1# 2# Marvell device configuration 3# 4 5config NET_VENDOR_MARVELL 6 bool "Marvell devices" 7 default y 8 depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET 9 ---help--- 10 If you have a network (Ethernet) card belonging to this class, say Y 11 and read the Ethernet-HOWTO, available from 12 <http://www.tldp.org/docs.html#howto>. 13 14 Note that the answer to this question doesn't directly affect the 15 kernel: saying N will just cause the configurator to skip all 16 the questions about Marvell devices. If you say Y, you will be 17 asked for your specific card in the following questions. 18 19if NET_VENDOR_MARVELL 20 21config MV643XX_ETH 22 tristate "Marvell Discovery (643XX) and Orion ethernet support" 23 depends on (MV64X60 || PPC32 || PLAT_ORION) && INET 24 select INET_LRO 25 select PHYLIB 26 ---help--- 27 This driver supports the gigabit ethernet MACs in the 28 Marvell Discovery PPC/MIPS chipset family (MV643XX) and 29 in the Marvell Orion ARM SoC family. 30 31 Some boards that use the Discovery chipset are the Momenco 32 Ocelot C and Jaguar ATX and Pegasos II. 33 34config MVMDIO 35 tristate "Marvell MDIO interface support" 36 ---help--- 37 This driver supports the MDIO interface found in the network 38 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x, 39 Dove, Armada 370 and Armada XP). 40 41 For now, this driver is only needed for the MVNETA driver 42 (used on Armada 370 and XP), but it could be used in the 43 future by the MV643XX_ETH driver. 44 45config MVNETA 46 tristate "Marvell Armada 370/XP network interface support" 47 depends on MACH_ARMADA_370_XP 48 select PHYLIB 49 select MVMDIO 50 ---help--- 51 This driver supports the network interface units in the 52 Marvell ARMADA XP and ARMADA 370 SoC family. 53 54 Note that this driver is distinct from the mv643xx_eth 55 driver, which should be used for the older Marvell SoCs 56 (Dove, Orion, Discovery, Kirkwood). 57 58config PXA168_ETH 59 tristate "Marvell pxa168 ethernet support" 60 depends on CPU_PXA168 61 select PHYLIB 62 ---help--- 63 This driver supports the pxa168 Ethernet ports. 64 65 To compile this driver as a module, choose M here. The module 66 will be called pxa168_eth. 67 68config SKGE 69 tristate "Marvell Yukon Gigabit Ethernet support" 70 depends on PCI 71 select CRC32 72 ---help--- 73 This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx 74 and related Gigabit Ethernet adapters. It is a new smaller driver 75 with better performance and more complete ethtool support. 76 77 It does not support the link failover and network management 78 features that "portable" vendor supplied sk98lin driver does. 79 80 This driver supports adapters based on the original Yukon chipset: 81 Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, 82 Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872. 83 84 It does not support the newer Yukon2 chipset: a separate driver, 85 sky2, is provided for these adapters. 86 87 To compile this driver as a module, choose M here: the module 88 will be called skge. This is recommended. 89 90config SKGE_DEBUG 91 bool "Debugging interface" 92 depends on SKGE && DEBUG_FS 93 ---help--- 94 This option adds the ability to dump driver state for debugging. 95 The file /sys/kernel/debug/skge/ethX displays the state of the internal 96 transmit and receive rings. 97 98 If unsure, say N. 99 100config SKGE_GENESIS 101 bool "Support for older SysKonnect Genesis boards" 102 depends on SKGE 103 ---help--- 104 This enables support for the older and uncommon SysKonnect Genesis 105 chips, which support MII via an external transceiver, instead of 106 an internal one. Disabling this option will save some memory 107 by making code smaller. If unsure say Y. 108 109config SKY2 110 tristate "Marvell Yukon 2 support" 111 depends on PCI 112 select CRC32 113 ---help--- 114 This driver supports Gigabit Ethernet adapters based on the 115 Marvell Yukon 2 chipset: 116 Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ 117 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21 118 119 There is companion driver for the older Marvell Yukon and 120 SysKonnect Genesis based adapters: skge. 121 122 To compile this driver as a module, choose M here: the module 123 will be called sky2. This is recommended. 124 125config SKY2_DEBUG 126 bool "Debugging interface" 127 depends on SKY2 && DEBUG_FS 128 ---help--- 129 This option adds the ability to dump driver state for debugging. 130 The file /sys/kernel/debug/sky2/ethX displays the state of the internal 131 transmit and receive rings. 132 133 If unsure, say N. 134 135endif # NET_VENDOR_MARVELL 136