1 /* Intel PRO/1000 Linux driver 2 * Copyright(c) 1999 - 2015 Intel Corporation. 3 * 4 * This program is free software; you can redistribute it and/or modify it 5 * under the terms and conditions of the GNU General Public License, 6 * version 2, as published by the Free Software Foundation. 7 * 8 * This program is distributed in the hope it will be useful, but WITHOUT 9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 11 * more details. 12 * 13 * The full GNU General Public License is included in this distribution in 14 * the file called "COPYING". 15 * 16 * Contact Information: 17 * Linux NICS <linux.nics@intel.com> 18 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> 19 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 20 */ 21 22 #include "e1000.h" 23 24 /** 25 * e1000_calculate_checksum - Calculate checksum for buffer 26 * @buffer: pointer to EEPROM 27 * @length: size of EEPROM to calculate a checksum for 28 * 29 * Calculates the checksum for some buffer on a specified length. The 30 * checksum calculated is returned. 31 **/ 32 static u8 e1000_calculate_checksum(u8 *buffer, u32 length) 33 { 34 u32 i; 35 u8 sum = 0; 36 37 if (!buffer) 38 return 0; 39 40 for (i = 0; i < length; i++) 41 sum += buffer[i]; 42 43 return (u8)(0 - sum); 44 } 45 46 /** 47 * e1000_mng_enable_host_if - Checks host interface is enabled 48 * @hw: pointer to the HW structure 49 * 50 * Returns 0 upon success, else -E1000_ERR_HOST_INTERFACE_COMMAND 51 * 52 * This function checks whether the HOST IF is enabled for command operation 53 * and also checks whether the previous command is completed. It busy waits 54 * in case of previous command is not completed. 55 **/ 56 static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) 57 { 58 u32 hicr; 59 u8 i; 60 61 if (!hw->mac.arc_subsystem_valid) { 62 e_dbg("ARC subsystem not valid.\n"); 63 return -E1000_ERR_HOST_INTERFACE_COMMAND; 64 } 65 66 /* Check that the host interface is enabled. */ 67 hicr = er32(HICR); 68 if (!(hicr & E1000_HICR_EN)) { 69 e_dbg("E1000_HOST_EN bit disabled.\n"); 70 return -E1000_ERR_HOST_INTERFACE_COMMAND; 71 } 72 /* check the previous command is completed */ 73 for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { 74 hicr = er32(HICR); 75 if (!(hicr & E1000_HICR_C)) 76 break; 77 mdelay(1); 78 } 79 80 if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { 81 e_dbg("Previous command timeout failed.\n"); 82 return -E1000_ERR_HOST_INTERFACE_COMMAND; 83 } 84 85 return 0; 86 } 87 88 /** 89 * e1000e_check_mng_mode_generic - Generic check management mode 90 * @hw: pointer to the HW structure 91 * 92 * Reads the firmware semaphore register and returns true (>0) if 93 * manageability is enabled, else false (0). 94 **/ 95 bool e1000e_check_mng_mode_generic(struct e1000_hw *hw) 96 { 97 u32 fwsm = er32(FWSM); 98 99 return (fwsm & E1000_FWSM_MODE_MASK) == 100 (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT); 101 } 102 103 /** 104 * e1000e_enable_tx_pkt_filtering - Enable packet filtering on Tx 105 * @hw: pointer to the HW structure 106 * 107 * Enables packet filtering on transmit packets if manageability is enabled 108 * and host interface is enabled. 109 **/ 110 bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) 111 { 112 struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie; 113 u32 *buffer = (u32 *)&hw->mng_cookie; 114 u32 offset; 115 s32 ret_val, hdr_csum, csum; 116 u8 i, len; 117 118 hw->mac.tx_pkt_filtering = true; 119 120 /* No manageability, no filtering */ 121 if (!hw->mac.ops.check_mng_mode(hw)) { 122 hw->mac.tx_pkt_filtering = false; 123 return hw->mac.tx_pkt_filtering; 124 } 125 126 /* If we can't read from the host interface for whatever 127 * reason, disable filtering. 128 */ 129 ret_val = e1000_mng_enable_host_if(hw); 130 if (ret_val) { 131 hw->mac.tx_pkt_filtering = false; 132 return hw->mac.tx_pkt_filtering; 133 } 134 135 /* Read in the header. Length and offset are in dwords. */ 136 len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2; 137 offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2; 138 for (i = 0; i < len; i++) 139 *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, 140 offset + i); 141 hdr_csum = hdr->checksum; 142 hdr->checksum = 0; 143 csum = e1000_calculate_checksum((u8 *)hdr, 144 E1000_MNG_DHCP_COOKIE_LENGTH); 145 /* If either the checksums or signature don't match, then 146 * the cookie area isn't considered valid, in which case we 147 * take the safe route of assuming Tx filtering is enabled. 148 */ 149 if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) { 150 hw->mac.tx_pkt_filtering = true; 151 return hw->mac.tx_pkt_filtering; 152 } 153 154 /* Cookie area is valid, make the final check for filtering. */ 155 if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) 156 hw->mac.tx_pkt_filtering = false; 157 158 return hw->mac.tx_pkt_filtering; 159 } 160 161 /** 162 * e1000_mng_write_cmd_header - Writes manageability command header 163 * @hw: pointer to the HW structure 164 * @hdr: pointer to the host interface command header 165 * 166 * Writes the command header after does the checksum calculation. 167 **/ 168 static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, 169 struct e1000_host_mng_command_header *hdr) 170 { 171 u16 i, length = sizeof(struct e1000_host_mng_command_header); 172 173 /* Write the whole command header structure with new checksum. */ 174 175 hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length); 176 177 length >>= 2; 178 /* Write the relevant command block into the ram area. */ 179 for (i = 0; i < length; i++) { 180 E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, i, *((u32 *)hdr + i)); 181 e1e_flush(); 182 } 183 184 return 0; 185 } 186 187 /** 188 * e1000_mng_host_if_write - Write to the manageability host interface 189 * @hw: pointer to the HW structure 190 * @buffer: pointer to the host interface buffer 191 * @length: size of the buffer 192 * @offset: location in the buffer to write to 193 * @sum: sum of the data (not checksum) 194 * 195 * This function writes the buffer content at the offset given on the host if. 196 * It also does alignment considerations to do the writes in most efficient 197 * way. Also fills up the sum of the buffer in *buffer parameter. 198 **/ 199 static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, 200 u16 length, u16 offset, u8 *sum) 201 { 202 u8 *tmp; 203 u8 *bufptr = buffer; 204 u32 data = 0; 205 u16 remaining, i, j, prev_bytes; 206 207 /* sum = only sum of the data and it is not checksum */ 208 209 if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) 210 return -E1000_ERR_PARAM; 211 212 tmp = (u8 *)&data; 213 prev_bytes = offset & 0x3; 214 offset >>= 2; 215 216 if (prev_bytes) { 217 data = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset); 218 for (j = prev_bytes; j < sizeof(u32); j++) { 219 *(tmp + j) = *bufptr++; 220 *sum += *(tmp + j); 221 } 222 E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset, data); 223 length -= j - prev_bytes; 224 offset++; 225 } 226 227 remaining = length & 0x3; 228 length -= remaining; 229 230 /* Calculate length in DWORDs */ 231 length >>= 2; 232 233 /* The device driver writes the relevant command block into the 234 * ram area. 235 */ 236 for (i = 0; i < length; i++) { 237 for (j = 0; j < sizeof(u32); j++) { 238 *(tmp + j) = *bufptr++; 239 *sum += *(tmp + j); 240 } 241 242 E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data); 243 } 244 if (remaining) { 245 for (j = 0; j < sizeof(u32); j++) { 246 if (j < remaining) 247 *(tmp + j) = *bufptr++; 248 else 249 *(tmp + j) = 0; 250 251 *sum += *(tmp + j); 252 } 253 E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data); 254 } 255 256 return 0; 257 } 258 259 /** 260 * e1000e_mng_write_dhcp_info - Writes DHCP info to host interface 261 * @hw: pointer to the HW structure 262 * @buffer: pointer to the host interface 263 * @length: size of the buffer 264 * 265 * Writes the DHCP information to the host interface. 266 **/ 267 s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) 268 { 269 struct e1000_host_mng_command_header hdr; 270 s32 ret_val; 271 u32 hicr; 272 273 hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD; 274 hdr.command_length = length; 275 hdr.reserved1 = 0; 276 hdr.reserved2 = 0; 277 hdr.checksum = 0; 278 279 /* Enable the host interface */ 280 ret_val = e1000_mng_enable_host_if(hw); 281 if (ret_val) 282 return ret_val; 283 284 /* Populate the host interface with the contents of "buffer". */ 285 ret_val = e1000_mng_host_if_write(hw, buffer, length, 286 sizeof(hdr), &(hdr.checksum)); 287 if (ret_val) 288 return ret_val; 289 290 /* Write the manageability command header */ 291 ret_val = e1000_mng_write_cmd_header(hw, &hdr); 292 if (ret_val) 293 return ret_val; 294 295 /* Tell the ARC a new command is pending. */ 296 hicr = er32(HICR); 297 ew32(HICR, hicr | E1000_HICR_C); 298 299 return 0; 300 } 301 302 /** 303 * e1000e_enable_mng_pass_thru - Check if management passthrough is needed 304 * @hw: pointer to the HW structure 305 * 306 * Verifies the hardware needs to leave interface enabled so that frames can 307 * be directed to and from the management interface. 308 **/ 309 bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw) 310 { 311 u32 manc; 312 u32 fwsm, factps; 313 314 manc = er32(MANC); 315 316 if (!(manc & E1000_MANC_RCV_TCO_EN)) 317 return false; 318 319 if (hw->mac.has_fwsm) { 320 fwsm = er32(FWSM); 321 factps = er32(FACTPS); 322 323 if (!(factps & E1000_FACTPS_MNGCG) && 324 ((fwsm & E1000_FWSM_MODE_MASK) == 325 (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) 326 return true; 327 } else if ((hw->mac.type == e1000_82574) || 328 (hw->mac.type == e1000_82583)) { 329 u16 data; 330 s32 ret_val; 331 332 factps = er32(FACTPS); 333 ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data); 334 if (ret_val) 335 return false; 336 337 if (!(factps & E1000_FACTPS_MNGCG) && 338 ((data & E1000_NVM_INIT_CTRL2_MNGM) == 339 (e1000_mng_mode_pt << 13))) 340 return true; 341 } else if ((manc & E1000_MANC_SMBUS_EN) && 342 !(manc & E1000_MANC_ASF_EN)) { 343 return true; 344 } 345 346 return false; 347 } 348