1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Linux network driver for QLogic BR-series Converged Network Adapter. 4 */ 5 /* 6 * Copyright (c) 2005-2014 Brocade Communications Systems, Inc. 7 * Copyright (c) 2014-2015 QLogic Corporation 8 * All rights reserved 9 * www.qlogic.com 10 */ 11 12 #include "bfa_ioc.h" 13 #include "cna.h" 14 #include "bfi.h" 15 #include "bfi_reg.h" 16 #include "bfa_defs.h" 17 18 #define bfa_ioc_ct_sync_pos(__ioc) BIT(bfa_ioc_pcifn(__ioc)) 19 #define BFA_IOC_SYNC_REQD_SH 16 20 #define bfa_ioc_ct_get_sync_ackd(__val) (__val & 0x0000ffff) 21 #define bfa_ioc_ct_clear_sync_ackd(__val) (__val & 0xffff0000) 22 #define bfa_ioc_ct_get_sync_reqd(__val) (__val >> BFA_IOC_SYNC_REQD_SH) 23 #define bfa_ioc_ct_sync_reqd_pos(__ioc) \ 24 (bfa_ioc_ct_sync_pos(__ioc) << BFA_IOC_SYNC_REQD_SH) 25 26 /* 27 * forward declarations 28 */ 29 static bool bfa_ioc_ct_firmware_lock(struct bfa_ioc *ioc); 30 static void bfa_ioc_ct_firmware_unlock(struct bfa_ioc *ioc); 31 static void bfa_ioc_ct_reg_init(struct bfa_ioc *ioc); 32 static void bfa_ioc_ct2_reg_init(struct bfa_ioc *ioc); 33 static void bfa_ioc_ct_map_port(struct bfa_ioc *ioc); 34 static void bfa_ioc_ct2_map_port(struct bfa_ioc *ioc); 35 static void bfa_ioc_ct_isr_mode_set(struct bfa_ioc *ioc, bool msix); 36 static void bfa_ioc_ct_notify_fail(struct bfa_ioc *ioc); 37 static void bfa_ioc_ct_ownership_reset(struct bfa_ioc *ioc); 38 static bool bfa_ioc_ct_sync_start(struct bfa_ioc *ioc); 39 static void bfa_ioc_ct_sync_join(struct bfa_ioc *ioc); 40 static void bfa_ioc_ct_sync_leave(struct bfa_ioc *ioc); 41 static void bfa_ioc_ct_sync_ack(struct bfa_ioc *ioc); 42 static bool bfa_ioc_ct_sync_complete(struct bfa_ioc *ioc); 43 static void bfa_ioc_ct_set_cur_ioc_fwstate( 44 struct bfa_ioc *ioc, enum bfi_ioc_state fwstate); 45 static enum bfi_ioc_state bfa_ioc_ct_get_cur_ioc_fwstate(struct bfa_ioc *ioc); 46 static void bfa_ioc_ct_set_alt_ioc_fwstate( 47 struct bfa_ioc *ioc, enum bfi_ioc_state fwstate); 48 static enum bfi_ioc_state bfa_ioc_ct_get_alt_ioc_fwstate(struct bfa_ioc *ioc); 49 static enum bfa_status bfa_ioc_ct_pll_init(void __iomem *rb, 50 enum bfi_asic_mode asic_mode); 51 static enum bfa_status bfa_ioc_ct2_pll_init(void __iomem *rb, 52 enum bfi_asic_mode asic_mode); 53 static bool bfa_ioc_ct2_lpu_read_stat(struct bfa_ioc *ioc); 54 55 static const struct bfa_ioc_hwif nw_hwif_ct = { 56 .ioc_pll_init = bfa_ioc_ct_pll_init, 57 .ioc_firmware_lock = bfa_ioc_ct_firmware_lock, 58 .ioc_firmware_unlock = bfa_ioc_ct_firmware_unlock, 59 .ioc_reg_init = bfa_ioc_ct_reg_init, 60 .ioc_map_port = bfa_ioc_ct_map_port, 61 .ioc_isr_mode_set = bfa_ioc_ct_isr_mode_set, 62 .ioc_notify_fail = bfa_ioc_ct_notify_fail, 63 .ioc_ownership_reset = bfa_ioc_ct_ownership_reset, 64 .ioc_sync_start = bfa_ioc_ct_sync_start, 65 .ioc_sync_join = bfa_ioc_ct_sync_join, 66 .ioc_sync_leave = bfa_ioc_ct_sync_leave, 67 .ioc_sync_ack = bfa_ioc_ct_sync_ack, 68 .ioc_sync_complete = bfa_ioc_ct_sync_complete, 69 .ioc_set_fwstate = bfa_ioc_ct_set_cur_ioc_fwstate, 70 .ioc_get_fwstate = bfa_ioc_ct_get_cur_ioc_fwstate, 71 .ioc_set_alt_fwstate = bfa_ioc_ct_set_alt_ioc_fwstate, 72 .ioc_get_alt_fwstate = bfa_ioc_ct_get_alt_ioc_fwstate, 73 }; 74 75 static const struct bfa_ioc_hwif nw_hwif_ct2 = { 76 .ioc_pll_init = bfa_ioc_ct2_pll_init, 77 .ioc_firmware_lock = bfa_ioc_ct_firmware_lock, 78 .ioc_firmware_unlock = bfa_ioc_ct_firmware_unlock, 79 .ioc_reg_init = bfa_ioc_ct2_reg_init, 80 .ioc_map_port = bfa_ioc_ct2_map_port, 81 .ioc_lpu_read_stat = bfa_ioc_ct2_lpu_read_stat, 82 .ioc_isr_mode_set = NULL, 83 .ioc_notify_fail = bfa_ioc_ct_notify_fail, 84 .ioc_ownership_reset = bfa_ioc_ct_ownership_reset, 85 .ioc_sync_start = bfa_ioc_ct_sync_start, 86 .ioc_sync_join = bfa_ioc_ct_sync_join, 87 .ioc_sync_leave = bfa_ioc_ct_sync_leave, 88 .ioc_sync_ack = bfa_ioc_ct_sync_ack, 89 .ioc_sync_complete = bfa_ioc_ct_sync_complete, 90 .ioc_set_fwstate = bfa_ioc_ct_set_cur_ioc_fwstate, 91 .ioc_get_fwstate = bfa_ioc_ct_get_cur_ioc_fwstate, 92 .ioc_set_alt_fwstate = bfa_ioc_ct_set_alt_ioc_fwstate, 93 .ioc_get_alt_fwstate = bfa_ioc_ct_get_alt_ioc_fwstate, 94 }; 95 96 /* Called from bfa_ioc_attach() to map asic specific calls. */ 97 void 98 bfa_nw_ioc_set_ct_hwif(struct bfa_ioc *ioc) 99 { 100 ioc->ioc_hwif = &nw_hwif_ct; 101 } 102 103 void 104 bfa_nw_ioc_set_ct2_hwif(struct bfa_ioc *ioc) 105 { 106 ioc->ioc_hwif = &nw_hwif_ct2; 107 } 108 109 /* Return true if firmware of current driver matches the running firmware. */ 110 static bool 111 bfa_ioc_ct_firmware_lock(struct bfa_ioc *ioc) 112 { 113 enum bfi_ioc_state ioc_fwstate; 114 u32 usecnt; 115 struct bfi_ioc_image_hdr fwhdr; 116 117 /** 118 * If bios boot (flash based) -- do not increment usage count 119 */ 120 if (bfa_cb_image_get_size(bfa_ioc_asic_gen(ioc)) < 121 BFA_IOC_FWIMG_MINSZ) 122 return true; 123 124 bfa_nw_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg); 125 usecnt = readl(ioc->ioc_regs.ioc_usage_reg); 126 127 /** 128 * If usage count is 0, always return TRUE. 129 */ 130 if (usecnt == 0) { 131 writel(1, ioc->ioc_regs.ioc_usage_reg); 132 bfa_nw_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg); 133 writel(0, ioc->ioc_regs.ioc_fail_sync); 134 return true; 135 } 136 137 ioc_fwstate = readl(ioc->ioc_regs.ioc_fwstate); 138 139 /** 140 * Use count cannot be non-zero and chip in uninitialized state. 141 */ 142 BUG_ON(!(ioc_fwstate != BFI_IOC_UNINIT)); 143 144 /** 145 * Check if another driver with a different firmware is active 146 */ 147 bfa_nw_ioc_fwver_get(ioc, &fwhdr); 148 if (!bfa_nw_ioc_fwver_cmp(ioc, &fwhdr)) { 149 bfa_nw_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg); 150 return false; 151 } 152 153 /** 154 * Same firmware version. Increment the reference count. 155 */ 156 usecnt++; 157 writel(usecnt, ioc->ioc_regs.ioc_usage_reg); 158 bfa_nw_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg); 159 return true; 160 } 161 162 static void 163 bfa_ioc_ct_firmware_unlock(struct bfa_ioc *ioc) 164 { 165 u32 usecnt; 166 167 /** 168 * If bios boot (flash based) -- do not decrement usage count 169 */ 170 if (bfa_cb_image_get_size(bfa_ioc_asic_gen(ioc)) < 171 BFA_IOC_FWIMG_MINSZ) 172 return; 173 174 /** 175 * decrement usage count 176 */ 177 bfa_nw_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg); 178 usecnt = readl(ioc->ioc_regs.ioc_usage_reg); 179 BUG_ON(!(usecnt > 0)); 180 181 usecnt--; 182 writel(usecnt, ioc->ioc_regs.ioc_usage_reg); 183 184 bfa_nw_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg); 185 } 186 187 /* Notify other functions on HB failure. */ 188 static void 189 bfa_ioc_ct_notify_fail(struct bfa_ioc *ioc) 190 { 191 writel(__FW_INIT_HALT_P, ioc->ioc_regs.ll_halt); 192 writel(__FW_INIT_HALT_P, ioc->ioc_regs.alt_ll_halt); 193 /* Wait for halt to take effect */ 194 readl(ioc->ioc_regs.ll_halt); 195 readl(ioc->ioc_regs.alt_ll_halt); 196 } 197 198 /* Host to LPU mailbox message addresses */ 199 static const struct { 200 u32 hfn_mbox; 201 u32 lpu_mbox; 202 u32 hfn_pgn; 203 } ct_fnreg[] = { 204 { HOSTFN0_LPU_MBOX0_0, LPU_HOSTFN0_MBOX0_0, HOST_PAGE_NUM_FN0 }, 205 { HOSTFN1_LPU_MBOX0_8, LPU_HOSTFN1_MBOX0_8, HOST_PAGE_NUM_FN1 }, 206 { HOSTFN2_LPU_MBOX0_0, LPU_HOSTFN2_MBOX0_0, HOST_PAGE_NUM_FN2 }, 207 { HOSTFN3_LPU_MBOX0_8, LPU_HOSTFN3_MBOX0_8, HOST_PAGE_NUM_FN3 } 208 }; 209 210 /* Host <-> LPU mailbox command/status registers - port 0 */ 211 static const struct { 212 u32 hfn; 213 u32 lpu; 214 } ct_p0reg[] = { 215 { HOSTFN0_LPU0_CMD_STAT, LPU0_HOSTFN0_CMD_STAT }, 216 { HOSTFN1_LPU0_CMD_STAT, LPU0_HOSTFN1_CMD_STAT }, 217 { HOSTFN2_LPU0_CMD_STAT, LPU0_HOSTFN2_CMD_STAT }, 218 { HOSTFN3_LPU0_CMD_STAT, LPU0_HOSTFN3_CMD_STAT } 219 }; 220 221 /* Host <-> LPU mailbox command/status registers - port 1 */ 222 static const struct { 223 u32 hfn; 224 u32 lpu; 225 } ct_p1reg[] = { 226 { HOSTFN0_LPU1_CMD_STAT, LPU1_HOSTFN0_CMD_STAT }, 227 { HOSTFN1_LPU1_CMD_STAT, LPU1_HOSTFN1_CMD_STAT }, 228 { HOSTFN2_LPU1_CMD_STAT, LPU1_HOSTFN2_CMD_STAT }, 229 { HOSTFN3_LPU1_CMD_STAT, LPU1_HOSTFN3_CMD_STAT } 230 }; 231 232 static const struct { 233 u32 hfn_mbox; 234 u32 lpu_mbox; 235 u32 hfn_pgn; 236 u32 hfn; 237 u32 lpu; 238 u32 lpu_read; 239 } ct2_reg[] = { 240 { CT2_HOSTFN_LPU0_MBOX0, CT2_LPU0_HOSTFN_MBOX0, CT2_HOSTFN_PAGE_NUM, 241 CT2_HOSTFN_LPU0_CMD_STAT, CT2_LPU0_HOSTFN_CMD_STAT, 242 CT2_HOSTFN_LPU0_READ_STAT}, 243 { CT2_HOSTFN_LPU1_MBOX0, CT2_LPU1_HOSTFN_MBOX0, CT2_HOSTFN_PAGE_NUM, 244 CT2_HOSTFN_LPU1_CMD_STAT, CT2_LPU1_HOSTFN_CMD_STAT, 245 CT2_HOSTFN_LPU1_READ_STAT}, 246 }; 247 248 static void 249 bfa_ioc_ct_reg_init(struct bfa_ioc *ioc) 250 { 251 void __iomem *rb; 252 int pcifn = bfa_ioc_pcifn(ioc); 253 254 rb = bfa_ioc_bar0(ioc); 255 256 ioc->ioc_regs.hfn_mbox = rb + ct_fnreg[pcifn].hfn_mbox; 257 ioc->ioc_regs.lpu_mbox = rb + ct_fnreg[pcifn].lpu_mbox; 258 ioc->ioc_regs.host_page_num_fn = rb + ct_fnreg[pcifn].hfn_pgn; 259 260 if (ioc->port_id == 0) { 261 ioc->ioc_regs.heartbeat = rb + BFA_IOC0_HBEAT_REG; 262 ioc->ioc_regs.ioc_fwstate = rb + BFA_IOC0_STATE_REG; 263 ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC1_STATE_REG; 264 ioc->ioc_regs.hfn_mbox_cmd = rb + ct_p0reg[pcifn].hfn; 265 ioc->ioc_regs.lpu_mbox_cmd = rb + ct_p0reg[pcifn].lpu; 266 ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P0; 267 ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P1; 268 } else { 269 ioc->ioc_regs.heartbeat = rb + BFA_IOC1_HBEAT_REG; 270 ioc->ioc_regs.ioc_fwstate = rb + BFA_IOC1_STATE_REG; 271 ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC0_STATE_REG; 272 ioc->ioc_regs.hfn_mbox_cmd = rb + ct_p1reg[pcifn].hfn; 273 ioc->ioc_regs.lpu_mbox_cmd = rb + ct_p1reg[pcifn].lpu; 274 ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P1; 275 ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P0; 276 } 277 278 /* 279 * PSS control registers 280 */ 281 ioc->ioc_regs.pss_ctl_reg = rb + PSS_CTL_REG; 282 ioc->ioc_regs.pss_err_status_reg = rb + PSS_ERR_STATUS_REG; 283 ioc->ioc_regs.app_pll_fast_ctl_reg = rb + APP_PLL_LCLK_CTL_REG; 284 ioc->ioc_regs.app_pll_slow_ctl_reg = rb + APP_PLL_SCLK_CTL_REG; 285 286 /* 287 * IOC semaphore registers and serialization 288 */ 289 ioc->ioc_regs.ioc_sem_reg = rb + HOST_SEM0_REG; 290 ioc->ioc_regs.ioc_usage_sem_reg = rb + HOST_SEM1_REG; 291 ioc->ioc_regs.ioc_init_sem_reg = rb + HOST_SEM2_REG; 292 ioc->ioc_regs.ioc_usage_reg = rb + BFA_FW_USE_COUNT; 293 ioc->ioc_regs.ioc_fail_sync = rb + BFA_IOC_FAIL_SYNC; 294 295 /** 296 * sram memory access 297 */ 298 ioc->ioc_regs.smem_page_start = rb + PSS_SMEM_PAGE_START; 299 ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CT; 300 301 /* 302 * err set reg : for notification of hb failure in fcmode 303 */ 304 ioc->ioc_regs.err_set = (rb + ERR_SET_REG); 305 } 306 307 static void 308 bfa_ioc_ct2_reg_init(struct bfa_ioc *ioc) 309 { 310 void __iomem *rb; 311 int port = bfa_ioc_portid(ioc); 312 313 rb = bfa_ioc_bar0(ioc); 314 315 ioc->ioc_regs.hfn_mbox = rb + ct2_reg[port].hfn_mbox; 316 ioc->ioc_regs.lpu_mbox = rb + ct2_reg[port].lpu_mbox; 317 ioc->ioc_regs.host_page_num_fn = rb + ct2_reg[port].hfn_pgn; 318 ioc->ioc_regs.hfn_mbox_cmd = rb + ct2_reg[port].hfn; 319 ioc->ioc_regs.lpu_mbox_cmd = rb + ct2_reg[port].lpu; 320 ioc->ioc_regs.lpu_read_stat = rb + ct2_reg[port].lpu_read; 321 322 if (port == 0) { 323 ioc->ioc_regs.heartbeat = rb + CT2_BFA_IOC0_HBEAT_REG; 324 ioc->ioc_regs.ioc_fwstate = rb + CT2_BFA_IOC0_STATE_REG; 325 ioc->ioc_regs.alt_ioc_fwstate = rb + CT2_BFA_IOC1_STATE_REG; 326 ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P0; 327 ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P1; 328 } else { 329 ioc->ioc_regs.heartbeat = rb + CT2_BFA_IOC1_HBEAT_REG; 330 ioc->ioc_regs.ioc_fwstate = rb + CT2_BFA_IOC1_STATE_REG; 331 ioc->ioc_regs.alt_ioc_fwstate = rb + CT2_BFA_IOC0_STATE_REG; 332 ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P1; 333 ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P0; 334 } 335 336 /* 337 * PSS control registers 338 */ 339 ioc->ioc_regs.pss_ctl_reg = rb + PSS_CTL_REG; 340 ioc->ioc_regs.pss_err_status_reg = rb + PSS_ERR_STATUS_REG; 341 ioc->ioc_regs.app_pll_fast_ctl_reg = rb + CT2_APP_PLL_LCLK_CTL_REG; 342 ioc->ioc_regs.app_pll_slow_ctl_reg = rb + CT2_APP_PLL_SCLK_CTL_REG; 343 344 /* 345 * IOC semaphore registers and serialization 346 */ 347 ioc->ioc_regs.ioc_sem_reg = rb + CT2_HOST_SEM0_REG; 348 ioc->ioc_regs.ioc_usage_sem_reg = rb + CT2_HOST_SEM1_REG; 349 ioc->ioc_regs.ioc_init_sem_reg = rb + CT2_HOST_SEM2_REG; 350 ioc->ioc_regs.ioc_usage_reg = rb + CT2_BFA_FW_USE_COUNT; 351 ioc->ioc_regs.ioc_fail_sync = rb + CT2_BFA_IOC_FAIL_SYNC; 352 353 /** 354 * sram memory access 355 */ 356 ioc->ioc_regs.smem_page_start = rb + PSS_SMEM_PAGE_START; 357 ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CT; 358 359 /* 360 * err set reg : for notification of hb failure in fcmode 361 */ 362 ioc->ioc_regs.err_set = rb + ERR_SET_REG; 363 } 364 365 /* Initialize IOC to port mapping. */ 366 367 #define FNC_PERS_FN_SHIFT(__fn) ((__fn) * 8) 368 static void 369 bfa_ioc_ct_map_port(struct bfa_ioc *ioc) 370 { 371 void __iomem *rb = ioc->pcidev.pci_bar_kva; 372 u32 r32; 373 374 /** 375 * For catapult, base port id on personality register and IOC type 376 */ 377 r32 = readl(rb + FNC_PERS_REG); 378 r32 >>= FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc)); 379 ioc->port_id = (r32 & __F0_PORT_MAP_MK) >> __F0_PORT_MAP_SH; 380 381 } 382 383 static void 384 bfa_ioc_ct2_map_port(struct bfa_ioc *ioc) 385 { 386 void __iomem *rb = ioc->pcidev.pci_bar_kva; 387 u32 r32; 388 389 r32 = readl(rb + CT2_HOSTFN_PERSONALITY0); 390 ioc->port_id = ((r32 & __FC_LL_PORT_MAP__MK) >> __FC_LL_PORT_MAP__SH); 391 } 392 393 /* Set interrupt mode for a function: INTX or MSIX */ 394 static void 395 bfa_ioc_ct_isr_mode_set(struct bfa_ioc *ioc, bool msix) 396 { 397 void __iomem *rb = ioc->pcidev.pci_bar_kva; 398 u32 r32, mode; 399 400 r32 = readl(rb + FNC_PERS_REG); 401 402 mode = (r32 >> FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc))) & 403 __F0_INTX_STATUS; 404 405 /** 406 * If already in desired mode, do not change anything 407 */ 408 if ((!msix && mode) || (msix && !mode)) 409 return; 410 411 if (msix) 412 mode = __F0_INTX_STATUS_MSIX; 413 else 414 mode = __F0_INTX_STATUS_INTA; 415 416 r32 &= ~(__F0_INTX_STATUS << FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc))); 417 r32 |= (mode << FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc))); 418 419 writel(r32, rb + FNC_PERS_REG); 420 } 421 422 static bool 423 bfa_ioc_ct2_lpu_read_stat(struct bfa_ioc *ioc) 424 { 425 u32 r32; 426 427 r32 = readl(ioc->ioc_regs.lpu_read_stat); 428 if (r32) { 429 writel(1, ioc->ioc_regs.lpu_read_stat); 430 return true; 431 } 432 433 return false; 434 } 435 436 /* MSI-X resource allocation for 1860 with no asic block */ 437 #define HOSTFN_MSIX_DEFAULT 64 438 #define HOSTFN_MSIX_VT_INDEX_MBOX_ERR 0x30138 439 #define HOSTFN_MSIX_VT_OFST_NUMVT 0x3013c 440 #define __MSIX_VT_NUMVT__MK 0x003ff800 441 #define __MSIX_VT_NUMVT__SH 11 442 #define __MSIX_VT_NUMVT_(_v) ((_v) << __MSIX_VT_NUMVT__SH) 443 #define __MSIX_VT_OFST_ 0x000007ff 444 void 445 bfa_nw_ioc_ct2_poweron(struct bfa_ioc *ioc) 446 { 447 void __iomem *rb = ioc->pcidev.pci_bar_kva; 448 u32 r32; 449 450 r32 = readl(rb + HOSTFN_MSIX_VT_OFST_NUMVT); 451 if (r32 & __MSIX_VT_NUMVT__MK) { 452 writel(r32 & __MSIX_VT_OFST_, 453 rb + HOSTFN_MSIX_VT_INDEX_MBOX_ERR); 454 return; 455 } 456 457 writel(__MSIX_VT_NUMVT_(HOSTFN_MSIX_DEFAULT - 1) | 458 HOSTFN_MSIX_DEFAULT * bfa_ioc_pcifn(ioc), 459 rb + HOSTFN_MSIX_VT_OFST_NUMVT); 460 writel(HOSTFN_MSIX_DEFAULT * bfa_ioc_pcifn(ioc), 461 rb + HOSTFN_MSIX_VT_INDEX_MBOX_ERR); 462 } 463 464 /* Cleanup hw semaphore and usecnt registers */ 465 static void 466 bfa_ioc_ct_ownership_reset(struct bfa_ioc *ioc) 467 { 468 bfa_nw_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg); 469 writel(0, ioc->ioc_regs.ioc_usage_reg); 470 bfa_nw_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg); 471 472 /* 473 * Read the hw sem reg to make sure that it is locked 474 * before we clear it. If it is not locked, writing 1 475 * will lock it instead of clearing it. 476 */ 477 readl(ioc->ioc_regs.ioc_sem_reg); 478 bfa_nw_ioc_hw_sem_release(ioc); 479 } 480 481 /* Synchronized IOC failure processing routines */ 482 static bool 483 bfa_ioc_ct_sync_start(struct bfa_ioc *ioc) 484 { 485 u32 r32 = readl(ioc->ioc_regs.ioc_fail_sync); 486 u32 sync_reqd = bfa_ioc_ct_get_sync_reqd(r32); 487 488 /* 489 * Driver load time. If the sync required bit for this PCI fn 490 * is set, it is due to an unclean exit by the driver for this 491 * PCI fn in the previous incarnation. Whoever comes here first 492 * should clean it up, no matter which PCI fn. 493 */ 494 495 if (sync_reqd & bfa_ioc_ct_sync_pos(ioc)) { 496 writel(0, ioc->ioc_regs.ioc_fail_sync); 497 writel(1, ioc->ioc_regs.ioc_usage_reg); 498 writel(BFI_IOC_UNINIT, ioc->ioc_regs.ioc_fwstate); 499 writel(BFI_IOC_UNINIT, ioc->ioc_regs.alt_ioc_fwstate); 500 return true; 501 } 502 503 return bfa_ioc_ct_sync_complete(ioc); 504 } 505 /* Synchronized IOC failure processing routines */ 506 static void 507 bfa_ioc_ct_sync_join(struct bfa_ioc *ioc) 508 { 509 u32 r32 = readl(ioc->ioc_regs.ioc_fail_sync); 510 u32 sync_pos = bfa_ioc_ct_sync_reqd_pos(ioc); 511 512 writel((r32 | sync_pos), ioc->ioc_regs.ioc_fail_sync); 513 } 514 515 static void 516 bfa_ioc_ct_sync_leave(struct bfa_ioc *ioc) 517 { 518 u32 r32 = readl(ioc->ioc_regs.ioc_fail_sync); 519 u32 sync_msk = bfa_ioc_ct_sync_reqd_pos(ioc) | 520 bfa_ioc_ct_sync_pos(ioc); 521 522 writel((r32 & ~sync_msk), ioc->ioc_regs.ioc_fail_sync); 523 } 524 525 static void 526 bfa_ioc_ct_sync_ack(struct bfa_ioc *ioc) 527 { 528 u32 r32 = readl(ioc->ioc_regs.ioc_fail_sync); 529 530 writel(r32 | bfa_ioc_ct_sync_pos(ioc), ioc->ioc_regs.ioc_fail_sync); 531 } 532 533 static bool 534 bfa_ioc_ct_sync_complete(struct bfa_ioc *ioc) 535 { 536 u32 r32 = readl(ioc->ioc_regs.ioc_fail_sync); 537 u32 sync_reqd = bfa_ioc_ct_get_sync_reqd(r32); 538 u32 sync_ackd = bfa_ioc_ct_get_sync_ackd(r32); 539 u32 tmp_ackd; 540 541 if (sync_ackd == 0) 542 return true; 543 544 /** 545 * The check below is to see whether any other PCI fn 546 * has reinitialized the ASIC (reset sync_ackd bits) 547 * and failed again while this IOC was waiting for hw 548 * semaphore (in bfa_iocpf_sm_semwait()). 549 */ 550 tmp_ackd = sync_ackd; 551 if ((sync_reqd & bfa_ioc_ct_sync_pos(ioc)) && 552 !(sync_ackd & bfa_ioc_ct_sync_pos(ioc))) 553 sync_ackd |= bfa_ioc_ct_sync_pos(ioc); 554 555 if (sync_reqd == sync_ackd) { 556 writel(bfa_ioc_ct_clear_sync_ackd(r32), 557 ioc->ioc_regs.ioc_fail_sync); 558 writel(BFI_IOC_FAIL, ioc->ioc_regs.ioc_fwstate); 559 writel(BFI_IOC_FAIL, ioc->ioc_regs.alt_ioc_fwstate); 560 return true; 561 } 562 563 /** 564 * If another PCI fn reinitialized and failed again while 565 * this IOC was waiting for hw sem, the sync_ackd bit for 566 * this IOC need to be set again to allow reinitialization. 567 */ 568 if (tmp_ackd != sync_ackd) 569 writel((r32 | sync_ackd), ioc->ioc_regs.ioc_fail_sync); 570 571 return false; 572 } 573 574 static void 575 bfa_ioc_ct_set_cur_ioc_fwstate(struct bfa_ioc *ioc, 576 enum bfi_ioc_state fwstate) 577 { 578 writel(fwstate, ioc->ioc_regs.ioc_fwstate); 579 } 580 581 static enum bfi_ioc_state 582 bfa_ioc_ct_get_cur_ioc_fwstate(struct bfa_ioc *ioc) 583 { 584 return (enum bfi_ioc_state)readl(ioc->ioc_regs.ioc_fwstate); 585 } 586 587 static void 588 bfa_ioc_ct_set_alt_ioc_fwstate(struct bfa_ioc *ioc, 589 enum bfi_ioc_state fwstate) 590 { 591 writel(fwstate, ioc->ioc_regs.alt_ioc_fwstate); 592 } 593 594 static enum bfi_ioc_state 595 bfa_ioc_ct_get_alt_ioc_fwstate(struct bfa_ioc *ioc) 596 { 597 return (enum bfi_ioc_state)readl(ioc->ioc_regs.alt_ioc_fwstate); 598 } 599 600 static enum bfa_status 601 bfa_ioc_ct_pll_init(void __iomem *rb, enum bfi_asic_mode asic_mode) 602 { 603 u32 pll_sclk, pll_fclk, r32; 604 bool fcmode = (asic_mode == BFI_ASIC_MODE_FC); 605 606 pll_sclk = __APP_PLL_SCLK_LRESETN | __APP_PLL_SCLK_ENARST | 607 __APP_PLL_SCLK_RSEL200500 | __APP_PLL_SCLK_P0_1(3U) | 608 __APP_PLL_SCLK_JITLMT0_1(3U) | 609 __APP_PLL_SCLK_CNTLMT0_1(1U); 610 pll_fclk = __APP_PLL_LCLK_LRESETN | __APP_PLL_LCLK_ENARST | 611 __APP_PLL_LCLK_RSEL200500 | __APP_PLL_LCLK_P0_1(3U) | 612 __APP_PLL_LCLK_JITLMT0_1(3U) | 613 __APP_PLL_LCLK_CNTLMT0_1(1U); 614 615 if (fcmode) { 616 writel(0, (rb + OP_MODE)); 617 writel(__APP_EMS_CMLCKSEL | 618 __APP_EMS_REFCKBUFEN2 | 619 __APP_EMS_CHANNEL_SEL, 620 (rb + ETH_MAC_SER_REG)); 621 } else { 622 writel(__GLOBAL_FCOE_MODE, (rb + OP_MODE)); 623 writel(__APP_EMS_REFCKBUFEN1, 624 (rb + ETH_MAC_SER_REG)); 625 } 626 writel(BFI_IOC_UNINIT, (rb + BFA_IOC0_STATE_REG)); 627 writel(BFI_IOC_UNINIT, (rb + BFA_IOC1_STATE_REG)); 628 writel(0xffffffffU, (rb + HOSTFN0_INT_MSK)); 629 writel(0xffffffffU, (rb + HOSTFN1_INT_MSK)); 630 writel(0xffffffffU, (rb + HOSTFN0_INT_STATUS)); 631 writel(0xffffffffU, (rb + HOSTFN1_INT_STATUS)); 632 writel(0xffffffffU, (rb + HOSTFN0_INT_MSK)); 633 writel(0xffffffffU, (rb + HOSTFN1_INT_MSK)); 634 writel(pll_sclk | 635 __APP_PLL_SCLK_LOGIC_SOFT_RESET, 636 rb + APP_PLL_SCLK_CTL_REG); 637 writel(pll_fclk | 638 __APP_PLL_LCLK_LOGIC_SOFT_RESET, 639 rb + APP_PLL_LCLK_CTL_REG); 640 writel(pll_sclk | 641 __APP_PLL_SCLK_LOGIC_SOFT_RESET | __APP_PLL_SCLK_ENABLE, 642 rb + APP_PLL_SCLK_CTL_REG); 643 writel(pll_fclk | 644 __APP_PLL_LCLK_LOGIC_SOFT_RESET | __APP_PLL_LCLK_ENABLE, 645 rb + APP_PLL_LCLK_CTL_REG); 646 readl(rb + HOSTFN0_INT_MSK); 647 udelay(2000); 648 writel(0xffffffffU, (rb + HOSTFN0_INT_STATUS)); 649 writel(0xffffffffU, (rb + HOSTFN1_INT_STATUS)); 650 writel(pll_sclk | 651 __APP_PLL_SCLK_ENABLE, 652 rb + APP_PLL_SCLK_CTL_REG); 653 writel(pll_fclk | 654 __APP_PLL_LCLK_ENABLE, 655 rb + APP_PLL_LCLK_CTL_REG); 656 657 if (!fcmode) { 658 writel(__PMM_1T_RESET_P, (rb + PMM_1T_RESET_REG_P0)); 659 writel(__PMM_1T_RESET_P, (rb + PMM_1T_RESET_REG_P1)); 660 } 661 r32 = readl(rb + PSS_CTL_REG); 662 r32 &= ~__PSS_LMEM_RESET; 663 writel(r32, (rb + PSS_CTL_REG)); 664 udelay(1000); 665 if (!fcmode) { 666 writel(0, (rb + PMM_1T_RESET_REG_P0)); 667 writel(0, (rb + PMM_1T_RESET_REG_P1)); 668 } 669 670 writel(__EDRAM_BISTR_START, (rb + MBIST_CTL_REG)); 671 udelay(1000); 672 r32 = readl(rb + MBIST_STAT_REG); 673 writel(0, (rb + MBIST_CTL_REG)); 674 return BFA_STATUS_OK; 675 } 676 677 static void 678 bfa_ioc_ct2_sclk_init(void __iomem *rb) 679 { 680 u32 r32; 681 682 /* 683 * put s_clk PLL and PLL FSM in reset 684 */ 685 r32 = readl(rb + CT2_APP_PLL_SCLK_CTL_REG); 686 r32 &= ~(__APP_PLL_SCLK_ENABLE | __APP_PLL_SCLK_LRESETN); 687 r32 |= (__APP_PLL_SCLK_ENARST | __APP_PLL_SCLK_BYPASS | 688 __APP_PLL_SCLK_LOGIC_SOFT_RESET); 689 writel(r32, (rb + CT2_APP_PLL_SCLK_CTL_REG)); 690 691 /* 692 * Ignore mode and program for the max clock (which is FC16) 693 * Firmware/NFC will do the PLL init appropriately 694 */ 695 r32 = readl(rb + CT2_APP_PLL_SCLK_CTL_REG); 696 r32 &= ~(__APP_PLL_SCLK_REFCLK_SEL | __APP_PLL_SCLK_CLK_DIV2); 697 writel(r32, (rb + CT2_APP_PLL_SCLK_CTL_REG)); 698 699 /* 700 * while doing PLL init dont clock gate ethernet subsystem 701 */ 702 r32 = readl(rb + CT2_CHIP_MISC_PRG); 703 writel(r32 | __ETH_CLK_ENABLE_PORT0, 704 rb + CT2_CHIP_MISC_PRG); 705 706 r32 = readl(rb + CT2_PCIE_MISC_REG); 707 writel(r32 | __ETH_CLK_ENABLE_PORT1, 708 rb + CT2_PCIE_MISC_REG); 709 710 /* 711 * set sclk value 712 */ 713 r32 = readl(rb + CT2_APP_PLL_SCLK_CTL_REG); 714 r32 &= (__P_SCLK_PLL_LOCK | __APP_PLL_SCLK_REFCLK_SEL | 715 __APP_PLL_SCLK_CLK_DIV2); 716 writel(r32 | 0x1061731b, rb + CT2_APP_PLL_SCLK_CTL_REG); 717 718 /* 719 * poll for s_clk lock or delay 1ms 720 */ 721 udelay(1000); 722 723 /* 724 * Dont do clock gating for ethernet subsystem, firmware/NFC will 725 * do this appropriately 726 */ 727 } 728 729 static void 730 bfa_ioc_ct2_lclk_init(void __iomem *rb) 731 { 732 u32 r32; 733 734 /* 735 * put l_clk PLL and PLL FSM in reset 736 */ 737 r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); 738 r32 &= ~(__APP_PLL_LCLK_ENABLE | __APP_PLL_LCLK_LRESETN); 739 r32 |= (__APP_PLL_LCLK_ENARST | __APP_PLL_LCLK_BYPASS | 740 __APP_PLL_LCLK_LOGIC_SOFT_RESET); 741 writel(r32, rb + CT2_APP_PLL_LCLK_CTL_REG); 742 743 /* 744 * set LPU speed (set for FC16 which will work for other modes) 745 */ 746 r32 = readl(rb + CT2_CHIP_MISC_PRG); 747 writel(r32, (rb + CT2_CHIP_MISC_PRG)); 748 749 /* 750 * set LPU half speed (set for FC16 which will work for other modes) 751 */ 752 r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); 753 writel(r32, rb + CT2_APP_PLL_LCLK_CTL_REG); 754 755 /* 756 * set lclk for mode (set for FC16) 757 */ 758 r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); 759 r32 &= (__P_LCLK_PLL_LOCK | __APP_LPUCLK_HALFSPEED); 760 r32 |= 0x20c1731b; 761 writel(r32, (rb + CT2_APP_PLL_LCLK_CTL_REG)); 762 763 /* 764 * poll for s_clk lock or delay 1ms 765 */ 766 udelay(1000); 767 } 768 769 static void 770 bfa_ioc_ct2_mem_init(void __iomem *rb) 771 { 772 u32 r32; 773 774 r32 = readl(rb + PSS_CTL_REG); 775 r32 &= ~__PSS_LMEM_RESET; 776 writel(r32, rb + PSS_CTL_REG); 777 udelay(1000); 778 779 writel(__EDRAM_BISTR_START, rb + CT2_MBIST_CTL_REG); 780 udelay(1000); 781 writel(0, rb + CT2_MBIST_CTL_REG); 782 } 783 784 static void 785 bfa_ioc_ct2_mac_reset(void __iomem *rb) 786 { 787 volatile u32 r32; 788 789 bfa_ioc_ct2_sclk_init(rb); 790 bfa_ioc_ct2_lclk_init(rb); 791 792 /* 793 * release soft reset on s_clk & l_clk 794 */ 795 r32 = readl(rb + CT2_APP_PLL_SCLK_CTL_REG); 796 writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET, 797 rb + CT2_APP_PLL_SCLK_CTL_REG); 798 799 /* 800 * release soft reset on s_clk & l_clk 801 */ 802 r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); 803 writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET, 804 rb + CT2_APP_PLL_LCLK_CTL_REG); 805 806 /* put port0, port1 MAC & AHB in reset */ 807 writel(__CSI_MAC_RESET | __CSI_MAC_AHB_RESET, 808 rb + CT2_CSI_MAC_CONTROL_REG(0)); 809 writel(__CSI_MAC_RESET | __CSI_MAC_AHB_RESET, 810 rb + CT2_CSI_MAC_CONTROL_REG(1)); 811 } 812 813 #define CT2_NFC_MAX_DELAY 1000 814 #define CT2_NFC_VER_VALID 0x143 815 #define BFA_IOC_PLL_POLL 1000000 816 817 static bool 818 bfa_ioc_ct2_nfc_halted(void __iomem *rb) 819 { 820 volatile u32 r32; 821 822 r32 = readl(rb + CT2_NFC_CSR_SET_REG); 823 if (r32 & __NFC_CONTROLLER_HALTED) 824 return true; 825 826 return false; 827 } 828 829 static void 830 bfa_ioc_ct2_nfc_resume(void __iomem *rb) 831 { 832 volatile u32 r32; 833 int i; 834 835 writel(__HALT_NFC_CONTROLLER, rb + CT2_NFC_CSR_CLR_REG); 836 for (i = 0; i < CT2_NFC_MAX_DELAY; i++) { 837 r32 = readl(rb + CT2_NFC_CSR_SET_REG); 838 if (!(r32 & __NFC_CONTROLLER_HALTED)) 839 return; 840 udelay(1000); 841 } 842 BUG_ON(1); 843 } 844 845 static enum bfa_status 846 bfa_ioc_ct2_pll_init(void __iomem *rb, enum bfi_asic_mode asic_mode) 847 { 848 volatile u32 wgn, r32; 849 u32 nfc_ver, i; 850 851 wgn = readl(rb + CT2_WGN_STATUS); 852 853 nfc_ver = readl(rb + CT2_RSC_GPR15_REG); 854 855 if (wgn == (__A2T_AHB_LOAD | __WGN_READY) && 856 nfc_ver >= CT2_NFC_VER_VALID) { 857 if (bfa_ioc_ct2_nfc_halted(rb)) 858 bfa_ioc_ct2_nfc_resume(rb); 859 writel(__RESET_AND_START_SCLK_LCLK_PLLS, 860 rb + CT2_CSI_FW_CTL_SET_REG); 861 862 for (i = 0; i < BFA_IOC_PLL_POLL; i++) { 863 r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); 864 if (r32 & __RESET_AND_START_SCLK_LCLK_PLLS) 865 break; 866 } 867 BUG_ON(!(r32 & __RESET_AND_START_SCLK_LCLK_PLLS)); 868 869 for (i = 0; i < BFA_IOC_PLL_POLL; i++) { 870 r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); 871 if (!(r32 & __RESET_AND_START_SCLK_LCLK_PLLS)) 872 break; 873 } 874 BUG_ON(r32 & __RESET_AND_START_SCLK_LCLK_PLLS); 875 udelay(1000); 876 877 r32 = readl(rb + CT2_CSI_FW_CTL_REG); 878 BUG_ON(r32 & __RESET_AND_START_SCLK_LCLK_PLLS); 879 } else { 880 writel(__HALT_NFC_CONTROLLER, (rb + CT2_NFC_CSR_SET_REG)); 881 for (i = 0; i < CT2_NFC_MAX_DELAY; i++) { 882 r32 = readl(rb + CT2_NFC_CSR_SET_REG); 883 if (r32 & __NFC_CONTROLLER_HALTED) 884 break; 885 udelay(1000); 886 } 887 888 bfa_ioc_ct2_mac_reset(rb); 889 bfa_ioc_ct2_sclk_init(rb); 890 bfa_ioc_ct2_lclk_init(rb); 891 892 /* release soft reset on s_clk & l_clk */ 893 r32 = readl(rb + CT2_APP_PLL_SCLK_CTL_REG); 894 writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET, 895 rb + CT2_APP_PLL_SCLK_CTL_REG); 896 r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); 897 writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET, 898 rb + CT2_APP_PLL_LCLK_CTL_REG); 899 } 900 901 /* Announce flash device presence, if flash was corrupted. */ 902 if (wgn == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) { 903 r32 = readl(rb + PSS_GPIO_OUT_REG); 904 writel(r32 & ~1, rb + PSS_GPIO_OUT_REG); 905 r32 = readl(rb + PSS_GPIO_OE_REG); 906 writel(r32 | 1, rb + PSS_GPIO_OE_REG); 907 } 908 909 /* 910 * Mask the interrupts and clear any 911 * pending interrupts left by BIOS/EFI 912 */ 913 writel(1, rb + CT2_LPU0_HOSTFN_MBOX0_MSK); 914 writel(1, rb + CT2_LPU1_HOSTFN_MBOX0_MSK); 915 916 /* For first time initialization, no need to clear interrupts */ 917 r32 = readl(rb + HOST_SEM5_REG); 918 if (r32 & 0x1) { 919 r32 = readl(rb + CT2_LPU0_HOSTFN_CMD_STAT); 920 if (r32 == 1) { 921 writel(1, rb + CT2_LPU0_HOSTFN_CMD_STAT); 922 readl(rb + CT2_LPU0_HOSTFN_CMD_STAT); 923 } 924 r32 = readl(rb + CT2_LPU1_HOSTFN_CMD_STAT); 925 if (r32 == 1) { 926 writel(1, rb + CT2_LPU1_HOSTFN_CMD_STAT); 927 readl(rb + CT2_LPU1_HOSTFN_CMD_STAT); 928 } 929 } 930 931 bfa_ioc_ct2_mem_init(rb); 932 933 writel(BFI_IOC_UNINIT, rb + CT2_BFA_IOC0_STATE_REG); 934 writel(BFI_IOC_UNINIT, rb + CT2_BFA_IOC1_STATE_REG); 935 return BFA_STATUS_OK; 936 } 937