1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Broadcom device configuration 4# 5 6config NET_VENDOR_BROADCOM 7 bool "Broadcom devices" 8 default y 9 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \ 10 SIBYTE_SB1xxx_SOC 11 help 12 If you have a network (Ethernet) chipset belonging to this class, 13 say Y. 14 15 Note that the answer to this question does not directly affect 16 the kernel: saying N will just cause the configurator to skip all 17 the questions regarding Broadcom chipsets. If you say Y, you will 18 be asked for your specific chipset/driver in the following questions. 19 20if NET_VENDOR_BROADCOM 21 22config B44 23 tristate "Broadcom 440x/47xx ethernet support" 24 depends on SSB_POSSIBLE && HAS_DMA 25 select SSB 26 select MII 27 select PHYLIB 28 select FIXED_PHY 29 help 30 If you have a network (Ethernet) controller of this type, say Y 31 or M here. 32 33 To compile this driver as a module, choose M here. The module 34 will be called b44. 35 36# Auto-select SSB PCI-HOST support, if possible 37config B44_PCI_AUTOSELECT 38 bool 39 depends on B44 && SSB_PCIHOST_POSSIBLE 40 select SSB_PCIHOST 41 default y 42 43# Auto-select SSB PCICORE driver, if possible 44config B44_PCICORE_AUTOSELECT 45 bool 46 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE 47 select SSB_DRIVER_PCICORE 48 default y 49 50config B44_PCI 51 bool 52 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT 53 default y 54 55config BCM4908_ENET 56 tristate "Broadcom BCM4908 internal mac support" 57 depends on ARCH_BCMBCA || COMPILE_TEST 58 default y if ARCH_BCMBCA 59 help 60 This driver supports Ethernet controller integrated into Broadcom 61 BCM4908 family SoCs. 62 63config BCM63XX_ENET 64 tristate "Broadcom 63xx internal mac support" 65 depends on BCM63XX 66 select MII 67 select PHYLIB 68 help 69 This driver supports the ethernet MACs in the Broadcom 63xx 70 MIPS chipset family (BCM63XX). 71 72config BCMGENET 73 tristate "Broadcom GENET internal MAC support" 74 depends on HAS_IOMEM 75 depends on PTP_1588_CLOCK_OPTIONAL || !ARCH_BCM2835 76 select PHYLIB 77 select FIXED_PHY 78 select BCM7XXX_PHY 79 select MDIO_BCM_UNIMAC 80 select DIMLIB 81 select PAGE_POOL 82 select BROADCOM_PHY if ARCH_BCM2835 83 help 84 This driver supports the built-in Ethernet MACs found in the 85 Broadcom BCM7xxx Set Top Box family chipset. 86 87config BNX2 88 tristate "QLogic bnx2 support" 89 depends on PCI 90 select CRC32 91 select FW_LOADER 92 help 93 This driver supports QLogic bnx2 gigabit Ethernet cards. 94 95 To compile this driver as a module, choose M here: the module 96 will be called bnx2. This is recommended. 97 98config CNIC 99 tristate "QLogic CNIC support" 100 depends on PCI 101 select BNX2 102 select UIO 103 help 104 This driver supports offload features of QLogic bnx2 gigabit 105 Ethernet cards. 106 107 To compile this driver as a module, choose M here: the module 108 will be called cnic. This is recommended. 109 110config SB1250_MAC 111 tristate "SB1250 Gigabit Ethernet support" 112 depends on SIBYTE_SB1xxx_SOC 113 select PHYLIB 114 help 115 This driver supports Gigabit Ethernet interfaces based on the 116 Broadcom SiByte family of System-On-a-Chip parts. They include 117 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455 118 and BCM1480 chips. 119 120 To compile this driver as a module, choose M here: the module 121 will be called sb1250-mac. 122 123config TIGON3 124 tristate "Broadcom Tigon3 support" 125 depends on PCI 126 depends on PTP_1588_CLOCK_OPTIONAL 127 select CRC32 128 select PHYLIB 129 help 130 This driver supports Broadcom Tigon3 based gigabit Ethernet cards. 131 132 To compile this driver as a module, choose M here: the module 133 will be called tg3. This is recommended. 134 135config TIGON3_HWMON 136 bool "Broadcom Tigon3 HWMON support" 137 default y 138 depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m) 139 help 140 Say Y if you want to expose the thermal sensor on Tigon3 devices. 141 142config BNX2X 143 tristate "Broadcom NetXtremeII 10Gb support" 144 depends on PCI 145 depends on PTP_1588_CLOCK_OPTIONAL 146 select FW_LOADER 147 select ZLIB_INFLATE 148 select CRC32 149 select MDIO 150 help 151 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. 152 To compile this driver as a module, choose M here: the module 153 will be called bnx2x. This is recommended. 154 155config BNX2X_SRIOV 156 bool "Broadcom 578xx and 57712 SR-IOV support" 157 depends on BNX2X && PCI_IOV 158 default y 159 help 160 This configuration parameter enables Single Root Input Output 161 Virtualization support in the 578xx and 57712 products. This 162 allows for virtual function acceleration in virtual environments. 163 164config BGMAC 165 tristate 166 help 167 This enables the integrated ethernet controller support for many 168 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver 169 needs to be enabled to select this. 170 171config BGMAC_BCMA 172 tristate "Broadcom iProc GBit BCMA support" 173 depends on BCMA && BCMA_HOST_SOC 174 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST 175 select BGMAC 176 select PHYLIB 177 select FIXED_PHY 178 help 179 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. 180 They can be found on BCM47xx SoCs and provide gigabit ethernet. 181 In case of using this driver on BCM4706 it's also requires to enable 182 BCMA_DRIVER_GMAC_CMN to make it work. 183 184config BGMAC_PLATFORM 185 tristate "Broadcom iProc GBit platform support" 186 depends on ARCH_BCM_IPROC || COMPILE_TEST 187 select BGMAC 188 select PHYLIB 189 select FIXED_PHY 190 default ARCH_BCM_IPROC 191 help 192 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet 193 controller through the generic platform interface 194 195config SYSTEMPORT 196 tristate "Broadcom SYSTEMPORT internal MAC support" 197 depends on HAS_IOMEM 198 depends on NET_DSA || !NET_DSA 199 select PHYLIB 200 select FIXED_PHY 201 select DIMLIB 202 help 203 This driver supports the built-in Ethernet MACs found in the 204 Broadcom BCM7xxx Set Top Box family chipset using an internal 205 Ethernet switch. 206 207config BNXT 208 tristate "Broadcom NetXtreme-C/E support" 209 depends on PCI 210 depends on PTP_1588_CLOCK_OPTIONAL 211 select FW_LOADER 212 select CRC32 213 select NET_DEVLINK 214 select PAGE_POOL 215 select DIMLIB 216 select AUXILIARY_BUS 217 help 218 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit 219 Ethernet cards. To compile this driver as a module, choose M here: 220 the module will be called bnxt_en. This is recommended. 221 222config BNXT_SRIOV 223 bool "Broadcom NetXtreme-C/E SR-IOV support" 224 depends on BNXT && PCI_IOV 225 default y 226 help 227 This configuration parameter enables Single Root Input Output 228 Virtualization support in the NetXtreme-C/E products. This 229 allows for virtual function acceleration in virtual environments. 230 231config BNXT_FLOWER_OFFLOAD 232 bool "TC Flower offload support for NetXtreme-C/E" 233 depends on BNXT 234 default y 235 help 236 This configuration parameter enables TC Flower packet classifier 237 offload for eswitch. This option enables SR-IOV switchdev eswitch 238 offload. 239 240config BNXT_DCB 241 bool "Data Center Bridging (DCB) Support" 242 default n 243 depends on BNXT && DCB 244 help 245 Say Y here if you want to use Data Center Bridging (DCB) in the 246 driver. 247 248 If unsure, say N. 249 250config BNXT_HWMON 251 bool "Broadcom NetXtreme-C/E HWMON support" 252 default y 253 depends on BNXT && HWMON && !(BNXT=y && HWMON=m) 254 help 255 Say Y if you want to expose the thermal sensor data on NetXtreme-C/E 256 devices, via the hwmon sysfs interface. 257 258config BNGE 259 tristate "Broadcom ThorUltra Ethernet device support" 260 depends on PCI 261 select NET_DEVLINK 262 select PAGE_POOL 263 select AUXILIARY_BUS 264 help 265 This driver supports Broadcom ThorUltra 50/100/200/400/800 gigabit 266 Ethernet cards. The module will be called bng_en. To compile this 267 driver as a module, choose M here. 268 269config BCMASP 270 tristate "Broadcom ASP 2.0 Ethernet support" 271 depends on ARCH_BRCMSTB || COMPILE_TEST 272 default ARCH_BRCMSTB 273 depends on OF 274 select PHYLIB 275 select MDIO_BCM_UNIMAC 276 select PAGE_POOL 277 help 278 This configuration enables the Broadcom ASP 2.0 Ethernet controller 279 driver which is present in Broadcom STB SoCs such as 72165. 280 281endif # NET_VENDOR_BROADCOM 282