xref: /linux/drivers/net/ethernet/alacritech/slic.h (revision 7ae9fb1b7ecbb5d85d07857943f677fd1a559b18)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 
3 #ifndef _SLIC_H
4 #define _SLIC_H
5 
6 #include <linux/types.h>
7 #include <linux/netdevice.h>
8 #include <linux/spinlock_types.h>
9 #include <linux/dma-mapping.h>
10 #include <linux/pci.h>
11 #include <linux/list.h>
12 #include <linux/u64_stats_sync.h>
13 
14 #define SLIC_VGBSTAT_XPERR		0x40000000
15 #define SLIC_VGBSTAT_XERRSHFT		25
16 #define SLIC_VGBSTAT_XCSERR		0x23
17 #define SLIC_VGBSTAT_XUFLOW		0x22
18 #define SLIC_VGBSTAT_XHLEN		0x20
19 #define SLIC_VGBSTAT_NETERR		0x01000000
20 #define SLIC_VGBSTAT_NERRSHFT		16
21 #define SLIC_VGBSTAT_NERRMSK		0x1ff
22 #define SLIC_VGBSTAT_NCSERR		0x103
23 #define SLIC_VGBSTAT_NUFLOW		0x102
24 #define SLIC_VGBSTAT_NHLEN		0x100
25 #define SLIC_VGBSTAT_LNKERR		0x00000080
26 #define SLIC_VGBSTAT_LERRMSK		0xff
27 #define SLIC_VGBSTAT_LDEARLY		0x86
28 #define SLIC_VGBSTAT_LBOFLO		0x85
29 #define SLIC_VGBSTAT_LCODERR		0x84
30 #define SLIC_VGBSTAT_LDBLNBL		0x83
31 #define SLIC_VGBSTAT_LCRCERR		0x82
32 #define SLIC_VGBSTAT_LOFLO		0x81
33 #define SLIC_VGBSTAT_LUFLO		0x80
34 
35 #define SLIC_IRHDDR_FLEN_MSK		0x0000ffff
36 #define SLIC_IRHDDR_SVALID		0x80000000
37 #define SLIC_IRHDDR_ERR			0x10000000
38 
39 #define SLIC_VRHSTAT_802OE		0x80000000
40 #define SLIC_VRHSTAT_TPOFLO		0x10000000
41 #define SLIC_VRHSTATB_802UE		0x80000000
42 #define SLIC_VRHSTATB_RCVE		0x40000000
43 #define SLIC_VRHSTATB_BUFF		0x20000000
44 #define SLIC_VRHSTATB_CARRE		0x08000000
45 #define SLIC_VRHSTATB_LONGE		0x02000000
46 #define SLIC_VRHSTATB_PREA		0x01000000
47 #define SLIC_VRHSTATB_CRC		0x00800000
48 #define SLIC_VRHSTATB_DRBL		0x00400000
49 #define SLIC_VRHSTATB_CODE		0x00200000
50 #define SLIC_VRHSTATB_TPCSUM		0x00100000
51 #define SLIC_VRHSTATB_TPHLEN		0x00080000
52 #define SLIC_VRHSTATB_IPCSUM		0x00040000
53 #define SLIC_VRHSTATB_IPLERR		0x00020000
54 #define SLIC_VRHSTATB_IPHERR		0x00010000
55 
56 #define SLIC_CMD_XMT_REQ		0x01
57 #define SLIC_CMD_TYPE_DUMB		3
58 
59 #define SLIC_RESET_MAGIC		0xDEAD
60 #define SLIC_ICR_INT_OFF		0
61 #define SLIC_ICR_INT_ON			1
62 #define SLIC_ICR_INT_MASK		2
63 
64 #define SLIC_ISR_ERR			0x80000000
65 #define SLIC_ISR_RCV			0x40000000
66 #define SLIC_ISR_CMD			0x20000000
67 #define SLIC_ISR_IO			0x60000000
68 #define SLIC_ISR_UPC			0x10000000
69 #define SLIC_ISR_LEVENT			0x08000000
70 #define SLIC_ISR_RMISS			0x02000000
71 #define SLIC_ISR_UPCERR			0x01000000
72 #define SLIC_ISR_XDROP			0x00800000
73 #define SLIC_ISR_UPCBSY			0x00020000
74 
75 #define SLIC_ISR_PING_MASK		0x00700000
76 #define SLIC_ISR_UPCERR_MASK		(SLIC_ISR_UPCERR | SLIC_ISR_UPCBSY)
77 #define SLIC_ISR_UPC_MASK		(SLIC_ISR_UPC | SLIC_ISR_UPCERR_MASK)
78 #define SLIC_WCS_START			0x80000000
79 #define SLIC_WCS_COMPARE		0x40000000
80 #define SLIC_RCVWCS_BEGIN		0x40000000
81 #define SLIC_RCVWCS_FINISH		0x80000000
82 
83 #define SLIC_MIICR_REG_16		0x00100000
84 #define SLIC_MRV_REG16_XOVERON		0x0068
85 
86 #define SLIC_GIG_LINKUP			0x0001
87 #define SLIC_GIG_FULLDUPLEX		0x0002
88 #define SLIC_GIG_SPEED_MASK		0x000C
89 #define SLIC_GIG_SPEED_1000		0x0008
90 #define SLIC_GIG_SPEED_100		0x0004
91 #define SLIC_GIG_SPEED_10		0x0000
92 
93 #define SLIC_GMCR_RESET			0x80000000
94 #define SLIC_GMCR_GBIT			0x20000000
95 #define SLIC_GMCR_FULLD			0x10000000
96 #define SLIC_GMCR_GAPBB_SHIFT		14
97 #define SLIC_GMCR_GAPR1_SHIFT		7
98 #define SLIC_GMCR_GAPR2_SHIFT		0
99 #define SLIC_GMCR_GAPBB_1000		0x60
100 #define SLIC_GMCR_GAPR1_1000		0x2C
101 #define SLIC_GMCR_GAPR2_1000		0x40
102 #define SLIC_GMCR_GAPBB_100		0x70
103 #define SLIC_GMCR_GAPR1_100		0x2C
104 #define SLIC_GMCR_GAPR2_100		0x40
105 
106 #define SLIC_XCR_RESET			0x80000000
107 #define SLIC_XCR_XMTEN			0x40000000
108 #define SLIC_XCR_PAUSEEN		0x20000000
109 #define SLIC_XCR_LOADRNG		0x10000000
110 
111 #define SLIC_GXCR_RESET			0x80000000
112 #define SLIC_GXCR_XMTEN			0x40000000
113 #define SLIC_GXCR_PAUSEEN		0x20000000
114 
115 #define SLIC_GRCR_RESET			0x80000000
116 #define SLIC_GRCR_RCVEN			0x40000000
117 #define SLIC_GRCR_RCVALL		0x20000000
118 #define SLIC_GRCR_RCVBAD		0x10000000
119 #define SLIC_GRCR_CTLEN			0x08000000
120 #define SLIC_GRCR_ADDRAEN		0x02000000
121 #define SLIC_GRCR_HASHSIZE_SHIFT	17
122 #define SLIC_GRCR_HASHSIZE		14
123 
124 /* Reset Register */
125 #define SLIC_REG_RESET			0x0000
126 /* Interrupt Control Register */
127 #define SLIC_REG_ICR			0x0008
128 /* Interrupt status pointer */
129 #define SLIC_REG_ISP			0x0010
130 /* Interrupt status */
131 #define SLIC_REG_ISR			0x0018
132 /* Header buffer address reg
133  * 31-8 - phy addr of set of contiguous hdr buffers
134  *  7-0 - number of buffers passed
135  * Buffers are 256 bytes long on 256-byte boundaries.
136  */
137 #define SLIC_REG_HBAR			0x0020
138 /* Data buffer handle & address reg
139  * 4 sets of registers; Buffers are 2K bytes long 2 per 4K page.
140  */
141 #define SLIC_REG_DBAR			0x0028
142 /* Xmt Cmd buf addr regs.
143  * 1 per XMT interface
144  * 31-5 - phy addr of host command buffer
145  *  4-0 - length of cmd in multiples of 32 bytes
146  * Buffers are 32 bytes up to 512 bytes long
147  */
148 #define SLIC_REG_CBAR			0x0030
149 /* Write control store */
150 #define	SLIC_REG_WCS			0x0034
151 /*Response buffer address reg.
152  * 31-8 - phy addr of set of contiguous response buffers
153  * 7-0 - number of buffers passed
154  * Buffers are 32 bytes long on 32-byte boundaries.
155  */
156 #define	SLIC_REG_RBAR			0x0038
157 /* Read statistics (UPR) */
158 #define	SLIC_REG_RSTAT			0x0040
159 /* Read link status */
160 #define	SLIC_REG_LSTAT			0x0048
161 /* Write Mac Config */
162 #define	SLIC_REG_WMCFG			0x0050
163 /* Write phy register */
164 #define SLIC_REG_WPHY			0x0058
165 /* Rcv Cmd buf addr reg */
166 #define	SLIC_REG_RCBAR			0x0060
167 /* Read SLIC Config*/
168 #define SLIC_REG_RCONFIG		0x0068
169 /* Interrupt aggregation time */
170 #define SLIC_REG_INTAGG			0x0070
171 /* Write XMIT config reg */
172 #define	SLIC_REG_WXCFG			0x0078
173 /* Write RCV config reg */
174 #define	SLIC_REG_WRCFG			0x0080
175 /* Write rcv addr a low */
176 #define	SLIC_REG_WRADDRAL		0x0088
177 /* Write rcv addr a high */
178 #define	SLIC_REG_WRADDRAH		0x0090
179 /* Write rcv addr b low */
180 #define	SLIC_REG_WRADDRBL		0x0098
181 /* Write rcv addr b high */
182 #define	SLIC_REG_WRADDRBH		0x00a0
183 /* Low bits of mcast mask */
184 #define	SLIC_REG_MCASTLOW		0x00a8
185 /* High bits of mcast mask */
186 #define	SLIC_REG_MCASTHIGH		0x00b0
187 /* Ping the card */
188 #define SLIC_REG_PING			0x00b8
189 /* Dump command */
190 #define SLIC_REG_DUMP_CMD		0x00c0
191 /* Dump data pointer */
192 #define SLIC_REG_DUMP_DATA		0x00c8
193 /* Read card's pci_status register */
194 #define	SLIC_REG_PCISTATUS		0x00d0
195 /* Write hostid field */
196 #define SLIC_REG_WRHOSTID		0x00d8
197 /* Put card in a low power state */
198 #define SLIC_REG_LOW_POWER		0x00e0
199 /* Force slic into quiescent state  before soft reset */
200 #define SLIC_REG_QUIESCE		0x00e8
201 /* Reset interface queues */
202 #define SLIC_REG_RESET_IFACE		0x00f0
203 /* Register is only written when it has changed.
204  * Bits 63-32 for host i/f addrs.
205  */
206 #define SLIC_REG_ADDR_UPPER		0x00f8
207 /* 64 bit Header buffer address reg */
208 #define SLIC_REG_HBAR64			0x0100
209 /* 64 bit Data buffer handle & address reg */
210 #define SLIC_REG_DBAR64			0x0108
211 /* 64 bit Xmt Cmd buf addr regs. */
212 #define SLIC_REG_CBAR64			0x0110
213 /* 64 bit Response buffer address reg.*/
214 #define SLIC_REG_RBAR64			0x0118
215 /* 64 bit Rcv Cmd buf addr reg*/
216 #define	SLIC_REG_RCBAR64		0x0120
217 /* Read statistics (64 bit UPR) */
218 #define	SLIC_REG_RSTAT64		0x0128
219 /* Download Gigabit RCV sequencer ucode */
220 #define SLIC_REG_RCV_WCS		0x0130
221 /* Write VlanId field */
222 #define SLIC_REG_WRVLANID		0x0138
223 /* Read Transformer info */
224 #define SLIC_REG_READ_XF_INFO		0x0140
225 /* Write Transformer info */
226 #define SLIC_REG_WRITE_XF_INFO		0x0148
227 /* Write card ticks per second */
228 #define SLIC_REG_TICKS_PER_SEC		0x0170
229 #define SLIC_REG_HOSTID			0x1554
230 
231 #define PCI_VENDOR_ID_ALACRITECH		0x139A
232 #define PCI_DEVICE_ID_ALACRITECH_MOJAVE		0x0005
233 #define PCI_SUBDEVICE_ID_ALACRITECH_1000X1	0x0005
234 #define PCI_SUBDEVICE_ID_ALACRITECH_1000X1_2	0x0006
235 #define PCI_SUBDEVICE_ID_ALACRITECH_1000X1F	0x0007
236 #define PCI_SUBDEVICE_ID_ALACRITECH_CICADA	0x0008
237 #define PCI_SUBDEVICE_ID_ALACRITECH_SES1001T	0x2006
238 #define PCI_SUBDEVICE_ID_ALACRITECH_SES1001F	0x2007
239 #define PCI_DEVICE_ID_ALACRITECH_OASIS		0x0007
240 #define PCI_SUBDEVICE_ID_ALACRITECH_SEN2002XT	0x000B
241 #define PCI_SUBDEVICE_ID_ALACRITECH_SEN2002XF	0x000C
242 #define PCI_SUBDEVICE_ID_ALACRITECH_SEN2001XT	0x000D
243 #define PCI_SUBDEVICE_ID_ALACRITECH_SEN2001XF	0x000E
244 #define PCI_SUBDEVICE_ID_ALACRITECH_SEN2104EF	0x000F
245 #define PCI_SUBDEVICE_ID_ALACRITECH_SEN2104ET	0x0010
246 #define PCI_SUBDEVICE_ID_ALACRITECH_SEN2102EF	0x0011
247 #define PCI_SUBDEVICE_ID_ALACRITECH_SEN2102ET	0x0012
248 
249 /* Note: power of two required for number descriptors  */
250 #define SLIC_NUM_RX_LES			256
251 #define SLIC_RX_BUFF_SIZE		2048
252 #define SLIC_RX_BUFF_ALIGN		256
253 #define SLIC_RX_BUFF_HDR_SIZE		34
254 #define SLIC_MAX_REQ_RX_DESCS		1
255 
256 #define SLIC_NUM_TX_DESCS		256
257 #define SLIC_TX_DESC_ALIGN		32
258 #define SLIC_MIN_TX_WAKEUP_DESCS	10
259 #define SLIC_MAX_REQ_TX_DESCS		1
260 #define SLIC_MAX_TX_COMPLETIONS		100
261 
262 #define SLIC_NUM_STAT_DESCS		128
263 #define SLIC_STATS_DESC_ALIGN		256
264 
265 #define SLIC_NUM_STAT_DESC_ARRAYS	4
266 #define SLIC_INVALID_STAT_DESC_IDX	0xffffffff
267 
268 #define SLIC_UPR_LSTAT			0
269 #define SLIC_UPR_CONFIG			1
270 
271 #define SLIC_EEPROM_SIZE		128
272 #define SLIC_EEPROM_MAGIC		0xa5a5
273 
274 #define SLIC_FIRMWARE_MOJAVE		"slicoss/gbdownload.sys"
275 #define SLIC_FIRMWARE_OASIS		"slicoss/oasisdownload.sys"
276 #define SLIC_RCV_FIRMWARE_MOJAVE	"slicoss/gbrcvucode.sys"
277 #define SLIC_RCV_FIRMWARE_OASIS		"slicoss/oasisrcvucode.sys"
278 #define SLIC_FIRMWARE_MIN_SIZE		64
279 #define SLIC_FIRMWARE_MAX_SECTIONS	3
280 
281 #define SLIC_MODEL_MOJAVE		0
282 #define SLIC_MODEL_OASIS		1
283 
284 #define SLIC_INC_STATS_COUNTER(st, counter)	\
285 do {						\
286 	u64_stats_update_begin(&(st)->syncp);	\
287 	(st)->counter++;			\
288 	u64_stats_update_end(&(st)->syncp);	\
289 } while (0)
290 
291 #define SLIC_GET_STATS_COUNTER(newst, st, counter)		\
292 {								\
293 	unsigned int start;					\
294 	do {							\
295 		start = u64_stats_fetch_begin(&(st)->syncp);	\
296 		newst = (st)->counter;				\
297 	} while (u64_stats_fetch_retry(&(st)->syncp, start));	\
298 }
299 
300 struct slic_upr {
301 	dma_addr_t paddr;
302 	unsigned int type;
303 	struct list_head list;
304 };
305 
306 struct slic_upr_list {
307 	bool pending;
308 	struct list_head list;
309 	/* upr list lock */
310 	spinlock_t lock;
311 };
312 
313 /* SLIC EEPROM structure for Mojave */
314 struct slic_mojave_eeprom {
315 	__le16 id;		/* 00 EEPROM/FLASH Magic code 'A5A5'*/
316 	__le16 eeprom_code_size;/* 01 Size of EEPROM Codes (bytes * 4)*/
317 	__le16 flash_size;	/* 02 Flash size */
318 	__le16 eeprom_size;	/* 03 EEPROM Size */
319 	__le16 vendor_id;	/* 04 Vendor ID */
320 	__le16 dev_id;		/* 05 Device ID */
321 	u8 rev_id;		/* 06 Revision ID */
322 	u8 class_code[3];	/* 07 Class Code */
323 	u8 irqpin_dbg;		/* 08 Debug Interrupt pin */
324 	u8 irqpin;		/*    Network Interrupt Pin */
325 	u8 min_grant;		/* 09 Minimum grant */
326 	u8 max_lat;		/*    Maximum Latency */
327 	__le16 pci_stat;	/* 10 PCI Status */
328 	__le16 sub_vendor_id;	/* 11 Subsystem Vendor Id */
329 	__le16 sub_id;		/* 12 Subsystem ID */
330 	__le16 dev_id_dbg;	/* 13 Debug Device Id */
331 	__le16 ramrom;		/* 14 Dram/Rom function */
332 	__le16 dram_size2pci;	/* 15 DRAM size to PCI (bytes * 64K) */
333 	__le16 rom_size2pci;	/* 16 ROM extension size to PCI (bytes * 4k) */
334 	u8 pad[2];		/* 17 Padding */
335 	u8 freetime;		/* 18 FreeTime setting */
336 	u8 ifctrl;		/* 10-bit interface control (Mojave only) */
337 	__le16 dram_size;	/* 19 DRAM size (bytes * 64k) */
338 	u8 mac[ETH_ALEN];	/* 20 MAC addresses */
339 	u8 mac2[ETH_ALEN];
340 	u8 pad2[6];
341 	u16 dev_id2;		/* Device ID for 2nd PCI function */
342 	u8 irqpin2;		/* Interrupt pin for 2nd PCI function */
343 	u8 class_code2[3];	/* Class Code for 2nd PCI function */
344 	u16 cfg_byte6;		/* Config Byte 6 */
345 	u16 pme_cap;		/* Power Mgment capabilities */
346 	u16 nwclk_ctrl;		/* NetworkClockControls */
347 	u8 fru_format;		/* Alacritech FRU format type */
348 	u8 fru_assembly[6];	/* Alacritech FRU information */
349 	u8 fru_rev[2];
350 	u8 fru_serial[14];
351 	u8 fru_pad[3];
352 	u8 oem_fru[28];		/* optional OEM FRU format type */
353 	u8 pad3[4];		/* Pad to 128 bytes - includes 2 cksum bytes
354 				 * (if OEM FRU info exists) and two unusable
355 				 * bytes at the end
356 				 */
357 };
358 
359 /* SLIC EEPROM structure for Oasis */
360 struct slic_oasis_eeprom {
361 	__le16 id;		/* 00 EEPROM/FLASH Magic code 'A5A5' */
362 	__le16 eeprom_code_size;/* 01 Size of EEPROM Codes (bytes * 4)*/
363 	__le16 spidev0_cfg;	/* 02 Flash Config for SPI device 0 */
364 	__le16 spidev1_cfg;	/* 03 Flash Config for SPI device 1 */
365 	__le16 vendor_id;	/* 04 Vendor ID */
366 	__le16 dev_id;		/* 05 Device ID (function 0) */
367 	u8 rev_id;		/* 06 Revision ID */
368 	u8 class_code0[3];	/* 07 Class Code for PCI function 0 */
369 	u8 irqpin1;		/* 08 Interrupt pin for PCI function 1*/
370 	u8 class_code1[3];	/* 09 Class Code for PCI function 1 */
371 	u8 irqpin2;		/* 10 Interrupt pin for PCI function 2*/
372 	u8 irqpin0;		/*    Interrupt pin for PCI function 0*/
373 	u8 min_grant;		/* 11 Minimum grant */
374 	u8 max_lat;		/*    Maximum Latency */
375 	__le16 sub_vendor_id;	/* 12 Subsystem Vendor Id */
376 	__le16 sub_id;		/* 13 Subsystem ID */
377 	__le16 flash_size;	/* 14 Flash size (bytes / 4K) */
378 	__le16 dram_size2pci;	/* 15 DRAM size to PCI (bytes / 64K) */
379 	__le16 rom_size2pci;	/* 16 Flash (ROM extension) size to PCI
380 				 *   (bytes / 4K)
381 				 */
382 	__le16 dev_id1;		/* 17 Device Id (function 1) */
383 	__le16 dev_id2;		/* 18 Device Id (function 2) */
384 	__le16 dev_stat_cfg;	/* 19 Device Status Config Bytes 6-7 */
385 	__le16 pme_cap;		/* 20 Power Mgment capabilities */
386 	u8 msi_cap;		/* 21 MSI capabilities */
387 	u8 clock_div;		/*    Clock divider */
388 	__le16 pci_stat_lo;	/* 22 PCI Status bits 15:0 */
389 	__le16 pci_stat_hi;	/* 23 PCI Status bits 31:16 */
390 	__le16 dram_cfg_lo;	/* 24 DRAM Configuration bits 15:0 */
391 	__le16 dram_cfg_hi;	/* 25 DRAM Configuration bits 31:16 */
392 	__le16 dram_size;	/* 26 DRAM size (bytes / 64K) */
393 	__le16 gpio_tbi_ctrl;	/* 27 GPIO/TBI controls for functions 1/0 */
394 	__le16 eeprom_size;	/* 28 EEPROM Size */
395 	u8 mac[ETH_ALEN];	/* 29 MAC addresses (2 ports) */
396 	u8 mac2[ETH_ALEN];
397 	u8 fru_format;		/* 35 Alacritech FRU format type */
398 	u8 fru_assembly[6];	/* Alacritech FRU information */
399 	u8 fru_rev[2];
400 	u8 fru_serial[14];
401 	u8 fru_pad[3];
402 	u8 oem_fru[28];		/* optional OEM FRU information */
403 	u8 pad[4];		/* Pad to 128 bytes - includes 2 checksum bytes
404 				 * (if OEM FRU info exists) and two unusable
405 				 * bytes at the end
406 				 */
407 };
408 
409 struct slic_stats {
410 	u64 rx_packets;
411 	u64 rx_bytes;
412 	u64 rx_mcasts;
413 	u64 rx_errors;
414 	u64 tx_packets;
415 	u64 tx_bytes;
416 	/* HW STATS */
417 	u64 rx_buff_miss;
418 	u64 tx_dropped;
419 	u64 irq_errs;
420 	/* transport layer */
421 	u64 rx_tpcsum;
422 	u64 rx_tpoflow;
423 	u64 rx_tphlen;
424 	/* ip layer */
425 	u64 rx_ipcsum;
426 	u64 rx_iplen;
427 	u64 rx_iphlen;
428 	/* link layer */
429 	u64 rx_early;
430 	u64 rx_buffoflow;
431 	u64 rx_lcode;
432 	u64 rx_drbl;
433 	u64 rx_crc;
434 	u64 rx_oflow802;
435 	u64 rx_uflow802;
436 	/* oasis only */
437 	u64 tx_carrier;
438 	struct u64_stats_sync syncp;
439 };
440 
441 struct slic_shmem_data {
442 	__le32 isr;
443 	__le32 link;
444 };
445 
446 struct slic_shmem {
447 	dma_addr_t isr_paddr;
448 	dma_addr_t link_paddr;
449 	struct slic_shmem_data *shmem_data;
450 };
451 
452 struct slic_rx_info_oasis {
453 	__le32 frame_status;
454 	__le32 frame_status_b;
455 	__le32 time_stamp;
456 	__le32 checksum;
457 };
458 
459 struct slic_rx_info_mojave {
460 	__le32 frame_status;
461 	__le16 byte_cnt;
462 	__le16 tp_chksum;
463 	__le16 ctx_hash;
464 	__le16 mac_hash;
465 	__le16 buff_lnk;
466 };
467 
468 struct slic_stat_desc {
469 	__le32 hnd;
470 	__u8 pad[8];
471 	__le32 status;
472 	__u8 pad2[16];
473 };
474 
475 struct slic_stat_queue {
476 	struct slic_stat_desc *descs[SLIC_NUM_STAT_DESC_ARRAYS];
477 	dma_addr_t paddr[SLIC_NUM_STAT_DESC_ARRAYS];
478 	unsigned int addr_offset[SLIC_NUM_STAT_DESC_ARRAYS];
479 	unsigned int active_array;
480 	unsigned int len;
481 	unsigned int done_idx;
482 	size_t mem_size;
483 };
484 
485 struct slic_tx_desc {
486 	__le32 hnd;
487 	__le32 rsvd;
488 	u8 cmd;
489 	u8 flags;
490 	__le16 rsvd2;
491 	__le32 totlen;
492 	__le32 paddrl;
493 	__le32 paddrh;
494 	__le32 len;
495 	__le32 type;
496 };
497 
498 struct slic_tx_buffer {
499 	struct sk_buff *skb;
500 	DEFINE_DMA_UNMAP_ADDR(map_addr);
501 	DEFINE_DMA_UNMAP_LEN(map_len);
502 	struct slic_tx_desc *desc;
503 	dma_addr_t desc_paddr;
504 };
505 
506 struct slic_tx_queue {
507 	struct dma_pool *dma_pool;
508 	struct slic_tx_buffer *txbuffs;
509 	unsigned int len;
510 	unsigned int put_idx;
511 	unsigned int done_idx;
512 };
513 
514 struct slic_rx_desc {
515 	u8 pad[16];
516 	__le32 buffer;
517 	__le32 length;
518 	__le32 status;
519 };
520 
521 struct slic_rx_buffer {
522 	struct sk_buff *skb;
523 	DEFINE_DMA_UNMAP_ADDR(map_addr);
524 	DEFINE_DMA_UNMAP_LEN(map_len);
525 	unsigned int addr_offset;
526 };
527 
528 struct slic_rx_queue {
529 	struct slic_rx_buffer *rxbuffs;
530 	unsigned int len;
531 	unsigned int done_idx;
532 	unsigned int put_idx;
533 };
534 
535 struct slic_device {
536 	struct pci_dev *pdev;
537 	struct net_device *netdev;
538 	void __iomem *regs;
539 	/* upper address setting lock */
540 	spinlock_t upper_lock;
541 	struct slic_shmem shmem;
542 	struct napi_struct napi;
543 	struct slic_rx_queue rxq;
544 	struct slic_tx_queue txq;
545 	struct slic_stat_queue stq;
546 	struct slic_stats stats;
547 	struct slic_upr_list upr_list;
548 	/* link configuration lock */
549 	spinlock_t link_lock;
550 	bool promisc;
551 	int speed;
552 	unsigned int duplex;
553 	bool is_fiber;
554 	unsigned char model;
555 };
556 
slic_read(struct slic_device * sdev,unsigned int reg)557 static inline u32 slic_read(struct slic_device *sdev, unsigned int reg)
558 {
559 	return ioread32(sdev->regs + reg);
560 }
561 
slic_write(struct slic_device * sdev,unsigned int reg,u32 val)562 static inline void slic_write(struct slic_device *sdev, unsigned int reg,
563 			      u32 val)
564 {
565 	iowrite32(val, sdev->regs + reg);
566 }
567 
slic_flush_write(struct slic_device * sdev)568 static inline void slic_flush_write(struct slic_device *sdev)
569 {
570 	(void)ioread32(sdev->regs + SLIC_REG_HOSTID);
571 }
572 
573 #endif /* _SLIC_H */
574