1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Broadcom device configuration 4# 5 6config NET_VENDOR_BROADCOM 7 bool "Broadcom devices" 8 default y 9 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \ 10 SIBYTE_SB1xxx_SOC 11 help 12 If you have a network (Ethernet) chipset belonging to this class, 13 say Y. 14 15 Note that the answer to this question does not directly affect 16 the kernel: saying N will just cause the configurator to skip all 17 the questions regarding Broadcom chipsets. If you say Y, you will 18 be asked for your specific chipset/driver in the following questions. 19 20if NET_VENDOR_BROADCOM 21 22config B44 23 tristate "Broadcom 440x/47xx ethernet support" 24 depends on SSB_POSSIBLE && HAS_DMA 25 select SSB 26 select MII 27 select PHYLIB 28 select FIXED_PHY if BCM47XX 29 help 30 If you have a network (Ethernet) controller of this type, say Y 31 or M here. 32 33 To compile this driver as a module, choose M here. The module 34 will be called b44. 35 36# Auto-select SSB PCI-HOST support, if possible 37config B44_PCI_AUTOSELECT 38 bool 39 depends on B44 && SSB_PCIHOST_POSSIBLE 40 select SSB_PCIHOST 41 default y 42 43# Auto-select SSB PCICORE driver, if possible 44config B44_PCICORE_AUTOSELECT 45 bool 46 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE 47 select SSB_DRIVER_PCICORE 48 default y 49 50config B44_PCI 51 bool 52 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT 53 default y 54 55config BCM4908_ENET 56 tristate "Broadcom BCM4908 internal mac support" 57 depends on ARCH_BCMBCA || COMPILE_TEST 58 default y if ARCH_BCMBCA 59 help 60 This driver supports Ethernet controller integrated into Broadcom 61 BCM4908 family SoCs. 62 63config BCM63XX_ENET 64 tristate "Broadcom 63xx internal mac support" 65 depends on BCM63XX 66 select MII 67 select PHYLIB 68 help 69 This driver supports the ethernet MACs in the Broadcom 63xx 70 MIPS chipset family (BCM63XX). 71 72config BCMGENET 73 tristate "Broadcom GENET internal MAC support" 74 depends on HAS_IOMEM 75 depends on PTP_1588_CLOCK_OPTIONAL || !ARCH_BCM2835 76 select PHYLIB 77 select FIXED_PHY 78 select BCM7XXX_PHY 79 select MDIO_BCM_UNIMAC 80 select DIMLIB 81 select BROADCOM_PHY if ARCH_BCM2835 82 help 83 This driver supports the built-in Ethernet MACs found in the 84 Broadcom BCM7xxx Set Top Box family chipset. 85 86config BNX2 87 tristate "QLogic bnx2 support" 88 depends on PCI 89 select CRC32 90 select FW_LOADER 91 help 92 This driver supports QLogic bnx2 gigabit Ethernet cards. 93 94 To compile this driver as a module, choose M here: the module 95 will be called bnx2. This is recommended. 96 97config CNIC 98 tristate "QLogic CNIC support" 99 depends on PCI && (IPV6 || IPV6=n) 100 select BNX2 101 select UIO 102 help 103 This driver supports offload features of QLogic bnx2 gigabit 104 Ethernet cards. 105 106 To compile this driver as a module, choose M here: the module 107 will be called cnic. This is recommended. 108 109config SB1250_MAC 110 tristate "SB1250 Gigabit Ethernet support" 111 depends on SIBYTE_SB1xxx_SOC 112 select PHYLIB 113 help 114 This driver supports Gigabit Ethernet interfaces based on the 115 Broadcom SiByte family of System-On-a-Chip parts. They include 116 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455 117 and BCM1480 chips. 118 119 To compile this driver as a module, choose M here: the module 120 will be called sb1250-mac. 121 122config TIGON3 123 tristate "Broadcom Tigon3 support" 124 depends on PCI 125 depends on PTP_1588_CLOCK_OPTIONAL 126 select CRC32 127 select PHYLIB 128 help 129 This driver supports Broadcom Tigon3 based gigabit Ethernet cards. 130 131 To compile this driver as a module, choose M here: the module 132 will be called tg3. This is recommended. 133 134config TIGON3_HWMON 135 bool "Broadcom Tigon3 HWMON support" 136 default y 137 depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m) 138 help 139 Say Y if you want to expose the thermal sensor on Tigon3 devices. 140 141config BNX2X 142 tristate "Broadcom NetXtremeII 10Gb support" 143 depends on PCI 144 depends on PTP_1588_CLOCK_OPTIONAL 145 select FW_LOADER 146 select ZLIB_INFLATE 147 select CRC32 148 select MDIO 149 help 150 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. 151 To compile this driver as a module, choose M here: the module 152 will be called bnx2x. This is recommended. 153 154config BNX2X_SRIOV 155 bool "Broadcom 578xx and 57712 SR-IOV support" 156 depends on BNX2X && PCI_IOV 157 default y 158 help 159 This configuration parameter enables Single Root Input Output 160 Virtualization support in the 578xx and 57712 products. This 161 allows for virtual function acceleration in virtual environments. 162 163config BGMAC 164 tristate 165 help 166 This enables the integrated ethernet controller support for many 167 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver 168 needs to be enabled to select this. 169 170config BGMAC_BCMA 171 tristate "Broadcom iProc GBit BCMA support" 172 depends on BCMA && BCMA_HOST_SOC 173 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST 174 select BGMAC 175 select PHYLIB 176 select FIXED_PHY 177 help 178 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. 179 They can be found on BCM47xx SoCs and provide gigabit ethernet. 180 In case of using this driver on BCM4706 it's also requires to enable 181 BCMA_DRIVER_GMAC_CMN to make it work. 182 183config BGMAC_PLATFORM 184 tristate "Broadcom iProc GBit platform support" 185 depends on ARCH_BCM_IPROC || COMPILE_TEST 186 select BGMAC 187 select PHYLIB 188 select FIXED_PHY 189 default ARCH_BCM_IPROC 190 help 191 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet 192 controller through the generic platform interface 193 194config SYSTEMPORT 195 tristate "Broadcom SYSTEMPORT internal MAC support" 196 depends on HAS_IOMEM 197 depends on NET_DSA || !NET_DSA 198 select PHYLIB 199 select FIXED_PHY 200 select DIMLIB 201 help 202 This driver supports the built-in Ethernet MACs found in the 203 Broadcom BCM7xxx Set Top Box family chipset using an internal 204 Ethernet switch. 205 206config BNXT 207 tristate "Broadcom NetXtreme-C/E support" 208 depends on PCI 209 depends on PTP_1588_CLOCK_OPTIONAL 210 select FW_LOADER 211 select CRC32 212 select NET_DEVLINK 213 select PAGE_POOL 214 select DIMLIB 215 select AUXILIARY_BUS 216 help 217 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit 218 Ethernet cards. To compile this driver as a module, choose M here: 219 the module will be called bnxt_en. This is recommended. 220 221config BNXT_SRIOV 222 bool "Broadcom NetXtreme-C/E SR-IOV support" 223 depends on BNXT && PCI_IOV 224 default y 225 help 226 This configuration parameter enables Single Root Input Output 227 Virtualization support in the NetXtreme-C/E products. This 228 allows for virtual function acceleration in virtual environments. 229 230config BNXT_FLOWER_OFFLOAD 231 bool "TC Flower offload support for NetXtreme-C/E" 232 depends on BNXT 233 default y 234 help 235 This configuration parameter enables TC Flower packet classifier 236 offload for eswitch. This option enables SR-IOV switchdev eswitch 237 offload. 238 239config BNXT_DCB 240 bool "Data Center Bridging (DCB) Support" 241 default n 242 depends on BNXT && DCB 243 help 244 Say Y here if you want to use Data Center Bridging (DCB) in the 245 driver. 246 247 If unsure, say N. 248 249config BNXT_HWMON 250 bool "Broadcom NetXtreme-C/E HWMON support" 251 default y 252 depends on BNXT && HWMON && !(BNXT=y && HWMON=m) 253 help 254 Say Y if you want to expose the thermal sensor data on NetXtreme-C/E 255 devices, via the hwmon sysfs interface. 256 257config BNGE 258 tristate "Broadcom Ethernet device support" 259 depends on PCI 260 select NET_DEVLINK 261 select PAGE_POOL 262 help 263 This driver supports Broadcom 50/100/200/400/800 gigabit Ethernet cards. 264 The module will be called bng_en. To compile this driver as a module, 265 choose M here. 266 267config BCMASP 268 tristate "Broadcom ASP 2.0 Ethernet support" 269 depends on ARCH_BRCMSTB || COMPILE_TEST 270 default ARCH_BRCMSTB 271 depends on OF 272 select PHYLIB 273 select MDIO_BCM_UNIMAC 274 help 275 This configuration enables the Broadcom ASP 2.0 Ethernet controller 276 driver which is present in Broadcom STB SoCs such as 72165. 277 278endif # NET_VENDOR_BROADCOM 279