1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Broadcom device configuration 4# 5 6config NET_VENDOR_BROADCOM 7 bool "Broadcom devices" 8 default y 9 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \ 10 SIBYTE_SB1xxx_SOC 11 help 12 If you have a network (Ethernet) chipset belonging to this class, 13 say Y. 14 15 Note that the answer to this question does not directly affect 16 the kernel: saying N will just cause the configurator to skip all 17 the questions regarding Broadcom chipsets. If you say Y, you will 18 be asked for your specific chipset/driver in the following questions. 19 20if NET_VENDOR_BROADCOM 21 22config B44 23 tristate "Broadcom 440x/47xx ethernet support" 24 depends on SSB_POSSIBLE && HAS_DMA 25 select SSB 26 select MII 27 select PHYLIB 28 help 29 If you have a network (Ethernet) controller of this type, say Y 30 or M here. 31 32 To compile this driver as a module, choose M here. The module 33 will be called b44. 34 35# Auto-select SSB PCI-HOST support, if possible 36config B44_PCI_AUTOSELECT 37 bool 38 depends on B44 && SSB_PCIHOST_POSSIBLE 39 select SSB_PCIHOST 40 default y 41 42# Auto-select SSB PCICORE driver, if possible 43config B44_PCICORE_AUTOSELECT 44 bool 45 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE 46 select SSB_DRIVER_PCICORE 47 default y 48 49config B44_PCI 50 bool 51 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT 52 default y 53 54config BCM63XX_ENET 55 tristate "Broadcom 63xx internal mac support" 56 depends on BCM63XX 57 select MII 58 select PHYLIB 59 help 60 This driver supports the ethernet MACs in the Broadcom 63xx 61 MIPS chipset family (BCM63XX). 62 63config BCMGENET 64 tristate "Broadcom GENET internal MAC support" 65 depends on HAS_IOMEM 66 select MII 67 select PHYLIB 68 select FIXED_PHY 69 select BCM7XXX_PHY 70 select MDIO_BCM_UNIMAC 71 select DIMLIB 72 select BROADCOM_PHY if ARCH_BCM2835 73 help 74 This driver supports the built-in Ethernet MACs found in the 75 Broadcom BCM7xxx Set Top Box family chipset. 76 77config BNX2 78 tristate "QLogic bnx2 support" 79 depends on PCI 80 select CRC32 81 select FW_LOADER 82 help 83 This driver supports QLogic bnx2 gigabit Ethernet cards. 84 85 To compile this driver as a module, choose M here: the module 86 will be called bnx2. This is recommended. 87 88config CNIC 89 tristate "QLogic CNIC support" 90 depends on PCI && (IPV6 || IPV6=n) 91 depends on MMU 92 select BNX2 93 select UIO 94 help 95 This driver supports offload features of QLogic bnx2 gigabit 96 Ethernet cards. 97 98 To compile this driver as a module, choose M here: the module 99 will be called cnic. This is recommended. 100 101config SB1250_MAC 102 tristate "SB1250 Gigabit Ethernet support" 103 depends on SIBYTE_SB1xxx_SOC 104 select PHYLIB 105 help 106 This driver supports Gigabit Ethernet interfaces based on the 107 Broadcom SiByte family of System-On-a-Chip parts. They include 108 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455 109 and BCM1480 chips. 110 111 To compile this driver as a module, choose M here: the module 112 will be called sb1250-mac. 113 114config TIGON3 115 tristate "Broadcom Tigon3 support" 116 depends on PCI 117 select PHYLIB 118 imply PTP_1588_CLOCK 119 help 120 This driver supports Broadcom Tigon3 based gigabit Ethernet cards. 121 122 To compile this driver as a module, choose M here: the module 123 will be called tg3. This is recommended. 124 125config TIGON3_HWMON 126 bool "Broadcom Tigon3 HWMON support" 127 default y 128 depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m) 129 help 130 Say Y if you want to expose the thermal sensor on Tigon3 devices. 131 132config BNX2X 133 tristate "Broadcom NetXtremeII 10Gb support" 134 depends on PCI 135 imply PTP_1588_CLOCK 136 select FW_LOADER 137 select ZLIB_INFLATE 138 select LIBCRC32C 139 select MDIO 140 help 141 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. 142 To compile this driver as a module, choose M here: the module 143 will be called bnx2x. This is recommended. 144 145config BNX2X_SRIOV 146 bool "Broadcom 578xx and 57712 SR-IOV support" 147 depends on BNX2X && PCI_IOV 148 default y 149 help 150 This configuration parameter enables Single Root Input Output 151 Virtualization support in the 578xx and 57712 products. This 152 allows for virtual function acceleration in virtual environments. 153 154config BGMAC 155 tristate 156 help 157 This enables the integrated ethernet controller support for many 158 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver 159 needs to be enabled to select this. 160 161config BGMAC_BCMA 162 tristate "Broadcom iProc GBit BCMA support" 163 depends on BCMA && BCMA_HOST_SOC 164 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST 165 select BGMAC 166 select PHYLIB 167 select FIXED_PHY 168 help 169 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. 170 They can be found on BCM47xx SoCs and provide gigabit ethernet. 171 In case of using this driver on BCM4706 it's also requires to enable 172 BCMA_DRIVER_GMAC_CMN to make it work. 173 174config BGMAC_PLATFORM 175 tristate "Broadcom iProc GBit platform support" 176 depends on ARCH_BCM_IPROC || COMPILE_TEST 177 select BGMAC 178 select PHYLIB 179 select FIXED_PHY 180 default ARCH_BCM_IPROC 181 help 182 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet 183 controller through the generic platform interface 184 185config SYSTEMPORT 186 tristate "Broadcom SYSTEMPORT internal MAC support" 187 depends on HAS_IOMEM 188 depends on NET_DSA || !NET_DSA 189 select MII 190 select PHYLIB 191 select FIXED_PHY 192 select DIMLIB 193 help 194 This driver supports the built-in Ethernet MACs found in the 195 Broadcom BCM7xxx Set Top Box family chipset using an internal 196 Ethernet switch. 197 198config BNXT 199 tristate "Broadcom NetXtreme-C/E support" 200 depends on PCI 201 select FW_LOADER 202 select LIBCRC32C 203 select NET_DEVLINK 204 select PAGE_POOL 205 select DIMLIB 206 help 207 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit 208 Ethernet cards. To compile this driver as a module, choose M here: 209 the module will be called bnxt_en. This is recommended. 210 211config BNXT_SRIOV 212 bool "Broadcom NetXtreme-C/E SR-IOV support" 213 depends on BNXT && PCI_IOV 214 default y 215 help 216 This configuration parameter enables Single Root Input Output 217 Virtualization support in the NetXtreme-C/E products. This 218 allows for virtual function acceleration in virtual environments. 219 220config BNXT_FLOWER_OFFLOAD 221 bool "TC Flower offload support for NetXtreme-C/E" 222 depends on BNXT 223 default y 224 help 225 This configuration parameter enables TC Flower packet classifier 226 offload for eswitch. This option enables SR-IOV switchdev eswitch 227 offload. 228 229config BNXT_DCB 230 bool "Data Center Bridging (DCB) Support" 231 default n 232 depends on BNXT && DCB 233 help 234 Say Y here if you want to use Data Center Bridging (DCB) in the 235 driver. 236 237 If unsure, say N. 238 239config BNXT_HWMON 240 bool "Broadcom NetXtreme-C/E HWMON support" 241 default y 242 depends on BNXT && HWMON && !(BNXT=y && HWMON=m) 243 help 244 Say Y if you want to expose the thermal sensor data on NetXtreme-C/E 245 devices, via the hwmon sysfs interface. 246 247endif # NET_VENDOR_BROADCOM 248