1 2 /* Advanced Micro Devices Inc. AMD8111E Linux Network Driver 3 * Copyright (C) 2004 Advanced Micro Devices 4 * 5 * 6 * Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ] 7 * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c] 8 * Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ] 9 * Derived from the lance driver written 1993,1994,1995 by Donald Becker. 10 * Copyright 1993 United States Government as represented by the 11 * Director, National Security Agency.[ pcnet32.c ] 12 * Carsten Langgaard, carstenl@mips.com [ pcnet32.c ] 13 * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. 14 * 15 * 16 * This program is free software; you can redistribute it and/or modify 17 * it under the terms of the GNU General Public License as published by 18 * the Free Software Foundation; either version 2 of the License, or 19 * (at your option) any later version. 20 * 21 * This program is distributed in the hope that it will be useful, 22 * but WITHOUT ANY WARRANTY; without even the implied warranty of 23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 24 * GNU General Public License for more details. 25 * 26 * You should have received a copy of the GNU General Public License 27 * along with this program; if not, see <http://www.gnu.org/licenses/>. 28 29 Module Name: 30 31 amd8111e.c 32 33 Abstract: 34 35 AMD8111 based 10/100 Ethernet Controller Driver. 36 37 Environment: 38 39 Kernel Mode 40 41 Revision History: 42 3.0.0 43 Initial Revision. 44 3.0.1 45 1. Dynamic interrupt coalescing. 46 2. Removed prev_stats. 47 3. MII support. 48 4. Dynamic IPG support 49 3.0.2 05/29/2003 50 1. Bug fix: Fixed failure to send jumbo packets larger than 4k. 51 2. Bug fix: Fixed VLAN support failure. 52 3. Bug fix: Fixed receive interrupt coalescing bug. 53 4. Dynamic IPG support is disabled by default. 54 3.0.3 06/05/2003 55 1. Bug fix: Fixed failure to close the interface if SMP is enabled. 56 3.0.4 12/09/2003 57 1. Added set_mac_address routine for bonding driver support. 58 2. Tested the driver for bonding support 59 3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth 60 indicated to the h/w. 61 4. Modified amd8111e_rx() routine to receive all the received packets 62 in the first interrupt. 63 5. Bug fix: Corrected rx_errors reported in get_stats() function. 64 3.0.5 03/22/2004 65 1. Added NAPI support 66 67 */ 68 69 70 #include <linux/module.h> 71 #include <linux/kernel.h> 72 #include <linux/types.h> 73 #include <linux/compiler.h> 74 #include <linux/delay.h> 75 #include <linux/interrupt.h> 76 #include <linux/ioport.h> 77 #include <linux/pci.h> 78 #include <linux/netdevice.h> 79 #include <linux/etherdevice.h> 80 #include <linux/skbuff.h> 81 #include <linux/ethtool.h> 82 #include <linux/mii.h> 83 #include <linux/if_vlan.h> 84 #include <linux/ctype.h> 85 #include <linux/crc32.h> 86 #include <linux/dma-mapping.h> 87 88 #include <asm/io.h> 89 #include <asm/byteorder.h> 90 #include <linux/uaccess.h> 91 92 #if IS_ENABLED(CONFIG_VLAN_8021Q) 93 #define AMD8111E_VLAN_TAG_USED 1 94 #else 95 #define AMD8111E_VLAN_TAG_USED 0 96 #endif 97 98 #include "amd8111e.h" 99 #define MODULE_NAME "amd8111e" 100 #define MODULE_VERS "3.0.7" 101 MODULE_AUTHOR("Advanced Micro Devices, Inc."); 102 MODULE_DESCRIPTION ("AMD8111 based 10/100 Ethernet Controller. Driver Version "MODULE_VERS); 103 MODULE_LICENSE("GPL"); 104 module_param_array(speed_duplex, int, NULL, 0); 105 MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotiate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex"); 106 module_param_array(coalesce, bool, NULL, 0); 107 MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable"); 108 module_param_array(dynamic_ipg, bool, NULL, 0); 109 MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable"); 110 111 /* This function will read the PHY registers. */ 112 static int amd8111e_read_phy(struct amd8111e_priv *lp, 113 int phy_id, int reg, u32 *val) 114 { 115 void __iomem *mmio = lp->mmio; 116 unsigned int reg_val; 117 unsigned int repeat= REPEAT_CNT; 118 119 reg_val = readl(mmio + PHY_ACCESS); 120 while (reg_val & PHY_CMD_ACTIVE) 121 reg_val = readl( mmio + PHY_ACCESS ); 122 123 writel( PHY_RD_CMD | ((phy_id & 0x1f) << 21) | 124 ((reg & 0x1f) << 16), mmio +PHY_ACCESS); 125 do{ 126 reg_val = readl(mmio + PHY_ACCESS); 127 udelay(30); /* It takes 30 us to read/write data */ 128 } while (--repeat && (reg_val & PHY_CMD_ACTIVE)); 129 if(reg_val & PHY_RD_ERR) 130 goto err_phy_read; 131 132 *val = reg_val & 0xffff; 133 return 0; 134 err_phy_read: 135 *val = 0; 136 return -EINVAL; 137 138 } 139 140 /* This function will write into PHY registers. */ 141 static int amd8111e_write_phy(struct amd8111e_priv *lp, 142 int phy_id, int reg, u32 val) 143 { 144 unsigned int repeat = REPEAT_CNT; 145 void __iomem *mmio = lp->mmio; 146 unsigned int reg_val; 147 148 reg_val = readl(mmio + PHY_ACCESS); 149 while (reg_val & PHY_CMD_ACTIVE) 150 reg_val = readl( mmio + PHY_ACCESS ); 151 152 writel( PHY_WR_CMD | ((phy_id & 0x1f) << 21) | 153 ((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS); 154 155 do{ 156 reg_val = readl(mmio + PHY_ACCESS); 157 udelay(30); /* It takes 30 us to read/write the data */ 158 } while (--repeat && (reg_val & PHY_CMD_ACTIVE)); 159 160 if(reg_val & PHY_RD_ERR) 161 goto err_phy_write; 162 163 return 0; 164 165 err_phy_write: 166 return -EINVAL; 167 168 } 169 170 /* This is the mii register read function provided to the mii interface. */ 171 static int amd8111e_mdio_read(struct net_device *dev, int phy_id, int reg_num) 172 { 173 struct amd8111e_priv *lp = netdev_priv(dev); 174 unsigned int reg_val; 175 176 amd8111e_read_phy(lp,phy_id,reg_num,®_val); 177 return reg_val; 178 179 } 180 181 /* This is the mii register write function provided to the mii interface. */ 182 static void amd8111e_mdio_write(struct net_device *dev, 183 int phy_id, int reg_num, int val) 184 { 185 struct amd8111e_priv *lp = netdev_priv(dev); 186 187 amd8111e_write_phy(lp, phy_id, reg_num, val); 188 } 189 190 /* This function will set PHY speed. During initialization sets 191 * the original speed to 100 full 192 */ 193 static void amd8111e_set_ext_phy(struct net_device *dev) 194 { 195 struct amd8111e_priv *lp = netdev_priv(dev); 196 u32 bmcr,advert,tmp; 197 198 /* Determine mii register values to set the speed */ 199 advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE); 200 tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4); 201 switch (lp->ext_phy_option){ 202 203 default: 204 case SPEED_AUTONEG: /* advertise all values */ 205 tmp |= ( ADVERTISE_10HALF|ADVERTISE_10FULL| 206 ADVERTISE_100HALF|ADVERTISE_100FULL) ; 207 break; 208 case SPEED10_HALF: 209 tmp |= ADVERTISE_10HALF; 210 break; 211 case SPEED10_FULL: 212 tmp |= ADVERTISE_10FULL; 213 break; 214 case SPEED100_HALF: 215 tmp |= ADVERTISE_100HALF; 216 break; 217 case SPEED100_FULL: 218 tmp |= ADVERTISE_100FULL; 219 break; 220 } 221 222 if(advert != tmp) 223 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp); 224 /* Restart auto negotiation */ 225 bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR); 226 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); 227 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr); 228 229 } 230 231 /* This function will unmap skb->data space and will free 232 * all transmit and receive skbuffs. 233 */ 234 static int amd8111e_free_skbs(struct net_device *dev) 235 { 236 struct amd8111e_priv *lp = netdev_priv(dev); 237 struct sk_buff *rx_skbuff; 238 int i; 239 240 /* Freeing transmit skbs */ 241 for(i = 0; i < NUM_TX_BUFFERS; i++){ 242 if(lp->tx_skbuff[i]){ 243 pci_unmap_single(lp->pci_dev,lp->tx_dma_addr[i], lp->tx_skbuff[i]->len,PCI_DMA_TODEVICE); 244 dev_kfree_skb (lp->tx_skbuff[i]); 245 lp->tx_skbuff[i] = NULL; 246 lp->tx_dma_addr[i] = 0; 247 } 248 } 249 /* Freeing previously allocated receive buffers */ 250 for (i = 0; i < NUM_RX_BUFFERS; i++){ 251 rx_skbuff = lp->rx_skbuff[i]; 252 if(rx_skbuff != NULL){ 253 pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[i], 254 lp->rx_buff_len - 2,PCI_DMA_FROMDEVICE); 255 dev_kfree_skb(lp->rx_skbuff[i]); 256 lp->rx_skbuff[i] = NULL; 257 lp->rx_dma_addr[i] = 0; 258 } 259 } 260 261 return 0; 262 } 263 264 /* This will set the receive buffer length corresponding 265 * to the mtu size of networkinterface. 266 */ 267 static inline void amd8111e_set_rx_buff_len(struct net_device *dev) 268 { 269 struct amd8111e_priv *lp = netdev_priv(dev); 270 unsigned int mtu = dev->mtu; 271 272 if (mtu > ETH_DATA_LEN){ 273 /* MTU + ethernet header + FCS 274 * + optional VLAN tag + skb reserve space 2 275 */ 276 lp->rx_buff_len = mtu + ETH_HLEN + 10; 277 lp->options |= OPTION_JUMBO_ENABLE; 278 } else{ 279 lp->rx_buff_len = PKT_BUFF_SZ; 280 lp->options &= ~OPTION_JUMBO_ENABLE; 281 } 282 } 283 284 /* This function will free all the previously allocated buffers, 285 * determine new receive buffer length and will allocate new receive buffers. 286 * This function also allocates and initializes both the transmitter 287 * and receive hardware descriptors. 288 */ 289 static int amd8111e_init_ring(struct net_device *dev) 290 { 291 struct amd8111e_priv *lp = netdev_priv(dev); 292 int i; 293 294 lp->rx_idx = lp->tx_idx = 0; 295 lp->tx_complete_idx = 0; 296 lp->tx_ring_idx = 0; 297 298 299 if(lp->opened) 300 /* Free previously allocated transmit and receive skbs */ 301 amd8111e_free_skbs(dev); 302 303 else{ 304 /* allocate the tx and rx descriptors */ 305 if((lp->tx_ring = pci_alloc_consistent(lp->pci_dev, 306 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR, 307 &lp->tx_ring_dma_addr)) == NULL) 308 309 goto err_no_mem; 310 311 if((lp->rx_ring = pci_alloc_consistent(lp->pci_dev, 312 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR, 313 &lp->rx_ring_dma_addr)) == NULL) 314 315 goto err_free_tx_ring; 316 317 } 318 /* Set new receive buff size */ 319 amd8111e_set_rx_buff_len(dev); 320 321 /* Allocating receive skbs */ 322 for (i = 0; i < NUM_RX_BUFFERS; i++) { 323 324 lp->rx_skbuff[i] = netdev_alloc_skb(dev, lp->rx_buff_len); 325 if (!lp->rx_skbuff[i]) { 326 /* Release previos allocated skbs */ 327 for(--i; i >= 0 ;i--) 328 dev_kfree_skb(lp->rx_skbuff[i]); 329 goto err_free_rx_ring; 330 } 331 skb_reserve(lp->rx_skbuff[i],2); 332 } 333 /* Initilaizing receive descriptors */ 334 for (i = 0; i < NUM_RX_BUFFERS; i++) { 335 lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev, 336 lp->rx_skbuff[i]->data,lp->rx_buff_len-2, PCI_DMA_FROMDEVICE); 337 338 lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]); 339 lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2); 340 wmb(); 341 lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT); 342 } 343 344 /* Initializing transmit descriptors */ 345 for (i = 0; i < NUM_TX_RING_DR; i++) { 346 lp->tx_ring[i].buff_phy_addr = 0; 347 lp->tx_ring[i].tx_flags = 0; 348 lp->tx_ring[i].buff_count = 0; 349 } 350 351 return 0; 352 353 err_free_rx_ring: 354 355 pci_free_consistent(lp->pci_dev, 356 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,lp->rx_ring, 357 lp->rx_ring_dma_addr); 358 359 err_free_tx_ring: 360 361 pci_free_consistent(lp->pci_dev, 362 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,lp->tx_ring, 363 lp->tx_ring_dma_addr); 364 365 err_no_mem: 366 return -ENOMEM; 367 } 368 369 /* This function will set the interrupt coalescing according 370 * to the input arguments 371 */ 372 static int amd8111e_set_coalesce(struct net_device *dev, enum coal_mode cmod) 373 { 374 unsigned int timeout; 375 unsigned int event_count; 376 377 struct amd8111e_priv *lp = netdev_priv(dev); 378 void __iomem *mmio = lp->mmio; 379 struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf; 380 381 382 switch(cmod) 383 { 384 case RX_INTR_COAL : 385 timeout = coal_conf->rx_timeout; 386 event_count = coal_conf->rx_event_count; 387 if( timeout > MAX_TIMEOUT || 388 event_count > MAX_EVENT_COUNT ) 389 return -EINVAL; 390 391 timeout = timeout * DELAY_TIMER_CONV; 392 writel(VAL0|STINTEN, mmio+INTEN0); 393 writel((u32)DLY_INT_A_R0|( event_count<< 16 )|timeout, 394 mmio+DLY_INT_A); 395 break; 396 397 case TX_INTR_COAL : 398 timeout = coal_conf->tx_timeout; 399 event_count = coal_conf->tx_event_count; 400 if( timeout > MAX_TIMEOUT || 401 event_count > MAX_EVENT_COUNT ) 402 return -EINVAL; 403 404 405 timeout = timeout * DELAY_TIMER_CONV; 406 writel(VAL0|STINTEN,mmio+INTEN0); 407 writel((u32)DLY_INT_B_T0|( event_count<< 16 )|timeout, 408 mmio+DLY_INT_B); 409 break; 410 411 case DISABLE_COAL: 412 writel(0,mmio+STVAL); 413 writel(STINTEN, mmio+INTEN0); 414 writel(0, mmio +DLY_INT_B); 415 writel(0, mmio+DLY_INT_A); 416 break; 417 case ENABLE_COAL: 418 /* Start the timer */ 419 writel((u32)SOFT_TIMER_FREQ, mmio+STVAL); /* 0.5 sec */ 420 writel(VAL0|STINTEN, mmio+INTEN0); 421 break; 422 default: 423 break; 424 425 } 426 return 0; 427 428 } 429 430 /* This function initializes the device registers and starts the device. */ 431 static int amd8111e_restart(struct net_device *dev) 432 { 433 struct amd8111e_priv *lp = netdev_priv(dev); 434 void __iomem *mmio = lp->mmio; 435 int i,reg_val; 436 437 /* stop the chip */ 438 writel(RUN, mmio + CMD0); 439 440 if(amd8111e_init_ring(dev)) 441 return -ENOMEM; 442 443 /* enable the port manager and set auto negotiation always */ 444 writel((u32) VAL1|EN_PMGR, mmio + CMD3 ); 445 writel((u32)XPHYANE|XPHYRST , mmio + CTRL2); 446 447 amd8111e_set_ext_phy(dev); 448 449 /* set control registers */ 450 reg_val = readl(mmio + CTRL1); 451 reg_val &= ~XMTSP_MASK; 452 writel( reg_val| XMTSP_128 | CACHE_ALIGN, mmio + CTRL1 ); 453 454 /* enable interrupt */ 455 writel( APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN | 456 APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN | 457 SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0); 458 459 writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0); 460 461 /* initialize tx and rx ring base addresses */ 462 writel((u32)lp->tx_ring_dma_addr,mmio + XMT_RING_BASE_ADDR0); 463 writel((u32)lp->rx_ring_dma_addr,mmio+ RCV_RING_BASE_ADDR0); 464 465 writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0); 466 writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0); 467 468 /* set default IPG to 96 */ 469 writew((u32)DEFAULT_IPG,mmio+IPG); 470 writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1); 471 472 if(lp->options & OPTION_JUMBO_ENABLE){ 473 writel((u32)VAL2|JUMBO, mmio + CMD3); 474 /* Reset REX_UFLO */ 475 writel( REX_UFLO, mmio + CMD2); 476 /* Should not set REX_UFLO for jumbo frames */ 477 writel( VAL0 | APAD_XMT|REX_RTRY , mmio + CMD2); 478 }else{ 479 writel( VAL0 | APAD_XMT | REX_RTRY|REX_UFLO, mmio + CMD2); 480 writel((u32)JUMBO, mmio + CMD3); 481 } 482 483 #if AMD8111E_VLAN_TAG_USED 484 writel((u32) VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3); 485 #endif 486 writel( VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2 ); 487 488 /* Setting the MAC address to the device */ 489 for (i = 0; i < ETH_ALEN; i++) 490 writeb( dev->dev_addr[i], mmio + PADR + i ); 491 492 /* Enable interrupt coalesce */ 493 if(lp->options & OPTION_INTR_COAL_ENABLE){ 494 netdev_info(dev, "Interrupt Coalescing Enabled.\n"); 495 amd8111e_set_coalesce(dev,ENABLE_COAL); 496 } 497 498 /* set RUN bit to start the chip */ 499 writel(VAL2 | RDMD0, mmio + CMD0); 500 writel(VAL0 | INTREN | RUN, mmio + CMD0); 501 502 /* To avoid PCI posting bug */ 503 readl(mmio+CMD0); 504 return 0; 505 } 506 507 /* This function clears necessary the device registers. */ 508 static void amd8111e_init_hw_default(struct amd8111e_priv *lp) 509 { 510 unsigned int reg_val; 511 unsigned int logic_filter[2] ={0,}; 512 void __iomem *mmio = lp->mmio; 513 514 515 /* stop the chip */ 516 writel(RUN, mmio + CMD0); 517 518 /* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */ 519 writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0); 520 521 /* Clear RCV_RING_BASE_ADDR */ 522 writel(0, mmio + RCV_RING_BASE_ADDR0); 523 524 /* Clear XMT_RING_BASE_ADDR */ 525 writel(0, mmio + XMT_RING_BASE_ADDR0); 526 writel(0, mmio + XMT_RING_BASE_ADDR1); 527 writel(0, mmio + XMT_RING_BASE_ADDR2); 528 writel(0, mmio + XMT_RING_BASE_ADDR3); 529 530 /* Clear CMD0 */ 531 writel(CMD0_CLEAR,mmio + CMD0); 532 533 /* Clear CMD2 */ 534 writel(CMD2_CLEAR, mmio +CMD2); 535 536 /* Clear CMD7 */ 537 writel(CMD7_CLEAR , mmio + CMD7); 538 539 /* Clear DLY_INT_A and DLY_INT_B */ 540 writel(0x0, mmio + DLY_INT_A); 541 writel(0x0, mmio + DLY_INT_B); 542 543 /* Clear FLOW_CONTROL */ 544 writel(0x0, mmio + FLOW_CONTROL); 545 546 /* Clear INT0 write 1 to clear register */ 547 reg_val = readl(mmio + INT0); 548 writel(reg_val, mmio + INT0); 549 550 /* Clear STVAL */ 551 writel(0x0, mmio + STVAL); 552 553 /* Clear INTEN0 */ 554 writel( INTEN0_CLEAR, mmio + INTEN0); 555 556 /* Clear LADRF */ 557 writel(0x0 , mmio + LADRF); 558 559 /* Set SRAM_SIZE & SRAM_BOUNDARY registers */ 560 writel( 0x80010,mmio + SRAM_SIZE); 561 562 /* Clear RCV_RING0_LEN */ 563 writel(0x0, mmio + RCV_RING_LEN0); 564 565 /* Clear XMT_RING0/1/2/3_LEN */ 566 writel(0x0, mmio + XMT_RING_LEN0); 567 writel(0x0, mmio + XMT_RING_LEN1); 568 writel(0x0, mmio + XMT_RING_LEN2); 569 writel(0x0, mmio + XMT_RING_LEN3); 570 571 /* Clear XMT_RING_LIMIT */ 572 writel(0x0, mmio + XMT_RING_LIMIT); 573 574 /* Clear MIB */ 575 writew(MIB_CLEAR, mmio + MIB_ADDR); 576 577 /* Clear LARF */ 578 amd8111e_writeq(*(u64 *)logic_filter, mmio + LADRF); 579 580 /* SRAM_SIZE register */ 581 reg_val = readl(mmio + SRAM_SIZE); 582 583 if(lp->options & OPTION_JUMBO_ENABLE) 584 writel( VAL2|JUMBO, mmio + CMD3); 585 #if AMD8111E_VLAN_TAG_USED 586 writel(VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3 ); 587 #endif 588 /* Set default value to CTRL1 Register */ 589 writel(CTRL1_DEFAULT, mmio + CTRL1); 590 591 /* To avoid PCI posting bug */ 592 readl(mmio + CMD2); 593 594 } 595 596 /* This function disables the interrupt and clears all the pending 597 * interrupts in INT0 598 */ 599 static void amd8111e_disable_interrupt(struct amd8111e_priv *lp) 600 { 601 u32 intr0; 602 603 /* Disable interrupt */ 604 writel(INTREN, lp->mmio + CMD0); 605 606 /* Clear INT0 */ 607 intr0 = readl(lp->mmio + INT0); 608 writel(intr0, lp->mmio + INT0); 609 610 /* To avoid PCI posting bug */ 611 readl(lp->mmio + INT0); 612 613 } 614 615 /* This function stops the chip. */ 616 static void amd8111e_stop_chip(struct amd8111e_priv *lp) 617 { 618 writel(RUN, lp->mmio + CMD0); 619 620 /* To avoid PCI posting bug */ 621 readl(lp->mmio + CMD0); 622 } 623 624 /* This function frees the transmiter and receiver descriptor rings. */ 625 static void amd8111e_free_ring(struct amd8111e_priv *lp) 626 { 627 /* Free transmit and receive descriptor rings */ 628 if(lp->rx_ring){ 629 pci_free_consistent(lp->pci_dev, 630 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR, 631 lp->rx_ring, lp->rx_ring_dma_addr); 632 lp->rx_ring = NULL; 633 } 634 635 if(lp->tx_ring){ 636 pci_free_consistent(lp->pci_dev, 637 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR, 638 lp->tx_ring, lp->tx_ring_dma_addr); 639 640 lp->tx_ring = NULL; 641 } 642 643 } 644 645 /* This function will free all the transmit skbs that are actually 646 * transmitted by the device. It will check the ownership of the 647 * skb before freeing the skb. 648 */ 649 static int amd8111e_tx(struct net_device *dev) 650 { 651 struct amd8111e_priv *lp = netdev_priv(dev); 652 int tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK; 653 int status; 654 /* Complete all the transmit packet */ 655 while (lp->tx_complete_idx != lp->tx_idx){ 656 tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK; 657 status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags); 658 659 if(status & OWN_BIT) 660 break; /* It still hasn't been Txed */ 661 662 lp->tx_ring[tx_index].buff_phy_addr = 0; 663 664 /* We must free the original skb */ 665 if (lp->tx_skbuff[tx_index]) { 666 pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[tx_index], 667 lp->tx_skbuff[tx_index]->len, 668 PCI_DMA_TODEVICE); 669 dev_kfree_skb_irq (lp->tx_skbuff[tx_index]); 670 lp->tx_skbuff[tx_index] = NULL; 671 lp->tx_dma_addr[tx_index] = 0; 672 } 673 lp->tx_complete_idx++; 674 /*COAL update tx coalescing parameters */ 675 lp->coal_conf.tx_packets++; 676 lp->coal_conf.tx_bytes += 677 le16_to_cpu(lp->tx_ring[tx_index].buff_count); 678 679 if (netif_queue_stopped(dev) && 680 lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS +2){ 681 /* The ring is no longer full, clear tbusy. */ 682 /* lp->tx_full = 0; */ 683 netif_wake_queue (dev); 684 } 685 } 686 return 0; 687 } 688 689 /* This function handles the driver receive operation in polling mode */ 690 static int amd8111e_rx_poll(struct napi_struct *napi, int budget) 691 { 692 struct amd8111e_priv *lp = container_of(napi, struct amd8111e_priv, napi); 693 struct net_device *dev = lp->amd8111e_net_dev; 694 int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK; 695 void __iomem *mmio = lp->mmio; 696 struct sk_buff *skb,*new_skb; 697 int min_pkt_len, status; 698 int num_rx_pkt = 0; 699 short pkt_len; 700 #if AMD8111E_VLAN_TAG_USED 701 short vtag; 702 #endif 703 704 while (num_rx_pkt < budget) { 705 status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags); 706 if (status & OWN_BIT) 707 break; 708 709 /* There is a tricky error noted by John Murphy, 710 * <murf@perftech.com> to Russ Nelson: Even with 711 * full-sized * buffers it's possible for a 712 * jabber packet to use two buffers, with only 713 * the last correctly noting the error. 714 */ 715 if (status & ERR_BIT) { 716 /* resetting flags */ 717 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 718 goto err_next_pkt; 719 } 720 /* check for STP and ENP */ 721 if (!((status & STP_BIT) && (status & ENP_BIT))){ 722 /* resetting flags */ 723 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 724 goto err_next_pkt; 725 } 726 pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4; 727 728 #if AMD8111E_VLAN_TAG_USED 729 vtag = status & TT_MASK; 730 /* MAC will strip vlan tag */ 731 if (vtag != 0) 732 min_pkt_len = MIN_PKT_LEN - 4; 733 else 734 #endif 735 min_pkt_len = MIN_PKT_LEN; 736 737 if (pkt_len < min_pkt_len) { 738 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 739 lp->drv_rx_errors++; 740 goto err_next_pkt; 741 } 742 new_skb = netdev_alloc_skb(dev, lp->rx_buff_len); 743 if (!new_skb) { 744 /* if allocation fail, 745 * ignore that pkt and go to next one 746 */ 747 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 748 lp->drv_rx_errors++; 749 goto err_next_pkt; 750 } 751 752 skb_reserve(new_skb, 2); 753 skb = lp->rx_skbuff[rx_index]; 754 pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[rx_index], 755 lp->rx_buff_len-2, PCI_DMA_FROMDEVICE); 756 skb_put(skb, pkt_len); 757 lp->rx_skbuff[rx_index] = new_skb; 758 lp->rx_dma_addr[rx_index] = pci_map_single(lp->pci_dev, 759 new_skb->data, 760 lp->rx_buff_len-2, 761 PCI_DMA_FROMDEVICE); 762 763 skb->protocol = eth_type_trans(skb, dev); 764 765 #if AMD8111E_VLAN_TAG_USED 766 if (vtag == TT_VLAN_TAGGED){ 767 u16 vlan_tag = le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info); 768 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); 769 } 770 #endif 771 napi_gro_receive(napi, skb); 772 /* COAL update rx coalescing parameters */ 773 lp->coal_conf.rx_packets++; 774 lp->coal_conf.rx_bytes += pkt_len; 775 num_rx_pkt++; 776 777 err_next_pkt: 778 lp->rx_ring[rx_index].buff_phy_addr 779 = cpu_to_le32(lp->rx_dma_addr[rx_index]); 780 lp->rx_ring[rx_index].buff_count = 781 cpu_to_le16(lp->rx_buff_len-2); 782 wmb(); 783 lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT); 784 rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK; 785 } 786 787 if (num_rx_pkt < budget && napi_complete_done(napi, num_rx_pkt)) { 788 unsigned long flags; 789 790 /* Receive descriptor is empty now */ 791 spin_lock_irqsave(&lp->lock, flags); 792 writel(VAL0|RINTEN0, mmio + INTEN0); 793 writel(VAL2 | RDMD0, mmio + CMD0); 794 spin_unlock_irqrestore(&lp->lock, flags); 795 } 796 797 return num_rx_pkt; 798 } 799 800 /* This function will indicate the link status to the kernel. */ 801 static int amd8111e_link_change(struct net_device *dev) 802 { 803 struct amd8111e_priv *lp = netdev_priv(dev); 804 int status0,speed; 805 806 /* read the link change */ 807 status0 = readl(lp->mmio + STAT0); 808 809 if(status0 & LINK_STATS){ 810 if(status0 & AUTONEG_COMPLETE) 811 lp->link_config.autoneg = AUTONEG_ENABLE; 812 else 813 lp->link_config.autoneg = AUTONEG_DISABLE; 814 815 if(status0 & FULL_DPLX) 816 lp->link_config.duplex = DUPLEX_FULL; 817 else 818 lp->link_config.duplex = DUPLEX_HALF; 819 speed = (status0 & SPEED_MASK) >> 7; 820 if(speed == PHY_SPEED_10) 821 lp->link_config.speed = SPEED_10; 822 else if(speed == PHY_SPEED_100) 823 lp->link_config.speed = SPEED_100; 824 825 netdev_info(dev, "Link is Up. Speed is %s Mbps %s Duplex\n", 826 (lp->link_config.speed == SPEED_100) ? 827 "100" : "10", 828 (lp->link_config.duplex == DUPLEX_FULL) ? 829 "Full" : "Half"); 830 831 netif_carrier_on(dev); 832 } 833 else{ 834 lp->link_config.speed = SPEED_INVALID; 835 lp->link_config.duplex = DUPLEX_INVALID; 836 lp->link_config.autoneg = AUTONEG_INVALID; 837 netdev_info(dev, "Link is Down.\n"); 838 netif_carrier_off(dev); 839 } 840 841 return 0; 842 } 843 844 /* This function reads the mib counters. */ 845 static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER) 846 { 847 unsigned int status; 848 unsigned int data; 849 unsigned int repeat = REPEAT_CNT; 850 851 writew( MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR); 852 do { 853 status = readw(mmio + MIB_ADDR); 854 udelay(2); /* controller takes MAX 2 us to get mib data */ 855 } 856 while (--repeat && (status & MIB_CMD_ACTIVE)); 857 858 data = readl(mmio + MIB_DATA); 859 return data; 860 } 861 862 /* This function reads the mib registers and returns the hardware statistics. 863 * It updates previous internal driver statistics with new values. 864 */ 865 static struct net_device_stats *amd8111e_get_stats(struct net_device *dev) 866 { 867 struct amd8111e_priv *lp = netdev_priv(dev); 868 void __iomem *mmio = lp->mmio; 869 unsigned long flags; 870 struct net_device_stats *new_stats = &dev->stats; 871 872 if (!lp->opened) 873 return new_stats; 874 spin_lock_irqsave (&lp->lock, flags); 875 876 /* stats.rx_packets */ 877 new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+ 878 amd8111e_read_mib(mmio, rcv_multicast_pkts)+ 879 amd8111e_read_mib(mmio, rcv_unicast_pkts); 880 881 /* stats.tx_packets */ 882 new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets); 883 884 /*stats.rx_bytes */ 885 new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets); 886 887 /* stats.tx_bytes */ 888 new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets); 889 890 /* stats.rx_errors */ 891 /* hw errors + errors driver reported */ 892 new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+ 893 amd8111e_read_mib(mmio, rcv_fragments)+ 894 amd8111e_read_mib(mmio, rcv_jabbers)+ 895 amd8111e_read_mib(mmio, rcv_alignment_errors)+ 896 amd8111e_read_mib(mmio, rcv_fcs_errors)+ 897 amd8111e_read_mib(mmio, rcv_miss_pkts)+ 898 lp->drv_rx_errors; 899 900 /* stats.tx_errors */ 901 new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts); 902 903 /* stats.rx_dropped*/ 904 new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts); 905 906 /* stats.tx_dropped*/ 907 new_stats->tx_dropped = amd8111e_read_mib(mmio, xmt_underrun_pkts); 908 909 /* stats.multicast*/ 910 new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts); 911 912 /* stats.collisions*/ 913 new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions); 914 915 /* stats.rx_length_errors*/ 916 new_stats->rx_length_errors = 917 amd8111e_read_mib(mmio, rcv_undersize_pkts)+ 918 amd8111e_read_mib(mmio, rcv_oversize_pkts); 919 920 /* stats.rx_over_errors*/ 921 new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); 922 923 /* stats.rx_crc_errors*/ 924 new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors); 925 926 /* stats.rx_frame_errors*/ 927 new_stats->rx_frame_errors = 928 amd8111e_read_mib(mmio, rcv_alignment_errors); 929 930 /* stats.rx_fifo_errors */ 931 new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); 932 933 /* stats.rx_missed_errors */ 934 new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); 935 936 /* stats.tx_aborted_errors*/ 937 new_stats->tx_aborted_errors = 938 amd8111e_read_mib(mmio, xmt_excessive_collision); 939 940 /* stats.tx_carrier_errors*/ 941 new_stats->tx_carrier_errors = 942 amd8111e_read_mib(mmio, xmt_loss_carrier); 943 944 /* stats.tx_fifo_errors*/ 945 new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts); 946 947 /* stats.tx_window_errors*/ 948 new_stats->tx_window_errors = 949 amd8111e_read_mib(mmio, xmt_late_collision); 950 951 /* Reset the mibs for collecting new statistics */ 952 /* writew(MIB_CLEAR, mmio + MIB_ADDR);*/ 953 954 spin_unlock_irqrestore (&lp->lock, flags); 955 956 return new_stats; 957 } 958 959 /* This function recalculate the interrupt coalescing mode on every interrupt 960 * according to the datarate and the packet rate. 961 */ 962 static int amd8111e_calc_coalesce(struct net_device *dev) 963 { 964 struct amd8111e_priv *lp = netdev_priv(dev); 965 struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf; 966 int tx_pkt_rate; 967 int rx_pkt_rate; 968 int tx_data_rate; 969 int rx_data_rate; 970 int rx_pkt_size; 971 int tx_pkt_size; 972 973 tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets; 974 coal_conf->tx_prev_packets = coal_conf->tx_packets; 975 976 tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes; 977 coal_conf->tx_prev_bytes = coal_conf->tx_bytes; 978 979 rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets; 980 coal_conf->rx_prev_packets = coal_conf->rx_packets; 981 982 rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes; 983 coal_conf->rx_prev_bytes = coal_conf->rx_bytes; 984 985 if(rx_pkt_rate < 800){ 986 if(coal_conf->rx_coal_type != NO_COALESCE){ 987 988 coal_conf->rx_timeout = 0x0; 989 coal_conf->rx_event_count = 0; 990 amd8111e_set_coalesce(dev,RX_INTR_COAL); 991 coal_conf->rx_coal_type = NO_COALESCE; 992 } 993 } 994 else{ 995 996 rx_pkt_size = rx_data_rate/rx_pkt_rate; 997 if (rx_pkt_size < 128){ 998 if(coal_conf->rx_coal_type != NO_COALESCE){ 999 1000 coal_conf->rx_timeout = 0; 1001 coal_conf->rx_event_count = 0; 1002 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1003 coal_conf->rx_coal_type = NO_COALESCE; 1004 } 1005 1006 } 1007 else if ( (rx_pkt_size >= 128) && (rx_pkt_size < 512) ){ 1008 1009 if(coal_conf->rx_coal_type != LOW_COALESCE){ 1010 coal_conf->rx_timeout = 1; 1011 coal_conf->rx_event_count = 4; 1012 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1013 coal_conf->rx_coal_type = LOW_COALESCE; 1014 } 1015 } 1016 else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)){ 1017 1018 if(coal_conf->rx_coal_type != MEDIUM_COALESCE){ 1019 coal_conf->rx_timeout = 1; 1020 coal_conf->rx_event_count = 4; 1021 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1022 coal_conf->rx_coal_type = MEDIUM_COALESCE; 1023 } 1024 1025 } 1026 else if(rx_pkt_size >= 1024){ 1027 if(coal_conf->rx_coal_type != HIGH_COALESCE){ 1028 coal_conf->rx_timeout = 2; 1029 coal_conf->rx_event_count = 3; 1030 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1031 coal_conf->rx_coal_type = HIGH_COALESCE; 1032 } 1033 } 1034 } 1035 /* NOW FOR TX INTR COALESC */ 1036 if(tx_pkt_rate < 800){ 1037 if(coal_conf->tx_coal_type != NO_COALESCE){ 1038 1039 coal_conf->tx_timeout = 0x0; 1040 coal_conf->tx_event_count = 0; 1041 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1042 coal_conf->tx_coal_type = NO_COALESCE; 1043 } 1044 } 1045 else{ 1046 1047 tx_pkt_size = tx_data_rate/tx_pkt_rate; 1048 if (tx_pkt_size < 128){ 1049 1050 if(coal_conf->tx_coal_type != NO_COALESCE){ 1051 1052 coal_conf->tx_timeout = 0; 1053 coal_conf->tx_event_count = 0; 1054 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1055 coal_conf->tx_coal_type = NO_COALESCE; 1056 } 1057 1058 } 1059 else if ( (tx_pkt_size >= 128) && (tx_pkt_size < 512) ){ 1060 1061 if(coal_conf->tx_coal_type != LOW_COALESCE){ 1062 coal_conf->tx_timeout = 1; 1063 coal_conf->tx_event_count = 2; 1064 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1065 coal_conf->tx_coal_type = LOW_COALESCE; 1066 1067 } 1068 } 1069 else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)){ 1070 1071 if(coal_conf->tx_coal_type != MEDIUM_COALESCE){ 1072 coal_conf->tx_timeout = 2; 1073 coal_conf->tx_event_count = 5; 1074 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1075 coal_conf->tx_coal_type = MEDIUM_COALESCE; 1076 } 1077 1078 } 1079 else if(tx_pkt_size >= 1024){ 1080 if (tx_pkt_size >= 1024){ 1081 if(coal_conf->tx_coal_type != HIGH_COALESCE){ 1082 coal_conf->tx_timeout = 4; 1083 coal_conf->tx_event_count = 8; 1084 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1085 coal_conf->tx_coal_type = HIGH_COALESCE; 1086 } 1087 } 1088 } 1089 } 1090 return 0; 1091 1092 } 1093 1094 /* This is device interrupt function. It handles transmit, 1095 * receive,link change and hardware timer interrupts. 1096 */ 1097 static irqreturn_t amd8111e_interrupt(int irq, void *dev_id) 1098 { 1099 1100 struct net_device *dev = (struct net_device *)dev_id; 1101 struct amd8111e_priv *lp = netdev_priv(dev); 1102 void __iomem *mmio = lp->mmio; 1103 unsigned int intr0, intren0; 1104 unsigned int handled = 1; 1105 1106 if(unlikely(dev == NULL)) 1107 return IRQ_NONE; 1108 1109 spin_lock(&lp->lock); 1110 1111 /* disabling interrupt */ 1112 writel(INTREN, mmio + CMD0); 1113 1114 /* Read interrupt status */ 1115 intr0 = readl(mmio + INT0); 1116 intren0 = readl(mmio + INTEN0); 1117 1118 /* Process all the INT event until INTR bit is clear. */ 1119 1120 if (!(intr0 & INTR)){ 1121 handled = 0; 1122 goto err_no_interrupt; 1123 } 1124 1125 /* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */ 1126 writel(intr0, mmio + INT0); 1127 1128 /* Check if Receive Interrupt has occurred. */ 1129 if (intr0 & RINT0) { 1130 if (napi_schedule_prep(&lp->napi)) { 1131 /* Disable receive interupts */ 1132 writel(RINTEN0, mmio + INTEN0); 1133 /* Schedule a polling routine */ 1134 __napi_schedule(&lp->napi); 1135 } else if (intren0 & RINTEN0) { 1136 netdev_dbg(dev, "************Driver bug! interrupt while in poll\n"); 1137 /* Fix by disable receive interrupts */ 1138 writel(RINTEN0, mmio + INTEN0); 1139 } 1140 } 1141 1142 /* Check if Transmit Interrupt has occurred. */ 1143 if (intr0 & TINT0) 1144 amd8111e_tx(dev); 1145 1146 /* Check if Link Change Interrupt has occurred. */ 1147 if (intr0 & LCINT) 1148 amd8111e_link_change(dev); 1149 1150 /* Check if Hardware Timer Interrupt has occurred. */ 1151 if (intr0 & STINT) 1152 amd8111e_calc_coalesce(dev); 1153 1154 err_no_interrupt: 1155 writel( VAL0 | INTREN,mmio + CMD0); 1156 1157 spin_unlock(&lp->lock); 1158 1159 return IRQ_RETVAL(handled); 1160 } 1161 1162 #ifdef CONFIG_NET_POLL_CONTROLLER 1163 static void amd8111e_poll(struct net_device *dev) 1164 { 1165 unsigned long flags; 1166 local_irq_save(flags); 1167 amd8111e_interrupt(0, dev); 1168 local_irq_restore(flags); 1169 } 1170 #endif 1171 1172 1173 /* This function closes the network interface and updates 1174 * the statistics so that most recent statistics will be 1175 * available after the interface is down. 1176 */ 1177 static int amd8111e_close(struct net_device *dev) 1178 { 1179 struct amd8111e_priv *lp = netdev_priv(dev); 1180 netif_stop_queue(dev); 1181 1182 napi_disable(&lp->napi); 1183 1184 spin_lock_irq(&lp->lock); 1185 1186 amd8111e_disable_interrupt(lp); 1187 amd8111e_stop_chip(lp); 1188 1189 /* Free transmit and receive skbs */ 1190 amd8111e_free_skbs(lp->amd8111e_net_dev); 1191 1192 netif_carrier_off(lp->amd8111e_net_dev); 1193 1194 /* Delete ipg timer */ 1195 if(lp->options & OPTION_DYN_IPG_ENABLE) 1196 del_timer_sync(&lp->ipg_data.ipg_timer); 1197 1198 spin_unlock_irq(&lp->lock); 1199 free_irq(dev->irq, dev); 1200 amd8111e_free_ring(lp); 1201 1202 /* Update the statistics before closing */ 1203 amd8111e_get_stats(dev); 1204 lp->opened = 0; 1205 return 0; 1206 } 1207 1208 /* This function opens new interface.It requests irq for the device, 1209 * initializes the device,buffers and descriptors, and starts the device. 1210 */ 1211 static int amd8111e_open(struct net_device *dev) 1212 { 1213 struct amd8111e_priv *lp = netdev_priv(dev); 1214 1215 if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED, 1216 dev->name, dev)) 1217 return -EAGAIN; 1218 1219 napi_enable(&lp->napi); 1220 1221 spin_lock_irq(&lp->lock); 1222 1223 amd8111e_init_hw_default(lp); 1224 1225 if(amd8111e_restart(dev)){ 1226 spin_unlock_irq(&lp->lock); 1227 napi_disable(&lp->napi); 1228 if (dev->irq) 1229 free_irq(dev->irq, dev); 1230 return -ENOMEM; 1231 } 1232 /* Start ipg timer */ 1233 if(lp->options & OPTION_DYN_IPG_ENABLE){ 1234 add_timer(&lp->ipg_data.ipg_timer); 1235 netdev_info(dev, "Dynamic IPG Enabled\n"); 1236 } 1237 1238 lp->opened = 1; 1239 1240 spin_unlock_irq(&lp->lock); 1241 1242 netif_start_queue(dev); 1243 1244 return 0; 1245 } 1246 1247 /* This function checks if there is any transmit descriptors 1248 * available to queue more packet. 1249 */ 1250 static int amd8111e_tx_queue_avail(struct amd8111e_priv *lp) 1251 { 1252 int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK; 1253 if (lp->tx_skbuff[tx_index]) 1254 return -1; 1255 else 1256 return 0; 1257 1258 } 1259 1260 /* This function will queue the transmit packets to the 1261 * descriptors and will trigger the send operation. It also 1262 * initializes the transmit descriptors with buffer physical address, 1263 * byte count, ownership to hardware etc. 1264 */ 1265 static netdev_tx_t amd8111e_start_xmit(struct sk_buff *skb, 1266 struct net_device *dev) 1267 { 1268 struct amd8111e_priv *lp = netdev_priv(dev); 1269 int tx_index; 1270 unsigned long flags; 1271 1272 spin_lock_irqsave(&lp->lock, flags); 1273 1274 tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK; 1275 1276 lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len); 1277 1278 lp->tx_skbuff[tx_index] = skb; 1279 lp->tx_ring[tx_index].tx_flags = 0; 1280 1281 #if AMD8111E_VLAN_TAG_USED 1282 if (skb_vlan_tag_present(skb)) { 1283 lp->tx_ring[tx_index].tag_ctrl_cmd |= 1284 cpu_to_le16(TCC_VLAN_INSERT); 1285 lp->tx_ring[tx_index].tag_ctrl_info = 1286 cpu_to_le16(skb_vlan_tag_get(skb)); 1287 1288 } 1289 #endif 1290 lp->tx_dma_addr[tx_index] = 1291 pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE); 1292 lp->tx_ring[tx_index].buff_phy_addr = 1293 cpu_to_le32(lp->tx_dma_addr[tx_index]); 1294 1295 /* Set FCS and LTINT bits */ 1296 wmb(); 1297 lp->tx_ring[tx_index].tx_flags |= 1298 cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT); 1299 1300 lp->tx_idx++; 1301 1302 /* Trigger an immediate send poll. */ 1303 writel( VAL1 | TDMD0, lp->mmio + CMD0); 1304 writel( VAL2 | RDMD0,lp->mmio + CMD0); 1305 1306 if(amd8111e_tx_queue_avail(lp) < 0){ 1307 netif_stop_queue(dev); 1308 } 1309 spin_unlock_irqrestore(&lp->lock, flags); 1310 return NETDEV_TX_OK; 1311 } 1312 /* This function returns all the memory mapped registers of the device. */ 1313 static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf) 1314 { 1315 void __iomem *mmio = lp->mmio; 1316 /* Read only necessary registers */ 1317 buf[0] = readl(mmio + XMT_RING_BASE_ADDR0); 1318 buf[1] = readl(mmio + XMT_RING_LEN0); 1319 buf[2] = readl(mmio + RCV_RING_BASE_ADDR0); 1320 buf[3] = readl(mmio + RCV_RING_LEN0); 1321 buf[4] = readl(mmio + CMD0); 1322 buf[5] = readl(mmio + CMD2); 1323 buf[6] = readl(mmio + CMD3); 1324 buf[7] = readl(mmio + CMD7); 1325 buf[8] = readl(mmio + INT0); 1326 buf[9] = readl(mmio + INTEN0); 1327 buf[10] = readl(mmio + LADRF); 1328 buf[11] = readl(mmio + LADRF+4); 1329 buf[12] = readl(mmio + STAT0); 1330 } 1331 1332 1333 /* This function sets promiscuos mode, all-multi mode or the multicast address 1334 * list to the device. 1335 */ 1336 static void amd8111e_set_multicast_list(struct net_device *dev) 1337 { 1338 struct netdev_hw_addr *ha; 1339 struct amd8111e_priv *lp = netdev_priv(dev); 1340 u32 mc_filter[2] ; 1341 int bit_num; 1342 1343 if(dev->flags & IFF_PROMISC){ 1344 writel( VAL2 | PROM, lp->mmio + CMD2); 1345 return; 1346 } 1347 else 1348 writel( PROM, lp->mmio + CMD2); 1349 if (dev->flags & IFF_ALLMULTI || 1350 netdev_mc_count(dev) > MAX_FILTER_SIZE) { 1351 /* get all multicast packet */ 1352 mc_filter[1] = mc_filter[0] = 0xffffffff; 1353 lp->options |= OPTION_MULTICAST_ENABLE; 1354 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF); 1355 return; 1356 } 1357 if (netdev_mc_empty(dev)) { 1358 /* get only own packets */ 1359 mc_filter[1] = mc_filter[0] = 0; 1360 lp->options &= ~OPTION_MULTICAST_ENABLE; 1361 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF); 1362 /* disable promiscuous mode */ 1363 writel(PROM, lp->mmio + CMD2); 1364 return; 1365 } 1366 /* load all the multicast addresses in the logic filter */ 1367 lp->options |= OPTION_MULTICAST_ENABLE; 1368 mc_filter[1] = mc_filter[0] = 0; 1369 netdev_for_each_mc_addr(ha, dev) { 1370 bit_num = (ether_crc_le(ETH_ALEN, ha->addr) >> 26) & 0x3f; 1371 mc_filter[bit_num >> 5] |= 1 << (bit_num & 31); 1372 } 1373 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF); 1374 1375 /* To eliminate PCI posting bug */ 1376 readl(lp->mmio + CMD2); 1377 1378 } 1379 1380 static void amd8111e_get_drvinfo(struct net_device *dev, 1381 struct ethtool_drvinfo *info) 1382 { 1383 struct amd8111e_priv *lp = netdev_priv(dev); 1384 struct pci_dev *pci_dev = lp->pci_dev; 1385 strlcpy(info->driver, MODULE_NAME, sizeof(info->driver)); 1386 strlcpy(info->version, MODULE_VERS, sizeof(info->version)); 1387 snprintf(info->fw_version, sizeof(info->fw_version), 1388 "%u", chip_version); 1389 strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info)); 1390 } 1391 1392 static int amd8111e_get_regs_len(struct net_device *dev) 1393 { 1394 return AMD8111E_REG_DUMP_LEN; 1395 } 1396 1397 static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf) 1398 { 1399 struct amd8111e_priv *lp = netdev_priv(dev); 1400 regs->version = 0; 1401 amd8111e_read_regs(lp, buf); 1402 } 1403 1404 static int amd8111e_get_link_ksettings(struct net_device *dev, 1405 struct ethtool_link_ksettings *cmd) 1406 { 1407 struct amd8111e_priv *lp = netdev_priv(dev); 1408 spin_lock_irq(&lp->lock); 1409 mii_ethtool_get_link_ksettings(&lp->mii_if, cmd); 1410 spin_unlock_irq(&lp->lock); 1411 return 0; 1412 } 1413 1414 static int amd8111e_set_link_ksettings(struct net_device *dev, 1415 const struct ethtool_link_ksettings *cmd) 1416 { 1417 struct amd8111e_priv *lp = netdev_priv(dev); 1418 int res; 1419 spin_lock_irq(&lp->lock); 1420 res = mii_ethtool_set_link_ksettings(&lp->mii_if, cmd); 1421 spin_unlock_irq(&lp->lock); 1422 return res; 1423 } 1424 1425 static int amd8111e_nway_reset(struct net_device *dev) 1426 { 1427 struct amd8111e_priv *lp = netdev_priv(dev); 1428 return mii_nway_restart(&lp->mii_if); 1429 } 1430 1431 static u32 amd8111e_get_link(struct net_device *dev) 1432 { 1433 struct amd8111e_priv *lp = netdev_priv(dev); 1434 return mii_link_ok(&lp->mii_if); 1435 } 1436 1437 static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info) 1438 { 1439 struct amd8111e_priv *lp = netdev_priv(dev); 1440 wol_info->supported = WAKE_MAGIC|WAKE_PHY; 1441 if (lp->options & OPTION_WOL_ENABLE) 1442 wol_info->wolopts = WAKE_MAGIC; 1443 } 1444 1445 static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info) 1446 { 1447 struct amd8111e_priv *lp = netdev_priv(dev); 1448 if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY)) 1449 return -EINVAL; 1450 spin_lock_irq(&lp->lock); 1451 if (wol_info->wolopts & WAKE_MAGIC) 1452 lp->options |= 1453 (OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE); 1454 else if(wol_info->wolopts & WAKE_PHY) 1455 lp->options |= 1456 (OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE); 1457 else 1458 lp->options &= ~OPTION_WOL_ENABLE; 1459 spin_unlock_irq(&lp->lock); 1460 return 0; 1461 } 1462 1463 static const struct ethtool_ops ops = { 1464 .get_drvinfo = amd8111e_get_drvinfo, 1465 .get_regs_len = amd8111e_get_regs_len, 1466 .get_regs = amd8111e_get_regs, 1467 .nway_reset = amd8111e_nway_reset, 1468 .get_link = amd8111e_get_link, 1469 .get_wol = amd8111e_get_wol, 1470 .set_wol = amd8111e_set_wol, 1471 .get_link_ksettings = amd8111e_get_link_ksettings, 1472 .set_link_ksettings = amd8111e_set_link_ksettings, 1473 }; 1474 1475 /* This function handles all the ethtool ioctls. It gives driver info, 1476 * gets/sets driver speed, gets memory mapped register values, forces 1477 * auto negotiation, sets/gets WOL options for ethtool application. 1478 */ 1479 static int amd8111e_ioctl(struct net_device *dev , struct ifreq *ifr, int cmd) 1480 { 1481 struct mii_ioctl_data *data = if_mii(ifr); 1482 struct amd8111e_priv *lp = netdev_priv(dev); 1483 int err; 1484 u32 mii_regval; 1485 1486 switch(cmd) { 1487 case SIOCGMIIPHY: 1488 data->phy_id = lp->ext_phy_addr; 1489 1490 /* fallthru */ 1491 case SIOCGMIIREG: 1492 1493 spin_lock_irq(&lp->lock); 1494 err = amd8111e_read_phy(lp, data->phy_id, 1495 data->reg_num & PHY_REG_ADDR_MASK, &mii_regval); 1496 spin_unlock_irq(&lp->lock); 1497 1498 data->val_out = mii_regval; 1499 return err; 1500 1501 case SIOCSMIIREG: 1502 1503 spin_lock_irq(&lp->lock); 1504 err = amd8111e_write_phy(lp, data->phy_id, 1505 data->reg_num & PHY_REG_ADDR_MASK, data->val_in); 1506 spin_unlock_irq(&lp->lock); 1507 1508 return err; 1509 1510 default: 1511 /* do nothing */ 1512 break; 1513 } 1514 return -EOPNOTSUPP; 1515 } 1516 static int amd8111e_set_mac_address(struct net_device *dev, void *p) 1517 { 1518 struct amd8111e_priv *lp = netdev_priv(dev); 1519 int i; 1520 struct sockaddr *addr = p; 1521 1522 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); 1523 spin_lock_irq(&lp->lock); 1524 /* Setting the MAC address to the device */ 1525 for (i = 0; i < ETH_ALEN; i++) 1526 writeb( dev->dev_addr[i], lp->mmio + PADR + i ); 1527 1528 spin_unlock_irq(&lp->lock); 1529 1530 return 0; 1531 } 1532 1533 /* This function changes the mtu of the device. It restarts the device to 1534 * initialize the descriptor with new receive buffers. 1535 */ 1536 static int amd8111e_change_mtu(struct net_device *dev, int new_mtu) 1537 { 1538 struct amd8111e_priv *lp = netdev_priv(dev); 1539 int err; 1540 1541 if (!netif_running(dev)) { 1542 /* new_mtu will be used 1543 * when device starts netxt time 1544 */ 1545 dev->mtu = new_mtu; 1546 return 0; 1547 } 1548 1549 spin_lock_irq(&lp->lock); 1550 1551 /* stop the chip */ 1552 writel(RUN, lp->mmio + CMD0); 1553 1554 dev->mtu = new_mtu; 1555 1556 err = amd8111e_restart(dev); 1557 spin_unlock_irq(&lp->lock); 1558 if(!err) 1559 netif_start_queue(dev); 1560 return err; 1561 } 1562 1563 static int amd8111e_enable_magicpkt(struct amd8111e_priv *lp) 1564 { 1565 writel( VAL1|MPPLBA, lp->mmio + CMD3); 1566 writel( VAL0|MPEN_SW, lp->mmio + CMD7); 1567 1568 /* To eliminate PCI posting bug */ 1569 readl(lp->mmio + CMD7); 1570 return 0; 1571 } 1572 1573 static int amd8111e_enable_link_change(struct amd8111e_priv *lp) 1574 { 1575 1576 /* Adapter is already stoped/suspended/interrupt-disabled */ 1577 writel(VAL0|LCMODE_SW,lp->mmio + CMD7); 1578 1579 /* To eliminate PCI posting bug */ 1580 readl(lp->mmio + CMD7); 1581 return 0; 1582 } 1583 1584 /* This function is called when a packet transmission fails to complete 1585 * within a reasonable period, on the assumption that an interrupt have 1586 * failed or the interface is locked up. This function will reinitialize 1587 * the hardware. 1588 */ 1589 static void amd8111e_tx_timeout(struct net_device *dev) 1590 { 1591 struct amd8111e_priv *lp = netdev_priv(dev); 1592 int err; 1593 1594 netdev_err(dev, "transmit timed out, resetting\n"); 1595 1596 spin_lock_irq(&lp->lock); 1597 err = amd8111e_restart(dev); 1598 spin_unlock_irq(&lp->lock); 1599 if(!err) 1600 netif_wake_queue(dev); 1601 } 1602 static int amd8111e_suspend(struct pci_dev *pci_dev, pm_message_t state) 1603 { 1604 struct net_device *dev = pci_get_drvdata(pci_dev); 1605 struct amd8111e_priv *lp = netdev_priv(dev); 1606 1607 if (!netif_running(dev)) 1608 return 0; 1609 1610 /* disable the interrupt */ 1611 spin_lock_irq(&lp->lock); 1612 amd8111e_disable_interrupt(lp); 1613 spin_unlock_irq(&lp->lock); 1614 1615 netif_device_detach(dev); 1616 1617 /* stop chip */ 1618 spin_lock_irq(&lp->lock); 1619 if(lp->options & OPTION_DYN_IPG_ENABLE) 1620 del_timer_sync(&lp->ipg_data.ipg_timer); 1621 amd8111e_stop_chip(lp); 1622 spin_unlock_irq(&lp->lock); 1623 1624 if(lp->options & OPTION_WOL_ENABLE){ 1625 /* enable wol */ 1626 if(lp->options & OPTION_WAKE_MAGIC_ENABLE) 1627 amd8111e_enable_magicpkt(lp); 1628 if(lp->options & OPTION_WAKE_PHY_ENABLE) 1629 amd8111e_enable_link_change(lp); 1630 1631 pci_enable_wake(pci_dev, PCI_D3hot, 1); 1632 pci_enable_wake(pci_dev, PCI_D3cold, 1); 1633 1634 } 1635 else{ 1636 pci_enable_wake(pci_dev, PCI_D3hot, 0); 1637 pci_enable_wake(pci_dev, PCI_D3cold, 0); 1638 } 1639 1640 pci_save_state(pci_dev); 1641 pci_set_power_state(pci_dev, PCI_D3hot); 1642 1643 return 0; 1644 } 1645 static int amd8111e_resume(struct pci_dev *pci_dev) 1646 { 1647 struct net_device *dev = pci_get_drvdata(pci_dev); 1648 struct amd8111e_priv *lp = netdev_priv(dev); 1649 1650 if (!netif_running(dev)) 1651 return 0; 1652 1653 pci_set_power_state(pci_dev, PCI_D0); 1654 pci_restore_state(pci_dev); 1655 1656 pci_enable_wake(pci_dev, PCI_D3hot, 0); 1657 pci_enable_wake(pci_dev, PCI_D3cold, 0); /* D3 cold */ 1658 1659 netif_device_attach(dev); 1660 1661 spin_lock_irq(&lp->lock); 1662 amd8111e_restart(dev); 1663 /* Restart ipg timer */ 1664 if(lp->options & OPTION_DYN_IPG_ENABLE) 1665 mod_timer(&lp->ipg_data.ipg_timer, 1666 jiffies + IPG_CONVERGE_JIFFIES); 1667 spin_unlock_irq(&lp->lock); 1668 1669 return 0; 1670 } 1671 1672 static void amd8111e_config_ipg(struct net_device *dev) 1673 { 1674 struct amd8111e_priv *lp = netdev_priv(dev); 1675 struct ipg_info *ipg_data = &lp->ipg_data; 1676 void __iomem *mmio = lp->mmio; 1677 unsigned int prev_col_cnt = ipg_data->col_cnt; 1678 unsigned int total_col_cnt; 1679 unsigned int tmp_ipg; 1680 1681 if(lp->link_config.duplex == DUPLEX_FULL){ 1682 ipg_data->ipg = DEFAULT_IPG; 1683 return; 1684 } 1685 1686 if(ipg_data->ipg_state == SSTATE){ 1687 1688 if(ipg_data->timer_tick == IPG_STABLE_TIME){ 1689 1690 ipg_data->timer_tick = 0; 1691 ipg_data->ipg = MIN_IPG - IPG_STEP; 1692 ipg_data->current_ipg = MIN_IPG; 1693 ipg_data->diff_col_cnt = 0xFFFFFFFF; 1694 ipg_data->ipg_state = CSTATE; 1695 } 1696 else 1697 ipg_data->timer_tick++; 1698 } 1699 1700 if(ipg_data->ipg_state == CSTATE){ 1701 1702 /* Get the current collision count */ 1703 1704 total_col_cnt = ipg_data->col_cnt = 1705 amd8111e_read_mib(mmio, xmt_collisions); 1706 1707 if ((total_col_cnt - prev_col_cnt) < 1708 (ipg_data->diff_col_cnt)){ 1709 1710 ipg_data->diff_col_cnt = 1711 total_col_cnt - prev_col_cnt ; 1712 1713 ipg_data->ipg = ipg_data->current_ipg; 1714 } 1715 1716 ipg_data->current_ipg += IPG_STEP; 1717 1718 if (ipg_data->current_ipg <= MAX_IPG) 1719 tmp_ipg = ipg_data->current_ipg; 1720 else{ 1721 tmp_ipg = ipg_data->ipg; 1722 ipg_data->ipg_state = SSTATE; 1723 } 1724 writew((u32)tmp_ipg, mmio + IPG); 1725 writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1); 1726 } 1727 mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES); 1728 return; 1729 1730 } 1731 1732 static void amd8111e_probe_ext_phy(struct net_device *dev) 1733 { 1734 struct amd8111e_priv *lp = netdev_priv(dev); 1735 int i; 1736 1737 for (i = 0x1e; i >= 0; i--) { 1738 u32 id1, id2; 1739 1740 if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1)) 1741 continue; 1742 if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2)) 1743 continue; 1744 lp->ext_phy_id = (id1 << 16) | id2; 1745 lp->ext_phy_addr = i; 1746 return; 1747 } 1748 lp->ext_phy_id = 0; 1749 lp->ext_phy_addr = 1; 1750 } 1751 1752 static const struct net_device_ops amd8111e_netdev_ops = { 1753 .ndo_open = amd8111e_open, 1754 .ndo_stop = amd8111e_close, 1755 .ndo_start_xmit = amd8111e_start_xmit, 1756 .ndo_tx_timeout = amd8111e_tx_timeout, 1757 .ndo_get_stats = amd8111e_get_stats, 1758 .ndo_set_rx_mode = amd8111e_set_multicast_list, 1759 .ndo_validate_addr = eth_validate_addr, 1760 .ndo_set_mac_address = amd8111e_set_mac_address, 1761 .ndo_do_ioctl = amd8111e_ioctl, 1762 .ndo_change_mtu = amd8111e_change_mtu, 1763 #ifdef CONFIG_NET_POLL_CONTROLLER 1764 .ndo_poll_controller = amd8111e_poll, 1765 #endif 1766 }; 1767 1768 static int amd8111e_probe_one(struct pci_dev *pdev, 1769 const struct pci_device_id *ent) 1770 { 1771 int err, i; 1772 unsigned long reg_addr,reg_len; 1773 struct amd8111e_priv *lp; 1774 struct net_device *dev; 1775 1776 err = pci_enable_device(pdev); 1777 if(err){ 1778 dev_err(&pdev->dev, "Cannot enable new PCI device\n"); 1779 return err; 1780 } 1781 1782 if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){ 1783 dev_err(&pdev->dev, "Cannot find PCI base address\n"); 1784 err = -ENODEV; 1785 goto err_disable_pdev; 1786 } 1787 1788 err = pci_request_regions(pdev, MODULE_NAME); 1789 if(err){ 1790 dev_err(&pdev->dev, "Cannot obtain PCI resources\n"); 1791 goto err_disable_pdev; 1792 } 1793 1794 pci_set_master(pdev); 1795 1796 /* Find power-management capability. */ 1797 if (!pdev->pm_cap) { 1798 dev_err(&pdev->dev, "No Power Management capability\n"); 1799 err = -ENODEV; 1800 goto err_free_reg; 1801 } 1802 1803 /* Initialize DMA */ 1804 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) < 0) { 1805 dev_err(&pdev->dev, "DMA not supported\n"); 1806 err = -ENODEV; 1807 goto err_free_reg; 1808 } 1809 1810 reg_addr = pci_resource_start(pdev, 0); 1811 reg_len = pci_resource_len(pdev, 0); 1812 1813 dev = alloc_etherdev(sizeof(struct amd8111e_priv)); 1814 if (!dev) { 1815 err = -ENOMEM; 1816 goto err_free_reg; 1817 } 1818 1819 SET_NETDEV_DEV(dev, &pdev->dev); 1820 1821 #if AMD8111E_VLAN_TAG_USED 1822 dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX ; 1823 #endif 1824 1825 lp = netdev_priv(dev); 1826 lp->pci_dev = pdev; 1827 lp->amd8111e_net_dev = dev; 1828 lp->pm_cap = pdev->pm_cap; 1829 1830 spin_lock_init(&lp->lock); 1831 1832 lp->mmio = devm_ioremap(&pdev->dev, reg_addr, reg_len); 1833 if (!lp->mmio) { 1834 dev_err(&pdev->dev, "Cannot map device registers\n"); 1835 err = -ENOMEM; 1836 goto err_free_dev; 1837 } 1838 1839 /* Initializing MAC address */ 1840 for (i = 0; i < ETH_ALEN; i++) 1841 dev->dev_addr[i] = readb(lp->mmio + PADR + i); 1842 1843 /* Setting user defined parametrs */ 1844 lp->ext_phy_option = speed_duplex[card_idx]; 1845 if(coalesce[card_idx]) 1846 lp->options |= OPTION_INTR_COAL_ENABLE; 1847 if(dynamic_ipg[card_idx++]) 1848 lp->options |= OPTION_DYN_IPG_ENABLE; 1849 1850 1851 /* Initialize driver entry points */ 1852 dev->netdev_ops = &amd8111e_netdev_ops; 1853 dev->ethtool_ops = &ops; 1854 dev->irq =pdev->irq; 1855 dev->watchdog_timeo = AMD8111E_TX_TIMEOUT; 1856 dev->min_mtu = AMD8111E_MIN_MTU; 1857 dev->max_mtu = AMD8111E_MAX_MTU; 1858 netif_napi_add(dev, &lp->napi, amd8111e_rx_poll, 32); 1859 1860 #if AMD8111E_VLAN_TAG_USED 1861 dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX; 1862 #endif 1863 /* Probe the external PHY */ 1864 amd8111e_probe_ext_phy(dev); 1865 1866 /* setting mii default values */ 1867 lp->mii_if.dev = dev; 1868 lp->mii_if.mdio_read = amd8111e_mdio_read; 1869 lp->mii_if.mdio_write = amd8111e_mdio_write; 1870 lp->mii_if.phy_id = lp->ext_phy_addr; 1871 1872 /* Set receive buffer length and set jumbo option*/ 1873 amd8111e_set_rx_buff_len(dev); 1874 1875 1876 err = register_netdev(dev); 1877 if (err) { 1878 dev_err(&pdev->dev, "Cannot register net device\n"); 1879 goto err_free_dev; 1880 } 1881 1882 pci_set_drvdata(pdev, dev); 1883 1884 /* Initialize software ipg timer */ 1885 if(lp->options & OPTION_DYN_IPG_ENABLE){ 1886 init_timer(&lp->ipg_data.ipg_timer); 1887 lp->ipg_data.ipg_timer.data = (unsigned long) dev; 1888 lp->ipg_data.ipg_timer.function = (void *)&amd8111e_config_ipg; 1889 lp->ipg_data.ipg_timer.expires = jiffies + 1890 IPG_CONVERGE_JIFFIES; 1891 lp->ipg_data.ipg = DEFAULT_IPG; 1892 lp->ipg_data.ipg_state = CSTATE; 1893 } 1894 1895 /* display driver and device information */ 1896 chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28; 1897 dev_info(&pdev->dev, "AMD-8111e Driver Version: %s\n", MODULE_VERS); 1898 dev_info(&pdev->dev, "[ Rev %x ] PCI 10/100BaseT Ethernet %pM\n", 1899 chip_version, dev->dev_addr); 1900 if (lp->ext_phy_id) 1901 dev_info(&pdev->dev, "Found MII PHY ID 0x%08x at address 0x%02x\n", 1902 lp->ext_phy_id, lp->ext_phy_addr); 1903 else 1904 dev_info(&pdev->dev, "Couldn't detect MII PHY, assuming address 0x01\n"); 1905 1906 return 0; 1907 1908 err_free_dev: 1909 free_netdev(dev); 1910 1911 err_free_reg: 1912 pci_release_regions(pdev); 1913 1914 err_disable_pdev: 1915 pci_disable_device(pdev); 1916 return err; 1917 1918 } 1919 1920 static void amd8111e_remove_one(struct pci_dev *pdev) 1921 { 1922 struct net_device *dev = pci_get_drvdata(pdev); 1923 1924 if (dev) { 1925 unregister_netdev(dev); 1926 free_netdev(dev); 1927 pci_release_regions(pdev); 1928 pci_disable_device(pdev); 1929 } 1930 } 1931 1932 static const struct pci_device_id amd8111e_pci_tbl[] = { 1933 { 1934 .vendor = PCI_VENDOR_ID_AMD, 1935 .device = PCI_DEVICE_ID_AMD8111E_7462, 1936 }, 1937 { 1938 .vendor = 0, 1939 } 1940 }; 1941 MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl); 1942 1943 static struct pci_driver amd8111e_driver = { 1944 .name = MODULE_NAME, 1945 .id_table = amd8111e_pci_tbl, 1946 .probe = amd8111e_probe_one, 1947 .remove = amd8111e_remove_one, 1948 .suspend = amd8111e_suspend, 1949 .resume = amd8111e_resume 1950 }; 1951 1952 module_pci_driver(amd8111e_driver); 1953