1 // SPDX-License-Identifier: GPL-2.0 2 /* Microchip LAN937X switch driver main logic 3 * Copyright (C) 2019-2022 Microchip Technology Inc. 4 */ 5 #include <linux/kernel.h> 6 #include <linux/module.h> 7 #include <linux/iopoll.h> 8 #include <linux/phy.h> 9 #include <linux/of_net.h> 10 #include <linux/if_bridge.h> 11 #include <linux/if_vlan.h> 12 #include <linux/math.h> 13 #include <net/dsa.h> 14 #include <net/switchdev.h> 15 16 #include "lan937x_reg.h" 17 #include "ksz_common.h" 18 #include "ksz9477.h" 19 #include "lan937x.h" 20 21 static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) 22 { 23 return regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); 24 } 25 26 static int lan937x_port_cfg(struct ksz_device *dev, int port, int offset, 27 u8 bits, bool set) 28 { 29 return regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset), 30 bits, set ? bits : 0); 31 } 32 33 static int lan937x_enable_spi_indirect_access(struct ksz_device *dev) 34 { 35 u16 data16; 36 int ret; 37 38 /* Enable Phy access through SPI */ 39 ret = lan937x_cfg(dev, REG_GLOBAL_CTRL_0, SW_PHY_REG_BLOCK, false); 40 if (ret < 0) 41 return ret; 42 43 ret = ksz_read16(dev, REG_VPHY_SPECIAL_CTRL__2, &data16); 44 if (ret < 0) 45 return ret; 46 47 /* Allow SPI access */ 48 data16 |= VPHY_SPI_INDIRECT_ENABLE; 49 50 return ksz_write16(dev, REG_VPHY_SPECIAL_CTRL__2, data16); 51 } 52 53 static int lan937x_vphy_ind_addr_wr(struct ksz_device *dev, int addr, int reg) 54 { 55 u16 addr_base = REG_PORT_T1_PHY_CTRL_BASE; 56 u16 temp; 57 58 /* get register address based on the logical port */ 59 temp = PORT_CTRL_ADDR(addr, (addr_base + (reg << 2))); 60 61 return ksz_write16(dev, REG_VPHY_IND_ADDR__2, temp); 62 } 63 64 static int lan937x_internal_phy_write(struct ksz_device *dev, int addr, int reg, 65 u16 val) 66 { 67 unsigned int value; 68 int ret; 69 70 /* Check for internal phy port */ 71 if (!dev->info->internal_phy[addr]) 72 return -EOPNOTSUPP; 73 74 ret = lan937x_vphy_ind_addr_wr(dev, addr, reg); 75 if (ret < 0) 76 return ret; 77 78 /* Write the data to be written to the VPHY reg */ 79 ret = ksz_write16(dev, REG_VPHY_IND_DATA__2, val); 80 if (ret < 0) 81 return ret; 82 83 /* Write the Write En and Busy bit */ 84 ret = ksz_write16(dev, REG_VPHY_IND_CTRL__2, 85 (VPHY_IND_WRITE | VPHY_IND_BUSY)); 86 if (ret < 0) 87 return ret; 88 89 ret = regmap_read_poll_timeout(ksz_regmap_16(dev), REG_VPHY_IND_CTRL__2, 90 value, !(value & VPHY_IND_BUSY), 10, 91 1000); 92 if (ret < 0) { 93 dev_err(dev->dev, "Failed to write phy register\n"); 94 return ret; 95 } 96 97 return 0; 98 } 99 100 static int lan937x_internal_phy_read(struct ksz_device *dev, int addr, int reg, 101 u16 *val) 102 { 103 unsigned int value; 104 int ret; 105 106 /* Check for internal phy port, return 0xffff for non-existent phy */ 107 if (!dev->info->internal_phy[addr]) 108 return 0xffff; 109 110 ret = lan937x_vphy_ind_addr_wr(dev, addr, reg); 111 if (ret < 0) 112 return ret; 113 114 /* Write Read and Busy bit to start the transaction */ 115 ret = ksz_write16(dev, REG_VPHY_IND_CTRL__2, VPHY_IND_BUSY); 116 if (ret < 0) 117 return ret; 118 119 ret = regmap_read_poll_timeout(ksz_regmap_16(dev), REG_VPHY_IND_CTRL__2, 120 value, !(value & VPHY_IND_BUSY), 10, 121 1000); 122 if (ret < 0) { 123 dev_err(dev->dev, "Failed to read phy register\n"); 124 return ret; 125 } 126 127 /* Read the VPHY register which has the PHY data */ 128 return ksz_read16(dev, REG_VPHY_IND_DATA__2, val); 129 } 130 131 int lan937x_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data) 132 { 133 return lan937x_internal_phy_read(dev, addr, reg, data); 134 } 135 136 int lan937x_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val) 137 { 138 return lan937x_internal_phy_write(dev, addr, reg, val); 139 } 140 141 int lan937x_reset_switch(struct ksz_device *dev) 142 { 143 u32 data32; 144 int ret; 145 146 /* reset switch */ 147 ret = lan937x_cfg(dev, REG_SW_OPERATION, SW_RESET, true); 148 if (ret < 0) 149 return ret; 150 151 /* Enable Auto Aging */ 152 ret = lan937x_cfg(dev, REG_SW_LUE_CTRL_1, SW_LINK_AUTO_AGING, true); 153 if (ret < 0) 154 return ret; 155 156 /* disable interrupts */ 157 ret = ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK); 158 if (ret < 0) 159 return ret; 160 161 ret = ksz_write32(dev, REG_SW_INT_STATUS__4, POR_READY_INT); 162 if (ret < 0) 163 return ret; 164 165 ret = ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0xFF); 166 if (ret < 0) 167 return ret; 168 169 return ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32); 170 } 171 172 void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port) 173 { 174 const u32 *masks = dev->info->masks; 175 const u16 *regs = dev->info->regs; 176 struct dsa_switch *ds = dev->ds; 177 u8 member; 178 179 /* enable tag tail for host port */ 180 if (cpu_port) 181 lan937x_port_cfg(dev, port, REG_PORT_CTRL_0, 182 PORT_TAIL_TAG_ENABLE, true); 183 184 /* Enable the Port Queue split */ 185 ksz9477_port_queue_split(dev, port); 186 187 /* set back pressure for half duplex */ 188 lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, 189 true); 190 191 /* enable 802.1p priority */ 192 lan937x_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true); 193 194 if (!dev->info->internal_phy[port]) 195 lan937x_port_cfg(dev, port, regs[P_XMII_CTRL_0], 196 masks[P_MII_TX_FLOW_CTRL] | 197 masks[P_MII_RX_FLOW_CTRL], 198 true); 199 200 if (cpu_port) 201 member = dsa_user_ports(ds); 202 else 203 member = BIT(dsa_upstream_port(ds, port)); 204 205 dev->dev_ops->cfg_port_member(dev, port, member); 206 } 207 208 void lan937x_config_cpu_port(struct dsa_switch *ds) 209 { 210 struct ksz_device *dev = ds->priv; 211 struct dsa_port *dp; 212 213 dsa_switch_for_each_cpu_port(dp, ds) { 214 if (dev->info->cpu_ports & (1 << dp->index)) { 215 dev->cpu_port = dp->index; 216 217 /* enable cpu port */ 218 lan937x_port_setup(dev, dp->index, true); 219 } 220 } 221 222 dsa_switch_for_each_user_port(dp, ds) { 223 ksz_port_stp_state_set(ds, dp->index, BR_STATE_DISABLED); 224 } 225 } 226 227 int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu) 228 { 229 struct dsa_switch *ds = dev->ds; 230 int ret; 231 232 new_mtu += VLAN_ETH_HLEN + ETH_FCS_LEN; 233 234 if (dsa_is_cpu_port(ds, port)) 235 new_mtu += LAN937X_TAG_LEN; 236 237 if (new_mtu >= FR_MIN_SIZE) 238 ret = lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0, 239 PORT_JUMBO_PACKET, true); 240 else 241 ret = lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0, 242 PORT_JUMBO_PACKET, false); 243 if (ret < 0) { 244 dev_err(ds->dev, "failed to enable jumbo\n"); 245 return ret; 246 } 247 248 /* Write the frame size in PORT_MAX_FR_SIZE register */ 249 ret = ksz_pwrite16(dev, port, PORT_MAX_FR_SIZE, new_mtu); 250 if (ret) { 251 dev_err(ds->dev, "failed to update mtu for port %d\n", port); 252 return ret; 253 } 254 255 return 0; 256 } 257 258 int lan937x_set_ageing_time(struct ksz_device *dev, unsigned int msecs) 259 { 260 u32 secs = msecs / 1000; 261 u32 value; 262 int ret; 263 264 value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs); 265 266 ret = ksz_write8(dev, REG_SW_AGE_PERIOD__1, value); 267 if (ret < 0) 268 return ret; 269 270 value = FIELD_GET(SW_AGE_PERIOD_19_8_M, secs); 271 272 return ksz_write16(dev, REG_SW_AGE_PERIOD__2, value); 273 } 274 275 static void lan937x_set_tune_adj(struct ksz_device *dev, int port, 276 u16 reg, u8 val) 277 { 278 u16 data16; 279 280 ksz_pread16(dev, port, reg, &data16); 281 282 /* Update tune Adjust */ 283 data16 |= FIELD_PREP(PORT_TUNE_ADJ, val); 284 ksz_pwrite16(dev, port, reg, data16); 285 286 /* write DLL reset to take effect */ 287 data16 |= PORT_DLL_RESET; 288 ksz_pwrite16(dev, port, reg, data16); 289 } 290 291 static void lan937x_set_rgmii_tx_delay(struct ksz_device *dev, int port) 292 { 293 u8 val; 294 295 /* Apply different codes based on the ports as per characterization 296 * results 297 */ 298 val = (port == LAN937X_RGMII_1_PORT) ? RGMII_1_TX_DELAY_2NS : 299 RGMII_2_TX_DELAY_2NS; 300 301 lan937x_set_tune_adj(dev, port, REG_PORT_XMII_CTRL_5, val); 302 } 303 304 static void lan937x_set_rgmii_rx_delay(struct ksz_device *dev, int port) 305 { 306 u8 val; 307 308 val = (port == LAN937X_RGMII_1_PORT) ? RGMII_1_RX_DELAY_2NS : 309 RGMII_2_RX_DELAY_2NS; 310 311 lan937x_set_tune_adj(dev, port, REG_PORT_XMII_CTRL_4, val); 312 } 313 314 void lan937x_phylink_get_caps(struct ksz_device *dev, int port, 315 struct phylink_config *config) 316 { 317 config->mac_capabilities = MAC_100FD; 318 319 if (dev->info->supports_rgmii[port]) { 320 /* MII/RMII/RGMII ports */ 321 config->mac_capabilities |= MAC_ASYM_PAUSE | MAC_SYM_PAUSE | 322 MAC_100HD | MAC_10 | MAC_1000FD; 323 } 324 } 325 326 void lan937x_setup_rgmii_delay(struct ksz_device *dev, int port) 327 { 328 struct ksz_port *p = &dev->ports[port]; 329 330 if (p->rgmii_tx_val) { 331 lan937x_set_rgmii_tx_delay(dev, port); 332 dev_info(dev->dev, "Applied rgmii tx delay for the port %d\n", 333 port); 334 } 335 336 if (p->rgmii_rx_val) { 337 lan937x_set_rgmii_rx_delay(dev, port); 338 dev_info(dev->dev, "Applied rgmii rx delay for the port %d\n", 339 port); 340 } 341 } 342 343 int lan937x_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val) 344 { 345 return ksz_pwrite32(dev, port, REG_PORT_MTI_CREDIT_INCREMENT, val); 346 } 347 348 int lan937x_switch_init(struct ksz_device *dev) 349 { 350 dev->port_mask = (1 << dev->info->port_cnt) - 1; 351 352 return 0; 353 } 354 355 int lan937x_setup(struct dsa_switch *ds) 356 { 357 struct ksz_device *dev = ds->priv; 358 int ret; 359 360 /* enable Indirect Access from SPI to the VPHY registers */ 361 ret = lan937x_enable_spi_indirect_access(dev); 362 if (ret < 0) { 363 dev_err(dev->dev, "failed to enable spi indirect access"); 364 return ret; 365 } 366 367 /* The VLAN aware is a global setting. Mixed vlan 368 * filterings are not supported. 369 */ 370 ds->vlan_filtering_is_global = true; 371 372 /* Enable aggressive back off for half duplex & UNH mode */ 373 lan937x_cfg(dev, REG_SW_MAC_CTRL_0, 374 (SW_PAUSE_UNH_MODE | SW_NEW_BACKOFF | SW_AGGR_BACKOFF), 375 true); 376 377 /* If NO_EXC_COLLISION_DROP bit is set, the switch will not drop 378 * packets when 16 or more collisions occur 379 */ 380 lan937x_cfg(dev, REG_SW_MAC_CTRL_1, NO_EXC_COLLISION_DROP, true); 381 382 /* enable global MIB counter freeze function */ 383 lan937x_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true); 384 385 /* disable CLK125 & CLK25, 1: disable, 0: enable */ 386 lan937x_cfg(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1, 387 (SW_CLK125_ENB | SW_CLK25_ENB), true); 388 389 return 0; 390 } 391 392 void lan937x_teardown(struct dsa_switch *ds) 393 { 394 395 } 396 397 void lan937x_switch_exit(struct ksz_device *dev) 398 { 399 lan937x_reset_switch(dev); 400 } 401 402 MODULE_AUTHOR("Arun Ramadoss <arun.ramadoss@microchip.com>"); 403 MODULE_DESCRIPTION("Microchip LAN937x Series Switch DSA Driver"); 404 MODULE_LICENSE("GPL"); 405