1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name> 4 * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> 5 * Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved. 6 * Copyright (c) 2016 John Crispin <john@phrozen.org> 7 */ 8 9 #include <linux/module.h> 10 #include <linux/phy.h> 11 #include <linux/netdevice.h> 12 #include <linux/bitfield.h> 13 #include <linux/regmap.h> 14 #include <net/dsa.h> 15 #include <linux/of_net.h> 16 #include <linux/of_mdio.h> 17 #include <linux/of_platform.h> 18 #include <linux/mdio.h> 19 #include <linux/phylink.h> 20 #include <linux/gpio/consumer.h> 21 #include <linux/etherdevice.h> 22 #include <linux/dsa/tag_qca.h> 23 24 #include "qca8k.h" 25 #include "qca8k_leds.h" 26 27 static void 28 qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page) 29 { 30 regaddr >>= 1; 31 *r1 = regaddr & 0x1e; 32 33 regaddr >>= 5; 34 *r2 = regaddr & 0x7; 35 36 regaddr >>= 3; 37 *page = regaddr & 0x3ff; 38 } 39 40 static int 41 qca8k_mii_write_lo(struct mii_bus *bus, int phy_id, u32 regnum, u32 val) 42 { 43 int ret; 44 u16 lo; 45 46 lo = val & 0xffff; 47 ret = bus->write(bus, phy_id, regnum, lo); 48 if (ret < 0) 49 dev_err_ratelimited(&bus->dev, 50 "failed to write qca8k 32bit lo register\n"); 51 52 return ret; 53 } 54 55 static int 56 qca8k_mii_write_hi(struct mii_bus *bus, int phy_id, u32 regnum, u32 val) 57 { 58 int ret; 59 u16 hi; 60 61 hi = (u16)(val >> 16); 62 ret = bus->write(bus, phy_id, regnum, hi); 63 if (ret < 0) 64 dev_err_ratelimited(&bus->dev, 65 "failed to write qca8k 32bit hi register\n"); 66 67 return ret; 68 } 69 70 static int 71 qca8k_mii_read_lo(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val) 72 { 73 int ret; 74 75 ret = bus->read(bus, phy_id, regnum); 76 if (ret < 0) 77 goto err; 78 79 *val = ret & 0xffff; 80 return 0; 81 82 err: 83 dev_err_ratelimited(&bus->dev, 84 "failed to read qca8k 32bit lo register\n"); 85 *val = 0; 86 87 return ret; 88 } 89 90 static int 91 qca8k_mii_read_hi(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val) 92 { 93 int ret; 94 95 ret = bus->read(bus, phy_id, regnum); 96 if (ret < 0) 97 goto err; 98 99 *val = ret << 16; 100 return 0; 101 102 err: 103 dev_err_ratelimited(&bus->dev, 104 "failed to read qca8k 32bit hi register\n"); 105 *val = 0; 106 107 return ret; 108 } 109 110 static int 111 qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val) 112 { 113 u32 hi, lo; 114 int ret; 115 116 *val = 0; 117 118 ret = qca8k_mii_read_lo(bus, phy_id, regnum, &lo); 119 if (ret < 0) 120 goto err; 121 122 ret = qca8k_mii_read_hi(bus, phy_id, regnum + 1, &hi); 123 if (ret < 0) 124 goto err; 125 126 *val = lo | hi; 127 128 err: 129 return ret; 130 } 131 132 static void 133 qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val) 134 { 135 if (qca8k_mii_write_lo(bus, phy_id, regnum, val) < 0) 136 return; 137 138 qca8k_mii_write_hi(bus, phy_id, regnum + 1, val); 139 } 140 141 static int 142 qca8k_set_page(struct qca8k_priv *priv, u16 page) 143 { 144 u16 *cached_page = &priv->mdio_cache.page; 145 struct mii_bus *bus = priv->bus; 146 int ret; 147 148 if (page == *cached_page) 149 return 0; 150 151 ret = bus->write(bus, 0x18, 0, page); 152 if (ret < 0) { 153 dev_err_ratelimited(&bus->dev, 154 "failed to set qca8k page\n"); 155 return ret; 156 } 157 158 *cached_page = page; 159 usleep_range(1000, 2000); 160 return 0; 161 } 162 163 static void qca8k_rw_reg_ack_handler(struct dsa_switch *ds, struct sk_buff *skb) 164 { 165 struct qca8k_mgmt_eth_data *mgmt_eth_data; 166 struct qca8k_priv *priv = ds->priv; 167 struct qca_mgmt_ethhdr *mgmt_ethhdr; 168 u32 command; 169 u8 len, cmd; 170 int i; 171 172 mgmt_ethhdr = (struct qca_mgmt_ethhdr *)skb_mac_header(skb); 173 mgmt_eth_data = &priv->mgmt_eth_data; 174 175 command = get_unaligned_le32(&mgmt_ethhdr->command); 176 cmd = FIELD_GET(QCA_HDR_MGMT_CMD, command); 177 178 len = FIELD_GET(QCA_HDR_MGMT_LENGTH, command); 179 /* Special case for len of 15 as this is the max value for len and needs to 180 * be increased before converting it from word to dword. 181 */ 182 if (len == 15) 183 len++; 184 185 /* We can ignore odd value, we always round up them in the alloc function. */ 186 len *= sizeof(u16); 187 188 /* Make sure the seq match the requested packet */ 189 if (get_unaligned_le32(&mgmt_ethhdr->seq) == mgmt_eth_data->seq) 190 mgmt_eth_data->ack = true; 191 192 if (cmd == MDIO_READ) { 193 u32 *val = mgmt_eth_data->data; 194 195 *val = get_unaligned_le32(&mgmt_ethhdr->mdio_data); 196 197 /* Get the rest of the 12 byte of data. 198 * The read/write function will extract the requested data. 199 */ 200 if (len > QCA_HDR_MGMT_DATA1_LEN) { 201 __le32 *data2 = (__le32 *)skb->data; 202 int data_len = min_t(int, QCA_HDR_MGMT_DATA2_LEN, 203 len - QCA_HDR_MGMT_DATA1_LEN); 204 205 val++; 206 207 for (i = sizeof(u32); i <= data_len; i += sizeof(u32)) { 208 *val = get_unaligned_le32(data2); 209 val++; 210 data2++; 211 } 212 } 213 } 214 215 complete(&mgmt_eth_data->rw_done); 216 } 217 218 static struct sk_buff *qca8k_alloc_mdio_header(enum mdio_cmd cmd, u32 reg, u32 *val, 219 int priority, unsigned int len) 220 { 221 struct qca_mgmt_ethhdr *mgmt_ethhdr; 222 unsigned int real_len; 223 struct sk_buff *skb; 224 __le32 *data2; 225 u32 command; 226 u16 hdr; 227 int i; 228 229 skb = dev_alloc_skb(QCA_HDR_MGMT_PKT_LEN); 230 if (!skb) 231 return NULL; 232 233 /* Hdr mgmt length value is in step of word size. 234 * As an example to process 4 byte of data the correct length to set is 2. 235 * To process 8 byte 4, 12 byte 6, 16 byte 8... 236 * 237 * Odd values will always return the next size on the ack packet. 238 * (length of 3 (6 byte) will always return 8 bytes of data) 239 * 240 * This means that a value of 15 (0xf) actually means reading/writing 32 bytes 241 * of data. 242 * 243 * To correctly calculate the length we devide the requested len by word and 244 * round up. 245 * On the ack function we can skip the odd check as we already handle the 246 * case here. 247 */ 248 real_len = DIV_ROUND_UP(len, sizeof(u16)); 249 250 /* We check if the result len is odd and we round up another time to 251 * the next size. (length of 3 will be increased to 4 as switch will always 252 * return 8 bytes) 253 */ 254 if (real_len % sizeof(u16) != 0) 255 real_len++; 256 257 /* Max reg value is 0xf(15) but switch will always return the next size (32 byte) */ 258 if (real_len == 16) 259 real_len--; 260 261 skb_reset_mac_header(skb); 262 skb_set_network_header(skb, skb->len); 263 264 mgmt_ethhdr = skb_push(skb, QCA_HDR_MGMT_HEADER_LEN + QCA_HDR_LEN); 265 266 hdr = FIELD_PREP(QCA_HDR_XMIT_VERSION, QCA_HDR_VERSION); 267 hdr |= FIELD_PREP(QCA_HDR_XMIT_PRIORITY, priority); 268 hdr |= QCA_HDR_XMIT_FROM_CPU; 269 hdr |= FIELD_PREP(QCA_HDR_XMIT_DP_BIT, BIT(0)); 270 hdr |= FIELD_PREP(QCA_HDR_XMIT_CONTROL, QCA_HDR_XMIT_TYPE_RW_REG); 271 272 command = FIELD_PREP(QCA_HDR_MGMT_ADDR, reg); 273 command |= FIELD_PREP(QCA_HDR_MGMT_LENGTH, real_len); 274 command |= FIELD_PREP(QCA_HDR_MGMT_CMD, cmd); 275 command |= FIELD_PREP(QCA_HDR_MGMT_CHECK_CODE, 276 QCA_HDR_MGMT_CHECK_CODE_VAL); 277 278 put_unaligned_le32(command, &mgmt_ethhdr->command); 279 280 if (cmd == MDIO_WRITE) 281 put_unaligned_le32(*val, &mgmt_ethhdr->mdio_data); 282 283 mgmt_ethhdr->hdr = htons(hdr); 284 285 data2 = skb_put_zero(skb, QCA_HDR_MGMT_DATA2_LEN + QCA_HDR_MGMT_PADDING_LEN); 286 if (cmd == MDIO_WRITE && len > QCA_HDR_MGMT_DATA1_LEN) { 287 int data_len = min_t(int, QCA_HDR_MGMT_DATA2_LEN, 288 len - QCA_HDR_MGMT_DATA1_LEN); 289 290 val++; 291 292 for (i = sizeof(u32); i <= data_len; i += sizeof(u32)) { 293 put_unaligned_le32(*val, data2); 294 data2++; 295 val++; 296 } 297 } 298 299 return skb; 300 } 301 302 static void qca8k_mdio_header_fill_seq_num(struct sk_buff *skb, u32 seq_num) 303 { 304 struct qca_mgmt_ethhdr *mgmt_ethhdr; 305 u32 seq; 306 307 seq = FIELD_PREP(QCA_HDR_MGMT_SEQ_NUM, seq_num); 308 mgmt_ethhdr = (struct qca_mgmt_ethhdr *)skb->data; 309 put_unaligned_le32(seq, &mgmt_ethhdr->seq); 310 } 311 312 static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len) 313 { 314 struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data; 315 struct sk_buff *skb; 316 bool ack; 317 int ret; 318 319 skb = qca8k_alloc_mdio_header(MDIO_READ, reg, NULL, 320 QCA8K_ETHERNET_MDIO_PRIORITY, len); 321 if (!skb) 322 return -ENOMEM; 323 324 mutex_lock(&mgmt_eth_data->mutex); 325 326 /* Check if the mgmt_conduit if is operational */ 327 if (!priv->mgmt_conduit) { 328 kfree_skb(skb); 329 mutex_unlock(&mgmt_eth_data->mutex); 330 return -EINVAL; 331 } 332 333 skb->dev = priv->mgmt_conduit; 334 335 reinit_completion(&mgmt_eth_data->rw_done); 336 337 /* Increment seq_num and set it in the mdio pkt */ 338 mgmt_eth_data->seq++; 339 qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq); 340 mgmt_eth_data->ack = false; 341 342 dev_queue_xmit(skb); 343 344 ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, 345 msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT)); 346 347 *val = mgmt_eth_data->data[0]; 348 if (len > QCA_HDR_MGMT_DATA1_LEN) 349 memcpy(val + 1, mgmt_eth_data->data + 1, len - QCA_HDR_MGMT_DATA1_LEN); 350 351 ack = mgmt_eth_data->ack; 352 353 mutex_unlock(&mgmt_eth_data->mutex); 354 355 if (ret <= 0) 356 return -ETIMEDOUT; 357 358 if (!ack) 359 return -EINVAL; 360 361 return 0; 362 } 363 364 static int qca8k_write_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len) 365 { 366 struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data; 367 struct sk_buff *skb; 368 bool ack; 369 int ret; 370 371 skb = qca8k_alloc_mdio_header(MDIO_WRITE, reg, val, 372 QCA8K_ETHERNET_MDIO_PRIORITY, len); 373 if (!skb) 374 return -ENOMEM; 375 376 mutex_lock(&mgmt_eth_data->mutex); 377 378 /* Check if the mgmt_conduit if is operational */ 379 if (!priv->mgmt_conduit) { 380 kfree_skb(skb); 381 mutex_unlock(&mgmt_eth_data->mutex); 382 return -EINVAL; 383 } 384 385 skb->dev = priv->mgmt_conduit; 386 387 reinit_completion(&mgmt_eth_data->rw_done); 388 389 /* Increment seq_num and set it in the mdio pkt */ 390 mgmt_eth_data->seq++; 391 qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq); 392 mgmt_eth_data->ack = false; 393 394 dev_queue_xmit(skb); 395 396 ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, 397 msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT)); 398 399 ack = mgmt_eth_data->ack; 400 401 mutex_unlock(&mgmt_eth_data->mutex); 402 403 if (ret <= 0) 404 return -ETIMEDOUT; 405 406 if (!ack) 407 return -EINVAL; 408 409 return 0; 410 } 411 412 static int 413 qca8k_regmap_update_bits_eth(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val) 414 { 415 u32 val = 0; 416 int ret; 417 418 ret = qca8k_read_eth(priv, reg, &val, sizeof(val)); 419 if (ret) 420 return ret; 421 422 val &= ~mask; 423 val |= write_val; 424 425 return qca8k_write_eth(priv, reg, &val, sizeof(val)); 426 } 427 428 static int 429 qca8k_read_mii(struct qca8k_priv *priv, uint32_t reg, uint32_t *val) 430 { 431 struct mii_bus *bus = priv->bus; 432 u16 r1, r2, page; 433 int ret; 434 435 qca8k_split_addr(reg, &r1, &r2, &page); 436 437 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 438 439 ret = qca8k_set_page(priv, page); 440 if (ret < 0) 441 goto exit; 442 443 ret = qca8k_mii_read32(bus, 0x10 | r2, r1, val); 444 445 exit: 446 mutex_unlock(&bus->mdio_lock); 447 return ret; 448 } 449 450 static int 451 qca8k_write_mii(struct qca8k_priv *priv, uint32_t reg, uint32_t val) 452 { 453 struct mii_bus *bus = priv->bus; 454 u16 r1, r2, page; 455 int ret; 456 457 qca8k_split_addr(reg, &r1, &r2, &page); 458 459 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 460 461 ret = qca8k_set_page(priv, page); 462 if (ret < 0) 463 goto exit; 464 465 qca8k_mii_write32(bus, 0x10 | r2, r1, val); 466 467 exit: 468 mutex_unlock(&bus->mdio_lock); 469 return ret; 470 } 471 472 static int 473 qca8k_regmap_update_bits_mii(struct qca8k_priv *priv, uint32_t reg, 474 uint32_t mask, uint32_t write_val) 475 { 476 struct mii_bus *bus = priv->bus; 477 u16 r1, r2, page; 478 u32 val; 479 int ret; 480 481 qca8k_split_addr(reg, &r1, &r2, &page); 482 483 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 484 485 ret = qca8k_set_page(priv, page); 486 if (ret < 0) 487 goto exit; 488 489 ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val); 490 if (ret < 0) 491 goto exit; 492 493 val &= ~mask; 494 val |= write_val; 495 qca8k_mii_write32(bus, 0x10 | r2, r1, val); 496 497 exit: 498 mutex_unlock(&bus->mdio_lock); 499 500 return ret; 501 } 502 503 static int 504 qca8k_bulk_read(void *ctx, const void *reg_buf, size_t reg_len, 505 void *val_buf, size_t val_len) 506 { 507 int i, count = val_len / sizeof(u32), ret; 508 struct qca8k_priv *priv = ctx; 509 u32 reg = *(u16 *)reg_buf; 510 511 if (priv->mgmt_conduit && 512 !qca8k_read_eth(priv, reg, val_buf, val_len)) 513 return 0; 514 515 /* loop count times and increment reg of 4 */ 516 for (i = 0; i < count; i++, reg += sizeof(u32)) { 517 ret = qca8k_read_mii(priv, reg, val_buf + i); 518 if (ret < 0) 519 return ret; 520 } 521 522 return 0; 523 } 524 525 static int 526 qca8k_bulk_gather_write(void *ctx, const void *reg_buf, size_t reg_len, 527 const void *val_buf, size_t val_len) 528 { 529 int i, count = val_len / sizeof(u32), ret; 530 struct qca8k_priv *priv = ctx; 531 u32 reg = *(u16 *)reg_buf; 532 u32 *val = (u32 *)val_buf; 533 534 if (priv->mgmt_conduit && 535 !qca8k_write_eth(priv, reg, val, val_len)) 536 return 0; 537 538 /* loop count times, increment reg of 4 and increment val ptr to 539 * the next value 540 */ 541 for (i = 0; i < count; i++, reg += sizeof(u32), val++) { 542 ret = qca8k_write_mii(priv, reg, *val); 543 if (ret < 0) 544 return ret; 545 } 546 547 return 0; 548 } 549 550 static int 551 qca8k_bulk_write(void *ctx, const void *data, size_t bytes) 552 { 553 return qca8k_bulk_gather_write(ctx, data, sizeof(u16), data + sizeof(u16), 554 bytes - sizeof(u16)); 555 } 556 557 static int 558 qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_val) 559 { 560 struct qca8k_priv *priv = ctx; 561 562 if (!qca8k_regmap_update_bits_eth(priv, reg, mask, write_val)) 563 return 0; 564 565 return qca8k_regmap_update_bits_mii(priv, reg, mask, write_val); 566 } 567 568 static struct regmap_config qca8k_regmap_config = { 569 .reg_bits = 16, 570 .val_bits = 32, 571 .reg_stride = 4, 572 .max_register = 0x16ac, /* end MIB - Port6 range */ 573 .read = qca8k_bulk_read, 574 .write = qca8k_bulk_write, 575 .reg_update_bits = qca8k_regmap_update_bits, 576 .rd_table = &qca8k_readable_table, 577 .disable_locking = true, /* Locking is handled by qca8k read/write */ 578 .cache_type = REGCACHE_NONE, /* Explicitly disable CACHE */ 579 .max_raw_read = 32, /* mgmt eth can read up to 8 registers at time */ 580 /* ATU regs suffer from a bug where some data are not correctly 581 * written. Disable bulk write to correctly write ATU entry. 582 */ 583 .use_single_write = true, 584 }; 585 586 static int 587 qca8k_phy_eth_busy_wait(struct qca8k_mgmt_eth_data *mgmt_eth_data, 588 struct sk_buff *read_skb, u32 *val) 589 { 590 struct sk_buff *skb = skb_copy(read_skb, GFP_KERNEL); 591 bool ack; 592 int ret; 593 594 if (!skb) 595 return -ENOMEM; 596 597 reinit_completion(&mgmt_eth_data->rw_done); 598 599 /* Increment seq_num and set it in the copy pkt */ 600 mgmt_eth_data->seq++; 601 qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq); 602 mgmt_eth_data->ack = false; 603 604 dev_queue_xmit(skb); 605 606 ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, 607 QCA8K_ETHERNET_TIMEOUT); 608 609 ack = mgmt_eth_data->ack; 610 611 if (ret <= 0) 612 return -ETIMEDOUT; 613 614 if (!ack) 615 return -EINVAL; 616 617 *val = mgmt_eth_data->data[0]; 618 619 return 0; 620 } 621 622 static int 623 qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy, 624 int regnum, u16 data) 625 { 626 struct sk_buff *write_skb, *clear_skb, *read_skb; 627 struct qca8k_mgmt_eth_data *mgmt_eth_data; 628 u32 write_val, clear_val = 0, val; 629 struct net_device *mgmt_conduit; 630 int ret, ret1; 631 bool ack; 632 633 if (regnum >= QCA8K_MDIO_MASTER_MAX_REG) 634 return -EINVAL; 635 636 mgmt_eth_data = &priv->mgmt_eth_data; 637 638 write_val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN | 639 QCA8K_MDIO_MASTER_PHY_ADDR(phy) | 640 QCA8K_MDIO_MASTER_REG_ADDR(regnum); 641 642 if (read) { 643 write_val |= QCA8K_MDIO_MASTER_READ; 644 } else { 645 write_val |= QCA8K_MDIO_MASTER_WRITE; 646 write_val |= QCA8K_MDIO_MASTER_DATA(data); 647 } 648 649 /* Prealloc all the needed skb before the lock */ 650 write_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, &write_val, 651 QCA8K_ETHERNET_PHY_PRIORITY, sizeof(write_val)); 652 if (!write_skb) 653 return -ENOMEM; 654 655 clear_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, &clear_val, 656 QCA8K_ETHERNET_PHY_PRIORITY, sizeof(clear_val)); 657 if (!clear_skb) { 658 ret = -ENOMEM; 659 goto err_clear_skb; 660 } 661 662 read_skb = qca8k_alloc_mdio_header(MDIO_READ, QCA8K_MDIO_MASTER_CTRL, &clear_val, 663 QCA8K_ETHERNET_PHY_PRIORITY, sizeof(clear_val)); 664 if (!read_skb) { 665 ret = -ENOMEM; 666 goto err_read_skb; 667 } 668 669 /* It seems that accessing the switch's internal PHYs via management 670 * packets still uses the MDIO bus within the switch internally, and 671 * these accesses can conflict with external MDIO accesses to other 672 * devices on the MDIO bus. 673 * We therefore need to lock the MDIO bus onto which the switch is 674 * connected. 675 */ 676 mutex_lock(&priv->bus->mdio_lock); 677 678 /* Actually start the request: 679 * 1. Send mdio master packet 680 * 2. Busy Wait for mdio master command 681 * 3. Get the data if we are reading 682 * 4. Reset the mdio master (even with error) 683 */ 684 mutex_lock(&mgmt_eth_data->mutex); 685 686 /* Check if mgmt_conduit is operational */ 687 mgmt_conduit = priv->mgmt_conduit; 688 if (!mgmt_conduit) { 689 mutex_unlock(&mgmt_eth_data->mutex); 690 mutex_unlock(&priv->bus->mdio_lock); 691 ret = -EINVAL; 692 goto err_mgmt_conduit; 693 } 694 695 read_skb->dev = mgmt_conduit; 696 clear_skb->dev = mgmt_conduit; 697 write_skb->dev = mgmt_conduit; 698 699 reinit_completion(&mgmt_eth_data->rw_done); 700 701 /* Increment seq_num and set it in the write pkt */ 702 mgmt_eth_data->seq++; 703 qca8k_mdio_header_fill_seq_num(write_skb, mgmt_eth_data->seq); 704 mgmt_eth_data->ack = false; 705 706 dev_queue_xmit(write_skb); 707 708 ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, 709 QCA8K_ETHERNET_TIMEOUT); 710 711 ack = mgmt_eth_data->ack; 712 713 if (ret <= 0) { 714 ret = -ETIMEDOUT; 715 kfree_skb(read_skb); 716 goto exit; 717 } 718 719 if (!ack) { 720 ret = -EINVAL; 721 kfree_skb(read_skb); 722 goto exit; 723 } 724 725 ret = read_poll_timeout(qca8k_phy_eth_busy_wait, ret1, 726 !(val & QCA8K_MDIO_MASTER_BUSY), 0, 727 QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false, 728 mgmt_eth_data, read_skb, &val); 729 730 if (ret < 0 && ret1 < 0) { 731 ret = ret1; 732 goto exit; 733 } 734 735 if (read) { 736 reinit_completion(&mgmt_eth_data->rw_done); 737 738 /* Increment seq_num and set it in the read pkt */ 739 mgmt_eth_data->seq++; 740 qca8k_mdio_header_fill_seq_num(read_skb, mgmt_eth_data->seq); 741 mgmt_eth_data->ack = false; 742 743 dev_queue_xmit(read_skb); 744 745 ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, 746 QCA8K_ETHERNET_TIMEOUT); 747 748 ack = mgmt_eth_data->ack; 749 750 if (ret <= 0) { 751 ret = -ETIMEDOUT; 752 goto exit; 753 } 754 755 if (!ack) { 756 ret = -EINVAL; 757 goto exit; 758 } 759 760 ret = mgmt_eth_data->data[0] & QCA8K_MDIO_MASTER_DATA_MASK; 761 } else { 762 kfree_skb(read_skb); 763 } 764 exit: 765 reinit_completion(&mgmt_eth_data->rw_done); 766 767 /* Increment seq_num and set it in the clear pkt */ 768 mgmt_eth_data->seq++; 769 qca8k_mdio_header_fill_seq_num(clear_skb, mgmt_eth_data->seq); 770 mgmt_eth_data->ack = false; 771 772 dev_queue_xmit(clear_skb); 773 774 wait_for_completion_timeout(&mgmt_eth_data->rw_done, 775 QCA8K_ETHERNET_TIMEOUT); 776 777 mutex_unlock(&mgmt_eth_data->mutex); 778 mutex_unlock(&priv->bus->mdio_lock); 779 780 return ret; 781 782 /* Error handling before lock */ 783 err_mgmt_conduit: 784 kfree_skb(read_skb); 785 err_read_skb: 786 kfree_skb(clear_skb); 787 err_clear_skb: 788 kfree_skb(write_skb); 789 790 return ret; 791 } 792 793 static int 794 qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask) 795 { 796 u16 r1, r2, page; 797 u32 val; 798 int ret, ret1; 799 800 qca8k_split_addr(reg, &r1, &r2, &page); 801 802 ret = read_poll_timeout(qca8k_mii_read_hi, ret1, !(val & mask), 0, 803 QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false, 804 bus, 0x10 | r2, r1 + 1, &val); 805 806 /* Check if qca8k_read has failed for a different reason 807 * before returnting -ETIMEDOUT 808 */ 809 if (ret < 0 && ret1 < 0) 810 return ret1; 811 812 return ret; 813 } 814 815 static int 816 qca8k_mdio_write(struct qca8k_priv *priv, int phy, int regnum, u16 data) 817 { 818 struct mii_bus *bus = priv->bus; 819 u16 r1, r2, page; 820 u32 val; 821 int ret; 822 823 if (regnum >= QCA8K_MDIO_MASTER_MAX_REG) 824 return -EINVAL; 825 826 val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN | 827 QCA8K_MDIO_MASTER_WRITE | QCA8K_MDIO_MASTER_PHY_ADDR(phy) | 828 QCA8K_MDIO_MASTER_REG_ADDR(regnum) | 829 QCA8K_MDIO_MASTER_DATA(data); 830 831 qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page); 832 833 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 834 835 ret = qca8k_set_page(priv, page); 836 if (ret) 837 goto exit; 838 839 qca8k_mii_write32(bus, 0x10 | r2, r1, val); 840 841 ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL, 842 QCA8K_MDIO_MASTER_BUSY); 843 844 exit: 845 /* even if the busy_wait timeouts try to clear the MASTER_EN */ 846 qca8k_mii_write_hi(bus, 0x10 | r2, r1 + 1, 0); 847 848 mutex_unlock(&bus->mdio_lock); 849 850 return ret; 851 } 852 853 static int 854 qca8k_mdio_read(struct qca8k_priv *priv, int phy, int regnum) 855 { 856 struct mii_bus *bus = priv->bus; 857 u16 r1, r2, page; 858 u32 val; 859 int ret; 860 861 if (regnum >= QCA8K_MDIO_MASTER_MAX_REG) 862 return -EINVAL; 863 864 val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN | 865 QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) | 866 QCA8K_MDIO_MASTER_REG_ADDR(regnum); 867 868 qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page); 869 870 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 871 872 ret = qca8k_set_page(priv, page); 873 if (ret) 874 goto exit; 875 876 qca8k_mii_write_hi(bus, 0x10 | r2, r1 + 1, val); 877 878 ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL, 879 QCA8K_MDIO_MASTER_BUSY); 880 if (ret) 881 goto exit; 882 883 ret = qca8k_mii_read_lo(bus, 0x10 | r2, r1, &val); 884 885 exit: 886 /* even if the busy_wait timeouts try to clear the MASTER_EN */ 887 qca8k_mii_write_hi(bus, 0x10 | r2, r1 + 1, 0); 888 889 mutex_unlock(&bus->mdio_lock); 890 891 if (ret >= 0) 892 ret = val & QCA8K_MDIO_MASTER_DATA_MASK; 893 894 return ret; 895 } 896 897 static int 898 qca8k_internal_mdio_write(struct mii_bus *slave_bus, int phy, int regnum, u16 data) 899 { 900 struct qca8k_priv *priv = slave_bus->priv; 901 int ret; 902 903 /* Use mdio Ethernet when available, fallback to legacy one on error */ 904 ret = qca8k_phy_eth_command(priv, false, phy, regnum, data); 905 if (!ret) 906 return 0; 907 908 return qca8k_mdio_write(priv, phy, regnum, data); 909 } 910 911 static int 912 qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum) 913 { 914 struct qca8k_priv *priv = slave_bus->priv; 915 int ret; 916 917 /* Use mdio Ethernet when available, fallback to legacy one on error */ 918 ret = qca8k_phy_eth_command(priv, true, phy, regnum, 0); 919 if (ret >= 0) 920 return ret; 921 922 ret = qca8k_mdio_read(priv, phy, regnum); 923 924 if (ret < 0) 925 return 0xffff; 926 927 return ret; 928 } 929 930 static int 931 qca8k_legacy_mdio_write(struct mii_bus *slave_bus, int port, int regnum, u16 data) 932 { 933 port = qca8k_port_to_phy(port) % PHY_MAX_ADDR; 934 935 return qca8k_internal_mdio_write(slave_bus, port, regnum, data); 936 } 937 938 static int 939 qca8k_legacy_mdio_read(struct mii_bus *slave_bus, int port, int regnum) 940 { 941 port = qca8k_port_to_phy(port) % PHY_MAX_ADDR; 942 943 return qca8k_internal_mdio_read(slave_bus, port, regnum); 944 } 945 946 static int 947 qca8k_mdio_register(struct qca8k_priv *priv) 948 { 949 struct dsa_switch *ds = priv->ds; 950 struct device *dev = ds->dev; 951 struct device_node *mdio; 952 struct mii_bus *bus; 953 int ret = 0; 954 955 mdio = of_get_child_by_name(dev->of_node, "mdio"); 956 if (mdio && !of_device_is_available(mdio)) 957 goto out_put_node; 958 959 bus = devm_mdiobus_alloc(dev); 960 if (!bus) { 961 ret = -ENOMEM; 962 goto out_put_node; 963 } 964 965 priv->internal_mdio_bus = bus; 966 bus->priv = (void *)priv; 967 snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d.%d", 968 ds->dst->index, ds->index); 969 bus->parent = dev; 970 971 if (mdio) { 972 /* Check if the device tree declares the port:phy mapping */ 973 bus->name = "qca8k user mii"; 974 bus->read = qca8k_internal_mdio_read; 975 bus->write = qca8k_internal_mdio_write; 976 } else { 977 /* If a mapping can't be found, the legacy mapping is used, 978 * using qca8k_port_to_phy() 979 */ 980 ds->user_mii_bus = bus; 981 bus->phy_mask = ~ds->phys_mii_mask; 982 bus->name = "qca8k-legacy user mii"; 983 bus->read = qca8k_legacy_mdio_read; 984 bus->write = qca8k_legacy_mdio_write; 985 } 986 987 ret = devm_of_mdiobus_register(dev, bus, mdio); 988 989 out_put_node: 990 of_node_put(mdio); 991 return ret; 992 } 993 994 static int 995 qca8k_setup_mdio_bus(struct qca8k_priv *priv) 996 { 997 u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg; 998 struct device_node *ports, *port; 999 phy_interface_t mode; 1000 int ret; 1001 1002 ports = of_get_child_by_name(priv->dev->of_node, "ports"); 1003 if (!ports) 1004 ports = of_get_child_by_name(priv->dev->of_node, "ethernet-ports"); 1005 1006 if (!ports) 1007 return -EINVAL; 1008 1009 for_each_available_child_of_node(ports, port) { 1010 ret = of_property_read_u32(port, "reg", ®); 1011 if (ret) { 1012 of_node_put(port); 1013 of_node_put(ports); 1014 return ret; 1015 } 1016 1017 if (!dsa_is_user_port(priv->ds, reg)) 1018 continue; 1019 1020 of_get_phy_mode(port, &mode); 1021 1022 if (of_property_read_bool(port, "phy-handle") && 1023 mode != PHY_INTERFACE_MODE_INTERNAL) 1024 external_mdio_mask |= BIT(reg); 1025 else 1026 internal_mdio_mask |= BIT(reg); 1027 } 1028 1029 of_node_put(ports); 1030 if (!external_mdio_mask && !internal_mdio_mask) { 1031 dev_err(priv->dev, "no PHYs are defined.\n"); 1032 return -EINVAL; 1033 } 1034 1035 /* The QCA8K_MDIO_MASTER_EN Bit, which grants access to PHYs through 1036 * the MDIO_MASTER register also _disconnects_ the external MDC 1037 * passthrough to the internal PHYs. It's not possible to use both 1038 * configurations at the same time! 1039 * 1040 * Because this came up during the review process: 1041 * If the external mdio-bus driver is capable magically disabling 1042 * the QCA8K_MDIO_MASTER_EN and mutex/spin-locking out the qca8k's 1043 * accessors for the time being, it would be possible to pull this 1044 * off. 1045 */ 1046 if (!!external_mdio_mask && !!internal_mdio_mask) { 1047 dev_err(priv->dev, "either internal or external mdio bus configuration is supported.\n"); 1048 return -EINVAL; 1049 } 1050 1051 if (external_mdio_mask) { 1052 /* Make sure to disable the internal mdio bus in cases 1053 * a dt-overlay and driver reload changed the configuration 1054 */ 1055 1056 return regmap_clear_bits(priv->regmap, QCA8K_MDIO_MASTER_CTRL, 1057 QCA8K_MDIO_MASTER_EN); 1058 } 1059 1060 return qca8k_mdio_register(priv); 1061 } 1062 1063 static int 1064 qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv) 1065 { 1066 u32 mask = 0; 1067 int ret = 0; 1068 1069 /* SoC specific settings for ipq8064. 1070 * If more device require this consider adding 1071 * a dedicated binding. 1072 */ 1073 if (of_machine_is_compatible("qcom,ipq8064")) 1074 mask |= QCA8K_MAC_PWR_RGMII0_1_8V; 1075 1076 /* SoC specific settings for ipq8065 */ 1077 if (of_machine_is_compatible("qcom,ipq8065")) 1078 mask |= QCA8K_MAC_PWR_RGMII1_1_8V; 1079 1080 if (mask) { 1081 ret = qca8k_rmw(priv, QCA8K_REG_MAC_PWR_SEL, 1082 QCA8K_MAC_PWR_RGMII0_1_8V | 1083 QCA8K_MAC_PWR_RGMII1_1_8V, 1084 mask); 1085 } 1086 1087 return ret; 1088 } 1089 1090 static int qca8k_find_cpu_port(struct dsa_switch *ds) 1091 { 1092 struct qca8k_priv *priv = ds->priv; 1093 1094 /* Find the connected cpu port. Valid port are 0 or 6 */ 1095 if (dsa_is_cpu_port(ds, 0)) 1096 return 0; 1097 1098 dev_dbg(priv->dev, "port 0 is not the CPU port. Checking port 6"); 1099 1100 if (dsa_is_cpu_port(ds, 6)) 1101 return 6; 1102 1103 return -EINVAL; 1104 } 1105 1106 static int 1107 qca8k_setup_of_pws_reg(struct qca8k_priv *priv) 1108 { 1109 const struct qca8k_match_data *data = priv->info; 1110 struct device_node *node = priv->dev->of_node; 1111 u32 val = 0; 1112 int ret; 1113 1114 /* QCA8327 require to set to the correct mode. 1115 * His bigger brother QCA8328 have the 172 pin layout. 1116 * Should be applied by default but we set this just to make sure. 1117 */ 1118 if (priv->switch_id == QCA8K_ID_QCA8327) { 1119 /* Set the correct package of 148 pin for QCA8327 */ 1120 if (data->reduced_package) 1121 val |= QCA8327_PWS_PACKAGE148_EN; 1122 1123 ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN, 1124 val); 1125 if (ret) 1126 return ret; 1127 } 1128 1129 if (of_property_read_bool(node, "qca,ignore-power-on-sel")) 1130 val |= QCA8K_PWS_POWER_ON_SEL; 1131 1132 if (of_property_read_bool(node, "qca,led-open-drain")) { 1133 if (!(val & QCA8K_PWS_POWER_ON_SEL)) { 1134 dev_err(priv->dev, "qca,led-open-drain require qca,ignore-power-on-sel to be set."); 1135 return -EINVAL; 1136 } 1137 1138 val |= QCA8K_PWS_LED_OPEN_EN_CSR; 1139 } 1140 1141 return qca8k_rmw(priv, QCA8K_REG_PWS, 1142 QCA8K_PWS_LED_OPEN_EN_CSR | QCA8K_PWS_POWER_ON_SEL, 1143 val); 1144 } 1145 1146 static int 1147 qca8k_parse_port_config(struct qca8k_priv *priv) 1148 { 1149 int port, cpu_port_index = -1, ret; 1150 struct device_node *port_dn; 1151 phy_interface_t mode; 1152 struct dsa_port *dp; 1153 u32 delay; 1154 1155 /* We have 2 CPU port. Check them */ 1156 for (port = 0; port < QCA8K_NUM_PORTS; port++) { 1157 /* Skip every other port */ 1158 if (port != 0 && port != 6) 1159 continue; 1160 1161 dp = dsa_to_port(priv->ds, port); 1162 port_dn = dp->dn; 1163 cpu_port_index++; 1164 1165 if (!of_device_is_available(port_dn)) 1166 continue; 1167 1168 ret = of_get_phy_mode(port_dn, &mode); 1169 if (ret) 1170 continue; 1171 1172 switch (mode) { 1173 case PHY_INTERFACE_MODE_RGMII: 1174 case PHY_INTERFACE_MODE_RGMII_ID: 1175 case PHY_INTERFACE_MODE_RGMII_TXID: 1176 case PHY_INTERFACE_MODE_RGMII_RXID: 1177 case PHY_INTERFACE_MODE_SGMII: 1178 delay = 0; 1179 1180 if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay)) 1181 /* Switch regs accept value in ns, convert ps to ns */ 1182 delay = delay / 1000; 1183 else if (mode == PHY_INTERFACE_MODE_RGMII_ID || 1184 mode == PHY_INTERFACE_MODE_RGMII_TXID) 1185 delay = 1; 1186 1187 if (!FIELD_FIT(QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK, delay)) { 1188 dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value"); 1189 delay = 3; 1190 } 1191 1192 priv->ports_config.rgmii_tx_delay[cpu_port_index] = delay; 1193 1194 delay = 0; 1195 1196 if (!of_property_read_u32(port_dn, "rx-internal-delay-ps", &delay)) 1197 /* Switch regs accept value in ns, convert ps to ns */ 1198 delay = delay / 1000; 1199 else if (mode == PHY_INTERFACE_MODE_RGMII_ID || 1200 mode == PHY_INTERFACE_MODE_RGMII_RXID) 1201 delay = 2; 1202 1203 if (!FIELD_FIT(QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK, delay)) { 1204 dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value"); 1205 delay = 3; 1206 } 1207 1208 priv->ports_config.rgmii_rx_delay[cpu_port_index] = delay; 1209 1210 /* Skip sgmii parsing for rgmii* mode */ 1211 if (mode == PHY_INTERFACE_MODE_RGMII || 1212 mode == PHY_INTERFACE_MODE_RGMII_ID || 1213 mode == PHY_INTERFACE_MODE_RGMII_TXID || 1214 mode == PHY_INTERFACE_MODE_RGMII_RXID) 1215 break; 1216 1217 if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge")) 1218 priv->ports_config.sgmii_tx_clk_falling_edge = true; 1219 1220 if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge")) 1221 priv->ports_config.sgmii_rx_clk_falling_edge = true; 1222 1223 if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) { 1224 priv->ports_config.sgmii_enable_pll = true; 1225 1226 if (priv->switch_id == QCA8K_ID_QCA8327) { 1227 dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling"); 1228 priv->ports_config.sgmii_enable_pll = false; 1229 } 1230 1231 if (priv->switch_revision < 2) 1232 dev_warn(priv->dev, "SGMII PLL should NOT be enabled for qca8337 with revision 2 or more."); 1233 } 1234 1235 break; 1236 default: 1237 continue; 1238 } 1239 } 1240 1241 return 0; 1242 } 1243 1244 static void 1245 qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_index, 1246 u32 reg) 1247 { 1248 u32 delay, val = 0; 1249 int ret; 1250 1251 /* Delay can be declared in 3 different way. 1252 * Mode to rgmii and internal-delay standard binding defined 1253 * rgmii-id or rgmii-tx/rx phy mode set. 1254 * The parse logic set a delay different than 0 only when one 1255 * of the 3 different way is used. In all other case delay is 1256 * not enabled. With ID or TX/RXID delay is enabled and set 1257 * to the default and recommended value. 1258 */ 1259 if (priv->ports_config.rgmii_tx_delay[cpu_port_index]) { 1260 delay = priv->ports_config.rgmii_tx_delay[cpu_port_index]; 1261 1262 val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) | 1263 QCA8K_PORT_PAD_RGMII_TX_DELAY_EN; 1264 } 1265 1266 if (priv->ports_config.rgmii_rx_delay[cpu_port_index]) { 1267 delay = priv->ports_config.rgmii_rx_delay[cpu_port_index]; 1268 1269 val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) | 1270 QCA8K_PORT_PAD_RGMII_RX_DELAY_EN; 1271 } 1272 1273 /* Set RGMII delay based on the selected values */ 1274 ret = qca8k_rmw(priv, reg, 1275 QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK | 1276 QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK | 1277 QCA8K_PORT_PAD_RGMII_TX_DELAY_EN | 1278 QCA8K_PORT_PAD_RGMII_RX_DELAY_EN, 1279 val); 1280 if (ret) 1281 dev_err(priv->dev, "Failed to set internal delay for CPU port%d", 1282 cpu_port_index == QCA8K_CPU_PORT0 ? 0 : 6); 1283 } 1284 1285 static struct phylink_pcs * 1286 qca8k_phylink_mac_select_pcs(struct phylink_config *config, 1287 phy_interface_t interface) 1288 { 1289 struct dsa_port *dp = dsa_phylink_to_port(config); 1290 struct qca8k_priv *priv = dp->ds->priv; 1291 struct phylink_pcs *pcs = NULL; 1292 int port = dp->index; 1293 1294 switch (interface) { 1295 case PHY_INTERFACE_MODE_SGMII: 1296 case PHY_INTERFACE_MODE_1000BASEX: 1297 switch (port) { 1298 case 0: 1299 pcs = &priv->pcs_port_0.pcs; 1300 break; 1301 1302 case 6: 1303 pcs = &priv->pcs_port_6.pcs; 1304 break; 1305 } 1306 break; 1307 1308 default: 1309 break; 1310 } 1311 1312 return pcs; 1313 } 1314 1315 static void 1316 qca8k_phylink_mac_config(struct phylink_config *config, unsigned int mode, 1317 const struct phylink_link_state *state) 1318 { 1319 struct dsa_port *dp = dsa_phylink_to_port(config); 1320 struct dsa_switch *ds = dp->ds; 1321 struct qca8k_priv *priv; 1322 int port = dp->index; 1323 int cpu_port_index; 1324 u32 reg; 1325 1326 priv = ds->priv; 1327 1328 switch (port) { 1329 case 0: /* 1st CPU port */ 1330 if (state->interface != PHY_INTERFACE_MODE_RGMII && 1331 state->interface != PHY_INTERFACE_MODE_RGMII_ID && 1332 state->interface != PHY_INTERFACE_MODE_RGMII_TXID && 1333 state->interface != PHY_INTERFACE_MODE_RGMII_RXID && 1334 state->interface != PHY_INTERFACE_MODE_SGMII) 1335 return; 1336 1337 reg = QCA8K_REG_PORT0_PAD_CTRL; 1338 cpu_port_index = QCA8K_CPU_PORT0; 1339 break; 1340 case 1: 1341 case 2: 1342 case 3: 1343 case 4: 1344 case 5: 1345 /* Internal PHY, nothing to do */ 1346 return; 1347 case 6: /* 2nd CPU port / external PHY */ 1348 if (state->interface != PHY_INTERFACE_MODE_RGMII && 1349 state->interface != PHY_INTERFACE_MODE_RGMII_ID && 1350 state->interface != PHY_INTERFACE_MODE_RGMII_TXID && 1351 state->interface != PHY_INTERFACE_MODE_RGMII_RXID && 1352 state->interface != PHY_INTERFACE_MODE_SGMII && 1353 state->interface != PHY_INTERFACE_MODE_1000BASEX) 1354 return; 1355 1356 reg = QCA8K_REG_PORT6_PAD_CTRL; 1357 cpu_port_index = QCA8K_CPU_PORT6; 1358 break; 1359 default: 1360 dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); 1361 return; 1362 } 1363 1364 if (port != 6 && phylink_autoneg_inband(mode)) { 1365 dev_err(ds->dev, "%s: in-band negotiation unsupported\n", 1366 __func__); 1367 return; 1368 } 1369 1370 switch (state->interface) { 1371 case PHY_INTERFACE_MODE_RGMII: 1372 case PHY_INTERFACE_MODE_RGMII_ID: 1373 case PHY_INTERFACE_MODE_RGMII_TXID: 1374 case PHY_INTERFACE_MODE_RGMII_RXID: 1375 qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN); 1376 1377 /* Configure rgmii delay */ 1378 qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); 1379 1380 /* QCA8337 requires to set rgmii rx delay for all ports. 1381 * This is enabled through PORT5_PAD_CTRL for all ports, 1382 * rather than individual port registers. 1383 */ 1384 if (priv->switch_id == QCA8K_ID_QCA8337) 1385 qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL, 1386 QCA8K_PORT_PAD_RGMII_RX_DELAY_EN); 1387 break; 1388 case PHY_INTERFACE_MODE_SGMII: 1389 case PHY_INTERFACE_MODE_1000BASEX: 1390 /* Enable SGMII on the port */ 1391 qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN); 1392 break; 1393 default: 1394 dev_err(ds->dev, "xMII mode %s not supported for port %d\n", 1395 phy_modes(state->interface), port); 1396 return; 1397 } 1398 } 1399 1400 static void qca8k_phylink_get_caps(struct dsa_switch *ds, int port, 1401 struct phylink_config *config) 1402 { 1403 switch (port) { 1404 case 0: /* 1st CPU port */ 1405 phy_interface_set_rgmii(config->supported_interfaces); 1406 __set_bit(PHY_INTERFACE_MODE_SGMII, 1407 config->supported_interfaces); 1408 break; 1409 1410 case 1: 1411 case 2: 1412 case 3: 1413 case 4: 1414 case 5: 1415 /* Internal PHY */ 1416 __set_bit(PHY_INTERFACE_MODE_GMII, 1417 config->supported_interfaces); 1418 __set_bit(PHY_INTERFACE_MODE_INTERNAL, 1419 config->supported_interfaces); 1420 break; 1421 1422 case 6: /* 2nd CPU port / external PHY */ 1423 phy_interface_set_rgmii(config->supported_interfaces); 1424 __set_bit(PHY_INTERFACE_MODE_SGMII, 1425 config->supported_interfaces); 1426 __set_bit(PHY_INTERFACE_MODE_1000BASEX, 1427 config->supported_interfaces); 1428 break; 1429 } 1430 1431 config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | 1432 MAC_10 | MAC_100 | MAC_1000FD; 1433 } 1434 1435 static void 1436 qca8k_phylink_mac_link_down(struct phylink_config *config, unsigned int mode, 1437 phy_interface_t interface) 1438 { 1439 struct dsa_port *dp = dsa_phylink_to_port(config); 1440 struct qca8k_priv *priv = dp->ds->priv; 1441 1442 qca8k_port_set_status(priv, dp->index, 0); 1443 } 1444 1445 static void 1446 qca8k_phylink_mac_link_up(struct phylink_config *config, 1447 struct phy_device *phydev, unsigned int mode, 1448 phy_interface_t interface, int speed, int duplex, 1449 bool tx_pause, bool rx_pause) 1450 { 1451 struct dsa_port *dp = dsa_phylink_to_port(config); 1452 struct qca8k_priv *priv = dp->ds->priv; 1453 int port = dp->index; 1454 u32 reg; 1455 1456 if (phylink_autoneg_inband(mode)) { 1457 reg = QCA8K_PORT_STATUS_LINK_AUTO; 1458 } else { 1459 switch (speed) { 1460 case SPEED_10: 1461 reg = QCA8K_PORT_STATUS_SPEED_10; 1462 break; 1463 case SPEED_100: 1464 reg = QCA8K_PORT_STATUS_SPEED_100; 1465 break; 1466 case SPEED_1000: 1467 reg = QCA8K_PORT_STATUS_SPEED_1000; 1468 break; 1469 default: 1470 reg = QCA8K_PORT_STATUS_LINK_AUTO; 1471 break; 1472 } 1473 1474 if (duplex == DUPLEX_FULL) 1475 reg |= QCA8K_PORT_STATUS_DUPLEX; 1476 1477 if (rx_pause || dsa_port_is_cpu(dp)) 1478 reg |= QCA8K_PORT_STATUS_RXFLOW; 1479 1480 if (tx_pause || dsa_port_is_cpu(dp)) 1481 reg |= QCA8K_PORT_STATUS_TXFLOW; 1482 } 1483 1484 reg |= QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC; 1485 1486 qca8k_write(priv, QCA8K_REG_PORT_STATUS(port), reg); 1487 } 1488 1489 static struct qca8k_pcs *pcs_to_qca8k_pcs(struct phylink_pcs *pcs) 1490 { 1491 return container_of(pcs, struct qca8k_pcs, pcs); 1492 } 1493 1494 static void qca8k_pcs_get_state(struct phylink_pcs *pcs, 1495 struct phylink_link_state *state) 1496 { 1497 struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv; 1498 int port = pcs_to_qca8k_pcs(pcs)->port; 1499 u32 reg; 1500 int ret; 1501 1502 ret = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port), ®); 1503 if (ret < 0) { 1504 state->link = false; 1505 return; 1506 } 1507 1508 state->link = !!(reg & QCA8K_PORT_STATUS_LINK_UP); 1509 state->an_complete = state->link; 1510 state->duplex = (reg & QCA8K_PORT_STATUS_DUPLEX) ? DUPLEX_FULL : 1511 DUPLEX_HALF; 1512 1513 switch (reg & QCA8K_PORT_STATUS_SPEED) { 1514 case QCA8K_PORT_STATUS_SPEED_10: 1515 state->speed = SPEED_10; 1516 break; 1517 case QCA8K_PORT_STATUS_SPEED_100: 1518 state->speed = SPEED_100; 1519 break; 1520 case QCA8K_PORT_STATUS_SPEED_1000: 1521 state->speed = SPEED_1000; 1522 break; 1523 default: 1524 state->speed = SPEED_UNKNOWN; 1525 break; 1526 } 1527 1528 if (reg & QCA8K_PORT_STATUS_RXFLOW) 1529 state->pause |= MLO_PAUSE_RX; 1530 if (reg & QCA8K_PORT_STATUS_TXFLOW) 1531 state->pause |= MLO_PAUSE_TX; 1532 } 1533 1534 static int qca8k_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode, 1535 phy_interface_t interface, 1536 const unsigned long *advertising, 1537 bool permit_pause_to_mac) 1538 { 1539 struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv; 1540 int cpu_port_index, ret, port; 1541 u32 reg, val; 1542 1543 port = pcs_to_qca8k_pcs(pcs)->port; 1544 switch (port) { 1545 case 0: 1546 reg = QCA8K_REG_PORT0_PAD_CTRL; 1547 cpu_port_index = QCA8K_CPU_PORT0; 1548 break; 1549 1550 case 6: 1551 reg = QCA8K_REG_PORT6_PAD_CTRL; 1552 cpu_port_index = QCA8K_CPU_PORT6; 1553 break; 1554 1555 default: 1556 WARN_ON(1); 1557 return -EINVAL; 1558 } 1559 1560 /* Enable/disable SerDes auto-negotiation as necessary */ 1561 val = neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED ? 1562 0 : QCA8K_PWS_SERDES_AEN_DIS; 1563 1564 ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8K_PWS_SERDES_AEN_DIS, val); 1565 if (ret) 1566 return ret; 1567 1568 /* Configure the SGMII parameters */ 1569 ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val); 1570 if (ret) 1571 return ret; 1572 1573 val |= QCA8K_SGMII_EN_SD; 1574 1575 if (priv->ports_config.sgmii_enable_pll) 1576 val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | 1577 QCA8K_SGMII_EN_TX; 1578 1579 if (dsa_is_cpu_port(priv->ds, port)) { 1580 /* CPU port, we're talking to the CPU MAC, be a PHY */ 1581 val &= ~QCA8K_SGMII_MODE_CTRL_MASK; 1582 val |= QCA8K_SGMII_MODE_CTRL_PHY; 1583 } else if (interface == PHY_INTERFACE_MODE_SGMII) { 1584 val &= ~QCA8K_SGMII_MODE_CTRL_MASK; 1585 val |= QCA8K_SGMII_MODE_CTRL_MAC; 1586 } else if (interface == PHY_INTERFACE_MODE_1000BASEX) { 1587 val &= ~QCA8K_SGMII_MODE_CTRL_MASK; 1588 val |= QCA8K_SGMII_MODE_CTRL_BASEX; 1589 } 1590 1591 qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val); 1592 1593 /* From original code is reported port instability as SGMII also 1594 * require delay set. Apply advised values here or take them from DT. 1595 */ 1596 if (interface == PHY_INTERFACE_MODE_SGMII) 1597 qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); 1598 /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and 1599 * falling edge is set writing in the PORT0 PAD reg 1600 */ 1601 if (priv->switch_id == QCA8K_ID_QCA8327 || 1602 priv->switch_id == QCA8K_ID_QCA8337) 1603 reg = QCA8K_REG_PORT0_PAD_CTRL; 1604 1605 val = 0; 1606 1607 /* SGMII Clock phase configuration */ 1608 if (priv->ports_config.sgmii_rx_clk_falling_edge) 1609 val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE; 1610 1611 if (priv->ports_config.sgmii_tx_clk_falling_edge) 1612 val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE; 1613 1614 if (val) 1615 ret = qca8k_rmw(priv, reg, 1616 QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE | 1617 QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE, 1618 val); 1619 1620 return 0; 1621 } 1622 1623 static void qca8k_pcs_an_restart(struct phylink_pcs *pcs) 1624 { 1625 } 1626 1627 static const struct phylink_pcs_ops qca8k_pcs_ops = { 1628 .pcs_get_state = qca8k_pcs_get_state, 1629 .pcs_config = qca8k_pcs_config, 1630 .pcs_an_restart = qca8k_pcs_an_restart, 1631 }; 1632 1633 static void qca8k_setup_pcs(struct qca8k_priv *priv, struct qca8k_pcs *qpcs, 1634 int port) 1635 { 1636 qpcs->pcs.ops = &qca8k_pcs_ops; 1637 qpcs->pcs.neg_mode = true; 1638 1639 /* We don't have interrupts for link changes, so we need to poll */ 1640 qpcs->pcs.poll = true; 1641 qpcs->priv = priv; 1642 qpcs->port = port; 1643 } 1644 1645 static void qca8k_mib_autocast_handler(struct dsa_switch *ds, struct sk_buff *skb) 1646 { 1647 struct qca8k_mib_eth_data *mib_eth_data; 1648 struct qca8k_priv *priv = ds->priv; 1649 const struct qca8k_mib_desc *mib; 1650 struct mib_ethhdr *mib_ethhdr; 1651 __le32 *data2; 1652 u8 port; 1653 int i; 1654 1655 mib_ethhdr = (struct mib_ethhdr *)skb_mac_header(skb); 1656 mib_eth_data = &priv->mib_eth_data; 1657 1658 /* The switch autocast every port. Ignore other packet and 1659 * parse only the requested one. 1660 */ 1661 port = FIELD_GET(QCA_HDR_RECV_SOURCE_PORT, ntohs(mib_ethhdr->hdr)); 1662 if (port != mib_eth_data->req_port) 1663 goto exit; 1664 1665 data2 = (__le32 *)skb->data; 1666 1667 for (i = 0; i < priv->info->mib_count; i++) { 1668 mib = &ar8327_mib[i]; 1669 1670 /* First 3 mib are present in the skb head */ 1671 if (i < 3) { 1672 mib_eth_data->data[i] = get_unaligned_le32(mib_ethhdr->data + i); 1673 continue; 1674 } 1675 1676 /* Some mib are 64 bit wide */ 1677 if (mib->size == 2) 1678 mib_eth_data->data[i] = get_unaligned_le64((__le64 *)data2); 1679 else 1680 mib_eth_data->data[i] = get_unaligned_le32(data2); 1681 1682 data2 += mib->size; 1683 } 1684 1685 exit: 1686 /* Complete on receiving all the mib packet */ 1687 if (refcount_dec_and_test(&mib_eth_data->port_parsed)) 1688 complete(&mib_eth_data->rw_done); 1689 } 1690 1691 static int 1692 qca8k_get_ethtool_stats_eth(struct dsa_switch *ds, int port, u64 *data) 1693 { 1694 struct dsa_port *dp = dsa_to_port(ds, port); 1695 struct qca8k_mib_eth_data *mib_eth_data; 1696 struct qca8k_priv *priv = ds->priv; 1697 int ret; 1698 1699 mib_eth_data = &priv->mib_eth_data; 1700 1701 mutex_lock(&mib_eth_data->mutex); 1702 1703 reinit_completion(&mib_eth_data->rw_done); 1704 1705 mib_eth_data->req_port = dp->index; 1706 mib_eth_data->data = data; 1707 refcount_set(&mib_eth_data->port_parsed, QCA8K_NUM_PORTS); 1708 1709 mutex_lock(&priv->reg_mutex); 1710 1711 /* Send mib autocast request */ 1712 ret = regmap_update_bits(priv->regmap, QCA8K_REG_MIB, 1713 QCA8K_MIB_FUNC | QCA8K_MIB_BUSY, 1714 FIELD_PREP(QCA8K_MIB_FUNC, QCA8K_MIB_CAST) | 1715 QCA8K_MIB_BUSY); 1716 1717 mutex_unlock(&priv->reg_mutex); 1718 1719 if (ret) 1720 goto exit; 1721 1722 ret = wait_for_completion_timeout(&mib_eth_data->rw_done, QCA8K_ETHERNET_TIMEOUT); 1723 1724 exit: 1725 mutex_unlock(&mib_eth_data->mutex); 1726 1727 return ret; 1728 } 1729 1730 static u32 qca8k_get_phy_flags(struct dsa_switch *ds, int port) 1731 { 1732 struct qca8k_priv *priv = ds->priv; 1733 1734 /* Communicate to the phy internal driver the switch revision. 1735 * Based on the switch revision different values needs to be 1736 * set to the dbg and mmd reg on the phy. 1737 * The first 2 bit are used to communicate the switch revision 1738 * to the phy driver. 1739 */ 1740 if (port > 0 && port < 6) 1741 return priv->switch_revision; 1742 1743 return 0; 1744 } 1745 1746 static enum dsa_tag_protocol 1747 qca8k_get_tag_protocol(struct dsa_switch *ds, int port, 1748 enum dsa_tag_protocol mp) 1749 { 1750 return DSA_TAG_PROTO_QCA; 1751 } 1752 1753 static void 1754 qca8k_conduit_change(struct dsa_switch *ds, const struct net_device *conduit, 1755 bool operational) 1756 { 1757 struct dsa_port *dp = conduit->dsa_ptr; 1758 struct qca8k_priv *priv = ds->priv; 1759 1760 /* Ethernet MIB/MDIO is only supported for CPU port 0 */ 1761 if (dp->index != 0) 1762 return; 1763 1764 mutex_lock(&priv->mgmt_eth_data.mutex); 1765 mutex_lock(&priv->mib_eth_data.mutex); 1766 1767 priv->mgmt_conduit = operational ? (struct net_device *)conduit : NULL; 1768 1769 mutex_unlock(&priv->mib_eth_data.mutex); 1770 mutex_unlock(&priv->mgmt_eth_data.mutex); 1771 } 1772 1773 static int qca8k_connect_tag_protocol(struct dsa_switch *ds, 1774 enum dsa_tag_protocol proto) 1775 { 1776 struct qca_tagger_data *tagger_data; 1777 1778 switch (proto) { 1779 case DSA_TAG_PROTO_QCA: 1780 tagger_data = ds->tagger_data; 1781 1782 tagger_data->rw_reg_ack_handler = qca8k_rw_reg_ack_handler; 1783 tagger_data->mib_autocast_handler = qca8k_mib_autocast_handler; 1784 1785 break; 1786 default: 1787 return -EOPNOTSUPP; 1788 } 1789 1790 return 0; 1791 } 1792 1793 static void qca8k_setup_hol_fixup(struct qca8k_priv *priv, int port) 1794 { 1795 u32 mask; 1796 1797 switch (port) { 1798 /* The 2 CPU port and port 5 requires some different 1799 * priority than any other ports. 1800 */ 1801 case 0: 1802 case 5: 1803 case 6: 1804 mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) | 1805 QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) | 1806 QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) | 1807 QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) | 1808 QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) | 1809 QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) | 1810 QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e); 1811 break; 1812 default: 1813 mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) | 1814 QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) | 1815 QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) | 1816 QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) | 1817 QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19); 1818 } 1819 regmap_write(priv->regmap, QCA8K_REG_PORT_HOL_CTRL0(port), mask); 1820 1821 mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) | 1822 QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN | 1823 QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN | 1824 QCA8K_PORT_HOL_CTRL1_WRED_EN; 1825 regmap_update_bits(priv->regmap, QCA8K_REG_PORT_HOL_CTRL1(port), 1826 QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK | 1827 QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN | 1828 QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN | 1829 QCA8K_PORT_HOL_CTRL1_WRED_EN, 1830 mask); 1831 } 1832 1833 static int 1834 qca8k_setup(struct dsa_switch *ds) 1835 { 1836 struct qca8k_priv *priv = ds->priv; 1837 struct dsa_port *dp; 1838 int cpu_port, ret; 1839 u32 mask; 1840 1841 cpu_port = qca8k_find_cpu_port(ds); 1842 if (cpu_port < 0) { 1843 dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6"); 1844 return cpu_port; 1845 } 1846 1847 /* Parse CPU port config to be later used in phy_link mac_config */ 1848 ret = qca8k_parse_port_config(priv); 1849 if (ret) 1850 return ret; 1851 1852 ret = qca8k_setup_mdio_bus(priv); 1853 if (ret) 1854 return ret; 1855 1856 ret = qca8k_setup_of_pws_reg(priv); 1857 if (ret) 1858 return ret; 1859 1860 ret = qca8k_setup_mac_pwr_sel(priv); 1861 if (ret) 1862 return ret; 1863 1864 ret = qca8k_setup_led_ctrl(priv); 1865 if (ret) 1866 return ret; 1867 1868 qca8k_setup_pcs(priv, &priv->pcs_port_0, 0); 1869 qca8k_setup_pcs(priv, &priv->pcs_port_6, 6); 1870 1871 /* Make sure MAC06 is disabled */ 1872 ret = regmap_clear_bits(priv->regmap, QCA8K_REG_PORT0_PAD_CTRL, 1873 QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN); 1874 if (ret) { 1875 dev_err(priv->dev, "failed disabling MAC06 exchange"); 1876 return ret; 1877 } 1878 1879 /* Enable CPU Port */ 1880 ret = regmap_set_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0, 1881 QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); 1882 if (ret) { 1883 dev_err(priv->dev, "failed enabling CPU port"); 1884 return ret; 1885 } 1886 1887 /* Enable MIB counters */ 1888 ret = qca8k_mib_init(priv); 1889 if (ret) 1890 dev_warn(priv->dev, "mib init failed"); 1891 1892 /* Initial setup of all ports */ 1893 dsa_switch_for_each_port(dp, ds) { 1894 /* Disable forwarding by default on all ports */ 1895 ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(dp->index), 1896 QCA8K_PORT_LOOKUP_MEMBER, 0); 1897 if (ret) 1898 return ret; 1899 } 1900 1901 /* Disable MAC by default on all user ports */ 1902 dsa_switch_for_each_user_port(dp, ds) 1903 qca8k_port_set_status(priv, dp->index, 0); 1904 1905 /* Enable QCA header mode on all cpu ports */ 1906 dsa_switch_for_each_cpu_port(dp, ds) { 1907 ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(dp->index), 1908 FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) | 1909 FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL)); 1910 if (ret) { 1911 dev_err(priv->dev, "failed enabling QCA header mode on port %d", dp->index); 1912 return ret; 1913 } 1914 } 1915 1916 /* Forward all unknown frames to CPU port for Linux processing 1917 * Notice that in multi-cpu config only one port should be set 1918 * for igmp, unknown, multicast and broadcast packet 1919 */ 1920 ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1, 1921 FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, BIT(cpu_port)) | 1922 FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, BIT(cpu_port)) | 1923 FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, BIT(cpu_port)) | 1924 FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, BIT(cpu_port))); 1925 if (ret) 1926 return ret; 1927 1928 /* CPU port gets connected to all user ports of the switch */ 1929 ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port), 1930 QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); 1931 if (ret) 1932 return ret; 1933 1934 /* Setup connection between CPU port & user ports 1935 * Individual user ports get connected to CPU port only 1936 */ 1937 dsa_switch_for_each_user_port(dp, ds) { 1938 u8 port = dp->index; 1939 1940 ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), 1941 QCA8K_PORT_LOOKUP_MEMBER, 1942 BIT(cpu_port)); 1943 if (ret) 1944 return ret; 1945 1946 ret = regmap_clear_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(port), 1947 QCA8K_PORT_LOOKUP_LEARN); 1948 if (ret) 1949 return ret; 1950 1951 /* For port based vlans to work we need to set the 1952 * default egress vid 1953 */ 1954 ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port), 1955 QCA8K_EGREES_VLAN_PORT_MASK(port), 1956 QCA8K_EGREES_VLAN_PORT(port, QCA8K_PORT_VID_DEF)); 1957 if (ret) 1958 return ret; 1959 1960 ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port), 1961 QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) | 1962 QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF)); 1963 if (ret) 1964 return ret; 1965 } 1966 1967 /* The port 5 of the qca8337 have some problem in flood condition. The 1968 * original legacy driver had some specific buffer and priority settings 1969 * for the different port suggested by the QCA switch team. Add this 1970 * missing settings to improve switch stability under load condition. 1971 * This problem is limited to qca8337 and other qca8k switch are not affected. 1972 */ 1973 if (priv->switch_id == QCA8K_ID_QCA8337) 1974 dsa_switch_for_each_available_port(dp, ds) 1975 qca8k_setup_hol_fixup(priv, dp->index); 1976 1977 /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */ 1978 if (priv->switch_id == QCA8K_ID_QCA8327) { 1979 mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) | 1980 QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496); 1981 qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH, 1982 QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK | 1983 QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK, 1984 mask); 1985 } 1986 1987 /* Setup our port MTUs to match power on defaults */ 1988 ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN); 1989 if (ret) 1990 dev_warn(priv->dev, "failed setting MTU settings"); 1991 1992 /* Flush the FDB table */ 1993 qca8k_fdb_flush(priv); 1994 1995 /* Set min a max ageing value supported */ 1996 ds->ageing_time_min = 7000; 1997 ds->ageing_time_max = 458745000; 1998 1999 /* Set max number of LAGs supported */ 2000 ds->num_lag_ids = QCA8K_NUM_LAGS; 2001 2002 return 0; 2003 } 2004 2005 static const struct phylink_mac_ops qca8k_phylink_mac_ops = { 2006 .mac_select_pcs = qca8k_phylink_mac_select_pcs, 2007 .mac_config = qca8k_phylink_mac_config, 2008 .mac_link_down = qca8k_phylink_mac_link_down, 2009 .mac_link_up = qca8k_phylink_mac_link_up, 2010 }; 2011 2012 static const struct dsa_switch_ops qca8k_switch_ops = { 2013 .get_tag_protocol = qca8k_get_tag_protocol, 2014 .setup = qca8k_setup, 2015 .get_strings = qca8k_get_strings, 2016 .get_ethtool_stats = qca8k_get_ethtool_stats, 2017 .get_sset_count = qca8k_get_sset_count, 2018 .set_ageing_time = qca8k_set_ageing_time, 2019 .get_mac_eee = qca8k_get_mac_eee, 2020 .set_mac_eee = qca8k_set_mac_eee, 2021 .port_enable = qca8k_port_enable, 2022 .port_disable = qca8k_port_disable, 2023 .port_change_mtu = qca8k_port_change_mtu, 2024 .port_max_mtu = qca8k_port_max_mtu, 2025 .port_stp_state_set = qca8k_port_stp_state_set, 2026 .port_pre_bridge_flags = qca8k_port_pre_bridge_flags, 2027 .port_bridge_flags = qca8k_port_bridge_flags, 2028 .port_bridge_join = qca8k_port_bridge_join, 2029 .port_bridge_leave = qca8k_port_bridge_leave, 2030 .port_fast_age = qca8k_port_fast_age, 2031 .port_fdb_add = qca8k_port_fdb_add, 2032 .port_fdb_del = qca8k_port_fdb_del, 2033 .port_fdb_dump = qca8k_port_fdb_dump, 2034 .port_mdb_add = qca8k_port_mdb_add, 2035 .port_mdb_del = qca8k_port_mdb_del, 2036 .port_mirror_add = qca8k_port_mirror_add, 2037 .port_mirror_del = qca8k_port_mirror_del, 2038 .port_vlan_filtering = qca8k_port_vlan_filtering, 2039 .port_vlan_add = qca8k_port_vlan_add, 2040 .port_vlan_del = qca8k_port_vlan_del, 2041 .phylink_get_caps = qca8k_phylink_get_caps, 2042 .get_phy_flags = qca8k_get_phy_flags, 2043 .port_lag_join = qca8k_port_lag_join, 2044 .port_lag_leave = qca8k_port_lag_leave, 2045 .conduit_state_change = qca8k_conduit_change, 2046 .connect_tag_protocol = qca8k_connect_tag_protocol, 2047 }; 2048 2049 static int 2050 qca8k_sw_probe(struct mdio_device *mdiodev) 2051 { 2052 struct qca8k_priv *priv; 2053 int ret; 2054 2055 /* allocate the private data struct so that we can probe the switches 2056 * ID register 2057 */ 2058 priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL); 2059 if (!priv) 2060 return -ENOMEM; 2061 2062 priv->bus = mdiodev->bus; 2063 priv->dev = &mdiodev->dev; 2064 priv->info = of_device_get_match_data(priv->dev); 2065 2066 priv->reset_gpio = devm_gpiod_get_optional(priv->dev, "reset", 2067 GPIOD_OUT_HIGH); 2068 if (IS_ERR(priv->reset_gpio)) 2069 return PTR_ERR(priv->reset_gpio); 2070 2071 if (priv->reset_gpio) { 2072 /* The active low duration must be greater than 10 ms 2073 * and checkpatch.pl wants 20 ms. 2074 */ 2075 msleep(20); 2076 gpiod_set_value_cansleep(priv->reset_gpio, 0); 2077 } 2078 2079 /* Start by setting up the register mapping */ 2080 priv->regmap = devm_regmap_init(&mdiodev->dev, NULL, priv, 2081 &qca8k_regmap_config); 2082 if (IS_ERR(priv->regmap)) { 2083 dev_err(priv->dev, "regmap initialization failed"); 2084 return PTR_ERR(priv->regmap); 2085 } 2086 2087 priv->mdio_cache.page = 0xffff; 2088 2089 /* Check the detected switch id */ 2090 ret = qca8k_read_switch_id(priv); 2091 if (ret) 2092 return ret; 2093 2094 priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL); 2095 if (!priv->ds) 2096 return -ENOMEM; 2097 2098 mutex_init(&priv->mgmt_eth_data.mutex); 2099 init_completion(&priv->mgmt_eth_data.rw_done); 2100 2101 mutex_init(&priv->mib_eth_data.mutex); 2102 init_completion(&priv->mib_eth_data.rw_done); 2103 2104 priv->ds->dev = &mdiodev->dev; 2105 priv->ds->num_ports = QCA8K_NUM_PORTS; 2106 priv->ds->priv = priv; 2107 priv->ds->ops = &qca8k_switch_ops; 2108 priv->ds->phylink_mac_ops = &qca8k_phylink_mac_ops; 2109 mutex_init(&priv->reg_mutex); 2110 dev_set_drvdata(&mdiodev->dev, priv); 2111 2112 return dsa_register_switch(priv->ds); 2113 } 2114 2115 static void 2116 qca8k_sw_remove(struct mdio_device *mdiodev) 2117 { 2118 struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev); 2119 int i; 2120 2121 if (!priv) 2122 return; 2123 2124 for (i = 0; i < QCA8K_NUM_PORTS; i++) 2125 qca8k_port_set_status(priv, i, 0); 2126 2127 dsa_unregister_switch(priv->ds); 2128 } 2129 2130 static void qca8k_sw_shutdown(struct mdio_device *mdiodev) 2131 { 2132 struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev); 2133 2134 if (!priv) 2135 return; 2136 2137 dsa_switch_shutdown(priv->ds); 2138 2139 dev_set_drvdata(&mdiodev->dev, NULL); 2140 } 2141 2142 #ifdef CONFIG_PM_SLEEP 2143 static void 2144 qca8k_set_pm(struct qca8k_priv *priv, int enable) 2145 { 2146 int port; 2147 2148 for (port = 0; port < QCA8K_NUM_PORTS; port++) { 2149 /* Do not enable on resume if the port was 2150 * disabled before. 2151 */ 2152 if (!(priv->port_enabled_map & BIT(port))) 2153 continue; 2154 2155 qca8k_port_set_status(priv, port, enable); 2156 } 2157 } 2158 2159 static int qca8k_suspend(struct device *dev) 2160 { 2161 struct qca8k_priv *priv = dev_get_drvdata(dev); 2162 2163 qca8k_set_pm(priv, 0); 2164 2165 return dsa_switch_suspend(priv->ds); 2166 } 2167 2168 static int qca8k_resume(struct device *dev) 2169 { 2170 struct qca8k_priv *priv = dev_get_drvdata(dev); 2171 2172 qca8k_set_pm(priv, 1); 2173 2174 return dsa_switch_resume(priv->ds); 2175 } 2176 #endif /* CONFIG_PM_SLEEP */ 2177 2178 static SIMPLE_DEV_PM_OPS(qca8k_pm_ops, 2179 qca8k_suspend, qca8k_resume); 2180 2181 static const struct qca8k_info_ops qca8xxx_ops = { 2182 .autocast_mib = qca8k_get_ethtool_stats_eth, 2183 }; 2184 2185 static const struct qca8k_match_data qca8327 = { 2186 .id = QCA8K_ID_QCA8327, 2187 .reduced_package = true, 2188 .mib_count = QCA8K_QCA832X_MIB_COUNT, 2189 .ops = &qca8xxx_ops, 2190 }; 2191 2192 static const struct qca8k_match_data qca8328 = { 2193 .id = QCA8K_ID_QCA8327, 2194 .mib_count = QCA8K_QCA832X_MIB_COUNT, 2195 .ops = &qca8xxx_ops, 2196 }; 2197 2198 static const struct qca8k_match_data qca833x = { 2199 .id = QCA8K_ID_QCA8337, 2200 .mib_count = QCA8K_QCA833X_MIB_COUNT, 2201 .ops = &qca8xxx_ops, 2202 }; 2203 2204 static const struct of_device_id qca8k_of_match[] = { 2205 { .compatible = "qca,qca8327", .data = &qca8327 }, 2206 { .compatible = "qca,qca8328", .data = &qca8328 }, 2207 { .compatible = "qca,qca8334", .data = &qca833x }, 2208 { .compatible = "qca,qca8337", .data = &qca833x }, 2209 { /* sentinel */ }, 2210 }; 2211 2212 static struct mdio_driver qca8kmdio_driver = { 2213 .probe = qca8k_sw_probe, 2214 .remove = qca8k_sw_remove, 2215 .shutdown = qca8k_sw_shutdown, 2216 .mdiodrv.driver = { 2217 .name = "qca8k", 2218 .of_match_table = qca8k_of_match, 2219 .pm = &qca8k_pm_ops, 2220 }, 2221 }; 2222 2223 mdio_module_driver(qca8kmdio_driver); 2224 2225 MODULE_AUTHOR("Mathieu Olivari, John Crispin <john@phrozen.org>"); 2226 MODULE_DESCRIPTION("Driver for QCA8K ethernet switch family"); 2227 MODULE_LICENSE("GPL v2"); 2228 MODULE_ALIAS("platform:qca8k"); 2229