1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Broadcom device configuration 4# 5 6config NET_VENDOR_BROADCOM 7 bool "Broadcom devices" 8 default y 9 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \ 10 SIBYTE_SB1xxx_SOC 11 help 12 If you have a network (Ethernet) chipset belonging to this class, 13 say Y. 14 15 Note that the answer to this question does not directly affect 16 the kernel: saying N will just cause the configurator to skip all 17 the questions regarding Broadcom chipsets. If you say Y, you will 18 be asked for your specific chipset/driver in the following questions. 19 20if NET_VENDOR_BROADCOM 21 22config B44 23 tristate "Broadcom 440x/47xx ethernet support" 24 depends on SSB_POSSIBLE && HAS_DMA 25 select SSB 26 select MII 27 select PHYLIB 28 help 29 If you have a network (Ethernet) controller of this type, say Y 30 or M here. 31 32 To compile this driver as a module, choose M here. The module 33 will be called b44. 34 35# Auto-select SSB PCI-HOST support, if possible 36config B44_PCI_AUTOSELECT 37 bool 38 depends on B44 && SSB_PCIHOST_POSSIBLE 39 select SSB_PCIHOST 40 default y 41 42# Auto-select SSB PCICORE driver, if possible 43config B44_PCICORE_AUTOSELECT 44 bool 45 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE 46 select SSB_DRIVER_PCICORE 47 default y 48 49config B44_PCI 50 bool 51 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT 52 default y 53 54config BCM4908_ENET 55 tristate "Broadcom BCM4908 internal mac support" 56 depends on ARCH_BCM4908 || COMPILE_TEST 57 default y if ARCH_BCM4908 58 help 59 This driver supports Ethernet controller integrated into Broadcom 60 BCM4908 family SoCs. 61 62config BCM63XX_ENET 63 tristate "Broadcom 63xx internal mac support" 64 depends on BCM63XX 65 select MII 66 select PHYLIB 67 help 68 This driver supports the ethernet MACs in the Broadcom 63xx 69 MIPS chipset family (BCM63XX). 70 71config BCMGENET 72 tristate "Broadcom GENET internal MAC support" 73 depends on HAS_IOMEM 74 select MII 75 select PHYLIB 76 select FIXED_PHY 77 select BCM7XXX_PHY 78 select MDIO_BCM_UNIMAC 79 select DIMLIB 80 select BROADCOM_PHY if ARCH_BCM2835 81 help 82 This driver supports the built-in Ethernet MACs found in the 83 Broadcom BCM7xxx Set Top Box family chipset. 84 85config BNX2 86 tristate "QLogic bnx2 support" 87 depends on PCI 88 select CRC32 89 select FW_LOADER 90 help 91 This driver supports QLogic bnx2 gigabit Ethernet cards. 92 93 To compile this driver as a module, choose M here: the module 94 will be called bnx2. This is recommended. 95 96config CNIC 97 tristate "QLogic CNIC support" 98 depends on PCI && (IPV6 || IPV6=n) 99 depends on MMU 100 select BNX2 101 select UIO 102 help 103 This driver supports offload features of QLogic bnx2 gigabit 104 Ethernet cards. 105 106 To compile this driver as a module, choose M here: the module 107 will be called cnic. This is recommended. 108 109config SB1250_MAC 110 tristate "SB1250 Gigabit Ethernet support" 111 depends on SIBYTE_SB1xxx_SOC 112 select PHYLIB 113 help 114 This driver supports Gigabit Ethernet interfaces based on the 115 Broadcom SiByte family of System-On-a-Chip parts. They include 116 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455 117 and BCM1480 chips. 118 119 To compile this driver as a module, choose M here: the module 120 will be called sb1250-mac. 121 122config TIGON3 123 tristate "Broadcom Tigon3 support" 124 depends on PCI 125 select PHYLIB 126 imply PTP_1588_CLOCK 127 help 128 This driver supports Broadcom Tigon3 based gigabit Ethernet cards. 129 130 To compile this driver as a module, choose M here: the module 131 will be called tg3. This is recommended. 132 133config TIGON3_HWMON 134 bool "Broadcom Tigon3 HWMON support" 135 default y 136 depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m) 137 help 138 Say Y if you want to expose the thermal sensor on Tigon3 devices. 139 140config BNX2X 141 tristate "Broadcom NetXtremeII 10Gb support" 142 depends on PCI 143 imply PTP_1588_CLOCK 144 select FW_LOADER 145 select ZLIB_INFLATE 146 select LIBCRC32C 147 select MDIO 148 help 149 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. 150 To compile this driver as a module, choose M here: the module 151 will be called bnx2x. This is recommended. 152 153config BNX2X_SRIOV 154 bool "Broadcom 578xx and 57712 SR-IOV support" 155 depends on BNX2X && PCI_IOV 156 default y 157 help 158 This configuration parameter enables Single Root Input Output 159 Virtualization support in the 578xx and 57712 products. This 160 allows for virtual function acceleration in virtual environments. 161 162config BGMAC 163 tristate 164 help 165 This enables the integrated ethernet controller support for many 166 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver 167 needs to be enabled to select this. 168 169config BGMAC_BCMA 170 tristate "Broadcom iProc GBit BCMA support" 171 depends on BCMA && BCMA_HOST_SOC 172 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST 173 select BGMAC 174 select PHYLIB 175 select FIXED_PHY 176 help 177 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. 178 They can be found on BCM47xx SoCs and provide gigabit ethernet. 179 In case of using this driver on BCM4706 it's also requires to enable 180 BCMA_DRIVER_GMAC_CMN to make it work. 181 182config BGMAC_PLATFORM 183 tristate "Broadcom iProc GBit platform support" 184 depends on ARCH_BCM_IPROC || COMPILE_TEST 185 select BGMAC 186 select PHYLIB 187 select FIXED_PHY 188 default ARCH_BCM_IPROC 189 help 190 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet 191 controller through the generic platform interface 192 193config SYSTEMPORT 194 tristate "Broadcom SYSTEMPORT internal MAC support" 195 depends on HAS_IOMEM 196 depends on NET_DSA || !NET_DSA 197 select MII 198 select PHYLIB 199 select FIXED_PHY 200 select DIMLIB 201 help 202 This driver supports the built-in Ethernet MACs found in the 203 Broadcom BCM7xxx Set Top Box family chipset using an internal 204 Ethernet switch. 205 206config BNXT 207 tristate "Broadcom NetXtreme-C/E support" 208 depends on PCI 209 imply PTP_1588_CLOCK 210 select FW_LOADER 211 select LIBCRC32C 212 select NET_DEVLINK 213 select PAGE_POOL 214 select DIMLIB 215 help 216 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit 217 Ethernet cards. To compile this driver as a module, choose M here: 218 the module will be called bnxt_en. This is recommended. 219 220config BNXT_SRIOV 221 bool "Broadcom NetXtreme-C/E SR-IOV support" 222 depends on BNXT && PCI_IOV 223 default y 224 help 225 This configuration parameter enables Single Root Input Output 226 Virtualization support in the NetXtreme-C/E products. This 227 allows for virtual function acceleration in virtual environments. 228 229config BNXT_FLOWER_OFFLOAD 230 bool "TC Flower offload support for NetXtreme-C/E" 231 depends on BNXT 232 default y 233 help 234 This configuration parameter enables TC Flower packet classifier 235 offload for eswitch. This option enables SR-IOV switchdev eswitch 236 offload. 237 238config BNXT_DCB 239 bool "Data Center Bridging (DCB) Support" 240 default n 241 depends on BNXT && DCB 242 help 243 Say Y here if you want to use Data Center Bridging (DCB) in the 244 driver. 245 246 If unsure, say N. 247 248config BNXT_HWMON 249 bool "Broadcom NetXtreme-C/E HWMON support" 250 default y 251 depends on BNXT && HWMON && !(BNXT=y && HWMON=m) 252 help 253 Say Y if you want to expose the thermal sensor data on NetXtreme-C/E 254 devices, via the hwmon sysfs interface. 255 256endif # NET_VENDOR_BROADCOM 257