1 /* 2 * B53 switch driver main logic 3 * 4 * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org> 5 * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com> 6 * 7 * Permission to use, copy, modify, and/or distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 20 #include <linux/delay.h> 21 #include <linux/export.h> 22 #include <linux/gpio.h> 23 #include <linux/kernel.h> 24 #include <linux/module.h> 25 #include <linux/platform_data/b53.h> 26 #include <linux/phy.h> 27 #include <linux/phylink.h> 28 #include <linux/etherdevice.h> 29 #include <linux/if_bridge.h> 30 #include <net/dsa.h> 31 32 #include "b53_regs.h" 33 #include "b53_priv.h" 34 35 struct b53_mib_desc { 36 u8 size; 37 u8 offset; 38 const char *name; 39 }; 40 41 /* BCM5365 MIB counters */ 42 static const struct b53_mib_desc b53_mibs_65[] = { 43 { 8, 0x00, "TxOctets" }, 44 { 4, 0x08, "TxDropPkts" }, 45 { 4, 0x10, "TxBroadcastPkts" }, 46 { 4, 0x14, "TxMulticastPkts" }, 47 { 4, 0x18, "TxUnicastPkts" }, 48 { 4, 0x1c, "TxCollisions" }, 49 { 4, 0x20, "TxSingleCollision" }, 50 { 4, 0x24, "TxMultipleCollision" }, 51 { 4, 0x28, "TxDeferredTransmit" }, 52 { 4, 0x2c, "TxLateCollision" }, 53 { 4, 0x30, "TxExcessiveCollision" }, 54 { 4, 0x38, "TxPausePkts" }, 55 { 8, 0x44, "RxOctets" }, 56 { 4, 0x4c, "RxUndersizePkts" }, 57 { 4, 0x50, "RxPausePkts" }, 58 { 4, 0x54, "Pkts64Octets" }, 59 { 4, 0x58, "Pkts65to127Octets" }, 60 { 4, 0x5c, "Pkts128to255Octets" }, 61 { 4, 0x60, "Pkts256to511Octets" }, 62 { 4, 0x64, "Pkts512to1023Octets" }, 63 { 4, 0x68, "Pkts1024to1522Octets" }, 64 { 4, 0x6c, "RxOversizePkts" }, 65 { 4, 0x70, "RxJabbers" }, 66 { 4, 0x74, "RxAlignmentErrors" }, 67 { 4, 0x78, "RxFCSErrors" }, 68 { 8, 0x7c, "RxGoodOctets" }, 69 { 4, 0x84, "RxDropPkts" }, 70 { 4, 0x88, "RxUnicastPkts" }, 71 { 4, 0x8c, "RxMulticastPkts" }, 72 { 4, 0x90, "RxBroadcastPkts" }, 73 { 4, 0x94, "RxSAChanges" }, 74 { 4, 0x98, "RxFragments" }, 75 }; 76 77 #define B53_MIBS_65_SIZE ARRAY_SIZE(b53_mibs_65) 78 79 /* BCM63xx MIB counters */ 80 static const struct b53_mib_desc b53_mibs_63xx[] = { 81 { 8, 0x00, "TxOctets" }, 82 { 4, 0x08, "TxDropPkts" }, 83 { 4, 0x0c, "TxQoSPkts" }, 84 { 4, 0x10, "TxBroadcastPkts" }, 85 { 4, 0x14, "TxMulticastPkts" }, 86 { 4, 0x18, "TxUnicastPkts" }, 87 { 4, 0x1c, "TxCollisions" }, 88 { 4, 0x20, "TxSingleCollision" }, 89 { 4, 0x24, "TxMultipleCollision" }, 90 { 4, 0x28, "TxDeferredTransmit" }, 91 { 4, 0x2c, "TxLateCollision" }, 92 { 4, 0x30, "TxExcessiveCollision" }, 93 { 4, 0x38, "TxPausePkts" }, 94 { 8, 0x3c, "TxQoSOctets" }, 95 { 8, 0x44, "RxOctets" }, 96 { 4, 0x4c, "RxUndersizePkts" }, 97 { 4, 0x50, "RxPausePkts" }, 98 { 4, 0x54, "Pkts64Octets" }, 99 { 4, 0x58, "Pkts65to127Octets" }, 100 { 4, 0x5c, "Pkts128to255Octets" }, 101 { 4, 0x60, "Pkts256to511Octets" }, 102 { 4, 0x64, "Pkts512to1023Octets" }, 103 { 4, 0x68, "Pkts1024to1522Octets" }, 104 { 4, 0x6c, "RxOversizePkts" }, 105 { 4, 0x70, "RxJabbers" }, 106 { 4, 0x74, "RxAlignmentErrors" }, 107 { 4, 0x78, "RxFCSErrors" }, 108 { 8, 0x7c, "RxGoodOctets" }, 109 { 4, 0x84, "RxDropPkts" }, 110 { 4, 0x88, "RxUnicastPkts" }, 111 { 4, 0x8c, "RxMulticastPkts" }, 112 { 4, 0x90, "RxBroadcastPkts" }, 113 { 4, 0x94, "RxSAChanges" }, 114 { 4, 0x98, "RxFragments" }, 115 { 4, 0xa0, "RxSymbolErrors" }, 116 { 4, 0xa4, "RxQoSPkts" }, 117 { 8, 0xa8, "RxQoSOctets" }, 118 { 4, 0xb0, "Pkts1523to2047Octets" }, 119 { 4, 0xb4, "Pkts2048to4095Octets" }, 120 { 4, 0xb8, "Pkts4096to8191Octets" }, 121 { 4, 0xbc, "Pkts8192to9728Octets" }, 122 { 4, 0xc0, "RxDiscarded" }, 123 }; 124 125 #define B53_MIBS_63XX_SIZE ARRAY_SIZE(b53_mibs_63xx) 126 127 /* MIB counters */ 128 static const struct b53_mib_desc b53_mibs[] = { 129 { 8, 0x00, "TxOctets" }, 130 { 4, 0x08, "TxDropPkts" }, 131 { 4, 0x10, "TxBroadcastPkts" }, 132 { 4, 0x14, "TxMulticastPkts" }, 133 { 4, 0x18, "TxUnicastPkts" }, 134 { 4, 0x1c, "TxCollisions" }, 135 { 4, 0x20, "TxSingleCollision" }, 136 { 4, 0x24, "TxMultipleCollision" }, 137 { 4, 0x28, "TxDeferredTransmit" }, 138 { 4, 0x2c, "TxLateCollision" }, 139 { 4, 0x30, "TxExcessiveCollision" }, 140 { 4, 0x38, "TxPausePkts" }, 141 { 8, 0x50, "RxOctets" }, 142 { 4, 0x58, "RxUndersizePkts" }, 143 { 4, 0x5c, "RxPausePkts" }, 144 { 4, 0x60, "Pkts64Octets" }, 145 { 4, 0x64, "Pkts65to127Octets" }, 146 { 4, 0x68, "Pkts128to255Octets" }, 147 { 4, 0x6c, "Pkts256to511Octets" }, 148 { 4, 0x70, "Pkts512to1023Octets" }, 149 { 4, 0x74, "Pkts1024to1522Octets" }, 150 { 4, 0x78, "RxOversizePkts" }, 151 { 4, 0x7c, "RxJabbers" }, 152 { 4, 0x80, "RxAlignmentErrors" }, 153 { 4, 0x84, "RxFCSErrors" }, 154 { 8, 0x88, "RxGoodOctets" }, 155 { 4, 0x90, "RxDropPkts" }, 156 { 4, 0x94, "RxUnicastPkts" }, 157 { 4, 0x98, "RxMulticastPkts" }, 158 { 4, 0x9c, "RxBroadcastPkts" }, 159 { 4, 0xa0, "RxSAChanges" }, 160 { 4, 0xa4, "RxFragments" }, 161 { 4, 0xa8, "RxJumboPkts" }, 162 { 4, 0xac, "RxSymbolErrors" }, 163 { 4, 0xc0, "RxDiscarded" }, 164 }; 165 166 #define B53_MIBS_SIZE ARRAY_SIZE(b53_mibs) 167 168 static const struct b53_mib_desc b53_mibs_58xx[] = { 169 { 8, 0x00, "TxOctets" }, 170 { 4, 0x08, "TxDropPkts" }, 171 { 4, 0x0c, "TxQPKTQ0" }, 172 { 4, 0x10, "TxBroadcastPkts" }, 173 { 4, 0x14, "TxMulticastPkts" }, 174 { 4, 0x18, "TxUnicastPKts" }, 175 { 4, 0x1c, "TxCollisions" }, 176 { 4, 0x20, "TxSingleCollision" }, 177 { 4, 0x24, "TxMultipleCollision" }, 178 { 4, 0x28, "TxDeferredCollision" }, 179 { 4, 0x2c, "TxLateCollision" }, 180 { 4, 0x30, "TxExcessiveCollision" }, 181 { 4, 0x34, "TxFrameInDisc" }, 182 { 4, 0x38, "TxPausePkts" }, 183 { 4, 0x3c, "TxQPKTQ1" }, 184 { 4, 0x40, "TxQPKTQ2" }, 185 { 4, 0x44, "TxQPKTQ3" }, 186 { 4, 0x48, "TxQPKTQ4" }, 187 { 4, 0x4c, "TxQPKTQ5" }, 188 { 8, 0x50, "RxOctets" }, 189 { 4, 0x58, "RxUndersizePkts" }, 190 { 4, 0x5c, "RxPausePkts" }, 191 { 4, 0x60, "RxPkts64Octets" }, 192 { 4, 0x64, "RxPkts65to127Octets" }, 193 { 4, 0x68, "RxPkts128to255Octets" }, 194 { 4, 0x6c, "RxPkts256to511Octets" }, 195 { 4, 0x70, "RxPkts512to1023Octets" }, 196 { 4, 0x74, "RxPkts1024toMaxPktsOctets" }, 197 { 4, 0x78, "RxOversizePkts" }, 198 { 4, 0x7c, "RxJabbers" }, 199 { 4, 0x80, "RxAlignmentErrors" }, 200 { 4, 0x84, "RxFCSErrors" }, 201 { 8, 0x88, "RxGoodOctets" }, 202 { 4, 0x90, "RxDropPkts" }, 203 { 4, 0x94, "RxUnicastPkts" }, 204 { 4, 0x98, "RxMulticastPkts" }, 205 { 4, 0x9c, "RxBroadcastPkts" }, 206 { 4, 0xa0, "RxSAChanges" }, 207 { 4, 0xa4, "RxFragments" }, 208 { 4, 0xa8, "RxJumboPkt" }, 209 { 4, 0xac, "RxSymblErr" }, 210 { 4, 0xb0, "InRangeErrCount" }, 211 { 4, 0xb4, "OutRangeErrCount" }, 212 { 4, 0xb8, "EEELpiEvent" }, 213 { 4, 0xbc, "EEELpiDuration" }, 214 { 4, 0xc0, "RxDiscard" }, 215 { 4, 0xc8, "TxQPKTQ6" }, 216 { 4, 0xcc, "TxQPKTQ7" }, 217 { 4, 0xd0, "TxPkts64Octets" }, 218 { 4, 0xd4, "TxPkts65to127Octets" }, 219 { 4, 0xd8, "TxPkts128to255Octets" }, 220 { 4, 0xdc, "TxPkts256to511Ocets" }, 221 { 4, 0xe0, "TxPkts512to1023Ocets" }, 222 { 4, 0xe4, "TxPkts1024toMaxPktOcets" }, 223 }; 224 225 #define B53_MIBS_58XX_SIZE ARRAY_SIZE(b53_mibs_58xx) 226 227 static int b53_do_vlan_op(struct b53_device *dev, u8 op) 228 { 229 unsigned int i; 230 231 b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op); 232 233 for (i = 0; i < 10; i++) { 234 u8 vta; 235 236 b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta); 237 if (!(vta & VTA_START_CMD)) 238 return 0; 239 240 usleep_range(100, 200); 241 } 242 243 return -EIO; 244 } 245 246 static void b53_set_vlan_entry(struct b53_device *dev, u16 vid, 247 struct b53_vlan *vlan) 248 { 249 if (is5325(dev)) { 250 u32 entry = 0; 251 252 if (vlan->members) { 253 entry = ((vlan->untag & VA_UNTAG_MASK_25) << 254 VA_UNTAG_S_25) | vlan->members; 255 if (dev->core_rev >= 3) 256 entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S; 257 else 258 entry |= VA_VALID_25; 259 } 260 261 b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry); 262 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid | 263 VTA_RW_STATE_WR | VTA_RW_OP_EN); 264 } else if (is5365(dev)) { 265 u16 entry = 0; 266 267 if (vlan->members) 268 entry = ((vlan->untag & VA_UNTAG_MASK_65) << 269 VA_UNTAG_S_65) | vlan->members | VA_VALID_65; 270 271 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry); 272 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid | 273 VTA_RW_STATE_WR | VTA_RW_OP_EN); 274 } else { 275 b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid); 276 b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], 277 (vlan->untag << VTE_UNTAG_S) | vlan->members); 278 279 b53_do_vlan_op(dev, VTA_CMD_WRITE); 280 } 281 282 dev_dbg(dev->ds->dev, "VID: %d, members: 0x%04x, untag: 0x%04x\n", 283 vid, vlan->members, vlan->untag); 284 } 285 286 static void b53_get_vlan_entry(struct b53_device *dev, u16 vid, 287 struct b53_vlan *vlan) 288 { 289 if (is5325(dev)) { 290 u32 entry = 0; 291 292 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid | 293 VTA_RW_STATE_RD | VTA_RW_OP_EN); 294 b53_read32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, &entry); 295 296 if (dev->core_rev >= 3) 297 vlan->valid = !!(entry & VA_VALID_25_R4); 298 else 299 vlan->valid = !!(entry & VA_VALID_25); 300 vlan->members = entry & VA_MEMBER_MASK; 301 vlan->untag = (entry >> VA_UNTAG_S_25) & VA_UNTAG_MASK_25; 302 303 } else if (is5365(dev)) { 304 u16 entry = 0; 305 306 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid | 307 VTA_RW_STATE_WR | VTA_RW_OP_EN); 308 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, &entry); 309 310 vlan->valid = !!(entry & VA_VALID_65); 311 vlan->members = entry & VA_MEMBER_MASK; 312 vlan->untag = (entry >> VA_UNTAG_S_65) & VA_UNTAG_MASK_65; 313 } else { 314 u32 entry = 0; 315 316 b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid); 317 b53_do_vlan_op(dev, VTA_CMD_READ); 318 b53_read32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], &entry); 319 vlan->members = entry & VTE_MEMBERS; 320 vlan->untag = (entry >> VTE_UNTAG_S) & VTE_MEMBERS; 321 vlan->valid = true; 322 } 323 } 324 325 static void b53_set_forwarding(struct b53_device *dev, int enable) 326 { 327 u8 mgmt; 328 329 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); 330 331 if (enable) 332 mgmt |= SM_SW_FWD_EN; 333 else 334 mgmt &= ~SM_SW_FWD_EN; 335 336 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); 337 338 /* Include IMP port in dumb forwarding mode 339 */ 340 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt); 341 mgmt |= B53_MII_DUMB_FWDG_EN; 342 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt); 343 344 /* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether 345 * frames should be flooded or not. 346 */ 347 b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt); 348 mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN; 349 b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt); 350 } 351 352 static void b53_enable_vlan(struct b53_device *dev, int port, bool enable, 353 bool enable_filtering) 354 { 355 u8 mgmt, vc0, vc1, vc4 = 0, vc5; 356 357 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); 358 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0); 359 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1); 360 361 if (is5325(dev) || is5365(dev)) { 362 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4); 363 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5); 364 } else if (is63xx(dev)) { 365 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4); 366 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5); 367 } else { 368 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4); 369 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5); 370 } 371 372 if (enable) { 373 vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID; 374 vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN; 375 vc4 &= ~VC4_ING_VID_CHECK_MASK; 376 if (enable_filtering) { 377 vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S; 378 vc5 |= VC5_DROP_VTABLE_MISS; 379 } else { 380 vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S; 381 vc5 &= ~VC5_DROP_VTABLE_MISS; 382 } 383 384 if (is5325(dev)) 385 vc0 &= ~VC0_RESERVED_1; 386 387 if (is5325(dev) || is5365(dev)) 388 vc1 |= VC1_RX_MCST_TAG_EN; 389 390 } else { 391 vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID); 392 vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN); 393 vc4 &= ~VC4_ING_VID_CHECK_MASK; 394 vc5 &= ~VC5_DROP_VTABLE_MISS; 395 396 if (is5325(dev) || is5365(dev)) 397 vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S; 398 else 399 vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S; 400 401 if (is5325(dev) || is5365(dev)) 402 vc1 &= ~VC1_RX_MCST_TAG_EN; 403 } 404 405 if (!is5325(dev) && !is5365(dev)) 406 vc5 &= ~VC5_VID_FFF_EN; 407 408 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0); 409 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1); 410 411 if (is5325(dev) || is5365(dev)) { 412 /* enable the high 8 bit vid check on 5325 */ 413 if (is5325(dev) && enable) 414 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 415 VC3_HIGH_8BIT_EN); 416 else 417 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0); 418 419 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4); 420 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5); 421 } else if (is63xx(dev)) { 422 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0); 423 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4); 424 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5); 425 } else { 426 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0); 427 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4); 428 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5); 429 } 430 431 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); 432 433 dev->vlan_enabled = enable; 434 435 dev_dbg(dev->dev, "Port %d VLAN enabled: %d, filtering: %d\n", 436 port, enable, enable_filtering); 437 } 438 439 static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100) 440 { 441 u32 port_mask = 0; 442 u16 max_size = JMS_MIN_SIZE; 443 444 if (is5325(dev) || is5365(dev)) 445 return -EINVAL; 446 447 if (enable) { 448 port_mask = dev->enabled_ports; 449 max_size = JMS_MAX_SIZE; 450 if (allow_10_100) 451 port_mask |= JPM_10_100_JUMBO_EN; 452 } 453 454 b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask); 455 return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size); 456 } 457 458 static int b53_flush_arl(struct b53_device *dev, u8 mask) 459 { 460 unsigned int i; 461 462 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, 463 FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask); 464 465 for (i = 0; i < 10; i++) { 466 u8 fast_age_ctrl; 467 468 b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, 469 &fast_age_ctrl); 470 471 if (!(fast_age_ctrl & FAST_AGE_DONE)) 472 goto out; 473 474 msleep(1); 475 } 476 477 return -ETIMEDOUT; 478 out: 479 /* Only age dynamic entries (default behavior) */ 480 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC); 481 return 0; 482 } 483 484 static int b53_fast_age_port(struct b53_device *dev, int port) 485 { 486 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port); 487 488 return b53_flush_arl(dev, FAST_AGE_PORT); 489 } 490 491 static int b53_fast_age_vlan(struct b53_device *dev, u16 vid) 492 { 493 b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid); 494 495 return b53_flush_arl(dev, FAST_AGE_VLAN); 496 } 497 498 void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port) 499 { 500 struct b53_device *dev = ds->priv; 501 unsigned int i; 502 u16 pvlan; 503 504 /* Enable the IMP port to be in the same VLAN as the other ports 505 * on a per-port basis such that we only have Port i and IMP in 506 * the same VLAN. 507 */ 508 b53_for_each_port(dev, i) { 509 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &pvlan); 510 pvlan |= BIT(cpu_port); 511 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan); 512 } 513 } 514 EXPORT_SYMBOL(b53_imp_vlan_setup); 515 516 static void b53_port_set_ucast_flood(struct b53_device *dev, int port, 517 bool unicast) 518 { 519 u16 uc; 520 521 b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc); 522 if (unicast) 523 uc |= BIT(port); 524 else 525 uc &= ~BIT(port); 526 b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc); 527 } 528 529 static void b53_port_set_mcast_flood(struct b53_device *dev, int port, 530 bool multicast) 531 { 532 u16 mc; 533 534 b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc); 535 if (multicast) 536 mc |= BIT(port); 537 else 538 mc &= ~BIT(port); 539 b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc); 540 541 b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc); 542 if (multicast) 543 mc |= BIT(port); 544 else 545 mc &= ~BIT(port); 546 b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc); 547 } 548 549 static void b53_port_set_learning(struct b53_device *dev, int port, 550 bool learning) 551 { 552 u16 reg; 553 554 b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, ®); 555 if (learning) 556 reg &= ~BIT(port); 557 else 558 reg |= BIT(port); 559 b53_write16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, reg); 560 } 561 562 static void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable) 563 { 564 struct b53_device *dev = ds->priv; 565 u16 reg; 566 567 b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, ®); 568 if (enable) 569 reg |= BIT(port); 570 else 571 reg &= ~BIT(port); 572 b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg); 573 } 574 575 int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy) 576 { 577 struct b53_device *dev = ds->priv; 578 unsigned int cpu_port; 579 int ret = 0; 580 u16 pvlan; 581 582 if (!dsa_is_user_port(ds, port)) 583 return 0; 584 585 cpu_port = dsa_to_port(ds, port)->cpu_dp->index; 586 587 b53_port_set_ucast_flood(dev, port, true); 588 b53_port_set_mcast_flood(dev, port, true); 589 b53_port_set_learning(dev, port, false); 590 591 if (dev->ops->irq_enable) 592 ret = dev->ops->irq_enable(dev, port); 593 if (ret) 594 return ret; 595 596 /* Clear the Rx and Tx disable bits and set to no spanning tree */ 597 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0); 598 599 /* Set this port, and only this one to be in the default VLAN, 600 * if member of a bridge, restore its membership prior to 601 * bringing down this port. 602 */ 603 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan); 604 pvlan &= ~0x1ff; 605 pvlan |= BIT(port); 606 pvlan |= dev->ports[port].vlan_ctl_mask; 607 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan); 608 609 b53_imp_vlan_setup(ds, cpu_port); 610 611 /* If EEE was enabled, restore it */ 612 if (dev->ports[port].eee.eee_enabled) 613 b53_eee_enable_set(ds, port, true); 614 615 return 0; 616 } 617 EXPORT_SYMBOL(b53_enable_port); 618 619 void b53_disable_port(struct dsa_switch *ds, int port) 620 { 621 struct b53_device *dev = ds->priv; 622 u8 reg; 623 624 /* Disable Tx/Rx for the port */ 625 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®); 626 reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE; 627 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg); 628 629 if (dev->ops->irq_disable) 630 dev->ops->irq_disable(dev, port); 631 } 632 EXPORT_SYMBOL(b53_disable_port); 633 634 void b53_brcm_hdr_setup(struct dsa_switch *ds, int port) 635 { 636 struct b53_device *dev = ds->priv; 637 bool tag_en = !(dev->tag_protocol == DSA_TAG_PROTO_NONE); 638 u8 hdr_ctl, val; 639 u16 reg; 640 641 /* Resolve which bit controls the Broadcom tag */ 642 switch (port) { 643 case 8: 644 val = BRCM_HDR_P8_EN; 645 break; 646 case 7: 647 val = BRCM_HDR_P7_EN; 648 break; 649 case 5: 650 val = BRCM_HDR_P5_EN; 651 break; 652 default: 653 val = 0; 654 break; 655 } 656 657 /* Enable management mode if tagging is requested */ 658 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &hdr_ctl); 659 if (tag_en) 660 hdr_ctl |= SM_SW_FWD_MODE; 661 else 662 hdr_ctl &= ~SM_SW_FWD_MODE; 663 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, hdr_ctl); 664 665 /* Configure the appropriate IMP port */ 666 b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &hdr_ctl); 667 if (port == 8) 668 hdr_ctl |= GC_FRM_MGMT_PORT_MII; 669 else if (port == 5) 670 hdr_ctl |= GC_FRM_MGMT_PORT_M; 671 b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, hdr_ctl); 672 673 /* Enable Broadcom tags for IMP port */ 674 b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl); 675 if (tag_en) 676 hdr_ctl |= val; 677 else 678 hdr_ctl &= ~val; 679 b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl); 680 681 /* Registers below are only accessible on newer devices */ 682 if (!is58xx(dev)) 683 return; 684 685 /* Enable reception Broadcom tag for CPU TX (switch RX) to 686 * allow us to tag outgoing frames 687 */ 688 b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, ®); 689 if (tag_en) 690 reg &= ~BIT(port); 691 else 692 reg |= BIT(port); 693 b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg); 694 695 /* Enable transmission of Broadcom tags from the switch (CPU RX) to 696 * allow delivering frames to the per-port net_devices 697 */ 698 b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, ®); 699 if (tag_en) 700 reg &= ~BIT(port); 701 else 702 reg |= BIT(port); 703 b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg); 704 } 705 EXPORT_SYMBOL(b53_brcm_hdr_setup); 706 707 static void b53_enable_cpu_port(struct b53_device *dev, int port) 708 { 709 u8 port_ctrl; 710 711 /* BCM5325 CPU port is at 8 */ 712 if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25) 713 port = B53_CPU_PORT; 714 715 port_ctrl = PORT_CTRL_RX_BCST_EN | 716 PORT_CTRL_RX_MCST_EN | 717 PORT_CTRL_RX_UCST_EN; 718 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl); 719 720 b53_brcm_hdr_setup(dev->ds, port); 721 722 b53_port_set_ucast_flood(dev, port, true); 723 b53_port_set_mcast_flood(dev, port, true); 724 b53_port_set_learning(dev, port, false); 725 } 726 727 static void b53_enable_mib(struct b53_device *dev) 728 { 729 u8 gc; 730 731 b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc); 732 gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN); 733 b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc); 734 } 735 736 static u16 b53_default_pvid(struct b53_device *dev) 737 { 738 if (is5325(dev) || is5365(dev)) 739 return 1; 740 else 741 return 0; 742 } 743 744 static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port) 745 { 746 struct b53_device *dev = ds->priv; 747 748 return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port); 749 } 750 751 int b53_configure_vlan(struct dsa_switch *ds) 752 { 753 struct b53_device *dev = ds->priv; 754 struct b53_vlan vl = { 0 }; 755 struct b53_vlan *v; 756 int i, def_vid; 757 u16 vid; 758 759 def_vid = b53_default_pvid(dev); 760 761 /* clear all vlan entries */ 762 if (is5325(dev) || is5365(dev)) { 763 for (i = def_vid; i < dev->num_vlans; i++) 764 b53_set_vlan_entry(dev, i, &vl); 765 } else { 766 b53_do_vlan_op(dev, VTA_CMD_CLEAR); 767 } 768 769 b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering); 770 771 /* Create an untagged VLAN entry for the default PVID in case 772 * CONFIG_VLAN_8021Q is disabled and there are no calls to 773 * dsa_user_vlan_rx_add_vid() to create the default VLAN 774 * entry. Do this only when the tagging protocol is not 775 * DSA_TAG_PROTO_NONE 776 */ 777 b53_for_each_port(dev, i) { 778 v = &dev->vlans[def_vid]; 779 v->members |= BIT(i); 780 if (!b53_vlan_port_needs_forced_tagged(ds, i)) 781 v->untag = v->members; 782 b53_write16(dev, B53_VLAN_PAGE, 783 B53_VLAN_PORT_DEF_TAG(i), def_vid); 784 } 785 786 /* Upon initial call we have not set-up any VLANs, but upon 787 * system resume, we need to restore all VLAN entries. 788 */ 789 for (vid = def_vid; vid < dev->num_vlans; vid++) { 790 v = &dev->vlans[vid]; 791 792 if (!v->members) 793 continue; 794 795 b53_set_vlan_entry(dev, vid, v); 796 b53_fast_age_vlan(dev, vid); 797 } 798 799 return 0; 800 } 801 EXPORT_SYMBOL(b53_configure_vlan); 802 803 static void b53_switch_reset_gpio(struct b53_device *dev) 804 { 805 int gpio = dev->reset_gpio; 806 807 if (gpio < 0) 808 return; 809 810 /* Reset sequence: RESET low(50ms)->high(20ms) 811 */ 812 gpio_set_value(gpio, 0); 813 mdelay(50); 814 815 gpio_set_value(gpio, 1); 816 mdelay(20); 817 818 dev->current_page = 0xff; 819 } 820 821 static int b53_switch_reset(struct b53_device *dev) 822 { 823 unsigned int timeout = 1000; 824 u8 mgmt, reg; 825 826 b53_switch_reset_gpio(dev); 827 828 if (is539x(dev)) { 829 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83); 830 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00); 831 } 832 833 /* This is specific to 58xx devices here, do not use is58xx() which 834 * covers the larger Starfigther 2 family, including 7445/7278 which 835 * still use this driver as a library and need to perform the reset 836 * earlier. 837 */ 838 if (dev->chip_id == BCM58XX_DEVICE_ID || 839 dev->chip_id == BCM583XX_DEVICE_ID) { 840 b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®); 841 reg |= SW_RST | EN_SW_RST | EN_CH_RST; 842 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg); 843 844 do { 845 b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®); 846 if (!(reg & SW_RST)) 847 break; 848 849 usleep_range(1000, 2000); 850 } while (timeout-- > 0); 851 852 if (timeout == 0) { 853 dev_err(dev->dev, 854 "Timeout waiting for SW_RST to clear!\n"); 855 return -ETIMEDOUT; 856 } 857 } 858 859 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); 860 861 if (!(mgmt & SM_SW_FWD_EN)) { 862 mgmt &= ~SM_SW_FWD_MODE; 863 mgmt |= SM_SW_FWD_EN; 864 865 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); 866 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); 867 868 if (!(mgmt & SM_SW_FWD_EN)) { 869 dev_err(dev->dev, "Failed to enable switch!\n"); 870 return -EINVAL; 871 } 872 } 873 874 b53_enable_mib(dev); 875 876 return b53_flush_arl(dev, FAST_AGE_STATIC); 877 } 878 879 static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg) 880 { 881 struct b53_device *priv = ds->priv; 882 u16 value = 0; 883 int ret; 884 885 if (priv->ops->phy_read16) 886 ret = priv->ops->phy_read16(priv, addr, reg, &value); 887 else 888 ret = b53_read16(priv, B53_PORT_MII_PAGE(addr), 889 reg * 2, &value); 890 891 return ret ? ret : value; 892 } 893 894 static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val) 895 { 896 struct b53_device *priv = ds->priv; 897 898 if (priv->ops->phy_write16) 899 return priv->ops->phy_write16(priv, addr, reg, val); 900 901 return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val); 902 } 903 904 static int b53_reset_switch(struct b53_device *priv) 905 { 906 /* reset vlans */ 907 memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans); 908 memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports); 909 910 priv->serdes_lane = B53_INVALID_LANE; 911 912 return b53_switch_reset(priv); 913 } 914 915 static int b53_apply_config(struct b53_device *priv) 916 { 917 /* disable switching */ 918 b53_set_forwarding(priv, 0); 919 920 b53_configure_vlan(priv->ds); 921 922 /* enable switching */ 923 b53_set_forwarding(priv, 1); 924 925 return 0; 926 } 927 928 static void b53_reset_mib(struct b53_device *priv) 929 { 930 u8 gc; 931 932 b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc); 933 934 b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB); 935 msleep(1); 936 b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB); 937 msleep(1); 938 } 939 940 static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev) 941 { 942 if (is5365(dev)) 943 return b53_mibs_65; 944 else if (is63xx(dev)) 945 return b53_mibs_63xx; 946 else if (is58xx(dev)) 947 return b53_mibs_58xx; 948 else 949 return b53_mibs; 950 } 951 952 static unsigned int b53_get_mib_size(struct b53_device *dev) 953 { 954 if (is5365(dev)) 955 return B53_MIBS_65_SIZE; 956 else if (is63xx(dev)) 957 return B53_MIBS_63XX_SIZE; 958 else if (is58xx(dev)) 959 return B53_MIBS_58XX_SIZE; 960 else 961 return B53_MIBS_SIZE; 962 } 963 964 static struct phy_device *b53_get_phy_device(struct dsa_switch *ds, int port) 965 { 966 /* These ports typically do not have built-in PHYs */ 967 switch (port) { 968 case B53_CPU_PORT_25: 969 case 7: 970 case B53_CPU_PORT: 971 return NULL; 972 } 973 974 return mdiobus_get_phy(ds->user_mii_bus, port); 975 } 976 977 void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset, 978 uint8_t *data) 979 { 980 struct b53_device *dev = ds->priv; 981 const struct b53_mib_desc *mibs = b53_get_mib(dev); 982 unsigned int mib_size = b53_get_mib_size(dev); 983 struct phy_device *phydev; 984 unsigned int i; 985 986 if (stringset == ETH_SS_STATS) { 987 for (i = 0; i < mib_size; i++) 988 strscpy(data + i * ETH_GSTRING_LEN, 989 mibs[i].name, ETH_GSTRING_LEN); 990 } else if (stringset == ETH_SS_PHY_STATS) { 991 phydev = b53_get_phy_device(ds, port); 992 if (!phydev) 993 return; 994 995 phy_ethtool_get_strings(phydev, data); 996 } 997 } 998 EXPORT_SYMBOL(b53_get_strings); 999 1000 void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) 1001 { 1002 struct b53_device *dev = ds->priv; 1003 const struct b53_mib_desc *mibs = b53_get_mib(dev); 1004 unsigned int mib_size = b53_get_mib_size(dev); 1005 const struct b53_mib_desc *s; 1006 unsigned int i; 1007 u64 val = 0; 1008 1009 if (is5365(dev) && port == 5) 1010 port = 8; 1011 1012 mutex_lock(&dev->stats_mutex); 1013 1014 for (i = 0; i < mib_size; i++) { 1015 s = &mibs[i]; 1016 1017 if (s->size == 8) { 1018 b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val); 1019 } else { 1020 u32 val32; 1021 1022 b53_read32(dev, B53_MIB_PAGE(port), s->offset, 1023 &val32); 1024 val = val32; 1025 } 1026 data[i] = (u64)val; 1027 } 1028 1029 mutex_unlock(&dev->stats_mutex); 1030 } 1031 EXPORT_SYMBOL(b53_get_ethtool_stats); 1032 1033 void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data) 1034 { 1035 struct phy_device *phydev; 1036 1037 phydev = b53_get_phy_device(ds, port); 1038 if (!phydev) 1039 return; 1040 1041 phy_ethtool_get_stats(phydev, NULL, data); 1042 } 1043 EXPORT_SYMBOL(b53_get_ethtool_phy_stats); 1044 1045 int b53_get_sset_count(struct dsa_switch *ds, int port, int sset) 1046 { 1047 struct b53_device *dev = ds->priv; 1048 struct phy_device *phydev; 1049 1050 if (sset == ETH_SS_STATS) { 1051 return b53_get_mib_size(dev); 1052 } else if (sset == ETH_SS_PHY_STATS) { 1053 phydev = b53_get_phy_device(ds, port); 1054 if (!phydev) 1055 return 0; 1056 1057 return phy_ethtool_get_sset_count(phydev); 1058 } 1059 1060 return 0; 1061 } 1062 EXPORT_SYMBOL(b53_get_sset_count); 1063 1064 enum b53_devlink_resource_id { 1065 B53_DEVLINK_PARAM_ID_VLAN_TABLE, 1066 }; 1067 1068 static u64 b53_devlink_vlan_table_get(void *priv) 1069 { 1070 struct b53_device *dev = priv; 1071 struct b53_vlan *vl; 1072 unsigned int i; 1073 u64 count = 0; 1074 1075 for (i = 0; i < dev->num_vlans; i++) { 1076 vl = &dev->vlans[i]; 1077 if (vl->members) 1078 count++; 1079 } 1080 1081 return count; 1082 } 1083 1084 int b53_setup_devlink_resources(struct dsa_switch *ds) 1085 { 1086 struct devlink_resource_size_params size_params; 1087 struct b53_device *dev = ds->priv; 1088 int err; 1089 1090 devlink_resource_size_params_init(&size_params, dev->num_vlans, 1091 dev->num_vlans, 1092 1, DEVLINK_RESOURCE_UNIT_ENTRY); 1093 1094 err = dsa_devlink_resource_register(ds, "VLAN", dev->num_vlans, 1095 B53_DEVLINK_PARAM_ID_VLAN_TABLE, 1096 DEVLINK_RESOURCE_ID_PARENT_TOP, 1097 &size_params); 1098 if (err) 1099 goto out; 1100 1101 dsa_devlink_resource_occ_get_register(ds, 1102 B53_DEVLINK_PARAM_ID_VLAN_TABLE, 1103 b53_devlink_vlan_table_get, dev); 1104 1105 return 0; 1106 out: 1107 dsa_devlink_resources_unregister(ds); 1108 return err; 1109 } 1110 EXPORT_SYMBOL(b53_setup_devlink_resources); 1111 1112 static int b53_setup(struct dsa_switch *ds) 1113 { 1114 struct b53_device *dev = ds->priv; 1115 unsigned int port; 1116 int ret; 1117 1118 /* Request bridge PVID untagged when DSA_TAG_PROTO_NONE is set 1119 * which forces the CPU port to be tagged in all VLANs. 1120 */ 1121 ds->untag_bridge_pvid = dev->tag_protocol == DSA_TAG_PROTO_NONE; 1122 1123 ret = b53_reset_switch(dev); 1124 if (ret) { 1125 dev_err(ds->dev, "failed to reset switch\n"); 1126 return ret; 1127 } 1128 1129 b53_reset_mib(dev); 1130 1131 ret = b53_apply_config(dev); 1132 if (ret) { 1133 dev_err(ds->dev, "failed to apply configuration\n"); 1134 return ret; 1135 } 1136 1137 /* Configure IMP/CPU port, disable all other ports. Enabled 1138 * ports will be configured with .port_enable 1139 */ 1140 for (port = 0; port < dev->num_ports; port++) { 1141 if (dsa_is_cpu_port(ds, port)) 1142 b53_enable_cpu_port(dev, port); 1143 else 1144 b53_disable_port(ds, port); 1145 } 1146 1147 return b53_setup_devlink_resources(ds); 1148 } 1149 1150 static void b53_teardown(struct dsa_switch *ds) 1151 { 1152 dsa_devlink_resources_unregister(ds); 1153 } 1154 1155 static void b53_force_link(struct b53_device *dev, int port, int link) 1156 { 1157 u8 reg, val, off; 1158 1159 /* Override the port settings */ 1160 if (port == dev->imp_port) { 1161 off = B53_PORT_OVERRIDE_CTRL; 1162 val = PORT_OVERRIDE_EN; 1163 } else { 1164 off = B53_GMII_PORT_OVERRIDE_CTRL(port); 1165 val = GMII_PO_EN; 1166 } 1167 1168 b53_read8(dev, B53_CTRL_PAGE, off, ®); 1169 reg |= val; 1170 if (link) 1171 reg |= PORT_OVERRIDE_LINK; 1172 else 1173 reg &= ~PORT_OVERRIDE_LINK; 1174 b53_write8(dev, B53_CTRL_PAGE, off, reg); 1175 } 1176 1177 static void b53_force_port_config(struct b53_device *dev, int port, 1178 int speed, int duplex, 1179 bool tx_pause, bool rx_pause) 1180 { 1181 u8 reg, val, off; 1182 1183 /* Override the port settings */ 1184 if (port == dev->imp_port) { 1185 off = B53_PORT_OVERRIDE_CTRL; 1186 val = PORT_OVERRIDE_EN; 1187 } else { 1188 off = B53_GMII_PORT_OVERRIDE_CTRL(port); 1189 val = GMII_PO_EN; 1190 } 1191 1192 b53_read8(dev, B53_CTRL_PAGE, off, ®); 1193 reg |= val; 1194 if (duplex == DUPLEX_FULL) 1195 reg |= PORT_OVERRIDE_FULL_DUPLEX; 1196 else 1197 reg &= ~PORT_OVERRIDE_FULL_DUPLEX; 1198 1199 switch (speed) { 1200 case 2000: 1201 reg |= PORT_OVERRIDE_SPEED_2000M; 1202 fallthrough; 1203 case SPEED_1000: 1204 reg |= PORT_OVERRIDE_SPEED_1000M; 1205 break; 1206 case SPEED_100: 1207 reg |= PORT_OVERRIDE_SPEED_100M; 1208 break; 1209 case SPEED_10: 1210 reg |= PORT_OVERRIDE_SPEED_10M; 1211 break; 1212 default: 1213 dev_err(dev->dev, "unknown speed: %d\n", speed); 1214 return; 1215 } 1216 1217 if (rx_pause) 1218 reg |= PORT_OVERRIDE_RX_FLOW; 1219 if (tx_pause) 1220 reg |= PORT_OVERRIDE_TX_FLOW; 1221 1222 b53_write8(dev, B53_CTRL_PAGE, off, reg); 1223 } 1224 1225 static void b53_adjust_63xx_rgmii(struct dsa_switch *ds, int port, 1226 phy_interface_t interface) 1227 { 1228 struct b53_device *dev = ds->priv; 1229 u8 rgmii_ctrl = 0, off; 1230 1231 if (port == dev->imp_port) 1232 off = B53_RGMII_CTRL_IMP; 1233 else 1234 off = B53_RGMII_CTRL_P(port); 1235 1236 b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl); 1237 1238 switch (interface) { 1239 case PHY_INTERFACE_MODE_RGMII_ID: 1240 rgmii_ctrl |= (RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC); 1241 break; 1242 case PHY_INTERFACE_MODE_RGMII_RXID: 1243 rgmii_ctrl &= ~(RGMII_CTRL_DLL_TXC); 1244 rgmii_ctrl |= RGMII_CTRL_DLL_RXC; 1245 break; 1246 case PHY_INTERFACE_MODE_RGMII_TXID: 1247 rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC); 1248 rgmii_ctrl |= RGMII_CTRL_DLL_TXC; 1249 break; 1250 case PHY_INTERFACE_MODE_RGMII: 1251 default: 1252 rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC); 1253 break; 1254 } 1255 1256 if (port != dev->imp_port) { 1257 if (is63268(dev)) 1258 rgmii_ctrl |= RGMII_CTRL_MII_OVERRIDE; 1259 1260 rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII; 1261 } 1262 1263 b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl); 1264 1265 dev_dbg(ds->dev, "Configured port %d for %s\n", port, 1266 phy_modes(interface)); 1267 } 1268 1269 static void b53_adjust_link(struct dsa_switch *ds, int port, 1270 struct phy_device *phydev) 1271 { 1272 struct b53_device *dev = ds->priv; 1273 struct ethtool_keee *p = &dev->ports[port].eee; 1274 u8 rgmii_ctrl = 0, reg = 0, off; 1275 bool tx_pause = false; 1276 bool rx_pause = false; 1277 1278 if (!phy_is_pseudo_fixed_link(phydev)) 1279 return; 1280 1281 /* Enable flow control on BCM5301x's CPU port */ 1282 if (is5301x(dev) && dsa_is_cpu_port(ds, port)) 1283 tx_pause = rx_pause = true; 1284 1285 if (phydev->pause) { 1286 if (phydev->asym_pause) 1287 tx_pause = true; 1288 rx_pause = true; 1289 } 1290 1291 b53_force_port_config(dev, port, phydev->speed, phydev->duplex, 1292 tx_pause, rx_pause); 1293 b53_force_link(dev, port, phydev->link); 1294 1295 if (is63xx(dev) && port >= B53_63XX_RGMII0) 1296 b53_adjust_63xx_rgmii(ds, port, phydev->interface); 1297 1298 if (is531x5(dev) && phy_interface_is_rgmii(phydev)) { 1299 if (port == dev->imp_port) 1300 off = B53_RGMII_CTRL_IMP; 1301 else 1302 off = B53_RGMII_CTRL_P(port); 1303 1304 /* Configure the port RGMII clock delay by DLL disabled and 1305 * tx_clk aligned timing (restoring to reset defaults) 1306 */ 1307 b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl); 1308 rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC | 1309 RGMII_CTRL_TIMING_SEL); 1310 1311 /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make 1312 * sure that we enable the port TX clock internal delay to 1313 * account for this internal delay that is inserted, otherwise 1314 * the switch won't be able to receive correctly. 1315 * 1316 * PHY_INTERFACE_MODE_RGMII means that we are not introducing 1317 * any delay neither on transmission nor reception, so the 1318 * BCM53125 must also be configured accordingly to account for 1319 * the lack of delay and introduce 1320 * 1321 * The BCM53125 switch has its RX clock and TX clock control 1322 * swapped, hence the reason why we modify the TX clock path in 1323 * the "RGMII" case 1324 */ 1325 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) 1326 rgmii_ctrl |= RGMII_CTRL_DLL_TXC; 1327 if (phydev->interface == PHY_INTERFACE_MODE_RGMII) 1328 rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC; 1329 rgmii_ctrl |= RGMII_CTRL_TIMING_SEL; 1330 b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl); 1331 1332 dev_info(ds->dev, "Configured port %d for %s\n", port, 1333 phy_modes(phydev->interface)); 1334 } 1335 1336 /* configure MII port if necessary */ 1337 if (is5325(dev)) { 1338 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, 1339 ®); 1340 1341 /* reverse mii needs to be enabled */ 1342 if (!(reg & PORT_OVERRIDE_RV_MII_25)) { 1343 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, 1344 reg | PORT_OVERRIDE_RV_MII_25); 1345 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, 1346 ®); 1347 1348 if (!(reg & PORT_OVERRIDE_RV_MII_25)) { 1349 dev_err(ds->dev, 1350 "Failed to enable reverse MII mode\n"); 1351 return; 1352 } 1353 } 1354 } 1355 1356 /* Re-negotiate EEE if it was enabled already */ 1357 p->eee_enabled = b53_eee_init(ds, port, phydev); 1358 } 1359 1360 void b53_port_event(struct dsa_switch *ds, int port) 1361 { 1362 struct b53_device *dev = ds->priv; 1363 bool link; 1364 u16 sts; 1365 1366 b53_read16(dev, B53_STAT_PAGE, B53_LINK_STAT, &sts); 1367 link = !!(sts & BIT(port)); 1368 dsa_port_phylink_mac_change(ds, port, link); 1369 } 1370 EXPORT_SYMBOL(b53_port_event); 1371 1372 static void b53_phylink_get_caps(struct dsa_switch *ds, int port, 1373 struct phylink_config *config) 1374 { 1375 struct b53_device *dev = ds->priv; 1376 1377 /* Internal ports need GMII for PHYLIB */ 1378 __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces); 1379 1380 /* These switches appear to support MII and RevMII too, but beyond 1381 * this, the code gives very few clues. FIXME: We probably need more 1382 * interface modes here. 1383 * 1384 * According to b53_srab_mux_init(), ports 3..5 can support: 1385 * SGMII, MII, GMII, RGMII or INTERNAL depending on the MUX setting. 1386 * However, the interface mode read from the MUX configuration is 1387 * not passed back to DSA, so phylink uses NA. 1388 * DT can specify RGMII for ports 0, 1. 1389 * For MDIO, port 8 can be RGMII_TXID. 1390 */ 1391 __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces); 1392 __set_bit(PHY_INTERFACE_MODE_REVMII, config->supported_interfaces); 1393 1394 config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | 1395 MAC_10 | MAC_100; 1396 1397 /* 5325/5365 are not capable of gigabit speeds, everything else is. 1398 * Note: the original code also exclulded Gigagbit for MII, RevMII 1399 * and 802.3z modes. MII and RevMII are not able to work above 100M, 1400 * so will be excluded by the generic validator implementation. 1401 * However, the exclusion of Gigabit for 802.3z just seems wrong. 1402 */ 1403 if (!(is5325(dev) || is5365(dev))) 1404 config->mac_capabilities |= MAC_1000; 1405 1406 /* Get the implementation specific capabilities */ 1407 if (dev->ops->phylink_get_caps) 1408 dev->ops->phylink_get_caps(dev, port, config); 1409 } 1410 1411 static struct phylink_pcs *b53_phylink_mac_select_pcs(struct dsa_switch *ds, 1412 int port, 1413 phy_interface_t interface) 1414 { 1415 struct b53_device *dev = ds->priv; 1416 1417 if (!dev->ops->phylink_mac_select_pcs) 1418 return NULL; 1419 1420 return dev->ops->phylink_mac_select_pcs(dev, port, interface); 1421 } 1422 1423 void b53_phylink_mac_config(struct dsa_switch *ds, int port, 1424 unsigned int mode, 1425 const struct phylink_link_state *state) 1426 { 1427 } 1428 EXPORT_SYMBOL(b53_phylink_mac_config); 1429 1430 void b53_phylink_mac_link_down(struct dsa_switch *ds, int port, 1431 unsigned int mode, 1432 phy_interface_t interface) 1433 { 1434 struct b53_device *dev = ds->priv; 1435 1436 if (mode == MLO_AN_PHY) 1437 return; 1438 1439 if (mode == MLO_AN_FIXED) { 1440 b53_force_link(dev, port, false); 1441 return; 1442 } 1443 1444 if (phy_interface_mode_is_8023z(interface) && 1445 dev->ops->serdes_link_set) 1446 dev->ops->serdes_link_set(dev, port, mode, interface, false); 1447 } 1448 EXPORT_SYMBOL(b53_phylink_mac_link_down); 1449 1450 void b53_phylink_mac_link_up(struct dsa_switch *ds, int port, 1451 unsigned int mode, 1452 phy_interface_t interface, 1453 struct phy_device *phydev, 1454 int speed, int duplex, 1455 bool tx_pause, bool rx_pause) 1456 { 1457 struct b53_device *dev = ds->priv; 1458 1459 if (is63xx(dev) && port >= B53_63XX_RGMII0) 1460 b53_adjust_63xx_rgmii(ds, port, interface); 1461 1462 if (mode == MLO_AN_PHY) 1463 return; 1464 1465 if (mode == MLO_AN_FIXED) { 1466 b53_force_port_config(dev, port, speed, duplex, 1467 tx_pause, rx_pause); 1468 b53_force_link(dev, port, true); 1469 return; 1470 } 1471 1472 if (phy_interface_mode_is_8023z(interface) && 1473 dev->ops->serdes_link_set) 1474 dev->ops->serdes_link_set(dev, port, mode, interface, true); 1475 } 1476 EXPORT_SYMBOL(b53_phylink_mac_link_up); 1477 1478 int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, 1479 struct netlink_ext_ack *extack) 1480 { 1481 struct b53_device *dev = ds->priv; 1482 1483 b53_enable_vlan(dev, port, dev->vlan_enabled, vlan_filtering); 1484 1485 return 0; 1486 } 1487 EXPORT_SYMBOL(b53_vlan_filtering); 1488 1489 static int b53_vlan_prepare(struct dsa_switch *ds, int port, 1490 const struct switchdev_obj_port_vlan *vlan) 1491 { 1492 struct b53_device *dev = ds->priv; 1493 1494 if ((is5325(dev) || is5365(dev)) && vlan->vid == 0) 1495 return -EOPNOTSUPP; 1496 1497 /* Port 7 on 7278 connects to the ASP's UniMAC which is not capable of 1498 * receiving VLAN tagged frames at all, we can still allow the port to 1499 * be configured for egress untagged. 1500 */ 1501 if (dev->chip_id == BCM7278_DEVICE_ID && port == 7 && 1502 !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED)) 1503 return -EINVAL; 1504 1505 if (vlan->vid >= dev->num_vlans) 1506 return -ERANGE; 1507 1508 b53_enable_vlan(dev, port, true, ds->vlan_filtering); 1509 1510 return 0; 1511 } 1512 1513 int b53_vlan_add(struct dsa_switch *ds, int port, 1514 const struct switchdev_obj_port_vlan *vlan, 1515 struct netlink_ext_ack *extack) 1516 { 1517 struct b53_device *dev = ds->priv; 1518 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; 1519 bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; 1520 struct b53_vlan *vl; 1521 int err; 1522 1523 err = b53_vlan_prepare(ds, port, vlan); 1524 if (err) 1525 return err; 1526 1527 vl = &dev->vlans[vlan->vid]; 1528 1529 b53_get_vlan_entry(dev, vlan->vid, vl); 1530 1531 if (vlan->vid == 0 && vlan->vid == b53_default_pvid(dev)) 1532 untagged = true; 1533 1534 vl->members |= BIT(port); 1535 if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port)) 1536 vl->untag |= BIT(port); 1537 else 1538 vl->untag &= ~BIT(port); 1539 1540 b53_set_vlan_entry(dev, vlan->vid, vl); 1541 b53_fast_age_vlan(dev, vlan->vid); 1542 1543 if (pvid && !dsa_is_cpu_port(ds, port)) { 1544 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), 1545 vlan->vid); 1546 b53_fast_age_vlan(dev, vlan->vid); 1547 } 1548 1549 return 0; 1550 } 1551 EXPORT_SYMBOL(b53_vlan_add); 1552 1553 int b53_vlan_del(struct dsa_switch *ds, int port, 1554 const struct switchdev_obj_port_vlan *vlan) 1555 { 1556 struct b53_device *dev = ds->priv; 1557 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; 1558 struct b53_vlan *vl; 1559 u16 pvid; 1560 1561 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid); 1562 1563 vl = &dev->vlans[vlan->vid]; 1564 1565 b53_get_vlan_entry(dev, vlan->vid, vl); 1566 1567 vl->members &= ~BIT(port); 1568 1569 if (pvid == vlan->vid) 1570 pvid = b53_default_pvid(dev); 1571 1572 if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port)) 1573 vl->untag &= ~(BIT(port)); 1574 1575 b53_set_vlan_entry(dev, vlan->vid, vl); 1576 b53_fast_age_vlan(dev, vlan->vid); 1577 1578 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid); 1579 b53_fast_age_vlan(dev, pvid); 1580 1581 return 0; 1582 } 1583 EXPORT_SYMBOL(b53_vlan_del); 1584 1585 /* Address Resolution Logic routines. Caller must hold &dev->arl_mutex. */ 1586 static int b53_arl_op_wait(struct b53_device *dev) 1587 { 1588 unsigned int timeout = 10; 1589 u8 reg; 1590 1591 do { 1592 b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, ®); 1593 if (!(reg & ARLTBL_START_DONE)) 1594 return 0; 1595 1596 usleep_range(1000, 2000); 1597 } while (timeout--); 1598 1599 dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg); 1600 1601 return -ETIMEDOUT; 1602 } 1603 1604 static int b53_arl_rw_op(struct b53_device *dev, unsigned int op) 1605 { 1606 u8 reg; 1607 1608 if (op > ARLTBL_RW) 1609 return -EINVAL; 1610 1611 b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, ®); 1612 reg |= ARLTBL_START_DONE; 1613 if (op) 1614 reg |= ARLTBL_RW; 1615 else 1616 reg &= ~ARLTBL_RW; 1617 if (dev->vlan_enabled) 1618 reg &= ~ARLTBL_IVL_SVL_SELECT; 1619 else 1620 reg |= ARLTBL_IVL_SVL_SELECT; 1621 b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg); 1622 1623 return b53_arl_op_wait(dev); 1624 } 1625 1626 static int b53_arl_read(struct b53_device *dev, u64 mac, 1627 u16 vid, struct b53_arl_entry *ent, u8 *idx) 1628 { 1629 DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES); 1630 unsigned int i; 1631 int ret; 1632 1633 ret = b53_arl_op_wait(dev); 1634 if (ret) 1635 return ret; 1636 1637 bitmap_zero(free_bins, dev->num_arl_bins); 1638 1639 /* Read the bins */ 1640 for (i = 0; i < dev->num_arl_bins; i++) { 1641 u64 mac_vid; 1642 u32 fwd_entry; 1643 1644 b53_read64(dev, B53_ARLIO_PAGE, 1645 B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid); 1646 b53_read32(dev, B53_ARLIO_PAGE, 1647 B53_ARLTBL_DATA_ENTRY(i), &fwd_entry); 1648 b53_arl_to_entry(ent, mac_vid, fwd_entry); 1649 1650 if (!(fwd_entry & ARLTBL_VALID)) { 1651 set_bit(i, free_bins); 1652 continue; 1653 } 1654 if ((mac_vid & ARLTBL_MAC_MASK) != mac) 1655 continue; 1656 if (dev->vlan_enabled && 1657 ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid) 1658 continue; 1659 *idx = i; 1660 return 0; 1661 } 1662 1663 *idx = find_first_bit(free_bins, dev->num_arl_bins); 1664 return *idx >= dev->num_arl_bins ? -ENOSPC : -ENOENT; 1665 } 1666 1667 static int b53_arl_op(struct b53_device *dev, int op, int port, 1668 const unsigned char *addr, u16 vid, bool is_valid) 1669 { 1670 struct b53_arl_entry ent; 1671 u32 fwd_entry; 1672 u64 mac, mac_vid = 0; 1673 u8 idx = 0; 1674 int ret; 1675 1676 /* Convert the array into a 64-bit MAC */ 1677 mac = ether_addr_to_u64(addr); 1678 1679 /* Perform a read for the given MAC and VID */ 1680 b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac); 1681 b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid); 1682 1683 /* Issue a read operation for this MAC */ 1684 ret = b53_arl_rw_op(dev, 1); 1685 if (ret) 1686 return ret; 1687 1688 ret = b53_arl_read(dev, mac, vid, &ent, &idx); 1689 1690 /* If this is a read, just finish now */ 1691 if (op) 1692 return ret; 1693 1694 switch (ret) { 1695 case -ETIMEDOUT: 1696 return ret; 1697 case -ENOSPC: 1698 dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n", 1699 addr, vid); 1700 return is_valid ? ret : 0; 1701 case -ENOENT: 1702 /* We could not find a matching MAC, so reset to a new entry */ 1703 dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n", 1704 addr, vid, idx); 1705 fwd_entry = 0; 1706 break; 1707 default: 1708 dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n", 1709 addr, vid, idx); 1710 break; 1711 } 1712 1713 /* For multicast address, the port is a bitmask and the validity 1714 * is determined by having at least one port being still active 1715 */ 1716 if (!is_multicast_ether_addr(addr)) { 1717 ent.port = port; 1718 ent.is_valid = is_valid; 1719 } else { 1720 if (is_valid) 1721 ent.port |= BIT(port); 1722 else 1723 ent.port &= ~BIT(port); 1724 1725 ent.is_valid = !!(ent.port); 1726 } 1727 1728 ent.vid = vid; 1729 ent.is_static = true; 1730 ent.is_age = false; 1731 memcpy(ent.mac, addr, ETH_ALEN); 1732 b53_arl_from_entry(&mac_vid, &fwd_entry, &ent); 1733 1734 b53_write64(dev, B53_ARLIO_PAGE, 1735 B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid); 1736 b53_write32(dev, B53_ARLIO_PAGE, 1737 B53_ARLTBL_DATA_ENTRY(idx), fwd_entry); 1738 1739 return b53_arl_rw_op(dev, 0); 1740 } 1741 1742 int b53_fdb_add(struct dsa_switch *ds, int port, 1743 const unsigned char *addr, u16 vid, 1744 struct dsa_db db) 1745 { 1746 struct b53_device *priv = ds->priv; 1747 int ret; 1748 1749 /* 5325 and 5365 require some more massaging, but could 1750 * be supported eventually 1751 */ 1752 if (is5325(priv) || is5365(priv)) 1753 return -EOPNOTSUPP; 1754 1755 mutex_lock(&priv->arl_mutex); 1756 ret = b53_arl_op(priv, 0, port, addr, vid, true); 1757 mutex_unlock(&priv->arl_mutex); 1758 1759 return ret; 1760 } 1761 EXPORT_SYMBOL(b53_fdb_add); 1762 1763 int b53_fdb_del(struct dsa_switch *ds, int port, 1764 const unsigned char *addr, u16 vid, 1765 struct dsa_db db) 1766 { 1767 struct b53_device *priv = ds->priv; 1768 int ret; 1769 1770 mutex_lock(&priv->arl_mutex); 1771 ret = b53_arl_op(priv, 0, port, addr, vid, false); 1772 mutex_unlock(&priv->arl_mutex); 1773 1774 return ret; 1775 } 1776 EXPORT_SYMBOL(b53_fdb_del); 1777 1778 static int b53_arl_search_wait(struct b53_device *dev) 1779 { 1780 unsigned int timeout = 1000; 1781 u8 reg; 1782 1783 do { 1784 b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, ®); 1785 if (!(reg & ARL_SRCH_STDN)) 1786 return 0; 1787 1788 if (reg & ARL_SRCH_VLID) 1789 return 0; 1790 1791 usleep_range(1000, 2000); 1792 } while (timeout--); 1793 1794 return -ETIMEDOUT; 1795 } 1796 1797 static void b53_arl_search_rd(struct b53_device *dev, u8 idx, 1798 struct b53_arl_entry *ent) 1799 { 1800 u64 mac_vid; 1801 u32 fwd_entry; 1802 1803 b53_read64(dev, B53_ARLIO_PAGE, 1804 B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid); 1805 b53_read32(dev, B53_ARLIO_PAGE, 1806 B53_ARL_SRCH_RSTL(idx), &fwd_entry); 1807 b53_arl_to_entry(ent, mac_vid, fwd_entry); 1808 } 1809 1810 static int b53_fdb_copy(int port, const struct b53_arl_entry *ent, 1811 dsa_fdb_dump_cb_t *cb, void *data) 1812 { 1813 if (!ent->is_valid) 1814 return 0; 1815 1816 if (port != ent->port) 1817 return 0; 1818 1819 return cb(ent->mac, ent->vid, ent->is_static, data); 1820 } 1821 1822 int b53_fdb_dump(struct dsa_switch *ds, int port, 1823 dsa_fdb_dump_cb_t *cb, void *data) 1824 { 1825 struct b53_device *priv = ds->priv; 1826 struct b53_arl_entry results[2]; 1827 unsigned int count = 0; 1828 int ret; 1829 u8 reg; 1830 1831 mutex_lock(&priv->arl_mutex); 1832 1833 /* Start search operation */ 1834 reg = ARL_SRCH_STDN; 1835 b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg); 1836 1837 do { 1838 ret = b53_arl_search_wait(priv); 1839 if (ret) 1840 break; 1841 1842 b53_arl_search_rd(priv, 0, &results[0]); 1843 ret = b53_fdb_copy(port, &results[0], cb, data); 1844 if (ret) 1845 break; 1846 1847 if (priv->num_arl_bins > 2) { 1848 b53_arl_search_rd(priv, 1, &results[1]); 1849 ret = b53_fdb_copy(port, &results[1], cb, data); 1850 if (ret) 1851 break; 1852 1853 if (!results[0].is_valid && !results[1].is_valid) 1854 break; 1855 } 1856 1857 } while (count++ < b53_max_arl_entries(priv) / 2); 1858 1859 mutex_unlock(&priv->arl_mutex); 1860 1861 return 0; 1862 } 1863 EXPORT_SYMBOL(b53_fdb_dump); 1864 1865 int b53_mdb_add(struct dsa_switch *ds, int port, 1866 const struct switchdev_obj_port_mdb *mdb, 1867 struct dsa_db db) 1868 { 1869 struct b53_device *priv = ds->priv; 1870 int ret; 1871 1872 /* 5325 and 5365 require some more massaging, but could 1873 * be supported eventually 1874 */ 1875 if (is5325(priv) || is5365(priv)) 1876 return -EOPNOTSUPP; 1877 1878 mutex_lock(&priv->arl_mutex); 1879 ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, true); 1880 mutex_unlock(&priv->arl_mutex); 1881 1882 return ret; 1883 } 1884 EXPORT_SYMBOL(b53_mdb_add); 1885 1886 int b53_mdb_del(struct dsa_switch *ds, int port, 1887 const struct switchdev_obj_port_mdb *mdb, 1888 struct dsa_db db) 1889 { 1890 struct b53_device *priv = ds->priv; 1891 int ret; 1892 1893 mutex_lock(&priv->arl_mutex); 1894 ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, false); 1895 mutex_unlock(&priv->arl_mutex); 1896 if (ret) 1897 dev_err(ds->dev, "failed to delete MDB entry\n"); 1898 1899 return ret; 1900 } 1901 EXPORT_SYMBOL(b53_mdb_del); 1902 1903 int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge, 1904 bool *tx_fwd_offload, struct netlink_ext_ack *extack) 1905 { 1906 struct b53_device *dev = ds->priv; 1907 s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index; 1908 u16 pvlan, reg; 1909 unsigned int i; 1910 1911 /* On 7278, port 7 which connects to the ASP should only receive 1912 * traffic from matching CFP rules. 1913 */ 1914 if (dev->chip_id == BCM7278_DEVICE_ID && port == 7) 1915 return -EINVAL; 1916 1917 /* Make this port leave the all VLANs join since we will have proper 1918 * VLAN entries from now on 1919 */ 1920 if (is58xx(dev)) { 1921 b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®); 1922 reg &= ~BIT(port); 1923 if ((reg & BIT(cpu_port)) == BIT(cpu_port)) 1924 reg &= ~BIT(cpu_port); 1925 b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg); 1926 } 1927 1928 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan); 1929 1930 b53_for_each_port(dev, i) { 1931 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge)) 1932 continue; 1933 1934 /* Add this local port to the remote port VLAN control 1935 * membership and update the remote port bitmask 1936 */ 1937 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), ®); 1938 reg |= BIT(port); 1939 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg); 1940 dev->ports[i].vlan_ctl_mask = reg; 1941 1942 pvlan |= BIT(i); 1943 } 1944 1945 /* Configure the local port VLAN control membership to include 1946 * remote ports and update the local port bitmask 1947 */ 1948 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan); 1949 dev->ports[port].vlan_ctl_mask = pvlan; 1950 1951 return 0; 1952 } 1953 EXPORT_SYMBOL(b53_br_join); 1954 1955 void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge) 1956 { 1957 struct b53_device *dev = ds->priv; 1958 struct b53_vlan *vl = &dev->vlans[0]; 1959 s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index; 1960 unsigned int i; 1961 u16 pvlan, reg, pvid; 1962 1963 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan); 1964 1965 b53_for_each_port(dev, i) { 1966 /* Don't touch the remaining ports */ 1967 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge)) 1968 continue; 1969 1970 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), ®); 1971 reg &= ~BIT(port); 1972 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg); 1973 dev->ports[port].vlan_ctl_mask = reg; 1974 1975 /* Prevent self removal to preserve isolation */ 1976 if (port != i) 1977 pvlan &= ~BIT(i); 1978 } 1979 1980 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan); 1981 dev->ports[port].vlan_ctl_mask = pvlan; 1982 1983 pvid = b53_default_pvid(dev); 1984 1985 /* Make this port join all VLANs without VLAN entries */ 1986 if (is58xx(dev)) { 1987 b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®); 1988 reg |= BIT(port); 1989 if (!(reg & BIT(cpu_port))) 1990 reg |= BIT(cpu_port); 1991 b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg); 1992 } else { 1993 b53_get_vlan_entry(dev, pvid, vl); 1994 vl->members |= BIT(port) | BIT(cpu_port); 1995 vl->untag |= BIT(port) | BIT(cpu_port); 1996 b53_set_vlan_entry(dev, pvid, vl); 1997 } 1998 } 1999 EXPORT_SYMBOL(b53_br_leave); 2000 2001 void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state) 2002 { 2003 struct b53_device *dev = ds->priv; 2004 u8 hw_state; 2005 u8 reg; 2006 2007 switch (state) { 2008 case BR_STATE_DISABLED: 2009 hw_state = PORT_CTRL_DIS_STATE; 2010 break; 2011 case BR_STATE_LISTENING: 2012 hw_state = PORT_CTRL_LISTEN_STATE; 2013 break; 2014 case BR_STATE_LEARNING: 2015 hw_state = PORT_CTRL_LEARN_STATE; 2016 break; 2017 case BR_STATE_FORWARDING: 2018 hw_state = PORT_CTRL_FWD_STATE; 2019 break; 2020 case BR_STATE_BLOCKING: 2021 hw_state = PORT_CTRL_BLOCK_STATE; 2022 break; 2023 default: 2024 dev_err(ds->dev, "invalid STP state: %d\n", state); 2025 return; 2026 } 2027 2028 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®); 2029 reg &= ~PORT_CTRL_STP_STATE_MASK; 2030 reg |= hw_state; 2031 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg); 2032 } 2033 EXPORT_SYMBOL(b53_br_set_stp_state); 2034 2035 void b53_br_fast_age(struct dsa_switch *ds, int port) 2036 { 2037 struct b53_device *dev = ds->priv; 2038 2039 if (b53_fast_age_port(dev, port)) 2040 dev_err(ds->dev, "fast ageing failed\n"); 2041 } 2042 EXPORT_SYMBOL(b53_br_fast_age); 2043 2044 int b53_br_flags_pre(struct dsa_switch *ds, int port, 2045 struct switchdev_brport_flags flags, 2046 struct netlink_ext_ack *extack) 2047 { 2048 if (flags.mask & ~(BR_FLOOD | BR_MCAST_FLOOD | BR_LEARNING)) 2049 return -EINVAL; 2050 2051 return 0; 2052 } 2053 EXPORT_SYMBOL(b53_br_flags_pre); 2054 2055 int b53_br_flags(struct dsa_switch *ds, int port, 2056 struct switchdev_brport_flags flags, 2057 struct netlink_ext_ack *extack) 2058 { 2059 if (flags.mask & BR_FLOOD) 2060 b53_port_set_ucast_flood(ds->priv, port, 2061 !!(flags.val & BR_FLOOD)); 2062 if (flags.mask & BR_MCAST_FLOOD) 2063 b53_port_set_mcast_flood(ds->priv, port, 2064 !!(flags.val & BR_MCAST_FLOOD)); 2065 if (flags.mask & BR_LEARNING) 2066 b53_port_set_learning(ds->priv, port, 2067 !!(flags.val & BR_LEARNING)); 2068 2069 return 0; 2070 } 2071 EXPORT_SYMBOL(b53_br_flags); 2072 2073 static bool b53_possible_cpu_port(struct dsa_switch *ds, int port) 2074 { 2075 /* Broadcom switches will accept enabling Broadcom tags on the 2076 * following ports: 5, 7 and 8, any other port is not supported 2077 */ 2078 switch (port) { 2079 case B53_CPU_PORT_25: 2080 case 7: 2081 case B53_CPU_PORT: 2082 return true; 2083 } 2084 2085 return false; 2086 } 2087 2088 static bool b53_can_enable_brcm_tags(struct dsa_switch *ds, int port, 2089 enum dsa_tag_protocol tag_protocol) 2090 { 2091 bool ret = b53_possible_cpu_port(ds, port); 2092 2093 if (!ret) { 2094 dev_warn(ds->dev, "Port %d is not Broadcom tag capable\n", 2095 port); 2096 return ret; 2097 } 2098 2099 switch (tag_protocol) { 2100 case DSA_TAG_PROTO_BRCM: 2101 case DSA_TAG_PROTO_BRCM_PREPEND: 2102 dev_warn(ds->dev, 2103 "Port %d is stacked to Broadcom tag switch\n", port); 2104 ret = false; 2105 break; 2106 default: 2107 ret = true; 2108 break; 2109 } 2110 2111 return ret; 2112 } 2113 2114 enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port, 2115 enum dsa_tag_protocol mprot) 2116 { 2117 struct b53_device *dev = ds->priv; 2118 2119 if (!b53_can_enable_brcm_tags(ds, port, mprot)) { 2120 dev->tag_protocol = DSA_TAG_PROTO_NONE; 2121 goto out; 2122 } 2123 2124 /* Older models require a different 6 byte tag */ 2125 if (is5325(dev) || is5365(dev) || is63xx(dev)) { 2126 dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY; 2127 goto out; 2128 } 2129 2130 /* Broadcom BCM58xx chips have a flow accelerator on Port 8 2131 * which requires us to use the prepended Broadcom tag type 2132 */ 2133 if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT) { 2134 dev->tag_protocol = DSA_TAG_PROTO_BRCM_PREPEND; 2135 goto out; 2136 } 2137 2138 dev->tag_protocol = DSA_TAG_PROTO_BRCM; 2139 out: 2140 return dev->tag_protocol; 2141 } 2142 EXPORT_SYMBOL(b53_get_tag_protocol); 2143 2144 int b53_mirror_add(struct dsa_switch *ds, int port, 2145 struct dsa_mall_mirror_tc_entry *mirror, bool ingress, 2146 struct netlink_ext_ack *extack) 2147 { 2148 struct b53_device *dev = ds->priv; 2149 u16 reg, loc; 2150 2151 if (ingress) 2152 loc = B53_IG_MIR_CTL; 2153 else 2154 loc = B53_EG_MIR_CTL; 2155 2156 b53_read16(dev, B53_MGMT_PAGE, loc, ®); 2157 reg |= BIT(port); 2158 b53_write16(dev, B53_MGMT_PAGE, loc, reg); 2159 2160 b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, ®); 2161 reg &= ~CAP_PORT_MASK; 2162 reg |= mirror->to_local_port; 2163 reg |= MIRROR_EN; 2164 b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg); 2165 2166 return 0; 2167 } 2168 EXPORT_SYMBOL(b53_mirror_add); 2169 2170 void b53_mirror_del(struct dsa_switch *ds, int port, 2171 struct dsa_mall_mirror_tc_entry *mirror) 2172 { 2173 struct b53_device *dev = ds->priv; 2174 bool loc_disable = false, other_loc_disable = false; 2175 u16 reg, loc; 2176 2177 if (mirror->ingress) 2178 loc = B53_IG_MIR_CTL; 2179 else 2180 loc = B53_EG_MIR_CTL; 2181 2182 /* Update the desired ingress/egress register */ 2183 b53_read16(dev, B53_MGMT_PAGE, loc, ®); 2184 reg &= ~BIT(port); 2185 if (!(reg & MIRROR_MASK)) 2186 loc_disable = true; 2187 b53_write16(dev, B53_MGMT_PAGE, loc, reg); 2188 2189 /* Now look at the other one to know if we can disable mirroring 2190 * entirely 2191 */ 2192 if (mirror->ingress) 2193 b53_read16(dev, B53_MGMT_PAGE, B53_EG_MIR_CTL, ®); 2194 else 2195 b53_read16(dev, B53_MGMT_PAGE, B53_IG_MIR_CTL, ®); 2196 if (!(reg & MIRROR_MASK)) 2197 other_loc_disable = true; 2198 2199 b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, ®); 2200 /* Both no longer have ports, let's disable mirroring */ 2201 if (loc_disable && other_loc_disable) { 2202 reg &= ~MIRROR_EN; 2203 reg &= ~mirror->to_local_port; 2204 } 2205 b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg); 2206 } 2207 EXPORT_SYMBOL(b53_mirror_del); 2208 2209 /* Returns 0 if EEE was not enabled, or 1 otherwise 2210 */ 2211 int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy) 2212 { 2213 int ret; 2214 2215 ret = phy_init_eee(phy, false); 2216 if (ret) 2217 return 0; 2218 2219 b53_eee_enable_set(ds, port, true); 2220 2221 return 1; 2222 } 2223 EXPORT_SYMBOL(b53_eee_init); 2224 2225 int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e) 2226 { 2227 struct b53_device *dev = ds->priv; 2228 2229 if (is5325(dev) || is5365(dev)) 2230 return -EOPNOTSUPP; 2231 2232 return 0; 2233 } 2234 EXPORT_SYMBOL(b53_get_mac_eee); 2235 2236 int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e) 2237 { 2238 struct b53_device *dev = ds->priv; 2239 struct ethtool_keee *p = &dev->ports[port].eee; 2240 2241 if (is5325(dev) || is5365(dev)) 2242 return -EOPNOTSUPP; 2243 2244 p->eee_enabled = e->eee_enabled; 2245 b53_eee_enable_set(ds, port, e->eee_enabled); 2246 2247 return 0; 2248 } 2249 EXPORT_SYMBOL(b53_set_mac_eee); 2250 2251 static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu) 2252 { 2253 struct b53_device *dev = ds->priv; 2254 bool enable_jumbo; 2255 bool allow_10_100; 2256 2257 if (is5325(dev) || is5365(dev)) 2258 return -EOPNOTSUPP; 2259 2260 enable_jumbo = (mtu >= JMS_MIN_SIZE); 2261 allow_10_100 = (dev->chip_id == BCM583XX_DEVICE_ID); 2262 2263 return b53_set_jumbo(dev, enable_jumbo, allow_10_100); 2264 } 2265 2266 static int b53_get_max_mtu(struct dsa_switch *ds, int port) 2267 { 2268 return JMS_MAX_SIZE; 2269 } 2270 2271 static const struct dsa_switch_ops b53_switch_ops = { 2272 .get_tag_protocol = b53_get_tag_protocol, 2273 .setup = b53_setup, 2274 .teardown = b53_teardown, 2275 .get_strings = b53_get_strings, 2276 .get_ethtool_stats = b53_get_ethtool_stats, 2277 .get_sset_count = b53_get_sset_count, 2278 .get_ethtool_phy_stats = b53_get_ethtool_phy_stats, 2279 .phy_read = b53_phy_read16, 2280 .phy_write = b53_phy_write16, 2281 .adjust_link = b53_adjust_link, 2282 .phylink_get_caps = b53_phylink_get_caps, 2283 .phylink_mac_select_pcs = b53_phylink_mac_select_pcs, 2284 .phylink_mac_config = b53_phylink_mac_config, 2285 .phylink_mac_link_down = b53_phylink_mac_link_down, 2286 .phylink_mac_link_up = b53_phylink_mac_link_up, 2287 .port_enable = b53_enable_port, 2288 .port_disable = b53_disable_port, 2289 .get_mac_eee = b53_get_mac_eee, 2290 .set_mac_eee = b53_set_mac_eee, 2291 .port_bridge_join = b53_br_join, 2292 .port_bridge_leave = b53_br_leave, 2293 .port_pre_bridge_flags = b53_br_flags_pre, 2294 .port_bridge_flags = b53_br_flags, 2295 .port_stp_state_set = b53_br_set_stp_state, 2296 .port_fast_age = b53_br_fast_age, 2297 .port_vlan_filtering = b53_vlan_filtering, 2298 .port_vlan_add = b53_vlan_add, 2299 .port_vlan_del = b53_vlan_del, 2300 .port_fdb_dump = b53_fdb_dump, 2301 .port_fdb_add = b53_fdb_add, 2302 .port_fdb_del = b53_fdb_del, 2303 .port_mirror_add = b53_mirror_add, 2304 .port_mirror_del = b53_mirror_del, 2305 .port_mdb_add = b53_mdb_add, 2306 .port_mdb_del = b53_mdb_del, 2307 .port_max_mtu = b53_get_max_mtu, 2308 .port_change_mtu = b53_change_mtu, 2309 }; 2310 2311 struct b53_chip_data { 2312 u32 chip_id; 2313 const char *dev_name; 2314 u16 vlans; 2315 u16 enabled_ports; 2316 u8 imp_port; 2317 u8 cpu_port; 2318 u8 vta_regs[3]; 2319 u8 arl_bins; 2320 u16 arl_buckets; 2321 u8 duplex_reg; 2322 u8 jumbo_pm_reg; 2323 u8 jumbo_size_reg; 2324 }; 2325 2326 #define B53_VTA_REGS \ 2327 { B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY } 2328 #define B53_VTA_REGS_9798 \ 2329 { B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 } 2330 #define B53_VTA_REGS_63XX \ 2331 { B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX } 2332 2333 static const struct b53_chip_data b53_switch_chips[] = { 2334 { 2335 .chip_id = BCM5325_DEVICE_ID, 2336 .dev_name = "BCM5325", 2337 .vlans = 16, 2338 .enabled_ports = 0x3f, 2339 .arl_bins = 2, 2340 .arl_buckets = 1024, 2341 .imp_port = 5, 2342 .duplex_reg = B53_DUPLEX_STAT_FE, 2343 }, 2344 { 2345 .chip_id = BCM5365_DEVICE_ID, 2346 .dev_name = "BCM5365", 2347 .vlans = 256, 2348 .enabled_ports = 0x3f, 2349 .arl_bins = 2, 2350 .arl_buckets = 1024, 2351 .imp_port = 5, 2352 .duplex_reg = B53_DUPLEX_STAT_FE, 2353 }, 2354 { 2355 .chip_id = BCM5389_DEVICE_ID, 2356 .dev_name = "BCM5389", 2357 .vlans = 4096, 2358 .enabled_ports = 0x11f, 2359 .arl_bins = 4, 2360 .arl_buckets = 1024, 2361 .imp_port = 8, 2362 .vta_regs = B53_VTA_REGS, 2363 .duplex_reg = B53_DUPLEX_STAT_GE, 2364 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2365 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2366 }, 2367 { 2368 .chip_id = BCM5395_DEVICE_ID, 2369 .dev_name = "BCM5395", 2370 .vlans = 4096, 2371 .enabled_ports = 0x11f, 2372 .arl_bins = 4, 2373 .arl_buckets = 1024, 2374 .imp_port = 8, 2375 .vta_regs = B53_VTA_REGS, 2376 .duplex_reg = B53_DUPLEX_STAT_GE, 2377 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2378 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2379 }, 2380 { 2381 .chip_id = BCM5397_DEVICE_ID, 2382 .dev_name = "BCM5397", 2383 .vlans = 4096, 2384 .enabled_ports = 0x11f, 2385 .arl_bins = 4, 2386 .arl_buckets = 1024, 2387 .imp_port = 8, 2388 .vta_regs = B53_VTA_REGS_9798, 2389 .duplex_reg = B53_DUPLEX_STAT_GE, 2390 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2391 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2392 }, 2393 { 2394 .chip_id = BCM5398_DEVICE_ID, 2395 .dev_name = "BCM5398", 2396 .vlans = 4096, 2397 .enabled_ports = 0x17f, 2398 .arl_bins = 4, 2399 .arl_buckets = 1024, 2400 .imp_port = 8, 2401 .vta_regs = B53_VTA_REGS_9798, 2402 .duplex_reg = B53_DUPLEX_STAT_GE, 2403 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2404 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2405 }, 2406 { 2407 .chip_id = BCM53115_DEVICE_ID, 2408 .dev_name = "BCM53115", 2409 .vlans = 4096, 2410 .enabled_ports = 0x11f, 2411 .arl_bins = 4, 2412 .arl_buckets = 1024, 2413 .vta_regs = B53_VTA_REGS, 2414 .imp_port = 8, 2415 .duplex_reg = B53_DUPLEX_STAT_GE, 2416 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2417 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2418 }, 2419 { 2420 .chip_id = BCM53125_DEVICE_ID, 2421 .dev_name = "BCM53125", 2422 .vlans = 4096, 2423 .enabled_ports = 0x1ff, 2424 .arl_bins = 4, 2425 .arl_buckets = 1024, 2426 .imp_port = 8, 2427 .vta_regs = B53_VTA_REGS, 2428 .duplex_reg = B53_DUPLEX_STAT_GE, 2429 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2430 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2431 }, 2432 { 2433 .chip_id = BCM53128_DEVICE_ID, 2434 .dev_name = "BCM53128", 2435 .vlans = 4096, 2436 .enabled_ports = 0x1ff, 2437 .arl_bins = 4, 2438 .arl_buckets = 1024, 2439 .imp_port = 8, 2440 .vta_regs = B53_VTA_REGS, 2441 .duplex_reg = B53_DUPLEX_STAT_GE, 2442 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2443 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2444 }, 2445 { 2446 .chip_id = BCM63XX_DEVICE_ID, 2447 .dev_name = "BCM63xx", 2448 .vlans = 4096, 2449 .enabled_ports = 0, /* pdata must provide them */ 2450 .arl_bins = 4, 2451 .arl_buckets = 1024, 2452 .imp_port = 8, 2453 .vta_regs = B53_VTA_REGS_63XX, 2454 .duplex_reg = B53_DUPLEX_STAT_63XX, 2455 .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX, 2456 .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX, 2457 }, 2458 { 2459 .chip_id = BCM63268_DEVICE_ID, 2460 .dev_name = "BCM63268", 2461 .vlans = 4096, 2462 .enabled_ports = 0, /* pdata must provide them */ 2463 .arl_bins = 4, 2464 .arl_buckets = 1024, 2465 .imp_port = 8, 2466 .vta_regs = B53_VTA_REGS_63XX, 2467 .duplex_reg = B53_DUPLEX_STAT_63XX, 2468 .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX, 2469 .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX, 2470 }, 2471 { 2472 .chip_id = BCM53010_DEVICE_ID, 2473 .dev_name = "BCM53010", 2474 .vlans = 4096, 2475 .enabled_ports = 0x1bf, 2476 .arl_bins = 4, 2477 .arl_buckets = 1024, 2478 .imp_port = 8, 2479 .vta_regs = B53_VTA_REGS, 2480 .duplex_reg = B53_DUPLEX_STAT_GE, 2481 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2482 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2483 }, 2484 { 2485 .chip_id = BCM53011_DEVICE_ID, 2486 .dev_name = "BCM53011", 2487 .vlans = 4096, 2488 .enabled_ports = 0x1bf, 2489 .arl_bins = 4, 2490 .arl_buckets = 1024, 2491 .imp_port = 8, 2492 .vta_regs = B53_VTA_REGS, 2493 .duplex_reg = B53_DUPLEX_STAT_GE, 2494 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2495 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2496 }, 2497 { 2498 .chip_id = BCM53012_DEVICE_ID, 2499 .dev_name = "BCM53012", 2500 .vlans = 4096, 2501 .enabled_ports = 0x1bf, 2502 .arl_bins = 4, 2503 .arl_buckets = 1024, 2504 .imp_port = 8, 2505 .vta_regs = B53_VTA_REGS, 2506 .duplex_reg = B53_DUPLEX_STAT_GE, 2507 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2508 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2509 }, 2510 { 2511 .chip_id = BCM53018_DEVICE_ID, 2512 .dev_name = "BCM53018", 2513 .vlans = 4096, 2514 .enabled_ports = 0x1bf, 2515 .arl_bins = 4, 2516 .arl_buckets = 1024, 2517 .imp_port = 8, 2518 .vta_regs = B53_VTA_REGS, 2519 .duplex_reg = B53_DUPLEX_STAT_GE, 2520 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2521 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2522 }, 2523 { 2524 .chip_id = BCM53019_DEVICE_ID, 2525 .dev_name = "BCM53019", 2526 .vlans = 4096, 2527 .enabled_ports = 0x1bf, 2528 .arl_bins = 4, 2529 .arl_buckets = 1024, 2530 .imp_port = 8, 2531 .vta_regs = B53_VTA_REGS, 2532 .duplex_reg = B53_DUPLEX_STAT_GE, 2533 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2534 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2535 }, 2536 { 2537 .chip_id = BCM58XX_DEVICE_ID, 2538 .dev_name = "BCM585xx/586xx/88312", 2539 .vlans = 4096, 2540 .enabled_ports = 0x1ff, 2541 .arl_bins = 4, 2542 .arl_buckets = 1024, 2543 .imp_port = 8, 2544 .vta_regs = B53_VTA_REGS, 2545 .duplex_reg = B53_DUPLEX_STAT_GE, 2546 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2547 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2548 }, 2549 { 2550 .chip_id = BCM583XX_DEVICE_ID, 2551 .dev_name = "BCM583xx/11360", 2552 .vlans = 4096, 2553 .enabled_ports = 0x103, 2554 .arl_bins = 4, 2555 .arl_buckets = 1024, 2556 .imp_port = 8, 2557 .vta_regs = B53_VTA_REGS, 2558 .duplex_reg = B53_DUPLEX_STAT_GE, 2559 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2560 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2561 }, 2562 /* Starfighter 2 */ 2563 { 2564 .chip_id = BCM4908_DEVICE_ID, 2565 .dev_name = "BCM4908", 2566 .vlans = 4096, 2567 .enabled_ports = 0x1bf, 2568 .arl_bins = 4, 2569 .arl_buckets = 256, 2570 .imp_port = 8, 2571 .vta_regs = B53_VTA_REGS, 2572 .duplex_reg = B53_DUPLEX_STAT_GE, 2573 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2574 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2575 }, 2576 { 2577 .chip_id = BCM7445_DEVICE_ID, 2578 .dev_name = "BCM7445", 2579 .vlans = 4096, 2580 .enabled_ports = 0x1ff, 2581 .arl_bins = 4, 2582 .arl_buckets = 1024, 2583 .imp_port = 8, 2584 .vta_regs = B53_VTA_REGS, 2585 .duplex_reg = B53_DUPLEX_STAT_GE, 2586 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2587 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2588 }, 2589 { 2590 .chip_id = BCM7278_DEVICE_ID, 2591 .dev_name = "BCM7278", 2592 .vlans = 4096, 2593 .enabled_ports = 0x1ff, 2594 .arl_bins = 4, 2595 .arl_buckets = 256, 2596 .imp_port = 8, 2597 .vta_regs = B53_VTA_REGS, 2598 .duplex_reg = B53_DUPLEX_STAT_GE, 2599 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2600 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2601 }, 2602 { 2603 .chip_id = BCM53134_DEVICE_ID, 2604 .dev_name = "BCM53134", 2605 .vlans = 4096, 2606 .enabled_ports = 0x12f, 2607 .imp_port = 8, 2608 .cpu_port = B53_CPU_PORT, 2609 .vta_regs = B53_VTA_REGS, 2610 .arl_bins = 4, 2611 .arl_buckets = 1024, 2612 .duplex_reg = B53_DUPLEX_STAT_GE, 2613 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2614 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2615 }, 2616 }; 2617 2618 static int b53_switch_init(struct b53_device *dev) 2619 { 2620 unsigned int i; 2621 int ret; 2622 2623 for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) { 2624 const struct b53_chip_data *chip = &b53_switch_chips[i]; 2625 2626 if (chip->chip_id == dev->chip_id) { 2627 if (!dev->enabled_ports) 2628 dev->enabled_ports = chip->enabled_ports; 2629 dev->name = chip->dev_name; 2630 dev->duplex_reg = chip->duplex_reg; 2631 dev->vta_regs[0] = chip->vta_regs[0]; 2632 dev->vta_regs[1] = chip->vta_regs[1]; 2633 dev->vta_regs[2] = chip->vta_regs[2]; 2634 dev->jumbo_pm_reg = chip->jumbo_pm_reg; 2635 dev->imp_port = chip->imp_port; 2636 dev->num_vlans = chip->vlans; 2637 dev->num_arl_bins = chip->arl_bins; 2638 dev->num_arl_buckets = chip->arl_buckets; 2639 break; 2640 } 2641 } 2642 2643 /* check which BCM5325x version we have */ 2644 if (is5325(dev)) { 2645 u8 vc4; 2646 2647 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4); 2648 2649 /* check reserved bits */ 2650 switch (vc4 & 3) { 2651 case 1: 2652 /* BCM5325E */ 2653 break; 2654 case 3: 2655 /* BCM5325F - do not use port 4 */ 2656 dev->enabled_ports &= ~BIT(4); 2657 break; 2658 default: 2659 /* On the BCM47XX SoCs this is the supported internal switch.*/ 2660 #ifndef CONFIG_BCM47XX 2661 /* BCM5325M */ 2662 return -EINVAL; 2663 #else 2664 break; 2665 #endif 2666 } 2667 } 2668 2669 dev->num_ports = fls(dev->enabled_ports); 2670 2671 dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS); 2672 2673 /* Include non standard CPU port built-in PHYs to be probed */ 2674 if (is539x(dev) || is531x5(dev)) { 2675 for (i = 0; i < dev->num_ports; i++) { 2676 if (!(dev->ds->phys_mii_mask & BIT(i)) && 2677 !b53_possible_cpu_port(dev->ds, i)) 2678 dev->ds->phys_mii_mask |= BIT(i); 2679 } 2680 } 2681 2682 dev->ports = devm_kcalloc(dev->dev, 2683 dev->num_ports, sizeof(struct b53_port), 2684 GFP_KERNEL); 2685 if (!dev->ports) 2686 return -ENOMEM; 2687 2688 dev->vlans = devm_kcalloc(dev->dev, 2689 dev->num_vlans, sizeof(struct b53_vlan), 2690 GFP_KERNEL); 2691 if (!dev->vlans) 2692 return -ENOMEM; 2693 2694 dev->reset_gpio = b53_switch_get_reset_gpio(dev); 2695 if (dev->reset_gpio >= 0) { 2696 ret = devm_gpio_request_one(dev->dev, dev->reset_gpio, 2697 GPIOF_OUT_INIT_HIGH, "robo_reset"); 2698 if (ret) 2699 return ret; 2700 } 2701 2702 return 0; 2703 } 2704 2705 struct b53_device *b53_switch_alloc(struct device *base, 2706 const struct b53_io_ops *ops, 2707 void *priv) 2708 { 2709 struct dsa_switch *ds; 2710 struct b53_device *dev; 2711 2712 ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL); 2713 if (!ds) 2714 return NULL; 2715 2716 ds->dev = base; 2717 2718 dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL); 2719 if (!dev) 2720 return NULL; 2721 2722 ds->priv = dev; 2723 dev->dev = base; 2724 2725 dev->ds = ds; 2726 dev->priv = priv; 2727 dev->ops = ops; 2728 ds->ops = &b53_switch_ops; 2729 dev->vlan_enabled = true; 2730 /* Let DSA handle the case were multiple bridges span the same switch 2731 * device and different VLAN awareness settings are requested, which 2732 * would be breaking filtering semantics for any of the other bridge 2733 * devices. (not hardware supported) 2734 */ 2735 ds->vlan_filtering_is_global = true; 2736 2737 mutex_init(&dev->reg_mutex); 2738 mutex_init(&dev->stats_mutex); 2739 mutex_init(&dev->arl_mutex); 2740 2741 return dev; 2742 } 2743 EXPORT_SYMBOL(b53_switch_alloc); 2744 2745 int b53_switch_detect(struct b53_device *dev) 2746 { 2747 u32 id32; 2748 u16 tmp; 2749 u8 id8; 2750 int ret; 2751 2752 ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8); 2753 if (ret) 2754 return ret; 2755 2756 switch (id8) { 2757 case 0: 2758 /* BCM5325 and BCM5365 do not have this register so reads 2759 * return 0. But the read operation did succeed, so assume this 2760 * is one of them. 2761 * 2762 * Next check if we can write to the 5325's VTA register; for 2763 * 5365 it is read only. 2764 */ 2765 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf); 2766 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp); 2767 2768 if (tmp == 0xf) 2769 dev->chip_id = BCM5325_DEVICE_ID; 2770 else 2771 dev->chip_id = BCM5365_DEVICE_ID; 2772 break; 2773 case BCM5389_DEVICE_ID: 2774 case BCM5395_DEVICE_ID: 2775 case BCM5397_DEVICE_ID: 2776 case BCM5398_DEVICE_ID: 2777 dev->chip_id = id8; 2778 break; 2779 default: 2780 ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32); 2781 if (ret) 2782 return ret; 2783 2784 switch (id32) { 2785 case BCM53115_DEVICE_ID: 2786 case BCM53125_DEVICE_ID: 2787 case BCM53128_DEVICE_ID: 2788 case BCM53010_DEVICE_ID: 2789 case BCM53011_DEVICE_ID: 2790 case BCM53012_DEVICE_ID: 2791 case BCM53018_DEVICE_ID: 2792 case BCM53019_DEVICE_ID: 2793 case BCM53134_DEVICE_ID: 2794 dev->chip_id = id32; 2795 break; 2796 default: 2797 dev_err(dev->dev, 2798 "unsupported switch detected (BCM53%02x/BCM%x)\n", 2799 id8, id32); 2800 return -ENODEV; 2801 } 2802 } 2803 2804 if (dev->chip_id == BCM5325_DEVICE_ID) 2805 return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25, 2806 &dev->core_rev); 2807 else 2808 return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID, 2809 &dev->core_rev); 2810 } 2811 EXPORT_SYMBOL(b53_switch_detect); 2812 2813 int b53_switch_register(struct b53_device *dev) 2814 { 2815 int ret; 2816 2817 if (dev->pdata) { 2818 dev->chip_id = dev->pdata->chip_id; 2819 dev->enabled_ports = dev->pdata->enabled_ports; 2820 } 2821 2822 if (!dev->chip_id && b53_switch_detect(dev)) 2823 return -EINVAL; 2824 2825 ret = b53_switch_init(dev); 2826 if (ret) 2827 return ret; 2828 2829 dev_info(dev->dev, "found switch: %s, rev %i\n", 2830 dev->name, dev->core_rev); 2831 2832 return dsa_register_switch(dev->ds); 2833 } 2834 EXPORT_SYMBOL(b53_switch_register); 2835 2836 MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>"); 2837 MODULE_DESCRIPTION("B53 switch library"); 2838 MODULE_LICENSE("Dual BSD/GPL"); 2839