1# 2# Marvell device configuration 3# 4 5config NET_VENDOR_MARVELL 6 bool "Marvell devices" 7 default y 8 depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET || COMPILE_TEST 9 ---help--- 10 If you have a network (Ethernet) card belonging to this class, say Y. 11 12 Note that the answer to this question doesn't directly affect the 13 kernel: saying N will just cause the configurator to skip all 14 the questions about Marvell devices. If you say Y, you will be 15 asked for your specific card in the following questions. 16 17if NET_VENDOR_MARVELL 18 19config MV643XX_ETH 20 tristate "Marvell Discovery (643XX) and Orion ethernet support" 21 depends on MV64X60 || PPC32 || PLAT_ORION || COMPILE_TEST 22 depends on INET 23 select PHYLIB 24 select MVMDIO 25 ---help--- 26 This driver supports the gigabit ethernet MACs in the 27 Marvell Discovery PPC/MIPS chipset family (MV643XX) and 28 in the Marvell Orion ARM SoC family. 29 30 Some boards that use the Discovery chipset are the Momenco 31 Ocelot C and Jaguar ATX and Pegasos II. 32 33config MVMDIO 34 tristate "Marvell MDIO interface support" 35 depends on HAS_IOMEM 36 select PHYLIB 37 ---help--- 38 This driver supports the MDIO interface found in the network 39 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x, 40 Dove, Armada 370 and Armada XP). 41 42 This driver is used by the MV643XX_ETH and MVNETA drivers. 43 44config MVNETA_BM_ENABLE 45 tristate "Marvell Armada 38x/XP network interface BM support" 46 depends on MVNETA 47 depends on !64BIT 48 ---help--- 49 This driver supports auxiliary block of the network 50 interface units in the Marvell ARMADA XP and ARMADA 38x SoC 51 family, which is called buffer manager. 52 53 This driver, when enabled, strictly cooperates with mvneta 54 driver and is common for all network ports of the devices, 55 even for Armada 370 SoC, which doesn't support hardware 56 buffer management. 57 58config MVNETA 59 tristate "Marvell Armada 370/38x/XP/37xx network interface support" 60 depends on ARCH_MVEBU || COMPILE_TEST 61 select MVMDIO 62 select PHYLINK 63 ---help--- 64 This driver supports the network interface units in the 65 Marvell ARMADA XP, ARMADA 370, ARMADA 38x and 66 ARMADA 37xx SoC family. 67 68 Note that this driver is distinct from the mv643xx_eth 69 driver, which should be used for the older Marvell SoCs 70 (Dove, Orion, Discovery, Kirkwood). 71 72config MVNETA_BM 73 tristate 74 depends on !64BIT 75 default y if MVNETA=y && MVNETA_BM_ENABLE!=n 76 default MVNETA_BM_ENABLE 77 select HWBM 78 select GENERIC_ALLOCATOR 79 help 80 MVNETA_BM must not be 'm' if MVNETA=y, so this symbol ensures 81 that all dependencies are met. 82 83config MVPP2 84 tristate "Marvell Armada 375/7K/8K network interface support" 85 depends on ARCH_MVEBU || COMPILE_TEST 86 select MVMDIO 87 select PHYLINK 88 ---help--- 89 This driver supports the network interface units in the 90 Marvell ARMADA 375, 7K and 8K SoCs. 91 92config PXA168_ETH 93 tristate "Marvell pxa168 ethernet support" 94 depends on HAS_IOMEM 95 depends on CPU_PXA168 || ARCH_BERLIN || COMPILE_TEST 96 select PHYLIB 97 ---help--- 98 This driver supports the pxa168 Ethernet ports. 99 100 To compile this driver as a module, choose M here. The module 101 will be called pxa168_eth. 102 103config SKGE 104 tristate "Marvell Yukon Gigabit Ethernet support" 105 depends on PCI 106 select CRC32 107 ---help--- 108 This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx 109 and related Gigabit Ethernet adapters. It is a new smaller driver 110 with better performance and more complete ethtool support. 111 112 It does not support the link failover and network management 113 features that "portable" vendor supplied sk98lin driver does. 114 115 This driver supports adapters based on the original Yukon chipset: 116 Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, 117 Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872. 118 119 It does not support the newer Yukon2 chipset: a separate driver, 120 sky2, is provided for these adapters. 121 122 To compile this driver as a module, choose M here: the module 123 will be called skge. This is recommended. 124 125config SKGE_DEBUG 126 bool "Debugging interface" 127 depends on SKGE && DEBUG_FS 128 ---help--- 129 This option adds the ability to dump driver state for debugging. 130 The file /sys/kernel/debug/skge/ethX displays the state of the internal 131 transmit and receive rings. 132 133 If unsure, say N. 134 135config SKGE_GENESIS 136 bool "Support for older SysKonnect Genesis boards" 137 depends on SKGE 138 ---help--- 139 This enables support for the older and uncommon SysKonnect Genesis 140 chips, which support MII via an external transceiver, instead of 141 an internal one. Disabling this option will save some memory 142 by making code smaller. If unsure say Y. 143 144config SKY2 145 tristate "Marvell Yukon 2 support" 146 depends on PCI 147 select CRC32 148 ---help--- 149 This driver supports Gigabit Ethernet adapters based on the 150 Marvell Yukon 2 chipset: 151 Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ 152 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21 153 154 There is companion driver for the older Marvell Yukon and 155 SysKonnect Genesis based adapters: skge. 156 157 To compile this driver as a module, choose M here: the module 158 will be called sky2. This is recommended. 159 160config SKY2_DEBUG 161 bool "Debugging interface" 162 depends on SKY2 && DEBUG_FS 163 ---help--- 164 This option adds the ability to dump driver state for debugging. 165 The file /sys/kernel/debug/sky2/ethX displays the state of the internal 166 transmit and receive rings. 167 168 If unsure, say N. 169 170endif # NET_VENDOR_MARVELL 171