1# 2# Marvell device configuration 3# 4 5config NET_VENDOR_MARVELL 6 bool "Marvell devices" 7 default y 8 depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET 9 ---help--- 10 If you have a network (Ethernet) card belonging to this class, say Y 11 and read the Ethernet-HOWTO, available from 12 <http://www.tldp.org/docs.html#howto>. 13 14 Note that the answer to this question doesn't directly affect the 15 kernel: saying N will just cause the configurator to skip all 16 the questions about Marvell devices. If you say Y, you will be 17 asked for your specific card in the following questions. 18 19if NET_VENDOR_MARVELL 20 21config MV643XX_ETH 22 tristate "Marvell Discovery (643XX) and Orion ethernet support" 23 depends on (MV64X60 || PPC32 || PLAT_ORION) && INET 24 select INET_LRO 25 select PHYLIB 26 ---help--- 27 This driver supports the gigabit ethernet MACs in the 28 Marvell Discovery PPC/MIPS chipset family (MV643XX) and 29 in the Marvell Orion ARM SoC family. 30 31 Some boards that use the Discovery chipset are the Momenco 32 Ocelot C and Jaguar ATX and Pegasos II. 33 34config PXA168_ETH 35 tristate "Marvell pxa168 ethernet support" 36 depends on CPU_PXA168 37 select PHYLIB 38 ---help--- 39 This driver supports the pxa168 Ethernet ports. 40 41 To compile this driver as a module, choose M here. The module 42 will be called pxa168_eth. 43 44config SKGE 45 tristate "Marvell Yukon Gigabit Ethernet support" 46 depends on PCI 47 select CRC32 48 ---help--- 49 This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx 50 and related Gigabit Ethernet adapters. It is a new smaller driver 51 with better performance and more complete ethtool support. 52 53 It does not support the link failover and network management 54 features that "portable" vendor supplied sk98lin driver does. 55 56 This driver supports adapters based on the original Yukon chipset: 57 Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, 58 Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872. 59 60 It does not support the newer Yukon2 chipset: a separate driver, 61 sky2, is provided for these adapters. 62 63 To compile this driver as a module, choose M here: the module 64 will be called skge. This is recommended. 65 66config SKGE_DEBUG 67 bool "Debugging interface" 68 depends on SKGE && DEBUG_FS 69 ---help--- 70 This option adds the ability to dump driver state for debugging. 71 The file /sys/kernel/debug/skge/ethX displays the state of the internal 72 transmit and receive rings. 73 74 If unsure, say N. 75 76config SKGE_GENESIS 77 bool "Support for older SysKonnect Genesis boards" 78 depends on SKGE 79 ---help--- 80 This enables support for the older and uncommon SysKonnect Genesis 81 chips, which support MII via an external transceiver, instead of 82 an internal one. Disabling this option will save some memory 83 by making code smaller. If unsure say Y. 84 85config SKY2 86 tristate "Marvell Yukon 2 support" 87 depends on PCI 88 select CRC32 89 ---help--- 90 This driver supports Gigabit Ethernet adapters based on the 91 Marvell Yukon 2 chipset: 92 Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ 93 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21 94 95 There is companion driver for the older Marvell Yukon and 96 SysKonnect Genesis based adapters: skge. 97 98 To compile this driver as a module, choose M here: the module 99 will be called sky2. This is recommended. 100 101config SKY2_DEBUG 102 bool "Debugging interface" 103 depends on SKY2 && DEBUG_FS 104 ---help--- 105 This option adds the ability to dump driver state for debugging. 106 The file /sys/kernel/debug/sky2/ethX displays the state of the internal 107 transmit and receive rings. 108 109 If unsure, say N. 110 111endif # NET_VENDOR_MARVELL 112