xref: /linux/drivers/net/ethernet/marvell/octeon_ep/octep_tx.h (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /* Marvell Octeon EP (EndPoint) Ethernet Driver
3  *
4  * Copyright (C) 2020 Marvell.
5  *
6  */
7 
8 #ifndef _OCTEP_TX_H_
9 #define _OCTEP_TX_H_
10 
11 #define IQ_SEND_OK          0
12 #define IQ_SEND_STOP        1
13 #define IQ_SEND_FAILED     -1
14 
15 #define TX_BUFTYPE_NONE          0
16 #define TX_BUFTYPE_NET           1
17 #define TX_BUFTYPE_NET_SG        2
18 #define NUM_TX_BUFTYPES          3
19 
20 /* Hardware format for Scatter/Gather list
21  *
22  * 63      48|47     32|31     16|15       0
23  * -----------------------------------------
24  * |  Len 0  |  Len 1  |  Len 2  |  Len 3  |
25  * -----------------------------------------
26  * |                Ptr 0                  |
27  * -----------------------------------------
28  * |                Ptr 1                  |
29  * -----------------------------------------
30  * |                Ptr 2                  |
31  * -----------------------------------------
32  * |                Ptr 3                  |
33  * -----------------------------------------
34  */
35 struct octep_tx_sglist_desc {
36 	u16 len[4];
37 	dma_addr_t dma_ptr[4];
38 };
39 
40 static_assert(sizeof(struct octep_tx_sglist_desc) == 40);
41 
42 /* Each Scatter/Gather entry sent to hardwar hold four pointers.
43  * So, number of entries required is (MAX_SKB_FRAGS + 1)/4, where '+1'
44  * is for main skb which also goes as a gather buffer to Octeon hardware.
45  * To allocate sufficient SGLIST entries for a packet with max fragments,
46  * align by adding 3 before calcuating max SGLIST entries per packet.
47  */
48 #define OCTEP_SGLIST_ENTRIES_PER_PKT ((MAX_SKB_FRAGS + 1 + 3) / 4)
49 #define OCTEP_SGLIST_SIZE_PER_PKT \
50 	(OCTEP_SGLIST_ENTRIES_PER_PKT * sizeof(struct octep_tx_sglist_desc))
51 
52 struct octep_tx_buffer {
53 	struct sk_buff *skb;
54 	dma_addr_t dma;
55 	struct octep_tx_sglist_desc *sglist;
56 	dma_addr_t sglist_dma;
57 	u8 gather;
58 };
59 
60 #define OCTEP_IQ_TXBUFF_INFO_SIZE (sizeof(struct octep_tx_buffer))
61 
62 /* Hardware interface Tx statistics */
63 struct octep_iface_tx_stats {
64 	/* Total frames sent on the interface */
65 	u64 pkts;
66 
67 	/* Total octets sent on the interface */
68 	u64 octs;
69 
70 	/* Packets sent to a broadcast DMAC */
71 	u64 bcst;
72 
73 	/* Packets sent to the multicast DMAC */
74 	u64 mcst;
75 
76 	/* Packets dropped due to excessive collisions */
77 	u64 xscol;
78 
79 	/* Packets dropped due to excessive deferral */
80 	u64 xsdef;
81 
82 	/* Packets sent that experienced multiple collisions before successful
83 	 * transmission
84 	 */
85 	u64 mcol;
86 
87 	/* Packets sent that experienced a single collision before successful
88 	 * transmission
89 	 */
90 	u64 scol;
91 
92 	/* Packets sent with an octet count < 64 */
93 	u64 hist_lt64;
94 
95 	/* Packets sent with an octet count == 64 */
96 	u64 hist_eq64;
97 
98 	/* Packets sent with an octet count of 65–127 */
99 	u64 hist_65to127;
100 
101 	/* Packets sent with an octet count of 128–255 */
102 	u64 hist_128to255;
103 
104 	/* Packets sent with an octet count of 256–511 */
105 	u64 hist_256to511;
106 
107 	/* Packets sent with an octet count of 512–1023 */
108 	u64 hist_512to1023;
109 
110 	/* Packets sent with an octet count of 1024-1518 */
111 	u64 hist_1024to1518;
112 
113 	/* Packets sent with an octet count of > 1518 */
114 	u64 hist_gt1518;
115 
116 	/* Packets sent that experienced a transmit underflow and were
117 	 * truncated
118 	 */
119 	u64 undflw;
120 
121 	/* Control/PAUSE packets sent */
122 	u64 ctl;
123 };
124 
125 /* Input Queue statistics. Each input queue has four stats fields. */
126 struct octep_iq_stats {
127 	/* Instructions posted to this queue. */
128 	u64 instr_posted;
129 
130 	/* Instructions copied by hardware for processing. */
131 	u64 instr_completed;
132 
133 	/* Instructions that could not be processed. */
134 	u64 instr_dropped;
135 
136 	/* Bytes sent through this queue. */
137 	u64 bytes_sent;
138 
139 	/* Gather entries sent through this queue. */
140 	u64 sgentry_sent;
141 
142 	/* Number of transmit failures due to TX_BUSY */
143 	u64 tx_busy;
144 
145 	/* Number of times the queue is restarted */
146 	u64 restart_cnt;
147 };
148 
149 /* The instruction (input) queue.
150  * The input queue is used to post raw (instruction) mode data or packet
151  * data to Octeon device from the host. Each input queue (up to 4) for
152  * a Octeon device has one such structure to represent it.
153  */
154 struct octep_iq {
155 	u32 q_no;
156 
157 	struct octep_device *octep_dev;
158 	struct net_device *netdev;
159 	struct device *dev;
160 	struct netdev_queue *netdev_q;
161 
162 	/* Index in input ring where driver should write the next packet */
163 	u16 host_write_index;
164 
165 	/* Index in input ring where Octeon is expected to read next packet */
166 	u16 octep_read_index;
167 
168 	/* This index aids in finding the window in the queue where Octeon
169 	 * has read the commands.
170 	 */
171 	u16 flush_index;
172 
173 	/* Statistics for this input queue. */
174 	struct octep_iq_stats stats;
175 
176 	/* Pointer to the Virtual Base addr of the input ring. */
177 	struct octep_tx_desc_hw *desc_ring;
178 
179 	/* DMA mapped base address of the input descriptor ring. */
180 	dma_addr_t desc_ring_dma;
181 
182 	/* Info of Tx buffers pending completion. */
183 	struct octep_tx_buffer *buff_info;
184 
185 	/* Base pointer to Scatter/Gather lists for all ring descriptors. */
186 	struct octep_tx_sglist_desc *sglist;
187 
188 	/* DMA mapped addr of Scatter Gather Lists */
189 	dma_addr_t sglist_dma;
190 
191 	/* Octeon doorbell register for the ring. */
192 	u8 __iomem *doorbell_reg;
193 
194 	/* Octeon instruction count register for this ring. */
195 	u8 __iomem *inst_cnt_reg;
196 
197 	/* interrupt level register for this ring */
198 	u8 __iomem *intr_lvl_reg;
199 
200 	/* Maximum no. of instructions in this queue. */
201 	u32 max_count;
202 	u32 ring_size_mask;
203 
204 	u32 pkt_in_done;
205 	u32 pkts_processed;
206 
207 	u32 status;
208 
209 	/* Number of instructions pending to be posted to Octeon. */
210 	u32 fill_cnt;
211 
212 	/* The max. number of instructions that can be held pending by the
213 	 * driver before ringing doorbell.
214 	 */
215 	u32 fill_threshold;
216 };
217 
218 /* Hardware Tx Instruction Header */
219 struct octep_instr_hdr {
220 	/* Data Len */
221 	u64 tlen:16;
222 
223 	/* Reserved */
224 	u64 rsvd:20;
225 
226 	/* PKIND for SDP */
227 	u64 pkind:6;
228 
229 	/* Front Data size */
230 	u64 fsz:6;
231 
232 	/* No. of entries in gather list */
233 	u64 gsz:14;
234 
235 	/* Gather indicator 1=gather*/
236 	u64 gather:1;
237 
238 	/* Reserved3 */
239 	u64 reserved3:1;
240 };
241 
242 static_assert(sizeof(struct octep_instr_hdr) == 8);
243 
244 /* Tx offload flags */
245 #define OCTEP_TX_OFFLOAD_VLAN_INSERT   BIT(0)
246 #define OCTEP_TX_OFFLOAD_IPV4_CKSUM    BIT(1)
247 #define OCTEP_TX_OFFLOAD_UDP_CKSUM     BIT(2)
248 #define OCTEP_TX_OFFLOAD_TCP_CKSUM     BIT(3)
249 #define OCTEP_TX_OFFLOAD_SCTP_CKSUM    BIT(4)
250 #define OCTEP_TX_OFFLOAD_TCP_TSO       BIT(5)
251 #define OCTEP_TX_OFFLOAD_UDP_TSO       BIT(6)
252 
253 #define OCTEP_TX_OFFLOAD_CKSUM         (OCTEP_TX_OFFLOAD_IPV4_CKSUM | \
254 					OCTEP_TX_OFFLOAD_UDP_CKSUM | \
255 					OCTEP_TX_OFFLOAD_TCP_CKSUM)
256 
257 #define OCTEP_TX_OFFLOAD_TSO           (OCTEP_TX_OFFLOAD_TCP_TSO | \
258 					OCTEP_TX_OFFLOAD_UDP_TSO)
259 
260 #define OCTEP_TX_IP_CSUM(flags)		((flags) & \
261 					 (OCTEP_TX_OFFLOAD_IPV4_CKSUM | \
262 					  OCTEP_TX_OFFLOAD_TCP_CKSUM | \
263 					  OCTEP_TX_OFFLOAD_UDP_CKSUM))
264 
265 #define OCTEP_TX_TSO(flags)		((flags) & \
266 					 (OCTEP_TX_OFFLOAD_TCP_TSO | \
267 					  OCTEP_TX_OFFLOAD_UDP_TSO))
268 
269 struct tx_mdata {
270 
271 	/* offload flags */
272 	u16 ol_flags;
273 
274 	/* gso size */
275 	u16 gso_size;
276 
277 	/* gso flags */
278 	u16 gso_segs;
279 
280 	/* reserved */
281 	u16 rsvd1;
282 
283 	/* reserved */
284 	u64 rsvd2;
285 };
286 
287 static_assert(sizeof(struct tx_mdata) == 16);
288 
289 /* 64-byte Tx instruction format.
290  * Format of instruction for a 64-byte mode input queue.
291  *
292  * only first 16-bytes (dptr and ih) are mandatory; rest are optional
293  * and filled by the driver based on firmware/hardware capabilities.
294  * These optional headers together called Front Data and its size is
295  * described by ih->fsz.
296  */
297 struct octep_tx_desc_hw {
298 	/* Pointer where the input data is available. */
299 	u64 dptr;
300 
301 	/* Instruction Header. */
302 	union {
303 		struct octep_instr_hdr ih;
304 		u64 ih64;
305 	};
306 	union  {
307 		u64 txm64[2];
308 		struct tx_mdata txm;
309 	};
310 	/* Additional headers available in a 64-byte instruction. */
311 	u64 exthdr[4];
312 };
313 
314 static_assert(sizeof(struct octep_tx_desc_hw) == 64);
315 
316 #define OCTEP_IQ_DESC_SIZE (sizeof(struct octep_tx_desc_hw))
317 #endif /* _OCTEP_TX_H_ */
318