1# 2# Broadcom device configuration 3# 4 5config NET_VENDOR_BROADCOM 6 bool "Broadcom devices" 7 default y 8 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \ 9 SIBYTE_SB1xxx_SOC 10 ---help--- 11 If you have a network (Ethernet) chipset belonging to this class, 12 say Y. 13 14 Note that the answer to this question does not directly affect 15 the kernel: saying N will just case the configurator to skip all 16 the questions regarding AMD chipsets. If you say Y, you will be asked 17 for your specific chipset/driver in the following questions. 18 19if NET_VENDOR_BROADCOM 20 21config B44 22 tristate "Broadcom 440x/47xx ethernet support" 23 depends on SSB_POSSIBLE && HAS_DMA 24 select SSB 25 select MII 26 select PHYLIB 27 ---help--- 28 If you have a network (Ethernet) controller of this type, say Y 29 or M here. 30 31 To compile this driver as a module, choose M here. The module 32 will be called b44. 33 34# Auto-select SSB PCI-HOST support, if possible 35config B44_PCI_AUTOSELECT 36 bool 37 depends on B44 && SSB_PCIHOST_POSSIBLE 38 select SSB_PCIHOST 39 default y 40 41# Auto-select SSB PCICORE driver, if possible 42config B44_PCICORE_AUTOSELECT 43 bool 44 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE 45 select SSB_DRIVER_PCICORE 46 default y 47 48config B44_PCI 49 bool 50 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT 51 default y 52 53config BCM63XX_ENET 54 tristate "Broadcom 63xx internal mac support" 55 depends on BCM63XX 56 select MII 57 select PHYLIB 58 help 59 This driver supports the ethernet MACs in the Broadcom 63xx 60 MIPS chipset family (BCM63XX). 61 62config BCMGENET 63 tristate "Broadcom GENET internal MAC support" 64 depends on HAS_IOMEM 65 select MII 66 select PHYLIB 67 select FIXED_PHY 68 select BCM7XXX_PHY 69 select MDIO_BCM_UNIMAC 70 help 71 This driver supports the built-in Ethernet MACs found in the 72 Broadcom BCM7xxx Set Top Box family chipset. 73 74config BNX2 75 tristate "QLogic bnx2 support" 76 depends on PCI 77 select CRC32 78 select FW_LOADER 79 ---help--- 80 This driver supports QLogic bnx2 gigabit Ethernet cards. 81 82 To compile this driver as a module, choose M here: the module 83 will be called bnx2. This is recommended. 84 85config CNIC 86 tristate "QLogic CNIC support" 87 depends on PCI && (IPV6 || IPV6=n) 88 select BNX2 89 select UIO 90 ---help--- 91 This driver supports offload features of QLogic bnx2 gigabit 92 Ethernet cards. 93 94 To compile this driver as a module, choose M here: the module 95 will be called cnic. This is recommended. 96 97config SB1250_MAC 98 tristate "SB1250 Gigabit Ethernet support" 99 depends on SIBYTE_SB1xxx_SOC 100 select PHYLIB 101 ---help--- 102 This driver supports Gigabit Ethernet interfaces based on the 103 Broadcom SiByte family of System-On-a-Chip parts. They include 104 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455 105 and BCM1480 chips. 106 107 To compile this driver as a module, choose M here: the module 108 will be called sb1250-mac. 109 110config TIGON3 111 tristate "Broadcom Tigon3 support" 112 depends on PCI 113 select PHYLIB 114 imply PTP_1588_CLOCK 115 ---help--- 116 This driver supports Broadcom Tigon3 based gigabit Ethernet cards. 117 118 To compile this driver as a module, choose M here: the module 119 will be called tg3. This is recommended. 120 121config TIGON3_HWMON 122 bool "Broadcom Tigon3 HWMON support" 123 default y 124 depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m) 125 ---help--- 126 Say Y if you want to expose the thermal sensor on Tigon3 devices. 127 128config BNX2X 129 tristate "Broadcom NetXtremeII 10Gb support" 130 depends on PCI 131 imply PTP_1588_CLOCK 132 select FW_LOADER 133 select ZLIB_INFLATE 134 select LIBCRC32C 135 select MDIO 136 ---help--- 137 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. 138 To compile this driver as a module, choose M here: the module 139 will be called bnx2x. This is recommended. 140 141config BNX2X_SRIOV 142 bool "Broadcom 578xx and 57712 SR-IOV support" 143 depends on BNX2X && PCI_IOV 144 default y 145 ---help--- 146 This configuration parameter enables Single Root Input Output 147 Virtualization support in the 578xx and 57712 products. This 148 allows for virtual function acceleration in virtual environments. 149 150config BGMAC 151 tristate 152 help 153 This enables the integrated ethernet controller support for many 154 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver 155 needs to be enabled to select this. 156 157config BGMAC_BCMA 158 tristate "Broadcom iProc GBit BCMA support" 159 depends on BCMA && BCMA_HOST_SOC 160 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST 161 select BGMAC 162 select PHYLIB 163 select FIXED_PHY 164 ---help--- 165 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. 166 They can be found on BCM47xx SoCs and provide gigabit ethernet. 167 In case of using this driver on BCM4706 it's also requires to enable 168 BCMA_DRIVER_GMAC_CMN to make it work. 169 170config BGMAC_PLATFORM 171 tristate "Broadcom iProc GBit platform support" 172 depends on ARCH_BCM_IPROC || COMPILE_TEST 173 depends on OF 174 select BGMAC 175 select PHYLIB 176 select FIXED_PHY 177 default ARCH_BCM_IPROC 178 ---help--- 179 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet 180 controller through the generic platform interface 181 182config SYSTEMPORT 183 tristate "Broadcom SYSTEMPORT internal MAC support" 184 depends on HAS_IOMEM 185 depends on NET_DSA || !NET_DSA 186 select MII 187 select PHYLIB 188 select FIXED_PHY 189 help 190 This driver supports the built-in Ethernet MACs found in the 191 Broadcom BCM7xxx Set Top Box family chipset using an internal 192 Ethernet switch. 193 194config BNXT 195 tristate "Broadcom NetXtreme-C/E support" 196 depends on PCI 197 select FW_LOADER 198 select LIBCRC32C 199 ---help--- 200 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit 201 Ethernet cards. To compile this driver as a module, choose M here: 202 the module will be called bnxt_en. This is recommended. 203 204config BNXT_SRIOV 205 bool "Broadcom NetXtreme-C/E SR-IOV support" 206 depends on BNXT && PCI_IOV 207 default y 208 ---help--- 209 This configuration parameter enables Single Root Input Output 210 Virtualization support in the NetXtreme-C/E products. This 211 allows for virtual function acceleration in virtual environments. 212 213config BNXT_FLOWER_OFFLOAD 214 bool "TC Flower offload support for NetXtreme-C/E" 215 depends on BNXT 216 default y 217 ---help--- 218 This configuration parameter enables TC Flower packet classifier 219 offload for eswitch. This option enables SR-IOV switchdev eswitch 220 offload. 221 222config BNXT_DCB 223 bool "Data Center Bridging (DCB) Support" 224 default n 225 depends on BNXT && DCB 226 ---help--- 227 Say Y here if you want to use Data Center Bridging (DCB) in the 228 driver. 229 230 If unsure, say N. 231 232config BNXT_HWMON 233 bool "Broadcom NetXtreme-C/E HWMON support" 234 default y 235 depends on BNXT && HWMON && !(BNXT=y && HWMON=m) 236 ---help--- 237 Say Y if you want to expose the thermal sensor data on NetXtreme-C/E 238 devices, via the hwmon sysfs interface. 239 240endif # NET_VENDOR_BROADCOM 241