1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Broadcom device configuration 4# 5 6config NET_VENDOR_BROADCOM 7 bool "Broadcom devices" 8 default y 9 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \ 10 SIBYTE_SB1xxx_SOC 11 ---help--- 12 If you have a network (Ethernet) chipset belonging to this class, 13 say Y. 14 15 Note that the answer to this question does not directly affect 16 the kernel: saying N will just cause the configurator to skip all 17 the questions regarding Broadcom chipsets. If you say Y, you will 18 be asked for your specific chipset/driver in the following questions. 19 20if NET_VENDOR_BROADCOM 21 22config B44 23 tristate "Broadcom 440x/47xx ethernet support" 24 depends on SSB_POSSIBLE && HAS_DMA 25 select SSB 26 select MII 27 select PHYLIB 28 ---help--- 29 If you have a network (Ethernet) controller of this type, say Y 30 or M here. 31 32 To compile this driver as a module, choose M here. The module 33 will be called b44. 34 35# Auto-select SSB PCI-HOST support, if possible 36config B44_PCI_AUTOSELECT 37 bool 38 depends on B44 && SSB_PCIHOST_POSSIBLE 39 select SSB_PCIHOST 40 default y 41 42# Auto-select SSB PCICORE driver, if possible 43config B44_PCICORE_AUTOSELECT 44 bool 45 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE 46 select SSB_DRIVER_PCICORE 47 default y 48 49config B44_PCI 50 bool 51 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT 52 default y 53 54config BCM63XX_ENET 55 tristate "Broadcom 63xx internal mac support" 56 depends on BCM63XX 57 select MII 58 select PHYLIB 59 help 60 This driver supports the ethernet MACs in the Broadcom 63xx 61 MIPS chipset family (BCM63XX). 62 63config BCMGENET 64 tristate "Broadcom GENET internal MAC support" 65 depends on HAS_IOMEM 66 select MII 67 select PHYLIB 68 select FIXED_PHY 69 select BCM7XXX_PHY 70 select MDIO_BCM_UNIMAC 71 select DIMLIB 72 help 73 This driver supports the built-in Ethernet MACs found in the 74 Broadcom BCM7xxx Set Top Box family chipset. 75 76config BNX2 77 tristate "QLogic bnx2 support" 78 depends on PCI 79 select CRC32 80 select FW_LOADER 81 ---help--- 82 This driver supports QLogic bnx2 gigabit Ethernet cards. 83 84 To compile this driver as a module, choose M here: the module 85 will be called bnx2. This is recommended. 86 87config CNIC 88 tristate "QLogic CNIC support" 89 depends on PCI && (IPV6 || IPV6=n) 90 select BNX2 91 select UIO 92 ---help--- 93 This driver supports offload features of QLogic bnx2 gigabit 94 Ethernet cards. 95 96 To compile this driver as a module, choose M here: the module 97 will be called cnic. This is recommended. 98 99config SB1250_MAC 100 tristate "SB1250 Gigabit Ethernet support" 101 depends on SIBYTE_SB1xxx_SOC 102 select PHYLIB 103 ---help--- 104 This driver supports Gigabit Ethernet interfaces based on the 105 Broadcom SiByte family of System-On-a-Chip parts. They include 106 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455 107 and BCM1480 chips. 108 109 To compile this driver as a module, choose M here: the module 110 will be called sb1250-mac. 111 112config TIGON3 113 tristate "Broadcom Tigon3 support" 114 depends on PCI 115 select PHYLIB 116 imply PTP_1588_CLOCK 117 ---help--- 118 This driver supports Broadcom Tigon3 based gigabit Ethernet cards. 119 120 To compile this driver as a module, choose M here: the module 121 will be called tg3. This is recommended. 122 123config TIGON3_HWMON 124 bool "Broadcom Tigon3 HWMON support" 125 default y 126 depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m) 127 ---help--- 128 Say Y if you want to expose the thermal sensor on Tigon3 devices. 129 130config BNX2X 131 tristate "Broadcom NetXtremeII 10Gb support" 132 depends on PCI 133 imply PTP_1588_CLOCK 134 select FW_LOADER 135 select ZLIB_INFLATE 136 select LIBCRC32C 137 select MDIO 138 ---help--- 139 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. 140 To compile this driver as a module, choose M here: the module 141 will be called bnx2x. This is recommended. 142 143config BNX2X_SRIOV 144 bool "Broadcom 578xx and 57712 SR-IOV support" 145 depends on BNX2X && PCI_IOV 146 default y 147 ---help--- 148 This configuration parameter enables Single Root Input Output 149 Virtualization support in the 578xx and 57712 products. This 150 allows for virtual function acceleration in virtual environments. 151 152config BGMAC 153 tristate 154 help 155 This enables the integrated ethernet controller support for many 156 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver 157 needs to be enabled to select this. 158 159config BGMAC_BCMA 160 tristate "Broadcom iProc GBit BCMA support" 161 depends on BCMA && BCMA_HOST_SOC 162 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST 163 select BGMAC 164 select PHYLIB 165 select FIXED_PHY 166 ---help--- 167 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. 168 They can be found on BCM47xx SoCs and provide gigabit ethernet. 169 In case of using this driver on BCM4706 it's also requires to enable 170 BCMA_DRIVER_GMAC_CMN to make it work. 171 172config BGMAC_PLATFORM 173 tristate "Broadcom iProc GBit platform support" 174 depends on ARCH_BCM_IPROC || COMPILE_TEST 175 depends on OF 176 select BGMAC 177 select PHYLIB 178 select FIXED_PHY 179 default ARCH_BCM_IPROC 180 ---help--- 181 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet 182 controller through the generic platform interface 183 184config SYSTEMPORT 185 tristate "Broadcom SYSTEMPORT internal MAC support" 186 depends on HAS_IOMEM 187 depends on NET_DSA || !NET_DSA 188 select MII 189 select PHYLIB 190 select FIXED_PHY 191 select DIMLIB 192 help 193 This driver supports the built-in Ethernet MACs found in the 194 Broadcom BCM7xxx Set Top Box family chipset using an internal 195 Ethernet switch. 196 197config BNXT 198 tristate "Broadcom NetXtreme-C/E support" 199 depends on PCI 200 select FW_LOADER 201 select LIBCRC32C 202 select NET_DEVLINK 203 select PAGE_POOL 204 select DIMLIB 205 ---help--- 206 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit 207 Ethernet cards. To compile this driver as a module, choose M here: 208 the module will be called bnxt_en. This is recommended. 209 210config BNXT_SRIOV 211 bool "Broadcom NetXtreme-C/E SR-IOV support" 212 depends on BNXT && PCI_IOV 213 default y 214 ---help--- 215 This configuration parameter enables Single Root Input Output 216 Virtualization support in the NetXtreme-C/E products. This 217 allows for virtual function acceleration in virtual environments. 218 219config BNXT_FLOWER_OFFLOAD 220 bool "TC Flower offload support for NetXtreme-C/E" 221 depends on BNXT 222 default y 223 ---help--- 224 This configuration parameter enables TC Flower packet classifier 225 offload for eswitch. This option enables SR-IOV switchdev eswitch 226 offload. 227 228config BNXT_DCB 229 bool "Data Center Bridging (DCB) Support" 230 default n 231 depends on BNXT && DCB 232 ---help--- 233 Say Y here if you want to use Data Center Bridging (DCB) in the 234 driver. 235 236 If unsure, say N. 237 238config BNXT_HWMON 239 bool "Broadcom NetXtreme-C/E HWMON support" 240 default y 241 depends on BNXT && HWMON && !(BNXT=y && HWMON=m) 242 ---help--- 243 Say Y if you want to expose the thermal sensor data on NetXtreme-C/E 244 devices, via the hwmon sysfs interface. 245 246endif # NET_VENDOR_BROADCOM 247