1 /******************************************************************************* 2 3 Intel 10 Gigabit PCI Express Linux driver 4 Copyright(c) 1999 - 2015 Intel Corporation. 5 6 This program is free software; you can redistribute it and/or modify it 7 under the terms and conditions of the GNU General Public License, 8 version 2, as published by the Free Software Foundation. 9 10 This program is distributed in the hope it will be useful, but WITHOUT 11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 13 more details. 14 15 You should have received a copy of the GNU General Public License along with 16 this program; if not, write to the Free Software Foundation, Inc., 17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 18 19 The full GNU General Public License is included in this distribution in 20 the file called "COPYING". 21 22 Contact Information: 23 Linux NICS <linux.nics@intel.com> 24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> 25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 26 27 *******************************************************************************/ 28 29 #include <linux/pci.h> 30 #include <linux/delay.h> 31 #include <linux/sched.h> 32 33 #include "ixgbe.h" 34 #include "ixgbe_phy.h" 35 #include "ixgbe_mbx.h" 36 37 #define IXGBE_82599_MAX_TX_QUEUES 128 38 #define IXGBE_82599_MAX_RX_QUEUES 128 39 #define IXGBE_82599_RAR_ENTRIES 128 40 #define IXGBE_82599_MC_TBL_SIZE 128 41 #define IXGBE_82599_VFT_TBL_SIZE 128 42 #define IXGBE_82599_RX_PB_SIZE 512 43 44 static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); 45 static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); 46 static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); 47 static void 48 ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *, ixgbe_link_speed); 49 static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, 50 ixgbe_link_speed speed, 51 bool autoneg_wait_to_complete); 52 static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw); 53 static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, 54 bool autoneg_wait_to_complete); 55 static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, 56 ixgbe_link_speed speed, 57 bool autoneg_wait_to_complete); 58 static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, 59 ixgbe_link_speed speed, 60 bool autoneg_wait_to_complete); 61 static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); 62 static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, 63 u8 dev_addr, u8 *data); 64 static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, 65 u8 dev_addr, u8 data); 66 static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw); 67 static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw); 68 69 bool ixgbe_mng_enabled(struct ixgbe_hw *hw) 70 { 71 u32 fwsm, manc, factps; 72 73 fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM(hw)); 74 if ((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT) 75 return false; 76 77 manc = IXGBE_READ_REG(hw, IXGBE_MANC); 78 if (!(manc & IXGBE_MANC_RCV_TCO_EN)) 79 return false; 80 81 factps = IXGBE_READ_REG(hw, IXGBE_FACTPS(hw)); 82 if (factps & IXGBE_FACTPS_MNGCG) 83 return false; 84 85 return true; 86 } 87 88 static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) 89 { 90 struct ixgbe_mac_info *mac = &hw->mac; 91 92 /* enable the laser control functions for SFP+ fiber 93 * and MNG not enabled 94 */ 95 if ((mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) && 96 !ixgbe_mng_enabled(hw)) { 97 mac->ops.disable_tx_laser = 98 &ixgbe_disable_tx_laser_multispeed_fiber; 99 mac->ops.enable_tx_laser = 100 &ixgbe_enable_tx_laser_multispeed_fiber; 101 mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber; 102 } else { 103 mac->ops.disable_tx_laser = NULL; 104 mac->ops.enable_tx_laser = NULL; 105 mac->ops.flap_tx_laser = NULL; 106 } 107 108 if (hw->phy.multispeed_fiber) { 109 /* Set up dual speed SFP+ support */ 110 mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber; 111 mac->ops.setup_mac_link = ixgbe_setup_mac_link_82599; 112 mac->ops.set_rate_select_speed = 113 ixgbe_set_hard_rate_select_speed; 114 } else { 115 if ((mac->ops.get_media_type(hw) == 116 ixgbe_media_type_backplane) && 117 (hw->phy.smart_speed == ixgbe_smart_speed_auto || 118 hw->phy.smart_speed == ixgbe_smart_speed_on) && 119 !ixgbe_verify_lesm_fw_enabled_82599(hw)) 120 mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed; 121 else 122 mac->ops.setup_link = &ixgbe_setup_mac_link_82599; 123 } 124 } 125 126 static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) 127 { 128 s32 ret_val; 129 u16 list_offset, data_offset, data_value; 130 131 if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { 132 ixgbe_init_mac_link_ops_82599(hw); 133 134 hw->phy.ops.reset = NULL; 135 136 ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, 137 &data_offset); 138 if (ret_val) 139 return ret_val; 140 141 /* PHY config will finish before releasing the semaphore */ 142 ret_val = hw->mac.ops.acquire_swfw_sync(hw, 143 IXGBE_GSSR_MAC_CSR_SM); 144 if (ret_val) 145 return IXGBE_ERR_SWFW_SYNC; 146 147 if (hw->eeprom.ops.read(hw, ++data_offset, &data_value)) 148 goto setup_sfp_err; 149 while (data_value != 0xffff) { 150 IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value); 151 IXGBE_WRITE_FLUSH(hw); 152 if (hw->eeprom.ops.read(hw, ++data_offset, &data_value)) 153 goto setup_sfp_err; 154 } 155 156 /* Release the semaphore */ 157 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); 158 /* 159 * Delay obtaining semaphore again to allow FW access, 160 * semaphore_delay is in ms usleep_range needs us. 161 */ 162 usleep_range(hw->eeprom.semaphore_delay * 1000, 163 hw->eeprom.semaphore_delay * 2000); 164 165 /* Restart DSP and set SFI mode */ 166 ret_val = hw->mac.ops.prot_autoc_write(hw, 167 hw->mac.orig_autoc | IXGBE_AUTOC_LMS_10G_SERIAL, 168 false); 169 170 if (ret_val) { 171 hw_dbg(hw, " sfp module setup not complete\n"); 172 return IXGBE_ERR_SFP_SETUP_NOT_COMPLETE; 173 } 174 } 175 176 return 0; 177 178 setup_sfp_err: 179 /* Release the semaphore */ 180 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); 181 /* Delay obtaining semaphore again to allow FW access, 182 * semaphore_delay is in ms usleep_range needs us. 183 */ 184 usleep_range(hw->eeprom.semaphore_delay * 1000, 185 hw->eeprom.semaphore_delay * 2000); 186 hw_err(hw, "eeprom read at offset %d failed\n", data_offset); 187 return IXGBE_ERR_SFP_SETUP_NOT_COMPLETE; 188 } 189 190 /** 191 * prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read 192 * @hw: pointer to hardware structure 193 * @locked: Return the if we locked for this read. 194 * @reg_val: Value we read from AUTOC 195 * 196 * For this part (82599) we need to wrap read-modify-writes with a possible 197 * FW/SW lock. It is assumed this lock will be freed with the next 198 * prot_autoc_write_82599(). Note, that locked can only be true in cases 199 * where this function doesn't return an error. 200 **/ 201 static s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, 202 u32 *reg_val) 203 { 204 s32 ret_val; 205 206 *locked = false; 207 /* If LESM is on then we need to hold the SW/FW semaphore. */ 208 if (ixgbe_verify_lesm_fw_enabled_82599(hw)) { 209 ret_val = hw->mac.ops.acquire_swfw_sync(hw, 210 IXGBE_GSSR_MAC_CSR_SM); 211 if (ret_val) 212 return IXGBE_ERR_SWFW_SYNC; 213 214 *locked = true; 215 } 216 217 *reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC); 218 return 0; 219 } 220 221 /** 222 * prot_autoc_write_82599 - Hides MAC differences needed for AUTOC write 223 * @hw: pointer to hardware structure 224 * @reg_val: value to write to AUTOC 225 * @locked: bool to indicate whether the SW/FW lock was already taken by 226 * previous proc_autoc_read_82599. 227 * 228 * This part (82599) may need to hold a the SW/FW lock around all writes to 229 * AUTOC. Likewise after a write we need to do a pipeline reset. 230 **/ 231 static s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked) 232 { 233 s32 ret_val = 0; 234 235 /* Blocked by MNG FW so bail */ 236 if (ixgbe_check_reset_blocked(hw)) 237 goto out; 238 239 /* We only need to get the lock if: 240 * - We didn't do it already (in the read part of a read-modify-write) 241 * - LESM is enabled. 242 */ 243 if (!locked && ixgbe_verify_lesm_fw_enabled_82599(hw)) { 244 ret_val = hw->mac.ops.acquire_swfw_sync(hw, 245 IXGBE_GSSR_MAC_CSR_SM); 246 if (ret_val) 247 return IXGBE_ERR_SWFW_SYNC; 248 249 locked = true; 250 } 251 252 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); 253 ret_val = ixgbe_reset_pipeline_82599(hw); 254 255 out: 256 /* Free the SW/FW semaphore as we either grabbed it here or 257 * already had it when this function was called. 258 */ 259 if (locked) 260 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); 261 262 return ret_val; 263 } 264 265 static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw) 266 { 267 struct ixgbe_mac_info *mac = &hw->mac; 268 269 ixgbe_init_mac_link_ops_82599(hw); 270 271 mac->mcft_size = IXGBE_82599_MC_TBL_SIZE; 272 mac->vft_size = IXGBE_82599_VFT_TBL_SIZE; 273 mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES; 274 mac->rx_pb_size = IXGBE_82599_RX_PB_SIZE; 275 mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES; 276 mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES; 277 mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); 278 279 return 0; 280 } 281 282 /** 283 * ixgbe_init_phy_ops_82599 - PHY/SFP specific init 284 * @hw: pointer to hardware structure 285 * 286 * Initialize any function pointers that were not able to be 287 * set during get_invariants because the PHY/SFP type was 288 * not known. Perform the SFP init if necessary. 289 * 290 **/ 291 static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) 292 { 293 struct ixgbe_mac_info *mac = &hw->mac; 294 struct ixgbe_phy_info *phy = &hw->phy; 295 s32 ret_val; 296 u32 esdp; 297 298 if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) { 299 /* Store flag indicating I2C bus access control unit. */ 300 hw->phy.qsfp_shared_i2c_bus = true; 301 302 /* Initialize access to QSFP+ I2C bus */ 303 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 304 esdp |= IXGBE_ESDP_SDP0_DIR; 305 esdp &= ~IXGBE_ESDP_SDP1_DIR; 306 esdp &= ~IXGBE_ESDP_SDP0; 307 esdp &= ~IXGBE_ESDP_SDP0_NATIVE; 308 esdp &= ~IXGBE_ESDP_SDP1_NATIVE; 309 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); 310 IXGBE_WRITE_FLUSH(hw); 311 312 phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_82599; 313 phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_82599; 314 } 315 316 /* Identify the PHY or SFP module */ 317 ret_val = phy->ops.identify(hw); 318 319 /* Setup function pointers based on detected SFP module and speeds */ 320 ixgbe_init_mac_link_ops_82599(hw); 321 322 /* If copper media, overwrite with copper function pointers */ 323 if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { 324 mac->ops.setup_link = &ixgbe_setup_copper_link_82599; 325 mac->ops.get_link_capabilities = 326 &ixgbe_get_copper_link_capabilities_generic; 327 } 328 329 /* Set necessary function pointers based on phy type */ 330 switch (hw->phy.type) { 331 case ixgbe_phy_tn: 332 phy->ops.check_link = &ixgbe_check_phy_link_tnx; 333 phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; 334 phy->ops.get_firmware_version = 335 &ixgbe_get_phy_firmware_version_tnx; 336 break; 337 default: 338 break; 339 } 340 341 return ret_val; 342 } 343 344 /** 345 * ixgbe_get_link_capabilities_82599 - Determines link capabilities 346 * @hw: pointer to hardware structure 347 * @speed: pointer to link speed 348 * @autoneg: true when autoneg or autotry is enabled 349 * 350 * Determines the link capabilities by reading the AUTOC register. 351 **/ 352 static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, 353 ixgbe_link_speed *speed, 354 bool *autoneg) 355 { 356 u32 autoc = 0; 357 358 /* Determine 1G link capabilities off of SFP+ type */ 359 if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || 360 hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || 361 hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || 362 hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 || 363 hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || 364 hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) { 365 *speed = IXGBE_LINK_SPEED_1GB_FULL; 366 *autoneg = true; 367 return 0; 368 } 369 370 /* 371 * Determine link capabilities based on the stored value of AUTOC, 372 * which represents EEPROM defaults. If AUTOC value has not been 373 * stored, use the current register value. 374 */ 375 if (hw->mac.orig_link_settings_stored) 376 autoc = hw->mac.orig_autoc; 377 else 378 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 379 380 switch (autoc & IXGBE_AUTOC_LMS_MASK) { 381 case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: 382 *speed = IXGBE_LINK_SPEED_1GB_FULL; 383 *autoneg = false; 384 break; 385 386 case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: 387 *speed = IXGBE_LINK_SPEED_10GB_FULL; 388 *autoneg = false; 389 break; 390 391 case IXGBE_AUTOC_LMS_1G_AN: 392 *speed = IXGBE_LINK_SPEED_1GB_FULL; 393 *autoneg = true; 394 break; 395 396 case IXGBE_AUTOC_LMS_10G_SERIAL: 397 *speed = IXGBE_LINK_SPEED_10GB_FULL; 398 *autoneg = false; 399 break; 400 401 case IXGBE_AUTOC_LMS_KX4_KX_KR: 402 case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: 403 *speed = IXGBE_LINK_SPEED_UNKNOWN; 404 if (autoc & IXGBE_AUTOC_KR_SUPP) 405 *speed |= IXGBE_LINK_SPEED_10GB_FULL; 406 if (autoc & IXGBE_AUTOC_KX4_SUPP) 407 *speed |= IXGBE_LINK_SPEED_10GB_FULL; 408 if (autoc & IXGBE_AUTOC_KX_SUPP) 409 *speed |= IXGBE_LINK_SPEED_1GB_FULL; 410 *autoneg = true; 411 break; 412 413 case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: 414 *speed = IXGBE_LINK_SPEED_100_FULL; 415 if (autoc & IXGBE_AUTOC_KR_SUPP) 416 *speed |= IXGBE_LINK_SPEED_10GB_FULL; 417 if (autoc & IXGBE_AUTOC_KX4_SUPP) 418 *speed |= IXGBE_LINK_SPEED_10GB_FULL; 419 if (autoc & IXGBE_AUTOC_KX_SUPP) 420 *speed |= IXGBE_LINK_SPEED_1GB_FULL; 421 *autoneg = true; 422 break; 423 424 case IXGBE_AUTOC_LMS_SGMII_1G_100M: 425 *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; 426 *autoneg = false; 427 break; 428 429 default: 430 return IXGBE_ERR_LINK_SETUP; 431 } 432 433 if (hw->phy.multispeed_fiber) { 434 *speed |= IXGBE_LINK_SPEED_10GB_FULL | 435 IXGBE_LINK_SPEED_1GB_FULL; 436 437 /* QSFP must not enable auto-negotiation */ 438 if (hw->phy.media_type == ixgbe_media_type_fiber_qsfp) 439 *autoneg = false; 440 else 441 *autoneg = true; 442 } 443 444 return 0; 445 } 446 447 /** 448 * ixgbe_get_media_type_82599 - Get media type 449 * @hw: pointer to hardware structure 450 * 451 * Returns the media type (fiber, copper, backplane) 452 **/ 453 static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) 454 { 455 /* Detect if there is a copper PHY attached. */ 456 switch (hw->phy.type) { 457 case ixgbe_phy_cu_unknown: 458 case ixgbe_phy_tn: 459 return ixgbe_media_type_copper; 460 461 default: 462 break; 463 } 464 465 switch (hw->device_id) { 466 case IXGBE_DEV_ID_82599_KX4: 467 case IXGBE_DEV_ID_82599_KX4_MEZZ: 468 case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: 469 case IXGBE_DEV_ID_82599_KR: 470 case IXGBE_DEV_ID_82599_BACKPLANE_FCOE: 471 case IXGBE_DEV_ID_82599_XAUI_LOM: 472 /* Default device ID is mezzanine card KX/KX4 */ 473 return ixgbe_media_type_backplane; 474 475 case IXGBE_DEV_ID_82599_SFP: 476 case IXGBE_DEV_ID_82599_SFP_FCOE: 477 case IXGBE_DEV_ID_82599_SFP_EM: 478 case IXGBE_DEV_ID_82599_SFP_SF2: 479 case IXGBE_DEV_ID_82599_SFP_SF_QP: 480 case IXGBE_DEV_ID_82599EN_SFP: 481 return ixgbe_media_type_fiber; 482 483 case IXGBE_DEV_ID_82599_CX4: 484 return ixgbe_media_type_cx4; 485 486 case IXGBE_DEV_ID_82599_T3_LOM: 487 return ixgbe_media_type_copper; 488 489 case IXGBE_DEV_ID_82599_LS: 490 return ixgbe_media_type_fiber_lco; 491 492 case IXGBE_DEV_ID_82599_QSFP_SF_QP: 493 return ixgbe_media_type_fiber_qsfp; 494 495 default: 496 return ixgbe_media_type_unknown; 497 } 498 } 499 500 /** 501 * ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3 502 * @hw: pointer to hardware structure 503 * 504 * Disables link, should be called during D3 power down sequence. 505 * 506 **/ 507 static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw) 508 { 509 u32 autoc2_reg; 510 u16 ee_ctrl_2 = 0; 511 512 hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_2, &ee_ctrl_2); 513 514 if (!ixgbe_mng_present(hw) && !hw->wol_enabled && 515 ee_ctrl_2 & IXGBE_EEPROM_CCD_BIT) { 516 autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2); 517 autoc2_reg |= IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK; 518 IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg); 519 } 520 } 521 522 /** 523 * ixgbe_start_mac_link_82599 - Setup MAC link settings 524 * @hw: pointer to hardware structure 525 * @autoneg_wait_to_complete: true when waiting for completion is needed 526 * 527 * Configures link settings based on values in the ixgbe_hw struct. 528 * Restarts the link. Performs autonegotiation if needed. 529 **/ 530 static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, 531 bool autoneg_wait_to_complete) 532 { 533 u32 autoc_reg; 534 u32 links_reg; 535 u32 i; 536 s32 status = 0; 537 bool got_lock = false; 538 539 if (ixgbe_verify_lesm_fw_enabled_82599(hw)) { 540 status = hw->mac.ops.acquire_swfw_sync(hw, 541 IXGBE_GSSR_MAC_CSR_SM); 542 if (status) 543 return status; 544 545 got_lock = true; 546 } 547 548 /* Restart link */ 549 ixgbe_reset_pipeline_82599(hw); 550 551 if (got_lock) 552 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); 553 554 /* Only poll for autoneg to complete if specified to do so */ 555 if (autoneg_wait_to_complete) { 556 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); 557 if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == 558 IXGBE_AUTOC_LMS_KX4_KX_KR || 559 (autoc_reg & IXGBE_AUTOC_LMS_MASK) == 560 IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || 561 (autoc_reg & IXGBE_AUTOC_LMS_MASK) == 562 IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { 563 links_reg = 0; /* Just in case Autoneg time = 0 */ 564 for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { 565 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); 566 if (links_reg & IXGBE_LINKS_KX_AN_COMP) 567 break; 568 msleep(100); 569 } 570 if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { 571 status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; 572 hw_dbg(hw, "Autoneg did not complete.\n"); 573 } 574 } 575 } 576 577 /* Add delay to filter out noises during initial link setup */ 578 msleep(50); 579 580 return status; 581 } 582 583 /** 584 * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser 585 * @hw: pointer to hardware structure 586 * 587 * The base drivers may require better control over SFP+ module 588 * PHY states. This includes selectively shutting down the Tx 589 * laser on the PHY, effectively halting physical link. 590 **/ 591 static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) 592 { 593 u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); 594 595 /* Blocked by MNG FW so bail */ 596 if (ixgbe_check_reset_blocked(hw)) 597 return; 598 599 /* Disable tx laser; allow 100us to go dark per spec */ 600 esdp_reg |= IXGBE_ESDP_SDP3; 601 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); 602 IXGBE_WRITE_FLUSH(hw); 603 udelay(100); 604 } 605 606 /** 607 * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser 608 * @hw: pointer to hardware structure 609 * 610 * The base drivers may require better control over SFP+ module 611 * PHY states. This includes selectively turning on the Tx 612 * laser on the PHY, effectively starting physical link. 613 **/ 614 static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) 615 { 616 u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); 617 618 /* Enable tx laser; allow 100ms to light up */ 619 esdp_reg &= ~IXGBE_ESDP_SDP3; 620 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); 621 IXGBE_WRITE_FLUSH(hw); 622 msleep(100); 623 } 624 625 /** 626 * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser 627 * @hw: pointer to hardware structure 628 * 629 * When the driver changes the link speeds that it can support, 630 * it sets autotry_restart to true to indicate that we need to 631 * initiate a new autotry session with the link partner. To do 632 * so, we set the speed then disable and re-enable the tx laser, to 633 * alert the link partner that it also needs to restart autotry on its 634 * end. This is consistent with true clause 37 autoneg, which also 635 * involves a loss of signal. 636 **/ 637 static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) 638 { 639 /* Blocked by MNG FW so bail */ 640 if (ixgbe_check_reset_blocked(hw)) 641 return; 642 643 if (hw->mac.autotry_restart) { 644 ixgbe_disable_tx_laser_multispeed_fiber(hw); 645 ixgbe_enable_tx_laser_multispeed_fiber(hw); 646 hw->mac.autotry_restart = false; 647 } 648 } 649 650 /** 651 * ixgbe_set_hard_rate_select_speed - Set module link speed 652 * @hw: pointer to hardware structure 653 * @speed: link speed to set 654 * 655 * Set module link speed via RS0/RS1 rate select pins. 656 */ 657 static void 658 ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed) 659 { 660 u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); 661 662 switch (speed) { 663 case IXGBE_LINK_SPEED_10GB_FULL: 664 esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); 665 break; 666 case IXGBE_LINK_SPEED_1GB_FULL: 667 esdp_reg &= ~IXGBE_ESDP_SDP5; 668 esdp_reg |= IXGBE_ESDP_SDP5_DIR; 669 break; 670 default: 671 hw_dbg(hw, "Invalid fixed module speed\n"); 672 return; 673 } 674 675 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); 676 IXGBE_WRITE_FLUSH(hw); 677 } 678 679 /** 680 * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed 681 * @hw: pointer to hardware structure 682 * @speed: new link speed 683 * @autoneg_wait_to_complete: true when waiting for completion is needed 684 * 685 * Implements the Intel SmartSpeed algorithm. 686 **/ 687 static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, 688 ixgbe_link_speed speed, 689 bool autoneg_wait_to_complete) 690 { 691 s32 status = 0; 692 ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; 693 s32 i, j; 694 bool link_up = false; 695 u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); 696 697 /* Set autoneg_advertised value based on input link speed */ 698 hw->phy.autoneg_advertised = 0; 699 700 if (speed & IXGBE_LINK_SPEED_10GB_FULL) 701 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; 702 703 if (speed & IXGBE_LINK_SPEED_1GB_FULL) 704 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; 705 706 if (speed & IXGBE_LINK_SPEED_100_FULL) 707 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL; 708 709 /* 710 * Implement Intel SmartSpeed algorithm. SmartSpeed will reduce the 711 * autoneg advertisement if link is unable to be established at the 712 * highest negotiated rate. This can sometimes happen due to integrity 713 * issues with the physical media connection. 714 */ 715 716 /* First, try to get link with full advertisement */ 717 hw->phy.smart_speed_active = false; 718 for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) { 719 status = ixgbe_setup_mac_link_82599(hw, speed, 720 autoneg_wait_to_complete); 721 if (status != 0) 722 goto out; 723 724 /* 725 * Wait for the controller to acquire link. Per IEEE 802.3ap, 726 * Section 73.10.2, we may have to wait up to 500ms if KR is 727 * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per 728 * Table 9 in the AN MAS. 729 */ 730 for (i = 0; i < 5; i++) { 731 mdelay(100); 732 733 /* If we have link, just jump out */ 734 status = hw->mac.ops.check_link(hw, &link_speed, 735 &link_up, false); 736 if (status != 0) 737 goto out; 738 739 if (link_up) 740 goto out; 741 } 742 } 743 744 /* 745 * We didn't get link. If we advertised KR plus one of KX4/KX 746 * (or BX4/BX), then disable KR and try again. 747 */ 748 if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) || 749 ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0)) 750 goto out; 751 752 /* Turn SmartSpeed on to disable KR support */ 753 hw->phy.smart_speed_active = true; 754 status = ixgbe_setup_mac_link_82599(hw, speed, 755 autoneg_wait_to_complete); 756 if (status != 0) 757 goto out; 758 759 /* 760 * Wait for the controller to acquire link. 600ms will allow for 761 * the AN link_fail_inhibit_timer as well for multiple cycles of 762 * parallel detect, both 10g and 1g. This allows for the maximum 763 * connect attempts as defined in the AN MAS table 73-7. 764 */ 765 for (i = 0; i < 6; i++) { 766 mdelay(100); 767 768 /* If we have link, just jump out */ 769 status = hw->mac.ops.check_link(hw, &link_speed, 770 &link_up, false); 771 if (status != 0) 772 goto out; 773 774 if (link_up) 775 goto out; 776 } 777 778 /* We didn't get link. Turn SmartSpeed back off. */ 779 hw->phy.smart_speed_active = false; 780 status = ixgbe_setup_mac_link_82599(hw, speed, 781 autoneg_wait_to_complete); 782 783 out: 784 if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL)) 785 hw_dbg(hw, "Smartspeed has downgraded the link speed from the maximum advertised\n"); 786 return status; 787 } 788 789 /** 790 * ixgbe_setup_mac_link_82599 - Set MAC link speed 791 * @hw: pointer to hardware structure 792 * @speed: new link speed 793 * @autoneg_wait_to_complete: true when waiting for completion is needed 794 * 795 * Set the link speed in the AUTOC register and restarts link. 796 **/ 797 static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, 798 ixgbe_link_speed speed, 799 bool autoneg_wait_to_complete) 800 { 801 bool autoneg = false; 802 s32 status; 803 u32 pma_pmd_1g, link_mode, links_reg, i; 804 u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); 805 u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; 806 ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; 807 808 /* holds the value of AUTOC register at this current point in time */ 809 u32 current_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 810 /* holds the cached value of AUTOC register */ 811 u32 orig_autoc = 0; 812 /* temporary variable used for comparison purposes */ 813 u32 autoc = current_autoc; 814 815 /* Check to see if speed passed in is supported. */ 816 status = hw->mac.ops.get_link_capabilities(hw, &link_capabilities, 817 &autoneg); 818 if (status) 819 return status; 820 821 speed &= link_capabilities; 822 823 if (speed == IXGBE_LINK_SPEED_UNKNOWN) 824 return IXGBE_ERR_LINK_SETUP; 825 826 /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/ 827 if (hw->mac.orig_link_settings_stored) 828 orig_autoc = hw->mac.orig_autoc; 829 else 830 orig_autoc = autoc; 831 832 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; 833 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; 834 835 if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || 836 link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || 837 link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { 838 /* Set KX4/KX/KR support according to speed requested */ 839 autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP); 840 if (speed & IXGBE_LINK_SPEED_10GB_FULL) { 841 if (orig_autoc & IXGBE_AUTOC_KX4_SUPP) 842 autoc |= IXGBE_AUTOC_KX4_SUPP; 843 if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) && 844 (hw->phy.smart_speed_active == false)) 845 autoc |= IXGBE_AUTOC_KR_SUPP; 846 } 847 if (speed & IXGBE_LINK_SPEED_1GB_FULL) 848 autoc |= IXGBE_AUTOC_KX_SUPP; 849 } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) && 850 (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN || 851 link_mode == IXGBE_AUTOC_LMS_1G_AN)) { 852 /* Switch from 1G SFI to 10G SFI if requested */ 853 if ((speed == IXGBE_LINK_SPEED_10GB_FULL) && 854 (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) { 855 autoc &= ~IXGBE_AUTOC_LMS_MASK; 856 autoc |= IXGBE_AUTOC_LMS_10G_SERIAL; 857 } 858 } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) && 859 (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) { 860 /* Switch from 10G SFI to 1G SFI if requested */ 861 if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && 862 (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) { 863 autoc &= ~IXGBE_AUTOC_LMS_MASK; 864 if (autoneg) 865 autoc |= IXGBE_AUTOC_LMS_1G_AN; 866 else 867 autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN; 868 } 869 } 870 871 if (autoc != current_autoc) { 872 /* Restart link */ 873 status = hw->mac.ops.prot_autoc_write(hw, autoc, false); 874 if (status) 875 return status; 876 877 /* Only poll for autoneg to complete if specified to do so */ 878 if (autoneg_wait_to_complete) { 879 if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || 880 link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || 881 link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { 882 links_reg = 0; /*Just in case Autoneg time=0*/ 883 for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { 884 links_reg = 885 IXGBE_READ_REG(hw, IXGBE_LINKS); 886 if (links_reg & IXGBE_LINKS_KX_AN_COMP) 887 break; 888 msleep(100); 889 } 890 if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { 891 status = 892 IXGBE_ERR_AUTONEG_NOT_COMPLETE; 893 hw_dbg(hw, "Autoneg did not complete.\n"); 894 } 895 } 896 } 897 898 /* Add delay to filter out noises during initial link setup */ 899 msleep(50); 900 } 901 902 return status; 903 } 904 905 /** 906 * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field 907 * @hw: pointer to hardware structure 908 * @speed: new link speed 909 * @autoneg_wait_to_complete: true if waiting is needed to complete 910 * 911 * Restarts link on PHY and MAC based on settings passed in. 912 **/ 913 static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, 914 ixgbe_link_speed speed, 915 bool autoneg_wait_to_complete) 916 { 917 s32 status; 918 919 /* Setup the PHY according to input speed */ 920 status = hw->phy.ops.setup_link_speed(hw, speed, 921 autoneg_wait_to_complete); 922 /* Set up MAC */ 923 ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete); 924 925 return status; 926 } 927 928 /** 929 * ixgbe_reset_hw_82599 - Perform hardware reset 930 * @hw: pointer to hardware structure 931 * 932 * Resets the hardware by resetting the transmit and receive units, masks 933 * and clears all interrupts, perform a PHY reset, and perform a link (MAC) 934 * reset. 935 **/ 936 static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) 937 { 938 ixgbe_link_speed link_speed; 939 s32 status; 940 u32 ctrl, i, autoc, autoc2; 941 u32 curr_lms; 942 bool link_up = false; 943 944 /* Call adapter stop to disable tx/rx and clear interrupts */ 945 status = hw->mac.ops.stop_adapter(hw); 946 if (status) 947 return status; 948 949 /* flush pending Tx transactions */ 950 ixgbe_clear_tx_pending(hw); 951 952 /* PHY ops must be identified and initialized prior to reset */ 953 954 /* Identify PHY and related function pointers */ 955 status = hw->phy.ops.init(hw); 956 957 if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) 958 return status; 959 960 /* Setup SFP module if there is one present. */ 961 if (hw->phy.sfp_setup_needed) { 962 status = hw->mac.ops.setup_sfp(hw); 963 hw->phy.sfp_setup_needed = false; 964 } 965 966 if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) 967 return status; 968 969 /* Reset PHY */ 970 if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL) 971 hw->phy.ops.reset(hw); 972 973 /* remember AUTOC from before we reset */ 974 curr_lms = IXGBE_READ_REG(hw, IXGBE_AUTOC) & IXGBE_AUTOC_LMS_MASK; 975 976 mac_reset_top: 977 /* 978 * Issue global reset to the MAC. Needs to be SW reset if link is up. 979 * If link reset is used when link is up, it might reset the PHY when 980 * mng is using it. If link is down or the flag to force full link 981 * reset is set, then perform link reset. 982 */ 983 ctrl = IXGBE_CTRL_LNK_RST; 984 if (!hw->force_full_reset) { 985 hw->mac.ops.check_link(hw, &link_speed, &link_up, false); 986 if (link_up) 987 ctrl = IXGBE_CTRL_RST; 988 } 989 990 ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); 991 IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); 992 IXGBE_WRITE_FLUSH(hw); 993 994 /* Poll for reset bit to self-clear indicating reset is complete */ 995 for (i = 0; i < 10; i++) { 996 udelay(1); 997 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); 998 if (!(ctrl & IXGBE_CTRL_RST_MASK)) 999 break; 1000 } 1001 1002 if (ctrl & IXGBE_CTRL_RST_MASK) { 1003 status = IXGBE_ERR_RESET_FAILED; 1004 hw_dbg(hw, "Reset polling failed to complete.\n"); 1005 } 1006 1007 msleep(50); 1008 1009 /* 1010 * Double resets are required for recovery from certain error 1011 * conditions. Between resets, it is necessary to stall to allow time 1012 * for any pending HW events to complete. 1013 */ 1014 if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { 1015 hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; 1016 goto mac_reset_top; 1017 } 1018 1019 /* 1020 * Store the original AUTOC/AUTOC2 values if they have not been 1021 * stored off yet. Otherwise restore the stored original 1022 * values since the reset operation sets back to defaults. 1023 */ 1024 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 1025 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); 1026 1027 /* Enable link if disabled in NVM */ 1028 if (autoc2 & IXGBE_AUTOC2_LINK_DISABLE_MASK) { 1029 autoc2 &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK; 1030 IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); 1031 IXGBE_WRITE_FLUSH(hw); 1032 } 1033 1034 if (hw->mac.orig_link_settings_stored == false) { 1035 hw->mac.orig_autoc = autoc; 1036 hw->mac.orig_autoc2 = autoc2; 1037 hw->mac.orig_link_settings_stored = true; 1038 } else { 1039 1040 /* If MNG FW is running on a multi-speed device that 1041 * doesn't autoneg with out driver support we need to 1042 * leave LMS in the state it was before we MAC reset. 1043 * Likewise if we support WoL we don't want change the 1044 * LMS state either. 1045 */ 1046 if ((hw->phy.multispeed_fiber && ixgbe_mng_enabled(hw)) || 1047 hw->wol_enabled) 1048 hw->mac.orig_autoc = 1049 (hw->mac.orig_autoc & ~IXGBE_AUTOC_LMS_MASK) | 1050 curr_lms; 1051 1052 if (autoc != hw->mac.orig_autoc) { 1053 status = hw->mac.ops.prot_autoc_write(hw, 1054 hw->mac.orig_autoc, 1055 false); 1056 if (status) 1057 return status; 1058 } 1059 1060 if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) != 1061 (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) { 1062 autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK; 1063 autoc2 |= (hw->mac.orig_autoc2 & 1064 IXGBE_AUTOC2_UPPER_MASK); 1065 IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); 1066 } 1067 } 1068 1069 /* Store the permanent mac address */ 1070 hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); 1071 1072 /* 1073 * Store MAC address from RAR0, clear receive address registers, and 1074 * clear the multicast table. Also reset num_rar_entries to 128, 1075 * since we modify this value when programming the SAN MAC address. 1076 */ 1077 hw->mac.num_rar_entries = 128; 1078 hw->mac.ops.init_rx_addrs(hw); 1079 1080 /* Store the permanent SAN mac address */ 1081 hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); 1082 1083 /* Add the SAN MAC address to the RAR only if it's a valid address */ 1084 if (is_valid_ether_addr(hw->mac.san_addr)) { 1085 hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, 1086 hw->mac.san_addr, 0, IXGBE_RAH_AV); 1087 1088 /* Save the SAN MAC RAR index */ 1089 hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1; 1090 1091 /* Reserve the last RAR for the SAN MAC address */ 1092 hw->mac.num_rar_entries--; 1093 } 1094 1095 /* Store the alternative WWNN/WWPN prefix */ 1096 hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix, 1097 &hw->mac.wwpn_prefix); 1098 1099 return status; 1100 } 1101 1102 /** 1103 * ixgbe_fdir_check_cmd_complete - poll to check whether FDIRCMD is complete 1104 * @hw: pointer to hardware structure 1105 * @fdircmd: current value of FDIRCMD register 1106 */ 1107 static s32 ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw, u32 *fdircmd) 1108 { 1109 int i; 1110 1111 for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) { 1112 *fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD); 1113 if (!(*fdircmd & IXGBE_FDIRCMD_CMD_MASK)) 1114 return 0; 1115 udelay(10); 1116 } 1117 1118 return IXGBE_ERR_FDIR_CMD_INCOMPLETE; 1119 } 1120 1121 /** 1122 * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. 1123 * @hw: pointer to hardware structure 1124 **/ 1125 s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) 1126 { 1127 int i; 1128 u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL); 1129 u32 fdircmd; 1130 s32 err; 1131 1132 fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE; 1133 1134 /* 1135 * Before starting reinitialization process, 1136 * FDIRCMD.CMD must be zero. 1137 */ 1138 err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd); 1139 if (err) { 1140 hw_dbg(hw, "Flow Director previous command did not complete, aborting table re-initialization.\n"); 1141 return err; 1142 } 1143 1144 IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0); 1145 IXGBE_WRITE_FLUSH(hw); 1146 /* 1147 * 82599 adapters flow director init flow cannot be restarted, 1148 * Workaround 82599 silicon errata by performing the following steps 1149 * before re-writing the FDIRCTRL control register with the same value. 1150 * - write 1 to bit 8 of FDIRCMD register & 1151 * - write 0 to bit 8 of FDIRCMD register 1152 */ 1153 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, 1154 (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) | 1155 IXGBE_FDIRCMD_CLEARHT)); 1156 IXGBE_WRITE_FLUSH(hw); 1157 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, 1158 (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & 1159 ~IXGBE_FDIRCMD_CLEARHT)); 1160 IXGBE_WRITE_FLUSH(hw); 1161 /* 1162 * Clear FDIR Hash register to clear any leftover hashes 1163 * waiting to be programmed. 1164 */ 1165 IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00); 1166 IXGBE_WRITE_FLUSH(hw); 1167 1168 IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); 1169 IXGBE_WRITE_FLUSH(hw); 1170 1171 /* Poll init-done after we write FDIRCTRL register */ 1172 for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { 1173 if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & 1174 IXGBE_FDIRCTRL_INIT_DONE) 1175 break; 1176 usleep_range(1000, 2000); 1177 } 1178 if (i >= IXGBE_FDIR_INIT_DONE_POLL) { 1179 hw_dbg(hw, "Flow Director Signature poll time exceeded!\n"); 1180 return IXGBE_ERR_FDIR_REINIT_FAILED; 1181 } 1182 1183 /* Clear FDIR statistics registers (read to clear) */ 1184 IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT); 1185 IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT); 1186 IXGBE_READ_REG(hw, IXGBE_FDIRMATCH); 1187 IXGBE_READ_REG(hw, IXGBE_FDIRMISS); 1188 IXGBE_READ_REG(hw, IXGBE_FDIRLEN); 1189 1190 return 0; 1191 } 1192 1193 /** 1194 * ixgbe_fdir_enable_82599 - Initialize Flow Director control registers 1195 * @hw: pointer to hardware structure 1196 * @fdirctrl: value to write to flow director control register 1197 **/ 1198 static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl) 1199 { 1200 int i; 1201 1202 /* Prime the keys for hashing */ 1203 IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY); 1204 IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY); 1205 1206 /* 1207 * Poll init-done after we write the register. Estimated times: 1208 * 10G: PBALLOC = 11b, timing is 60us 1209 * 1G: PBALLOC = 11b, timing is 600us 1210 * 100M: PBALLOC = 11b, timing is 6ms 1211 * 1212 * Multiple these timings by 4 if under full Rx load 1213 * 1214 * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for 1215 * 1 msec per poll time. If we're at line rate and drop to 100M, then 1216 * this might not finish in our poll time, but we can live with that 1217 * for now. 1218 */ 1219 IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); 1220 IXGBE_WRITE_FLUSH(hw); 1221 for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { 1222 if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & 1223 IXGBE_FDIRCTRL_INIT_DONE) 1224 break; 1225 usleep_range(1000, 2000); 1226 } 1227 1228 if (i >= IXGBE_FDIR_INIT_DONE_POLL) 1229 hw_dbg(hw, "Flow Director poll time exceeded!\n"); 1230 } 1231 1232 /** 1233 * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters 1234 * @hw: pointer to hardware structure 1235 * @fdirctrl: value to write to flow director control register, initially 1236 * contains just the value of the Rx packet buffer allocation 1237 **/ 1238 s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl) 1239 { 1240 /* 1241 * Continue setup of fdirctrl register bits: 1242 * Move the flexible bytes to use the ethertype - shift 6 words 1243 * Set the maximum length per hash bucket to 0xA filters 1244 * Send interrupt when 64 filters are left 1245 */ 1246 fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) | 1247 (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) | 1248 (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT); 1249 1250 /* write hashes and fdirctrl register, poll for completion */ 1251 ixgbe_fdir_enable_82599(hw, fdirctrl); 1252 1253 return 0; 1254 } 1255 1256 /** 1257 * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters 1258 * @hw: pointer to hardware structure 1259 * @fdirctrl: value to write to flow director control register, initially 1260 * contains just the value of the Rx packet buffer allocation 1261 **/ 1262 s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl) 1263 { 1264 /* 1265 * Continue setup of fdirctrl register bits: 1266 * Turn perfect match filtering on 1267 * Initialize the drop queue 1268 * Move the flexible bytes to use the ethertype - shift 6 words 1269 * Set the maximum length per hash bucket to 0xA filters 1270 * Send interrupt when 64 (0x4 * 16) filters are left 1271 */ 1272 fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH | 1273 (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) | 1274 (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) | 1275 (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) | 1276 (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT); 1277 1278 /* write hashes and fdirctrl register, poll for completion */ 1279 ixgbe_fdir_enable_82599(hw, fdirctrl); 1280 1281 return 0; 1282 } 1283 1284 /* 1285 * These defines allow us to quickly generate all of the necessary instructions 1286 * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION 1287 * for values 0 through 15 1288 */ 1289 #define IXGBE_ATR_COMMON_HASH_KEY \ 1290 (IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY) 1291 #define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \ 1292 do { \ 1293 u32 n = (_n); \ 1294 if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \ 1295 common_hash ^= lo_hash_dword >> n; \ 1296 else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \ 1297 bucket_hash ^= lo_hash_dword >> n; \ 1298 else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \ 1299 sig_hash ^= lo_hash_dword << (16 - n); \ 1300 if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \ 1301 common_hash ^= hi_hash_dword >> n; \ 1302 else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \ 1303 bucket_hash ^= hi_hash_dword >> n; \ 1304 else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \ 1305 sig_hash ^= hi_hash_dword << (16 - n); \ 1306 } while (0) 1307 1308 /** 1309 * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash 1310 * @stream: input bitstream to compute the hash on 1311 * 1312 * This function is almost identical to the function above but contains 1313 * several optomizations such as unwinding all of the loops, letting the 1314 * compiler work out all of the conditional ifs since the keys are static 1315 * defines, and computing two keys at once since the hashed dword stream 1316 * will be the same for both keys. 1317 **/ 1318 static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input, 1319 union ixgbe_atr_hash_dword common) 1320 { 1321 u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan; 1322 u32 sig_hash = 0, bucket_hash = 0, common_hash = 0; 1323 1324 /* record the flow_vm_vlan bits as they are a key part to the hash */ 1325 flow_vm_vlan = ntohl(input.dword); 1326 1327 /* generate common hash dword */ 1328 hi_hash_dword = ntohl(common.dword); 1329 1330 /* low dword is word swapped version of common */ 1331 lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16); 1332 1333 /* apply flow ID/VM pool/VLAN ID bits to hash words */ 1334 hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16); 1335 1336 /* Process bits 0 and 16 */ 1337 IXGBE_COMPUTE_SIG_HASH_ITERATION(0); 1338 1339 /* 1340 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to 1341 * delay this because bit 0 of the stream should not be processed 1342 * so we do not add the vlan until after bit 0 was processed 1343 */ 1344 lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16); 1345 1346 /* Process remaining 30 bit of the key */ 1347 IXGBE_COMPUTE_SIG_HASH_ITERATION(1); 1348 IXGBE_COMPUTE_SIG_HASH_ITERATION(2); 1349 IXGBE_COMPUTE_SIG_HASH_ITERATION(3); 1350 IXGBE_COMPUTE_SIG_HASH_ITERATION(4); 1351 IXGBE_COMPUTE_SIG_HASH_ITERATION(5); 1352 IXGBE_COMPUTE_SIG_HASH_ITERATION(6); 1353 IXGBE_COMPUTE_SIG_HASH_ITERATION(7); 1354 IXGBE_COMPUTE_SIG_HASH_ITERATION(8); 1355 IXGBE_COMPUTE_SIG_HASH_ITERATION(9); 1356 IXGBE_COMPUTE_SIG_HASH_ITERATION(10); 1357 IXGBE_COMPUTE_SIG_HASH_ITERATION(11); 1358 IXGBE_COMPUTE_SIG_HASH_ITERATION(12); 1359 IXGBE_COMPUTE_SIG_HASH_ITERATION(13); 1360 IXGBE_COMPUTE_SIG_HASH_ITERATION(14); 1361 IXGBE_COMPUTE_SIG_HASH_ITERATION(15); 1362 1363 /* combine common_hash result with signature and bucket hashes */ 1364 bucket_hash ^= common_hash; 1365 bucket_hash &= IXGBE_ATR_HASH_MASK; 1366 1367 sig_hash ^= common_hash << 16; 1368 sig_hash &= IXGBE_ATR_HASH_MASK << 16; 1369 1370 /* return completed signature hash */ 1371 return sig_hash ^ bucket_hash; 1372 } 1373 1374 /** 1375 * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter 1376 * @hw: pointer to hardware structure 1377 * @input: unique input dword 1378 * @common: compressed common input dword 1379 * @queue: queue index to direct traffic to 1380 * 1381 * Note that the tunnel bit in input must not be set when the hardware 1382 * tunneling support does not exist. 1383 **/ 1384 s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, 1385 union ixgbe_atr_hash_dword input, 1386 union ixgbe_atr_hash_dword common, 1387 u8 queue) 1388 { 1389 u64 fdirhashcmd; 1390 u8 flow_type; 1391 bool tunnel; 1392 u32 fdircmd; 1393 1394 /* 1395 * Get the flow_type in order to program FDIRCMD properly 1396 * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6 1397 */ 1398 tunnel = !!(input.formatted.flow_type & IXGBE_ATR_L4TYPE_TUNNEL_MASK); 1399 flow_type = input.formatted.flow_type & 1400 (IXGBE_ATR_L4TYPE_TUNNEL_MASK - 1); 1401 switch (flow_type) { 1402 case IXGBE_ATR_FLOW_TYPE_TCPV4: 1403 case IXGBE_ATR_FLOW_TYPE_UDPV4: 1404 case IXGBE_ATR_FLOW_TYPE_SCTPV4: 1405 case IXGBE_ATR_FLOW_TYPE_TCPV6: 1406 case IXGBE_ATR_FLOW_TYPE_UDPV6: 1407 case IXGBE_ATR_FLOW_TYPE_SCTPV6: 1408 break; 1409 default: 1410 hw_dbg(hw, " Error on flow type input\n"); 1411 return IXGBE_ERR_CONFIG; 1412 } 1413 1414 /* configure FDIRCMD register */ 1415 fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | 1416 IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; 1417 fdircmd |= (u32)flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; 1418 fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; 1419 if (tunnel) 1420 fdircmd |= IXGBE_FDIRCMD_TUNNEL_FILTER; 1421 1422 /* 1423 * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits 1424 * is for FDIRCMD. Then do a 64-bit register write from FDIRHASH. 1425 */ 1426 fdirhashcmd = (u64)fdircmd << 32; 1427 fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common); 1428 IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd); 1429 1430 hw_dbg(hw, "Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd); 1431 1432 return 0; 1433 } 1434 1435 #define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \ 1436 do { \ 1437 u32 n = (_n); \ 1438 if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \ 1439 bucket_hash ^= lo_hash_dword >> n; \ 1440 if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \ 1441 bucket_hash ^= hi_hash_dword >> n; \ 1442 } while (0) 1443 1444 /** 1445 * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash 1446 * @atr_input: input bitstream to compute the hash on 1447 * @input_mask: mask for the input bitstream 1448 * 1449 * This function serves two main purposes. First it applys the input_mask 1450 * to the atr_input resulting in a cleaned up atr_input data stream. 1451 * Secondly it computes the hash and stores it in the bkt_hash field at 1452 * the end of the input byte stream. This way it will be available for 1453 * future use without needing to recompute the hash. 1454 **/ 1455 void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, 1456 union ixgbe_atr_input *input_mask) 1457 { 1458 1459 u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan; 1460 u32 bucket_hash = 0, hi_dword = 0; 1461 int i; 1462 1463 /* Apply masks to input data */ 1464 for (i = 0; i <= 10; i++) 1465 input->dword_stream[i] &= input_mask->dword_stream[i]; 1466 1467 /* record the flow_vm_vlan bits as they are a key part to the hash */ 1468 flow_vm_vlan = ntohl(input->dword_stream[0]); 1469 1470 /* generate common hash dword */ 1471 for (i = 1; i <= 10; i++) 1472 hi_dword ^= input->dword_stream[i]; 1473 hi_hash_dword = ntohl(hi_dword); 1474 1475 /* low dword is word swapped version of common */ 1476 lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16); 1477 1478 /* apply flow ID/VM pool/VLAN ID bits to hash words */ 1479 hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16); 1480 1481 /* Process bits 0 and 16 */ 1482 IXGBE_COMPUTE_BKT_HASH_ITERATION(0); 1483 1484 /* 1485 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to 1486 * delay this because bit 0 of the stream should not be processed 1487 * so we do not add the vlan until after bit 0 was processed 1488 */ 1489 lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16); 1490 1491 /* Process remaining 30 bit of the key */ 1492 for (i = 1; i <= 15; i++) 1493 IXGBE_COMPUTE_BKT_HASH_ITERATION(i); 1494 1495 /* 1496 * Limit hash to 13 bits since max bucket count is 8K. 1497 * Store result at the end of the input stream. 1498 */ 1499 input->formatted.bkt_hash = bucket_hash & 0x1FFF; 1500 } 1501 1502 /** 1503 * ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks 1504 * @input_mask: mask to be bit swapped 1505 * 1506 * The source and destination port masks for flow director are bit swapped 1507 * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to 1508 * generate a correctly swapped value we need to bit swap the mask and that 1509 * is what is accomplished by this function. 1510 **/ 1511 static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask) 1512 { 1513 u32 mask = ntohs(input_mask->formatted.dst_port); 1514 1515 mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT; 1516 mask |= ntohs(input_mask->formatted.src_port); 1517 mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1); 1518 mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2); 1519 mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4); 1520 return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8); 1521 } 1522 1523 /* 1524 * These two macros are meant to address the fact that we have registers 1525 * that are either all or in part big-endian. As a result on big-endian 1526 * systems we will end up byte swapping the value to little-endian before 1527 * it is byte swapped again and written to the hardware in the original 1528 * big-endian format. 1529 */ 1530 #define IXGBE_STORE_AS_BE32(_value) \ 1531 (((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \ 1532 (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24)) 1533 1534 #define IXGBE_WRITE_REG_BE32(a, reg, value) \ 1535 IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(ntohl(value))) 1536 1537 #define IXGBE_STORE_AS_BE16(_value) \ 1538 ntohs(((u16)(_value) >> 8) | ((u16)(_value) << 8)) 1539 1540 s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw, 1541 union ixgbe_atr_input *input_mask) 1542 { 1543 /* mask IPv6 since it is currently not supported */ 1544 u32 fdirm = IXGBE_FDIRM_DIPv6; 1545 u32 fdirtcpm; 1546 1547 /* 1548 * Program the relevant mask registers. If src/dst_port or src/dst_addr 1549 * are zero, then assume a full mask for that field. Also assume that 1550 * a VLAN of 0 is unspecified, so mask that out as well. L4type 1551 * cannot be masked out in this implementation. 1552 * 1553 * This also assumes IPv4 only. IPv6 masking isn't supported at this 1554 * point in time. 1555 */ 1556 1557 /* verify bucket hash is cleared on hash generation */ 1558 if (input_mask->formatted.bkt_hash) 1559 hw_dbg(hw, " bucket hash should always be 0 in mask\n"); 1560 1561 /* Program FDIRM and verify partial masks */ 1562 switch (input_mask->formatted.vm_pool & 0x7F) { 1563 case 0x0: 1564 fdirm |= IXGBE_FDIRM_POOL; 1565 case 0x7F: 1566 break; 1567 default: 1568 hw_dbg(hw, " Error on vm pool mask\n"); 1569 return IXGBE_ERR_CONFIG; 1570 } 1571 1572 switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) { 1573 case 0x0: 1574 fdirm |= IXGBE_FDIRM_L4P; 1575 if (input_mask->formatted.dst_port || 1576 input_mask->formatted.src_port) { 1577 hw_dbg(hw, " Error on src/dst port mask\n"); 1578 return IXGBE_ERR_CONFIG; 1579 } 1580 case IXGBE_ATR_L4TYPE_MASK: 1581 break; 1582 default: 1583 hw_dbg(hw, " Error on flow type mask\n"); 1584 return IXGBE_ERR_CONFIG; 1585 } 1586 1587 switch (ntohs(input_mask->formatted.vlan_id) & 0xEFFF) { 1588 case 0x0000: 1589 /* mask VLAN ID, fall through to mask VLAN priority */ 1590 fdirm |= IXGBE_FDIRM_VLANID; 1591 case 0x0FFF: 1592 /* mask VLAN priority */ 1593 fdirm |= IXGBE_FDIRM_VLANP; 1594 break; 1595 case 0xE000: 1596 /* mask VLAN ID only, fall through */ 1597 fdirm |= IXGBE_FDIRM_VLANID; 1598 case 0xEFFF: 1599 /* no VLAN fields masked */ 1600 break; 1601 default: 1602 hw_dbg(hw, " Error on VLAN mask\n"); 1603 return IXGBE_ERR_CONFIG; 1604 } 1605 1606 switch (input_mask->formatted.flex_bytes & 0xFFFF) { 1607 case 0x0000: 1608 /* Mask Flex Bytes, fall through */ 1609 fdirm |= IXGBE_FDIRM_FLEX; 1610 case 0xFFFF: 1611 break; 1612 default: 1613 hw_dbg(hw, " Error on flexible byte mask\n"); 1614 return IXGBE_ERR_CONFIG; 1615 } 1616 1617 /* Now mask VM pool and destination IPv6 - bits 5 and 2 */ 1618 IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm); 1619 1620 /* store the TCP/UDP port masks, bit reversed from port layout */ 1621 fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask); 1622 1623 /* write both the same so that UDP and TCP use the same mask */ 1624 IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm); 1625 IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm); 1626 1627 /* also use it for SCTP */ 1628 switch (hw->mac.type) { 1629 case ixgbe_mac_X550: 1630 case ixgbe_mac_X550EM_x: 1631 IXGBE_WRITE_REG(hw, IXGBE_FDIRSCTPM, ~fdirtcpm); 1632 break; 1633 default: 1634 break; 1635 } 1636 1637 /* store source and destination IP masks (big-enian) */ 1638 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M, 1639 ~input_mask->formatted.src_ip[0]); 1640 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M, 1641 ~input_mask->formatted.dst_ip[0]); 1642 1643 return 0; 1644 } 1645 1646 s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw, 1647 union ixgbe_atr_input *input, 1648 u16 soft_id, u8 queue) 1649 { 1650 u32 fdirport, fdirvlan, fdirhash, fdircmd; 1651 s32 err; 1652 1653 /* currently IPv6 is not supported, must be programmed with 0 */ 1654 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0), 1655 input->formatted.src_ip[0]); 1656 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1), 1657 input->formatted.src_ip[1]); 1658 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2), 1659 input->formatted.src_ip[2]); 1660 1661 /* record the source address (big-endian) */ 1662 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]); 1663 1664 /* record the first 32 bits of the destination address (big-endian) */ 1665 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]); 1666 1667 /* record source and destination port (little-endian)*/ 1668 fdirport = ntohs(input->formatted.dst_port); 1669 fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT; 1670 fdirport |= ntohs(input->formatted.src_port); 1671 IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport); 1672 1673 /* record vlan (little-endian) and flex_bytes(big-endian) */ 1674 fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes); 1675 fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT; 1676 fdirvlan |= ntohs(input->formatted.vlan_id); 1677 IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan); 1678 1679 /* configure FDIRHASH register */ 1680 fdirhash = input->formatted.bkt_hash; 1681 fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT; 1682 IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); 1683 1684 /* 1685 * flush all previous writes to make certain registers are 1686 * programmed prior to issuing the command 1687 */ 1688 IXGBE_WRITE_FLUSH(hw); 1689 1690 /* configure FDIRCMD register */ 1691 fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | 1692 IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; 1693 if (queue == IXGBE_FDIR_DROP_QUEUE) 1694 fdircmd |= IXGBE_FDIRCMD_DROP; 1695 fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; 1696 fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; 1697 fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT; 1698 1699 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd); 1700 err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd); 1701 if (err) { 1702 hw_dbg(hw, "Flow Director command did not complete!\n"); 1703 return err; 1704 } 1705 1706 return 0; 1707 } 1708 1709 s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, 1710 union ixgbe_atr_input *input, 1711 u16 soft_id) 1712 { 1713 u32 fdirhash; 1714 u32 fdircmd; 1715 s32 err; 1716 1717 /* configure FDIRHASH register */ 1718 fdirhash = input->formatted.bkt_hash; 1719 fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT; 1720 IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); 1721 1722 /* flush hash to HW */ 1723 IXGBE_WRITE_FLUSH(hw); 1724 1725 /* Query if filter is present */ 1726 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT); 1727 1728 err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd); 1729 if (err) { 1730 hw_dbg(hw, "Flow Director command did not complete!\n"); 1731 return err; 1732 } 1733 1734 /* if filter exists in hardware then remove it */ 1735 if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) { 1736 IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); 1737 IXGBE_WRITE_FLUSH(hw); 1738 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, 1739 IXGBE_FDIRCMD_CMD_REMOVE_FLOW); 1740 } 1741 1742 return 0; 1743 } 1744 1745 /** 1746 * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register 1747 * @hw: pointer to hardware structure 1748 * @reg: analog register to read 1749 * @val: read value 1750 * 1751 * Performs read operation to Omer analog register specified. 1752 **/ 1753 static s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) 1754 { 1755 u32 core_ctl; 1756 1757 IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD | 1758 (reg << 8)); 1759 IXGBE_WRITE_FLUSH(hw); 1760 udelay(10); 1761 core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL); 1762 *val = (u8)core_ctl; 1763 1764 return 0; 1765 } 1766 1767 /** 1768 * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register 1769 * @hw: pointer to hardware structure 1770 * @reg: atlas register to write 1771 * @val: value to write 1772 * 1773 * Performs write operation to Omer analog register specified. 1774 **/ 1775 static s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) 1776 { 1777 u32 core_ctl; 1778 1779 core_ctl = (reg << 8) | val; 1780 IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl); 1781 IXGBE_WRITE_FLUSH(hw); 1782 udelay(10); 1783 1784 return 0; 1785 } 1786 1787 /** 1788 * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx 1789 * @hw: pointer to hardware structure 1790 * 1791 * Starts the hardware using the generic start_hw function 1792 * and the generation start_hw function. 1793 * Then performs revision-specific operations, if any. 1794 **/ 1795 static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) 1796 { 1797 s32 ret_val = 0; 1798 1799 ret_val = ixgbe_start_hw_generic(hw); 1800 if (ret_val) 1801 return ret_val; 1802 1803 ret_val = ixgbe_start_hw_gen2(hw); 1804 if (ret_val) 1805 return ret_val; 1806 1807 /* We need to run link autotry after the driver loads */ 1808 hw->mac.autotry_restart = true; 1809 1810 if (ret_val) 1811 return ret_val; 1812 1813 return ixgbe_verify_fw_version_82599(hw); 1814 } 1815 1816 /** 1817 * ixgbe_identify_phy_82599 - Get physical layer module 1818 * @hw: pointer to hardware structure 1819 * 1820 * Determines the physical layer module found on the current adapter. 1821 * If PHY already detected, maintains current PHY type in hw struct, 1822 * otherwise executes the PHY detection routine. 1823 **/ 1824 static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) 1825 { 1826 s32 status; 1827 1828 /* Detect PHY if not unknown - returns success if already detected. */ 1829 status = ixgbe_identify_phy_generic(hw); 1830 if (status) { 1831 /* 82599 10GBASE-T requires an external PHY */ 1832 if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) 1833 return status; 1834 status = ixgbe_identify_module_generic(hw); 1835 } 1836 1837 /* Set PHY type none if no PHY detected */ 1838 if (hw->phy.type == ixgbe_phy_unknown) { 1839 hw->phy.type = ixgbe_phy_none; 1840 status = 0; 1841 } 1842 1843 /* Return error if SFP module has been detected but is not supported */ 1844 if (hw->phy.type == ixgbe_phy_sfp_unsupported) 1845 return IXGBE_ERR_SFP_NOT_SUPPORTED; 1846 1847 return status; 1848 } 1849 1850 /** 1851 * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599 1852 * @hw: pointer to hardware structure 1853 * @regval: register value to write to RXCTRL 1854 * 1855 * Enables the Rx DMA unit for 82599 1856 **/ 1857 static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) 1858 { 1859 /* 1860 * Workaround for 82599 silicon errata when enabling the Rx datapath. 1861 * If traffic is incoming before we enable the Rx unit, it could hang 1862 * the Rx DMA unit. Therefore, make sure the security engine is 1863 * completely disabled prior to enabling the Rx unit. 1864 */ 1865 hw->mac.ops.disable_rx_buff(hw); 1866 1867 if (regval & IXGBE_RXCTRL_RXEN) 1868 hw->mac.ops.enable_rx(hw); 1869 else 1870 hw->mac.ops.disable_rx(hw); 1871 1872 hw->mac.ops.enable_rx_buff(hw); 1873 1874 return 0; 1875 } 1876 1877 /** 1878 * ixgbe_verify_fw_version_82599 - verify fw version for 82599 1879 * @hw: pointer to hardware structure 1880 * 1881 * Verifies that installed the firmware version is 0.6 or higher 1882 * for SFI devices. All 82599 SFI devices should have version 0.6 or higher. 1883 * 1884 * Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or 1885 * if the FW version is not supported. 1886 **/ 1887 static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) 1888 { 1889 s32 status = IXGBE_ERR_EEPROM_VERSION; 1890 u16 fw_offset, fw_ptp_cfg_offset; 1891 u16 offset; 1892 u16 fw_version = 0; 1893 1894 /* firmware check is only necessary for SFI devices */ 1895 if (hw->phy.media_type != ixgbe_media_type_fiber) 1896 return 0; 1897 1898 /* get the offset to the Firmware Module block */ 1899 offset = IXGBE_FW_PTR; 1900 if (hw->eeprom.ops.read(hw, offset, &fw_offset)) 1901 goto fw_version_err; 1902 1903 if (fw_offset == 0 || fw_offset == 0xFFFF) 1904 return IXGBE_ERR_EEPROM_VERSION; 1905 1906 /* get the offset to the Pass Through Patch Configuration block */ 1907 offset = fw_offset + IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR; 1908 if (hw->eeprom.ops.read(hw, offset, &fw_ptp_cfg_offset)) 1909 goto fw_version_err; 1910 1911 if (fw_ptp_cfg_offset == 0 || fw_ptp_cfg_offset == 0xFFFF) 1912 return IXGBE_ERR_EEPROM_VERSION; 1913 1914 /* get the firmware version */ 1915 offset = fw_ptp_cfg_offset + IXGBE_FW_PATCH_VERSION_4; 1916 if (hw->eeprom.ops.read(hw, offset, &fw_version)) 1917 goto fw_version_err; 1918 1919 if (fw_version > 0x5) 1920 status = 0; 1921 1922 return status; 1923 1924 fw_version_err: 1925 hw_err(hw, "eeprom read at offset %d failed\n", offset); 1926 return IXGBE_ERR_EEPROM_VERSION; 1927 } 1928 1929 /** 1930 * ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state. 1931 * @hw: pointer to hardware structure 1932 * 1933 * Returns true if the LESM FW module is present and enabled. Otherwise 1934 * returns false. Smart Speed must be disabled if LESM FW module is enabled. 1935 **/ 1936 static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw) 1937 { 1938 u16 fw_offset, fw_lesm_param_offset, fw_lesm_state; 1939 s32 status; 1940 1941 /* get the offset to the Firmware Module block */ 1942 status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); 1943 1944 if (status || fw_offset == 0 || fw_offset == 0xFFFF) 1945 return false; 1946 1947 /* get the offset to the LESM Parameters block */ 1948 status = hw->eeprom.ops.read(hw, (fw_offset + 1949 IXGBE_FW_LESM_PARAMETERS_PTR), 1950 &fw_lesm_param_offset); 1951 1952 if (status || 1953 fw_lesm_param_offset == 0 || fw_lesm_param_offset == 0xFFFF) 1954 return false; 1955 1956 /* get the lesm state word */ 1957 status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset + 1958 IXGBE_FW_LESM_STATE_1), 1959 &fw_lesm_state); 1960 1961 if (!status && (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED)) 1962 return true; 1963 1964 return false; 1965 } 1966 1967 /** 1968 * ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using 1969 * fastest available method 1970 * 1971 * @hw: pointer to hardware structure 1972 * @offset: offset of word in EEPROM to read 1973 * @words: number of words 1974 * @data: word(s) read from the EEPROM 1975 * 1976 * Retrieves 16 bit word(s) read from EEPROM 1977 **/ 1978 static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, 1979 u16 words, u16 *data) 1980 { 1981 struct ixgbe_eeprom_info *eeprom = &hw->eeprom; 1982 1983 /* If EEPROM is detected and can be addressed using 14 bits, 1984 * use EERD otherwise use bit bang 1985 */ 1986 if (eeprom->type == ixgbe_eeprom_spi && 1987 offset + (words - 1) <= IXGBE_EERD_MAX_ADDR) 1988 return ixgbe_read_eerd_buffer_generic(hw, offset, words, data); 1989 1990 return ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset, words, 1991 data); 1992 } 1993 1994 /** 1995 * ixgbe_read_eeprom_82599 - Read EEPROM word using 1996 * fastest available method 1997 * 1998 * @hw: pointer to hardware structure 1999 * @offset: offset of word in the EEPROM to read 2000 * @data: word read from the EEPROM 2001 * 2002 * Reads a 16 bit word from the EEPROM 2003 **/ 2004 static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, 2005 u16 offset, u16 *data) 2006 { 2007 struct ixgbe_eeprom_info *eeprom = &hw->eeprom; 2008 2009 /* 2010 * If EEPROM is detected and can be addressed using 14 bits, 2011 * use EERD otherwise use bit bang 2012 */ 2013 if (eeprom->type == ixgbe_eeprom_spi && offset <= IXGBE_EERD_MAX_ADDR) 2014 return ixgbe_read_eerd_generic(hw, offset, data); 2015 2016 return ixgbe_read_eeprom_bit_bang_generic(hw, offset, data); 2017 } 2018 2019 /** 2020 * ixgbe_reset_pipeline_82599 - perform pipeline reset 2021 * 2022 * @hw: pointer to hardware structure 2023 * 2024 * Reset pipeline by asserting Restart_AN together with LMS change to ensure 2025 * full pipeline reset. Note - We must hold the SW/FW semaphore before writing 2026 * to AUTOC, so this function assumes the semaphore is held. 2027 **/ 2028 static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw) 2029 { 2030 s32 ret_val; 2031 u32 anlp1_reg = 0; 2032 u32 i, autoc_reg, autoc2_reg; 2033 2034 /* Enable link if disabled in NVM */ 2035 autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2); 2036 if (autoc2_reg & IXGBE_AUTOC2_LINK_DISABLE_MASK) { 2037 autoc2_reg &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK; 2038 IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg); 2039 IXGBE_WRITE_FLUSH(hw); 2040 } 2041 2042 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); 2043 autoc_reg |= IXGBE_AUTOC_AN_RESTART; 2044 2045 /* Write AUTOC register with toggled LMS[2] bit and Restart_AN */ 2046 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, 2047 autoc_reg ^ (0x4 << IXGBE_AUTOC_LMS_SHIFT)); 2048 2049 /* Wait for AN to leave state 0 */ 2050 for (i = 0; i < 10; i++) { 2051 usleep_range(4000, 8000); 2052 anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1); 2053 if (anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK) 2054 break; 2055 } 2056 2057 if (!(anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)) { 2058 hw_dbg(hw, "auto negotiation not completed\n"); 2059 ret_val = IXGBE_ERR_RESET_FAILED; 2060 goto reset_pipeline_out; 2061 } 2062 2063 ret_val = 0; 2064 2065 reset_pipeline_out: 2066 /* Write AUTOC register with original LMS field and Restart_AN */ 2067 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); 2068 IXGBE_WRITE_FLUSH(hw); 2069 2070 return ret_val; 2071 } 2072 2073 /** 2074 * ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C 2075 * @hw: pointer to hardware structure 2076 * @byte_offset: byte offset to read 2077 * @data: value read 2078 * 2079 * Performs byte read operation to SFP module's EEPROM over I2C interface at 2080 * a specified device address. 2081 **/ 2082 static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, 2083 u8 dev_addr, u8 *data) 2084 { 2085 u32 esdp; 2086 s32 status; 2087 s32 timeout = 200; 2088 2089 if (hw->phy.qsfp_shared_i2c_bus == true) { 2090 /* Acquire I2C bus ownership. */ 2091 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 2092 esdp |= IXGBE_ESDP_SDP0; 2093 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); 2094 IXGBE_WRITE_FLUSH(hw); 2095 2096 while (timeout) { 2097 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 2098 if (esdp & IXGBE_ESDP_SDP1) 2099 break; 2100 2101 usleep_range(5000, 10000); 2102 timeout--; 2103 } 2104 2105 if (!timeout) { 2106 hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n"); 2107 status = IXGBE_ERR_I2C; 2108 goto release_i2c_access; 2109 } 2110 } 2111 2112 status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data); 2113 2114 release_i2c_access: 2115 if (hw->phy.qsfp_shared_i2c_bus == true) { 2116 /* Release I2C bus ownership. */ 2117 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 2118 esdp &= ~IXGBE_ESDP_SDP0; 2119 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); 2120 IXGBE_WRITE_FLUSH(hw); 2121 } 2122 2123 return status; 2124 } 2125 2126 /** 2127 * ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C 2128 * @hw: pointer to hardware structure 2129 * @byte_offset: byte offset to write 2130 * @data: value to write 2131 * 2132 * Performs byte write operation to SFP module's EEPROM over I2C interface at 2133 * a specified device address. 2134 **/ 2135 static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, 2136 u8 dev_addr, u8 data) 2137 { 2138 u32 esdp; 2139 s32 status; 2140 s32 timeout = 200; 2141 2142 if (hw->phy.qsfp_shared_i2c_bus == true) { 2143 /* Acquire I2C bus ownership. */ 2144 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 2145 esdp |= IXGBE_ESDP_SDP0; 2146 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); 2147 IXGBE_WRITE_FLUSH(hw); 2148 2149 while (timeout) { 2150 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 2151 if (esdp & IXGBE_ESDP_SDP1) 2152 break; 2153 2154 usleep_range(5000, 10000); 2155 timeout--; 2156 } 2157 2158 if (!timeout) { 2159 hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n"); 2160 status = IXGBE_ERR_I2C; 2161 goto release_i2c_access; 2162 } 2163 } 2164 2165 status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data); 2166 2167 release_i2c_access: 2168 if (hw->phy.qsfp_shared_i2c_bus == true) { 2169 /* Release I2C bus ownership. */ 2170 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 2171 esdp &= ~IXGBE_ESDP_SDP0; 2172 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); 2173 IXGBE_WRITE_FLUSH(hw); 2174 } 2175 2176 return status; 2177 } 2178 2179 static struct ixgbe_mac_operations mac_ops_82599 = { 2180 .init_hw = &ixgbe_init_hw_generic, 2181 .reset_hw = &ixgbe_reset_hw_82599, 2182 .start_hw = &ixgbe_start_hw_82599, 2183 .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, 2184 .get_media_type = &ixgbe_get_media_type_82599, 2185 .enable_rx_dma = &ixgbe_enable_rx_dma_82599, 2186 .disable_rx_buff = &ixgbe_disable_rx_buff_generic, 2187 .enable_rx_buff = &ixgbe_enable_rx_buff_generic, 2188 .get_mac_addr = &ixgbe_get_mac_addr_generic, 2189 .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic, 2190 .get_device_caps = &ixgbe_get_device_caps_generic, 2191 .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic, 2192 .stop_adapter = &ixgbe_stop_adapter_generic, 2193 .get_bus_info = &ixgbe_get_bus_info_generic, 2194 .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, 2195 .read_analog_reg8 = &ixgbe_read_analog_reg8_82599, 2196 .write_analog_reg8 = &ixgbe_write_analog_reg8_82599, 2197 .stop_link_on_d3 = &ixgbe_stop_mac_link_on_d3_82599, 2198 .setup_link = &ixgbe_setup_mac_link_82599, 2199 .set_rxpba = &ixgbe_set_rxpba_generic, 2200 .check_link = &ixgbe_check_mac_link_generic, 2201 .get_link_capabilities = &ixgbe_get_link_capabilities_82599, 2202 .led_on = &ixgbe_led_on_generic, 2203 .led_off = &ixgbe_led_off_generic, 2204 .blink_led_start = &ixgbe_blink_led_start_generic, 2205 .blink_led_stop = &ixgbe_blink_led_stop_generic, 2206 .set_rar = &ixgbe_set_rar_generic, 2207 .clear_rar = &ixgbe_clear_rar_generic, 2208 .set_vmdq = &ixgbe_set_vmdq_generic, 2209 .set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic, 2210 .clear_vmdq = &ixgbe_clear_vmdq_generic, 2211 .init_rx_addrs = &ixgbe_init_rx_addrs_generic, 2212 .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, 2213 .enable_mc = &ixgbe_enable_mc_generic, 2214 .disable_mc = &ixgbe_disable_mc_generic, 2215 .clear_vfta = &ixgbe_clear_vfta_generic, 2216 .set_vfta = &ixgbe_set_vfta_generic, 2217 .fc_enable = &ixgbe_fc_enable_generic, 2218 .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic, 2219 .init_uta_tables = &ixgbe_init_uta_tables_generic, 2220 .setup_sfp = &ixgbe_setup_sfp_modules_82599, 2221 .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing, 2222 .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing, 2223 .acquire_swfw_sync = &ixgbe_acquire_swfw_sync, 2224 .release_swfw_sync = &ixgbe_release_swfw_sync, 2225 .get_thermal_sensor_data = &ixgbe_get_thermal_sensor_data_generic, 2226 .init_thermal_sensor_thresh = &ixgbe_init_thermal_sensor_thresh_generic, 2227 .prot_autoc_read = &prot_autoc_read_82599, 2228 .prot_autoc_write = &prot_autoc_write_82599, 2229 .enable_rx = &ixgbe_enable_rx_generic, 2230 .disable_rx = &ixgbe_disable_rx_generic, 2231 }; 2232 2233 static struct ixgbe_eeprom_operations eeprom_ops_82599 = { 2234 .init_params = &ixgbe_init_eeprom_params_generic, 2235 .read = &ixgbe_read_eeprom_82599, 2236 .read_buffer = &ixgbe_read_eeprom_buffer_82599, 2237 .write = &ixgbe_write_eeprom_generic, 2238 .write_buffer = &ixgbe_write_eeprom_buffer_bit_bang_generic, 2239 .calc_checksum = &ixgbe_calc_eeprom_checksum_generic, 2240 .validate_checksum = &ixgbe_validate_eeprom_checksum_generic, 2241 .update_checksum = &ixgbe_update_eeprom_checksum_generic, 2242 }; 2243 2244 static struct ixgbe_phy_operations phy_ops_82599 = { 2245 .identify = &ixgbe_identify_phy_82599, 2246 .identify_sfp = &ixgbe_identify_module_generic, 2247 .init = &ixgbe_init_phy_ops_82599, 2248 .reset = &ixgbe_reset_phy_generic, 2249 .read_reg = &ixgbe_read_phy_reg_generic, 2250 .write_reg = &ixgbe_write_phy_reg_generic, 2251 .setup_link = &ixgbe_setup_phy_link_generic, 2252 .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, 2253 .read_i2c_byte = &ixgbe_read_i2c_byte_generic, 2254 .write_i2c_byte = &ixgbe_write_i2c_byte_generic, 2255 .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, 2256 .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, 2257 .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, 2258 .check_overtemp = &ixgbe_tn_check_overtemp, 2259 }; 2260 2261 struct ixgbe_info ixgbe_82599_info = { 2262 .mac = ixgbe_mac_82599EB, 2263 .get_invariants = &ixgbe_get_invariants_82599, 2264 .mac_ops = &mac_ops_82599, 2265 .eeprom_ops = &eeprom_ops_82599, 2266 .phy_ops = &phy_ops_82599, 2267 .mbx_ops = &mbx_ops_generic, 2268 .mvals = ixgbe_mvals_8259X, 2269 }; 2270