1 /* 2 * Amiga Linux/m68k and Linux/PPC Zorro NS8390 Ethernet Driver 3 * 4 * (C) Copyright 1998-2000 by some Elitist 680x0 Users(TM) 5 * 6 * --------------------------------------------------------------------------- 7 * 8 * This program is based on all the other NE2000 drivers for Linux 9 * 10 * --------------------------------------------------------------------------- 11 * 12 * This file is subject to the terms and conditions of the GNU General Public 13 * License. See the file COPYING in the main directory of the Linux 14 * distribution for more details. 15 * 16 * --------------------------------------------------------------------------- 17 * 18 * The Ariadne II and X-Surf are Zorro-II boards containing Realtek RTL8019AS 19 * Ethernet Controllers. 20 */ 21 22 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 23 24 #include <linux/module.h> 25 #include <linux/kernel.h> 26 #include <linux/errno.h> 27 #include <linux/init.h> 28 #include <linux/delay.h> 29 #include <linux/netdevice.h> 30 #include <linux/etherdevice.h> 31 #include <linux/zorro.h> 32 #include <linux/jiffies.h> 33 34 #include <asm/irq.h> 35 #include <asm/amigaints.h> 36 #include <asm/amigahw.h> 37 38 #define EI_SHIFT(x) (ei_local->reg_offset[x]) 39 #define ei_inb(port) in_8(port) 40 #define ei_outb(val, port) out_8(port, val) 41 #define ei_inb_p(port) in_8(port) 42 #define ei_outb_p(val, port) out_8(port, val) 43 44 static const char version[] = 45 "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; 46 47 static u32 zorro8390_msg_enable; 48 49 #include "lib8390.c" 50 51 #define DRV_NAME "zorro8390" 52 53 #define NE_BASE (dev->base_addr) 54 #define NE_CMD (0x00 * 2) 55 #define NE_DATAPORT (0x10 * 2) /* NatSemi-defined port window offset */ 56 #define NE_RESET (0x1f * 2) /* Issue a read to reset, 57 * a write to clear. */ 58 #define NE_IO_EXTENT (0x20 * 2) 59 60 #define NE_EN0_ISR (0x07 * 2) 61 #define NE_EN0_DCFG (0x0e * 2) 62 63 #define NE_EN0_RSARLO (0x08 * 2) 64 #define NE_EN0_RSARHI (0x09 * 2) 65 #define NE_EN0_RCNTLO (0x0a * 2) 66 #define NE_EN0_RXCR (0x0c * 2) 67 #define NE_EN0_TXCR (0x0d * 2) 68 #define NE_EN0_RCNTHI (0x0b * 2) 69 #define NE_EN0_IMR (0x0f * 2) 70 71 #define NESM_START_PG 0x40 /* First page of TX buffer */ 72 #define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */ 73 74 #define WORDSWAP(a) ((((a) >> 8) & 0xff) | ((a) << 8)) 75 76 static struct card_info { 77 zorro_id id; 78 const char *name; 79 unsigned int offset; 80 } cards[] = { 81 { ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2, "Ariadne II", 0x0600 }, 82 { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, "X-Surf", 0x8600 }, 83 }; 84 85 /* Hard reset the card. This used to pause for the same period that a 86 * 8390 reset command required, but that shouldn't be necessary. 87 */ 88 static void zorro8390_reset_8390(struct net_device *dev) 89 { 90 unsigned long reset_start_time = jiffies; 91 struct ei_device *ei_local = netdev_priv(dev); 92 93 netif_dbg(ei_local, hw, dev, "resetting - t=%ld...\n", jiffies); 94 95 z_writeb(z_readb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); 96 97 ei_status.txing = 0; 98 ei_status.dmaing = 0; 99 100 /* This check _should_not_ be necessary, omit eventually. */ 101 while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RESET) == 0) 102 if (time_after(jiffies, reset_start_time + 2 * HZ / 100)) { 103 netdev_warn(dev, "%s: did not complete\n", __func__); 104 break; 105 } 106 z_writeb(ENISR_RESET, NE_BASE + NE_EN0_ISR); /* Ack intr */ 107 } 108 109 /* Grab the 8390 specific header. Similar to the block_input routine, but 110 * we don't need to be concerned with ring wrap as the header will be at 111 * the start of a page, so we optimize accordingly. 112 */ 113 static void zorro8390_get_8390_hdr(struct net_device *dev, 114 struct e8390_pkt_hdr *hdr, int ring_page) 115 { 116 int nic_base = dev->base_addr; 117 int cnt; 118 short *ptrs; 119 120 /* This *shouldn't* happen. 121 * If it does, it's the last thing you'll see 122 */ 123 if (ei_status.dmaing) { 124 netdev_warn(dev, 125 "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n", 126 __func__, ei_status.dmaing, ei_status.irqlock); 127 return; 128 } 129 130 ei_status.dmaing |= 0x01; 131 z_writeb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD); 132 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); 133 z_writeb(sizeof(struct e8390_pkt_hdr), nic_base + NE_EN0_RCNTLO); 134 z_writeb(0, nic_base + NE_EN0_RCNTHI); 135 z_writeb(0, nic_base + NE_EN0_RSARLO); /* On page boundary */ 136 z_writeb(ring_page, nic_base + NE_EN0_RSARHI); 137 z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD); 138 139 ptrs = (short *)hdr; 140 for (cnt = 0; cnt < sizeof(struct e8390_pkt_hdr) >> 1; cnt++) 141 *ptrs++ = z_readw(NE_BASE + NE_DATAPORT); 142 143 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr */ 144 145 hdr->count = WORDSWAP(hdr->count); 146 147 ei_status.dmaing &= ~0x01; 148 } 149 150 /* Block input and output, similar to the Crynwr packet driver. 151 * If you are porting to a new ethercard, look at the packet driver source 152 * for hints. The NEx000 doesn't share the on-board packet memory -- 153 * you have to put the packet out through the "remote DMA" dataport 154 * using z_writeb. 155 */ 156 static void zorro8390_block_input(struct net_device *dev, int count, 157 struct sk_buff *skb, int ring_offset) 158 { 159 int nic_base = dev->base_addr; 160 char *buf = skb->data; 161 short *ptrs; 162 int cnt; 163 164 /* This *shouldn't* happen. 165 * If it does, it's the last thing you'll see 166 */ 167 if (ei_status.dmaing) { 168 netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n", 169 __func__, ei_status.dmaing, ei_status.irqlock); 170 return; 171 } 172 ei_status.dmaing |= 0x01; 173 z_writeb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD); 174 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); 175 z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO); 176 z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI); 177 z_writeb(ring_offset & 0xff, nic_base + NE_EN0_RSARLO); 178 z_writeb(ring_offset >> 8, nic_base + NE_EN0_RSARHI); 179 z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD); 180 ptrs = (short *)buf; 181 for (cnt = 0; cnt < count >> 1; cnt++) 182 *ptrs++ = z_readw(NE_BASE + NE_DATAPORT); 183 if (count & 0x01) 184 buf[count - 1] = z_readb(NE_BASE + NE_DATAPORT); 185 186 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr */ 187 ei_status.dmaing &= ~0x01; 188 } 189 190 static void zorro8390_block_output(struct net_device *dev, int count, 191 const unsigned char *buf, 192 const int start_page) 193 { 194 int nic_base = NE_BASE; 195 unsigned long dma_start; 196 short *ptrs; 197 int cnt; 198 199 /* Round the count up for word writes. Do we need to do this? 200 * What effect will an odd byte count have on the 8390? 201 * I should check someday. 202 */ 203 if (count & 0x01) 204 count++; 205 206 /* This *shouldn't* happen. 207 * If it does, it's the last thing you'll see 208 */ 209 if (ei_status.dmaing) { 210 netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n", 211 __func__, ei_status.dmaing, ei_status.irqlock); 212 return; 213 } 214 ei_status.dmaing |= 0x01; 215 /* We should already be in page 0, but to be safe... */ 216 z_writeb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD); 217 218 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); 219 220 /* Now the normal output. */ 221 z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO); 222 z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI); 223 z_writeb(0x00, nic_base + NE_EN0_RSARLO); 224 z_writeb(start_page, nic_base + NE_EN0_RSARHI); 225 226 z_writeb(E8390_RWRITE + E8390_START, nic_base + NE_CMD); 227 ptrs = (short *)buf; 228 for (cnt = 0; cnt < count >> 1; cnt++) 229 z_writew(*ptrs++, NE_BASE + NE_DATAPORT); 230 231 dma_start = jiffies; 232 233 while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0) 234 if (time_after(jiffies, dma_start + 2 * HZ / 100)) { 235 /* 20ms */ 236 netdev_warn(dev, "timeout waiting for Tx RDC\n"); 237 zorro8390_reset_8390(dev); 238 __NS8390_init(dev, 1); 239 break; 240 } 241 242 z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr */ 243 ei_status.dmaing &= ~0x01; 244 } 245 246 static int zorro8390_open(struct net_device *dev) 247 { 248 __ei_open(dev); 249 return 0; 250 } 251 252 static int zorro8390_close(struct net_device *dev) 253 { 254 struct ei_device *ei_local = netdev_priv(dev); 255 256 netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard\n"); 257 __ei_close(dev); 258 return 0; 259 } 260 261 static void zorro8390_remove_one(struct zorro_dev *z) 262 { 263 struct net_device *dev = zorro_get_drvdata(z); 264 265 unregister_netdev(dev); 266 free_irq(IRQ_AMIGA_PORTS, dev); 267 release_mem_region(ZTWO_PADDR(dev->base_addr), NE_IO_EXTENT * 2); 268 free_netdev(dev); 269 } 270 271 static struct zorro_device_id zorro8390_zorro_tbl[] = { 272 { ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2, }, 273 { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, }, 274 { 0 } 275 }; 276 MODULE_DEVICE_TABLE(zorro, zorro8390_zorro_tbl); 277 278 static const struct net_device_ops zorro8390_netdev_ops = { 279 .ndo_open = zorro8390_open, 280 .ndo_stop = zorro8390_close, 281 .ndo_start_xmit = __ei_start_xmit, 282 .ndo_tx_timeout = __ei_tx_timeout, 283 .ndo_get_stats = __ei_get_stats, 284 .ndo_set_rx_mode = __ei_set_multicast_list, 285 .ndo_validate_addr = eth_validate_addr, 286 .ndo_set_mac_address = eth_mac_addr, 287 .ndo_change_mtu = eth_change_mtu, 288 #ifdef CONFIG_NET_POLL_CONTROLLER 289 .ndo_poll_controller = __ei_poll, 290 #endif 291 }; 292 293 static int zorro8390_init(struct net_device *dev, unsigned long board, 294 const char *name, void __iomem *ioaddr) 295 { 296 int i; 297 int err; 298 unsigned char SA_prom[32]; 299 int start_page, stop_page; 300 struct ei_device *ei_local = netdev_priv(dev); 301 static u32 zorro8390_offsets[16] = { 302 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e, 303 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e, 304 }; 305 306 /* Reset card. Who knows what dain-bramaged state it was left in. */ 307 { 308 unsigned long reset_start_time = jiffies; 309 310 z_writeb(z_readb(ioaddr + NE_RESET), ioaddr + NE_RESET); 311 312 while ((z_readb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0) 313 if (time_after(jiffies, 314 reset_start_time + 2 * HZ / 100)) { 315 netdev_warn(dev, "not found (no reset ack)\n"); 316 return -ENODEV; 317 } 318 319 z_writeb(0xff, ioaddr + NE_EN0_ISR); /* Ack all intr. */ 320 } 321 322 /* Read the 16 bytes of station address PROM. 323 * We must first initialize registers, 324 * similar to NS8390_init(eifdev, 0). 325 * We can't reliably read the SAPROM address without this. 326 * (I learned the hard way!). 327 */ 328 { 329 static const struct { 330 u32 value; 331 u32 offset; 332 } program_seq[] = { 333 {E8390_NODMA + E8390_PAGE0 + E8390_STOP, NE_CMD}, 334 /* Select page 0 */ 335 {0x48, NE_EN0_DCFG}, /* 0x48: Set byte-wide access */ 336 {0x00, NE_EN0_RCNTLO}, /* Clear the count regs */ 337 {0x00, NE_EN0_RCNTHI}, 338 {0x00, NE_EN0_IMR}, /* Mask completion irq */ 339 {0xFF, NE_EN0_ISR}, 340 {E8390_RXOFF, NE_EN0_RXCR}, /* 0x20 Set to monitor */ 341 {E8390_TXOFF, NE_EN0_TXCR}, /* 0x02 and loopback mode */ 342 {32, NE_EN0_RCNTLO}, 343 {0x00, NE_EN0_RCNTHI}, 344 {0x00, NE_EN0_RSARLO}, /* DMA starting at 0x0000 */ 345 {0x00, NE_EN0_RSARHI}, 346 {E8390_RREAD + E8390_START, NE_CMD}, 347 }; 348 for (i = 0; i < ARRAY_SIZE(program_seq); i++) 349 z_writeb(program_seq[i].value, 350 ioaddr + program_seq[i].offset); 351 } 352 for (i = 0; i < 16; i++) { 353 SA_prom[i] = z_readb(ioaddr + NE_DATAPORT); 354 (void)z_readb(ioaddr + NE_DATAPORT); 355 } 356 357 /* We must set the 8390 for word mode. */ 358 z_writeb(0x49, ioaddr + NE_EN0_DCFG); 359 start_page = NESM_START_PG; 360 stop_page = NESM_STOP_PG; 361 362 dev->base_addr = (unsigned long)ioaddr; 363 dev->irq = IRQ_AMIGA_PORTS; 364 365 /* Install the Interrupt handler */ 366 i = request_irq(IRQ_AMIGA_PORTS, __ei_interrupt, 367 IRQF_SHARED, DRV_NAME, dev); 368 if (i) 369 return i; 370 371 for (i = 0; i < ETH_ALEN; i++) 372 dev->dev_addr[i] = SA_prom[i]; 373 374 pr_debug("Found ethernet address: %pM\n", dev->dev_addr); 375 376 ei_status.name = name; 377 ei_status.tx_start_page = start_page; 378 ei_status.stop_page = stop_page; 379 ei_status.word16 = 1; 380 381 ei_status.rx_start_page = start_page + TX_PAGES; 382 383 ei_status.reset_8390 = zorro8390_reset_8390; 384 ei_status.block_input = zorro8390_block_input; 385 ei_status.block_output = zorro8390_block_output; 386 ei_status.get_8390_hdr = zorro8390_get_8390_hdr; 387 ei_status.reg_offset = zorro8390_offsets; 388 389 dev->netdev_ops = &zorro8390_netdev_ops; 390 __NS8390_init(dev, 0); 391 392 ei_local->msg_enable = zorro8390_msg_enable; 393 394 err = register_netdev(dev); 395 if (err) { 396 free_irq(IRQ_AMIGA_PORTS, dev); 397 return err; 398 } 399 400 netdev_info(dev, "%s at 0x%08lx, Ethernet Address %pM\n", 401 name, board, dev->dev_addr); 402 403 return 0; 404 } 405 406 static int zorro8390_init_one(struct zorro_dev *z, 407 const struct zorro_device_id *ent) 408 { 409 struct net_device *dev; 410 unsigned long board, ioaddr; 411 int err, i; 412 413 for (i = ARRAY_SIZE(cards) - 1; i >= 0; i--) 414 if (z->id == cards[i].id) 415 break; 416 if (i < 0) 417 return -ENODEV; 418 419 board = z->resource.start; 420 ioaddr = board + cards[i].offset; 421 dev = ____alloc_ei_netdev(0); 422 if (!dev) 423 return -ENOMEM; 424 if (!request_mem_region(ioaddr, NE_IO_EXTENT * 2, DRV_NAME)) { 425 free_netdev(dev); 426 return -EBUSY; 427 } 428 err = zorro8390_init(dev, board, cards[i].name, ZTWO_VADDR(ioaddr)); 429 if (err) { 430 release_mem_region(ioaddr, NE_IO_EXTENT * 2); 431 free_netdev(dev); 432 return err; 433 } 434 zorro_set_drvdata(z, dev); 435 return 0; 436 } 437 438 static struct zorro_driver zorro8390_driver = { 439 .name = "zorro8390", 440 .id_table = zorro8390_zorro_tbl, 441 .probe = zorro8390_init_one, 442 .remove = zorro8390_remove_one, 443 }; 444 445 static int __init zorro8390_init_module(void) 446 { 447 return zorro_register_driver(&zorro8390_driver); 448 } 449 450 static void __exit zorro8390_cleanup_module(void) 451 { 452 zorro_unregister_driver(&zorro8390_driver); 453 } 454 455 module_init(zorro8390_init_module); 456 module_exit(zorro8390_cleanup_module); 457 458 MODULE_LICENSE("GPL"); 459