1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Mediatek MT7530 DSA Switch driver 4 * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com> 5 */ 6 #include <linux/etherdevice.h> 7 #include <linux/if_bridge.h> 8 #include <linux/iopoll.h> 9 #include <linux/mdio.h> 10 #include <linux/mfd/syscon.h> 11 #include <linux/module.h> 12 #include <linux/netdevice.h> 13 #include <linux/of_mdio.h> 14 #include <linux/of_net.h> 15 #include <linux/of_platform.h> 16 #include <linux/phylink.h> 17 #include <linux/regmap.h> 18 #include <linux/regulator/consumer.h> 19 #include <linux/reset.h> 20 #include <linux/gpio/consumer.h> 21 #include <net/dsa.h> 22 23 #include "mt7530.h" 24 25 /* String, offset, and register size in bytes if different from 4 bytes */ 26 static const struct mt7530_mib_desc mt7530_mib[] = { 27 MIB_DESC(1, 0x00, "TxDrop"), 28 MIB_DESC(1, 0x04, "TxCrcErr"), 29 MIB_DESC(1, 0x08, "TxUnicast"), 30 MIB_DESC(1, 0x0c, "TxMulticast"), 31 MIB_DESC(1, 0x10, "TxBroadcast"), 32 MIB_DESC(1, 0x14, "TxCollision"), 33 MIB_DESC(1, 0x18, "TxSingleCollision"), 34 MIB_DESC(1, 0x1c, "TxMultipleCollision"), 35 MIB_DESC(1, 0x20, "TxDeferred"), 36 MIB_DESC(1, 0x24, "TxLateCollision"), 37 MIB_DESC(1, 0x28, "TxExcessiveCollistion"), 38 MIB_DESC(1, 0x2c, "TxPause"), 39 MIB_DESC(1, 0x30, "TxPktSz64"), 40 MIB_DESC(1, 0x34, "TxPktSz65To127"), 41 MIB_DESC(1, 0x38, "TxPktSz128To255"), 42 MIB_DESC(1, 0x3c, "TxPktSz256To511"), 43 MIB_DESC(1, 0x40, "TxPktSz512To1023"), 44 MIB_DESC(1, 0x44, "Tx1024ToMax"), 45 MIB_DESC(2, 0x48, "TxBytes"), 46 MIB_DESC(1, 0x60, "RxDrop"), 47 MIB_DESC(1, 0x64, "RxFiltering"), 48 MIB_DESC(1, 0x6c, "RxMulticast"), 49 MIB_DESC(1, 0x70, "RxBroadcast"), 50 MIB_DESC(1, 0x74, "RxAlignErr"), 51 MIB_DESC(1, 0x78, "RxCrcErr"), 52 MIB_DESC(1, 0x7c, "RxUnderSizeErr"), 53 MIB_DESC(1, 0x80, "RxFragErr"), 54 MIB_DESC(1, 0x84, "RxOverSzErr"), 55 MIB_DESC(1, 0x88, "RxJabberErr"), 56 MIB_DESC(1, 0x8c, "RxPause"), 57 MIB_DESC(1, 0x90, "RxPktSz64"), 58 MIB_DESC(1, 0x94, "RxPktSz65To127"), 59 MIB_DESC(1, 0x98, "RxPktSz128To255"), 60 MIB_DESC(1, 0x9c, "RxPktSz256To511"), 61 MIB_DESC(1, 0xa0, "RxPktSz512To1023"), 62 MIB_DESC(1, 0xa4, "RxPktSz1024ToMax"), 63 MIB_DESC(2, 0xa8, "RxBytes"), 64 MIB_DESC(1, 0xb0, "RxCtrlDrop"), 65 MIB_DESC(1, 0xb4, "RxIngressDrop"), 66 MIB_DESC(1, 0xb8, "RxArlDrop"), 67 }; 68 69 static int 70 core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad) 71 { 72 struct mii_bus *bus = priv->bus; 73 int value, ret; 74 75 /* Write the desired MMD Devad */ 76 ret = bus->write(bus, 0, MII_MMD_CTRL, devad); 77 if (ret < 0) 78 goto err; 79 80 /* Write the desired MMD register address */ 81 ret = bus->write(bus, 0, MII_MMD_DATA, prtad); 82 if (ret < 0) 83 goto err; 84 85 /* Select the Function : DATA with no post increment */ 86 ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR)); 87 if (ret < 0) 88 goto err; 89 90 /* Read the content of the MMD's selected register */ 91 value = bus->read(bus, 0, MII_MMD_DATA); 92 93 return value; 94 err: 95 dev_err(&bus->dev, "failed to read mmd register\n"); 96 97 return ret; 98 } 99 100 static int 101 core_write_mmd_indirect(struct mt7530_priv *priv, int prtad, 102 int devad, u32 data) 103 { 104 struct mii_bus *bus = priv->bus; 105 int ret; 106 107 /* Write the desired MMD Devad */ 108 ret = bus->write(bus, 0, MII_MMD_CTRL, devad); 109 if (ret < 0) 110 goto err; 111 112 /* Write the desired MMD register address */ 113 ret = bus->write(bus, 0, MII_MMD_DATA, prtad); 114 if (ret < 0) 115 goto err; 116 117 /* Select the Function : DATA with no post increment */ 118 ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR)); 119 if (ret < 0) 120 goto err; 121 122 /* Write the data into MMD's selected register */ 123 ret = bus->write(bus, 0, MII_MMD_DATA, data); 124 err: 125 if (ret < 0) 126 dev_err(&bus->dev, 127 "failed to write mmd register\n"); 128 return ret; 129 } 130 131 static void 132 core_write(struct mt7530_priv *priv, u32 reg, u32 val) 133 { 134 struct mii_bus *bus = priv->bus; 135 136 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 137 138 core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val); 139 140 mutex_unlock(&bus->mdio_lock); 141 } 142 143 static void 144 core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set) 145 { 146 struct mii_bus *bus = priv->bus; 147 u32 val; 148 149 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 150 151 val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2); 152 val &= ~mask; 153 val |= set; 154 core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val); 155 156 mutex_unlock(&bus->mdio_lock); 157 } 158 159 static void 160 core_set(struct mt7530_priv *priv, u32 reg, u32 val) 161 { 162 core_rmw(priv, reg, 0, val); 163 } 164 165 static void 166 core_clear(struct mt7530_priv *priv, u32 reg, u32 val) 167 { 168 core_rmw(priv, reg, val, 0); 169 } 170 171 static int 172 mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val) 173 { 174 struct mii_bus *bus = priv->bus; 175 u16 page, r, lo, hi; 176 int ret; 177 178 page = (reg >> 6) & 0x3ff; 179 r = (reg >> 2) & 0xf; 180 lo = val & 0xffff; 181 hi = val >> 16; 182 183 /* MT7530 uses 31 as the pseudo port */ 184 ret = bus->write(bus, 0x1f, 0x1f, page); 185 if (ret < 0) 186 goto err; 187 188 ret = bus->write(bus, 0x1f, r, lo); 189 if (ret < 0) 190 goto err; 191 192 ret = bus->write(bus, 0x1f, 0x10, hi); 193 err: 194 if (ret < 0) 195 dev_err(&bus->dev, 196 "failed to write mt7530 register\n"); 197 return ret; 198 } 199 200 static u32 201 mt7530_mii_read(struct mt7530_priv *priv, u32 reg) 202 { 203 struct mii_bus *bus = priv->bus; 204 u16 page, r, lo, hi; 205 int ret; 206 207 page = (reg >> 6) & 0x3ff; 208 r = (reg >> 2) & 0xf; 209 210 /* MT7530 uses 31 as the pseudo port */ 211 ret = bus->write(bus, 0x1f, 0x1f, page); 212 if (ret < 0) { 213 dev_err(&bus->dev, 214 "failed to read mt7530 register\n"); 215 return ret; 216 } 217 218 lo = bus->read(bus, 0x1f, r); 219 hi = bus->read(bus, 0x1f, 0x10); 220 221 return (hi << 16) | (lo & 0xffff); 222 } 223 224 static void 225 mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val) 226 { 227 struct mii_bus *bus = priv->bus; 228 229 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 230 231 mt7530_mii_write(priv, reg, val); 232 233 mutex_unlock(&bus->mdio_lock); 234 } 235 236 static u32 237 _mt7530_read(struct mt7530_dummy_poll *p) 238 { 239 struct mii_bus *bus = p->priv->bus; 240 u32 val; 241 242 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 243 244 val = mt7530_mii_read(p->priv, p->reg); 245 246 mutex_unlock(&bus->mdio_lock); 247 248 return val; 249 } 250 251 static u32 252 mt7530_read(struct mt7530_priv *priv, u32 reg) 253 { 254 struct mt7530_dummy_poll p; 255 256 INIT_MT7530_DUMMY_POLL(&p, priv, reg); 257 return _mt7530_read(&p); 258 } 259 260 static void 261 mt7530_rmw(struct mt7530_priv *priv, u32 reg, 262 u32 mask, u32 set) 263 { 264 struct mii_bus *bus = priv->bus; 265 u32 val; 266 267 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 268 269 val = mt7530_mii_read(priv, reg); 270 val &= ~mask; 271 val |= set; 272 mt7530_mii_write(priv, reg, val); 273 274 mutex_unlock(&bus->mdio_lock); 275 } 276 277 static void 278 mt7530_set(struct mt7530_priv *priv, u32 reg, u32 val) 279 { 280 mt7530_rmw(priv, reg, 0, val); 281 } 282 283 static void 284 mt7530_clear(struct mt7530_priv *priv, u32 reg, u32 val) 285 { 286 mt7530_rmw(priv, reg, val, 0); 287 } 288 289 static int 290 mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp) 291 { 292 u32 val; 293 int ret; 294 struct mt7530_dummy_poll p; 295 296 /* Set the command operating upon the MAC address entries */ 297 val = ATC_BUSY | ATC_MAT(0) | cmd; 298 mt7530_write(priv, MT7530_ATC, val); 299 300 INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_ATC); 301 ret = readx_poll_timeout(_mt7530_read, &p, val, 302 !(val & ATC_BUSY), 20, 20000); 303 if (ret < 0) { 304 dev_err(priv->dev, "reset timeout\n"); 305 return ret; 306 } 307 308 /* Additional sanity for read command if the specified 309 * entry is invalid 310 */ 311 val = mt7530_read(priv, MT7530_ATC); 312 if ((cmd == MT7530_FDB_READ) && (val & ATC_INVALID)) 313 return -EINVAL; 314 315 if (rsp) 316 *rsp = val; 317 318 return 0; 319 } 320 321 static void 322 mt7530_fdb_read(struct mt7530_priv *priv, struct mt7530_fdb *fdb) 323 { 324 u32 reg[3]; 325 int i; 326 327 /* Read from ARL table into an array */ 328 for (i = 0; i < 3; i++) { 329 reg[i] = mt7530_read(priv, MT7530_TSRA1 + (i * 4)); 330 331 dev_dbg(priv->dev, "%s(%d) reg[%d]=0x%x\n", 332 __func__, __LINE__, i, reg[i]); 333 } 334 335 fdb->vid = (reg[1] >> CVID) & CVID_MASK; 336 fdb->aging = (reg[2] >> AGE_TIMER) & AGE_TIMER_MASK; 337 fdb->port_mask = (reg[2] >> PORT_MAP) & PORT_MAP_MASK; 338 fdb->mac[0] = (reg[0] >> MAC_BYTE_0) & MAC_BYTE_MASK; 339 fdb->mac[1] = (reg[0] >> MAC_BYTE_1) & MAC_BYTE_MASK; 340 fdb->mac[2] = (reg[0] >> MAC_BYTE_2) & MAC_BYTE_MASK; 341 fdb->mac[3] = (reg[0] >> MAC_BYTE_3) & MAC_BYTE_MASK; 342 fdb->mac[4] = (reg[1] >> MAC_BYTE_4) & MAC_BYTE_MASK; 343 fdb->mac[5] = (reg[1] >> MAC_BYTE_5) & MAC_BYTE_MASK; 344 fdb->noarp = ((reg[2] >> ENT_STATUS) & ENT_STATUS_MASK) == STATIC_ENT; 345 } 346 347 static void 348 mt7530_fdb_write(struct mt7530_priv *priv, u16 vid, 349 u8 port_mask, const u8 *mac, 350 u8 aging, u8 type) 351 { 352 u32 reg[3] = { 0 }; 353 int i; 354 355 reg[1] |= vid & CVID_MASK; 356 reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER; 357 reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP; 358 /* STATIC_ENT indicate that entry is static wouldn't 359 * be aged out and STATIC_EMP specified as erasing an 360 * entry 361 */ 362 reg[2] |= (type & ENT_STATUS_MASK) << ENT_STATUS; 363 reg[1] |= mac[5] << MAC_BYTE_5; 364 reg[1] |= mac[4] << MAC_BYTE_4; 365 reg[0] |= mac[3] << MAC_BYTE_3; 366 reg[0] |= mac[2] << MAC_BYTE_2; 367 reg[0] |= mac[1] << MAC_BYTE_1; 368 reg[0] |= mac[0] << MAC_BYTE_0; 369 370 /* Write array into the ARL table */ 371 for (i = 0; i < 3; i++) 372 mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]); 373 } 374 375 static int 376 mt7530_pad_clk_setup(struct dsa_switch *ds, int mode) 377 { 378 struct mt7530_priv *priv = ds->priv; 379 u32 ncpo1, ssc_delta, trgint, i, xtal; 380 381 xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK; 382 383 if (xtal == HWTRAP_XTAL_20MHZ) { 384 dev_err(priv->dev, 385 "%s: MT7530 with a 20MHz XTAL is not supported!\n", 386 __func__); 387 return -EINVAL; 388 } 389 390 switch (mode) { 391 case PHY_INTERFACE_MODE_RGMII: 392 trgint = 0; 393 /* PLL frequency: 125MHz */ 394 ncpo1 = 0x0c80; 395 break; 396 case PHY_INTERFACE_MODE_TRGMII: 397 trgint = 1; 398 if (priv->id == ID_MT7621) { 399 /* PLL frequency: 150MHz: 1.2GBit */ 400 if (xtal == HWTRAP_XTAL_40MHZ) 401 ncpo1 = 0x0780; 402 if (xtal == HWTRAP_XTAL_25MHZ) 403 ncpo1 = 0x0a00; 404 } else { /* PLL frequency: 250MHz: 2.0Gbit */ 405 if (xtal == HWTRAP_XTAL_40MHZ) 406 ncpo1 = 0x0c80; 407 if (xtal == HWTRAP_XTAL_25MHZ) 408 ncpo1 = 0x1400; 409 } 410 break; 411 default: 412 dev_err(priv->dev, "xMII mode %d not supported\n", mode); 413 return -EINVAL; 414 } 415 416 if (xtal == HWTRAP_XTAL_25MHZ) 417 ssc_delta = 0x57; 418 else 419 ssc_delta = 0x87; 420 421 mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, 422 P6_INTF_MODE(trgint)); 423 424 /* Lower Tx Driving for TRGMII path */ 425 for (i = 0 ; i < NUM_TRGMII_CTRL ; i++) 426 mt7530_write(priv, MT7530_TRGMII_TD_ODT(i), 427 TD_DM_DRVP(8) | TD_DM_DRVN(8)); 428 429 /* Setup core clock for MT7530 */ 430 if (!trgint) { 431 /* Disable MT7530 core clock */ 432 core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); 433 434 /* Disable PLL, since phy_device has not yet been created 435 * provided for phy_[read,write]_mmd_indirect is called, we 436 * provide our own core_write_mmd_indirect to complete this 437 * function. 438 */ 439 core_write_mmd_indirect(priv, 440 CORE_GSWPLL_GRP1, 441 MDIO_MMD_VEND2, 442 0); 443 444 /* Set core clock into 500Mhz */ 445 core_write(priv, CORE_GSWPLL_GRP2, 446 RG_GSWPLL_POSDIV_500M(1) | 447 RG_GSWPLL_FBKDIV_500M(25)); 448 449 /* Enable PLL */ 450 core_write(priv, CORE_GSWPLL_GRP1, 451 RG_GSWPLL_EN_PRE | 452 RG_GSWPLL_POSDIV_200M(2) | 453 RG_GSWPLL_FBKDIV_200M(32)); 454 455 /* Enable MT7530 core clock */ 456 core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); 457 } 458 459 /* Setup the MT7530 TRGMII Tx Clock */ 460 core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); 461 core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1)); 462 core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0)); 463 core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta)); 464 core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta)); 465 core_write(priv, CORE_PLL_GROUP4, 466 RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN | 467 RG_SYSPLL_BIAS_LPF_EN); 468 core_write(priv, CORE_PLL_GROUP2, 469 RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN | 470 RG_SYSPLL_POSDIV(1)); 471 core_write(priv, CORE_PLL_GROUP7, 472 RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) | 473 RG_LCDDS_PWDB | RG_LCDDS_ISO_EN); 474 core_set(priv, CORE_TRGMII_GSW_CLK_CG, 475 REG_GSWCK_EN | REG_TRGMIICK_EN); 476 477 if (!trgint) 478 for (i = 0 ; i < NUM_TRGMII_CTRL; i++) 479 mt7530_rmw(priv, MT7530_TRGMII_RD(i), 480 RD_TAP_MASK, RD_TAP(16)); 481 return 0; 482 } 483 484 static void 485 mt7530_mib_reset(struct dsa_switch *ds) 486 { 487 struct mt7530_priv *priv = ds->priv; 488 489 mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_FLUSH); 490 mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE); 491 } 492 493 static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum) 494 { 495 struct mt7530_priv *priv = ds->priv; 496 497 return mdiobus_read_nested(priv->bus, port, regnum); 498 } 499 500 static int mt7530_phy_write(struct dsa_switch *ds, int port, int regnum, 501 u16 val) 502 { 503 struct mt7530_priv *priv = ds->priv; 504 505 return mdiobus_write_nested(priv->bus, port, regnum, val); 506 } 507 508 static void 509 mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset, 510 uint8_t *data) 511 { 512 int i; 513 514 if (stringset != ETH_SS_STATS) 515 return; 516 517 for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) 518 strncpy(data + i * ETH_GSTRING_LEN, mt7530_mib[i].name, 519 ETH_GSTRING_LEN); 520 } 521 522 static void 523 mt7530_get_ethtool_stats(struct dsa_switch *ds, int port, 524 uint64_t *data) 525 { 526 struct mt7530_priv *priv = ds->priv; 527 const struct mt7530_mib_desc *mib; 528 u32 reg, i; 529 u64 hi; 530 531 for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) { 532 mib = &mt7530_mib[i]; 533 reg = MT7530_PORT_MIB_COUNTER(port) + mib->offset; 534 535 data[i] = mt7530_read(priv, reg); 536 if (mib->size == 2) { 537 hi = mt7530_read(priv, reg + 4); 538 data[i] |= hi << 32; 539 } 540 } 541 } 542 543 static int 544 mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset) 545 { 546 if (sset != ETH_SS_STATS) 547 return 0; 548 549 return ARRAY_SIZE(mt7530_mib); 550 } 551 552 static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) 553 { 554 struct mt7530_priv *priv = ds->priv; 555 u8 tx_delay = 0; 556 int val; 557 558 mutex_lock(&priv->reg_mutex); 559 560 val = mt7530_read(priv, MT7530_MHWTRAP); 561 562 val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS; 563 val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL; 564 565 switch (priv->p5_intf_sel) { 566 case P5_INTF_SEL_PHY_P0: 567 /* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */ 568 val |= MHWTRAP_PHY0_SEL; 569 /* fall through */ 570 case P5_INTF_SEL_PHY_P4: 571 /* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */ 572 val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS; 573 574 /* Setup the MAC by default for the cpu port */ 575 mt7530_write(priv, MT7530_PMCR_P(5), 0x56300); 576 break; 577 case P5_INTF_SEL_GMAC5: 578 /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */ 579 val &= ~MHWTRAP_P5_DIS; 580 break; 581 case P5_DISABLED: 582 interface = PHY_INTERFACE_MODE_NA; 583 break; 584 default: 585 dev_err(ds->dev, "Unsupported p5_intf_sel %d\n", 586 priv->p5_intf_sel); 587 goto unlock_exit; 588 } 589 590 /* Setup RGMII settings */ 591 if (phy_interface_mode_is_rgmii(interface)) { 592 val |= MHWTRAP_P5_RGMII_MODE; 593 594 /* P5 RGMII RX Clock Control: delay setting for 1000M */ 595 mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN); 596 597 /* Don't set delay in DSA mode */ 598 if (!dsa_is_dsa_port(priv->ds, 5) && 599 (interface == PHY_INTERFACE_MODE_RGMII_TXID || 600 interface == PHY_INTERFACE_MODE_RGMII_ID)) 601 tx_delay = 4; /* n * 0.5 ns */ 602 603 /* P5 RGMII TX Clock Control: delay x */ 604 mt7530_write(priv, MT7530_P5RGMIITXCR, 605 CSR_RGMII_TXC_CFG(0x10 + tx_delay)); 606 607 /* reduce P5 RGMII Tx driving, 8mA */ 608 mt7530_write(priv, MT7530_IO_DRV_CR, 609 P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1)); 610 } 611 612 mt7530_write(priv, MT7530_MHWTRAP, val); 613 614 dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n", 615 val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface)); 616 617 priv->p5_interface = interface; 618 619 unlock_exit: 620 mutex_unlock(&priv->reg_mutex); 621 } 622 623 static int 624 mt7530_cpu_port_enable(struct mt7530_priv *priv, 625 int port) 626 { 627 /* Enable Mediatek header mode on the cpu port */ 628 mt7530_write(priv, MT7530_PVC_P(port), 629 PORT_SPEC_TAG); 630 631 /* Disable auto learning on the cpu port */ 632 mt7530_set(priv, MT7530_PSC_P(port), SA_DIS); 633 634 /* Unknown unicast frame fordwarding to the cpu port */ 635 mt7530_set(priv, MT7530_MFC, UNU_FFP(BIT(port))); 636 637 /* Set CPU port number */ 638 if (priv->id == ID_MT7621) 639 mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); 640 641 /* CPU port gets connected to all user ports of 642 * the switch 643 */ 644 mt7530_write(priv, MT7530_PCR_P(port), 645 PCR_MATRIX(dsa_user_ports(priv->ds))); 646 647 return 0; 648 } 649 650 static int 651 mt7530_port_enable(struct dsa_switch *ds, int port, 652 struct phy_device *phy) 653 { 654 struct mt7530_priv *priv = ds->priv; 655 656 if (!dsa_is_user_port(ds, port)) 657 return 0; 658 659 mutex_lock(&priv->reg_mutex); 660 661 /* Allow the user port gets connected to the cpu port and also 662 * restore the port matrix if the port is the member of a certain 663 * bridge. 664 */ 665 priv->ports[port].pm |= PCR_MATRIX(BIT(MT7530_CPU_PORT)); 666 priv->ports[port].enable = true; 667 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, 668 priv->ports[port].pm); 669 mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); 670 671 mutex_unlock(&priv->reg_mutex); 672 673 return 0; 674 } 675 676 static void 677 mt7530_port_disable(struct dsa_switch *ds, int port) 678 { 679 struct mt7530_priv *priv = ds->priv; 680 681 if (!dsa_is_user_port(ds, port)) 682 return; 683 684 mutex_lock(&priv->reg_mutex); 685 686 /* Clear up all port matrix which could be restored in the next 687 * enablement for the port. 688 */ 689 priv->ports[port].enable = false; 690 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, 691 PCR_MATRIX_CLR); 692 mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); 693 694 mutex_unlock(&priv->reg_mutex); 695 } 696 697 static void 698 mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state) 699 { 700 struct mt7530_priv *priv = ds->priv; 701 u32 stp_state; 702 703 switch (state) { 704 case BR_STATE_DISABLED: 705 stp_state = MT7530_STP_DISABLED; 706 break; 707 case BR_STATE_BLOCKING: 708 stp_state = MT7530_STP_BLOCKING; 709 break; 710 case BR_STATE_LISTENING: 711 stp_state = MT7530_STP_LISTENING; 712 break; 713 case BR_STATE_LEARNING: 714 stp_state = MT7530_STP_LEARNING; 715 break; 716 case BR_STATE_FORWARDING: 717 default: 718 stp_state = MT7530_STP_FORWARDING; 719 break; 720 } 721 722 mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK, stp_state); 723 } 724 725 static int 726 mt7530_port_bridge_join(struct dsa_switch *ds, int port, 727 struct net_device *bridge) 728 { 729 struct mt7530_priv *priv = ds->priv; 730 u32 port_bitmap = BIT(MT7530_CPU_PORT); 731 int i; 732 733 mutex_lock(&priv->reg_mutex); 734 735 for (i = 0; i < MT7530_NUM_PORTS; i++) { 736 /* Add this port to the port matrix of the other ports in the 737 * same bridge. If the port is disabled, port matrix is kept 738 * and not being setup until the port becomes enabled. 739 */ 740 if (dsa_is_user_port(ds, i) && i != port) { 741 if (dsa_to_port(ds, i)->bridge_dev != bridge) 742 continue; 743 if (priv->ports[i].enable) 744 mt7530_set(priv, MT7530_PCR_P(i), 745 PCR_MATRIX(BIT(port))); 746 priv->ports[i].pm |= PCR_MATRIX(BIT(port)); 747 748 port_bitmap |= BIT(i); 749 } 750 } 751 752 /* Add the all other ports to this port matrix. */ 753 if (priv->ports[port].enable) 754 mt7530_rmw(priv, MT7530_PCR_P(port), 755 PCR_MATRIX_MASK, PCR_MATRIX(port_bitmap)); 756 priv->ports[port].pm |= PCR_MATRIX(port_bitmap); 757 758 mutex_unlock(&priv->reg_mutex); 759 760 return 0; 761 } 762 763 static void 764 mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port) 765 { 766 struct mt7530_priv *priv = ds->priv; 767 bool all_user_ports_removed = true; 768 int i; 769 770 /* When a port is removed from the bridge, the port would be set up 771 * back to the default as is at initial boot which is a VLAN-unaware 772 * port. 773 */ 774 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, 775 MT7530_PORT_MATRIX_MODE); 776 mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK | PVC_EG_TAG_MASK, 777 VLAN_ATTR(MT7530_VLAN_TRANSPARENT) | 778 PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); 779 780 for (i = 0; i < MT7530_NUM_PORTS; i++) { 781 if (dsa_is_user_port(ds, i) && 782 dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) { 783 all_user_ports_removed = false; 784 break; 785 } 786 } 787 788 /* CPU port also does the same thing until all user ports belonging to 789 * the CPU port get out of VLAN filtering mode. 790 */ 791 if (all_user_ports_removed) { 792 mt7530_write(priv, MT7530_PCR_P(MT7530_CPU_PORT), 793 PCR_MATRIX(dsa_user_ports(priv->ds))); 794 mt7530_write(priv, MT7530_PVC_P(MT7530_CPU_PORT), PORT_SPEC_TAG 795 | PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); 796 } 797 } 798 799 static void 800 mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port) 801 { 802 struct mt7530_priv *priv = ds->priv; 803 804 /* The real fabric path would be decided on the membership in the 805 * entry of VLAN table. PCR_MATRIX set up here with ALL_MEMBERS 806 * means potential VLAN can be consisting of certain subset of all 807 * ports. 808 */ 809 mt7530_rmw(priv, MT7530_PCR_P(port), 810 PCR_MATRIX_MASK, PCR_MATRIX(MT7530_ALL_MEMBERS)); 811 812 /* Trapped into security mode allows packet forwarding through VLAN 813 * table lookup. CPU port is set to fallback mode to let untagged 814 * frames pass through. 815 */ 816 if (dsa_is_cpu_port(ds, port)) 817 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, 818 MT7530_PORT_FALLBACK_MODE); 819 else 820 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, 821 MT7530_PORT_SECURITY_MODE); 822 823 /* Set the port as a user port which is to be able to recognize VID 824 * from incoming packets before fetching entry within the VLAN table. 825 */ 826 mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK | PVC_EG_TAG_MASK, 827 VLAN_ATTR(MT7530_VLAN_USER) | 828 PVC_EG_TAG(MT7530_VLAN_EG_DISABLED)); 829 } 830 831 static void 832 mt7530_port_bridge_leave(struct dsa_switch *ds, int port, 833 struct net_device *bridge) 834 { 835 struct mt7530_priv *priv = ds->priv; 836 int i; 837 838 mutex_lock(&priv->reg_mutex); 839 840 for (i = 0; i < MT7530_NUM_PORTS; i++) { 841 /* Remove this port from the port matrix of the other ports 842 * in the same bridge. If the port is disabled, port matrix 843 * is kept and not being setup until the port becomes enabled. 844 * And the other port's port matrix cannot be broken when the 845 * other port is still a VLAN-aware port. 846 */ 847 if (dsa_is_user_port(ds, i) && i != port && 848 !dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) { 849 if (dsa_to_port(ds, i)->bridge_dev != bridge) 850 continue; 851 if (priv->ports[i].enable) 852 mt7530_clear(priv, MT7530_PCR_P(i), 853 PCR_MATRIX(BIT(port))); 854 priv->ports[i].pm &= ~PCR_MATRIX(BIT(port)); 855 } 856 } 857 858 /* Set the cpu port to be the only one in the port matrix of 859 * this port. 860 */ 861 if (priv->ports[port].enable) 862 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, 863 PCR_MATRIX(BIT(MT7530_CPU_PORT))); 864 priv->ports[port].pm = PCR_MATRIX(BIT(MT7530_CPU_PORT)); 865 866 mutex_unlock(&priv->reg_mutex); 867 } 868 869 static int 870 mt7530_port_fdb_add(struct dsa_switch *ds, int port, 871 const unsigned char *addr, u16 vid) 872 { 873 struct mt7530_priv *priv = ds->priv; 874 int ret; 875 u8 port_mask = BIT(port); 876 877 mutex_lock(&priv->reg_mutex); 878 mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_ENT); 879 ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL); 880 mutex_unlock(&priv->reg_mutex); 881 882 return ret; 883 } 884 885 static int 886 mt7530_port_fdb_del(struct dsa_switch *ds, int port, 887 const unsigned char *addr, u16 vid) 888 { 889 struct mt7530_priv *priv = ds->priv; 890 int ret; 891 u8 port_mask = BIT(port); 892 893 mutex_lock(&priv->reg_mutex); 894 mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_EMP); 895 ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL); 896 mutex_unlock(&priv->reg_mutex); 897 898 return ret; 899 } 900 901 static int 902 mt7530_port_fdb_dump(struct dsa_switch *ds, int port, 903 dsa_fdb_dump_cb_t *cb, void *data) 904 { 905 struct mt7530_priv *priv = ds->priv; 906 struct mt7530_fdb _fdb = { 0 }; 907 int cnt = MT7530_NUM_FDB_RECORDS; 908 int ret = 0; 909 u32 rsp = 0; 910 911 mutex_lock(&priv->reg_mutex); 912 913 ret = mt7530_fdb_cmd(priv, MT7530_FDB_START, &rsp); 914 if (ret < 0) 915 goto err; 916 917 do { 918 if (rsp & ATC_SRCH_HIT) { 919 mt7530_fdb_read(priv, &_fdb); 920 if (_fdb.port_mask & BIT(port)) { 921 ret = cb(_fdb.mac, _fdb.vid, _fdb.noarp, 922 data); 923 if (ret < 0) 924 break; 925 } 926 } 927 } while (--cnt && 928 !(rsp & ATC_SRCH_END) && 929 !mt7530_fdb_cmd(priv, MT7530_FDB_NEXT, &rsp)); 930 err: 931 mutex_unlock(&priv->reg_mutex); 932 933 return 0; 934 } 935 936 static int 937 mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid) 938 { 939 struct mt7530_dummy_poll p; 940 u32 val; 941 int ret; 942 943 val = VTCR_BUSY | VTCR_FUNC(cmd) | vid; 944 mt7530_write(priv, MT7530_VTCR, val); 945 946 INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_VTCR); 947 ret = readx_poll_timeout(_mt7530_read, &p, val, 948 !(val & VTCR_BUSY), 20, 20000); 949 if (ret < 0) { 950 dev_err(priv->dev, "poll timeout\n"); 951 return ret; 952 } 953 954 val = mt7530_read(priv, MT7530_VTCR); 955 if (val & VTCR_INVALID) { 956 dev_err(priv->dev, "read VTCR invalid\n"); 957 return -EINVAL; 958 } 959 960 return 0; 961 } 962 963 static int 964 mt7530_port_vlan_filtering(struct dsa_switch *ds, int port, 965 bool vlan_filtering) 966 { 967 if (vlan_filtering) { 968 /* The port is being kept as VLAN-unaware port when bridge is 969 * set up with vlan_filtering not being set, Otherwise, the 970 * port and the corresponding CPU port is required the setup 971 * for becoming a VLAN-aware port. 972 */ 973 mt7530_port_set_vlan_aware(ds, port); 974 mt7530_port_set_vlan_aware(ds, MT7530_CPU_PORT); 975 } else { 976 mt7530_port_set_vlan_unaware(ds, port); 977 } 978 979 return 0; 980 } 981 982 static int 983 mt7530_port_vlan_prepare(struct dsa_switch *ds, int port, 984 const struct switchdev_obj_port_vlan *vlan) 985 { 986 /* nothing needed */ 987 988 return 0; 989 } 990 991 static void 992 mt7530_hw_vlan_add(struct mt7530_priv *priv, 993 struct mt7530_hw_vlan_entry *entry) 994 { 995 u8 new_members; 996 u32 val; 997 998 new_members = entry->old_members | BIT(entry->port) | 999 BIT(MT7530_CPU_PORT); 1000 1001 /* Validate the entry with independent learning, create egress tag per 1002 * VLAN and joining the port as one of the port members. 1003 */ 1004 val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | VLAN_VALID; 1005 mt7530_write(priv, MT7530_VAWD1, val); 1006 1007 /* Decide whether adding tag or not for those outgoing packets from the 1008 * port inside the VLAN. 1009 */ 1010 val = entry->untagged ? MT7530_VLAN_EGRESS_UNTAG : 1011 MT7530_VLAN_EGRESS_TAG; 1012 mt7530_rmw(priv, MT7530_VAWD2, 1013 ETAG_CTRL_P_MASK(entry->port), 1014 ETAG_CTRL_P(entry->port, val)); 1015 1016 /* CPU port is always taken as a tagged port for serving more than one 1017 * VLANs across and also being applied with egress type stack mode for 1018 * that VLAN tags would be appended after hardware special tag used as 1019 * DSA tag. 1020 */ 1021 mt7530_rmw(priv, MT7530_VAWD2, 1022 ETAG_CTRL_P_MASK(MT7530_CPU_PORT), 1023 ETAG_CTRL_P(MT7530_CPU_PORT, 1024 MT7530_VLAN_EGRESS_STACK)); 1025 } 1026 1027 static void 1028 mt7530_hw_vlan_del(struct mt7530_priv *priv, 1029 struct mt7530_hw_vlan_entry *entry) 1030 { 1031 u8 new_members; 1032 u32 val; 1033 1034 new_members = entry->old_members & ~BIT(entry->port); 1035 1036 val = mt7530_read(priv, MT7530_VAWD1); 1037 if (!(val & VLAN_VALID)) { 1038 dev_err(priv->dev, 1039 "Cannot be deleted due to invalid entry\n"); 1040 return; 1041 } 1042 1043 /* If certain member apart from CPU port is still alive in the VLAN, 1044 * the entry would be kept valid. Otherwise, the entry is got to be 1045 * disabled. 1046 */ 1047 if (new_members && new_members != BIT(MT7530_CPU_PORT)) { 1048 val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | 1049 VLAN_VALID; 1050 mt7530_write(priv, MT7530_VAWD1, val); 1051 } else { 1052 mt7530_write(priv, MT7530_VAWD1, 0); 1053 mt7530_write(priv, MT7530_VAWD2, 0); 1054 } 1055 } 1056 1057 static void 1058 mt7530_hw_vlan_update(struct mt7530_priv *priv, u16 vid, 1059 struct mt7530_hw_vlan_entry *entry, 1060 mt7530_vlan_op vlan_op) 1061 { 1062 u32 val; 1063 1064 /* Fetch entry */ 1065 mt7530_vlan_cmd(priv, MT7530_VTCR_RD_VID, vid); 1066 1067 val = mt7530_read(priv, MT7530_VAWD1); 1068 1069 entry->old_members = (val >> PORT_MEM_SHFT) & PORT_MEM_MASK; 1070 1071 /* Manipulate entry */ 1072 vlan_op(priv, entry); 1073 1074 /* Flush result to hardware */ 1075 mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, vid); 1076 } 1077 1078 static void 1079 mt7530_port_vlan_add(struct dsa_switch *ds, int port, 1080 const struct switchdev_obj_port_vlan *vlan) 1081 { 1082 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; 1083 bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; 1084 struct mt7530_hw_vlan_entry new_entry; 1085 struct mt7530_priv *priv = ds->priv; 1086 u16 vid; 1087 1088 mutex_lock(&priv->reg_mutex); 1089 1090 for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { 1091 mt7530_hw_vlan_entry_init(&new_entry, port, untagged); 1092 mt7530_hw_vlan_update(priv, vid, &new_entry, 1093 mt7530_hw_vlan_add); 1094 } 1095 1096 if (pvid) { 1097 mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, 1098 G0_PORT_VID(vlan->vid_end)); 1099 priv->ports[port].pvid = vlan->vid_end; 1100 } 1101 1102 mutex_unlock(&priv->reg_mutex); 1103 } 1104 1105 static int 1106 mt7530_port_vlan_del(struct dsa_switch *ds, int port, 1107 const struct switchdev_obj_port_vlan *vlan) 1108 { 1109 struct mt7530_hw_vlan_entry target_entry; 1110 struct mt7530_priv *priv = ds->priv; 1111 u16 vid, pvid; 1112 1113 mutex_lock(&priv->reg_mutex); 1114 1115 pvid = priv->ports[port].pvid; 1116 for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { 1117 mt7530_hw_vlan_entry_init(&target_entry, port, 0); 1118 mt7530_hw_vlan_update(priv, vid, &target_entry, 1119 mt7530_hw_vlan_del); 1120 1121 /* PVID is being restored to the default whenever the PVID port 1122 * is being removed from the VLAN. 1123 */ 1124 if (pvid == vid) 1125 pvid = G0_PORT_VID_DEF; 1126 } 1127 1128 mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, pvid); 1129 priv->ports[port].pvid = pvid; 1130 1131 mutex_unlock(&priv->reg_mutex); 1132 1133 return 0; 1134 } 1135 1136 static int mt7530_port_mirror_add(struct dsa_switch *ds, int port, 1137 struct dsa_mall_mirror_tc_entry *mirror, 1138 bool ingress) 1139 { 1140 struct mt7530_priv *priv = ds->priv; 1141 u32 val; 1142 1143 /* Check for existent entry */ 1144 if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port)) 1145 return -EEXIST; 1146 1147 val = mt7530_read(priv, MT7530_MFC); 1148 1149 /* MT7530 only supports one monitor port */ 1150 if (val & MIRROR_EN && MIRROR_PORT(val) != mirror->to_local_port) 1151 return -EEXIST; 1152 1153 val |= MIRROR_EN; 1154 val &= ~MIRROR_MASK; 1155 val |= mirror->to_local_port; 1156 mt7530_write(priv, MT7530_MFC, val); 1157 1158 val = mt7530_read(priv, MT7530_PCR_P(port)); 1159 if (ingress) { 1160 val |= PORT_RX_MIR; 1161 priv->mirror_rx |= BIT(port); 1162 } else { 1163 val |= PORT_TX_MIR; 1164 priv->mirror_tx |= BIT(port); 1165 } 1166 mt7530_write(priv, MT7530_PCR_P(port), val); 1167 1168 return 0; 1169 } 1170 1171 static void mt7530_port_mirror_del(struct dsa_switch *ds, int port, 1172 struct dsa_mall_mirror_tc_entry *mirror) 1173 { 1174 struct mt7530_priv *priv = ds->priv; 1175 u32 val; 1176 1177 val = mt7530_read(priv, MT7530_PCR_P(port)); 1178 if (mirror->ingress) { 1179 val &= ~PORT_RX_MIR; 1180 priv->mirror_rx &= ~BIT(port); 1181 } else { 1182 val &= ~PORT_TX_MIR; 1183 priv->mirror_tx &= ~BIT(port); 1184 } 1185 mt7530_write(priv, MT7530_PCR_P(port), val); 1186 1187 if (!priv->mirror_rx && !priv->mirror_tx) { 1188 val = mt7530_read(priv, MT7530_MFC); 1189 val &= ~MIRROR_EN; 1190 mt7530_write(priv, MT7530_MFC, val); 1191 } 1192 } 1193 1194 static enum dsa_tag_protocol 1195 mtk_get_tag_protocol(struct dsa_switch *ds, int port, 1196 enum dsa_tag_protocol mp) 1197 { 1198 struct mt7530_priv *priv = ds->priv; 1199 1200 if (port != MT7530_CPU_PORT) { 1201 dev_warn(priv->dev, 1202 "port not matched with tagging CPU port\n"); 1203 return DSA_TAG_PROTO_NONE; 1204 } else { 1205 return DSA_TAG_PROTO_MTK; 1206 } 1207 } 1208 1209 static int 1210 mt7530_setup(struct dsa_switch *ds) 1211 { 1212 struct mt7530_priv *priv = ds->priv; 1213 struct device_node *phy_node; 1214 struct device_node *mac_np; 1215 struct mt7530_dummy_poll p; 1216 phy_interface_t interface; 1217 struct device_node *dn; 1218 u32 id, val; 1219 int ret, i; 1220 1221 /* The parent node of master netdev which holds the common system 1222 * controller also is the container for two GMACs nodes representing 1223 * as two netdev instances. 1224 */ 1225 dn = dsa_to_port(ds, MT7530_CPU_PORT)->master->dev.of_node->parent; 1226 ds->configure_vlan_while_not_filtering = true; 1227 1228 if (priv->id == ID_MT7530) { 1229 regulator_set_voltage(priv->core_pwr, 1000000, 1000000); 1230 ret = regulator_enable(priv->core_pwr); 1231 if (ret < 0) { 1232 dev_err(priv->dev, 1233 "Failed to enable core power: %d\n", ret); 1234 return ret; 1235 } 1236 1237 regulator_set_voltage(priv->io_pwr, 3300000, 3300000); 1238 ret = regulator_enable(priv->io_pwr); 1239 if (ret < 0) { 1240 dev_err(priv->dev, "Failed to enable io pwr: %d\n", 1241 ret); 1242 return ret; 1243 } 1244 } 1245 1246 /* Reset whole chip through gpio pin or memory-mapped registers for 1247 * different type of hardware 1248 */ 1249 if (priv->mcm) { 1250 reset_control_assert(priv->rstc); 1251 usleep_range(1000, 1100); 1252 reset_control_deassert(priv->rstc); 1253 } else { 1254 gpiod_set_value_cansleep(priv->reset, 0); 1255 usleep_range(1000, 1100); 1256 gpiod_set_value_cansleep(priv->reset, 1); 1257 } 1258 1259 /* Waiting for MT7530 got to stable */ 1260 INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP); 1261 ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0, 1262 20, 1000000); 1263 if (ret < 0) { 1264 dev_err(priv->dev, "reset timeout\n"); 1265 return ret; 1266 } 1267 1268 id = mt7530_read(priv, MT7530_CREV); 1269 id >>= CHIP_NAME_SHIFT; 1270 if (id != MT7530_ID) { 1271 dev_err(priv->dev, "chip %x can't be supported\n", id); 1272 return -ENODEV; 1273 } 1274 1275 /* Reset the switch through internal reset */ 1276 mt7530_write(priv, MT7530_SYS_CTRL, 1277 SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | 1278 SYS_CTRL_REG_RST); 1279 1280 /* Enable Port 6 only; P5 as GMAC5 which currently is not supported */ 1281 val = mt7530_read(priv, MT7530_MHWTRAP); 1282 val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS; 1283 val |= MHWTRAP_MANUAL; 1284 mt7530_write(priv, MT7530_MHWTRAP, val); 1285 1286 priv->p6_interface = PHY_INTERFACE_MODE_NA; 1287 1288 /* Enable and reset MIB counters */ 1289 mt7530_mib_reset(ds); 1290 1291 mt7530_clear(priv, MT7530_MFC, UNU_FFP_MASK); 1292 1293 for (i = 0; i < MT7530_NUM_PORTS; i++) { 1294 /* Disable forwarding by default on all ports */ 1295 mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, 1296 PCR_MATRIX_CLR); 1297 1298 if (dsa_is_cpu_port(ds, i)) 1299 mt7530_cpu_port_enable(priv, i); 1300 else 1301 mt7530_port_disable(ds, i); 1302 1303 /* Enable consistent egress tag */ 1304 mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK, 1305 PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); 1306 } 1307 1308 /* Setup port 5 */ 1309 priv->p5_intf_sel = P5_DISABLED; 1310 interface = PHY_INTERFACE_MODE_NA; 1311 1312 if (!dsa_is_unused_port(ds, 5)) { 1313 priv->p5_intf_sel = P5_INTF_SEL_GMAC5; 1314 ret = of_get_phy_mode(dsa_to_port(ds, 5)->dn, &interface); 1315 if (ret && ret != -ENODEV) 1316 return ret; 1317 } else { 1318 /* Scan the ethernet nodes. look for GMAC1, lookup used phy */ 1319 for_each_child_of_node(dn, mac_np) { 1320 if (!of_device_is_compatible(mac_np, 1321 "mediatek,eth-mac")) 1322 continue; 1323 1324 ret = of_property_read_u32(mac_np, "reg", &id); 1325 if (ret < 0 || id != 1) 1326 continue; 1327 1328 phy_node = of_parse_phandle(mac_np, "phy-handle", 0); 1329 if (!phy_node) 1330 continue; 1331 1332 if (phy_node->parent == priv->dev->of_node->parent) { 1333 ret = of_get_phy_mode(mac_np, &interface); 1334 if (ret && ret != -ENODEV) 1335 return ret; 1336 id = of_mdio_parse_addr(ds->dev, phy_node); 1337 if (id == 0) 1338 priv->p5_intf_sel = P5_INTF_SEL_PHY_P0; 1339 if (id == 4) 1340 priv->p5_intf_sel = P5_INTF_SEL_PHY_P4; 1341 } 1342 of_node_put(phy_node); 1343 break; 1344 } 1345 } 1346 1347 mt7530_setup_port5(ds, interface); 1348 1349 /* Flush the FDB table */ 1350 ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); 1351 if (ret < 0) 1352 return ret; 1353 1354 return 0; 1355 } 1356 1357 static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port, 1358 unsigned int mode, 1359 const struct phylink_link_state *state) 1360 { 1361 struct mt7530_priv *priv = ds->priv; 1362 u32 mcr_cur, mcr_new; 1363 1364 switch (port) { 1365 case 0: /* Internal phy */ 1366 case 1: 1367 case 2: 1368 case 3: 1369 case 4: 1370 if (state->interface != PHY_INTERFACE_MODE_GMII) 1371 return; 1372 break; 1373 case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ 1374 if (priv->p5_interface == state->interface) 1375 break; 1376 if (!phy_interface_mode_is_rgmii(state->interface) && 1377 state->interface != PHY_INTERFACE_MODE_MII && 1378 state->interface != PHY_INTERFACE_MODE_GMII) 1379 return; 1380 1381 mt7530_setup_port5(ds, state->interface); 1382 break; 1383 case 6: /* 1st cpu port */ 1384 if (priv->p6_interface == state->interface) 1385 break; 1386 1387 if (state->interface != PHY_INTERFACE_MODE_RGMII && 1388 state->interface != PHY_INTERFACE_MODE_TRGMII) 1389 return; 1390 1391 /* Setup TX circuit incluing relevant PAD and driving */ 1392 mt7530_pad_clk_setup(ds, state->interface); 1393 1394 priv->p6_interface = state->interface; 1395 break; 1396 default: 1397 dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); 1398 return; 1399 } 1400 1401 if (phylink_autoneg_inband(mode)) { 1402 dev_err(ds->dev, "%s: in-band negotiation unsupported\n", 1403 __func__); 1404 return; 1405 } 1406 1407 mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); 1408 mcr_new = mcr_cur; 1409 mcr_new &= ~PMCR_LINK_SETTINGS_MASK; 1410 mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | 1411 PMCR_BACKPR_EN | PMCR_FORCE_MODE; 1412 1413 /* Are we connected to external phy */ 1414 if (port == 5 && dsa_is_user_port(ds, 5)) 1415 mcr_new |= PMCR_EXT_PHY; 1416 1417 if (mcr_new != mcr_cur) 1418 mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); 1419 } 1420 1421 static void mt7530_phylink_mac_link_down(struct dsa_switch *ds, int port, 1422 unsigned int mode, 1423 phy_interface_t interface) 1424 { 1425 struct mt7530_priv *priv = ds->priv; 1426 1427 mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); 1428 } 1429 1430 static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port, 1431 unsigned int mode, 1432 phy_interface_t interface, 1433 struct phy_device *phydev, 1434 int speed, int duplex, 1435 bool tx_pause, bool rx_pause) 1436 { 1437 struct mt7530_priv *priv = ds->priv; 1438 u32 mcr; 1439 1440 mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK; 1441 1442 switch (speed) { 1443 case SPEED_1000: 1444 mcr |= PMCR_FORCE_SPEED_1000; 1445 break; 1446 case SPEED_100: 1447 mcr |= PMCR_FORCE_SPEED_100; 1448 break; 1449 } 1450 if (duplex == DUPLEX_FULL) { 1451 mcr |= PMCR_FORCE_FDX; 1452 if (tx_pause) 1453 mcr |= PMCR_TX_FC_EN; 1454 if (rx_pause) 1455 mcr |= PMCR_RX_FC_EN; 1456 } 1457 1458 mt7530_set(priv, MT7530_PMCR_P(port), mcr); 1459 } 1460 1461 static void mt7530_phylink_validate(struct dsa_switch *ds, int port, 1462 unsigned long *supported, 1463 struct phylink_link_state *state) 1464 { 1465 __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; 1466 1467 switch (port) { 1468 case 0: /* Internal phy */ 1469 case 1: 1470 case 2: 1471 case 3: 1472 case 4: 1473 if (state->interface != PHY_INTERFACE_MODE_NA && 1474 state->interface != PHY_INTERFACE_MODE_GMII) 1475 goto unsupported; 1476 break; 1477 case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ 1478 if (state->interface != PHY_INTERFACE_MODE_NA && 1479 !phy_interface_mode_is_rgmii(state->interface) && 1480 state->interface != PHY_INTERFACE_MODE_MII && 1481 state->interface != PHY_INTERFACE_MODE_GMII) 1482 goto unsupported; 1483 break; 1484 case 6: /* 1st cpu port */ 1485 if (state->interface != PHY_INTERFACE_MODE_NA && 1486 state->interface != PHY_INTERFACE_MODE_RGMII && 1487 state->interface != PHY_INTERFACE_MODE_TRGMII) 1488 goto unsupported; 1489 break; 1490 default: 1491 dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); 1492 unsupported: 1493 linkmode_zero(supported); 1494 return; 1495 } 1496 1497 phylink_set_port_modes(mask); 1498 phylink_set(mask, Autoneg); 1499 1500 if (state->interface == PHY_INTERFACE_MODE_TRGMII) { 1501 phylink_set(mask, 1000baseT_Full); 1502 } else { 1503 phylink_set(mask, 10baseT_Half); 1504 phylink_set(mask, 10baseT_Full); 1505 phylink_set(mask, 100baseT_Half); 1506 phylink_set(mask, 100baseT_Full); 1507 1508 if (state->interface != PHY_INTERFACE_MODE_MII) { 1509 phylink_set(mask, 1000baseT_Half); 1510 phylink_set(mask, 1000baseT_Full); 1511 if (port == 5) 1512 phylink_set(mask, 1000baseX_Full); 1513 } 1514 } 1515 1516 phylink_set(mask, Pause); 1517 phylink_set(mask, Asym_Pause); 1518 1519 linkmode_and(supported, supported, mask); 1520 linkmode_and(state->advertising, state->advertising, mask); 1521 } 1522 1523 static int 1524 mt7530_phylink_mac_link_state(struct dsa_switch *ds, int port, 1525 struct phylink_link_state *state) 1526 { 1527 struct mt7530_priv *priv = ds->priv; 1528 u32 pmsr; 1529 1530 if (port < 0 || port >= MT7530_NUM_PORTS) 1531 return -EINVAL; 1532 1533 pmsr = mt7530_read(priv, MT7530_PMSR_P(port)); 1534 1535 state->link = (pmsr & PMSR_LINK); 1536 state->an_complete = state->link; 1537 state->duplex = !!(pmsr & PMSR_DPX); 1538 1539 switch (pmsr & PMSR_SPEED_MASK) { 1540 case PMSR_SPEED_10: 1541 state->speed = SPEED_10; 1542 break; 1543 case PMSR_SPEED_100: 1544 state->speed = SPEED_100; 1545 break; 1546 case PMSR_SPEED_1000: 1547 state->speed = SPEED_1000; 1548 break; 1549 default: 1550 state->speed = SPEED_UNKNOWN; 1551 break; 1552 } 1553 1554 state->pause &= ~(MLO_PAUSE_RX | MLO_PAUSE_TX); 1555 if (pmsr & PMSR_RX_FC) 1556 state->pause |= MLO_PAUSE_RX; 1557 if (pmsr & PMSR_TX_FC) 1558 state->pause |= MLO_PAUSE_TX; 1559 1560 return 1; 1561 } 1562 1563 static const struct dsa_switch_ops mt7530_switch_ops = { 1564 .get_tag_protocol = mtk_get_tag_protocol, 1565 .setup = mt7530_setup, 1566 .get_strings = mt7530_get_strings, 1567 .phy_read = mt7530_phy_read, 1568 .phy_write = mt7530_phy_write, 1569 .get_ethtool_stats = mt7530_get_ethtool_stats, 1570 .get_sset_count = mt7530_get_sset_count, 1571 .port_enable = mt7530_port_enable, 1572 .port_disable = mt7530_port_disable, 1573 .port_stp_state_set = mt7530_stp_state_set, 1574 .port_bridge_join = mt7530_port_bridge_join, 1575 .port_bridge_leave = mt7530_port_bridge_leave, 1576 .port_fdb_add = mt7530_port_fdb_add, 1577 .port_fdb_del = mt7530_port_fdb_del, 1578 .port_fdb_dump = mt7530_port_fdb_dump, 1579 .port_vlan_filtering = mt7530_port_vlan_filtering, 1580 .port_vlan_prepare = mt7530_port_vlan_prepare, 1581 .port_vlan_add = mt7530_port_vlan_add, 1582 .port_vlan_del = mt7530_port_vlan_del, 1583 .port_mirror_add = mt7530_port_mirror_add, 1584 .port_mirror_del = mt7530_port_mirror_del, 1585 .phylink_validate = mt7530_phylink_validate, 1586 .phylink_mac_link_state = mt7530_phylink_mac_link_state, 1587 .phylink_mac_config = mt7530_phylink_mac_config, 1588 .phylink_mac_link_down = mt7530_phylink_mac_link_down, 1589 .phylink_mac_link_up = mt7530_phylink_mac_link_up, 1590 }; 1591 1592 static const struct of_device_id mt7530_of_match[] = { 1593 { .compatible = "mediatek,mt7621", .data = (void *)ID_MT7621, }, 1594 { .compatible = "mediatek,mt7530", .data = (void *)ID_MT7530, }, 1595 { /* sentinel */ }, 1596 }; 1597 MODULE_DEVICE_TABLE(of, mt7530_of_match); 1598 1599 static int 1600 mt7530_probe(struct mdio_device *mdiodev) 1601 { 1602 struct mt7530_priv *priv; 1603 struct device_node *dn; 1604 1605 dn = mdiodev->dev.of_node; 1606 1607 priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL); 1608 if (!priv) 1609 return -ENOMEM; 1610 1611 priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL); 1612 if (!priv->ds) 1613 return -ENOMEM; 1614 1615 priv->ds->dev = &mdiodev->dev; 1616 priv->ds->num_ports = DSA_MAX_PORTS; 1617 1618 /* Use medatek,mcm property to distinguish hardware type that would 1619 * casues a little bit differences on power-on sequence. 1620 */ 1621 priv->mcm = of_property_read_bool(dn, "mediatek,mcm"); 1622 if (priv->mcm) { 1623 dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n"); 1624 1625 priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm"); 1626 if (IS_ERR(priv->rstc)) { 1627 dev_err(&mdiodev->dev, "Couldn't get our reset line\n"); 1628 return PTR_ERR(priv->rstc); 1629 } 1630 } 1631 1632 /* Get the hardware identifier from the devicetree node. 1633 * We will need it for some of the clock and regulator setup. 1634 */ 1635 priv->id = (unsigned int)(unsigned long) 1636 of_device_get_match_data(&mdiodev->dev); 1637 1638 if (priv->id == ID_MT7530) { 1639 priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core"); 1640 if (IS_ERR(priv->core_pwr)) 1641 return PTR_ERR(priv->core_pwr); 1642 1643 priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io"); 1644 if (IS_ERR(priv->io_pwr)) 1645 return PTR_ERR(priv->io_pwr); 1646 } 1647 1648 /* Not MCM that indicates switch works as the remote standalone 1649 * integrated circuit so the GPIO pin would be used to complete 1650 * the reset, otherwise memory-mapped register accessing used 1651 * through syscon provides in the case of MCM. 1652 */ 1653 if (!priv->mcm) { 1654 priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset", 1655 GPIOD_OUT_LOW); 1656 if (IS_ERR(priv->reset)) { 1657 dev_err(&mdiodev->dev, "Couldn't get our reset line\n"); 1658 return PTR_ERR(priv->reset); 1659 } 1660 } 1661 1662 priv->bus = mdiodev->bus; 1663 priv->dev = &mdiodev->dev; 1664 priv->ds->priv = priv; 1665 priv->ds->ops = &mt7530_switch_ops; 1666 mutex_init(&priv->reg_mutex); 1667 dev_set_drvdata(&mdiodev->dev, priv); 1668 1669 return dsa_register_switch(priv->ds); 1670 } 1671 1672 static void 1673 mt7530_remove(struct mdio_device *mdiodev) 1674 { 1675 struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); 1676 int ret = 0; 1677 1678 ret = regulator_disable(priv->core_pwr); 1679 if (ret < 0) 1680 dev_err(priv->dev, 1681 "Failed to disable core power: %d\n", ret); 1682 1683 ret = regulator_disable(priv->io_pwr); 1684 if (ret < 0) 1685 dev_err(priv->dev, "Failed to disable io pwr: %d\n", 1686 ret); 1687 1688 dsa_unregister_switch(priv->ds); 1689 mutex_destroy(&priv->reg_mutex); 1690 } 1691 1692 static struct mdio_driver mt7530_mdio_driver = { 1693 .probe = mt7530_probe, 1694 .remove = mt7530_remove, 1695 .mdiodrv.driver = { 1696 .name = "mt7530", 1697 .of_match_table = mt7530_of_match, 1698 }, 1699 }; 1700 1701 mdio_module_driver(mt7530_mdio_driver); 1702 1703 MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>"); 1704 MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch"); 1705 MODULE_LICENSE("GPL"); 1706