1# SPDX-License-Identifier: GPL-2.0-only 2menu "Distributed Switch Architecture drivers" 3 depends on NET_DSA 4 5source "drivers/net/dsa/b53/Kconfig" 6 7config NET_DSA_BCM_SF2 8 tristate "Broadcom Starfighter 2 Ethernet switch support" 9 depends on HAS_IOMEM 10 select NET_DSA_TAG_BRCM 11 select FIXED_PHY 12 select BCM7XXX_PHY 13 select MDIO_BCM_UNIMAC 14 select B53 15 help 16 This enables support for the Broadcom Starfighter 2 Ethernet 17 switch chips. 18 19config NET_DSA_LOOP 20 tristate "DSA mock-up Ethernet switch chip support" 21 select NET_DSA_TAG_NONE 22 select FIXED_PHY 23 help 24 This enables support for a fake mock-up switch chip which 25 exercises the DSA APIs. 26 27source "drivers/net/dsa/hirschmann/Kconfig" 28 29config NET_DSA_LANTIQ_GSWIP 30 tristate "Lantiq / Intel GSWIP" 31 depends on HAS_IOMEM 32 select NET_DSA_TAG_GSWIP 33 help 34 This enables support for the Lantiq / Intel GSWIP 2.1 found in 35 the xrx200 / VR9 SoC. 36 37config NET_DSA_MT7530 38 tristate "MediaTek MT7530 and MT7531 Ethernet switch support" 39 select NET_DSA_TAG_MTK 40 imply NET_DSA_MT7530_MDIO 41 imply NET_DSA_MT7530_MMIO 42 help 43 This enables support for the MediaTek MT7530 and MT7531 Ethernet 44 switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT, 45 MT7621ST and MT7623AI SoCs, and built-in switch in MT7988 SoC are 46 supported as well. 47 48config NET_DSA_MT7530_MDIO 49 tristate "MediaTek MT7530 MDIO interface driver" 50 depends on NET_DSA_MT7530 51 select MEDIATEK_GE_PHY 52 select PCS_MTK_LYNXI 53 help 54 This enables support for the MediaTek MT7530 and MT7531 switch 55 chips which are connected via MDIO, as well as multi-chip 56 module MT7530 which can be found in the MT7621AT, MT7621DAT, 57 MT7621ST and MT7623AI SoCs. 58 59config NET_DSA_MT7530_MMIO 60 tristate "MediaTek MT7530 MMIO interface driver" 61 depends on NET_DSA_MT7530 62 depends on HAS_IOMEM 63 imply MEDIATEK_GE_SOC_PHY 64 help 65 This enables support for the built-in Ethernet switch found 66 in the MediaTek MT7988 SoC. 67 The switch is a similar design as MT7531, but the switch registers 68 are directly mapped into the SoCs register space rather than being 69 accessible via MDIO. 70 71config NET_DSA_MV88E6060 72 tristate "Marvell 88E6060 ethernet switch chip support" 73 select NET_DSA_TAG_TRAILER 74 help 75 This enables support for the Marvell 88E6060 ethernet switch 76 chip. 77 78source "drivers/net/dsa/microchip/Kconfig" 79 80source "drivers/net/dsa/mv88e6xxx/Kconfig" 81 82source "drivers/net/dsa/ocelot/Kconfig" 83 84source "drivers/net/dsa/qca/Kconfig" 85 86source "drivers/net/dsa/sja1105/Kconfig" 87 88source "drivers/net/dsa/xrs700x/Kconfig" 89 90source "drivers/net/dsa/realtek/Kconfig" 91 92config NET_DSA_RZN1_A5PSW 93 tristate "Renesas RZ/N1 A5PSW Ethernet switch support" 94 depends on OF && ARCH_RZN1 95 select NET_DSA_TAG_RZN1_A5PSW 96 select PCS_RZN1_MIIC 97 help 98 This driver supports the A5PSW switch, which is embedded in Renesas 99 RZ/N1 SoC. 100 101config NET_DSA_SMSC_LAN9303 102 tristate 103 select NET_DSA_TAG_LAN9303 104 select REGMAP 105 imply SMSC_PHY 106 help 107 This enables support for the Microchip LAN9303/LAN9354 3 port ethernet 108 switch chips. 109 110config NET_DSA_SMSC_LAN9303_I2C 111 tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode" 112 depends on I2C 113 depends on VLAN_8021Q || VLAN_8021Q=n 114 select NET_DSA_SMSC_LAN9303 115 select REGMAP_I2C 116 help 117 Enable access functions if the SMSC/Microchip LAN9303 is configured 118 for I2C managed mode. 119 120config NET_DSA_SMSC_LAN9303_MDIO 121 tristate "Microchip LAN9303/LAN9354 3-ports 10/100 ethernet switch in MDIO managed mode" 122 select NET_DSA_SMSC_LAN9303 123 depends on VLAN_8021Q || VLAN_8021Q=n 124 help 125 Enable access functions if the Microchip LAN9303/LAN9354 is configured 126 for MDIO managed mode. 127 128config NET_DSA_VITESSE_VSC73XX 129 tristate 130 select NET_DSA_TAG_VSC73XX_8021Q 131 select FIXED_PHY 132 select VITESSE_PHY 133 select GPIOLIB 134 help 135 This enables support for the Vitesse VSC7385, VSC7388, 136 VSC7395 and VSC7398 SparX integrated ethernet switches. 137 138config NET_DSA_VITESSE_VSC73XX_SPI 139 tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support" 140 depends on SPI 141 select NET_DSA_VITESSE_VSC73XX 142 help 143 This enables support for the Vitesse VSC7385, VSC7388, VSC7395 144 and VSC7398 SparX integrated ethernet switches in SPI managed mode. 145 146config NET_DSA_VITESSE_VSC73XX_PLATFORM 147 tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support" 148 depends on HAS_IOMEM 149 select NET_DSA_VITESSE_VSC73XX 150 help 151 This enables support for the Vitesse VSC7385, VSC7388, VSC7395 152 and VSC7398 SparX integrated ethernet switches, connected over 153 a CPU-attached address bus and work in memory-mapped I/O mode. 154endmenu 155