xref: /linux/drivers/net/ethernet/amd/au1000_eth.h (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  *
4  * Alchemy Au1x00 ethernet driver include file
5  *
6  * Author: Pete Popov <ppopov@mvista.com>
7  *
8  * Copyright 2001 MontaVista Software Inc.
9  */
10 
11 
12 #define MAC_IOSIZE 0x10000
13 #define NUM_RX_DMA 4       /* Au1x00 has 4 rx hardware descriptors */
14 #define NUM_TX_DMA 4       /* Au1x00 has 4 tx hardware descriptors */
15 
16 #define NUM_RX_BUFFS 4
17 #define NUM_TX_BUFFS 4
18 #define MAX_BUF_SIZE 2048
19 
20 #define ETH_TX_TIMEOUT (HZ/4)
21 #define MAC_MIN_PKT_SIZE 64
22 
23 #define MULTICAST_FILTER_LIMIT 64
24 
25 /*
26  * Data Buffer Descriptor. Data buffers must be aligned on 32 byte
27  * boundary for both, receive and transmit.
28  */
29 struct db_dest {
30 	struct db_dest *pnext;
31 	u32 *vaddr;
32 	dma_addr_t dma_addr;
33 };
34 
35 /*
36  * The transmit and receive descriptors are memory
37  * mapped registers.
38  */
39 struct tx_dma {
40 	u32 status;
41 	u32 buff_stat;
42 	u32 len;
43 	u32 pad;
44 };
45 
46 struct rx_dma {
47 	u32 status;
48 	u32 buff_stat;
49 	u32 pad[2];
50 };
51 
52 
53 /*
54  * MAC control registers, memory mapped.
55  */
56 struct mac_reg {
57 	u32 control;
58 	u32 mac_addr_high;
59 	u32 mac_addr_low;
60 	u32 multi_hash_high;
61 	u32 multi_hash_low;
62 	u32 mii_control;
63 	u32 mii_data;
64 	u32 flow_control;
65 	u32 vlan1_tag;
66 	u32 vlan2_tag;
67 };
68 
69 
70 struct au1000_private {
71 	struct db_dest *pDBfree;
72 	struct db_dest db[NUM_RX_BUFFS+NUM_TX_BUFFS];
73 	struct rx_dma *rx_dma_ring[NUM_RX_DMA];
74 	struct tx_dma *tx_dma_ring[NUM_TX_DMA];
75 	struct db_dest *rx_db_inuse[NUM_RX_DMA];
76 	struct db_dest *tx_db_inuse[NUM_TX_DMA];
77 	u32 rx_head;
78 	u32 tx_head;
79 	u32 tx_tail;
80 	u32 tx_full;
81 
82 	int mac_id;
83 
84 	int mac_enabled;       /* whether MAC is currently enabled and running
85 				* (req. for mdio)
86 				*/
87 
88 	int old_link;          /* used by au1000_adjust_link */
89 	int old_speed;
90 	int old_duplex;
91 
92 	struct mii_bus *mii_bus;
93 
94 	/* PHY configuration */
95 	int phy_static_config;
96 	int phy_search_highest_addr;
97 	int phy1_search_mac0;
98 
99 	int phy_addr;
100 	int phy_busid;
101 	int phy_irq;
102 
103 	/* These variables are just for quick access
104 	 * to certain regs addresses.
105 	 */
106 	struct mac_reg *mac;  /* mac registers                      */
107 	u32 *enable;     /* address of MAC Enable Register     */
108 	void __iomem *macdma;	/* base of MAC DMA port */
109 	void *vaddr;		/* virtual address of rx/tx buffers   */
110 	dma_addr_t dma_addr;	/* dma address of rx/tx buffers       */
111 
112 	spinlock_t lock;       /* Serialise access to device */
113 
114 	u32 msg_enable;
115 };
116