xref: /linux/drivers/net/dsa/mt7530.c (revision f8b8b1cd5aadd221742b45eb0ee3c8a80abf036a)
1 /*
2  * Mediatek MT7530 DSA Switch driver
3  * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
4  *
5  * This program is free software; you can redistribute it and/or modify
6  * it under the terms of the GNU General Public License version 2 as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  * GNU General Public License for more details.
13  */
14 #include <linux/etherdevice.h>
15 #include <linux/if_bridge.h>
16 #include <linux/iopoll.h>
17 #include <linux/mdio.h>
18 #include <linux/mfd/syscon.h>
19 #include <linux/module.h>
20 #include <linux/netdevice.h>
21 #include <linux/of_gpio.h>
22 #include <linux/of_mdio.h>
23 #include <linux/of_net.h>
24 #include <linux/of_platform.h>
25 #include <linux/phy.h>
26 #include <linux/regmap.h>
27 #include <linux/regulator/consumer.h>
28 #include <linux/reset.h>
29 #include <linux/gpio/consumer.h>
30 #include <net/dsa.h>
31 
32 #include "mt7530.h"
33 
34 /* String, offset, and register size in bytes if different from 4 bytes */
35 static const struct mt7530_mib_desc mt7530_mib[] = {
36 	MIB_DESC(1, 0x00, "TxDrop"),
37 	MIB_DESC(1, 0x04, "TxCrcErr"),
38 	MIB_DESC(1, 0x08, "TxUnicast"),
39 	MIB_DESC(1, 0x0c, "TxMulticast"),
40 	MIB_DESC(1, 0x10, "TxBroadcast"),
41 	MIB_DESC(1, 0x14, "TxCollision"),
42 	MIB_DESC(1, 0x18, "TxSingleCollision"),
43 	MIB_DESC(1, 0x1c, "TxMultipleCollision"),
44 	MIB_DESC(1, 0x20, "TxDeferred"),
45 	MIB_DESC(1, 0x24, "TxLateCollision"),
46 	MIB_DESC(1, 0x28, "TxExcessiveCollistion"),
47 	MIB_DESC(1, 0x2c, "TxPause"),
48 	MIB_DESC(1, 0x30, "TxPktSz64"),
49 	MIB_DESC(1, 0x34, "TxPktSz65To127"),
50 	MIB_DESC(1, 0x38, "TxPktSz128To255"),
51 	MIB_DESC(1, 0x3c, "TxPktSz256To511"),
52 	MIB_DESC(1, 0x40, "TxPktSz512To1023"),
53 	MIB_DESC(1, 0x44, "Tx1024ToMax"),
54 	MIB_DESC(2, 0x48, "TxBytes"),
55 	MIB_DESC(1, 0x60, "RxDrop"),
56 	MIB_DESC(1, 0x64, "RxFiltering"),
57 	MIB_DESC(1, 0x6c, "RxMulticast"),
58 	MIB_DESC(1, 0x70, "RxBroadcast"),
59 	MIB_DESC(1, 0x74, "RxAlignErr"),
60 	MIB_DESC(1, 0x78, "RxCrcErr"),
61 	MIB_DESC(1, 0x7c, "RxUnderSizeErr"),
62 	MIB_DESC(1, 0x80, "RxFragErr"),
63 	MIB_DESC(1, 0x84, "RxOverSzErr"),
64 	MIB_DESC(1, 0x88, "RxJabberErr"),
65 	MIB_DESC(1, 0x8c, "RxPause"),
66 	MIB_DESC(1, 0x90, "RxPktSz64"),
67 	MIB_DESC(1, 0x94, "RxPktSz65To127"),
68 	MIB_DESC(1, 0x98, "RxPktSz128To255"),
69 	MIB_DESC(1, 0x9c, "RxPktSz256To511"),
70 	MIB_DESC(1, 0xa0, "RxPktSz512To1023"),
71 	MIB_DESC(1, 0xa4, "RxPktSz1024ToMax"),
72 	MIB_DESC(2, 0xa8, "RxBytes"),
73 	MIB_DESC(1, 0xb0, "RxCtrlDrop"),
74 	MIB_DESC(1, 0xb4, "RxIngressDrop"),
75 	MIB_DESC(1, 0xb8, "RxArlDrop"),
76 };
77 
78 static int
79 mt7623_trgmii_write(struct mt7530_priv *priv,  u32 reg, u32 val)
80 {
81 	int ret;
82 
83 	ret =  regmap_write(priv->ethernet, TRGMII_BASE(reg), val);
84 	if (ret < 0)
85 		dev_err(priv->dev,
86 			"failed to priv write register\n");
87 	return ret;
88 }
89 
90 static u32
91 mt7623_trgmii_read(struct mt7530_priv *priv, u32 reg)
92 {
93 	int ret;
94 	u32 val;
95 
96 	ret = regmap_read(priv->ethernet, TRGMII_BASE(reg), &val);
97 	if (ret < 0) {
98 		dev_err(priv->dev,
99 			"failed to priv read register\n");
100 		return ret;
101 	}
102 
103 	return val;
104 }
105 
106 static void
107 mt7623_trgmii_rmw(struct mt7530_priv *priv, u32 reg,
108 		  u32 mask, u32 set)
109 {
110 	u32 val;
111 
112 	val = mt7623_trgmii_read(priv, reg);
113 	val &= ~mask;
114 	val |= set;
115 	mt7623_trgmii_write(priv, reg, val);
116 }
117 
118 static void
119 mt7623_trgmii_set(struct mt7530_priv *priv, u32 reg, u32 val)
120 {
121 	mt7623_trgmii_rmw(priv, reg, 0, val);
122 }
123 
124 static void
125 mt7623_trgmii_clear(struct mt7530_priv *priv, u32 reg, u32 val)
126 {
127 	mt7623_trgmii_rmw(priv, reg, val, 0);
128 }
129 
130 static int
131 core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
132 {
133 	struct mii_bus *bus = priv->bus;
134 	int value, ret;
135 
136 	/* Write the desired MMD Devad */
137 	ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
138 	if (ret < 0)
139 		goto err;
140 
141 	/* Write the desired MMD register address */
142 	ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
143 	if (ret < 0)
144 		goto err;
145 
146 	/* Select the Function : DATA with no post increment */
147 	ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
148 	if (ret < 0)
149 		goto err;
150 
151 	/* Read the content of the MMD's selected register */
152 	value = bus->read(bus, 0, MII_MMD_DATA);
153 
154 	return value;
155 err:
156 	dev_err(&bus->dev,  "failed to read mmd register\n");
157 
158 	return ret;
159 }
160 
161 static int
162 core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
163 			int devad, u32 data)
164 {
165 	struct mii_bus *bus = priv->bus;
166 	int ret;
167 
168 	/* Write the desired MMD Devad */
169 	ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
170 	if (ret < 0)
171 		goto err;
172 
173 	/* Write the desired MMD register address */
174 	ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
175 	if (ret < 0)
176 		goto err;
177 
178 	/* Select the Function : DATA with no post increment */
179 	ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
180 	if (ret < 0)
181 		goto err;
182 
183 	/* Write the data into MMD's selected register */
184 	ret = bus->write(bus, 0, MII_MMD_DATA, data);
185 err:
186 	if (ret < 0)
187 		dev_err(&bus->dev,
188 			"failed to write mmd register\n");
189 	return ret;
190 }
191 
192 static void
193 core_write(struct mt7530_priv *priv, u32 reg, u32 val)
194 {
195 	struct mii_bus *bus = priv->bus;
196 
197 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
198 
199 	core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
200 
201 	mutex_unlock(&bus->mdio_lock);
202 }
203 
204 static void
205 core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
206 {
207 	struct mii_bus *bus = priv->bus;
208 	u32 val;
209 
210 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
211 
212 	val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
213 	val &= ~mask;
214 	val |= set;
215 	core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
216 
217 	mutex_unlock(&bus->mdio_lock);
218 }
219 
220 static void
221 core_set(struct mt7530_priv *priv, u32 reg, u32 val)
222 {
223 	core_rmw(priv, reg, 0, val);
224 }
225 
226 static void
227 core_clear(struct mt7530_priv *priv, u32 reg, u32 val)
228 {
229 	core_rmw(priv, reg, val, 0);
230 }
231 
232 static int
233 mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
234 {
235 	struct mii_bus *bus = priv->bus;
236 	u16 page, r, lo, hi;
237 	int ret;
238 
239 	page = (reg >> 6) & 0x3ff;
240 	r  = (reg >> 2) & 0xf;
241 	lo = val & 0xffff;
242 	hi = val >> 16;
243 
244 	/* MT7530 uses 31 as the pseudo port */
245 	ret = bus->write(bus, 0x1f, 0x1f, page);
246 	if (ret < 0)
247 		goto err;
248 
249 	ret = bus->write(bus, 0x1f, r,  lo);
250 	if (ret < 0)
251 		goto err;
252 
253 	ret = bus->write(bus, 0x1f, 0x10, hi);
254 err:
255 	if (ret < 0)
256 		dev_err(&bus->dev,
257 			"failed to write mt7530 register\n");
258 	return ret;
259 }
260 
261 static u32
262 mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
263 {
264 	struct mii_bus *bus = priv->bus;
265 	u16 page, r, lo, hi;
266 	int ret;
267 
268 	page = (reg >> 6) & 0x3ff;
269 	r = (reg >> 2) & 0xf;
270 
271 	/* MT7530 uses 31 as the pseudo port */
272 	ret = bus->write(bus, 0x1f, 0x1f, page);
273 	if (ret < 0) {
274 		dev_err(&bus->dev,
275 			"failed to read mt7530 register\n");
276 		return ret;
277 	}
278 
279 	lo = bus->read(bus, 0x1f, r);
280 	hi = bus->read(bus, 0x1f, 0x10);
281 
282 	return (hi << 16) | (lo & 0xffff);
283 }
284 
285 static void
286 mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val)
287 {
288 	struct mii_bus *bus = priv->bus;
289 
290 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
291 
292 	mt7530_mii_write(priv, reg, val);
293 
294 	mutex_unlock(&bus->mdio_lock);
295 }
296 
297 static u32
298 _mt7530_read(struct mt7530_dummy_poll *p)
299 {
300 	struct mii_bus		*bus = p->priv->bus;
301 	u32 val;
302 
303 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
304 
305 	val = mt7530_mii_read(p->priv, p->reg);
306 
307 	mutex_unlock(&bus->mdio_lock);
308 
309 	return val;
310 }
311 
312 static u32
313 mt7530_read(struct mt7530_priv *priv, u32 reg)
314 {
315 	struct mt7530_dummy_poll p;
316 
317 	INIT_MT7530_DUMMY_POLL(&p, priv, reg);
318 	return _mt7530_read(&p);
319 }
320 
321 static void
322 mt7530_rmw(struct mt7530_priv *priv, u32 reg,
323 	   u32 mask, u32 set)
324 {
325 	struct mii_bus *bus = priv->bus;
326 	u32 val;
327 
328 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
329 
330 	val = mt7530_mii_read(priv, reg);
331 	val &= ~mask;
332 	val |= set;
333 	mt7530_mii_write(priv, reg, val);
334 
335 	mutex_unlock(&bus->mdio_lock);
336 }
337 
338 static void
339 mt7530_set(struct mt7530_priv *priv, u32 reg, u32 val)
340 {
341 	mt7530_rmw(priv, reg, 0, val);
342 }
343 
344 static void
345 mt7530_clear(struct mt7530_priv *priv, u32 reg, u32 val)
346 {
347 	mt7530_rmw(priv, reg, val, 0);
348 }
349 
350 static int
351 mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp)
352 {
353 	u32 val;
354 	int ret;
355 	struct mt7530_dummy_poll p;
356 
357 	/* Set the command operating upon the MAC address entries */
358 	val = ATC_BUSY | ATC_MAT(0) | cmd;
359 	mt7530_write(priv, MT7530_ATC, val);
360 
361 	INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_ATC);
362 	ret = readx_poll_timeout(_mt7530_read, &p, val,
363 				 !(val & ATC_BUSY), 20, 20000);
364 	if (ret < 0) {
365 		dev_err(priv->dev, "reset timeout\n");
366 		return ret;
367 	}
368 
369 	/* Additional sanity for read command if the specified
370 	 * entry is invalid
371 	 */
372 	val = mt7530_read(priv, MT7530_ATC);
373 	if ((cmd == MT7530_FDB_READ) && (val & ATC_INVALID))
374 		return -EINVAL;
375 
376 	if (rsp)
377 		*rsp = val;
378 
379 	return 0;
380 }
381 
382 static void
383 mt7530_fdb_read(struct mt7530_priv *priv, struct mt7530_fdb *fdb)
384 {
385 	u32 reg[3];
386 	int i;
387 
388 	/* Read from ARL table into an array */
389 	for (i = 0; i < 3; i++) {
390 		reg[i] = mt7530_read(priv, MT7530_TSRA1 + (i * 4));
391 
392 		dev_dbg(priv->dev, "%s(%d) reg[%d]=0x%x\n",
393 			__func__, __LINE__, i, reg[i]);
394 	}
395 
396 	fdb->vid = (reg[1] >> CVID) & CVID_MASK;
397 	fdb->aging = (reg[2] >> AGE_TIMER) & AGE_TIMER_MASK;
398 	fdb->port_mask = (reg[2] >> PORT_MAP) & PORT_MAP_MASK;
399 	fdb->mac[0] = (reg[0] >> MAC_BYTE_0) & MAC_BYTE_MASK;
400 	fdb->mac[1] = (reg[0] >> MAC_BYTE_1) & MAC_BYTE_MASK;
401 	fdb->mac[2] = (reg[0] >> MAC_BYTE_2) & MAC_BYTE_MASK;
402 	fdb->mac[3] = (reg[0] >> MAC_BYTE_3) & MAC_BYTE_MASK;
403 	fdb->mac[4] = (reg[1] >> MAC_BYTE_4) & MAC_BYTE_MASK;
404 	fdb->mac[5] = (reg[1] >> MAC_BYTE_5) & MAC_BYTE_MASK;
405 	fdb->noarp = ((reg[2] >> ENT_STATUS) & ENT_STATUS_MASK) == STATIC_ENT;
406 }
407 
408 static void
409 mt7530_fdb_write(struct mt7530_priv *priv, u16 vid,
410 		 u8 port_mask, const u8 *mac,
411 		 u8 aging, u8 type)
412 {
413 	u32 reg[3] = { 0 };
414 	int i;
415 
416 	reg[1] |= vid & CVID_MASK;
417 	reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER;
418 	reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP;
419 	/* STATIC_ENT indicate that entry is static wouldn't
420 	 * be aged out and STATIC_EMP specified as erasing an
421 	 * entry
422 	 */
423 	reg[2] |= (type & ENT_STATUS_MASK) << ENT_STATUS;
424 	reg[1] |= mac[5] << MAC_BYTE_5;
425 	reg[1] |= mac[4] << MAC_BYTE_4;
426 	reg[0] |= mac[3] << MAC_BYTE_3;
427 	reg[0] |= mac[2] << MAC_BYTE_2;
428 	reg[0] |= mac[1] << MAC_BYTE_1;
429 	reg[0] |= mac[0] << MAC_BYTE_0;
430 
431 	/* Write array into the ARL table */
432 	for (i = 0; i < 3; i++)
433 		mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]);
434 }
435 
436 static int
437 mt7530_pad_clk_setup(struct dsa_switch *ds, int mode)
438 {
439 	struct mt7530_priv *priv = ds->priv;
440 	u32 ncpo1, ssc_delta, trgint, i;
441 
442 	switch (mode) {
443 	case PHY_INTERFACE_MODE_RGMII:
444 		trgint = 0;
445 		ncpo1 = 0x0c80;
446 		ssc_delta = 0x87;
447 		break;
448 	case PHY_INTERFACE_MODE_TRGMII:
449 		trgint = 1;
450 		ncpo1 = 0x1400;
451 		ssc_delta = 0x57;
452 		break;
453 	default:
454 		dev_err(priv->dev, "xMII mode %d not supported\n", mode);
455 		return -EINVAL;
456 	}
457 
458 	mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
459 		   P6_INTF_MODE(trgint));
460 
461 	/* Lower Tx Driving for TRGMII path */
462 	for (i = 0 ; i < NUM_TRGMII_CTRL ; i++)
463 		mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
464 			     TD_DM_DRVP(8) | TD_DM_DRVN(8));
465 
466 	/* Setup core clock for MT7530 */
467 	if (!trgint) {
468 		/* Disable MT7530 core clock */
469 		core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
470 
471 		/* Disable PLL, since phy_device has not yet been created
472 		 * provided for phy_[read,write]_mmd_indirect is called, we
473 		 * provide our own core_write_mmd_indirect to complete this
474 		 * function.
475 		 */
476 		core_write_mmd_indirect(priv,
477 					CORE_GSWPLL_GRP1,
478 					MDIO_MMD_VEND2,
479 					0);
480 
481 		/* Set core clock into 500Mhz */
482 		core_write(priv, CORE_GSWPLL_GRP2,
483 			   RG_GSWPLL_POSDIV_500M(1) |
484 			   RG_GSWPLL_FBKDIV_500M(25));
485 
486 		/* Enable PLL */
487 		core_write(priv, CORE_GSWPLL_GRP1,
488 			   RG_GSWPLL_EN_PRE |
489 			   RG_GSWPLL_POSDIV_200M(2) |
490 			   RG_GSWPLL_FBKDIV_200M(32));
491 
492 		/* Enable MT7530 core clock */
493 		core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
494 	}
495 
496 	/* Setup the MT7530 TRGMII Tx Clock */
497 	core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
498 	core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1));
499 	core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0));
500 	core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta));
501 	core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta));
502 	core_write(priv, CORE_PLL_GROUP4,
503 		   RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN |
504 		   RG_SYSPLL_BIAS_LPF_EN);
505 	core_write(priv, CORE_PLL_GROUP2,
506 		   RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN |
507 		   RG_SYSPLL_POSDIV(1));
508 	core_write(priv, CORE_PLL_GROUP7,
509 		   RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) |
510 		   RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
511 	core_set(priv, CORE_TRGMII_GSW_CLK_CG,
512 		 REG_GSWCK_EN | REG_TRGMIICK_EN);
513 
514 	if (!trgint)
515 		for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
516 			mt7530_rmw(priv, MT7530_TRGMII_RD(i),
517 				   RD_TAP_MASK, RD_TAP(16));
518 	else
519 		mt7623_trgmii_set(priv, GSW_INTF_MODE, INTF_MODE_TRGMII);
520 
521 	return 0;
522 }
523 
524 static int
525 mt7623_pad_clk_setup(struct dsa_switch *ds)
526 {
527 	struct mt7530_priv *priv = ds->priv;
528 	int i;
529 
530 	for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
531 		mt7623_trgmii_write(priv, GSW_TRGMII_TD_ODT(i),
532 				    TD_DM_DRVP(8) | TD_DM_DRVN(8));
533 
534 	mt7623_trgmii_set(priv, GSW_TRGMII_RCK_CTRL, RX_RST | RXC_DQSISEL);
535 	mt7623_trgmii_clear(priv, GSW_TRGMII_RCK_CTRL, RX_RST);
536 
537 	return 0;
538 }
539 
540 static void
541 mt7530_mib_reset(struct dsa_switch *ds)
542 {
543 	struct mt7530_priv *priv = ds->priv;
544 
545 	mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_FLUSH);
546 	mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);
547 }
548 
549 static void
550 mt7530_port_set_status(struct mt7530_priv *priv, int port, int enable)
551 {
552 	u32 mask = PMCR_TX_EN | PMCR_RX_EN;
553 
554 	if (enable)
555 		mt7530_set(priv, MT7530_PMCR_P(port), mask);
556 	else
557 		mt7530_clear(priv, MT7530_PMCR_P(port), mask);
558 }
559 
560 static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum)
561 {
562 	struct mt7530_priv *priv = ds->priv;
563 
564 	return mdiobus_read_nested(priv->bus, port, regnum);
565 }
566 
567 static int mt7530_phy_write(struct dsa_switch *ds, int port, int regnum,
568 			    u16 val)
569 {
570 	struct mt7530_priv *priv = ds->priv;
571 
572 	return mdiobus_write_nested(priv->bus, port, regnum, val);
573 }
574 
575 static void
576 mt7530_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
577 {
578 	int i;
579 
580 	for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++)
581 		strncpy(data + i * ETH_GSTRING_LEN, mt7530_mib[i].name,
582 			ETH_GSTRING_LEN);
583 }
584 
585 static void
586 mt7530_get_ethtool_stats(struct dsa_switch *ds, int port,
587 			 uint64_t *data)
588 {
589 	struct mt7530_priv *priv = ds->priv;
590 	const struct mt7530_mib_desc *mib;
591 	u32 reg, i;
592 	u64 hi;
593 
594 	for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) {
595 		mib = &mt7530_mib[i];
596 		reg = MT7530_PORT_MIB_COUNTER(port) + mib->offset;
597 
598 		data[i] = mt7530_read(priv, reg);
599 		if (mib->size == 2) {
600 			hi = mt7530_read(priv, reg + 4);
601 			data[i] |= hi << 32;
602 		}
603 	}
604 }
605 
606 static int
607 mt7530_get_sset_count(struct dsa_switch *ds)
608 {
609 	return ARRAY_SIZE(mt7530_mib);
610 }
611 
612 static void mt7530_adjust_link(struct dsa_switch *ds, int port,
613 			       struct phy_device *phydev)
614 {
615 	struct mt7530_priv *priv = ds->priv;
616 
617 	if (phy_is_pseudo_fixed_link(phydev)) {
618 		dev_dbg(priv->dev, "phy-mode for master device = %x\n",
619 			phydev->interface);
620 
621 		/* Setup TX circuit incluing relevant PAD and driving */
622 		mt7530_pad_clk_setup(ds, phydev->interface);
623 
624 		/* Setup RX circuit, relevant PAD and driving on the host
625 		 * which must be placed after the setup on the device side is
626 		 * all finished.
627 		 */
628 		mt7623_pad_clk_setup(ds);
629 	} else {
630 		u16 lcl_adv = 0, rmt_adv = 0;
631 		u8 flowctrl;
632 		u32 mcr = PMCR_USERP_LINK | PMCR_FORCE_MODE;
633 
634 		switch (phydev->speed) {
635 		case SPEED_1000:
636 			mcr |= PMCR_FORCE_SPEED_1000;
637 			break;
638 		case SPEED_100:
639 			mcr |= PMCR_FORCE_SPEED_100;
640 			break;
641 		};
642 
643 		if (phydev->link)
644 			mcr |= PMCR_FORCE_LNK;
645 
646 		if (phydev->duplex) {
647 			mcr |= PMCR_FORCE_FDX;
648 
649 			if (phydev->pause)
650 				rmt_adv = LPA_PAUSE_CAP;
651 			if (phydev->asym_pause)
652 				rmt_adv |= LPA_PAUSE_ASYM;
653 
654 			if (phydev->advertising & ADVERTISED_Pause)
655 				lcl_adv |= ADVERTISE_PAUSE_CAP;
656 			if (phydev->advertising & ADVERTISED_Asym_Pause)
657 				lcl_adv |= ADVERTISE_PAUSE_ASYM;
658 
659 			flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
660 
661 			if (flowctrl & FLOW_CTRL_TX)
662 				mcr |= PMCR_TX_FC_EN;
663 			if (flowctrl & FLOW_CTRL_RX)
664 				mcr |= PMCR_RX_FC_EN;
665 		}
666 		mt7530_write(priv, MT7530_PMCR_P(port), mcr);
667 	}
668 }
669 
670 static int
671 mt7530_cpu_port_enable(struct mt7530_priv *priv,
672 		       int port)
673 {
674 	/* Enable Mediatek header mode on the cpu port */
675 	mt7530_write(priv, MT7530_PVC_P(port),
676 		     PORT_SPEC_TAG);
677 
678 	/* Setup the MAC by default for the cpu port */
679 	mt7530_write(priv, MT7530_PMCR_P(port), PMCR_CPUP_LINK);
680 
681 	/* Disable auto learning on the cpu port */
682 	mt7530_set(priv, MT7530_PSC_P(port), SA_DIS);
683 
684 	/* Unknown unicast frame fordwarding to the cpu port */
685 	mt7530_set(priv, MT7530_MFC, UNU_FFP(BIT(port)));
686 
687 	/* CPU port gets connected to all user ports of
688 	 * the switch
689 	 */
690 	mt7530_write(priv, MT7530_PCR_P(port),
691 		     PCR_MATRIX(priv->ds->enabled_port_mask));
692 
693 	return 0;
694 }
695 
696 static int
697 mt7530_port_enable(struct dsa_switch *ds, int port,
698 		   struct phy_device *phy)
699 {
700 	struct mt7530_priv *priv = ds->priv;
701 
702 	mutex_lock(&priv->reg_mutex);
703 
704 	/* Setup the MAC for the user port */
705 	mt7530_write(priv, MT7530_PMCR_P(port), PMCR_USERP_LINK);
706 
707 	/* Allow the user port gets connected to the cpu port and also
708 	 * restore the port matrix if the port is the member of a certain
709 	 * bridge.
710 	 */
711 	priv->ports[port].pm |= PCR_MATRIX(BIT(MT7530_CPU_PORT));
712 	priv->ports[port].enable = true;
713 	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
714 		   priv->ports[port].pm);
715 	mt7530_port_set_status(priv, port, 1);
716 
717 	mutex_unlock(&priv->reg_mutex);
718 
719 	return 0;
720 }
721 
722 static void
723 mt7530_port_disable(struct dsa_switch *ds, int port,
724 		    struct phy_device *phy)
725 {
726 	struct mt7530_priv *priv = ds->priv;
727 
728 	mutex_lock(&priv->reg_mutex);
729 
730 	/* Clear up all port matrix which could be restored in the next
731 	 * enablement for the port.
732 	 */
733 	priv->ports[port].enable = false;
734 	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
735 		   PCR_MATRIX_CLR);
736 	mt7530_port_set_status(priv, port, 0);
737 
738 	mutex_unlock(&priv->reg_mutex);
739 }
740 
741 static void
742 mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state)
743 {
744 	struct mt7530_priv *priv = ds->priv;
745 	u32 stp_state;
746 
747 	switch (state) {
748 	case BR_STATE_DISABLED:
749 		stp_state = MT7530_STP_DISABLED;
750 		break;
751 	case BR_STATE_BLOCKING:
752 		stp_state = MT7530_STP_BLOCKING;
753 		break;
754 	case BR_STATE_LISTENING:
755 		stp_state = MT7530_STP_LISTENING;
756 		break;
757 	case BR_STATE_LEARNING:
758 		stp_state = MT7530_STP_LEARNING;
759 		break;
760 	case BR_STATE_FORWARDING:
761 	default:
762 		stp_state = MT7530_STP_FORWARDING;
763 		break;
764 	}
765 
766 	mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK, stp_state);
767 }
768 
769 static int
770 mt7530_port_bridge_join(struct dsa_switch *ds, int port,
771 			struct net_device *bridge)
772 {
773 	struct mt7530_priv *priv = ds->priv;
774 	u32 port_bitmap = BIT(MT7530_CPU_PORT);
775 	int i;
776 
777 	mutex_lock(&priv->reg_mutex);
778 
779 	for (i = 0; i < MT7530_NUM_PORTS; i++) {
780 		/* Add this port to the port matrix of the other ports in the
781 		 * same bridge. If the port is disabled, port matrix is kept
782 		 * and not being setup until the port becomes enabled.
783 		 */
784 		if (ds->enabled_port_mask & BIT(i) && i != port) {
785 			if (ds->ports[i].bridge_dev != bridge)
786 				continue;
787 			if (priv->ports[i].enable)
788 				mt7530_set(priv, MT7530_PCR_P(i),
789 					   PCR_MATRIX(BIT(port)));
790 			priv->ports[i].pm |= PCR_MATRIX(BIT(port));
791 
792 			port_bitmap |= BIT(i);
793 		}
794 	}
795 
796 	/* Add the all other ports to this port matrix. */
797 	if (priv->ports[port].enable)
798 		mt7530_rmw(priv, MT7530_PCR_P(port),
799 			   PCR_MATRIX_MASK, PCR_MATRIX(port_bitmap));
800 	priv->ports[port].pm |= PCR_MATRIX(port_bitmap);
801 
802 	mutex_unlock(&priv->reg_mutex);
803 
804 	return 0;
805 }
806 
807 static void
808 mt7530_port_bridge_leave(struct dsa_switch *ds, int port,
809 			 struct net_device *bridge)
810 {
811 	struct mt7530_priv *priv = ds->priv;
812 	int i;
813 
814 	mutex_lock(&priv->reg_mutex);
815 
816 	for (i = 0; i < MT7530_NUM_PORTS; i++) {
817 		/* Remove this port from the port matrix of the other ports
818 		 * in the same bridge. If the port is disabled, port matrix
819 		 * is kept and not being setup until the port becomes enabled.
820 		 */
821 		if (ds->enabled_port_mask & BIT(i) && i != port) {
822 			if (ds->ports[i].bridge_dev != bridge)
823 				continue;
824 			if (priv->ports[i].enable)
825 				mt7530_clear(priv, MT7530_PCR_P(i),
826 					     PCR_MATRIX(BIT(port)));
827 			priv->ports[i].pm &= ~PCR_MATRIX(BIT(port));
828 		}
829 	}
830 
831 	/* Set the cpu port to be the only one in the port matrix of
832 	 * this port.
833 	 */
834 	if (priv->ports[port].enable)
835 		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
836 			   PCR_MATRIX(BIT(MT7530_CPU_PORT)));
837 	priv->ports[port].pm = PCR_MATRIX(BIT(MT7530_CPU_PORT));
838 
839 	mutex_unlock(&priv->reg_mutex);
840 }
841 
842 static int
843 mt7530_port_fdb_add(struct dsa_switch *ds, int port,
844 		    const unsigned char *addr, u16 vid)
845 {
846 	struct mt7530_priv *priv = ds->priv;
847 	int ret;
848 	u8 port_mask = BIT(port);
849 
850 	mutex_lock(&priv->reg_mutex);
851 	mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_ENT);
852 	ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, 0);
853 	mutex_unlock(&priv->reg_mutex);
854 
855 	return ret;
856 }
857 
858 static int
859 mt7530_port_fdb_del(struct dsa_switch *ds, int port,
860 		    const unsigned char *addr, u16 vid)
861 {
862 	struct mt7530_priv *priv = ds->priv;
863 	int ret;
864 	u8 port_mask = BIT(port);
865 
866 	mutex_lock(&priv->reg_mutex);
867 	mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_EMP);
868 	ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, 0);
869 	mutex_unlock(&priv->reg_mutex);
870 
871 	return ret;
872 }
873 
874 static int
875 mt7530_port_fdb_dump(struct dsa_switch *ds, int port,
876 		     dsa_fdb_dump_cb_t *cb, void *data)
877 {
878 	struct mt7530_priv *priv = ds->priv;
879 	struct mt7530_fdb _fdb = { 0 };
880 	int cnt = MT7530_NUM_FDB_RECORDS;
881 	int ret = 0;
882 	u32 rsp = 0;
883 
884 	mutex_lock(&priv->reg_mutex);
885 
886 	ret = mt7530_fdb_cmd(priv, MT7530_FDB_START, &rsp);
887 	if (ret < 0)
888 		goto err;
889 
890 	do {
891 		if (rsp & ATC_SRCH_HIT) {
892 			mt7530_fdb_read(priv, &_fdb);
893 			if (_fdb.port_mask & BIT(port)) {
894 				ret = cb(_fdb.mac, _fdb.vid, _fdb.noarp,
895 					 data);
896 				if (ret < 0)
897 					break;
898 			}
899 		}
900 	} while (--cnt &&
901 		 !(rsp & ATC_SRCH_END) &&
902 		 !mt7530_fdb_cmd(priv, MT7530_FDB_NEXT, &rsp));
903 err:
904 	mutex_unlock(&priv->reg_mutex);
905 
906 	return 0;
907 }
908 
909 static enum dsa_tag_protocol
910 mtk_get_tag_protocol(struct dsa_switch *ds)
911 {
912 	struct mt7530_priv *priv = ds->priv;
913 
914 	if (!dsa_is_cpu_port(ds, MT7530_CPU_PORT)) {
915 		dev_warn(priv->dev,
916 			 "port not matched with tagging CPU port\n");
917 		return DSA_TAG_PROTO_NONE;
918 	} else {
919 		return DSA_TAG_PROTO_MTK;
920 	}
921 }
922 
923 static int
924 mt7530_setup(struct dsa_switch *ds)
925 {
926 	struct mt7530_priv *priv = ds->priv;
927 	int ret, i;
928 	u32 id, val;
929 	struct device_node *dn;
930 	struct mt7530_dummy_poll p;
931 
932 	/* The parent node of master netdev which holds the common system
933 	 * controller also is the container for two GMACs nodes representing
934 	 * as two netdev instances.
935 	 */
936 	dn = ds->ports[MT7530_CPU_PORT].master->dev.of_node->parent;
937 	priv->ethernet = syscon_node_to_regmap(dn);
938 	if (IS_ERR(priv->ethernet))
939 		return PTR_ERR(priv->ethernet);
940 
941 	regulator_set_voltage(priv->core_pwr, 1000000, 1000000);
942 	ret = regulator_enable(priv->core_pwr);
943 	if (ret < 0) {
944 		dev_err(priv->dev,
945 			"Failed to enable core power: %d\n", ret);
946 		return ret;
947 	}
948 
949 	regulator_set_voltage(priv->io_pwr, 3300000, 3300000);
950 	ret = regulator_enable(priv->io_pwr);
951 	if (ret < 0) {
952 		dev_err(priv->dev, "Failed to enable io pwr: %d\n",
953 			ret);
954 		return ret;
955 	}
956 
957 	/* Reset whole chip through gpio pin or memory-mapped registers for
958 	 * different type of hardware
959 	 */
960 	if (priv->mcm) {
961 		reset_control_assert(priv->rstc);
962 		usleep_range(1000, 1100);
963 		reset_control_deassert(priv->rstc);
964 	} else {
965 		gpiod_set_value_cansleep(priv->reset, 0);
966 		usleep_range(1000, 1100);
967 		gpiod_set_value_cansleep(priv->reset, 1);
968 	}
969 
970 	/* Waiting for MT7530 got to stable */
971 	INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
972 	ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
973 				 20, 1000000);
974 	if (ret < 0) {
975 		dev_err(priv->dev, "reset timeout\n");
976 		return ret;
977 	}
978 
979 	id = mt7530_read(priv, MT7530_CREV);
980 	id >>= CHIP_NAME_SHIFT;
981 	if (id != MT7530_ID) {
982 		dev_err(priv->dev, "chip %x can't be supported\n", id);
983 		return -ENODEV;
984 	}
985 
986 	/* Reset the switch through internal reset */
987 	mt7530_write(priv, MT7530_SYS_CTRL,
988 		     SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
989 		     SYS_CTRL_REG_RST);
990 
991 	/* Enable Port 6 only; P5 as GMAC5 which currently is not supported */
992 	val = mt7530_read(priv, MT7530_MHWTRAP);
993 	val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
994 	val |= MHWTRAP_MANUAL;
995 	mt7530_write(priv, MT7530_MHWTRAP, val);
996 
997 	/* Enable and reset MIB counters */
998 	mt7530_mib_reset(ds);
999 
1000 	mt7530_clear(priv, MT7530_MFC, UNU_FFP_MASK);
1001 
1002 	for (i = 0; i < MT7530_NUM_PORTS; i++) {
1003 		/* Disable forwarding by default on all ports */
1004 		mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
1005 			   PCR_MATRIX_CLR);
1006 
1007 		if (dsa_is_cpu_port(ds, i))
1008 			mt7530_cpu_port_enable(priv, i);
1009 		else
1010 			mt7530_port_disable(ds, i, NULL);
1011 	}
1012 
1013 	/* Flush the FDB table */
1014 	ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, 0);
1015 	if (ret < 0)
1016 		return ret;
1017 
1018 	return 0;
1019 }
1020 
1021 static const struct dsa_switch_ops mt7530_switch_ops = {
1022 	.get_tag_protocol	= mtk_get_tag_protocol,
1023 	.setup			= mt7530_setup,
1024 	.get_strings		= mt7530_get_strings,
1025 	.phy_read		= mt7530_phy_read,
1026 	.phy_write		= mt7530_phy_write,
1027 	.get_ethtool_stats	= mt7530_get_ethtool_stats,
1028 	.get_sset_count		= mt7530_get_sset_count,
1029 	.adjust_link		= mt7530_adjust_link,
1030 	.port_enable		= mt7530_port_enable,
1031 	.port_disable		= mt7530_port_disable,
1032 	.port_stp_state_set	= mt7530_stp_state_set,
1033 	.port_bridge_join	= mt7530_port_bridge_join,
1034 	.port_bridge_leave	= mt7530_port_bridge_leave,
1035 	.port_fdb_add		= mt7530_port_fdb_add,
1036 	.port_fdb_del		= mt7530_port_fdb_del,
1037 	.port_fdb_dump		= mt7530_port_fdb_dump,
1038 };
1039 
1040 static int
1041 mt7530_probe(struct mdio_device *mdiodev)
1042 {
1043 	struct mt7530_priv *priv;
1044 	struct device_node *dn;
1045 
1046 	dn = mdiodev->dev.of_node;
1047 
1048 	priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
1049 	if (!priv)
1050 		return -ENOMEM;
1051 
1052 	priv->ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS);
1053 	if (!priv->ds)
1054 		return -ENOMEM;
1055 
1056 	/* Use medatek,mcm property to distinguish hardware type that would
1057 	 * casues a little bit differences on power-on sequence.
1058 	 */
1059 	priv->mcm = of_property_read_bool(dn, "mediatek,mcm");
1060 	if (priv->mcm) {
1061 		dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n");
1062 
1063 		priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm");
1064 		if (IS_ERR(priv->rstc)) {
1065 			dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
1066 			return PTR_ERR(priv->rstc);
1067 		}
1068 	}
1069 
1070 	priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
1071 	if (IS_ERR(priv->core_pwr))
1072 		return PTR_ERR(priv->core_pwr);
1073 
1074 	priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
1075 	if (IS_ERR(priv->io_pwr))
1076 		return PTR_ERR(priv->io_pwr);
1077 
1078 	/* Not MCM that indicates switch works as the remote standalone
1079 	 * integrated circuit so the GPIO pin would be used to complete
1080 	 * the reset, otherwise memory-mapped register accessing used
1081 	 * through syscon provides in the case of MCM.
1082 	 */
1083 	if (!priv->mcm) {
1084 		priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset",
1085 						      GPIOD_OUT_LOW);
1086 		if (IS_ERR(priv->reset)) {
1087 			dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
1088 			return PTR_ERR(priv->reset);
1089 		}
1090 	}
1091 
1092 	priv->bus = mdiodev->bus;
1093 	priv->dev = &mdiodev->dev;
1094 	priv->ds->priv = priv;
1095 	priv->ds->ops = &mt7530_switch_ops;
1096 	mutex_init(&priv->reg_mutex);
1097 	dev_set_drvdata(&mdiodev->dev, priv);
1098 
1099 	return dsa_register_switch(priv->ds);
1100 }
1101 
1102 static void
1103 mt7530_remove(struct mdio_device *mdiodev)
1104 {
1105 	struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
1106 	int ret = 0;
1107 
1108 	ret = regulator_disable(priv->core_pwr);
1109 	if (ret < 0)
1110 		dev_err(priv->dev,
1111 			"Failed to disable core power: %d\n", ret);
1112 
1113 	ret = regulator_disable(priv->io_pwr);
1114 	if (ret < 0)
1115 		dev_err(priv->dev, "Failed to disable io pwr: %d\n",
1116 			ret);
1117 
1118 	dsa_unregister_switch(priv->ds);
1119 	mutex_destroy(&priv->reg_mutex);
1120 }
1121 
1122 static const struct of_device_id mt7530_of_match[] = {
1123 	{ .compatible = "mediatek,mt7530" },
1124 	{ /* sentinel */ },
1125 };
1126 
1127 static struct mdio_driver mt7530_mdio_driver = {
1128 	.probe  = mt7530_probe,
1129 	.remove = mt7530_remove,
1130 	.mdiodrv.driver = {
1131 		.name = "mt7530",
1132 		.of_match_table = mt7530_of_match,
1133 	},
1134 };
1135 
1136 mdio_module_driver(mt7530_mdio_driver);
1137 
1138 MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
1139 MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch");
1140 MODULE_LICENSE("GPL");
1141 MODULE_ALIAS("platform:mediatek-mt7530");
1142