xref: /linux/drivers/net/ethernet/amd/amd8111e.c (revision 2ba9268dd603d23e17643437b2246acb6844953b)
1 
2 /* Advanced  Micro Devices Inc. AMD8111E Linux Network Driver
3  * Copyright (C) 2004 Advanced Micro Devices
4  *
5  *
6  * Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ]
7  * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c]
8  * Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ]
9  * Derived from the lance driver written 1993,1994,1995 by Donald Becker.
10  * Copyright 1993 United States Government as represented by the
11  *	Director, National Security Agency.[ pcnet32.c ]
12  * Carsten Langgaard, carstenl@mips.com [ pcnet32.c ]
13  * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
14  *
15  *
16  * This program is free software; you can redistribute it and/or modify
17  * it under the terms of the GNU General Public License as published by
18  * the Free Software Foundation; either version 2 of the License, or
19  * (at your option) any later version.
20  *
21  * This program is distributed in the hope that it will be useful,
22  * but WITHOUT ANY WARRANTY; without even the implied warranty of
23  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
24  * GNU General Public License for more details.
25  *
26  * You should have received a copy of the GNU General Public License
27  * along with this program; if not, see <http://www.gnu.org/licenses/>.
28 
29 Module Name:
30 
31 	amd8111e.c
32 
33 Abstract:
34 
35  	 AMD8111 based 10/100 Ethernet Controller Driver.
36 
37 Environment:
38 
39 	Kernel Mode
40 
41 Revision History:
42  	3.0.0
43 	   Initial Revision.
44 	3.0.1
45 	 1. Dynamic interrupt coalescing.
46 	 2. Removed prev_stats.
47 	 3. MII support.
48 	 4. Dynamic IPG support
49 	3.0.2  05/29/2003
50 	 1. Bug fix: Fixed failure to send jumbo packets larger than 4k.
51 	 2. Bug fix: Fixed VLAN support failure.
52 	 3. Bug fix: Fixed receive interrupt coalescing bug.
53 	 4. Dynamic IPG support is disabled by default.
54 	3.0.3 06/05/2003
55 	 1. Bug fix: Fixed failure to close the interface if SMP is enabled.
56 	3.0.4 12/09/2003
57 	 1. Added set_mac_address routine for bonding driver support.
58 	 2. Tested the driver for bonding support
59 	 3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth
60 	    indicated to the h/w.
61 	 4. Modified amd8111e_rx() routine to receive all the received packets
62 	    in the first interrupt.
63 	 5. Bug fix: Corrected  rx_errors  reported in get_stats() function.
64 	3.0.5 03/22/2004
65 	 1. Added NAPI support
66 
67 */
68 
69 
70 #include <linux/module.h>
71 #include <linux/kernel.h>
72 #include <linux/types.h>
73 #include <linux/compiler.h>
74 #include <linux/delay.h>
75 #include <linux/interrupt.h>
76 #include <linux/ioport.h>
77 #include <linux/pci.h>
78 #include <linux/netdevice.h>
79 #include <linux/etherdevice.h>
80 #include <linux/skbuff.h>
81 #include <linux/ethtool.h>
82 #include <linux/mii.h>
83 #include <linux/if_vlan.h>
84 #include <linux/ctype.h>
85 #include <linux/crc32.h>
86 #include <linux/dma-mapping.h>
87 
88 #include <asm/io.h>
89 #include <asm/byteorder.h>
90 #include <asm/uaccess.h>
91 
92 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
93 #define AMD8111E_VLAN_TAG_USED 1
94 #else
95 #define AMD8111E_VLAN_TAG_USED 0
96 #endif
97 
98 #include "amd8111e.h"
99 #define MODULE_NAME	"amd8111e"
100 #define MODULE_VERS	"3.0.7"
101 MODULE_AUTHOR("Advanced Micro Devices, Inc.");
102 MODULE_DESCRIPTION ("AMD8111 based 10/100 Ethernet Controller. Driver Version "MODULE_VERS);
103 MODULE_LICENSE("GPL");
104 module_param_array(speed_duplex, int, NULL, 0);
105 MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotiate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex");
106 module_param_array(coalesce, bool, NULL, 0);
107 MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable");
108 module_param_array(dynamic_ipg, bool, NULL, 0);
109 MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable");
110 
111 /* This function will read the PHY registers. */
112 static int amd8111e_read_phy(struct amd8111e_priv *lp,
113 			     int phy_id, int reg, u32 *val)
114 {
115 	void __iomem *mmio = lp->mmio;
116 	unsigned int reg_val;
117 	unsigned int repeat= REPEAT_CNT;
118 
119 	reg_val = readl(mmio + PHY_ACCESS);
120 	while (reg_val & PHY_CMD_ACTIVE)
121 		reg_val = readl( mmio + PHY_ACCESS );
122 
123 	writel( PHY_RD_CMD | ((phy_id & 0x1f) << 21) |
124 			   ((reg & 0x1f) << 16),  mmio +PHY_ACCESS);
125 	do{
126 		reg_val = readl(mmio + PHY_ACCESS);
127 		udelay(30);  /* It takes 30 us to read/write data */
128 	} while (--repeat && (reg_val & PHY_CMD_ACTIVE));
129 	if(reg_val & PHY_RD_ERR)
130 		goto err_phy_read;
131 
132 	*val = reg_val & 0xffff;
133 	return 0;
134 err_phy_read:
135 	*val = 0;
136 	return -EINVAL;
137 
138 }
139 
140 /* This function will write into PHY registers. */
141 static int amd8111e_write_phy(struct amd8111e_priv *lp,
142 			      int phy_id, int reg, u32 val)
143 {
144 	unsigned int repeat = REPEAT_CNT;
145 	void __iomem *mmio = lp->mmio;
146 	unsigned int reg_val;
147 
148 	reg_val = readl(mmio + PHY_ACCESS);
149 	while (reg_val & PHY_CMD_ACTIVE)
150 		reg_val = readl( mmio + PHY_ACCESS );
151 
152 	writel( PHY_WR_CMD | ((phy_id & 0x1f) << 21) |
153 			   ((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS);
154 
155 	do{
156 		reg_val = readl(mmio + PHY_ACCESS);
157 		udelay(30);  /* It takes 30 us to read/write the data */
158 	} while (--repeat && (reg_val & PHY_CMD_ACTIVE));
159 
160 	if(reg_val & PHY_RD_ERR)
161 		goto err_phy_write;
162 
163 	return 0;
164 
165 err_phy_write:
166 	return -EINVAL;
167 
168 }
169 
170 /* This is the mii register read function provided to the mii interface. */
171 static int amd8111e_mdio_read(struct net_device *dev, int phy_id, int reg_num)
172 {
173 	struct amd8111e_priv *lp = netdev_priv(dev);
174 	unsigned int reg_val;
175 
176 	amd8111e_read_phy(lp,phy_id,reg_num,&reg_val);
177 	return reg_val;
178 
179 }
180 
181 /* This is the mii register write function provided to the mii interface. */
182 static void amd8111e_mdio_write(struct net_device *dev,
183 				int phy_id, int reg_num, int val)
184 {
185 	struct amd8111e_priv *lp = netdev_priv(dev);
186 
187 	amd8111e_write_phy(lp, phy_id, reg_num, val);
188 }
189 
190 /* This function will set PHY speed. During initialization sets
191  * the original speed to 100 full
192  */
193 static void amd8111e_set_ext_phy(struct net_device *dev)
194 {
195 	struct amd8111e_priv *lp = netdev_priv(dev);
196 	u32 bmcr,advert,tmp;
197 
198 	/* Determine mii register values to set the speed */
199 	advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE);
200 	tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
201 	switch (lp->ext_phy_option){
202 
203 		default:
204 		case SPEED_AUTONEG: /* advertise all values */
205 			tmp |= ( ADVERTISE_10HALF|ADVERTISE_10FULL|
206 				ADVERTISE_100HALF|ADVERTISE_100FULL) ;
207 			break;
208 		case SPEED10_HALF:
209 			tmp |= ADVERTISE_10HALF;
210 			break;
211 		case SPEED10_FULL:
212 			tmp |= ADVERTISE_10FULL;
213 			break;
214 		case SPEED100_HALF:
215 			tmp |= ADVERTISE_100HALF;
216 			break;
217 		case SPEED100_FULL:
218 			tmp |= ADVERTISE_100FULL;
219 			break;
220 	}
221 
222 	if(advert != tmp)
223 		amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp);
224 	/* Restart auto negotiation */
225 	bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR);
226 	bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
227 	amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr);
228 
229 }
230 
231 /* This function will unmap skb->data space and will free
232  * all transmit and receive skbuffs.
233  */
234 static int amd8111e_free_skbs(struct net_device *dev)
235 {
236 	struct amd8111e_priv *lp = netdev_priv(dev);
237 	struct sk_buff *rx_skbuff;
238 	int i;
239 
240 	/* Freeing transmit skbs */
241 	for(i = 0; i < NUM_TX_BUFFERS; i++){
242 		if(lp->tx_skbuff[i]){
243 			pci_unmap_single(lp->pci_dev,lp->tx_dma_addr[i],					lp->tx_skbuff[i]->len,PCI_DMA_TODEVICE);
244 			dev_kfree_skb (lp->tx_skbuff[i]);
245 			lp->tx_skbuff[i] = NULL;
246 			lp->tx_dma_addr[i] = 0;
247 		}
248 	}
249 	/* Freeing previously allocated receive buffers */
250 	for (i = 0; i < NUM_RX_BUFFERS; i++){
251 		rx_skbuff = lp->rx_skbuff[i];
252 		if(rx_skbuff != NULL){
253 			pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[i],
254 				  lp->rx_buff_len - 2,PCI_DMA_FROMDEVICE);
255 			dev_kfree_skb(lp->rx_skbuff[i]);
256 			lp->rx_skbuff[i] = NULL;
257 			lp->rx_dma_addr[i] = 0;
258 		}
259 	}
260 
261 	return 0;
262 }
263 
264 /* This will set the receive buffer length corresponding
265  * to the mtu size of networkinterface.
266  */
267 static inline void amd8111e_set_rx_buff_len(struct net_device *dev)
268 {
269 	struct amd8111e_priv *lp = netdev_priv(dev);
270 	unsigned int mtu = dev->mtu;
271 
272 	if (mtu > ETH_DATA_LEN){
273 		/* MTU + ethernet header + FCS
274 		 * + optional VLAN tag + skb reserve space 2
275 		 */
276 		lp->rx_buff_len = mtu + ETH_HLEN + 10;
277 		lp->options |= OPTION_JUMBO_ENABLE;
278 	} else{
279 		lp->rx_buff_len = PKT_BUFF_SZ;
280 		lp->options &= ~OPTION_JUMBO_ENABLE;
281 	}
282 }
283 
284 /* This function will free all the previously allocated buffers,
285  * determine new receive buffer length  and will allocate new receive buffers.
286  * This function also allocates and initializes both the transmitter
287  * and receive hardware descriptors.
288  */
289 static int amd8111e_init_ring(struct net_device *dev)
290 {
291 	struct amd8111e_priv *lp = netdev_priv(dev);
292 	int i;
293 
294 	lp->rx_idx = lp->tx_idx = 0;
295 	lp->tx_complete_idx = 0;
296 	lp->tx_ring_idx = 0;
297 
298 
299 	if(lp->opened)
300 		/* Free previously allocated transmit and receive skbs */
301 		amd8111e_free_skbs(dev);
302 
303 	else{
304 		 /* allocate the tx and rx descriptors */
305 	     	if((lp->tx_ring = pci_alloc_consistent(lp->pci_dev,
306 			sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
307 			&lp->tx_ring_dma_addr)) == NULL)
308 
309 			goto err_no_mem;
310 
311 	     	if((lp->rx_ring = pci_alloc_consistent(lp->pci_dev,
312 			sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
313 			&lp->rx_ring_dma_addr)) == NULL)
314 
315 			goto err_free_tx_ring;
316 
317 	}
318 	/* Set new receive buff size */
319 	amd8111e_set_rx_buff_len(dev);
320 
321 	/* Allocating receive  skbs */
322 	for (i = 0; i < NUM_RX_BUFFERS; i++) {
323 
324 		lp->rx_skbuff[i] = netdev_alloc_skb(dev, lp->rx_buff_len);
325 		if (!lp->rx_skbuff[i]) {
326 				/* Release previos allocated skbs */
327 				for(--i; i >= 0 ;i--)
328 					dev_kfree_skb(lp->rx_skbuff[i]);
329 				goto err_free_rx_ring;
330 		}
331 		skb_reserve(lp->rx_skbuff[i],2);
332 	}
333         /* Initilaizing receive descriptors */
334 	for (i = 0; i < NUM_RX_BUFFERS; i++) {
335 		lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev,
336 			lp->rx_skbuff[i]->data,lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
337 
338 		lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]);
339 		lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2);
340 		wmb();
341 		lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT);
342 	}
343 
344 	/* Initializing transmit descriptors */
345 	for (i = 0; i < NUM_TX_RING_DR; i++) {
346 		lp->tx_ring[i].buff_phy_addr = 0;
347 		lp->tx_ring[i].tx_flags = 0;
348 		lp->tx_ring[i].buff_count = 0;
349 	}
350 
351 	return 0;
352 
353 err_free_rx_ring:
354 
355 	pci_free_consistent(lp->pci_dev,
356 		sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,lp->rx_ring,
357 		lp->rx_ring_dma_addr);
358 
359 err_free_tx_ring:
360 
361 	pci_free_consistent(lp->pci_dev,
362 		 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,lp->tx_ring,
363 		 lp->tx_ring_dma_addr);
364 
365 err_no_mem:
366 	return -ENOMEM;
367 }
368 
369 /* This function will set the interrupt coalescing according
370  * to the input arguments
371  */
372 static int amd8111e_set_coalesce(struct net_device *dev, enum coal_mode cmod)
373 {
374 	unsigned int timeout;
375 	unsigned int event_count;
376 
377 	struct amd8111e_priv *lp = netdev_priv(dev);
378 	void __iomem *mmio = lp->mmio;
379 	struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf;
380 
381 
382 	switch(cmod)
383 	{
384 		case RX_INTR_COAL :
385 			timeout = coal_conf->rx_timeout;
386 			event_count = coal_conf->rx_event_count;
387 			if( timeout > MAX_TIMEOUT ||
388 					event_count > MAX_EVENT_COUNT )
389 				return -EINVAL;
390 
391 			timeout = timeout * DELAY_TIMER_CONV;
392 			writel(VAL0|STINTEN, mmio+INTEN0);
393 			writel((u32)DLY_INT_A_R0|( event_count<< 16 )|timeout,
394 							mmio+DLY_INT_A);
395 			break;
396 
397 		case TX_INTR_COAL :
398 			timeout = coal_conf->tx_timeout;
399 			event_count = coal_conf->tx_event_count;
400 			if( timeout > MAX_TIMEOUT ||
401 					event_count > MAX_EVENT_COUNT )
402 				return -EINVAL;
403 
404 
405 			timeout = timeout * DELAY_TIMER_CONV;
406 			writel(VAL0|STINTEN,mmio+INTEN0);
407 			writel((u32)DLY_INT_B_T0|( event_count<< 16 )|timeout,
408 							 mmio+DLY_INT_B);
409 			break;
410 
411 		case DISABLE_COAL:
412 			writel(0,mmio+STVAL);
413 			writel(STINTEN, mmio+INTEN0);
414 			writel(0, mmio +DLY_INT_B);
415 			writel(0, mmio+DLY_INT_A);
416 			break;
417 		 case ENABLE_COAL:
418 		       /* Start the timer */
419 			writel((u32)SOFT_TIMER_FREQ, mmio+STVAL); /*  0.5 sec */
420 			writel(VAL0|STINTEN, mmio+INTEN0);
421 			break;
422 		default:
423 			break;
424 
425    }
426 	return 0;
427 
428 }
429 
430 /* This function initializes the device registers  and starts the device. */
431 static int amd8111e_restart(struct net_device *dev)
432 {
433 	struct amd8111e_priv *lp = netdev_priv(dev);
434 	void __iomem *mmio = lp->mmio;
435 	int i,reg_val;
436 
437 	/* stop the chip */
438 	 writel(RUN, mmio + CMD0);
439 
440 	if(amd8111e_init_ring(dev))
441 		return -ENOMEM;
442 
443 	/* enable the port manager and set auto negotiation always */
444 	writel((u32) VAL1|EN_PMGR, mmio + CMD3 );
445 	writel((u32)XPHYANE|XPHYRST , mmio + CTRL2);
446 
447 	amd8111e_set_ext_phy(dev);
448 
449 	/* set control registers */
450 	reg_val = readl(mmio + CTRL1);
451 	reg_val &= ~XMTSP_MASK;
452 	writel( reg_val| XMTSP_128 | CACHE_ALIGN, mmio + CTRL1 );
453 
454 	/* enable interrupt */
455 	writel( APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN |
456 		APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN |
457 		SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0);
458 
459 	writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0);
460 
461 	/* initialize tx and rx ring base addresses */
462 	writel((u32)lp->tx_ring_dma_addr,mmio + XMT_RING_BASE_ADDR0);
463 	writel((u32)lp->rx_ring_dma_addr,mmio+ RCV_RING_BASE_ADDR0);
464 
465 	writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0);
466 	writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0);
467 
468 	/* set default IPG to 96 */
469 	writew((u32)DEFAULT_IPG,mmio+IPG);
470 	writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1);
471 
472 	if(lp->options & OPTION_JUMBO_ENABLE){
473 		writel((u32)VAL2|JUMBO, mmio + CMD3);
474 		/* Reset REX_UFLO */
475 		writel( REX_UFLO, mmio + CMD2);
476 		/* Should not set REX_UFLO for jumbo frames */
477 		writel( VAL0 | APAD_XMT|REX_RTRY , mmio + CMD2);
478 	}else{
479 		writel( VAL0 | APAD_XMT | REX_RTRY|REX_UFLO, mmio + CMD2);
480 		writel((u32)JUMBO, mmio + CMD3);
481 	}
482 
483 #if AMD8111E_VLAN_TAG_USED
484 	writel((u32) VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3);
485 #endif
486 	writel( VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2 );
487 
488 	/* Setting the MAC address to the device */
489 	for (i = 0; i < ETH_ALEN; i++)
490 		writeb( dev->dev_addr[i], mmio + PADR + i );
491 
492 	/* Enable interrupt coalesce */
493 	if(lp->options & OPTION_INTR_COAL_ENABLE){
494 		netdev_info(dev, "Interrupt Coalescing Enabled.\n");
495 		amd8111e_set_coalesce(dev,ENABLE_COAL);
496 	}
497 
498 	/* set RUN bit to start the chip */
499 	writel(VAL2 | RDMD0, mmio + CMD0);
500 	writel(VAL0 | INTREN | RUN, mmio + CMD0);
501 
502 	/* To avoid PCI posting bug */
503 	readl(mmio+CMD0);
504 	return 0;
505 }
506 
507 /* This function clears necessary the device registers. */
508 static void amd8111e_init_hw_default(struct amd8111e_priv *lp)
509 {
510 	unsigned int reg_val;
511 	unsigned int logic_filter[2] ={0,};
512 	void __iomem *mmio = lp->mmio;
513 
514 
515         /* stop the chip */
516 	writel(RUN, mmio + CMD0);
517 
518 	/* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */
519 	writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0);
520 
521 	/* Clear RCV_RING_BASE_ADDR */
522 	writel(0, mmio + RCV_RING_BASE_ADDR0);
523 
524 	/* Clear XMT_RING_BASE_ADDR */
525 	writel(0, mmio + XMT_RING_BASE_ADDR0);
526 	writel(0, mmio + XMT_RING_BASE_ADDR1);
527 	writel(0, mmio + XMT_RING_BASE_ADDR2);
528 	writel(0, mmio + XMT_RING_BASE_ADDR3);
529 
530 	/* Clear CMD0  */
531 	writel(CMD0_CLEAR,mmio + CMD0);
532 
533 	/* Clear CMD2 */
534 	writel(CMD2_CLEAR, mmio +CMD2);
535 
536 	/* Clear CMD7 */
537 	writel(CMD7_CLEAR , mmio + CMD7);
538 
539 	/* Clear DLY_INT_A and DLY_INT_B */
540 	writel(0x0, mmio + DLY_INT_A);
541 	writel(0x0, mmio + DLY_INT_B);
542 
543 	/* Clear FLOW_CONTROL */
544 	writel(0x0, mmio + FLOW_CONTROL);
545 
546 	/* Clear INT0  write 1 to clear register */
547 	reg_val = readl(mmio + INT0);
548 	writel(reg_val, mmio + INT0);
549 
550 	/* Clear STVAL */
551 	writel(0x0, mmio + STVAL);
552 
553 	/* Clear INTEN0 */
554 	writel( INTEN0_CLEAR, mmio + INTEN0);
555 
556 	/* Clear LADRF */
557 	writel(0x0 , mmio + LADRF);
558 
559 	/* Set SRAM_SIZE & SRAM_BOUNDARY registers  */
560 	writel( 0x80010,mmio + SRAM_SIZE);
561 
562 	/* Clear RCV_RING0_LEN */
563 	writel(0x0, mmio +  RCV_RING_LEN0);
564 
565 	/* Clear XMT_RING0/1/2/3_LEN */
566 	writel(0x0, mmio +  XMT_RING_LEN0);
567 	writel(0x0, mmio +  XMT_RING_LEN1);
568 	writel(0x0, mmio +  XMT_RING_LEN2);
569 	writel(0x0, mmio +  XMT_RING_LEN3);
570 
571 	/* Clear XMT_RING_LIMIT */
572 	writel(0x0, mmio + XMT_RING_LIMIT);
573 
574 	/* Clear MIB */
575 	writew(MIB_CLEAR, mmio + MIB_ADDR);
576 
577 	/* Clear LARF */
578 	amd8111e_writeq(*(u64 *)logic_filter, mmio + LADRF);
579 
580 	/* SRAM_SIZE register */
581 	reg_val = readl(mmio + SRAM_SIZE);
582 
583 	if(lp->options & OPTION_JUMBO_ENABLE)
584 		writel( VAL2|JUMBO, mmio + CMD3);
585 #if AMD8111E_VLAN_TAG_USED
586 	writel(VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3 );
587 #endif
588 	/* Set default value to CTRL1 Register */
589 	writel(CTRL1_DEFAULT, mmio + CTRL1);
590 
591 	/* To avoid PCI posting bug */
592 	readl(mmio + CMD2);
593 
594 }
595 
596 /* This function disables the interrupt and clears all the pending
597  * interrupts in INT0
598  */
599 static void amd8111e_disable_interrupt(struct amd8111e_priv *lp)
600 {
601 	u32 intr0;
602 
603 	/* Disable interrupt */
604 	writel(INTREN, lp->mmio + CMD0);
605 
606 	/* Clear INT0 */
607 	intr0 = readl(lp->mmio + INT0);
608 	writel(intr0, lp->mmio + INT0);
609 
610 	/* To avoid PCI posting bug */
611 	readl(lp->mmio + INT0);
612 
613 }
614 
615 /* This function stops the chip. */
616 static void amd8111e_stop_chip(struct amd8111e_priv *lp)
617 {
618 	writel(RUN, lp->mmio + CMD0);
619 
620 	/* To avoid PCI posting bug */
621 	readl(lp->mmio + CMD0);
622 }
623 
624 /* This function frees the  transmiter and receiver descriptor rings. */
625 static void amd8111e_free_ring(struct amd8111e_priv *lp)
626 {
627 	/* Free transmit and receive descriptor rings */
628 	if(lp->rx_ring){
629 		pci_free_consistent(lp->pci_dev,
630 			sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
631 			lp->rx_ring, lp->rx_ring_dma_addr);
632 		lp->rx_ring = NULL;
633 	}
634 
635 	if(lp->tx_ring){
636 		pci_free_consistent(lp->pci_dev,
637 			sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
638 			lp->tx_ring, lp->tx_ring_dma_addr);
639 
640 		lp->tx_ring = NULL;
641 	}
642 
643 }
644 
645 /* This function will free all the transmit skbs that are actually
646  * transmitted by the device. It will check the ownership of the
647  * skb before freeing the skb.
648  */
649 static int amd8111e_tx(struct net_device *dev)
650 {
651 	struct amd8111e_priv *lp = netdev_priv(dev);
652 	int tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
653 	int status;
654 	/* Complete all the transmit packet */
655 	while (lp->tx_complete_idx != lp->tx_idx){
656 		tx_index =  lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
657 		status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags);
658 
659 		if(status & OWN_BIT)
660 			break;	/* It still hasn't been Txed */
661 
662 		lp->tx_ring[tx_index].buff_phy_addr = 0;
663 
664 		/* We must free the original skb */
665 		if (lp->tx_skbuff[tx_index]) {
666 			pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[tx_index],
667 				  	lp->tx_skbuff[tx_index]->len,
668 					PCI_DMA_TODEVICE);
669 			dev_kfree_skb_irq (lp->tx_skbuff[tx_index]);
670 			lp->tx_skbuff[tx_index] = NULL;
671 			lp->tx_dma_addr[tx_index] = 0;
672 		}
673 		lp->tx_complete_idx++;
674 		/*COAL update tx coalescing parameters */
675 		lp->coal_conf.tx_packets++;
676 		lp->coal_conf.tx_bytes +=
677 			le16_to_cpu(lp->tx_ring[tx_index].buff_count);
678 
679 		if (netif_queue_stopped(dev) &&
680 			lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS +2){
681 			/* The ring is no longer full, clear tbusy. */
682 			/* lp->tx_full = 0; */
683 			netif_wake_queue (dev);
684 		}
685 	}
686 	return 0;
687 }
688 
689 /* This function handles the driver receive operation in polling mode */
690 static int amd8111e_rx_poll(struct napi_struct *napi, int budget)
691 {
692 	struct amd8111e_priv *lp = container_of(napi, struct amd8111e_priv, napi);
693 	struct net_device *dev = lp->amd8111e_net_dev;
694 	int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK;
695 	void __iomem *mmio = lp->mmio;
696 	struct sk_buff *skb,*new_skb;
697 	int min_pkt_len, status;
698 	unsigned int intr0;
699 	int num_rx_pkt = 0;
700 	short pkt_len;
701 #if AMD8111E_VLAN_TAG_USED
702 	short vtag;
703 #endif
704 	int rx_pkt_limit = budget;
705 	unsigned long flags;
706 
707 	if (rx_pkt_limit <= 0)
708 		goto rx_not_empty;
709 
710 	do{
711 		/* process receive packets until we use the quota.
712 		 * If we own the next entry, it's a new packet. Send it up.
713 		 */
714 		while(1) {
715 			status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags);
716 			if (status & OWN_BIT)
717 				break;
718 
719 			/* There is a tricky error noted by John Murphy,
720 			 * <murf@perftech.com> to Russ Nelson: Even with
721 			 * full-sized * buffers it's possible for a
722 			 * jabber packet to use two buffers, with only
723 			 * the last correctly noting the error.
724 			 */
725 			if(status & ERR_BIT) {
726 				/* reseting flags */
727 				lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
728 				goto err_next_pkt;
729 			}
730 			/* check for STP and ENP */
731 			if(!((status & STP_BIT) && (status & ENP_BIT))){
732 				/* reseting flags */
733 				lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
734 				goto err_next_pkt;
735 			}
736 			pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4;
737 
738 #if AMD8111E_VLAN_TAG_USED
739 			vtag = status & TT_MASK;
740 			/*MAC will strip vlan tag*/
741 			if (vtag != 0)
742 				min_pkt_len =MIN_PKT_LEN - 4;
743 			else
744 #endif
745 				min_pkt_len =MIN_PKT_LEN;
746 
747 			if (pkt_len < min_pkt_len) {
748 				lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
749 				lp->drv_rx_errors++;
750 				goto err_next_pkt;
751 			}
752 			if(--rx_pkt_limit < 0)
753 				goto rx_not_empty;
754 			new_skb = netdev_alloc_skb(dev, lp->rx_buff_len);
755 			if (!new_skb) {
756 				/* if allocation fail,
757 				 * ignore that pkt and go to next one
758 				 */
759 				lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
760 				lp->drv_rx_errors++;
761 				goto err_next_pkt;
762 			}
763 
764 			skb_reserve(new_skb, 2);
765 			skb = lp->rx_skbuff[rx_index];
766 			pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[rx_index],
767 					 lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
768 			skb_put(skb, pkt_len);
769 			lp->rx_skbuff[rx_index] = new_skb;
770 			lp->rx_dma_addr[rx_index] = pci_map_single(lp->pci_dev,
771 								   new_skb->data,
772 								   lp->rx_buff_len-2,
773 								   PCI_DMA_FROMDEVICE);
774 
775 			skb->protocol = eth_type_trans(skb, dev);
776 
777 #if AMD8111E_VLAN_TAG_USED
778 			if (vtag == TT_VLAN_TAGGED){
779 				u16 vlan_tag = le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info);
780 				__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
781 			}
782 #endif
783 			netif_receive_skb(skb);
784 			/*COAL update rx coalescing parameters*/
785 			lp->coal_conf.rx_packets++;
786 			lp->coal_conf.rx_bytes += pkt_len;
787 			num_rx_pkt++;
788 
789 		err_next_pkt:
790 			lp->rx_ring[rx_index].buff_phy_addr
791 				= cpu_to_le32(lp->rx_dma_addr[rx_index]);
792 			lp->rx_ring[rx_index].buff_count =
793 				cpu_to_le16(lp->rx_buff_len-2);
794 			wmb();
795 			lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT);
796 			rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK;
797 		}
798 		/* Check the interrupt status register for more packets in the
799 		 * mean time. Process them since we have not used up our quota.
800 		 */
801 		intr0 = readl(mmio + INT0);
802 		/*Ack receive packets */
803 		writel(intr0 & RINT0,mmio + INT0);
804 
805 	} while(intr0 & RINT0);
806 
807 	if (rx_pkt_limit > 0) {
808 		/* Receive descriptor is empty now */
809 		spin_lock_irqsave(&lp->lock, flags);
810 		__napi_complete(napi);
811 		writel(VAL0|RINTEN0, mmio + INTEN0);
812 		writel(VAL2 | RDMD0, mmio + CMD0);
813 		spin_unlock_irqrestore(&lp->lock, flags);
814 	}
815 
816 rx_not_empty:
817 	return num_rx_pkt;
818 }
819 
820 /* This function will indicate the link status to the kernel. */
821 static int amd8111e_link_change(struct net_device *dev)
822 {
823 	struct amd8111e_priv *lp = netdev_priv(dev);
824 	int status0,speed;
825 
826 	/* read the link change */
827      	status0 = readl(lp->mmio + STAT0);
828 
829 	if(status0 & LINK_STATS){
830 		if(status0 & AUTONEG_COMPLETE)
831 			lp->link_config.autoneg = AUTONEG_ENABLE;
832 		else
833 			lp->link_config.autoneg = AUTONEG_DISABLE;
834 
835 		if(status0 & FULL_DPLX)
836 			lp->link_config.duplex = DUPLEX_FULL;
837 		else
838 			lp->link_config.duplex = DUPLEX_HALF;
839 		speed = (status0 & SPEED_MASK) >> 7;
840 		if(speed == PHY_SPEED_10)
841 			lp->link_config.speed = SPEED_10;
842 		else if(speed == PHY_SPEED_100)
843 			lp->link_config.speed = SPEED_100;
844 
845 		netdev_info(dev, "Link is Up. Speed is %s Mbps %s Duplex\n",
846 			    (lp->link_config.speed == SPEED_100) ?
847 							"100" : "10",
848 			    (lp->link_config.duplex == DUPLEX_FULL) ?
849 							"Full" : "Half");
850 
851 		netif_carrier_on(dev);
852 	}
853 	else{
854 		lp->link_config.speed = SPEED_INVALID;
855 		lp->link_config.duplex = DUPLEX_INVALID;
856 		lp->link_config.autoneg = AUTONEG_INVALID;
857 		netdev_info(dev, "Link is Down.\n");
858 		netif_carrier_off(dev);
859 	}
860 
861 	return 0;
862 }
863 
864 /* This function reads the mib counters. */
865 static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER)
866 {
867 	unsigned int  status;
868 	unsigned  int data;
869 	unsigned int repeat = REPEAT_CNT;
870 
871 	writew( MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR);
872 	do {
873 		status = readw(mmio + MIB_ADDR);
874 		udelay(2);	/* controller takes MAX 2 us to get mib data */
875 	}
876 	while (--repeat && (status & MIB_CMD_ACTIVE));
877 
878 	data = readl(mmio + MIB_DATA);
879 	return data;
880 }
881 
882 /* This function reads the mib registers and returns the hardware statistics.
883  * It updates previous internal driver statistics with new values.
884  */
885 static struct net_device_stats *amd8111e_get_stats(struct net_device *dev)
886 {
887 	struct amd8111e_priv *lp = netdev_priv(dev);
888 	void __iomem *mmio = lp->mmio;
889 	unsigned long flags;
890 	struct net_device_stats *new_stats = &dev->stats;
891 
892 	if (!lp->opened)
893 		return new_stats;
894 	spin_lock_irqsave (&lp->lock, flags);
895 
896 	/* stats.rx_packets */
897 	new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+
898 				amd8111e_read_mib(mmio, rcv_multicast_pkts)+
899 				amd8111e_read_mib(mmio, rcv_unicast_pkts);
900 
901 	/* stats.tx_packets */
902 	new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets);
903 
904 	/*stats.rx_bytes */
905 	new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets);
906 
907 	/* stats.tx_bytes */
908 	new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets);
909 
910 	/* stats.rx_errors */
911 	/* hw errors + errors driver reported */
912 	new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+
913 				amd8111e_read_mib(mmio, rcv_fragments)+
914 				amd8111e_read_mib(mmio, rcv_jabbers)+
915 				amd8111e_read_mib(mmio, rcv_alignment_errors)+
916 				amd8111e_read_mib(mmio, rcv_fcs_errors)+
917 				amd8111e_read_mib(mmio, rcv_miss_pkts)+
918 				lp->drv_rx_errors;
919 
920 	/* stats.tx_errors */
921 	new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
922 
923 	/* stats.rx_dropped*/
924 	new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts);
925 
926 	/* stats.tx_dropped*/
927 	new_stats->tx_dropped = amd8111e_read_mib(mmio,  xmt_underrun_pkts);
928 
929 	/* stats.multicast*/
930 	new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts);
931 
932 	/* stats.collisions*/
933 	new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions);
934 
935 	/* stats.rx_length_errors*/
936 	new_stats->rx_length_errors =
937 		amd8111e_read_mib(mmio, rcv_undersize_pkts)+
938 		amd8111e_read_mib(mmio, rcv_oversize_pkts);
939 
940 	/* stats.rx_over_errors*/
941 	new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
942 
943 	/* stats.rx_crc_errors*/
944 	new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors);
945 
946 	/* stats.rx_frame_errors*/
947 	new_stats->rx_frame_errors =
948 		amd8111e_read_mib(mmio, rcv_alignment_errors);
949 
950 	/* stats.rx_fifo_errors */
951 	new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
952 
953 	/* stats.rx_missed_errors */
954 	new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
955 
956 	/* stats.tx_aborted_errors*/
957 	new_stats->tx_aborted_errors =
958 		amd8111e_read_mib(mmio, xmt_excessive_collision);
959 
960 	/* stats.tx_carrier_errors*/
961 	new_stats->tx_carrier_errors =
962 		amd8111e_read_mib(mmio, xmt_loss_carrier);
963 
964 	/* stats.tx_fifo_errors*/
965 	new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
966 
967 	/* stats.tx_window_errors*/
968 	new_stats->tx_window_errors =
969 		amd8111e_read_mib(mmio, xmt_late_collision);
970 
971 	/* Reset the mibs for collecting new statistics */
972 	/* writew(MIB_CLEAR, mmio + MIB_ADDR);*/
973 
974 	spin_unlock_irqrestore (&lp->lock, flags);
975 
976 	return new_stats;
977 }
978 
979 /* This function recalculate the interrupt coalescing  mode on every interrupt
980  * according to the datarate and the packet rate.
981  */
982 static int amd8111e_calc_coalesce(struct net_device *dev)
983 {
984 	struct amd8111e_priv *lp = netdev_priv(dev);
985 	struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf;
986 	int tx_pkt_rate;
987 	int rx_pkt_rate;
988 	int tx_data_rate;
989 	int rx_data_rate;
990 	int rx_pkt_size;
991 	int tx_pkt_size;
992 
993 	tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets;
994 	coal_conf->tx_prev_packets =  coal_conf->tx_packets;
995 
996 	tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes;
997 	coal_conf->tx_prev_bytes =  coal_conf->tx_bytes;
998 
999 	rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets;
1000 	coal_conf->rx_prev_packets =  coal_conf->rx_packets;
1001 
1002 	rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes;
1003 	coal_conf->rx_prev_bytes =  coal_conf->rx_bytes;
1004 
1005 	if(rx_pkt_rate < 800){
1006 		if(coal_conf->rx_coal_type != NO_COALESCE){
1007 
1008 			coal_conf->rx_timeout = 0x0;
1009 			coal_conf->rx_event_count = 0;
1010 			amd8111e_set_coalesce(dev,RX_INTR_COAL);
1011 			coal_conf->rx_coal_type = NO_COALESCE;
1012 		}
1013 	}
1014 	else{
1015 
1016 		rx_pkt_size = rx_data_rate/rx_pkt_rate;
1017 		if (rx_pkt_size < 128){
1018 			if(coal_conf->rx_coal_type != NO_COALESCE){
1019 
1020 				coal_conf->rx_timeout = 0;
1021 				coal_conf->rx_event_count = 0;
1022 				amd8111e_set_coalesce(dev,RX_INTR_COAL);
1023 				coal_conf->rx_coal_type = NO_COALESCE;
1024 			}
1025 
1026 		}
1027 		else if ( (rx_pkt_size >= 128) && (rx_pkt_size < 512) ){
1028 
1029 			if(coal_conf->rx_coal_type !=  LOW_COALESCE){
1030 				coal_conf->rx_timeout = 1;
1031 				coal_conf->rx_event_count = 4;
1032 				amd8111e_set_coalesce(dev,RX_INTR_COAL);
1033 				coal_conf->rx_coal_type = LOW_COALESCE;
1034 			}
1035 		}
1036 		else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)){
1037 
1038 			if(coal_conf->rx_coal_type !=  MEDIUM_COALESCE){
1039 				coal_conf->rx_timeout = 1;
1040 				coal_conf->rx_event_count = 4;
1041 				amd8111e_set_coalesce(dev,RX_INTR_COAL);
1042 				coal_conf->rx_coal_type = MEDIUM_COALESCE;
1043 			}
1044 
1045 		}
1046 		else if(rx_pkt_size >= 1024){
1047 			if(coal_conf->rx_coal_type !=  HIGH_COALESCE){
1048 				coal_conf->rx_timeout = 2;
1049 				coal_conf->rx_event_count = 3;
1050 				amd8111e_set_coalesce(dev,RX_INTR_COAL);
1051 				coal_conf->rx_coal_type = HIGH_COALESCE;
1052 			}
1053 		}
1054 	}
1055     	/* NOW FOR TX INTR COALESC */
1056 	if(tx_pkt_rate < 800){
1057 		if(coal_conf->tx_coal_type != NO_COALESCE){
1058 
1059 			coal_conf->tx_timeout = 0x0;
1060 			coal_conf->tx_event_count = 0;
1061 			amd8111e_set_coalesce(dev,TX_INTR_COAL);
1062 			coal_conf->tx_coal_type = NO_COALESCE;
1063 		}
1064 	}
1065 	else{
1066 
1067 		tx_pkt_size = tx_data_rate/tx_pkt_rate;
1068 		if (tx_pkt_size < 128){
1069 
1070 			if(coal_conf->tx_coal_type != NO_COALESCE){
1071 
1072 				coal_conf->tx_timeout = 0;
1073 				coal_conf->tx_event_count = 0;
1074 				amd8111e_set_coalesce(dev,TX_INTR_COAL);
1075 				coal_conf->tx_coal_type = NO_COALESCE;
1076 			}
1077 
1078 		}
1079 		else if ( (tx_pkt_size >= 128) && (tx_pkt_size < 512) ){
1080 
1081 			if(coal_conf->tx_coal_type !=  LOW_COALESCE){
1082 				coal_conf->tx_timeout = 1;
1083 				coal_conf->tx_event_count = 2;
1084 				amd8111e_set_coalesce(dev,TX_INTR_COAL);
1085 				coal_conf->tx_coal_type = LOW_COALESCE;
1086 
1087 			}
1088 		}
1089 		else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)){
1090 
1091 			if(coal_conf->tx_coal_type !=  MEDIUM_COALESCE){
1092 				coal_conf->tx_timeout = 2;
1093 				coal_conf->tx_event_count = 5;
1094 				amd8111e_set_coalesce(dev,TX_INTR_COAL);
1095 				coal_conf->tx_coal_type = MEDIUM_COALESCE;
1096 			}
1097 
1098 		}
1099 		else if(tx_pkt_size >= 1024){
1100 			if (tx_pkt_size >= 1024){
1101 				if(coal_conf->tx_coal_type !=  HIGH_COALESCE){
1102 					coal_conf->tx_timeout = 4;
1103 					coal_conf->tx_event_count = 8;
1104 					amd8111e_set_coalesce(dev,TX_INTR_COAL);
1105 					coal_conf->tx_coal_type = HIGH_COALESCE;
1106 				}
1107 			}
1108 		}
1109 	}
1110 	return 0;
1111 
1112 }
1113 
1114 /* This is device interrupt function. It handles transmit,
1115  * receive,link change and hardware timer interrupts.
1116  */
1117 static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
1118 {
1119 
1120 	struct net_device *dev = (struct net_device *)dev_id;
1121 	struct amd8111e_priv *lp = netdev_priv(dev);
1122 	void __iomem *mmio = lp->mmio;
1123 	unsigned int intr0, intren0;
1124 	unsigned int handled = 1;
1125 
1126 	if(unlikely(dev == NULL))
1127 		return IRQ_NONE;
1128 
1129 	spin_lock(&lp->lock);
1130 
1131 	/* disabling interrupt */
1132 	writel(INTREN, mmio + CMD0);
1133 
1134 	/* Read interrupt status */
1135 	intr0 = readl(mmio + INT0);
1136 	intren0 = readl(mmio + INTEN0);
1137 
1138 	/* Process all the INT event until INTR bit is clear. */
1139 
1140 	if (!(intr0 & INTR)){
1141 		handled = 0;
1142 		goto err_no_interrupt;
1143 	}
1144 
1145 	/* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */
1146 	writel(intr0, mmio + INT0);
1147 
1148 	/* Check if Receive Interrupt has occurred. */
1149 	if (intr0 & RINT0) {
1150 		if (napi_schedule_prep(&lp->napi)) {
1151 			/* Disable receive interupts */
1152 			writel(RINTEN0, mmio + INTEN0);
1153 			/* Schedule a polling routine */
1154 			__napi_schedule(&lp->napi);
1155 		} else if (intren0 & RINTEN0) {
1156 			netdev_dbg(dev, "************Driver bug! interrupt while in poll\n");
1157 			/* Fix by disable receive interrupts */
1158 			writel(RINTEN0, mmio + INTEN0);
1159 		}
1160 	}
1161 
1162 	/* Check if  Transmit Interrupt has occurred. */
1163 	if (intr0 & TINT0)
1164 		amd8111e_tx(dev);
1165 
1166 	/* Check if  Link Change Interrupt has occurred. */
1167 	if (intr0 & LCINT)
1168 		amd8111e_link_change(dev);
1169 
1170 	/* Check if Hardware Timer Interrupt has occurred. */
1171 	if (intr0 & STINT)
1172 		amd8111e_calc_coalesce(dev);
1173 
1174 err_no_interrupt:
1175 	writel( VAL0 | INTREN,mmio + CMD0);
1176 
1177 	spin_unlock(&lp->lock);
1178 
1179 	return IRQ_RETVAL(handled);
1180 }
1181 
1182 #ifdef CONFIG_NET_POLL_CONTROLLER
1183 static void amd8111e_poll(struct net_device *dev)
1184 {
1185 	unsigned long flags;
1186 	local_irq_save(flags);
1187 	amd8111e_interrupt(0, dev);
1188 	local_irq_restore(flags);
1189 }
1190 #endif
1191 
1192 
1193 /* This function closes the network interface and updates
1194  * the statistics so that most recent statistics will be
1195  * available after the interface is down.
1196  */
1197 static int amd8111e_close(struct net_device *dev)
1198 {
1199 	struct amd8111e_priv *lp = netdev_priv(dev);
1200 	netif_stop_queue(dev);
1201 
1202 	napi_disable(&lp->napi);
1203 
1204 	spin_lock_irq(&lp->lock);
1205 
1206 	amd8111e_disable_interrupt(lp);
1207 	amd8111e_stop_chip(lp);
1208 
1209 	/* Free transmit and receive skbs */
1210 	amd8111e_free_skbs(lp->amd8111e_net_dev);
1211 
1212 	netif_carrier_off(lp->amd8111e_net_dev);
1213 
1214 	/* Delete ipg timer */
1215 	if(lp->options & OPTION_DYN_IPG_ENABLE)
1216 		del_timer_sync(&lp->ipg_data.ipg_timer);
1217 
1218 	spin_unlock_irq(&lp->lock);
1219 	free_irq(dev->irq, dev);
1220 	amd8111e_free_ring(lp);
1221 
1222 	/* Update the statistics before closing */
1223 	amd8111e_get_stats(dev);
1224 	lp->opened = 0;
1225 	return 0;
1226 }
1227 
1228 /* This function opens new interface.It requests irq for the device,
1229  * initializes the device,buffers and descriptors, and starts the device.
1230  */
1231 static int amd8111e_open(struct net_device *dev)
1232 {
1233 	struct amd8111e_priv *lp = netdev_priv(dev);
1234 
1235 	if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED,
1236 					 dev->name, dev))
1237 		return -EAGAIN;
1238 
1239 	napi_enable(&lp->napi);
1240 
1241 	spin_lock_irq(&lp->lock);
1242 
1243 	amd8111e_init_hw_default(lp);
1244 
1245 	if(amd8111e_restart(dev)){
1246 		spin_unlock_irq(&lp->lock);
1247 		napi_disable(&lp->napi);
1248 		if (dev->irq)
1249 			free_irq(dev->irq, dev);
1250 		return -ENOMEM;
1251 	}
1252 	/* Start ipg timer */
1253 	if(lp->options & OPTION_DYN_IPG_ENABLE){
1254 		add_timer(&lp->ipg_data.ipg_timer);
1255 		netdev_info(dev, "Dynamic IPG Enabled\n");
1256 	}
1257 
1258 	lp->opened = 1;
1259 
1260 	spin_unlock_irq(&lp->lock);
1261 
1262 	netif_start_queue(dev);
1263 
1264 	return 0;
1265 }
1266 
1267 /* This function checks if there is any transmit  descriptors
1268  * available to queue more packet.
1269  */
1270 static int amd8111e_tx_queue_avail(struct amd8111e_priv *lp)
1271 {
1272 	int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK;
1273 	if (lp->tx_skbuff[tx_index])
1274 		return -1;
1275 	else
1276 		return 0;
1277 
1278 }
1279 
1280 /* This function will queue the transmit packets to the
1281  * descriptors and will trigger the send operation. It also
1282  * initializes the transmit descriptors with buffer physical address,
1283  * byte count, ownership to hardware etc.
1284  */
1285 static netdev_tx_t amd8111e_start_xmit(struct sk_buff *skb,
1286 				       struct net_device *dev)
1287 {
1288 	struct amd8111e_priv *lp = netdev_priv(dev);
1289 	int tx_index;
1290 	unsigned long flags;
1291 
1292 	spin_lock_irqsave(&lp->lock, flags);
1293 
1294 	tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK;
1295 
1296 	lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len);
1297 
1298 	lp->tx_skbuff[tx_index] = skb;
1299 	lp->tx_ring[tx_index].tx_flags = 0;
1300 
1301 #if AMD8111E_VLAN_TAG_USED
1302 	if (skb_vlan_tag_present(skb)) {
1303 		lp->tx_ring[tx_index].tag_ctrl_cmd |=
1304 				cpu_to_le16(TCC_VLAN_INSERT);
1305 		lp->tx_ring[tx_index].tag_ctrl_info =
1306 				cpu_to_le16(skb_vlan_tag_get(skb));
1307 
1308 	}
1309 #endif
1310 	lp->tx_dma_addr[tx_index] =
1311 	    pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE);
1312 	lp->tx_ring[tx_index].buff_phy_addr =
1313 	    cpu_to_le32(lp->tx_dma_addr[tx_index]);
1314 
1315 	/*  Set FCS and LTINT bits */
1316 	wmb();
1317 	lp->tx_ring[tx_index].tx_flags |=
1318 	    cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT);
1319 
1320 	lp->tx_idx++;
1321 
1322 	/* Trigger an immediate send poll. */
1323 	writel( VAL1 | TDMD0, lp->mmio + CMD0);
1324 	writel( VAL2 | RDMD0,lp->mmio + CMD0);
1325 
1326 	if(amd8111e_tx_queue_avail(lp) < 0){
1327 		netif_stop_queue(dev);
1328 	}
1329 	spin_unlock_irqrestore(&lp->lock, flags);
1330 	return NETDEV_TX_OK;
1331 }
1332 /* This function returns all the memory mapped registers of the device. */
1333 static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf)
1334 {
1335 	void __iomem *mmio = lp->mmio;
1336 	/* Read only necessary registers */
1337 	buf[0] = readl(mmio + XMT_RING_BASE_ADDR0);
1338 	buf[1] = readl(mmio + XMT_RING_LEN0);
1339 	buf[2] = readl(mmio + RCV_RING_BASE_ADDR0);
1340 	buf[3] = readl(mmio + RCV_RING_LEN0);
1341 	buf[4] = readl(mmio + CMD0);
1342 	buf[5] = readl(mmio + CMD2);
1343 	buf[6] = readl(mmio + CMD3);
1344 	buf[7] = readl(mmio + CMD7);
1345 	buf[8] = readl(mmio + INT0);
1346 	buf[9] = readl(mmio + INTEN0);
1347 	buf[10] = readl(mmio + LADRF);
1348 	buf[11] = readl(mmio + LADRF+4);
1349 	buf[12] = readl(mmio + STAT0);
1350 }
1351 
1352 
1353 /* This function sets promiscuos mode, all-multi mode or the multicast address
1354  * list to the device.
1355  */
1356 static void amd8111e_set_multicast_list(struct net_device *dev)
1357 {
1358 	struct netdev_hw_addr *ha;
1359 	struct amd8111e_priv *lp = netdev_priv(dev);
1360 	u32 mc_filter[2] ;
1361 	int bit_num;
1362 
1363 	if(dev->flags & IFF_PROMISC){
1364 		writel( VAL2 | PROM, lp->mmio + CMD2);
1365 		return;
1366 	}
1367 	else
1368 		writel( PROM, lp->mmio + CMD2);
1369 	if (dev->flags & IFF_ALLMULTI ||
1370 	    netdev_mc_count(dev) > MAX_FILTER_SIZE) {
1371 		/* get all multicast packet */
1372 		mc_filter[1] = mc_filter[0] = 0xffffffff;
1373 		lp->options |= OPTION_MULTICAST_ENABLE;
1374 		amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
1375 		return;
1376 	}
1377 	if (netdev_mc_empty(dev)) {
1378 		/* get only own packets */
1379 		mc_filter[1] = mc_filter[0] = 0;
1380 		lp->options &= ~OPTION_MULTICAST_ENABLE;
1381 		amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
1382 		/* disable promiscuous mode */
1383 		writel(PROM, lp->mmio + CMD2);
1384 		return;
1385 	}
1386 	/* load all the multicast addresses in the logic filter */
1387 	lp->options |= OPTION_MULTICAST_ENABLE;
1388 	mc_filter[1] = mc_filter[0] = 0;
1389 	netdev_for_each_mc_addr(ha, dev) {
1390 		bit_num = (ether_crc_le(ETH_ALEN, ha->addr) >> 26) & 0x3f;
1391 		mc_filter[bit_num >> 5] |= 1 << (bit_num & 31);
1392 	}
1393 	amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
1394 
1395 	/* To eliminate PCI posting bug */
1396 	readl(lp->mmio + CMD2);
1397 
1398 }
1399 
1400 static void amd8111e_get_drvinfo(struct net_device *dev,
1401 				 struct ethtool_drvinfo *info)
1402 {
1403 	struct amd8111e_priv *lp = netdev_priv(dev);
1404 	struct pci_dev *pci_dev = lp->pci_dev;
1405 	strlcpy(info->driver, MODULE_NAME, sizeof(info->driver));
1406 	strlcpy(info->version, MODULE_VERS, sizeof(info->version));
1407 	snprintf(info->fw_version, sizeof(info->fw_version),
1408 		"%u", chip_version);
1409 	strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info));
1410 }
1411 
1412 static int amd8111e_get_regs_len(struct net_device *dev)
1413 {
1414 	return AMD8111E_REG_DUMP_LEN;
1415 }
1416 
1417 static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
1418 {
1419 	struct amd8111e_priv *lp = netdev_priv(dev);
1420 	regs->version = 0;
1421 	amd8111e_read_regs(lp, buf);
1422 }
1423 
1424 static int amd8111e_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
1425 {
1426 	struct amd8111e_priv *lp = netdev_priv(dev);
1427 	spin_lock_irq(&lp->lock);
1428 	mii_ethtool_gset(&lp->mii_if, ecmd);
1429 	spin_unlock_irq(&lp->lock);
1430 	return 0;
1431 }
1432 
1433 static int amd8111e_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
1434 {
1435 	struct amd8111e_priv *lp = netdev_priv(dev);
1436 	int res;
1437 	spin_lock_irq(&lp->lock);
1438 	res = mii_ethtool_sset(&lp->mii_if, ecmd);
1439 	spin_unlock_irq(&lp->lock);
1440 	return res;
1441 }
1442 
1443 static int amd8111e_nway_reset(struct net_device *dev)
1444 {
1445 	struct amd8111e_priv *lp = netdev_priv(dev);
1446 	return mii_nway_restart(&lp->mii_if);
1447 }
1448 
1449 static u32 amd8111e_get_link(struct net_device *dev)
1450 {
1451 	struct amd8111e_priv *lp = netdev_priv(dev);
1452 	return mii_link_ok(&lp->mii_if);
1453 }
1454 
1455 static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
1456 {
1457 	struct amd8111e_priv *lp = netdev_priv(dev);
1458 	wol_info->supported = WAKE_MAGIC|WAKE_PHY;
1459 	if (lp->options & OPTION_WOL_ENABLE)
1460 		wol_info->wolopts = WAKE_MAGIC;
1461 }
1462 
1463 static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
1464 {
1465 	struct amd8111e_priv *lp = netdev_priv(dev);
1466 	if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY))
1467 		return -EINVAL;
1468 	spin_lock_irq(&lp->lock);
1469 	if (wol_info->wolopts & WAKE_MAGIC)
1470 		lp->options |=
1471 			(OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE);
1472 	else if(wol_info->wolopts & WAKE_PHY)
1473 		lp->options |=
1474 			(OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE);
1475 	else
1476 		lp->options &= ~OPTION_WOL_ENABLE;
1477 	spin_unlock_irq(&lp->lock);
1478 	return 0;
1479 }
1480 
1481 static const struct ethtool_ops ops = {
1482 	.get_drvinfo = amd8111e_get_drvinfo,
1483 	.get_regs_len = amd8111e_get_regs_len,
1484 	.get_regs = amd8111e_get_regs,
1485 	.get_settings = amd8111e_get_settings,
1486 	.set_settings = amd8111e_set_settings,
1487 	.nway_reset = amd8111e_nway_reset,
1488 	.get_link = amd8111e_get_link,
1489 	.get_wol = amd8111e_get_wol,
1490 	.set_wol = amd8111e_set_wol,
1491 };
1492 
1493 /* This function handles all the  ethtool ioctls. It gives driver info,
1494  * gets/sets driver speed, gets memory mapped register values, forces
1495  * auto negotiation, sets/gets WOL options for ethtool application.
1496  */
1497 static int amd8111e_ioctl(struct net_device *dev , struct ifreq *ifr, int cmd)
1498 {
1499 	struct mii_ioctl_data *data = if_mii(ifr);
1500 	struct amd8111e_priv *lp = netdev_priv(dev);
1501 	int err;
1502 	u32 mii_regval;
1503 
1504 	switch(cmd) {
1505 	case SIOCGMIIPHY:
1506 		data->phy_id = lp->ext_phy_addr;
1507 
1508 	/* fallthru */
1509 	case SIOCGMIIREG:
1510 
1511 		spin_lock_irq(&lp->lock);
1512 		err = amd8111e_read_phy(lp, data->phy_id,
1513 			data->reg_num & PHY_REG_ADDR_MASK, &mii_regval);
1514 		spin_unlock_irq(&lp->lock);
1515 
1516 		data->val_out = mii_regval;
1517 		return err;
1518 
1519 	case SIOCSMIIREG:
1520 
1521 		spin_lock_irq(&lp->lock);
1522 		err = amd8111e_write_phy(lp, data->phy_id,
1523 			data->reg_num & PHY_REG_ADDR_MASK, data->val_in);
1524 		spin_unlock_irq(&lp->lock);
1525 
1526 		return err;
1527 
1528 	default:
1529 		/* do nothing */
1530 		break;
1531 	}
1532 	return -EOPNOTSUPP;
1533 }
1534 static int amd8111e_set_mac_address(struct net_device *dev, void *p)
1535 {
1536 	struct amd8111e_priv *lp = netdev_priv(dev);
1537 	int i;
1538 	struct sockaddr *addr = p;
1539 
1540 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
1541 	spin_lock_irq(&lp->lock);
1542 	/* Setting the MAC address to the device */
1543 	for (i = 0; i < ETH_ALEN; i++)
1544 		writeb( dev->dev_addr[i], lp->mmio + PADR + i );
1545 
1546 	spin_unlock_irq(&lp->lock);
1547 
1548 	return 0;
1549 }
1550 
1551 /* This function changes the mtu of the device. It restarts the device  to
1552  * initialize the descriptor with new receive buffers.
1553  */
1554 static int amd8111e_change_mtu(struct net_device *dev, int new_mtu)
1555 {
1556 	struct amd8111e_priv *lp = netdev_priv(dev);
1557 	int err;
1558 
1559 	if ((new_mtu < AMD8111E_MIN_MTU) || (new_mtu > AMD8111E_MAX_MTU))
1560 		return -EINVAL;
1561 
1562 	if (!netif_running(dev)) {
1563 		/* new_mtu will be used
1564 		 * when device starts netxt time
1565 		 */
1566 		dev->mtu = new_mtu;
1567 		return 0;
1568 	}
1569 
1570 	spin_lock_irq(&lp->lock);
1571 
1572         /* stop the chip */
1573 	writel(RUN, lp->mmio + CMD0);
1574 
1575 	dev->mtu = new_mtu;
1576 
1577 	err = amd8111e_restart(dev);
1578 	spin_unlock_irq(&lp->lock);
1579 	if(!err)
1580 		netif_start_queue(dev);
1581 	return err;
1582 }
1583 
1584 static int amd8111e_enable_magicpkt(struct amd8111e_priv *lp)
1585 {
1586 	writel( VAL1|MPPLBA, lp->mmio + CMD3);
1587 	writel( VAL0|MPEN_SW, lp->mmio + CMD7);
1588 
1589 	/* To eliminate PCI posting bug */
1590 	readl(lp->mmio + CMD7);
1591 	return 0;
1592 }
1593 
1594 static int amd8111e_enable_link_change(struct amd8111e_priv *lp)
1595 {
1596 
1597 	/* Adapter is already stoped/suspended/interrupt-disabled */
1598 	writel(VAL0|LCMODE_SW,lp->mmio + CMD7);
1599 
1600 	/* To eliminate PCI posting bug */
1601 	readl(lp->mmio + CMD7);
1602 	return 0;
1603 }
1604 
1605 /* This function is called when a packet transmission fails to complete
1606  * within a reasonable period, on the assumption that an interrupt have
1607  * failed or the interface is locked up. This function will reinitialize
1608  * the hardware.
1609  */
1610 static void amd8111e_tx_timeout(struct net_device *dev)
1611 {
1612 	struct amd8111e_priv *lp = netdev_priv(dev);
1613 	int err;
1614 
1615 	netdev_err(dev, "transmit timed out, resetting\n");
1616 
1617 	spin_lock_irq(&lp->lock);
1618 	err = amd8111e_restart(dev);
1619 	spin_unlock_irq(&lp->lock);
1620 	if(!err)
1621 		netif_wake_queue(dev);
1622 }
1623 static int amd8111e_suspend(struct pci_dev *pci_dev, pm_message_t state)
1624 {
1625 	struct net_device *dev = pci_get_drvdata(pci_dev);
1626 	struct amd8111e_priv *lp = netdev_priv(dev);
1627 
1628 	if (!netif_running(dev))
1629 		return 0;
1630 
1631 	/* disable the interrupt */
1632 	spin_lock_irq(&lp->lock);
1633 	amd8111e_disable_interrupt(lp);
1634 	spin_unlock_irq(&lp->lock);
1635 
1636 	netif_device_detach(dev);
1637 
1638 	/* stop chip */
1639 	spin_lock_irq(&lp->lock);
1640 	if(lp->options & OPTION_DYN_IPG_ENABLE)
1641 		del_timer_sync(&lp->ipg_data.ipg_timer);
1642 	amd8111e_stop_chip(lp);
1643 	spin_unlock_irq(&lp->lock);
1644 
1645 	if(lp->options & OPTION_WOL_ENABLE){
1646 		 /* enable wol */
1647 		if(lp->options & OPTION_WAKE_MAGIC_ENABLE)
1648 			amd8111e_enable_magicpkt(lp);
1649 		if(lp->options & OPTION_WAKE_PHY_ENABLE)
1650 			amd8111e_enable_link_change(lp);
1651 
1652 		pci_enable_wake(pci_dev, PCI_D3hot, 1);
1653 		pci_enable_wake(pci_dev, PCI_D3cold, 1);
1654 
1655 	}
1656 	else{
1657 		pci_enable_wake(pci_dev, PCI_D3hot, 0);
1658 		pci_enable_wake(pci_dev, PCI_D3cold, 0);
1659 	}
1660 
1661 	pci_save_state(pci_dev);
1662 	pci_set_power_state(pci_dev, PCI_D3hot);
1663 
1664 	return 0;
1665 }
1666 static int amd8111e_resume(struct pci_dev *pci_dev)
1667 {
1668 	struct net_device *dev = pci_get_drvdata(pci_dev);
1669 	struct amd8111e_priv *lp = netdev_priv(dev);
1670 
1671 	if (!netif_running(dev))
1672 		return 0;
1673 
1674 	pci_set_power_state(pci_dev, PCI_D0);
1675 	pci_restore_state(pci_dev);
1676 
1677 	pci_enable_wake(pci_dev, PCI_D3hot, 0);
1678 	pci_enable_wake(pci_dev, PCI_D3cold, 0); /* D3 cold */
1679 
1680 	netif_device_attach(dev);
1681 
1682 	spin_lock_irq(&lp->lock);
1683 	amd8111e_restart(dev);
1684 	/* Restart ipg timer */
1685 	if(lp->options & OPTION_DYN_IPG_ENABLE)
1686 		mod_timer(&lp->ipg_data.ipg_timer,
1687 				jiffies + IPG_CONVERGE_JIFFIES);
1688 	spin_unlock_irq(&lp->lock);
1689 
1690 	return 0;
1691 }
1692 
1693 static void amd8111e_config_ipg(struct net_device *dev)
1694 {
1695 	struct amd8111e_priv *lp = netdev_priv(dev);
1696 	struct ipg_info *ipg_data = &lp->ipg_data;
1697 	void __iomem *mmio = lp->mmio;
1698 	unsigned int prev_col_cnt = ipg_data->col_cnt;
1699 	unsigned int total_col_cnt;
1700 	unsigned int tmp_ipg;
1701 
1702 	if(lp->link_config.duplex == DUPLEX_FULL){
1703 		ipg_data->ipg = DEFAULT_IPG;
1704 		return;
1705 	}
1706 
1707 	if(ipg_data->ipg_state == SSTATE){
1708 
1709 		if(ipg_data->timer_tick == IPG_STABLE_TIME){
1710 
1711 			ipg_data->timer_tick = 0;
1712 			ipg_data->ipg = MIN_IPG - IPG_STEP;
1713 			ipg_data->current_ipg = MIN_IPG;
1714 			ipg_data->diff_col_cnt = 0xFFFFFFFF;
1715 			ipg_data->ipg_state = CSTATE;
1716 		}
1717 		else
1718 			ipg_data->timer_tick++;
1719 	}
1720 
1721 	if(ipg_data->ipg_state == CSTATE){
1722 
1723 		/* Get the current collision count */
1724 
1725 		total_col_cnt = ipg_data->col_cnt =
1726 				amd8111e_read_mib(mmio, xmt_collisions);
1727 
1728 		if ((total_col_cnt - prev_col_cnt) <
1729 				(ipg_data->diff_col_cnt)){
1730 
1731 			ipg_data->diff_col_cnt =
1732 				total_col_cnt - prev_col_cnt ;
1733 
1734 			ipg_data->ipg = ipg_data->current_ipg;
1735 		}
1736 
1737 		ipg_data->current_ipg += IPG_STEP;
1738 
1739 		if (ipg_data->current_ipg <= MAX_IPG)
1740 			tmp_ipg = ipg_data->current_ipg;
1741 		else{
1742 			tmp_ipg = ipg_data->ipg;
1743 			ipg_data->ipg_state = SSTATE;
1744 		}
1745 		writew((u32)tmp_ipg, mmio + IPG);
1746 		writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1);
1747 	}
1748 	 mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES);
1749 	return;
1750 
1751 }
1752 
1753 static void amd8111e_probe_ext_phy(struct net_device *dev)
1754 {
1755 	struct amd8111e_priv *lp = netdev_priv(dev);
1756 	int i;
1757 
1758 	for (i = 0x1e; i >= 0; i--) {
1759 		u32 id1, id2;
1760 
1761 		if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1))
1762 			continue;
1763 		if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2))
1764 			continue;
1765 		lp->ext_phy_id = (id1 << 16) | id2;
1766 		lp->ext_phy_addr = i;
1767 		return;
1768 	}
1769 	lp->ext_phy_id = 0;
1770 	lp->ext_phy_addr = 1;
1771 }
1772 
1773 static const struct net_device_ops amd8111e_netdev_ops = {
1774 	.ndo_open		= amd8111e_open,
1775 	.ndo_stop		= amd8111e_close,
1776 	.ndo_start_xmit		= amd8111e_start_xmit,
1777 	.ndo_tx_timeout		= amd8111e_tx_timeout,
1778 	.ndo_get_stats		= amd8111e_get_stats,
1779 	.ndo_set_rx_mode	= amd8111e_set_multicast_list,
1780 	.ndo_validate_addr	= eth_validate_addr,
1781 	.ndo_set_mac_address	= amd8111e_set_mac_address,
1782 	.ndo_do_ioctl		= amd8111e_ioctl,
1783 	.ndo_change_mtu		= amd8111e_change_mtu,
1784 #ifdef CONFIG_NET_POLL_CONTROLLER
1785 	.ndo_poll_controller	 = amd8111e_poll,
1786 #endif
1787 };
1788 
1789 static int amd8111e_probe_one(struct pci_dev *pdev,
1790 				  const struct pci_device_id *ent)
1791 {
1792 	int err, i;
1793 	unsigned long reg_addr,reg_len;
1794 	struct amd8111e_priv *lp;
1795 	struct net_device *dev;
1796 
1797 	err = pci_enable_device(pdev);
1798 	if(err){
1799 		dev_err(&pdev->dev, "Cannot enable new PCI device\n");
1800 		return err;
1801 	}
1802 
1803 	if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){
1804 		dev_err(&pdev->dev, "Cannot find PCI base address\n");
1805 		err = -ENODEV;
1806 		goto err_disable_pdev;
1807 	}
1808 
1809 	err = pci_request_regions(pdev, MODULE_NAME);
1810 	if(err){
1811 		dev_err(&pdev->dev, "Cannot obtain PCI resources\n");
1812 		goto err_disable_pdev;
1813 	}
1814 
1815 	pci_set_master(pdev);
1816 
1817 	/* Find power-management capability. */
1818 	if (!pdev->pm_cap) {
1819 		dev_err(&pdev->dev, "No Power Management capability\n");
1820 		err = -ENODEV;
1821 		goto err_free_reg;
1822 	}
1823 
1824 	/* Initialize DMA */
1825 	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) < 0) {
1826 		dev_err(&pdev->dev, "DMA not supported\n");
1827 		err = -ENODEV;
1828 		goto err_free_reg;
1829 	}
1830 
1831 	reg_addr = pci_resource_start(pdev, 0);
1832 	reg_len = pci_resource_len(pdev, 0);
1833 
1834 	dev = alloc_etherdev(sizeof(struct amd8111e_priv));
1835 	if (!dev) {
1836 		err = -ENOMEM;
1837 		goto err_free_reg;
1838 	}
1839 
1840 	SET_NETDEV_DEV(dev, &pdev->dev);
1841 
1842 #if AMD8111E_VLAN_TAG_USED
1843 	dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX ;
1844 #endif
1845 
1846 	lp = netdev_priv(dev);
1847 	lp->pci_dev = pdev;
1848 	lp->amd8111e_net_dev = dev;
1849 	lp->pm_cap = pdev->pm_cap;
1850 
1851 	spin_lock_init(&lp->lock);
1852 
1853 	lp->mmio = devm_ioremap(&pdev->dev, reg_addr, reg_len);
1854 	if (!lp->mmio) {
1855 		dev_err(&pdev->dev, "Cannot map device registers\n");
1856 		err = -ENOMEM;
1857 		goto err_free_dev;
1858 	}
1859 
1860 	/* Initializing MAC address */
1861 	for (i = 0; i < ETH_ALEN; i++)
1862 		dev->dev_addr[i] = readb(lp->mmio + PADR + i);
1863 
1864 	/* Setting user defined parametrs */
1865 	lp->ext_phy_option = speed_duplex[card_idx];
1866 	if(coalesce[card_idx])
1867 		lp->options |= OPTION_INTR_COAL_ENABLE;
1868 	if(dynamic_ipg[card_idx++])
1869 		lp->options |= OPTION_DYN_IPG_ENABLE;
1870 
1871 
1872 	/* Initialize driver entry points */
1873 	dev->netdev_ops = &amd8111e_netdev_ops;
1874 	dev->ethtool_ops = &ops;
1875 	dev->irq =pdev->irq;
1876 	dev->watchdog_timeo = AMD8111E_TX_TIMEOUT;
1877 	netif_napi_add(dev, &lp->napi, amd8111e_rx_poll, 32);
1878 
1879 #if AMD8111E_VLAN_TAG_USED
1880 	dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
1881 #endif
1882 	/* Probe the external PHY */
1883 	amd8111e_probe_ext_phy(dev);
1884 
1885 	/* setting mii default values */
1886 	lp->mii_if.dev = dev;
1887 	lp->mii_if.mdio_read = amd8111e_mdio_read;
1888 	lp->mii_if.mdio_write = amd8111e_mdio_write;
1889 	lp->mii_if.phy_id = lp->ext_phy_addr;
1890 
1891 	/* Set receive buffer length and set jumbo option*/
1892 	amd8111e_set_rx_buff_len(dev);
1893 
1894 
1895 	err = register_netdev(dev);
1896 	if (err) {
1897 		dev_err(&pdev->dev, "Cannot register net device\n");
1898 		goto err_free_dev;
1899 	}
1900 
1901 	pci_set_drvdata(pdev, dev);
1902 
1903 	/* Initialize software ipg timer */
1904 	if(lp->options & OPTION_DYN_IPG_ENABLE){
1905 		init_timer(&lp->ipg_data.ipg_timer);
1906 		lp->ipg_data.ipg_timer.data = (unsigned long) dev;
1907 		lp->ipg_data.ipg_timer.function = (void *)&amd8111e_config_ipg;
1908 		lp->ipg_data.ipg_timer.expires = jiffies +
1909 						 IPG_CONVERGE_JIFFIES;
1910 		lp->ipg_data.ipg = DEFAULT_IPG;
1911 		lp->ipg_data.ipg_state = CSTATE;
1912 	}
1913 
1914 	/*  display driver and device information */
1915     	chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28;
1916 	dev_info(&pdev->dev, "AMD-8111e Driver Version: %s\n", MODULE_VERS);
1917 	dev_info(&pdev->dev, "[ Rev %x ] PCI 10/100BaseT Ethernet %pM\n",
1918 		 chip_version, dev->dev_addr);
1919 	if (lp->ext_phy_id)
1920 		dev_info(&pdev->dev, "Found MII PHY ID 0x%08x at address 0x%02x\n",
1921 			 lp->ext_phy_id, lp->ext_phy_addr);
1922 	else
1923 		dev_info(&pdev->dev, "Couldn't detect MII PHY, assuming address 0x01\n");
1924 
1925     	return 0;
1926 
1927 err_free_dev:
1928 	free_netdev(dev);
1929 
1930 err_free_reg:
1931 	pci_release_regions(pdev);
1932 
1933 err_disable_pdev:
1934 	pci_disable_device(pdev);
1935 	return err;
1936 
1937 }
1938 
1939 static void amd8111e_remove_one(struct pci_dev *pdev)
1940 {
1941 	struct net_device *dev = pci_get_drvdata(pdev);
1942 
1943 	if (dev) {
1944 		unregister_netdev(dev);
1945 		free_netdev(dev);
1946 		pci_release_regions(pdev);
1947 		pci_disable_device(pdev);
1948 	}
1949 }
1950 
1951 static const struct pci_device_id amd8111e_pci_tbl[] = {
1952 	{
1953 	 .vendor = PCI_VENDOR_ID_AMD,
1954 	 .device = PCI_DEVICE_ID_AMD8111E_7462,
1955 	},
1956 	{
1957 	 .vendor = 0,
1958 	}
1959 };
1960 MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl);
1961 
1962 static struct pci_driver amd8111e_driver = {
1963 	.name   	= MODULE_NAME,
1964 	.id_table	= amd8111e_pci_tbl,
1965 	.probe		= amd8111e_probe_one,
1966 	.remove		= amd8111e_remove_one,
1967 	.suspend	= amd8111e_suspend,
1968 	.resume		= amd8111e_resume
1969 };
1970 
1971 module_pci_driver(amd8111e_driver);
1972