xref: /linux/drivers/net/dsa/bcm_sf2_cfp.c (revision b60a5b8dcf49af9f2c60ae82e0383ee8e62a9a52)
1 /*
2  * Broadcom Starfighter 2 DSA switch CFP support
3  *
4  * Copyright (C) 2016, Broadcom
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  */
11 
12 #include <linux/list.h>
13 #include <linux/ethtool.h>
14 #include <linux/if_ether.h>
15 #include <linux/in.h>
16 #include <linux/netdevice.h>
17 #include <net/dsa.h>
18 #include <linux/bitmap.h>
19 #include <net/flow_offload.h>
20 
21 #include "bcm_sf2.h"
22 #include "bcm_sf2_regs.h"
23 
24 struct cfp_rule {
25 	int port;
26 	struct ethtool_rx_flow_spec fs;
27 	struct list_head next;
28 };
29 
30 struct cfp_udf_slice_layout {
31 	u8 slices[UDFS_PER_SLICE];
32 	u32 mask_value;
33 	u32 base_offset;
34 };
35 
36 struct cfp_udf_layout {
37 	struct cfp_udf_slice_layout udfs[UDF_NUM_SLICES];
38 };
39 
40 static const u8 zero_slice[UDFS_PER_SLICE] = { };
41 
42 /* UDF slices layout for a TCPv4/UDPv4 specification */
43 static const struct cfp_udf_layout udf_tcpip4_layout = {
44 	.udfs = {
45 		[1] = {
46 			.slices = {
47 				/* End of L2, byte offset 12, src IP[0:15] */
48 				CFG_UDF_EOL2 | 6,
49 				/* End of L2, byte offset 14, src IP[16:31] */
50 				CFG_UDF_EOL2 | 7,
51 				/* End of L2, byte offset 16, dst IP[0:15] */
52 				CFG_UDF_EOL2 | 8,
53 				/* End of L2, byte offset 18, dst IP[16:31] */
54 				CFG_UDF_EOL2 | 9,
55 				/* End of L3, byte offset 0, src port */
56 				CFG_UDF_EOL3 | 0,
57 				/* End of L3, byte offset 2, dst port */
58 				CFG_UDF_EOL3 | 1,
59 				0, 0, 0
60 			},
61 			.mask_value = L3_FRAMING_MASK | IPPROTO_MASK | IP_FRAG,
62 			.base_offset = CORE_UDF_0_A_0_8_PORT_0 + UDF_SLICE_OFFSET,
63 		},
64 	},
65 };
66 
67 /* UDF slices layout for a TCPv6/UDPv6 specification */
68 static const struct cfp_udf_layout udf_tcpip6_layout = {
69 	.udfs = {
70 		[0] = {
71 			.slices = {
72 				/* End of L2, byte offset 8, src IP[0:15] */
73 				CFG_UDF_EOL2 | 4,
74 				/* End of L2, byte offset 10, src IP[16:31] */
75 				CFG_UDF_EOL2 | 5,
76 				/* End of L2, byte offset 12, src IP[32:47] */
77 				CFG_UDF_EOL2 | 6,
78 				/* End of L2, byte offset 14, src IP[48:63] */
79 				CFG_UDF_EOL2 | 7,
80 				/* End of L2, byte offset 16, src IP[64:79] */
81 				CFG_UDF_EOL2 | 8,
82 				/* End of L2, byte offset 18, src IP[80:95] */
83 				CFG_UDF_EOL2 | 9,
84 				/* End of L2, byte offset 20, src IP[96:111] */
85 				CFG_UDF_EOL2 | 10,
86 				/* End of L2, byte offset 22, src IP[112:127] */
87 				CFG_UDF_EOL2 | 11,
88 				/* End of L3, byte offset 0, src port */
89 				CFG_UDF_EOL3 | 0,
90 			},
91 			.mask_value = L3_FRAMING_MASK | IPPROTO_MASK | IP_FRAG,
92 			.base_offset = CORE_UDF_0_B_0_8_PORT_0,
93 		},
94 		[3] = {
95 			.slices = {
96 				/* End of L2, byte offset 24, dst IP[0:15] */
97 				CFG_UDF_EOL2 | 12,
98 				/* End of L2, byte offset 26, dst IP[16:31] */
99 				CFG_UDF_EOL2 | 13,
100 				/* End of L2, byte offset 28, dst IP[32:47] */
101 				CFG_UDF_EOL2 | 14,
102 				/* End of L2, byte offset 30, dst IP[48:63] */
103 				CFG_UDF_EOL2 | 15,
104 				/* End of L2, byte offset 32, dst IP[64:79] */
105 				CFG_UDF_EOL2 | 16,
106 				/* End of L2, byte offset 34, dst IP[80:95] */
107 				CFG_UDF_EOL2 | 17,
108 				/* End of L2, byte offset 36, dst IP[96:111] */
109 				CFG_UDF_EOL2 | 18,
110 				/* End of L2, byte offset 38, dst IP[112:127] */
111 				CFG_UDF_EOL2 | 19,
112 				/* End of L3, byte offset 2, dst port */
113 				CFG_UDF_EOL3 | 1,
114 			},
115 			.mask_value = L3_FRAMING_MASK | IPPROTO_MASK | IP_FRAG,
116 			.base_offset = CORE_UDF_0_D_0_11_PORT_0,
117 		},
118 	},
119 };
120 
121 static inline unsigned int bcm_sf2_get_num_udf_slices(const u8 *layout)
122 {
123 	unsigned int i, count = 0;
124 
125 	for (i = 0; i < UDFS_PER_SLICE; i++) {
126 		if (layout[i] != 0)
127 			count++;
128 	}
129 
130 	return count;
131 }
132 
133 static inline u32 udf_upper_bits(unsigned int num_udf)
134 {
135 	return GENMASK(num_udf - 1, 0) >> (UDFS_PER_SLICE - 1);
136 }
137 
138 static inline u32 udf_lower_bits(unsigned int num_udf)
139 {
140 	return (u8)GENMASK(num_udf - 1, 0);
141 }
142 
143 static unsigned int bcm_sf2_get_slice_number(const struct cfp_udf_layout *l,
144 					     unsigned int start)
145 {
146 	const struct cfp_udf_slice_layout *slice_layout;
147 	unsigned int slice_idx;
148 
149 	for (slice_idx = start; slice_idx < UDF_NUM_SLICES; slice_idx++) {
150 		slice_layout = &l->udfs[slice_idx];
151 		if (memcmp(slice_layout->slices, zero_slice,
152 			   sizeof(zero_slice)))
153 			break;
154 	}
155 
156 	return slice_idx;
157 }
158 
159 static void bcm_sf2_cfp_udf_set(struct bcm_sf2_priv *priv,
160 				const struct cfp_udf_layout *layout,
161 				unsigned int slice_num)
162 {
163 	u32 offset = layout->udfs[slice_num].base_offset;
164 	unsigned int i;
165 
166 	for (i = 0; i < UDFS_PER_SLICE; i++)
167 		core_writel(priv, layout->udfs[slice_num].slices[i],
168 			    offset + i * 4);
169 }
170 
171 static int bcm_sf2_cfp_op(struct bcm_sf2_priv *priv, unsigned int op)
172 {
173 	unsigned int timeout = 1000;
174 	u32 reg;
175 
176 	reg = core_readl(priv, CORE_CFP_ACC);
177 	reg &= ~(OP_SEL_MASK | RAM_SEL_MASK);
178 	reg |= OP_STR_DONE | op;
179 	core_writel(priv, reg, CORE_CFP_ACC);
180 
181 	do {
182 		reg = core_readl(priv, CORE_CFP_ACC);
183 		if (!(reg & OP_STR_DONE))
184 			break;
185 
186 		cpu_relax();
187 	} while (timeout--);
188 
189 	if (!timeout)
190 		return -ETIMEDOUT;
191 
192 	return 0;
193 }
194 
195 static inline void bcm_sf2_cfp_rule_addr_set(struct bcm_sf2_priv *priv,
196 					     unsigned int addr)
197 {
198 	u32 reg;
199 
200 	WARN_ON(addr >= priv->num_cfp_rules);
201 
202 	reg = core_readl(priv, CORE_CFP_ACC);
203 	reg &= ~(XCESS_ADDR_MASK << XCESS_ADDR_SHIFT);
204 	reg |= addr << XCESS_ADDR_SHIFT;
205 	core_writel(priv, reg, CORE_CFP_ACC);
206 }
207 
208 static inline unsigned int bcm_sf2_cfp_rule_size(struct bcm_sf2_priv *priv)
209 {
210 	/* Entry #0 is reserved */
211 	return priv->num_cfp_rules - 1;
212 }
213 
214 static int bcm_sf2_cfp_act_pol_set(struct bcm_sf2_priv *priv,
215 				   unsigned int rule_index,
216 				   int src_port,
217 				   unsigned int port_num,
218 				   unsigned int queue_num,
219 				   bool fwd_map_change)
220 {
221 	int ret;
222 	u32 reg;
223 
224 	/* Replace ARL derived destination with DST_MAP derived, define
225 	 * which port and queue this should be forwarded to.
226 	 */
227 	if (fwd_map_change)
228 		reg = CHANGE_FWRD_MAP_IB_REP_ARL |
229 		      BIT(port_num + DST_MAP_IB_SHIFT) |
230 		      CHANGE_TC | queue_num << NEW_TC_SHIFT;
231 	else
232 		reg = 0;
233 
234 	/* Enable looping back to the original port */
235 	if (src_port == port_num)
236 		reg |= LOOP_BK_EN;
237 
238 	core_writel(priv, reg, CORE_ACT_POL_DATA0);
239 
240 	/* Set classification ID that needs to be put in Broadcom tag */
241 	core_writel(priv, rule_index << CHAIN_ID_SHIFT, CORE_ACT_POL_DATA1);
242 
243 	core_writel(priv, 0, CORE_ACT_POL_DATA2);
244 
245 	/* Configure policer RAM now */
246 	ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | ACT_POL_RAM);
247 	if (ret) {
248 		pr_err("Policer entry at %d failed\n", rule_index);
249 		return ret;
250 	}
251 
252 	/* Disable the policer */
253 	core_writel(priv, POLICER_MODE_DISABLE, CORE_RATE_METER0);
254 
255 	/* Now the rate meter */
256 	ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | RATE_METER_RAM);
257 	if (ret) {
258 		pr_err("Meter entry at %d failed\n", rule_index);
259 		return ret;
260 	}
261 
262 	return 0;
263 }
264 
265 static void bcm_sf2_cfp_slice_ipv4(struct bcm_sf2_priv *priv,
266 				   struct flow_dissector_key_ipv4_addrs *addrs,
267 				   struct flow_dissector_key_ports *ports,
268 				   unsigned int slice_num,
269 				   bool mask)
270 {
271 	u32 reg, offset;
272 
273 	/* C-Tag		[31:24]
274 	 * UDF_n_A8		[23:8]
275 	 * UDF_n_A7		[7:0]
276 	 */
277 	reg = 0;
278 	if (mask)
279 		offset = CORE_CFP_MASK_PORT(4);
280 	else
281 		offset = CORE_CFP_DATA_PORT(4);
282 	core_writel(priv, reg, offset);
283 
284 	/* UDF_n_A7		[31:24]
285 	 * UDF_n_A6		[23:8]
286 	 * UDF_n_A5		[7:0]
287 	 */
288 	reg = be16_to_cpu(ports->dst) >> 8;
289 	if (mask)
290 		offset = CORE_CFP_MASK_PORT(3);
291 	else
292 		offset = CORE_CFP_DATA_PORT(3);
293 	core_writel(priv, reg, offset);
294 
295 	/* UDF_n_A5		[31:24]
296 	 * UDF_n_A4		[23:8]
297 	 * UDF_n_A3		[7:0]
298 	 */
299 	reg = (be16_to_cpu(ports->dst) & 0xff) << 24 |
300 	      (u32)be16_to_cpu(ports->src) << 8 |
301 	      (be32_to_cpu(addrs->dst) & 0x0000ff00) >> 8;
302 	if (mask)
303 		offset = CORE_CFP_MASK_PORT(2);
304 	else
305 		offset = CORE_CFP_DATA_PORT(2);
306 	core_writel(priv, reg, offset);
307 
308 	/* UDF_n_A3		[31:24]
309 	 * UDF_n_A2		[23:8]
310 	 * UDF_n_A1		[7:0]
311 	 */
312 	reg = (u32)(be32_to_cpu(addrs->dst) & 0xff) << 24 |
313 	      (u32)(be32_to_cpu(addrs->dst) >> 16) << 8 |
314 	      (be32_to_cpu(addrs->src) & 0x0000ff00) >> 8;
315 	if (mask)
316 		offset = CORE_CFP_MASK_PORT(1);
317 	else
318 		offset = CORE_CFP_DATA_PORT(1);
319 	core_writel(priv, reg, offset);
320 
321 	/* UDF_n_A1		[31:24]
322 	 * UDF_n_A0		[23:8]
323 	 * Reserved		[7:4]
324 	 * Slice ID		[3:2]
325 	 * Slice valid		[1:0]
326 	 */
327 	reg = (u32)(be32_to_cpu(addrs->src) & 0xff) << 24 |
328 	      (u32)(be32_to_cpu(addrs->src) >> 16) << 8 |
329 	      SLICE_NUM(slice_num) | SLICE_VALID;
330 	if (mask)
331 		offset = CORE_CFP_MASK_PORT(0);
332 	else
333 		offset = CORE_CFP_DATA_PORT(0);
334 	core_writel(priv, reg, offset);
335 }
336 
337 static int bcm_sf2_cfp_ipv4_rule_set(struct bcm_sf2_priv *priv, int port,
338 				     unsigned int port_num,
339 				     unsigned int queue_num,
340 				     struct ethtool_rx_flow_spec *fs)
341 {
342 	struct ethtool_rx_flow_spec_input input = {};
343 	const struct cfp_udf_layout *layout;
344 	unsigned int slice_num, rule_index;
345 	struct ethtool_rx_flow_rule *flow;
346 	struct flow_match_ipv4_addrs ipv4;
347 	struct flow_match_ports ports;
348 	struct flow_match_ip ip;
349 	u8 ip_proto, ip_frag;
350 	u8 num_udf;
351 	u32 reg;
352 	int ret;
353 
354 	switch (fs->flow_type & ~FLOW_EXT) {
355 	case TCP_V4_FLOW:
356 		ip_proto = IPPROTO_TCP;
357 		break;
358 	case UDP_V4_FLOW:
359 		ip_proto = IPPROTO_UDP;
360 		break;
361 	default:
362 		return -EINVAL;
363 	}
364 
365 	ip_frag = be32_to_cpu(fs->m_ext.data[0]);
366 
367 	/* Locate the first rule available */
368 	if (fs->location == RX_CLS_LOC_ANY)
369 		rule_index = find_first_zero_bit(priv->cfp.used,
370 						 priv->num_cfp_rules);
371 	else
372 		rule_index = fs->location;
373 
374 	if (rule_index > bcm_sf2_cfp_rule_size(priv))
375 		return -ENOSPC;
376 
377 	input.fs = fs;
378 	flow = ethtool_rx_flow_rule_create(&input);
379 	if (IS_ERR(flow))
380 		return PTR_ERR(flow);
381 
382 	flow_rule_match_ipv4_addrs(flow->rule, &ipv4);
383 	flow_rule_match_ports(flow->rule, &ports);
384 	flow_rule_match_ip(flow->rule, &ip);
385 
386 	layout = &udf_tcpip4_layout;
387 	/* We only use one UDF slice for now */
388 	slice_num = bcm_sf2_get_slice_number(layout, 0);
389 	if (slice_num == UDF_NUM_SLICES) {
390 		ret = -EINVAL;
391 		goto out_err_flow_rule;
392 	}
393 
394 	num_udf = bcm_sf2_get_num_udf_slices(layout->udfs[slice_num].slices);
395 
396 	/* Apply the UDF layout for this filter */
397 	bcm_sf2_cfp_udf_set(priv, layout, slice_num);
398 
399 	/* Apply to all packets received through this port */
400 	core_writel(priv, BIT(port), CORE_CFP_DATA_PORT(7));
401 
402 	/* Source port map match */
403 	core_writel(priv, 0xff, CORE_CFP_MASK_PORT(7));
404 
405 	/* S-Tag status		[31:30]
406 	 * C-Tag status		[29:28]
407 	 * L2 framing		[27:26]
408 	 * L3 framing		[25:24]
409 	 * IP ToS		[23:16]
410 	 * IP proto		[15:08]
411 	 * IP Fragm		[7]
412 	 * Non 1st frag		[6]
413 	 * IP Authen		[5]
414 	 * TTL range		[4:3]
415 	 * PPPoE session	[2]
416 	 * Reserved		[1]
417 	 * UDF_Valid[8]		[0]
418 	 */
419 	core_writel(priv, ip.key->tos << IPTOS_SHIFT |
420 		    ip_proto << IPPROTO_SHIFT | ip_frag << IP_FRAG_SHIFT |
421 		    udf_upper_bits(num_udf),
422 		    CORE_CFP_DATA_PORT(6));
423 
424 	/* Mask with the specific layout for IPv4 packets */
425 	core_writel(priv, layout->udfs[slice_num].mask_value |
426 		    udf_upper_bits(num_udf), CORE_CFP_MASK_PORT(6));
427 
428 	/* UDF_Valid[7:0]	[31:24]
429 	 * S-Tag		[23:8]
430 	 * C-Tag		[7:0]
431 	 */
432 	core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_DATA_PORT(5));
433 
434 	/* Mask all but valid UDFs */
435 	core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_MASK_PORT(5));
436 
437 	/* Program the match and the mask */
438 	bcm_sf2_cfp_slice_ipv4(priv, ipv4.key, ports.key, slice_num, false);
439 	bcm_sf2_cfp_slice_ipv4(priv, ipv4.mask, ports.mask, SLICE_NUM_MASK, true);
440 
441 	/* Insert into TCAM now */
442 	bcm_sf2_cfp_rule_addr_set(priv, rule_index);
443 
444 	ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
445 	if (ret) {
446 		pr_err("TCAM entry at addr %d failed\n", rule_index);
447 		goto out_err_flow_rule;
448 	}
449 
450 	/* Insert into Action and policer RAMs now */
451 	ret = bcm_sf2_cfp_act_pol_set(priv, rule_index, port, port_num,
452 				      queue_num, true);
453 	if (ret)
454 		goto out_err_flow_rule;
455 
456 	/* Turn on CFP for this rule now */
457 	reg = core_readl(priv, CORE_CFP_CTL_REG);
458 	reg |= BIT(port);
459 	core_writel(priv, reg, CORE_CFP_CTL_REG);
460 
461 	/* Flag the rule as being used and return it */
462 	set_bit(rule_index, priv->cfp.used);
463 	set_bit(rule_index, priv->cfp.unique);
464 	fs->location = rule_index;
465 
466 	return 0;
467 
468 out_err_flow_rule:
469 	ethtool_rx_flow_rule_destroy(flow);
470 	return ret;
471 }
472 
473 static void bcm_sf2_cfp_slice_ipv6(struct bcm_sf2_priv *priv,
474 				   const __be32 *ip6_addr, const __be16 port,
475 				   unsigned int slice_num,
476 				   bool mask)
477 {
478 	u32 reg, tmp, val, offset;
479 
480 	/* C-Tag		[31:24]
481 	 * UDF_n_B8		[23:8]	(port)
482 	 * UDF_n_B7 (upper)	[7:0]	(addr[15:8])
483 	 */
484 	reg = be32_to_cpu(ip6_addr[3]);
485 	val = (u32)be16_to_cpu(port) << 8 | ((reg >> 8) & 0xff);
486 	if (mask)
487 		offset = CORE_CFP_MASK_PORT(4);
488 	else
489 		offset = CORE_CFP_DATA_PORT(4);
490 	core_writel(priv, val, offset);
491 
492 	/* UDF_n_B7 (lower)	[31:24]	(addr[7:0])
493 	 * UDF_n_B6		[23:8] (addr[31:16])
494 	 * UDF_n_B5 (upper)	[7:0] (addr[47:40])
495 	 */
496 	tmp = be32_to_cpu(ip6_addr[2]);
497 	val = (u32)(reg & 0xff) << 24 | (u32)(reg >> 16) << 8 |
498 	      ((tmp >> 8) & 0xff);
499 	if (mask)
500 		offset = CORE_CFP_MASK_PORT(3);
501 	else
502 		offset = CORE_CFP_DATA_PORT(3);
503 	core_writel(priv, val, offset);
504 
505 	/* UDF_n_B5 (lower)	[31:24] (addr[39:32])
506 	 * UDF_n_B4		[23:8] (addr[63:48])
507 	 * UDF_n_B3 (upper)	[7:0] (addr[79:72])
508 	 */
509 	reg = be32_to_cpu(ip6_addr[1]);
510 	val = (u32)(tmp & 0xff) << 24 | (u32)(tmp >> 16) << 8 |
511 	      ((reg >> 8) & 0xff);
512 	if (mask)
513 		offset = CORE_CFP_MASK_PORT(2);
514 	else
515 		offset = CORE_CFP_DATA_PORT(2);
516 	core_writel(priv, val, offset);
517 
518 	/* UDF_n_B3 (lower)	[31:24] (addr[71:64])
519 	 * UDF_n_B2		[23:8] (addr[95:80])
520 	 * UDF_n_B1 (upper)	[7:0] (addr[111:104])
521 	 */
522 	tmp = be32_to_cpu(ip6_addr[0]);
523 	val = (u32)(reg & 0xff) << 24 | (u32)(reg >> 16) << 8 |
524 	      ((tmp >> 8) & 0xff);
525 	if (mask)
526 		offset = CORE_CFP_MASK_PORT(1);
527 	else
528 		offset = CORE_CFP_DATA_PORT(1);
529 	core_writel(priv, val, offset);
530 
531 	/* UDF_n_B1 (lower)	[31:24] (addr[103:96])
532 	 * UDF_n_B0		[23:8] (addr[127:112])
533 	 * Reserved		[7:4]
534 	 * Slice ID		[3:2]
535 	 * Slice valid		[1:0]
536 	 */
537 	reg = (u32)(tmp & 0xff) << 24 | (u32)(tmp >> 16) << 8 |
538 	       SLICE_NUM(slice_num) | SLICE_VALID;
539 	if (mask)
540 		offset = CORE_CFP_MASK_PORT(0);
541 	else
542 		offset = CORE_CFP_DATA_PORT(0);
543 	core_writel(priv, reg, offset);
544 }
545 
546 static struct cfp_rule *bcm_sf2_cfp_rule_find(struct bcm_sf2_priv *priv,
547 					      int port, u32 location)
548 {
549 	struct cfp_rule *rule = NULL;
550 
551 	list_for_each_entry(rule, &priv->cfp.rules_list, next) {
552 		if (rule->port == port && rule->fs.location == location)
553 			break;
554 	}
555 
556 	return rule;
557 }
558 
559 static int bcm_sf2_cfp_rule_cmp(struct bcm_sf2_priv *priv, int port,
560 				struct ethtool_rx_flow_spec *fs)
561 {
562 	struct cfp_rule *rule = NULL;
563 	size_t fs_size = 0;
564 	int ret = 1;
565 
566 	if (list_empty(&priv->cfp.rules_list))
567 		return ret;
568 
569 	list_for_each_entry(rule, &priv->cfp.rules_list, next) {
570 		ret = 1;
571 		if (rule->port != port)
572 			continue;
573 
574 		if (rule->fs.flow_type != fs->flow_type ||
575 		    rule->fs.ring_cookie != fs->ring_cookie ||
576 		    rule->fs.m_ext.data[0] != fs->m_ext.data[0])
577 			continue;
578 
579 		switch (fs->flow_type & ~FLOW_EXT) {
580 		case TCP_V6_FLOW:
581 		case UDP_V6_FLOW:
582 			fs_size = sizeof(struct ethtool_tcpip6_spec);
583 			break;
584 		case TCP_V4_FLOW:
585 		case UDP_V4_FLOW:
586 			fs_size = sizeof(struct ethtool_tcpip4_spec);
587 			break;
588 		default:
589 			continue;
590 		}
591 
592 		ret = memcmp(&rule->fs.h_u, &fs->h_u, fs_size);
593 		ret |= memcmp(&rule->fs.m_u, &fs->m_u, fs_size);
594 		if (ret == 0)
595 			break;
596 	}
597 
598 	return ret;
599 }
600 
601 static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv *priv, int port,
602 				     unsigned int port_num,
603 				     unsigned int queue_num,
604 				     struct ethtool_rx_flow_spec *fs)
605 {
606 	struct ethtool_rx_flow_spec_input input = {};
607 	unsigned int slice_num, rule_index[2];
608 	const struct cfp_udf_layout *layout;
609 	struct ethtool_rx_flow_rule *flow;
610 	struct flow_match_ipv6_addrs ipv6;
611 	struct flow_match_ports ports;
612 	u8 ip_proto, ip_frag;
613 	int ret = 0;
614 	u8 num_udf;
615 	u32 reg;
616 
617 	switch (fs->flow_type & ~FLOW_EXT) {
618 	case TCP_V6_FLOW:
619 		ip_proto = IPPROTO_TCP;
620 		break;
621 	case UDP_V6_FLOW:
622 		ip_proto = IPPROTO_UDP;
623 		break;
624 	default:
625 		return -EINVAL;
626 	}
627 
628 	ip_frag = be32_to_cpu(fs->m_ext.data[0]);
629 
630 	layout = &udf_tcpip6_layout;
631 	slice_num = bcm_sf2_get_slice_number(layout, 0);
632 	if (slice_num == UDF_NUM_SLICES)
633 		return -EINVAL;
634 
635 	num_udf = bcm_sf2_get_num_udf_slices(layout->udfs[slice_num].slices);
636 
637 	/* Negotiate two indexes, one for the second half which we are chained
638 	 * from, which is what we will return to user-space, and a second one
639 	 * which is used to store its first half. That first half does not
640 	 * allow any choice of placement, so it just needs to find the next
641 	 * available bit. We return the second half as fs->location because
642 	 * that helps with the rule lookup later on since the second half is
643 	 * chained from its first half, we can easily identify IPv6 CFP rules
644 	 * by looking whether they carry a CHAIN_ID.
645 	 *
646 	 * We also want the second half to have a lower rule_index than its
647 	 * first half because the HW search is by incrementing addresses.
648 	 */
649 	if (fs->location == RX_CLS_LOC_ANY)
650 		rule_index[1] = find_first_zero_bit(priv->cfp.used,
651 						    priv->num_cfp_rules);
652 	else
653 		rule_index[1] = fs->location;
654 	if (rule_index[1] > bcm_sf2_cfp_rule_size(priv))
655 		return -ENOSPC;
656 
657 	/* Flag it as used (cleared on error path) such that we can immediately
658 	 * obtain a second one to chain from.
659 	 */
660 	set_bit(rule_index[1], priv->cfp.used);
661 
662 	rule_index[0] = find_first_zero_bit(priv->cfp.used,
663 					    priv->num_cfp_rules);
664 	if (rule_index[0] > bcm_sf2_cfp_rule_size(priv)) {
665 		ret = -ENOSPC;
666 		goto out_err;
667 	}
668 
669 	input.fs = fs;
670 	flow = ethtool_rx_flow_rule_create(&input);
671 	if (IS_ERR(flow)) {
672 		ret = PTR_ERR(flow);
673 		goto out_err;
674 	}
675 	flow_rule_match_ipv6_addrs(flow->rule, &ipv6);
676 	flow_rule_match_ports(flow->rule, &ports);
677 
678 	/* Apply the UDF layout for this filter */
679 	bcm_sf2_cfp_udf_set(priv, layout, slice_num);
680 
681 	/* Apply to all packets received through this port */
682 	core_writel(priv, BIT(port), CORE_CFP_DATA_PORT(7));
683 
684 	/* Source port map match */
685 	core_writel(priv, 0xff, CORE_CFP_MASK_PORT(7));
686 
687 	/* S-Tag status		[31:30]
688 	 * C-Tag status		[29:28]
689 	 * L2 framing		[27:26]
690 	 * L3 framing		[25:24]
691 	 * IP ToS		[23:16]
692 	 * IP proto		[15:08]
693 	 * IP Fragm		[7]
694 	 * Non 1st frag		[6]
695 	 * IP Authen		[5]
696 	 * TTL range		[4:3]
697 	 * PPPoE session	[2]
698 	 * Reserved		[1]
699 	 * UDF_Valid[8]		[0]
700 	 */
701 	reg = 1 << L3_FRAMING_SHIFT | ip_proto << IPPROTO_SHIFT |
702 		ip_frag << IP_FRAG_SHIFT | udf_upper_bits(num_udf);
703 	core_writel(priv, reg, CORE_CFP_DATA_PORT(6));
704 
705 	/* Mask with the specific layout for IPv6 packets including
706 	 * UDF_Valid[8]
707 	 */
708 	reg = layout->udfs[slice_num].mask_value | udf_upper_bits(num_udf);
709 	core_writel(priv, reg, CORE_CFP_MASK_PORT(6));
710 
711 	/* UDF_Valid[7:0]	[31:24]
712 	 * S-Tag		[23:8]
713 	 * C-Tag		[7:0]
714 	 */
715 	core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_DATA_PORT(5));
716 
717 	/* Mask all but valid UDFs */
718 	core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_MASK_PORT(5));
719 
720 	/* Slice the IPv6 source address and port */
721 	bcm_sf2_cfp_slice_ipv6(priv, ipv6.key->src.in6_u.u6_addr32,
722 			       ports.key->src, slice_num, false);
723 	bcm_sf2_cfp_slice_ipv6(priv, ipv6.mask->src.in6_u.u6_addr32,
724 			       ports.mask->src, SLICE_NUM_MASK, true);
725 
726 	/* Insert into TCAM now because we need to insert a second rule */
727 	bcm_sf2_cfp_rule_addr_set(priv, rule_index[0]);
728 
729 	ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
730 	if (ret) {
731 		pr_err("TCAM entry at addr %d failed\n", rule_index[0]);
732 		goto out_err_flow_rule;
733 	}
734 
735 	/* Insert into Action and policer RAMs now */
736 	ret = bcm_sf2_cfp_act_pol_set(priv, rule_index[0], port, port_num,
737 				      queue_num, false);
738 	if (ret)
739 		goto out_err_flow_rule;
740 
741 	/* Now deal with the second slice to chain this rule */
742 	slice_num = bcm_sf2_get_slice_number(layout, slice_num + 1);
743 	if (slice_num == UDF_NUM_SLICES) {
744 		ret = -EINVAL;
745 		goto out_err_flow_rule;
746 	}
747 
748 	num_udf = bcm_sf2_get_num_udf_slices(layout->udfs[slice_num].slices);
749 
750 	/* Apply the UDF layout for this filter */
751 	bcm_sf2_cfp_udf_set(priv, layout, slice_num);
752 
753 	/* Chained rule, source port match is coming from the rule we are
754 	 * chained from.
755 	 */
756 	core_writel(priv, 0, CORE_CFP_DATA_PORT(7));
757 	core_writel(priv, 0, CORE_CFP_MASK_PORT(7));
758 
759 	/*
760 	 * CHAIN ID		[31:24] chain to previous slice
761 	 * Reserved		[23:20]
762 	 * UDF_Valid[11:8]	[19:16]
763 	 * UDF_Valid[7:0]	[15:8]
764 	 * UDF_n_D11		[7:0]
765 	 */
766 	reg = rule_index[0] << 24 | udf_upper_bits(num_udf) << 16 |
767 		udf_lower_bits(num_udf) << 8;
768 	core_writel(priv, reg, CORE_CFP_DATA_PORT(6));
769 
770 	/* Mask all except chain ID, UDF Valid[8] and UDF Valid[7:0] */
771 	reg = XCESS_ADDR_MASK << 24 | udf_upper_bits(num_udf) << 16 |
772 		udf_lower_bits(num_udf) << 8;
773 	core_writel(priv, reg, CORE_CFP_MASK_PORT(6));
774 
775 	/* Don't care */
776 	core_writel(priv, 0, CORE_CFP_DATA_PORT(5));
777 
778 	/* Mask all */
779 	core_writel(priv, 0, CORE_CFP_MASK_PORT(5));
780 
781 	bcm_sf2_cfp_slice_ipv6(priv, ipv6.key->dst.in6_u.u6_addr32,
782 			       ports.key->dst, slice_num, false);
783 	bcm_sf2_cfp_slice_ipv6(priv, ipv6.mask->dst.in6_u.u6_addr32,
784 			       ports.key->dst, SLICE_NUM_MASK, true);
785 
786 	/* Insert into TCAM now */
787 	bcm_sf2_cfp_rule_addr_set(priv, rule_index[1]);
788 
789 	ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
790 	if (ret) {
791 		pr_err("TCAM entry at addr %d failed\n", rule_index[1]);
792 		goto out_err_flow_rule;
793 	}
794 
795 	/* Insert into Action and policer RAMs now, set chain ID to
796 	 * the one we are chained to
797 	 */
798 	ret = bcm_sf2_cfp_act_pol_set(priv, rule_index[1], port, port_num,
799 				      queue_num, true);
800 	if (ret)
801 		goto out_err_flow_rule;
802 
803 	/* Turn on CFP for this rule now */
804 	reg = core_readl(priv, CORE_CFP_CTL_REG);
805 	reg |= BIT(port);
806 	core_writel(priv, reg, CORE_CFP_CTL_REG);
807 
808 	/* Flag the second half rule as being used now, return it as the
809 	 * location, and flag it as unique while dumping rules
810 	 */
811 	set_bit(rule_index[0], priv->cfp.used);
812 	set_bit(rule_index[1], priv->cfp.unique);
813 	fs->location = rule_index[1];
814 
815 	return ret;
816 
817 out_err_flow_rule:
818 	ethtool_rx_flow_rule_destroy(flow);
819 out_err:
820 	clear_bit(rule_index[1], priv->cfp.used);
821 	return ret;
822 }
823 
824 static int bcm_sf2_cfp_rule_insert(struct dsa_switch *ds, int port,
825 				   struct ethtool_rx_flow_spec *fs)
826 {
827 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
828 	s8 cpu_port = ds->ports[port].cpu_dp->index;
829 	__u64 ring_cookie = fs->ring_cookie;
830 	unsigned int queue_num, port_num;
831 	int ret;
832 
833 	/* This rule is a Wake-on-LAN filter and we must specifically
834 	 * target the CPU port in order for it to be working.
835 	 */
836 	if (ring_cookie == RX_CLS_FLOW_WAKE)
837 		ring_cookie = cpu_port * SF2_NUM_EGRESS_QUEUES;
838 
839 	/* We do not support discarding packets, check that the
840 	 * destination port is enabled and that we are within the
841 	 * number of ports supported by the switch
842 	 */
843 	port_num = ring_cookie / SF2_NUM_EGRESS_QUEUES;
844 
845 	if (ring_cookie == RX_CLS_FLOW_DISC ||
846 	    !(dsa_is_user_port(ds, port_num) ||
847 	      dsa_is_cpu_port(ds, port_num)) ||
848 	    port_num >= priv->hw_params.num_ports)
849 		return -EINVAL;
850 	/*
851 	 * We have a small oddity where Port 6 just does not have a
852 	 * valid bit here (so we substract by one).
853 	 */
854 	queue_num = ring_cookie % SF2_NUM_EGRESS_QUEUES;
855 	if (port_num >= 7)
856 		port_num -= 1;
857 
858 	switch (fs->flow_type & ~FLOW_EXT) {
859 	case TCP_V4_FLOW:
860 	case UDP_V4_FLOW:
861 		ret = bcm_sf2_cfp_ipv4_rule_set(priv, port, port_num,
862 						queue_num, fs);
863 		break;
864 	case TCP_V6_FLOW:
865 	case UDP_V6_FLOW:
866 		ret = bcm_sf2_cfp_ipv6_rule_set(priv, port, port_num,
867 						queue_num, fs);
868 		break;
869 	default:
870 		ret = -EINVAL;
871 		break;
872 	}
873 
874 	return ret;
875 }
876 
877 static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port,
878 				struct ethtool_rx_flow_spec *fs)
879 {
880 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
881 	struct cfp_rule *rule = NULL;
882 	int ret = -EINVAL;
883 
884 	/* Check for unsupported extensions */
885 	if ((fs->flow_type & FLOW_EXT) && (fs->m_ext.vlan_etype ||
886 	     fs->m_ext.data[1]))
887 		return -EINVAL;
888 
889 	if (fs->location != RX_CLS_LOC_ANY &&
890 	    test_bit(fs->location, priv->cfp.used))
891 		return -EBUSY;
892 
893 	if (fs->location != RX_CLS_LOC_ANY &&
894 	    fs->location > bcm_sf2_cfp_rule_size(priv))
895 		return -EINVAL;
896 
897 	ret = bcm_sf2_cfp_rule_cmp(priv, port, fs);
898 	if (ret == 0)
899 		return -EEXIST;
900 
901 	rule = kzalloc(sizeof(*rule), GFP_KERNEL);
902 	if (!rule)
903 		return -ENOMEM;
904 
905 	ret = bcm_sf2_cfp_rule_insert(ds, port, fs);
906 	if (ret) {
907 		kfree(rule);
908 		return ret;
909 	}
910 
911 	rule->port = port;
912 	memcpy(&rule->fs, fs, sizeof(*fs));
913 	list_add_tail(&rule->next, &priv->cfp.rules_list);
914 
915 	return ret;
916 }
917 
918 static int bcm_sf2_cfp_rule_del_one(struct bcm_sf2_priv *priv, int port,
919 				    u32 loc, u32 *next_loc)
920 {
921 	int ret;
922 	u32 reg;
923 
924 	/* Indicate which rule we want to read */
925 	bcm_sf2_cfp_rule_addr_set(priv, loc);
926 
927 	ret =  bcm_sf2_cfp_op(priv, OP_SEL_READ | TCAM_SEL);
928 	if (ret)
929 		return ret;
930 
931 	/* Check if this is possibly an IPv6 rule that would
932 	 * indicate we need to delete its companion rule
933 	 * as well
934 	 */
935 	reg = core_readl(priv, CORE_CFP_DATA_PORT(6));
936 	if (next_loc)
937 		*next_loc = (reg >> 24) & CHAIN_ID_MASK;
938 
939 	/* Clear its valid bits */
940 	reg = core_readl(priv, CORE_CFP_DATA_PORT(0));
941 	reg &= ~SLICE_VALID;
942 	core_writel(priv, reg, CORE_CFP_DATA_PORT(0));
943 
944 	/* Write back this entry into the TCAM now */
945 	ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
946 	if (ret)
947 		return ret;
948 
949 	clear_bit(loc, priv->cfp.used);
950 	clear_bit(loc, priv->cfp.unique);
951 
952 	return 0;
953 }
954 
955 static int bcm_sf2_cfp_rule_remove(struct bcm_sf2_priv *priv, int port,
956 				   u32 loc)
957 {
958 	u32 next_loc = 0;
959 	int ret;
960 
961 	ret = bcm_sf2_cfp_rule_del_one(priv, port, loc, &next_loc);
962 	if (ret)
963 		return ret;
964 
965 	/* If this was an IPv6 rule, delete is companion rule too */
966 	if (next_loc)
967 		ret = bcm_sf2_cfp_rule_del_one(priv, port, next_loc, NULL);
968 
969 	return ret;
970 }
971 
972 static int bcm_sf2_cfp_rule_del(struct bcm_sf2_priv *priv, int port, u32 loc)
973 {
974 	struct cfp_rule *rule;
975 	int ret;
976 
977 	/* Refuse deleting unused rules, and those that are not unique since
978 	 * that could leave IPv6 rules with one of the chained rule in the
979 	 * table.
980 	 */
981 	if (!test_bit(loc, priv->cfp.unique) || loc == 0)
982 		return -EINVAL;
983 
984 	rule = bcm_sf2_cfp_rule_find(priv, port, loc);
985 	if (!rule)
986 		return -EINVAL;
987 
988 	ret = bcm_sf2_cfp_rule_remove(priv, port, loc);
989 
990 	list_del(&rule->next);
991 	kfree(rule);
992 
993 	return ret;
994 }
995 
996 static void bcm_sf2_invert_masks(struct ethtool_rx_flow_spec *flow)
997 {
998 	unsigned int i;
999 
1000 	for (i = 0; i < sizeof(flow->m_u); i++)
1001 		flow->m_u.hdata[i] ^= 0xff;
1002 
1003 	flow->m_ext.vlan_etype ^= cpu_to_be16(~0);
1004 	flow->m_ext.vlan_tci ^= cpu_to_be16(~0);
1005 	flow->m_ext.data[0] ^= cpu_to_be32(~0);
1006 	flow->m_ext.data[1] ^= cpu_to_be32(~0);
1007 }
1008 
1009 static int bcm_sf2_cfp_rule_get(struct bcm_sf2_priv *priv, int port,
1010 				struct ethtool_rxnfc *nfc)
1011 {
1012 	struct cfp_rule *rule;
1013 
1014 	rule = bcm_sf2_cfp_rule_find(priv, port, nfc->fs.location);
1015 	if (!rule)
1016 		return -EINVAL;
1017 
1018 	memcpy(&nfc->fs, &rule->fs, sizeof(rule->fs));
1019 
1020 	bcm_sf2_invert_masks(&nfc->fs);
1021 
1022 	/* Put the TCAM size here */
1023 	nfc->data = bcm_sf2_cfp_rule_size(priv);
1024 
1025 	return 0;
1026 }
1027 
1028 /* We implement the search doing a TCAM search operation */
1029 static int bcm_sf2_cfp_rule_get_all(struct bcm_sf2_priv *priv,
1030 				    int port, struct ethtool_rxnfc *nfc,
1031 				    u32 *rule_locs)
1032 {
1033 	unsigned int index = 1, rules_cnt = 0;
1034 
1035 	for_each_set_bit_from(index, priv->cfp.unique, priv->num_cfp_rules) {
1036 		rule_locs[rules_cnt] = index;
1037 		rules_cnt++;
1038 	}
1039 
1040 	/* Put the TCAM size here */
1041 	nfc->data = bcm_sf2_cfp_rule_size(priv);
1042 	nfc->rule_cnt = rules_cnt;
1043 
1044 	return 0;
1045 }
1046 
1047 int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port,
1048 		      struct ethtool_rxnfc *nfc, u32 *rule_locs)
1049 {
1050 	struct net_device *p = ds->ports[port].cpu_dp->master;
1051 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
1052 	int ret = 0;
1053 
1054 	mutex_lock(&priv->cfp.lock);
1055 
1056 	switch (nfc->cmd) {
1057 	case ETHTOOL_GRXCLSRLCNT:
1058 		/* Subtract the default, unusable rule */
1059 		nfc->rule_cnt = bitmap_weight(priv->cfp.unique,
1060 					      priv->num_cfp_rules) - 1;
1061 		/* We support specifying rule locations */
1062 		nfc->data |= RX_CLS_LOC_SPECIAL;
1063 		break;
1064 	case ETHTOOL_GRXCLSRULE:
1065 		ret = bcm_sf2_cfp_rule_get(priv, port, nfc);
1066 		break;
1067 	case ETHTOOL_GRXCLSRLALL:
1068 		ret = bcm_sf2_cfp_rule_get_all(priv, port, nfc, rule_locs);
1069 		break;
1070 	default:
1071 		ret = -EOPNOTSUPP;
1072 		break;
1073 	}
1074 
1075 	mutex_unlock(&priv->cfp.lock);
1076 
1077 	if (ret)
1078 		return ret;
1079 
1080 	/* Pass up the commands to the attached master network device */
1081 	if (p->ethtool_ops->get_rxnfc) {
1082 		ret = p->ethtool_ops->get_rxnfc(p, nfc, rule_locs);
1083 		if (ret == -EOPNOTSUPP)
1084 			ret = 0;
1085 	}
1086 
1087 	return ret;
1088 }
1089 
1090 int bcm_sf2_set_rxnfc(struct dsa_switch *ds, int port,
1091 		      struct ethtool_rxnfc *nfc)
1092 {
1093 	struct net_device *p = ds->ports[port].cpu_dp->master;
1094 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
1095 	int ret = 0;
1096 
1097 	mutex_lock(&priv->cfp.lock);
1098 
1099 	switch (nfc->cmd) {
1100 	case ETHTOOL_SRXCLSRLINS:
1101 		ret = bcm_sf2_cfp_rule_set(ds, port, &nfc->fs);
1102 		break;
1103 
1104 	case ETHTOOL_SRXCLSRLDEL:
1105 		ret = bcm_sf2_cfp_rule_del(priv, port, nfc->fs.location);
1106 		break;
1107 	default:
1108 		ret = -EOPNOTSUPP;
1109 		break;
1110 	}
1111 
1112 	mutex_unlock(&priv->cfp.lock);
1113 
1114 	if (ret)
1115 		return ret;
1116 
1117 	/* Pass up the commands to the attached master network device.
1118 	 * This can fail, so rollback the operation if we need to.
1119 	 */
1120 	if (p->ethtool_ops->set_rxnfc) {
1121 		ret = p->ethtool_ops->set_rxnfc(p, nfc);
1122 		if (ret && ret != -EOPNOTSUPP) {
1123 			mutex_lock(&priv->cfp.lock);
1124 			bcm_sf2_cfp_rule_del(priv, port, nfc->fs.location);
1125 			mutex_unlock(&priv->cfp.lock);
1126 		} else {
1127 			ret = 0;
1128 		}
1129 	}
1130 
1131 	return ret;
1132 }
1133 
1134 int bcm_sf2_cfp_rst(struct bcm_sf2_priv *priv)
1135 {
1136 	unsigned int timeout = 1000;
1137 	u32 reg;
1138 
1139 	reg = core_readl(priv, CORE_CFP_ACC);
1140 	reg |= TCAM_RESET;
1141 	core_writel(priv, reg, CORE_CFP_ACC);
1142 
1143 	do {
1144 		reg = core_readl(priv, CORE_CFP_ACC);
1145 		if (!(reg & TCAM_RESET))
1146 			break;
1147 
1148 		cpu_relax();
1149 	} while (timeout--);
1150 
1151 	if (!timeout)
1152 		return -ETIMEDOUT;
1153 
1154 	return 0;
1155 }
1156 
1157 void bcm_sf2_cfp_exit(struct dsa_switch *ds)
1158 {
1159 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
1160 	struct cfp_rule *rule, *n;
1161 
1162 	if (list_empty(&priv->cfp.rules_list))
1163 		return;
1164 
1165 	list_for_each_entry_safe_reverse(rule, n, &priv->cfp.rules_list, next)
1166 		bcm_sf2_cfp_rule_del(priv, rule->port, rule->fs.location);
1167 }
1168 
1169 int bcm_sf2_cfp_resume(struct dsa_switch *ds)
1170 {
1171 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
1172 	struct cfp_rule *rule;
1173 	int ret = 0;
1174 	u32 reg;
1175 
1176 	if (list_empty(&priv->cfp.rules_list))
1177 		return ret;
1178 
1179 	reg = core_readl(priv, CORE_CFP_CTL_REG);
1180 	reg &= ~CFP_EN_MAP_MASK;
1181 	core_writel(priv, reg, CORE_CFP_CTL_REG);
1182 
1183 	ret = bcm_sf2_cfp_rst(priv);
1184 	if (ret)
1185 		return ret;
1186 
1187 	list_for_each_entry(rule, &priv->cfp.rules_list, next) {
1188 		ret = bcm_sf2_cfp_rule_remove(priv, rule->port,
1189 					      rule->fs.location);
1190 		if (ret) {
1191 			dev_err(ds->dev, "failed to remove rule\n");
1192 			return ret;
1193 		}
1194 
1195 		ret = bcm_sf2_cfp_rule_insert(ds, rule->port, &rule->fs);
1196 		if (ret) {
1197 			dev_err(ds->dev, "failed to restore rule\n");
1198 			return ret;
1199 		}
1200 	}
1201 
1202 	return ret;
1203 }
1204 
1205 static const struct bcm_sf2_cfp_stat {
1206 	unsigned int offset;
1207 	unsigned int ram_loc;
1208 	const char *name;
1209 } bcm_sf2_cfp_stats[] = {
1210 	{
1211 		.offset = CORE_STAT_GREEN_CNTR,
1212 		.ram_loc = GREEN_STAT_RAM,
1213 		.name = "Green"
1214 	},
1215 	{
1216 		.offset = CORE_STAT_YELLOW_CNTR,
1217 		.ram_loc = YELLOW_STAT_RAM,
1218 		.name = "Yellow"
1219 	},
1220 	{
1221 		.offset = CORE_STAT_RED_CNTR,
1222 		.ram_loc = RED_STAT_RAM,
1223 		.name = "Red"
1224 	},
1225 };
1226 
1227 void bcm_sf2_cfp_get_strings(struct dsa_switch *ds, int port,
1228 			     u32 stringset, uint8_t *data)
1229 {
1230 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
1231 	unsigned int s = ARRAY_SIZE(bcm_sf2_cfp_stats);
1232 	char buf[ETH_GSTRING_LEN];
1233 	unsigned int i, j, iter;
1234 
1235 	if (stringset != ETH_SS_STATS)
1236 		return;
1237 
1238 	for (i = 1; i < priv->num_cfp_rules; i++) {
1239 		for (j = 0; j < s; j++) {
1240 			snprintf(buf, sizeof(buf),
1241 				 "CFP%03d_%sCntr",
1242 				 i, bcm_sf2_cfp_stats[j].name);
1243 			iter = (i - 1) * s + j;
1244 			strlcpy(data + iter * ETH_GSTRING_LEN,
1245 				buf, ETH_GSTRING_LEN);
1246 		}
1247 	}
1248 }
1249 
1250 void bcm_sf2_cfp_get_ethtool_stats(struct dsa_switch *ds, int port,
1251 				   uint64_t *data)
1252 {
1253 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
1254 	unsigned int s = ARRAY_SIZE(bcm_sf2_cfp_stats);
1255 	const struct bcm_sf2_cfp_stat *stat;
1256 	unsigned int i, j, iter;
1257 	struct cfp_rule *rule;
1258 	int ret;
1259 
1260 	mutex_lock(&priv->cfp.lock);
1261 	for (i = 1; i < priv->num_cfp_rules; i++) {
1262 		rule = bcm_sf2_cfp_rule_find(priv, port, i);
1263 		if (!rule)
1264 			continue;
1265 
1266 		for (j = 0; j < s; j++) {
1267 			stat = &bcm_sf2_cfp_stats[j];
1268 
1269 			bcm_sf2_cfp_rule_addr_set(priv, i);
1270 			ret = bcm_sf2_cfp_op(priv, stat->ram_loc | OP_SEL_READ);
1271 			if (ret)
1272 				continue;
1273 
1274 			iter = (i - 1) * s + j;
1275 			data[iter] = core_readl(priv, stat->offset);
1276 		}
1277 
1278 	}
1279 	mutex_unlock(&priv->cfp.lock);
1280 }
1281 
1282 int bcm_sf2_cfp_get_sset_count(struct dsa_switch *ds, int port, int sset)
1283 {
1284 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
1285 
1286 	if (sset != ETH_SS_STATS)
1287 		return 0;
1288 
1289 	/* 3 counters per CFP rules */
1290 	return (priv->num_cfp_rules - 1) * ARRAY_SIZE(bcm_sf2_cfp_stats);
1291 }
1292