1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Marvell device configuration 4# 5 6config NET_VENDOR_MARVELL 7 bool "Marvell devices" 8 default y 9 depends on PCI || CPU_PXA168 || PPC32 || PLAT_ORION || INET || COMPILE_TEST 10 help 11 If you have a network (Ethernet) card belonging to this class, say Y. 12 13 Note that the answer to this question doesn't directly affect the 14 kernel: saying N will just cause the configurator to skip all 15 the questions about Marvell devices. If you say Y, you will be 16 asked for your specific card in the following questions. 17 18if NET_VENDOR_MARVELL 19 20config MV643XX_ETH 21 tristate "Marvell Discovery (643XX) and Orion ethernet support" 22 depends on PPC32 || PLAT_ORION || COMPILE_TEST 23 depends on INET 24 select PHYLIB 25 select MVMDIO 26 help 27 This driver supports the gigabit ethernet MACs in the 28 Marvell Discovery PPC/MIPS chipset family (MV643XX) and 29 in the Marvell Orion ARM SoC family. 30 31 Some boards that use the Discovery chipset are the Momenco 32 Ocelot C and Jaguar ATX and Pegasos II. 33 34config MVMDIO 35 tristate "Marvell MDIO interface support" 36 depends on HAS_IOMEM 37 select MDIO_DEVRES 38 select PHYLIB 39 help 40 This driver supports the MDIO interface found in the network 41 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x, 42 Dove, Armada 370 and Armada XP). 43 44 This driver is used by the MV643XX_ETH and MVNETA drivers. 45 46config MVNETA_BM_ENABLE 47 tristate "Marvell Armada 38x/XP network interface BM support" 48 depends on MVNETA 49 depends on !64BIT 50 help 51 This driver supports auxiliary block of the network 52 interface units in the Marvell ARMADA XP and ARMADA 38x SoC 53 family, which is called buffer manager. 54 55 This driver, when enabled, strictly cooperates with mvneta 56 driver and is common for all network ports of the devices, 57 even for Armada 370 SoC, which doesn't support hardware 58 buffer management. 59 60config MVNETA 61 tristate "Marvell Armada 370/38x/XP/37xx network interface support" 62 depends on ARCH_MVEBU || COMPILE_TEST 63 select MVMDIO 64 select PHYLINK 65 select PAGE_POOL 66 select PAGE_POOL_STATS 67 help 68 This driver supports the network interface units in the 69 Marvell ARMADA XP, ARMADA 370, ARMADA 38x and 70 ARMADA 37xx SoC family. 71 72 Note that this driver is distinct from the mv643xx_eth 73 driver, which should be used for the older Marvell SoCs 74 (Dove, Orion, Discovery, Kirkwood). 75 76config MVNETA_BM 77 tristate 78 depends on !64BIT 79 default y if MVNETA=y && MVNETA_BM_ENABLE!=n 80 default MVNETA_BM_ENABLE 81 select HWBM 82 select GENERIC_ALLOCATOR 83 help 84 MVNETA_BM must not be 'm' if MVNETA=y, so this symbol ensures 85 that all dependencies are met. 86 87config MVPP2 88 tristate "Marvell Armada 375/7K/8K network interface support" 89 depends on ARCH_MVEBU || COMPILE_TEST 90 select MVMDIO 91 select PHYLINK 92 select PAGE_POOL 93 help 94 This driver supports the network interface units in the 95 Marvell ARMADA 375, 7K and 8K SoCs. 96 97config MVPP2_PTP 98 bool "Marvell Armada 8K Enable PTP support" 99 depends on (PTP_1588_CLOCK = y && MVPP2 = y) || \ 100 (PTP_1588_CLOCK && MVPP2 = m) 101 102config PXA168_ETH 103 tristate "Marvell pxa168 ethernet support" 104 depends on HAS_IOMEM 105 depends on CPU_PXA168 || ARCH_BERLIN || COMPILE_TEST 106 select PHYLIB 107 help 108 This driver supports the pxa168 Ethernet ports. 109 110 To compile this driver as a module, choose M here. The module 111 will be called pxa168_eth. 112 113config SKGE 114 tristate "Marvell Yukon Gigabit Ethernet support" 115 depends on PCI 116 select CRC32 117 help 118 This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx 119 and related Gigabit Ethernet adapters. It is a new smaller driver 120 with better performance and more complete ethtool support. 121 122 It does not support the link failover and network management 123 features that "portable" vendor supplied sk98lin driver does. 124 125 This driver supports adapters based on the original Yukon chipset: 126 Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, 127 Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872. 128 129 It does not support the newer Yukon2 chipset: a separate driver, 130 sky2, is provided for these adapters. 131 132 To compile this driver as a module, choose M here: the module 133 will be called skge. This is recommended. 134 135config SKGE_DEBUG 136 bool "Debugging interface" 137 depends on SKGE && DEBUG_FS 138 help 139 This option adds the ability to dump driver state for debugging. 140 The file /sys/kernel/debug/skge/ethX displays the state of the internal 141 transmit and receive rings. 142 143 If unsure, say N. 144 145config SKGE_GENESIS 146 bool "Support for older SysKonnect Genesis boards" 147 depends on SKGE 148 help 149 This enables support for the older and uncommon SysKonnect Genesis 150 chips, which support MII via an external transceiver, instead of 151 an internal one. Disabling this option will save some memory 152 by making code smaller. If unsure say Y. 153 154config SKY2 155 tristate "Marvell Yukon 2 support" 156 depends on PCI 157 select CRC32 158 help 159 This driver supports Gigabit Ethernet adapters based on the 160 Marvell Yukon 2 chipset: 161 Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ 162 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21 163 164 There is companion driver for the older Marvell Yukon and 165 SysKonnect Genesis based adapters: skge. 166 167 To compile this driver as a module, choose M here: the module 168 will be called sky2. This is recommended. 169 170config SKY2_DEBUG 171 bool "Debugging interface" 172 depends on SKY2 && DEBUG_FS 173 help 174 This option adds the ability to dump driver state for debugging. 175 The file /sys/kernel/debug/sky2/ethX displays the state of the internal 176 transmit and receive rings. 177 178 If unsure, say N. 179 180 181source "drivers/net/ethernet/marvell/octeontx2/Kconfig" 182source "drivers/net/ethernet/marvell/octeon_ep/Kconfig" 183source "drivers/net/ethernet/marvell/octeon_ep_vf/Kconfig" 184source "drivers/net/ethernet/marvell/prestera/Kconfig" 185 186endif # NET_VENDOR_MARVELL 187