notifier(&sky2_notifier); 4543 debugfs_remove(sky2_debug); 4544 sky2_debug = NULL; 4545 } 4546 } 4547 4548 #else 4549 #define sky2_debug_init() 4550 #define sky2_debug_cleanup() 4551 #endif 4552 4553 /* Two copies of network device operations to handle special case of 4554 * not allowing netpoll on second port 4555 */ 4556 static const struct net_device_ops sky2_netdev_ops[2] = { 4557 { 4558 .ndo_open = sky2_open, 4559 .ndo_stop = sky2_close, 4560 .ndo_start_xmit = sky2_xmit_frame, 4561 .ndo_eth_ioctl = sky2_ioctl, 4562 .ndo_validate_addr = eth_validate_addr, 4563 .ndo_set_mac_address = sky2_set_mac_address, 4564 .ndo_set_rx_mode = sky2_set_multicast, 4565 .ndo_change_mtu = sky2_change_mtu, 4566 .ndo_fix_features = sky2_fix_features, 4567 .ndo_set_features = sky2_set_features, 4568 .ndo_tx_timeout = sky2_tx_timeout, 4569 .ndo_get_stats64 = sky2_get_stats, 4570 #ifdef CONFIG_NET_POLL_CONTROLLER 4571 .ndo_poll_controller = sky2_netpoll, 4572 #endif 4573 }, 4574 { 4575 .ndo_open = sky2_open, 4576 .ndo_stop = sky2_close, 4577 .ndo_start_xmit = sky2_xmit_frame, 4578 .ndo_eth_ioctl = sky2_ioctl, 4579 .ndo_validate_addr = eth_validate_addr, 4580 .ndo_set_mac_address = sky2_set_mac_address, 4581 .ndo_set_rx_mode = sky2_set_multicast, 4582 .ndo_change_mtu = sky2_change_mtu, 4583 .ndo_fix_features = sky2_fix_features, 4584 .ndo_set_features = sky2_set_features, 4585 .ndo_tx_timeout = sky2_tx_timeout, 4586 .ndo_get_stats64 = sky2_get_stats, 4587 }, 4588 }; 4589 4590 /* Initialize network device */ 4591 static struct net_device *sky2_init_netdev(struct sky2_hw *hw, unsigned port, 4592 int highmem, int wol) 4593 { 4594 struct sky2_port *sky2; 4595 struct net_device *dev = alloc_etherdev(sizeof(*sky2)); 4596 int ret; 4597 4598 if (!dev) 4599 return NULL; 4600 4601 SET_NETDEV_DEV(dev, &hw->pdev->dev); 4602 dev->irq = hw->pdev->irq; 4603 dev->ethtool_ops = &sky2_ethtool_ops; 4604 dev->watchdog_timeo = TX_WATCHDOG; 4605 dev->netdev_ops = &sky2_netdev_ops[port]; 4606 4607 sky2 = netdev_priv(dev); 4608 sky2->netdev = dev; 4609 sky2->hw = hw; 4610 sky2->msg_enable = netif_msg_init(debug, default_msg); 4611 4612 u64_stats_init(&sky2->tx_stats.syncp); 4613 u64_stats_init(&sky2->rx_stats.syncp); 4614 4615 /* Auto speed and flow control */ 4616 sky2->flags = SKY2_FLAG_AUTO_SPEED | SKY2_FLAG_AUTO_PAUSE; 4617 if (hw->chip_id != CHIP_ID_YUKON_XL) 4618 dev->hw_features |= NETIF_F_RXCSUM; 4619 4620 sky2->flow_mode = FC_BOTH; 4621 4622 sky2->duplex = -1; 4623 sky2->speed = -1; 4624 sky2->advertising = sky2_supported_modes(hw); 4625 sky2->wol = wol; 4626 4627 spin_lock_init(&sky2->phy_lock); 4628 4629 sky2->tx_pending = TX_DEF_PENDING; 4630 sky2->tx_ring_size = roundup_ring_size(TX_DEF_PENDING); 4631 sky2->rx_pending = RX_DEF_PENDING; 4632 4633 hw->dev[port] = dev; 4634 4635 sky2->port = port; 4636 4637 dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO; 4638 4639 if (highmem) 4640 dev->features |= NETIF_F_HIGHDMA; 4641 4642 /* Enable receive hashing unless hardware is known broken */ 4643 if (!(hw->flags & SKY2_HW_RSS_BROKEN)) 4644 dev->hw_features |= NETIF_F_RXHASH; 4645 4646 if (!(hw->flags & SKY2_HW_VLAN_BROKEN)) { 4647 dev->hw_features |= NETIF_F_HW_VLAN_CTAG_TX | 4648 NETIF_F_HW_VLAN_CTAG_RX; 4649 dev->vlan_features |= SKY2_VLAN_OFFLOADS; 4650 } 4651 4652 dev->features |= dev->hw_features; 4653 4654 /* MTU range: 60 - 1500 or 9000 */ 4655 dev->min_mtu = ETH_ZLEN; 4656 if (hw->chip_id == CHIP_ID_YUKON_FE || 4657 hw->chip_id == CHIP_ID_YUKON_FE_P) 4658 dev->max_mtu = ETH_DATA_LEN; 4659 else 4660 dev->max_mtu = ETH_JUMBO_MTU; 4661 4662 /* try to get mac address in the following order: 4663 * 1) from device tree data 4664 * 2) from internal registers set by bootloader 4665 */ 4666 ret = of_get_ethdev_address(hw->pdev->dev.of_node, dev); 4667 if (ret) { 4668 u8 addr[ETH_ALEN]; 4669 4670 memcpy_fromio(addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN); 4671 eth_hw_addr_set(dev, addr); 4672 } 4673 4674 /* if the address is invalid, use a random value */ 4675 if (!is_valid_ether_addr(dev->dev_addr)) { 4676 struct sockaddr sa = { AF_UNSPEC }; 4677 4678 dev_warn(&hw->pdev->dev, "Invalid MAC address, defaulting to random\n"); 4679 eth_hw_addr_random(dev); 4680 memcpy(sa.sa_data, dev->dev_addr, ETH_ALEN); 4681 if (sky2_set_mac_address(dev, &sa)) 4682 dev_warn(&hw->pdev->dev, "Failed to set MAC address.\n"); 4683 } 4684 4685 return dev; 4686 } 4687 4688 static void sky2_show_addr(struct net_device *dev) 4689 { 4690 const struct sky2_port *sky2 = netdev_priv(dev); 4691 4692 netif_info(sky2, probe, dev, "addr %pM\n", dev->dev_addr); 4693 } 4694 4695 /* Handle software interrupt used during MSI test */ 4696 static irqreturn_t sky2_test_intr(int irq, void *dev_id) 4697 { 4698 struct sky2_hw *hw = dev_id; 4699 u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2); 4700 4701 if (status == 0) 4702 return IRQ_NONE; 4703 4704 if (status & Y2_IS_IRQ_SW) { 4705 hw->flags |= SKY2_HW_USE_MSI; 4706 wake_up(&hw->msi_wait); 4707 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); 4708 } 4709 sky2_write32(hw, B0_Y2_SP_ICR, 2); 4710 4711 return IRQ_HANDLED; 4712 } 4713 4714 /* Test interrupt path by forcing a software IRQ */ 4715 static int sky2_test_msi(struct sky2_hw *hw) 4716 { 4717 struct pci_dev *pdev = hw->pdev; 4718 int err; 4719 4720 init_waitqueue_head(&hw->msi_wait); 4721 4722 err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw); 4723 if (err) { 4724 dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); 4725 return err; 4726 } 4727 4728 sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW); 4729 4730 sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ); 4731 sky2_read8(hw, B0_CTST); 4732 4733 wait_event_timeout(hw->msi_wait, (hw->flags & SKY2_HW_USE_MSI), HZ/10); 4734 4735 if (!(hw->flags & SKY2_HW_USE_MSI)) { 4736 /* MSI test failed, go back to INTx mode */ 4737 dev_info(&pdev->dev, "No interrupt generated using MSI, " 4738 "switching to INTx mode.\n"); 4739 4740 err = -EOPNOTSUPP; 4741 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); 4742 } 4743 4744 sky2_write32(hw, B0_IMSK, 0); 4745 sky2_read32(hw, B0_IMSK); 4746 4747 free_irq(pdev->irq, hw); 4748 4749 return err; 4750 } 4751 4752 /* This driver supports yukon2 chipset only */ 4753 static const char *sky2_name(u8 chipid, char *buf, int sz) 4754 { 4755 static const char *const name[] = { 4756 "XL", /* 0xb3 */ 4757 "EC Ultra", /* 0xb4 */ 4758 "Extreme", /* 0xb5 */ 4759 "EC", /* 0xb6 */ 4760 "FE", /* 0xb7 */ 4761 "FE+", /* 0xb8 */ 4762 "Supreme", /* 0xb9 */ 4763 "UL 2", /* 0xba */ 4764 "Unknown", /* 0xbb */ 4765 "Optima", /* 0xbc */ 4766 "OptimaEEE", /* 0xbd */ 4767 "Optima 2", /* 0xbe */ 4768 }; 4769 4770 if (chipid >= CHIP_ID_YUKON_XL && chipid <= CHIP_ID_YUKON_OP_2) 4771 snprintf(buf, sz, "%s", name[chipid - CHIP_ID_YUKON_XL]); 4772 else 4773 snprintf(buf, sz, "(chip %#x)", chipid); 4774 return buf; 4775 } 4776 4777 static const struct dmi_system_id msi_blacklist[] = { 4778 { 4779 .ident = "Dell Inspiron 1545", 4780 .matches = { 4781 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), 4782 DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1545"), 4783 }, 4784 }, 4785 { 4786 .ident = "Gateway P-79", 4787 .matches = { 4788 DMI_MATCH(DMI_SYS_VENDOR, "Gateway"), 4789 DMI_MATCH(DMI_PRODUCT_NAME, "P-79"), 4790 }, 4791 }, 4792 { 4793 .ident = "ASUS P5W DH Deluxe", 4794 .matches = { 4795 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTEK COMPUTER INC"), 4796 DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"), 4797 }, 4798 }, 4799 { 4800 .ident = "ASUS P6T", 4801 .matches = { 4802 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 4803 DMI_MATCH(DMI_BOARD_NAME, "P6T"), 4804 }, 4805 }, 4806 { 4807 .ident = "ASUS P6X", 4808 .matches = { 4809 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 4810 DMI_MATCH(DMI_BOARD_NAME, "P6X"), 4811 }, 4812 }, 4813 {} 4814 }; 4815 4816 static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) 4817 { 4818 struct net_device *dev, *dev1; 4819 struct sky2_hw *hw; 4820 int err, using_dac = 0, wol_default; 4821 u32 reg; 4822 char buf1[16]; 4823 4824 err = pci_enable_device(pdev); 4825 if (err) { 4826 dev_err(&pdev->dev, "cannot enable PCI device\n"); 4827 goto err_out; 4828 } 4829 4830 /* Get configuration information 4831 * Note: only regular PCI config access once to test for HW issues 4832 * other PCI access through shared memory for speed and to 4833 * avoid MMCONFIG problems. 4834 */ 4835 err = pci_read_config_dword(pdev, PCI_DEV_REG2, ®); 4836 if (err) { 4837 dev_err(&pdev->dev, "PCI read config failed\n"); 4838 goto err_out_disable; 4839 } 4840 4841 if (~reg == 0) { 4842 dev_err(&pdev->dev, "PCI configuration read error\n"); 4843 err = -EIO; 4844 goto err_out_disable; 4845 } 4846 4847 err = pci_request_regions(pdev, DRV_NAME); 4848 if (err) { 4849 dev_err(&pdev->dev, "cannot obtain PCI resources\n"); 4850 goto err_out_disable; 4851 } 4852 4853 pci_set_master(pdev); 4854 4855 if (sizeof(dma_addr_t) > sizeof(u32) && 4856 !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) { 4857 using_dac = 1; 4858 err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); 4859 if (err < 0) { 4860 dev_err(&pdev->dev, "unable to obtain 64 bit DMA " 4861 "for consistent allocations\n"); 4862 goto err_out_free_regions; 4863 } 4864 } else { 4865 err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); 4866 if (err) { 4867 dev_err(&pdev->dev, "no usable DMA configuration\n"); 4868 goto err_out_free_regions; 4869 } 4870 } 4871 4872 4873 #ifdef __BIG_ENDIAN 4874 /* The sk98lin vendor driver uses hardware byte swapping but 4875 * this driver uses software swapping. 4876 */ 4877 reg &= ~PCI_REV_DESC; 4878 err = pci_write_config_dword(pdev, PCI_DEV_REG2, reg); 4879 if (err) { 4880 dev_err(&pdev->dev, "PCI write config failed\n"); 4881 goto err_out_free_regions; 4882 } 4883 #endif 4884 4885 wol_default = device_may_wakeup(&pdev->dev) ? WAKE_MAGIC : 0; 4886 4887 err = -ENOMEM; 4888 4889 hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:") 4890 + strlen(pci_name(pdev)) + 1, GFP_KERNEL); 4891 if (!hw) 4892 goto err_out_free_regions; 4893 4894 hw->pdev = pdev; 4895 sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev)); 4896 4897 hw->regs = ioremap(pci_resource_start(pdev, 0), 0x4000); 4898 if (!hw->regs) { 4899 dev_err(&pdev->dev, "cannot map device registers\n"); 4900 goto err_out_free_hw; 4901 } 4902 4903 err = sky2_init(hw); 4904 if (err) 4905 goto err_out_iounmap; 4906 4907 /* ring for status responses */ 4908 hw->st_size = hw->ports * roundup_pow_of_two(3*RX_MAX_PENDING + TX_MAX_PENDING); 4909 hw->st_le = dma_alloc_coherent(&pdev->dev, 4910 hw->st_size * sizeof(struct sky2_status_le), 4911 &hw->st_dma, GFP_KERNEL); 4912 if (!hw->st_le) { 4913 err = -ENOMEM; 4914 goto err_out_reset; 4915 } 4916 4917 dev_info(&pdev->dev, "Yukon-2 %s chip revision %d\n", 4918 sky2_name(hw->chip_id, buf1, sizeof(buf1)), hw->chip_rev); 4919 4920 sky2_reset(hw); 4921 4922 dev = sky2_init_netdev(hw, 0, using_dac, wol_default); 4923 if (!dev) { 4924 err = -ENOMEM; 4925 goto err_out_free_pci; 4926 } 4927 4928 if (disable_msi == -1) 4929 disable_msi = !!dmi_check_system(msi_blacklist); 4930 4931 if (!disable_msi && pci_enable_msi(pdev) == 0) { 4932 err = sky2_test_msi(hw); 4933 if (err) { 4934 pci_disable_msi(pdev); 4935 if (err != -EOPNOTSUPP) 4936 goto err_out_free_netdev; 4937 } 4938 } 4939 4940 netif_napi_add(dev, &hw->napi, sky2_poll); 4941 4942 err = register_netdev(dev); 4943 if (err) { 4944 dev_err(&pdev->dev, "cannot register net device\n"); 4945 goto err_out_free_netdev; 4946 } 4947 4948 netif_carrier_off(dev); 4949 4950 sky2_show_addr(dev); 4951 4952 if (hw->ports > 1) { 4953 dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default); 4954 if (!dev1) { 4955 err = -ENOMEM; 4956 goto err_out_unregister; 4957 } 4958 4959 err = register_netdev(dev1); 4960 if (err) { 4961 dev_err(&pdev->dev, "cannot register second net device\n"); 4962 goto err_out_free_dev1; 4963 } 4964 4965 err = sky2_setup_irq(hw, hw->irq_name); 4966 if (err) 4967 goto err_out_unregister_dev1; 4968 4969 sky2_show_addr(dev1); 4970 } 4971 4972 timer_setup(&hw->watchdog_timer, sky2_watchdog, 0); 4973 INIT_WORK(&hw->restart_work, sky2_restart); 4974 4975 pci_set_drvdata(pdev, hw); 4976 pdev->d3hot_delay = 300; 4977 4978 return 0; 4979 4980 err_out_unregister_dev1: 4981 unregister_netdev(dev1); 4982 err_out_free_dev1: 4983 free_netdev(dev1); 4984 err_out_unregister: 4985 unregister_netdev(dev); 4986 err_out_free_netdev: 4987 if (hw->flags & SKY2_HW_USE_MSI) 4988 pci_disable_msi(pdev); 4989 free_netdev(dev); 4990 err_out_free_pci: 4991 dma_free_coherent(&pdev->dev, 4992 hw->st_size * sizeof(struct sky2_status_le), 4993 hw->st_le, hw->st_dma); 4994 err_out_reset: 4995 sky2_write8(hw, B0_CTST, CS_RST_SET); 4996 err_out_iounmap: 4997 iounmap(hw->regs); 4998 err_out_free_hw: 4999 kfree(hw); 5000 err_out_free_regions: 5001 pci_release_regions(pdev); 5002 err_out_disable: 5003 pci_disable_device(pdev); 5004 err_out: 5005 return err; 5006 } 5007 5008 static void sky2_remove(struct pci_dev *pdev) 5009 { 5010 struct sky2_hw *hw = pci_get_drvdata(pdev); 5011 int i; 5012 5013 if (!hw) 5014 return; 5015 5016 timer_shutdown_sync(&hw->watchdog_timer); 5017 cancel_work_sync(&hw->restart_work); 5018 5019 for (i = hw->ports-1; i >= 0; --i) 5020 unregister_netdev(hw->dev[i]); 5021 5022 sky2_write32(hw, B0_IMSK, 0); 5023 sky2_read32(hw, B0_IMSK); 5024 5025 sky2_power_aux(hw); 5026 5027 sky2_write8(hw, B0_CTST, CS_RST_SET); 5028 sky2_read8(hw, B0_CTST); 5029 5030 if (hw->ports > 1) { 5031 napi_disable(&hw->napi); 5032 free_irq(pdev->irq, hw); 5033 } 5034 5035 if (hw->flags & SKY2_HW_USE_MSI) 5036 pci_disable_msi(pdev); 5037 dma_free_coherent(&pdev->dev, 5038 hw->st_size * sizeof(struct sky2_status_le), 5039 hw->st_le, hw->st_dma); 5040 pci_release_regions(pdev); 5041 pci_disable_device(pdev); 5042 5043 for (i = hw->ports-1; i >= 0; --i) 5044 free_netdev(hw->dev[i]); 5045 5046 iounmap(hw->regs); 5047 kfree(hw); 5048 } 5049 5050 static int sky2_suspend(struct device *dev) 5051 { 5052 struct sky2_hw *hw = dev_get_drvdata(dev); 5053 int i; 5054 5055 if (!hw) 5056 return 0; 5057 5058 del_timer_sync(&hw->watchdog_timer); 5059 cancel_work_sync(&hw->restart_work); 5060 5061 rtnl_lock(); 5062 5063 sky2_all_down(hw); 5064 for (i = 0; i < hw->ports; i++) { 5065 struct net_device *dev = hw->dev[i]; 5066 struct sky2_port *sky2 = netdev_priv(dev); 5067 5068 if (sky2->wol) 5069 sky2_wol_init(sky2); 5070 } 5071 5072 sky2_power_aux(hw); 5073 rtnl_unlock(); 5074 5075 return 0; 5076 } 5077 5078 #ifdef CONFIG_PM_SLEEP 5079 static int sky2_resume(struct device *dev) 5080 { 5081 struct pci_dev *pdev = to_pci_dev(dev); 5082 struct sky2_hw *hw = pci_get_drvdata(pdev); 5083 int err; 5084 5085 if (!hw) 5086 return 0; 5087 5088 /* Re-enable all clocks */ 5089 err = pci_write_config_dword(pdev, PCI_DEV_REG3, 0); 5090 if (err) { 5091 dev_err(&pdev->dev, "PCI write config failed\n"); 5092 goto out; 5093 } 5094 5095 rtnl_lock(); 5096 sky2_reset(hw); 5097 sky2_all_up(hw); 5098 rtnl_unlock(); 5099 5100 return 0; 5101 out: 5102 5103 dev_err(&pdev->dev, "resume failed (%d)\n", err); 5104 pci_disable_device(pdev); 5105 return err; 5106 } 5107 5108 static SIMPLE_DEV_PM_OPS(sky2_pm_ops, sky2_suspend, sky2_resume); 5109 #define SKY2_PM_OPS (&sky2_pm_ops) 5110 5111 #else 5112 5113 #define SKY2_PM_OPS NULL 5114 #endif 5115 5116 static void sky2_shutdown(struct pci_dev *pdev) 5117 { 5118 struct sky2_hw *hw = pci_get_drvdata(pdev); 5119 int port; 5120 5121 for (port = 0; port < hw->ports; port++) { 5122 struct net_device *ndev = hw->dev[port]; 5123 5124 rtnl_lock(); 5125 if (netif_running(ndev)) { 5126 dev_close(ndev); 5127 netif_device_detach(ndev); 5128 } 5129 rtnl_unlock(); 5130 } 5131 sky2_suspend(&pdev->dev); 5132 pci_wake_from_d3(pdev, device_may_wakeup(&pdev->dev)); 5133 pci_set_power_state(pdev, PCI_D3hot); 5134 } 5135 5136 static struct pci_driver sky2_driver = { 5137 .name = DRV_NAME, 5138 .id_table = sky2_id_table, 5139 .probe = sky2_probe, 5140 .remove = sky2_remove, 5141 .shutdown = sky2_shutdown, 5142 .driver.pm = SKY2_PM_OPS, 5143 }; 5144 5145 static int __init sky2_init_module(void) 5146 { 5147 pr_info("driver version " DRV_VERSION "\n"); 5148 5149 sky2_debug_init(); 5150 return pci_register_driver(&sky2_driver); 5151 } 5152 5153 static void __exit sky2_cleanup_module(void) 5154 { 5155 pci_unregister_driver(&sky2_driver); 5156 sky2_debug_cleanup(); 5157 } 5158 5159 module_init(sky2_init_module); 5160 module_exit(sky2_cleanup_module); 5161 5162 MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver"); 5163 MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>"); 5164 MODULE_LICENSE("GPL"); 5165 MODULE_VERSION(DRV_VERSION); 5166