xref: /linux/drivers/net/dsa/vitesse-vsc73xx-core.c (revision 4b660dbd9ee2059850fd30e0df420ca7a38a1856)
1 // SPDX-License-Identifier: GPL-2.0
2 /* DSA driver for:
3  * Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
4  * Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
5  * Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
6  * Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
7  *
8  * These switches have a built-in 8051 CPU and can download and execute a
9  * firmware in this CPU. They can also be configured to use an external CPU
10  * handling the switch in a memory-mapped manner by connecting to that external
11  * CPU's memory bus.
12  *
13  * Copyright (C) 2018 Linus Wallej <linus.walleij@linaro.org>
14  * Includes portions of code from the firmware uploader by:
15  * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
16  */
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/device.h>
20 #include <linux/of.h>
21 #include <linux/of_mdio.h>
22 #include <linux/bitops.h>
23 #include <linux/if_bridge.h>
24 #include <linux/etherdevice.h>
25 #include <linux/gpio/consumer.h>
26 #include <linux/gpio/driver.h>
27 #include <linux/random.h>
28 #include <net/dsa.h>
29 
30 #include "vitesse-vsc73xx.h"
31 
32 #define VSC73XX_BLOCK_MAC	0x1 /* Subblocks 0-4, 6 (CPU port) */
33 #define VSC73XX_BLOCK_ANALYZER	0x2 /* Only subblock 0 */
34 #define VSC73XX_BLOCK_MII	0x3 /* Subblocks 0 and 1 */
35 #define VSC73XX_BLOCK_MEMINIT	0x3 /* Only subblock 2 */
36 #define VSC73XX_BLOCK_CAPTURE	0x4 /* Only subblock 2 */
37 #define VSC73XX_BLOCK_ARBITER	0x5 /* Only subblock 0 */
38 #define VSC73XX_BLOCK_SYSTEM	0x7 /* Only subblock 0 */
39 
40 #define CPU_PORT	6 /* CPU port */
41 
42 /* MAC Block registers */
43 #define VSC73XX_MAC_CFG		0x00
44 #define VSC73XX_MACHDXGAP	0x02
45 #define VSC73XX_FCCONF		0x04
46 #define VSC73XX_FCMACHI		0x08
47 #define VSC73XX_FCMACLO		0x0c
48 #define VSC73XX_MAXLEN		0x10
49 #define VSC73XX_ADVPORTM	0x19
50 #define VSC73XX_TXUPDCFG	0x24
51 #define VSC73XX_TXQ_SELECT_CFG	0x28
52 #define VSC73XX_RXOCT		0x50
53 #define VSC73XX_TXOCT		0x51
54 #define VSC73XX_C_RX0		0x52
55 #define VSC73XX_C_RX1		0x53
56 #define VSC73XX_C_RX2		0x54
57 #define VSC73XX_C_TX0		0x55
58 #define VSC73XX_C_TX1		0x56
59 #define VSC73XX_C_TX2		0x57
60 #define VSC73XX_C_CFG		0x58
61 #define VSC73XX_CAT_DROP	0x6e
62 #define VSC73XX_CAT_PR_MISC_L2	0x6f
63 #define VSC73XX_CAT_PR_USR_PRIO	0x75
64 #define VSC73XX_Q_MISC_CONF	0xdf
65 
66 /* MAC_CFG register bits */
67 #define VSC73XX_MAC_CFG_WEXC_DIS	BIT(31)
68 #define VSC73XX_MAC_CFG_PORT_RST	BIT(29)
69 #define VSC73XX_MAC_CFG_TX_EN		BIT(28)
70 #define VSC73XX_MAC_CFG_SEED_LOAD	BIT(27)
71 #define VSC73XX_MAC_CFG_SEED_MASK	GENMASK(26, 19)
72 #define VSC73XX_MAC_CFG_SEED_OFFSET	19
73 #define VSC73XX_MAC_CFG_FDX		BIT(18)
74 #define VSC73XX_MAC_CFG_GIGA_MODE	BIT(17)
75 #define VSC73XX_MAC_CFG_RX_EN		BIT(16)
76 #define VSC73XX_MAC_CFG_VLAN_DBLAWR	BIT(15)
77 #define VSC73XX_MAC_CFG_VLAN_AWR	BIT(14)
78 #define VSC73XX_MAC_CFG_100_BASE_T	BIT(13) /* Not in manual */
79 #define VSC73XX_MAC_CFG_TX_IPG_MASK	GENMASK(10, 6)
80 #define VSC73XX_MAC_CFG_TX_IPG_OFFSET	6
81 #define VSC73XX_MAC_CFG_TX_IPG_1000M	(6 << VSC73XX_MAC_CFG_TX_IPG_OFFSET)
82 #define VSC73XX_MAC_CFG_TX_IPG_100_10M	(17 << VSC73XX_MAC_CFG_TX_IPG_OFFSET)
83 #define VSC73XX_MAC_CFG_MAC_RX_RST	BIT(5)
84 #define VSC73XX_MAC_CFG_MAC_TX_RST	BIT(4)
85 #define VSC73XX_MAC_CFG_CLK_SEL_MASK	GENMASK(2, 0)
86 #define VSC73XX_MAC_CFG_CLK_SEL_OFFSET	0
87 #define VSC73XX_MAC_CFG_CLK_SEL_1000M	1
88 #define VSC73XX_MAC_CFG_CLK_SEL_100M	2
89 #define VSC73XX_MAC_CFG_CLK_SEL_10M	3
90 #define VSC73XX_MAC_CFG_CLK_SEL_EXT	4
91 
92 #define VSC73XX_MAC_CFG_1000M_F_PHY	(VSC73XX_MAC_CFG_FDX | \
93 					 VSC73XX_MAC_CFG_GIGA_MODE | \
94 					 VSC73XX_MAC_CFG_TX_IPG_1000M | \
95 					 VSC73XX_MAC_CFG_CLK_SEL_EXT)
96 #define VSC73XX_MAC_CFG_100_10M_F_PHY	(VSC73XX_MAC_CFG_FDX | \
97 					 VSC73XX_MAC_CFG_TX_IPG_100_10M | \
98 					 VSC73XX_MAC_CFG_CLK_SEL_EXT)
99 #define VSC73XX_MAC_CFG_100_10M_H_PHY	(VSC73XX_MAC_CFG_TX_IPG_100_10M | \
100 					 VSC73XX_MAC_CFG_CLK_SEL_EXT)
101 #define VSC73XX_MAC_CFG_1000M_F_RGMII	(VSC73XX_MAC_CFG_FDX | \
102 					 VSC73XX_MAC_CFG_GIGA_MODE | \
103 					 VSC73XX_MAC_CFG_TX_IPG_1000M | \
104 					 VSC73XX_MAC_CFG_CLK_SEL_1000M)
105 #define VSC73XX_MAC_CFG_RESET		(VSC73XX_MAC_CFG_PORT_RST | \
106 					 VSC73XX_MAC_CFG_MAC_RX_RST | \
107 					 VSC73XX_MAC_CFG_MAC_TX_RST)
108 
109 /* Flow control register bits */
110 #define VSC73XX_FCCONF_ZERO_PAUSE_EN	BIT(17)
111 #define VSC73XX_FCCONF_FLOW_CTRL_OBEY	BIT(16)
112 #define VSC73XX_FCCONF_PAUSE_VAL_MASK	GENMASK(15, 0)
113 
114 /* ADVPORTM advanced port setup register bits */
115 #define VSC73XX_ADVPORTM_IFG_PPM	BIT(7)
116 #define VSC73XX_ADVPORTM_EXC_COL_CONT	BIT(6)
117 #define VSC73XX_ADVPORTM_EXT_PORT	BIT(5)
118 #define VSC73XX_ADVPORTM_INV_GTX	BIT(4)
119 #define VSC73XX_ADVPORTM_ENA_GTX	BIT(3)
120 #define VSC73XX_ADVPORTM_DDR_MODE	BIT(2)
121 #define VSC73XX_ADVPORTM_IO_LOOPBACK	BIT(1)
122 #define VSC73XX_ADVPORTM_HOST_LOOPBACK	BIT(0)
123 
124 /* CAT_DROP categorizer frame dropping register bits */
125 #define VSC73XX_CAT_DROP_DROP_MC_SMAC_ENA	BIT(6)
126 #define VSC73XX_CAT_DROP_FWD_CTRL_ENA		BIT(4)
127 #define VSC73XX_CAT_DROP_FWD_PAUSE_ENA		BIT(3)
128 #define VSC73XX_CAT_DROP_UNTAGGED_ENA		BIT(2)
129 #define VSC73XX_CAT_DROP_TAGGED_ENA		BIT(1)
130 #define VSC73XX_CAT_DROP_NULL_MAC_ENA		BIT(0)
131 
132 #define VSC73XX_Q_MISC_CONF_EXTENT_MEM		BIT(31)
133 #define VSC73XX_Q_MISC_CONF_EARLY_TX_MASK	GENMASK(4, 1)
134 #define VSC73XX_Q_MISC_CONF_EARLY_TX_512	(1 << 1)
135 #define VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE	BIT(0)
136 
137 /* Frame analyzer block 2 registers */
138 #define VSC73XX_STORMLIMIT	0x02
139 #define VSC73XX_ADVLEARN	0x03
140 #define VSC73XX_IFLODMSK	0x04
141 #define VSC73XX_VLANMASK	0x05
142 #define VSC73XX_MACHDATA	0x06
143 #define VSC73XX_MACLDATA	0x07
144 #define VSC73XX_ANMOVED		0x08
145 #define VSC73XX_ANAGEFIL	0x09
146 #define VSC73XX_ANEVENTS	0x0a
147 #define VSC73XX_ANCNTMASK	0x0b
148 #define VSC73XX_ANCNTVAL	0x0c
149 #define VSC73XX_LEARNMASK	0x0d
150 #define VSC73XX_UFLODMASK	0x0e
151 #define VSC73XX_MFLODMASK	0x0f
152 #define VSC73XX_RECVMASK	0x10
153 #define VSC73XX_AGGRCTRL	0x20
154 #define VSC73XX_AGGRMSKS	0x30 /* Until 0x3f */
155 #define VSC73XX_DSTMASKS	0x40 /* Until 0x7f */
156 #define VSC73XX_SRCMASKS	0x80 /* Until 0x87 */
157 #define VSC73XX_CAPENAB		0xa0
158 #define VSC73XX_MACACCESS	0xb0
159 #define VSC73XX_IPMCACCESS	0xb1
160 #define VSC73XX_MACTINDX	0xc0
161 #define VSC73XX_VLANACCESS	0xd0
162 #define VSC73XX_VLANTIDX	0xe0
163 #define VSC73XX_AGENCTRL	0xf0
164 #define VSC73XX_CAPRST		0xff
165 
166 #define VSC73XX_MACACCESS_CPU_COPY		BIT(14)
167 #define VSC73XX_MACACCESS_FWD_KILL		BIT(13)
168 #define VSC73XX_MACACCESS_IGNORE_VLAN		BIT(12)
169 #define VSC73XX_MACACCESS_AGED_FLAG		BIT(11)
170 #define VSC73XX_MACACCESS_VALID			BIT(10)
171 #define VSC73XX_MACACCESS_LOCKED		BIT(9)
172 #define VSC73XX_MACACCESS_DEST_IDX_MASK		GENMASK(8, 3)
173 #define VSC73XX_MACACCESS_CMD_MASK		GENMASK(2, 0)
174 #define VSC73XX_MACACCESS_CMD_IDLE		0
175 #define VSC73XX_MACACCESS_CMD_LEARN		1
176 #define VSC73XX_MACACCESS_CMD_FORGET		2
177 #define VSC73XX_MACACCESS_CMD_AGE_TABLE		3
178 #define VSC73XX_MACACCESS_CMD_FLUSH_TABLE	4
179 #define VSC73XX_MACACCESS_CMD_CLEAR_TABLE	5
180 #define VSC73XX_MACACCESS_CMD_READ_ENTRY	6
181 #define VSC73XX_MACACCESS_CMD_WRITE_ENTRY	7
182 
183 #define VSC73XX_VLANACCESS_LEARN_DISABLED	BIT(30)
184 #define VSC73XX_VLANACCESS_VLAN_MIRROR		BIT(29)
185 #define VSC73XX_VLANACCESS_VLAN_SRC_CHECK	BIT(28)
186 #define VSC73XX_VLANACCESS_VLAN_PORT_MASK	GENMASK(9, 2)
187 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK	GENMASK(2, 0)
188 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_IDLE	0
189 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_READ_ENTRY	1
190 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_WRITE_ENTRY	2
191 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE	3
192 
193 /* MII block 3 registers */
194 #define VSC73XX_MII_STAT	0x0
195 #define VSC73XX_MII_CMD		0x1
196 #define VSC73XX_MII_DATA	0x2
197 
198 /* Arbiter block 5 registers */
199 #define VSC73XX_ARBEMPTY		0x0c
200 #define VSC73XX_ARBDISC			0x0e
201 #define VSC73XX_SBACKWDROP		0x12
202 #define VSC73XX_DBACKWDROP		0x13
203 #define VSC73XX_ARBBURSTPROB		0x15
204 
205 /* System block 7 registers */
206 #define VSC73XX_ICPU_SIPAD		0x01
207 #define VSC73XX_GMIIDELAY		0x05
208 #define VSC73XX_ICPU_CTRL		0x10
209 #define VSC73XX_ICPU_ADDR		0x11
210 #define VSC73XX_ICPU_SRAM		0x12
211 #define VSC73XX_HWSEM			0x13
212 #define VSC73XX_GLORESET		0x14
213 #define VSC73XX_ICPU_MBOX_VAL		0x15
214 #define VSC73XX_ICPU_MBOX_SET		0x16
215 #define VSC73XX_ICPU_MBOX_CLR		0x17
216 #define VSC73XX_CHIPID			0x18
217 #define VSC73XX_GPIO			0x34
218 
219 #define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_NONE	0
220 #define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_4_NS	1
221 #define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_7_NS	2
222 #define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS	3
223 
224 #define VSC73XX_GMIIDELAY_GMII0_RXDELAY_NONE	(0 << 4)
225 #define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_4_NS	(1 << 4)
226 #define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_7_NS	(2 << 4)
227 #define VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS	(3 << 4)
228 
229 #define VSC73XX_ICPU_CTRL_WATCHDOG_RST	BIT(31)
230 #define VSC73XX_ICPU_CTRL_CLK_DIV_MASK	GENMASK(12, 8)
231 #define VSC73XX_ICPU_CTRL_SRST_HOLD	BIT(7)
232 #define VSC73XX_ICPU_CTRL_ICPU_PI_EN	BIT(6)
233 #define VSC73XX_ICPU_CTRL_BOOT_EN	BIT(3)
234 #define VSC73XX_ICPU_CTRL_EXT_ACC_EN	BIT(2)
235 #define VSC73XX_ICPU_CTRL_CLK_EN	BIT(1)
236 #define VSC73XX_ICPU_CTRL_SRST		BIT(0)
237 
238 #define VSC73XX_CHIPID_ID_SHIFT		12
239 #define VSC73XX_CHIPID_ID_MASK		0xffff
240 #define VSC73XX_CHIPID_REV_SHIFT	28
241 #define VSC73XX_CHIPID_REV_MASK		0xf
242 #define VSC73XX_CHIPID_ID_7385		0x7385
243 #define VSC73XX_CHIPID_ID_7388		0x7388
244 #define VSC73XX_CHIPID_ID_7395		0x7395
245 #define VSC73XX_CHIPID_ID_7398		0x7398
246 
247 #define VSC73XX_GLORESET_STROBE		BIT(4)
248 #define VSC73XX_GLORESET_ICPU_LOCK	BIT(3)
249 #define VSC73XX_GLORESET_MEM_LOCK	BIT(2)
250 #define VSC73XX_GLORESET_PHY_RESET	BIT(1)
251 #define VSC73XX_GLORESET_MASTER_RESET	BIT(0)
252 
253 #define VSC7385_CLOCK_DELAY		((3 << 4) | 3)
254 #define VSC7385_CLOCK_DELAY_MASK	((3 << 4) | 3)
255 
256 #define VSC73XX_ICPU_CTRL_STOP	(VSC73XX_ICPU_CTRL_SRST_HOLD | \
257 				 VSC73XX_ICPU_CTRL_BOOT_EN | \
258 				 VSC73XX_ICPU_CTRL_EXT_ACC_EN)
259 
260 #define VSC73XX_ICPU_CTRL_START	(VSC73XX_ICPU_CTRL_CLK_DIV | \
261 				 VSC73XX_ICPU_CTRL_BOOT_EN | \
262 				 VSC73XX_ICPU_CTRL_CLK_EN | \
263 				 VSC73XX_ICPU_CTRL_SRST)
264 
265 #define IS_7385(a) ((a)->chipid == VSC73XX_CHIPID_ID_7385)
266 #define IS_7388(a) ((a)->chipid == VSC73XX_CHIPID_ID_7388)
267 #define IS_7395(a) ((a)->chipid == VSC73XX_CHIPID_ID_7395)
268 #define IS_7398(a) ((a)->chipid == VSC73XX_CHIPID_ID_7398)
269 #define IS_739X(a) (IS_7395(a) || IS_7398(a))
270 
271 struct vsc73xx_counter {
272 	u8 counter;
273 	const char *name;
274 };
275 
276 /* Counters are named according to the MIB standards where applicable.
277  * Some counters are custom, non-standard. The standard counters are
278  * named in accordance with RFC2819, RFC2021 and IEEE Std 802.3-2002 Annex
279  * 30A Counters.
280  */
281 static const struct vsc73xx_counter vsc73xx_rx_counters[] = {
282 	{ 0, "RxEtherStatsPkts" },
283 	{ 1, "RxBroadcast+MulticastPkts" }, /* non-standard counter */
284 	{ 2, "RxTotalErrorPackets" }, /* non-standard counter */
285 	{ 3, "RxEtherStatsBroadcastPkts" },
286 	{ 4, "RxEtherStatsMulticastPkts" },
287 	{ 5, "RxEtherStatsPkts64Octets" },
288 	{ 6, "RxEtherStatsPkts65to127Octets" },
289 	{ 7, "RxEtherStatsPkts128to255Octets" },
290 	{ 8, "RxEtherStatsPkts256to511Octets" },
291 	{ 9, "RxEtherStatsPkts512to1023Octets" },
292 	{ 10, "RxEtherStatsPkts1024to1518Octets" },
293 	{ 11, "RxJumboFrames" }, /* non-standard counter */
294 	{ 12, "RxaPauseMACControlFramesTransmitted" },
295 	{ 13, "RxFIFODrops" }, /* non-standard counter */
296 	{ 14, "RxBackwardDrops" }, /* non-standard counter */
297 	{ 15, "RxClassifierDrops" }, /* non-standard counter */
298 	{ 16, "RxEtherStatsCRCAlignErrors" },
299 	{ 17, "RxEtherStatsUndersizePkts" },
300 	{ 18, "RxEtherStatsOversizePkts" },
301 	{ 19, "RxEtherStatsFragments" },
302 	{ 20, "RxEtherStatsJabbers" },
303 	{ 21, "RxaMACControlFramesReceived" },
304 	/* 22-24 are undefined */
305 	{ 25, "RxaFramesReceivedOK" },
306 	{ 26, "RxQoSClass0" }, /* non-standard counter */
307 	{ 27, "RxQoSClass1" }, /* non-standard counter */
308 	{ 28, "RxQoSClass2" }, /* non-standard counter */
309 	{ 29, "RxQoSClass3" }, /* non-standard counter */
310 };
311 
312 static const struct vsc73xx_counter vsc73xx_tx_counters[] = {
313 	{ 0, "TxEtherStatsPkts" },
314 	{ 1, "TxBroadcast+MulticastPkts" }, /* non-standard counter */
315 	{ 2, "TxTotalErrorPackets" }, /* non-standard counter */
316 	{ 3, "TxEtherStatsBroadcastPkts" },
317 	{ 4, "TxEtherStatsMulticastPkts" },
318 	{ 5, "TxEtherStatsPkts64Octets" },
319 	{ 6, "TxEtherStatsPkts65to127Octets" },
320 	{ 7, "TxEtherStatsPkts128to255Octets" },
321 	{ 8, "TxEtherStatsPkts256to511Octets" },
322 	{ 9, "TxEtherStatsPkts512to1023Octets" },
323 	{ 10, "TxEtherStatsPkts1024to1518Octets" },
324 	{ 11, "TxJumboFrames" }, /* non-standard counter */
325 	{ 12, "TxaPauseMACControlFramesTransmitted" },
326 	{ 13, "TxFIFODrops" }, /* non-standard counter */
327 	{ 14, "TxDrops" }, /* non-standard counter */
328 	{ 15, "TxEtherStatsCollisions" },
329 	{ 16, "TxEtherStatsCRCAlignErrors" },
330 	{ 17, "TxEtherStatsUndersizePkts" },
331 	{ 18, "TxEtherStatsOversizePkts" },
332 	{ 19, "TxEtherStatsFragments" },
333 	{ 20, "TxEtherStatsJabbers" },
334 	/* 21-24 are undefined */
335 	{ 25, "TxaFramesReceivedOK" },
336 	{ 26, "TxQoSClass0" }, /* non-standard counter */
337 	{ 27, "TxQoSClass1" }, /* non-standard counter */
338 	{ 28, "TxQoSClass2" }, /* non-standard counter */
339 	{ 29, "TxQoSClass3" }, /* non-standard counter */
340 };
341 
342 int vsc73xx_is_addr_valid(u8 block, u8 subblock)
343 {
344 	switch (block) {
345 	case VSC73XX_BLOCK_MAC:
346 		switch (subblock) {
347 		case 0 ... 4:
348 		case 6:
349 			return 1;
350 		}
351 		break;
352 
353 	case VSC73XX_BLOCK_ANALYZER:
354 	case VSC73XX_BLOCK_SYSTEM:
355 		switch (subblock) {
356 		case 0:
357 			return 1;
358 		}
359 		break;
360 
361 	case VSC73XX_BLOCK_MII:
362 	case VSC73XX_BLOCK_CAPTURE:
363 	case VSC73XX_BLOCK_ARBITER:
364 		switch (subblock) {
365 		case 0 ... 1:
366 			return 1;
367 		}
368 		break;
369 	}
370 
371 	return 0;
372 }
373 EXPORT_SYMBOL(vsc73xx_is_addr_valid);
374 
375 static int vsc73xx_read(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
376 			u32 *val)
377 {
378 	return vsc->ops->read(vsc, block, subblock, reg, val);
379 }
380 
381 static int vsc73xx_write(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
382 			 u32 val)
383 {
384 	return vsc->ops->write(vsc, block, subblock, reg, val);
385 }
386 
387 static int vsc73xx_update_bits(struct vsc73xx *vsc, u8 block, u8 subblock,
388 			       u8 reg, u32 mask, u32 val)
389 {
390 	u32 tmp, orig;
391 	int ret;
392 
393 	/* Same read-modify-write algorithm as e.g. regmap */
394 	ret = vsc73xx_read(vsc, block, subblock, reg, &orig);
395 	if (ret)
396 		return ret;
397 	tmp = orig & ~mask;
398 	tmp |= val & mask;
399 	return vsc73xx_write(vsc, block, subblock, reg, tmp);
400 }
401 
402 static int vsc73xx_detect(struct vsc73xx *vsc)
403 {
404 	bool icpu_si_boot_en;
405 	bool icpu_pi_en;
406 	u32 val;
407 	u32 rev;
408 	int ret;
409 	u32 id;
410 
411 	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
412 			   VSC73XX_ICPU_MBOX_VAL, &val);
413 	if (ret) {
414 		dev_err(vsc->dev, "unable to read mailbox (%d)\n", ret);
415 		return ret;
416 	}
417 
418 	if (val == 0xffffffff) {
419 		dev_info(vsc->dev, "chip seems dead.\n");
420 		return -EAGAIN;
421 	}
422 
423 	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
424 			   VSC73XX_CHIPID, &val);
425 	if (ret) {
426 		dev_err(vsc->dev, "unable to read chip id (%d)\n", ret);
427 		return ret;
428 	}
429 
430 	id = (val >> VSC73XX_CHIPID_ID_SHIFT) &
431 		VSC73XX_CHIPID_ID_MASK;
432 	switch (id) {
433 	case VSC73XX_CHIPID_ID_7385:
434 	case VSC73XX_CHIPID_ID_7388:
435 	case VSC73XX_CHIPID_ID_7395:
436 	case VSC73XX_CHIPID_ID_7398:
437 		break;
438 	default:
439 		dev_err(vsc->dev, "unsupported chip, id=%04x\n", id);
440 		return -ENODEV;
441 	}
442 
443 	vsc->chipid = id;
444 	rev = (val >> VSC73XX_CHIPID_REV_SHIFT) &
445 		VSC73XX_CHIPID_REV_MASK;
446 	dev_info(vsc->dev, "VSC%04X (rev: %d) switch found\n", id, rev);
447 
448 	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
449 			   VSC73XX_ICPU_CTRL, &val);
450 	if (ret) {
451 		dev_err(vsc->dev, "unable to read iCPU control\n");
452 		return ret;
453 	}
454 
455 	/* The iCPU can always be used but can boot in different ways.
456 	 * If it is initially disabled and has no external memory,
457 	 * we are in control and can do whatever we like, else we
458 	 * are probably in trouble (we need some way to communicate
459 	 * with the running firmware) so we bail out for now.
460 	 */
461 	icpu_pi_en = !!(val & VSC73XX_ICPU_CTRL_ICPU_PI_EN);
462 	icpu_si_boot_en = !!(val & VSC73XX_ICPU_CTRL_BOOT_EN);
463 	if (icpu_si_boot_en && icpu_pi_en) {
464 		dev_err(vsc->dev,
465 			"iCPU enabled boots from SI, has external memory\n");
466 		dev_err(vsc->dev, "no idea how to deal with this\n");
467 		return -ENODEV;
468 	}
469 	if (icpu_si_boot_en && !icpu_pi_en) {
470 		dev_err(vsc->dev,
471 			"iCPU enabled boots from PI/SI, no external memory\n");
472 		return -EAGAIN;
473 	}
474 	if (!icpu_si_boot_en && icpu_pi_en) {
475 		dev_err(vsc->dev,
476 			"iCPU enabled, boots from PI external memory\n");
477 		dev_err(vsc->dev, "no idea how to deal with this\n");
478 		return -ENODEV;
479 	}
480 	/* !icpu_si_boot_en && !cpu_pi_en */
481 	dev_info(vsc->dev, "iCPU disabled, no external memory\n");
482 
483 	return 0;
484 }
485 
486 static int vsc73xx_phy_read(struct dsa_switch *ds, int phy, int regnum)
487 {
488 	struct vsc73xx *vsc = ds->priv;
489 	u32 cmd;
490 	u32 val;
491 	int ret;
492 
493 	/* Setting bit 26 means "read" */
494 	cmd = BIT(26) | (phy << 21) | (regnum << 16);
495 	ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd);
496 	if (ret)
497 		return ret;
498 	msleep(2);
499 	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MII, 0, 2, &val);
500 	if (ret)
501 		return ret;
502 	if (val & BIT(16)) {
503 		dev_err(vsc->dev, "reading reg %02x from phy%d failed\n",
504 			regnum, phy);
505 		return -EIO;
506 	}
507 	val &= 0xFFFFU;
508 
509 	dev_dbg(vsc->dev, "read reg %02x from phy%d = %04x\n",
510 		regnum, phy, val);
511 
512 	return val;
513 }
514 
515 static int vsc73xx_phy_write(struct dsa_switch *ds, int phy, int regnum,
516 			     u16 val)
517 {
518 	struct vsc73xx *vsc = ds->priv;
519 	u32 cmd;
520 	int ret;
521 
522 	/* It was found through tedious experiments that this router
523 	 * chip really hates to have it's PHYs reset. They
524 	 * never recover if that happens: autonegotiation stops
525 	 * working after a reset. Just filter out this command.
526 	 * (Resetting the whole chip is OK.)
527 	 */
528 	if (regnum == 0 && (val & BIT(15))) {
529 		dev_info(vsc->dev, "reset PHY - disallowed\n");
530 		return 0;
531 	}
532 
533 	cmd = (phy << 21) | (regnum << 16);
534 	ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd);
535 	if (ret)
536 		return ret;
537 
538 	dev_dbg(vsc->dev, "write %04x to reg %02x in phy%d\n",
539 		val, regnum, phy);
540 	return 0;
541 }
542 
543 static enum dsa_tag_protocol vsc73xx_get_tag_protocol(struct dsa_switch *ds,
544 						      int port,
545 						      enum dsa_tag_protocol mp)
546 {
547 	/* The switch internally uses a 8 byte header with length,
548 	 * source port, tag, LPA and priority. This is supposedly
549 	 * only accessible when operating the switch using the internal
550 	 * CPU or with an external CPU mapping the device in, but not
551 	 * when operating the switch over SPI and putting frames in/out
552 	 * on port 6 (the CPU port). So far we must assume that we
553 	 * cannot access the tag. (See "Internal frame header" section
554 	 * 3.9.1 in the manual.)
555 	 */
556 	return DSA_TAG_PROTO_NONE;
557 }
558 
559 static int vsc73xx_setup(struct dsa_switch *ds)
560 {
561 	struct vsc73xx *vsc = ds->priv;
562 	int i;
563 
564 	dev_info(vsc->dev, "set up the switch\n");
565 
566 	/* Issue RESET */
567 	vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
568 		      VSC73XX_GLORESET_MASTER_RESET);
569 	usleep_range(125, 200);
570 
571 	/* Initialize memory, initialize RAM bank 0..15 except 6 and 7
572 	 * This sequence appears in the
573 	 * VSC7385 SparX-G5 datasheet section 6.6.1
574 	 * VSC7395 SparX-G5e datasheet section 6.6.1
575 	 * "initialization sequence".
576 	 * No explanation is given to the 0x1010400 magic number.
577 	 */
578 	for (i = 0; i <= 15; i++) {
579 		if (i != 6 && i != 7) {
580 			vsc73xx_write(vsc, VSC73XX_BLOCK_MEMINIT,
581 				      2,
582 				      0, 0x1010400 + i);
583 			mdelay(1);
584 		}
585 	}
586 	mdelay(30);
587 
588 	/* Clear MAC table */
589 	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
590 		      VSC73XX_MACACCESS,
591 		      VSC73XX_MACACCESS_CMD_CLEAR_TABLE);
592 
593 	/* Clear VLAN table */
594 	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
595 		      VSC73XX_VLANACCESS,
596 		      VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE);
597 
598 	msleep(40);
599 
600 	/* Use 20KiB buffers on all ports on VSC7395
601 	 * The VSC7385 has 16KiB buffers and that is the
602 	 * default if we don't set this up explicitly.
603 	 * Port "31" is "all ports".
604 	 */
605 	if (IS_739X(vsc))
606 		vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 0x1f,
607 			      VSC73XX_Q_MISC_CONF,
608 			      VSC73XX_Q_MISC_CONF_EXTENT_MEM);
609 
610 	/* Put all ports into reset until enabled */
611 	for (i = 0; i < 7; i++) {
612 		if (i == 5)
613 			continue;
614 		vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 4,
615 			      VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET);
616 	}
617 
618 	/* MII delay, set both GTX and RX delay to 2 ns */
619 	vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY,
620 		      VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS |
621 		      VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS);
622 	/* Enable reception of frames on all ports */
623 	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_RECVMASK,
624 		      0x5f);
625 	/* IP multicast flood mask (table 144) */
626 	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK,
627 		      0xff);
628 
629 	mdelay(50);
630 
631 	/* Release reset from the internal PHYs */
632 	vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
633 		      VSC73XX_GLORESET_PHY_RESET);
634 
635 	udelay(4);
636 
637 	return 0;
638 }
639 
640 static void vsc73xx_init_port(struct vsc73xx *vsc, int port)
641 {
642 	u32 val;
643 
644 	/* MAC configure, first reset the port and then write defaults */
645 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
646 		      port,
647 		      VSC73XX_MAC_CFG,
648 		      VSC73XX_MAC_CFG_RESET);
649 
650 	/* Take up the port in 1Gbit mode by default, this will be
651 	 * augmented after auto-negotiation on the PHY-facing
652 	 * ports.
653 	 */
654 	if (port == CPU_PORT)
655 		val = VSC73XX_MAC_CFG_1000M_F_RGMII;
656 	else
657 		val = VSC73XX_MAC_CFG_1000M_F_PHY;
658 
659 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
660 		      port,
661 		      VSC73XX_MAC_CFG,
662 		      val |
663 		      VSC73XX_MAC_CFG_TX_EN |
664 		      VSC73XX_MAC_CFG_RX_EN);
665 
666 	/* Flow control for the CPU port:
667 	 * Use a zero delay pause frame when pause condition is left
668 	 * Obey pause control frames
669 	 */
670 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
671 		      port,
672 		      VSC73XX_FCCONF,
673 		      VSC73XX_FCCONF_ZERO_PAUSE_EN |
674 		      VSC73XX_FCCONF_FLOW_CTRL_OBEY);
675 
676 	/* Issue pause control frames on PHY facing ports.
677 	 * Allow early initiation of MAC transmission if the amount
678 	 * of egress data is below 512 bytes on CPU port.
679 	 * FIXME: enable 20KiB buffers?
680 	 */
681 	if (port == CPU_PORT)
682 		val = VSC73XX_Q_MISC_CONF_EARLY_TX_512;
683 	else
684 		val = VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE;
685 	val |= VSC73XX_Q_MISC_CONF_EXTENT_MEM;
686 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
687 		      port,
688 		      VSC73XX_Q_MISC_CONF,
689 		      val);
690 
691 	/* Flow control MAC: a MAC address used in flow control frames */
692 	val = (vsc->addr[5] << 16) | (vsc->addr[4] << 8) | (vsc->addr[3]);
693 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
694 		      port,
695 		      VSC73XX_FCMACHI,
696 		      val);
697 	val = (vsc->addr[2] << 16) | (vsc->addr[1] << 8) | (vsc->addr[0]);
698 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
699 		      port,
700 		      VSC73XX_FCMACLO,
701 		      val);
702 
703 	/* Tell the categorizer to forward pause frames, not control
704 	 * frame. Do not drop anything.
705 	 */
706 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
707 		      port,
708 		      VSC73XX_CAT_DROP,
709 		      VSC73XX_CAT_DROP_FWD_PAUSE_ENA);
710 
711 	/* Clear all counters */
712 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
713 		      port, VSC73XX_C_RX0, 0);
714 }
715 
716 static void vsc73xx_adjust_enable_port(struct vsc73xx *vsc,
717 				       int port, struct phy_device *phydev,
718 				       u32 initval)
719 {
720 	u32 val = initval;
721 	u8 seed;
722 
723 	/* Reset this port FIXME: break out subroutine */
724 	val |= VSC73XX_MAC_CFG_RESET;
725 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
726 
727 	/* Seed the port randomness with randomness */
728 	get_random_bytes(&seed, 1);
729 	val |= seed << VSC73XX_MAC_CFG_SEED_OFFSET;
730 	val |= VSC73XX_MAC_CFG_SEED_LOAD;
731 	val |= VSC73XX_MAC_CFG_WEXC_DIS;
732 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
733 
734 	/* Flow control for the PHY facing ports:
735 	 * Use a zero delay pause frame when pause condition is left
736 	 * Obey pause control frames
737 	 * When generating pause frames, use 0xff as pause value
738 	 */
739 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_FCCONF,
740 		      VSC73XX_FCCONF_ZERO_PAUSE_EN |
741 		      VSC73XX_FCCONF_FLOW_CTRL_OBEY |
742 		      0xff);
743 
744 	/* Disallow backward dropping of frames from this port */
745 	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
746 			    VSC73XX_SBACKWDROP, BIT(port), 0);
747 
748 	/* Enable TX, RX, deassert reset, stop loading seed */
749 	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
750 			    VSC73XX_MAC_CFG,
751 			    VSC73XX_MAC_CFG_RESET | VSC73XX_MAC_CFG_SEED_LOAD |
752 			    VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN,
753 			    VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN);
754 }
755 
756 static void vsc73xx_adjust_link(struct dsa_switch *ds, int port,
757 				struct phy_device *phydev)
758 {
759 	struct vsc73xx *vsc = ds->priv;
760 	u32 val;
761 
762 	/* Special handling of the CPU-facing port */
763 	if (port == CPU_PORT) {
764 		/* Other ports are already initialized but not this one */
765 		vsc73xx_init_port(vsc, CPU_PORT);
766 		/* Select the external port for this interface (EXT_PORT)
767 		 * Enable the GMII GTX external clock
768 		 * Use double data rate (DDR mode)
769 		 */
770 		vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
771 			      CPU_PORT,
772 			      VSC73XX_ADVPORTM,
773 			      VSC73XX_ADVPORTM_EXT_PORT |
774 			      VSC73XX_ADVPORTM_ENA_GTX |
775 			      VSC73XX_ADVPORTM_DDR_MODE);
776 	}
777 
778 	/* This is the MAC confiuration that always need to happen
779 	 * after a PHY or the CPU port comes up or down.
780 	 */
781 	if (!phydev->link) {
782 		int maxloop = 10;
783 
784 		dev_dbg(vsc->dev, "port %d: went down\n",
785 			port);
786 
787 		/* Disable RX on this port */
788 		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
789 				    VSC73XX_MAC_CFG,
790 				    VSC73XX_MAC_CFG_RX_EN, 0);
791 
792 		/* Discard packets */
793 		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
794 				    VSC73XX_ARBDISC, BIT(port), BIT(port));
795 
796 		/* Wait until queue is empty */
797 		vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0,
798 			     VSC73XX_ARBEMPTY, &val);
799 		while (!(val & BIT(port))) {
800 			msleep(1);
801 			vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0,
802 				     VSC73XX_ARBEMPTY, &val);
803 			if (--maxloop == 0) {
804 				dev_err(vsc->dev,
805 					"timeout waiting for block arbiter\n");
806 				/* Continue anyway */
807 				break;
808 			}
809 		}
810 
811 		/* Put this port into reset */
812 		vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG,
813 			      VSC73XX_MAC_CFG_RESET);
814 
815 		/* Accept packets again */
816 		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
817 				    VSC73XX_ARBDISC, BIT(port), 0);
818 
819 		/* Allow backward dropping of frames from this port */
820 		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
821 				    VSC73XX_SBACKWDROP, BIT(port), BIT(port));
822 
823 		/* Receive mask (disable forwarding) */
824 		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
825 				    VSC73XX_RECVMASK, BIT(port), 0);
826 
827 		return;
828 	}
829 
830 	/* Figure out what speed was negotiated */
831 	if (phydev->speed == SPEED_1000) {
832 		dev_dbg(vsc->dev, "port %d: 1000 Mbit mode full duplex\n",
833 			port);
834 
835 		/* Set up default for internal port or external RGMII */
836 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
837 			val = VSC73XX_MAC_CFG_1000M_F_RGMII;
838 		else
839 			val = VSC73XX_MAC_CFG_1000M_F_PHY;
840 		vsc73xx_adjust_enable_port(vsc, port, phydev, val);
841 	} else if (phydev->speed == SPEED_100) {
842 		if (phydev->duplex == DUPLEX_FULL) {
843 			val = VSC73XX_MAC_CFG_100_10M_F_PHY;
844 			dev_dbg(vsc->dev,
845 				"port %d: 100 Mbit full duplex mode\n",
846 				port);
847 		} else {
848 			val = VSC73XX_MAC_CFG_100_10M_H_PHY;
849 			dev_dbg(vsc->dev,
850 				"port %d: 100 Mbit half duplex mode\n",
851 				port);
852 		}
853 		vsc73xx_adjust_enable_port(vsc, port, phydev, val);
854 	} else if (phydev->speed == SPEED_10) {
855 		if (phydev->duplex == DUPLEX_FULL) {
856 			val = VSC73XX_MAC_CFG_100_10M_F_PHY;
857 			dev_dbg(vsc->dev,
858 				"port %d: 10 Mbit full duplex mode\n",
859 				port);
860 		} else {
861 			val = VSC73XX_MAC_CFG_100_10M_H_PHY;
862 			dev_dbg(vsc->dev,
863 				"port %d: 10 Mbit half duplex mode\n",
864 				port);
865 		}
866 		vsc73xx_adjust_enable_port(vsc, port, phydev, val);
867 	} else {
868 		dev_err(vsc->dev,
869 			"could not adjust link: unknown speed\n");
870 	}
871 
872 	/* Enable port (forwarding) in the receieve mask */
873 	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
874 			    VSC73XX_RECVMASK, BIT(port), BIT(port));
875 }
876 
877 static int vsc73xx_port_enable(struct dsa_switch *ds, int port,
878 			       struct phy_device *phy)
879 {
880 	struct vsc73xx *vsc = ds->priv;
881 
882 	dev_info(vsc->dev, "enable port %d\n", port);
883 	vsc73xx_init_port(vsc, port);
884 
885 	return 0;
886 }
887 
888 static void vsc73xx_port_disable(struct dsa_switch *ds, int port)
889 {
890 	struct vsc73xx *vsc = ds->priv;
891 
892 	/* Just put the port into reset */
893 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port,
894 		      VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET);
895 }
896 
897 static const struct vsc73xx_counter *
898 vsc73xx_find_counter(struct vsc73xx *vsc,
899 		     u8 counter,
900 		     bool tx)
901 {
902 	const struct vsc73xx_counter *cnts;
903 	int num_cnts;
904 	int i;
905 
906 	if (tx) {
907 		cnts = vsc73xx_tx_counters;
908 		num_cnts = ARRAY_SIZE(vsc73xx_tx_counters);
909 	} else {
910 		cnts = vsc73xx_rx_counters;
911 		num_cnts = ARRAY_SIZE(vsc73xx_rx_counters);
912 	}
913 
914 	for (i = 0; i < num_cnts; i++) {
915 		const struct vsc73xx_counter *cnt;
916 
917 		cnt = &cnts[i];
918 		if (cnt->counter == counter)
919 			return cnt;
920 	}
921 
922 	return NULL;
923 }
924 
925 static void vsc73xx_get_strings(struct dsa_switch *ds, int port, u32 stringset,
926 				uint8_t *data)
927 {
928 	const struct vsc73xx_counter *cnt;
929 	struct vsc73xx *vsc = ds->priv;
930 	u8 indices[6];
931 	u8 *buf = data;
932 	int i;
933 	u32 val;
934 	int ret;
935 
936 	if (stringset != ETH_SS_STATS)
937 		return;
938 
939 	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port,
940 			   VSC73XX_C_CFG, &val);
941 	if (ret)
942 		return;
943 
944 	indices[0] = (val & 0x1f); /* RX counter 0 */
945 	indices[1] = ((val >> 5) & 0x1f); /* RX counter 1 */
946 	indices[2] = ((val >> 10) & 0x1f); /* RX counter 2 */
947 	indices[3] = ((val >> 16) & 0x1f); /* TX counter 0 */
948 	indices[4] = ((val >> 21) & 0x1f); /* TX counter 1 */
949 	indices[5] = ((val >> 26) & 0x1f); /* TX counter 2 */
950 
951 	/* The first counters is the RX octets */
952 	ethtool_puts(&buf, "RxEtherStatsOctets");
953 
954 	/* Each port supports recording 3 RX counters and 3 TX counters,
955 	 * figure out what counters we use in this set-up and return the
956 	 * names of them. The hardware default counters will be number of
957 	 * packets on RX/TX, combined broadcast+multicast packets RX/TX and
958 	 * total error packets RX/TX.
959 	 */
960 	for (i = 0; i < 3; i++) {
961 		cnt = vsc73xx_find_counter(vsc, indices[i], false);
962 		ethtool_puts(&buf, cnt ? cnt->name : "");
963 	}
964 
965 	/* TX stats begins with the number of TX octets */
966 	ethtool_puts(&buf, "TxEtherStatsOctets");
967 
968 	for (i = 3; i < 6; i++) {
969 		cnt = vsc73xx_find_counter(vsc, indices[i], true);
970 		ethtool_puts(&buf, cnt ? cnt->name : "");
971 
972 	}
973 }
974 
975 static int vsc73xx_get_sset_count(struct dsa_switch *ds, int port, int sset)
976 {
977 	/* We only support SS_STATS */
978 	if (sset != ETH_SS_STATS)
979 		return 0;
980 	/* RX and TX packets, then 3 RX counters, 3 TX counters */
981 	return 8;
982 }
983 
984 static void vsc73xx_get_ethtool_stats(struct dsa_switch *ds, int port,
985 				      uint64_t *data)
986 {
987 	struct vsc73xx *vsc = ds->priv;
988 	u8 regs[] = {
989 		VSC73XX_RXOCT,
990 		VSC73XX_C_RX0,
991 		VSC73XX_C_RX1,
992 		VSC73XX_C_RX2,
993 		VSC73XX_TXOCT,
994 		VSC73XX_C_TX0,
995 		VSC73XX_C_TX1,
996 		VSC73XX_C_TX2,
997 	};
998 	u32 val;
999 	int ret;
1000 	int i;
1001 
1002 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
1003 		ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port,
1004 				   regs[i], &val);
1005 		if (ret) {
1006 			dev_err(vsc->dev, "error reading counter %d\n", i);
1007 			return;
1008 		}
1009 		data[i] = val;
1010 	}
1011 }
1012 
1013 static int vsc73xx_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
1014 {
1015 	struct vsc73xx *vsc = ds->priv;
1016 
1017 	return vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port,
1018 			     VSC73XX_MAXLEN, new_mtu + ETH_HLEN + ETH_FCS_LEN);
1019 }
1020 
1021 /* According to application not "VSC7398 Jumbo Frames" setting
1022  * up the frame size to 9.6 KB does not affect the performance on standard
1023  * frames. It is clear from the application note that
1024  * "9.6 kilobytes" == 9600 bytes.
1025  */
1026 static int vsc73xx_get_max_mtu(struct dsa_switch *ds, int port)
1027 {
1028 	return 9600 - ETH_HLEN - ETH_FCS_LEN;
1029 }
1030 
1031 static void vsc73xx_phylink_get_caps(struct dsa_switch *dsa, int port,
1032 				     struct phylink_config *config)
1033 {
1034 	unsigned long *interfaces = config->supported_interfaces;
1035 
1036 	if (port == 5)
1037 		return;
1038 
1039 	if (port == CPU_PORT) {
1040 		__set_bit(PHY_INTERFACE_MODE_MII, interfaces);
1041 		__set_bit(PHY_INTERFACE_MODE_REVMII, interfaces);
1042 		__set_bit(PHY_INTERFACE_MODE_GMII, interfaces);
1043 		__set_bit(PHY_INTERFACE_MODE_RGMII, interfaces);
1044 	}
1045 
1046 	if (port <= 4) {
1047 		/* Internal PHYs */
1048 		__set_bit(PHY_INTERFACE_MODE_INTERNAL, interfaces);
1049 		/* phylib default */
1050 		__set_bit(PHY_INTERFACE_MODE_GMII, interfaces);
1051 	}
1052 
1053 	config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000;
1054 }
1055 
1056 static const struct dsa_switch_ops vsc73xx_ds_ops = {
1057 	.get_tag_protocol = vsc73xx_get_tag_protocol,
1058 	.setup = vsc73xx_setup,
1059 	.phy_read = vsc73xx_phy_read,
1060 	.phy_write = vsc73xx_phy_write,
1061 	.adjust_link = vsc73xx_adjust_link,
1062 	.get_strings = vsc73xx_get_strings,
1063 	.get_ethtool_stats = vsc73xx_get_ethtool_stats,
1064 	.get_sset_count = vsc73xx_get_sset_count,
1065 	.port_enable = vsc73xx_port_enable,
1066 	.port_disable = vsc73xx_port_disable,
1067 	.port_change_mtu = vsc73xx_change_mtu,
1068 	.port_max_mtu = vsc73xx_get_max_mtu,
1069 	.phylink_get_caps = vsc73xx_phylink_get_caps,
1070 };
1071 
1072 static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
1073 {
1074 	struct vsc73xx *vsc = gpiochip_get_data(chip);
1075 	u32 val;
1076 	int ret;
1077 
1078 	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
1079 			   VSC73XX_GPIO, &val);
1080 	if (ret)
1081 		return ret;
1082 
1083 	return !!(val & BIT(offset));
1084 }
1085 
1086 static void vsc73xx_gpio_set(struct gpio_chip *chip, unsigned int offset,
1087 			     int val)
1088 {
1089 	struct vsc73xx *vsc = gpiochip_get_data(chip);
1090 	u32 tmp = val ? BIT(offset) : 0;
1091 
1092 	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
1093 			    VSC73XX_GPIO, BIT(offset), tmp);
1094 }
1095 
1096 static int vsc73xx_gpio_direction_output(struct gpio_chip *chip,
1097 					 unsigned int offset, int val)
1098 {
1099 	struct vsc73xx *vsc = gpiochip_get_data(chip);
1100 	u32 tmp = val ? BIT(offset) : 0;
1101 
1102 	return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
1103 				   VSC73XX_GPIO, BIT(offset + 4) | BIT(offset),
1104 				   BIT(offset + 4) | tmp);
1105 }
1106 
1107 static int vsc73xx_gpio_direction_input(struct gpio_chip *chip,
1108 					unsigned int offset)
1109 {
1110 	struct vsc73xx *vsc = gpiochip_get_data(chip);
1111 
1112 	return  vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
1113 				    VSC73XX_GPIO, BIT(offset + 4),
1114 				    0);
1115 }
1116 
1117 static int vsc73xx_gpio_get_direction(struct gpio_chip *chip,
1118 				      unsigned int offset)
1119 {
1120 	struct vsc73xx *vsc = gpiochip_get_data(chip);
1121 	u32 val;
1122 	int ret;
1123 
1124 	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
1125 			   VSC73XX_GPIO, &val);
1126 	if (ret)
1127 		return ret;
1128 
1129 	return !(val & BIT(offset + 4));
1130 }
1131 
1132 static int vsc73xx_gpio_probe(struct vsc73xx *vsc)
1133 {
1134 	int ret;
1135 
1136 	vsc->gc.label = devm_kasprintf(vsc->dev, GFP_KERNEL, "VSC%04x",
1137 				       vsc->chipid);
1138 	if (!vsc->gc.label)
1139 		return -ENOMEM;
1140 	vsc->gc.ngpio = 4;
1141 	vsc->gc.owner = THIS_MODULE;
1142 	vsc->gc.parent = vsc->dev;
1143 	vsc->gc.base = -1;
1144 	vsc->gc.get = vsc73xx_gpio_get;
1145 	vsc->gc.set = vsc73xx_gpio_set;
1146 	vsc->gc.direction_input = vsc73xx_gpio_direction_input;
1147 	vsc->gc.direction_output = vsc73xx_gpio_direction_output;
1148 	vsc->gc.get_direction = vsc73xx_gpio_get_direction;
1149 	vsc->gc.can_sleep = true;
1150 	ret = devm_gpiochip_add_data(vsc->dev, &vsc->gc, vsc);
1151 	if (ret) {
1152 		dev_err(vsc->dev, "unable to register GPIO chip\n");
1153 		return ret;
1154 	}
1155 	return 0;
1156 }
1157 
1158 int vsc73xx_probe(struct vsc73xx *vsc)
1159 {
1160 	struct device *dev = vsc->dev;
1161 	int ret;
1162 
1163 	/* Release reset, if any */
1164 	vsc->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
1165 	if (IS_ERR(vsc->reset)) {
1166 		dev_err(dev, "failed to get RESET GPIO\n");
1167 		return PTR_ERR(vsc->reset);
1168 	}
1169 	if (vsc->reset)
1170 		/* Wait 20ms according to datasheet table 245 */
1171 		msleep(20);
1172 
1173 	ret = vsc73xx_detect(vsc);
1174 	if (ret == -EAGAIN) {
1175 		dev_err(vsc->dev,
1176 			"Chip seems to be out of control. Assert reset and try again.\n");
1177 		gpiod_set_value_cansleep(vsc->reset, 1);
1178 		/* Reset pulse should be 20ns minimum, according to datasheet
1179 		 * table 245, so 10us should be fine
1180 		 */
1181 		usleep_range(10, 100);
1182 		gpiod_set_value_cansleep(vsc->reset, 0);
1183 		/* Wait 20ms according to datasheet table 245 */
1184 		msleep(20);
1185 		ret = vsc73xx_detect(vsc);
1186 	}
1187 	if (ret) {
1188 		dev_err(dev, "no chip found (%d)\n", ret);
1189 		return -ENODEV;
1190 	}
1191 
1192 	eth_random_addr(vsc->addr);
1193 	dev_info(vsc->dev,
1194 		 "MAC for control frames: %02X:%02X:%02X:%02X:%02X:%02X\n",
1195 		 vsc->addr[0], vsc->addr[1], vsc->addr[2],
1196 		 vsc->addr[3], vsc->addr[4], vsc->addr[5]);
1197 
1198 	/* The VSC7395 switch chips have 5+1 ports which means 5
1199 	 * ordinary ports and a sixth CPU port facing the processor
1200 	 * with an RGMII interface. These ports are numbered 0..4
1201 	 * and 6, so they leave a "hole" in the port map for port 5,
1202 	 * which is invalid.
1203 	 *
1204 	 * The VSC7398 has 8 ports, port 7 is again the CPU port.
1205 	 *
1206 	 * We allocate 8 ports and avoid access to the nonexistant
1207 	 * ports.
1208 	 */
1209 	vsc->ds = devm_kzalloc(dev, sizeof(*vsc->ds), GFP_KERNEL);
1210 	if (!vsc->ds)
1211 		return -ENOMEM;
1212 
1213 	vsc->ds->dev = dev;
1214 	vsc->ds->num_ports = 8;
1215 	vsc->ds->priv = vsc;
1216 
1217 	vsc->ds->ops = &vsc73xx_ds_ops;
1218 	ret = dsa_register_switch(vsc->ds);
1219 	if (ret) {
1220 		dev_err(dev, "unable to register switch (%d)\n", ret);
1221 		return ret;
1222 	}
1223 
1224 	ret = vsc73xx_gpio_probe(vsc);
1225 	if (ret) {
1226 		dsa_unregister_switch(vsc->ds);
1227 		return ret;
1228 	}
1229 
1230 	return 0;
1231 }
1232 EXPORT_SYMBOL(vsc73xx_probe);
1233 
1234 void vsc73xx_remove(struct vsc73xx *vsc)
1235 {
1236 	dsa_unregister_switch(vsc->ds);
1237 	gpiod_set_value(vsc->reset, 1);
1238 }
1239 EXPORT_SYMBOL(vsc73xx_remove);
1240 
1241 void vsc73xx_shutdown(struct vsc73xx *vsc)
1242 {
1243 	dsa_switch_shutdown(vsc->ds);
1244 }
1245 EXPORT_SYMBOL(vsc73xx_shutdown);
1246 
1247 MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
1248 MODULE_DESCRIPTION("Vitesse VSC7385/7388/7395/7398 driver");
1249 MODULE_LICENSE("GPL v2");
1250