1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Intel network device configuration 4# 5 6config NET_VENDOR_INTEL 7 bool "Intel devices" 8 default y 9 help 10 If you have a network (Ethernet) card belonging to this class, say Y. 11 12 Note that the answer to this question doesn't directly affect the 13 kernel: saying N will just cause the configurator to skip all 14 the questions about Intel cards. If you say Y, you will be asked for 15 your specific card in the following questions. 16 17if NET_VENDOR_INTEL 18 19source "drivers/net/ethernet/intel/libeth/Kconfig" 20source "drivers/net/ethernet/intel/libie/Kconfig" 21 22config E100 23 tristate "Intel(R) PRO/100+ support" 24 depends on PCI 25 select MII 26 help 27 This driver supports Intel(R) PRO/100 family of adapters. 28 To verify that your adapter is supported, find the board ID number 29 on the adapter. Look for a label that has a barcode and a number 30 in the format 123456-001 (six digits hyphen three digits). 31 32 Use the above information and the Adapter & Driver ID Guide that 33 can be located at: 34 35 <http://support.intel.com> 36 37 to identify the adapter. 38 39 More specific information on configuring the driver is in 40 <file:Documentation/networking/device_drivers/ethernet/intel/e100.rst>. 41 42 To compile this driver as a module, choose M here. The module 43 will be called e100. 44 45config E1000 46 tristate "Intel(R) PRO/1000 Gigabit Ethernet support" 47 depends on PCI && HAS_IOPORT 48 help 49 This driver supports Intel(R) PRO/1000 gigabit ethernet family of 50 adapters. For more information on how to identify your adapter, go 51 to the Adapter & Driver ID Guide that can be located at: 52 53 <http://support.intel.com> 54 55 More specific information on configuring the driver is in 56 <file:Documentation/networking/device_drivers/ethernet/intel/e1000.rst>. 57 58 To compile this driver as a module, choose M here. The module 59 will be called e1000. 60 61config E1000E 62 tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" 63 depends on PCI && (!SPARC32 || BROKEN) 64 depends on PTP_1588_CLOCK_OPTIONAL 65 select CRC32 66 help 67 This driver supports the PCI-Express Intel(R) PRO/1000 gigabit 68 ethernet family of adapters. For PCI or PCI-X e1000 adapters, 69 use the regular e1000 driver For more information on how to 70 identify your adapter, go to the Adapter & Driver ID Guide that 71 can be located at: 72 73 <http://support.intel.com> 74 75 More specific information on configuring the driver is in 76 <file:Documentation/networking/device_drivers/ethernet/intel/e1000e.rst>. 77 78 To compile this driver as a module, choose M here. The module 79 will be called e1000e. 80 81config E1000E_HWTS 82 bool "Support HW cross-timestamp on PCH devices" 83 default y 84 depends on E1000E && X86 85 help 86 Say Y to enable hardware supported cross-timestamping on PCH 87 devices. The cross-timestamp is available through the PTP clock 88 driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE). 89 90config IGB 91 tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" 92 depends on PCI 93 depends on PTP_1588_CLOCK_OPTIONAL 94 select I2C 95 select I2C_ALGOBIT 96 help 97 This driver supports Intel(R) 82575/82576 gigabit ethernet family of 98 adapters. For more information on how to identify your adapter, go 99 to the Adapter & Driver ID Guide that can be located at: 100 101 <http://support.intel.com> 102 103 More specific information on configuring the driver is in 104 <file:Documentation/networking/device_drivers/ethernet/intel/igb.rst>. 105 106 To compile this driver as a module, choose M here. The module 107 will be called igb. 108 109config IGB_HWMON 110 bool "Intel(R) PCI-Express Gigabit adapters HWMON support" 111 default y 112 depends on IGB && HWMON && !(IGB=y && HWMON=m) 113 help 114 Say Y if you want to expose thermal sensor data on Intel devices. 115 116 Some of our devices contain thermal sensors, both external and internal. 117 This data is available via the hwmon sysfs interface and exposes 118 the onboard sensors. 119 120config IGB_DCA 121 bool "Direct Cache Access (DCA) Support" 122 default y 123 depends on IGB && DCA && !(IGB=y && DCA=m) 124 help 125 Say Y here if you want to use Direct Cache Access (DCA) in the 126 driver. DCA is a method for warming the CPU cache before data 127 is used, with the intent of lessening the impact of cache misses. 128 129config IGBVF 130 tristate "Intel(R) 82576 Virtual Function Ethernet support" 131 depends on PCI 132 help 133 This driver supports Intel(R) 82576 virtual functions. For more 134 information on how to identify your adapter, go to the Adapter & 135 Driver ID Guide that can be located at: 136 137 <http://support.intel.com> 138 139 More specific information on configuring the driver is in 140 <file:Documentation/networking/device_drivers/ethernet/intel/igbvf.rst>. 141 142 To compile this driver as a module, choose M here. The module 143 will be called igbvf. 144 145config IXGBE 146 tristate "Intel(R) 10GbE PCI Express adapters support" 147 depends on PCI 148 depends on PTP_1588_CLOCK_OPTIONAL 149 select MDIO 150 select PHYLIB 151 help 152 This driver supports Intel(R) 10GbE PCI Express family of 153 adapters. For more information on how to identify your adapter, go 154 to the Adapter & Driver ID Guide that can be located at: 155 156 <http://support.intel.com> 157 158 More specific information on configuring the driver is in 159 <file:Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst>. 160 161 To compile this driver as a module, choose M here. The module 162 will be called ixgbe. 163 164config IXGBE_HWMON 165 bool "Intel(R) 10GbE PCI Express adapters HWMON support" 166 default y 167 depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m) 168 help 169 Say Y if you want to expose the thermal sensor data on some of 170 our cards, via a hwmon sysfs interface. 171 172config IXGBE_DCA 173 bool "Direct Cache Access (DCA) Support" 174 default y 175 depends on IXGBE && DCA && !(IXGBE=y && DCA=m) 176 help 177 Say Y here if you want to use Direct Cache Access (DCA) in the 178 driver. DCA is a method for warming the CPU cache before data 179 is used, with the intent of lessening the impact of cache misses. 180 181config IXGBE_DCB 182 bool "Data Center Bridging (DCB) Support" 183 default n 184 depends on IXGBE && DCB 185 help 186 Say Y here if you want to use Data Center Bridging (DCB) in the 187 driver. 188 189 If unsure, say N. 190 191config IXGBE_IPSEC 192 bool "IPSec XFRM cryptography-offload acceleration" 193 depends on IXGBE 194 depends on XFRM_OFFLOAD 195 default y 196 select XFRM_ALGO 197 help 198 Enable support for IPSec offload in ixgbe.ko 199 200config IXGBEVF 201 tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support" 202 depends on PCI_MSI 203 help 204 This driver supports Intel(R) PCI Express virtual functions for the 205 Intel(R) ixgbe driver. For more information on how to identify your 206 adapter, go to the Adapter & Driver ID Guide that can be located at: 207 208 <http://support.intel.com> 209 210 More specific information on configuring the driver is in 211 <file:Documentation/networking/device_drivers/ethernet/intel/ixgbevf.rst>. 212 213 To compile this driver as a module, choose M here. The module 214 will be called ixgbevf. MSI-X interrupt support is required 215 for this driver to work correctly. 216 217config IXGBEVF_IPSEC 218 bool "IPSec XFRM cryptography-offload acceleration" 219 depends on IXGBEVF 220 depends on XFRM_OFFLOAD 221 default y 222 select XFRM_ALGO 223 help 224 Enable support for IPSec offload in ixgbevf.ko 225 226config I40E 227 tristate "Intel(R) Ethernet Controller XL710 Family support" 228 depends on PTP_1588_CLOCK_OPTIONAL 229 depends on PCI 230 select AUXILIARY_BUS 231 select LIBIE 232 select NET_DEVLINK 233 help 234 This driver supports Intel(R) Ethernet Controller XL710 Family of 235 devices. For more information on how to identify your adapter, go 236 to the Adapter & Driver ID Guide that can be located at: 237 238 <http://support.intel.com> 239 240 More specific information on configuring the driver is in 241 <file:Documentation/networking/device_drivers/ethernet/intel/i40e.rst>. 242 243 To compile this driver as a module, choose M here. The module 244 will be called i40e. 245 246config I40E_DCB 247 bool "Data Center Bridging (DCB) Support" 248 default n 249 depends on I40E && DCB 250 help 251 Say Y here if you want to use Data Center Bridging (DCB) in the 252 driver. 253 254 If unsure, say N. 255 256# this is here to allow seamless migration from I40EVF --> IAVF name 257# so that CONFIG_IAVF symbol will always mirror the state of CONFIG_I40EVF 258config IAVF 259 tristate 260 select LIBIE 261 select NET_SHAPER 262 263config I40EVF 264 tristate "Intel(R) Ethernet Adaptive Virtual Function support" 265 select IAVF 266 depends on PCI_MSI 267 help 268 This driver supports virtual functions for Intel XL710, 269 X710, X722, XXV710, and all devices advertising support for 270 Intel Ethernet Adaptive Virtual Function devices. For more 271 information on how to identify your adapter, go to the Adapter 272 & Driver ID Guide that can be located at: 273 274 <https://support.intel.com> 275 276 This driver was formerly named i40evf. 277 278 More specific information on configuring the driver is in 279 <file:Documentation/networking/device_drivers/ethernet/intel/iavf.rst>. 280 281 To compile this driver as a module, choose M here. The module 282 will be called iavf. MSI-X interrupt support is required 283 for this driver to work correctly. 284 285config ICE 286 tristate "Intel(R) Ethernet Connection E800 Series Support" 287 default n 288 depends on PCI_MSI 289 depends on PTP_1588_CLOCK_OPTIONAL 290 depends on GNSS || GNSS = n 291 select AUXILIARY_BUS 292 select DIMLIB 293 select LIBIE 294 select NET_DEVLINK 295 select PLDMFW 296 select DPLL 297 help 298 This driver supports Intel(R) Ethernet Connection E800 Series of 299 devices. For more information on how to identify your adapter, go 300 to the Adapter & Driver ID Guide that can be located at: 301 302 <http://support.intel.com> 303 304 More specific information on configuring the driver is in 305 <file:Documentation/networking/device_drivers/ethernet/intel/ice.rst>. 306 307 To compile this driver as a module, choose M here. The module 308 will be called ice. 309 310config ICE_HWMON 311 bool "Intel(R) Ethernet Connection E800 Series Support HWMON support" 312 default y 313 depends on ICE && HWMON && !(ICE=y && HWMON=m) 314 help 315 Say Y if you want to expose thermal sensor data on Intel devices. 316 317 Some of our devices contain internal thermal sensors. 318 This data is available via the hwmon sysfs interface and exposes 319 the onboard sensors. 320 321config ICE_SWITCHDEV 322 bool "Switchdev Support" 323 default y 324 depends on ICE && NET_SWITCHDEV 325 help 326 Switchdev support provides internal SRIOV packet steering and switching. 327 328 To enable it on running kernel use devlink tool: 329 #devlink dev eswitch set pci/0000:XX:XX.X mode switchdev 330 331 Say Y here if you want to use Switchdev in the driver. 332 333 If unsure, say N. 334 335config ICE_HWTS 336 bool "Support HW cross-timestamp on platforms with PTM support" 337 default y 338 depends on ICE && X86 339 help 340 Say Y to enable hardware supported cross-timestamping on platforms 341 with PCIe PTM support. The cross-timestamp is available through 342 the PTP clock driver precise cross-timestamp ioctl 343 (PTP_SYS_OFFSET_PRECISE). 344 345config FM10K 346 tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support" 347 default n 348 depends on PCI_MSI 349 depends on PTP_1588_CLOCK_OPTIONAL 350 help 351 This driver supports Intel(R) FM10000 Ethernet Switch Host 352 Interface. For more information on how to identify your adapter, 353 go to the Adapter & Driver ID Guide that can be located at: 354 355 <http://support.intel.com> 356 357 More specific information on configuring the driver is in 358 <file:Documentation/networking/device_drivers/ethernet/intel/fm10k.rst>. 359 360 To compile this driver as a module, choose M here. The module 361 will be called fm10k. MSI-X interrupt support is required 362 363config IGC 364 tristate "Intel(R) Ethernet Controller I225-LM/I225-V support" 365 default n 366 depends on PCI 367 depends on PTP_1588_CLOCK_OPTIONAL 368 help 369 This driver supports Intel(R) Ethernet Controller I225-LM/I225-V 370 family of adapters. 371 372 For more information on how to identify your adapter, go 373 to the Adapter & Driver ID Guide that can be located at: 374 375 <http://support.intel.com> 376 377 To compile this driver as a module, choose M here. The module 378 will be called igc. 379 380config IGC_LEDS 381 def_bool LEDS_TRIGGER_NETDEV 382 depends on IGC && LEDS_CLASS 383 depends on LEDS_CLASS=y || IGC=m 384 help 385 Optional support for controlling the NIC LED's with the netdev 386 LED trigger. 387 388source "drivers/net/ethernet/intel/idpf/Kconfig" 389 390endif # NET_VENDOR_INTEL 391