xref: /linux/drivers/net/ethernet/intel/fm10k/fm10k_common.c (revision c0c914eca7f251c70facc37dfebeaf176601918d)
1 /* Intel Ethernet Switch Host Interface Driver
2  * Copyright(c) 2013 - 2014 Intel Corporation.
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms and conditions of the GNU General Public License,
6  * version 2, as published by the Free Software Foundation.
7  *
8  * This program is distributed in the hope it will be useful, but WITHOUT
9  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
11  * more details.
12  *
13  * The full GNU General Public License is included in this distribution in
14  * the file called "COPYING".
15  *
16  * Contact Information:
17  * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
18  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
19  */
20 
21 #include "fm10k_common.h"
22 
23 /**
24  *  fm10k_get_bus_info_generic - Generic set PCI bus info
25  *  @hw: pointer to hardware structure
26  *
27  *  Gets the PCI bus info (speed, width, type) then calls helper function to
28  *  store this data within the fm10k_hw structure.
29  **/
30 s32 fm10k_get_bus_info_generic(struct fm10k_hw *hw)
31 {
32 	u16 link_cap, link_status, device_cap, device_control;
33 
34 	/* Get the maximum link width and speed from PCIe config space */
35 	link_cap = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_LINK_CAP);
36 
37 	switch (link_cap & FM10K_PCIE_LINK_WIDTH) {
38 	case FM10K_PCIE_LINK_WIDTH_1:
39 		hw->bus_caps.width = fm10k_bus_width_pcie_x1;
40 		break;
41 	case FM10K_PCIE_LINK_WIDTH_2:
42 		hw->bus_caps.width = fm10k_bus_width_pcie_x2;
43 		break;
44 	case FM10K_PCIE_LINK_WIDTH_4:
45 		hw->bus_caps.width = fm10k_bus_width_pcie_x4;
46 		break;
47 	case FM10K_PCIE_LINK_WIDTH_8:
48 		hw->bus_caps.width = fm10k_bus_width_pcie_x8;
49 		break;
50 	default:
51 		hw->bus_caps.width = fm10k_bus_width_unknown;
52 		break;
53 	}
54 
55 	switch (link_cap & FM10K_PCIE_LINK_SPEED) {
56 	case FM10K_PCIE_LINK_SPEED_2500:
57 		hw->bus_caps.speed = fm10k_bus_speed_2500;
58 		break;
59 	case FM10K_PCIE_LINK_SPEED_5000:
60 		hw->bus_caps.speed = fm10k_bus_speed_5000;
61 		break;
62 	case FM10K_PCIE_LINK_SPEED_8000:
63 		hw->bus_caps.speed = fm10k_bus_speed_8000;
64 		break;
65 	default:
66 		hw->bus_caps.speed = fm10k_bus_speed_unknown;
67 		break;
68 	}
69 
70 	/* Get the PCIe maximum payload size for the PCIe function */
71 	device_cap = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_DEV_CAP);
72 
73 	switch (device_cap & FM10K_PCIE_DEV_CAP_PAYLOAD) {
74 	case FM10K_PCIE_DEV_CAP_PAYLOAD_128:
75 		hw->bus_caps.payload = fm10k_bus_payload_128;
76 		break;
77 	case FM10K_PCIE_DEV_CAP_PAYLOAD_256:
78 		hw->bus_caps.payload = fm10k_bus_payload_256;
79 		break;
80 	case FM10K_PCIE_DEV_CAP_PAYLOAD_512:
81 		hw->bus_caps.payload = fm10k_bus_payload_512;
82 		break;
83 	default:
84 		hw->bus_caps.payload = fm10k_bus_payload_unknown;
85 		break;
86 	}
87 
88 	/* Get the negotiated link width and speed from PCIe config space */
89 	link_status = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_LINK_STATUS);
90 
91 	switch (link_status & FM10K_PCIE_LINK_WIDTH) {
92 	case FM10K_PCIE_LINK_WIDTH_1:
93 		hw->bus.width = fm10k_bus_width_pcie_x1;
94 		break;
95 	case FM10K_PCIE_LINK_WIDTH_2:
96 		hw->bus.width = fm10k_bus_width_pcie_x2;
97 		break;
98 	case FM10K_PCIE_LINK_WIDTH_4:
99 		hw->bus.width = fm10k_bus_width_pcie_x4;
100 		break;
101 	case FM10K_PCIE_LINK_WIDTH_8:
102 		hw->bus.width = fm10k_bus_width_pcie_x8;
103 		break;
104 	default:
105 		hw->bus.width = fm10k_bus_width_unknown;
106 		break;
107 	}
108 
109 	switch (link_status & FM10K_PCIE_LINK_SPEED) {
110 	case FM10K_PCIE_LINK_SPEED_2500:
111 		hw->bus.speed = fm10k_bus_speed_2500;
112 		break;
113 	case FM10K_PCIE_LINK_SPEED_5000:
114 		hw->bus.speed = fm10k_bus_speed_5000;
115 		break;
116 	case FM10K_PCIE_LINK_SPEED_8000:
117 		hw->bus.speed = fm10k_bus_speed_8000;
118 		break;
119 	default:
120 		hw->bus.speed = fm10k_bus_speed_unknown;
121 		break;
122 	}
123 
124 	/* Get the negotiated PCIe maximum payload size for the PCIe function */
125 	device_control = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_DEV_CTRL);
126 
127 	switch (device_control & FM10K_PCIE_DEV_CTRL_PAYLOAD) {
128 	case FM10K_PCIE_DEV_CTRL_PAYLOAD_128:
129 		hw->bus.payload = fm10k_bus_payload_128;
130 		break;
131 	case FM10K_PCIE_DEV_CTRL_PAYLOAD_256:
132 		hw->bus.payload = fm10k_bus_payload_256;
133 		break;
134 	case FM10K_PCIE_DEV_CTRL_PAYLOAD_512:
135 		hw->bus.payload = fm10k_bus_payload_512;
136 		break;
137 	default:
138 		hw->bus.payload = fm10k_bus_payload_unknown;
139 		break;
140 	}
141 
142 	return 0;
143 }
144 
145 static u16 fm10k_get_pcie_msix_count_generic(struct fm10k_hw *hw)
146 {
147 	u16 msix_count;
148 
149 	/* read in value from MSI-X capability register */
150 	msix_count = fm10k_read_pci_cfg_word(hw, FM10K_PCI_MSIX_MSG_CTRL);
151 	msix_count &= FM10K_PCI_MSIX_MSG_CTRL_TBL_SZ_MASK;
152 
153 	/* MSI-X count is zero-based in HW */
154 	msix_count++;
155 
156 	if (msix_count > FM10K_MAX_MSIX_VECTORS)
157 		msix_count = FM10K_MAX_MSIX_VECTORS;
158 
159 	return msix_count;
160 }
161 
162 /**
163  *  fm10k_get_invariants_generic - Inits constant values
164  *  @hw: pointer to the hardware structure
165  *
166  *  Initialize the common invariants for the device.
167  **/
168 s32 fm10k_get_invariants_generic(struct fm10k_hw *hw)
169 {
170 	struct fm10k_mac_info *mac = &hw->mac;
171 
172 	/* initialize GLORT state to avoid any false hits */
173 	mac->dglort_map = FM10K_DGLORTMAP_NONE;
174 
175 	/* record maximum number of MSI-X vectors */
176 	mac->max_msix_vectors = fm10k_get_pcie_msix_count_generic(hw);
177 
178 	return 0;
179 }
180 
181 /**
182  *  fm10k_start_hw_generic - Prepare hardware for Tx/Rx
183  *  @hw: pointer to hardware structure
184  *
185  *  This function sets the Tx ready flag to indicate that the Tx path has
186  *  been initialized.
187  **/
188 s32 fm10k_start_hw_generic(struct fm10k_hw *hw)
189 {
190 	/* set flag indicating we are beginning Tx */
191 	hw->mac.tx_ready = true;
192 
193 	return 0;
194 }
195 
196 /**
197  *  fm10k_disable_queues_generic - Stop Tx/Rx queues
198  *  @hw: pointer to hardware structure
199  *  @q_cnt: number of queues to be disabled
200  *
201  **/
202 s32 fm10k_disable_queues_generic(struct fm10k_hw *hw, u16 q_cnt)
203 {
204 	u32 reg;
205 	u16 i, time;
206 
207 	/* clear tx_ready to prevent any false hits for reset */
208 	hw->mac.tx_ready = false;
209 
210 	/* clear the enable bit for all rings */
211 	for (i = 0; i < q_cnt; i++) {
212 		reg = fm10k_read_reg(hw, FM10K_TXDCTL(i));
213 		fm10k_write_reg(hw, FM10K_TXDCTL(i),
214 				reg & ~FM10K_TXDCTL_ENABLE);
215 		reg = fm10k_read_reg(hw, FM10K_RXQCTL(i));
216 		fm10k_write_reg(hw, FM10K_RXQCTL(i),
217 				reg & ~FM10K_RXQCTL_ENABLE);
218 	}
219 
220 	fm10k_write_flush(hw);
221 	udelay(1);
222 
223 	/* loop through all queues to verify that they are all disabled */
224 	for (i = 0, time = FM10K_QUEUE_DISABLE_TIMEOUT; time;) {
225 		/* if we are at end of rings all rings are disabled */
226 		if (i == q_cnt)
227 			return 0;
228 
229 		/* if queue enables cleared, then move to next ring pair */
230 		reg = fm10k_read_reg(hw, FM10K_TXDCTL(i));
231 		if (!~reg || !(reg & FM10K_TXDCTL_ENABLE)) {
232 			reg = fm10k_read_reg(hw, FM10K_RXQCTL(i));
233 			if (!~reg || !(reg & FM10K_RXQCTL_ENABLE)) {
234 				i++;
235 				continue;
236 			}
237 		}
238 
239 		/* decrement time and wait 1 usec */
240 		time--;
241 		if (time)
242 			udelay(1);
243 	}
244 
245 	return FM10K_ERR_REQUESTS_PENDING;
246 }
247 
248 /**
249  *  fm10k_stop_hw_generic - Stop Tx/Rx units
250  *  @hw: pointer to hardware structure
251  *
252  **/
253 s32 fm10k_stop_hw_generic(struct fm10k_hw *hw)
254 {
255 	return fm10k_disable_queues_generic(hw, hw->mac.max_queues);
256 }
257 
258 /**
259  *  fm10k_read_hw_stats_32b - Reads value of 32-bit registers
260  *  @hw: pointer to the hardware structure
261  *  @addr: address of register containing a 32-bit value
262  *
263  *  Function reads the content of the register and returns the delta
264  *  between the base and the current value.
265  *  **/
266 u32 fm10k_read_hw_stats_32b(struct fm10k_hw *hw, u32 addr,
267 			    struct fm10k_hw_stat *stat)
268 {
269 	u32 delta = fm10k_read_reg(hw, addr) - stat->base_l;
270 
271 	if (FM10K_REMOVED(hw->hw_addr))
272 		stat->base_h = 0;
273 
274 	return delta;
275 }
276 
277 /**
278  *  fm10k_read_hw_stats_48b - Reads value of 48-bit registers
279  *  @hw: pointer to the hardware structure
280  *  @addr: address of register containing the lower 32-bit value
281  *
282  *  Function reads the content of 2 registers, combined to represent a 48-bit
283  *  statistical value. Extra processing is required to handle overflowing.
284  *  Finally, a delta value is returned representing the difference between the
285  *  values stored in registers and values stored in the statistic counters.
286  *  **/
287 static u64 fm10k_read_hw_stats_48b(struct fm10k_hw *hw, u32 addr,
288 				   struct fm10k_hw_stat *stat)
289 {
290 	u32 count_l;
291 	u32 count_h;
292 	u32 count_tmp;
293 	u64 delta;
294 
295 	count_h = fm10k_read_reg(hw, addr + 1);
296 
297 	/* Check for overflow */
298 	do {
299 		count_tmp = count_h;
300 		count_l = fm10k_read_reg(hw, addr);
301 		count_h = fm10k_read_reg(hw, addr + 1);
302 	} while (count_h != count_tmp);
303 
304 	delta = ((u64)(count_h - stat->base_h) << 32) + count_l;
305 	delta -= stat->base_l;
306 
307 	return delta & FM10K_48_BIT_MASK;
308 }
309 
310 /**
311  *  fm10k_update_hw_base_48b - Updates 48-bit statistic base value
312  *  @stat: pointer to the hardware statistic structure
313  *  @delta: value to be updated into the hardware statistic structure
314  *
315  *  Function receives a value and determines if an update is required based on
316  *  a delta calculation. Only the base value will be updated.
317  **/
318 static void fm10k_update_hw_base_48b(struct fm10k_hw_stat *stat, u64 delta)
319 {
320 	if (!delta)
321 		return;
322 
323 	/* update lower 32 bits */
324 	delta += stat->base_l;
325 	stat->base_l = (u32)delta;
326 
327 	/* update upper 32 bits */
328 	stat->base_h += (u32)(delta >> 32);
329 }
330 
331 /**
332  *  fm10k_update_hw_stats_tx_q - Updates TX queue statistics counters
333  *  @hw: pointer to the hardware structure
334  *  @q: pointer to the ring of hardware statistics queue
335  *  @idx: index pointing to the start of the ring iteration
336  *
337  *  Function updates the TX queue statistics counters that are related to the
338  *  hardware.
339  **/
340 static void fm10k_update_hw_stats_tx_q(struct fm10k_hw *hw,
341 				       struct fm10k_hw_stats_q *q,
342 				       u32 idx)
343 {
344 	u32 id_tx, id_tx_prev, tx_packets;
345 	u64 tx_bytes = 0;
346 
347 	/* Retrieve TX Owner Data */
348 	id_tx = fm10k_read_reg(hw, FM10K_TXQCTL(idx));
349 
350 	/* Process TX Ring */
351 	do {
352 		tx_packets = fm10k_read_hw_stats_32b(hw, FM10K_QPTC(idx),
353 						     &q->tx_packets);
354 
355 		if (tx_packets)
356 			tx_bytes = fm10k_read_hw_stats_48b(hw,
357 							   FM10K_QBTC_L(idx),
358 							   &q->tx_bytes);
359 
360 		/* Re-Check Owner Data */
361 		id_tx_prev = id_tx;
362 		id_tx = fm10k_read_reg(hw, FM10K_TXQCTL(idx));
363 	} while ((id_tx ^ id_tx_prev) & FM10K_TXQCTL_ID_MASK);
364 
365 	/* drop non-ID bits and set VALID ID bit */
366 	id_tx &= FM10K_TXQCTL_ID_MASK;
367 	id_tx |= FM10K_STAT_VALID;
368 
369 	/* update packet counts */
370 	if (q->tx_stats_idx == id_tx) {
371 		q->tx_packets.count += tx_packets;
372 		q->tx_bytes.count += tx_bytes;
373 	}
374 
375 	/* update bases and record ID */
376 	fm10k_update_hw_base_32b(&q->tx_packets, tx_packets);
377 	fm10k_update_hw_base_48b(&q->tx_bytes, tx_bytes);
378 
379 	q->tx_stats_idx = id_tx;
380 }
381 
382 /**
383  *  fm10k_update_hw_stats_rx_q - Updates RX queue statistics counters
384  *  @hw: pointer to the hardware structure
385  *  @q: pointer to the ring of hardware statistics queue
386  *  @idx: index pointing to the start of the ring iteration
387  *
388  *  Function updates the RX queue statistics counters that are related to the
389  *  hardware.
390  **/
391 static void fm10k_update_hw_stats_rx_q(struct fm10k_hw *hw,
392 				       struct fm10k_hw_stats_q *q,
393 				       u32 idx)
394 {
395 	u32 id_rx, id_rx_prev, rx_packets, rx_drops;
396 	u64 rx_bytes = 0;
397 
398 	/* Retrieve RX Owner Data */
399 	id_rx = fm10k_read_reg(hw, FM10K_RXQCTL(idx));
400 
401 	/* Process RX Ring */
402 	do {
403 		rx_drops = fm10k_read_hw_stats_32b(hw, FM10K_QPRDC(idx),
404 						   &q->rx_drops);
405 
406 		rx_packets = fm10k_read_hw_stats_32b(hw, FM10K_QPRC(idx),
407 						     &q->rx_packets);
408 
409 		if (rx_packets)
410 			rx_bytes = fm10k_read_hw_stats_48b(hw,
411 							   FM10K_QBRC_L(idx),
412 							   &q->rx_bytes);
413 
414 		/* Re-Check Owner Data */
415 		id_rx_prev = id_rx;
416 		id_rx = fm10k_read_reg(hw, FM10K_RXQCTL(idx));
417 	} while ((id_rx ^ id_rx_prev) & FM10K_RXQCTL_ID_MASK);
418 
419 	/* drop non-ID bits and set VALID ID bit */
420 	id_rx &= FM10K_RXQCTL_ID_MASK;
421 	id_rx |= FM10K_STAT_VALID;
422 
423 	/* update packet counts */
424 	if (q->rx_stats_idx == id_rx) {
425 		q->rx_drops.count += rx_drops;
426 		q->rx_packets.count += rx_packets;
427 		q->rx_bytes.count += rx_bytes;
428 	}
429 
430 	/* update bases and record ID */
431 	fm10k_update_hw_base_32b(&q->rx_drops, rx_drops);
432 	fm10k_update_hw_base_32b(&q->rx_packets, rx_packets);
433 	fm10k_update_hw_base_48b(&q->rx_bytes, rx_bytes);
434 
435 	q->rx_stats_idx = id_rx;
436 }
437 
438 /**
439  *  fm10k_update_hw_stats_q - Updates queue statistics counters
440  *  @hw: pointer to the hardware structure
441  *  @q: pointer to the ring of hardware statistics queue
442  *  @idx: index pointing to the start of the ring iteration
443  *  @count: number of queues to iterate over
444  *
445  *  Function updates the queue statistics counters that are related to the
446  *  hardware.
447  **/
448 void fm10k_update_hw_stats_q(struct fm10k_hw *hw, struct fm10k_hw_stats_q *q,
449 			     u32 idx, u32 count)
450 {
451 	u32 i;
452 
453 	for (i = 0; i < count; i++, idx++, q++) {
454 		fm10k_update_hw_stats_tx_q(hw, q, idx);
455 		fm10k_update_hw_stats_rx_q(hw, q, idx);
456 	}
457 }
458 
459 /**
460  *  fm10k_unbind_hw_stats_q - Unbind the queue counters from their queues
461  *  @hw: pointer to the hardware structure
462  *  @q: pointer to the ring of hardware statistics queue
463  *  @idx: index pointing to the start of the ring iteration
464  *  @count: number of queues to iterate over
465  *
466  *  Function invalidates the index values for the queues so any updates that
467  *  may have happened are ignored and the base for the queue stats is reset.
468  **/
469 void fm10k_unbind_hw_stats_q(struct fm10k_hw_stats_q *q, u32 idx, u32 count)
470 {
471 	u32 i;
472 
473 	for (i = 0; i < count; i++, idx++, q++) {
474 		q->rx_stats_idx = 0;
475 		q->tx_stats_idx = 0;
476 	}
477 }
478 
479 /**
480  *  fm10k_get_host_state_generic - Returns the state of the host
481  *  @hw: pointer to hardware structure
482  *  @host_ready: pointer to boolean value that will record host state
483  *
484  *  This function will check the health of the mailbox and Tx queue 0
485  *  in order to determine if we should report that the link is up or not.
486  **/
487 s32 fm10k_get_host_state_generic(struct fm10k_hw *hw, bool *host_ready)
488 {
489 	struct fm10k_mbx_info *mbx = &hw->mbx;
490 	struct fm10k_mac_info *mac = &hw->mac;
491 	s32 ret_val = 0;
492 	u32 txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(0));
493 
494 	/* process upstream mailbox in case interrupts were disabled */
495 	mbx->ops.process(hw, mbx);
496 
497 	/* If Tx is no longer enabled link should come down */
498 	if (!(~txdctl) || !(txdctl & FM10K_TXDCTL_ENABLE))
499 		mac->get_host_state = true;
500 
501 	/* exit if not checking for link, or link cannot be changed */
502 	if (!mac->get_host_state || !(~txdctl))
503 		goto out;
504 
505 	/* if we somehow dropped the Tx enable we should reset */
506 	if (hw->mac.tx_ready && !(txdctl & FM10K_TXDCTL_ENABLE)) {
507 		ret_val = FM10K_ERR_RESET_REQUESTED;
508 		goto out;
509 	}
510 
511 	/* if Mailbox timed out we should request reset */
512 	if (!mbx->timeout) {
513 		ret_val = FM10K_ERR_RESET_REQUESTED;
514 		goto out;
515 	}
516 
517 	/* verify Mailbox is still valid */
518 	if (!mbx->ops.tx_ready(mbx, FM10K_VFMBX_MSG_MTU))
519 		goto out;
520 
521 	/* interface cannot receive traffic without logical ports */
522 	if (mac->dglort_map == FM10K_DGLORTMAP_NONE)
523 		goto out;
524 
525 	/* if we passed all the tests above then the switch is ready and we no
526 	 * longer need to check for link
527 	 */
528 	mac->get_host_state = false;
529 
530 out:
531 	*host_ready = !mac->get_host_state;
532 	return ret_val;
533 }
534