1# SPDX-License-Identifier: GPL-2.0-only 2menu "Distributed Switch Architecture drivers" 3 depends on NET_DSA 4 5source "drivers/net/dsa/b53/Kconfig" 6 7config NET_DSA_BCM_SF2 8 tristate "Broadcom Starfighter 2 Ethernet switch support" 9 depends on HAS_IOMEM 10 select NET_DSA_TAG_BRCM 11 select FIXED_PHY 12 select BCM7XXX_PHY 13 select MDIO_BCM_UNIMAC 14 select B53 15 help 16 This enables support for the Broadcom Starfighter 2 Ethernet 17 switch chips. 18 19config NET_DSA_LOOP 20 tristate "DSA mock-up Ethernet switch chip support" 21 select NET_DSA_TAG_NONE 22 select FIXED_PHY 23 help 24 This enables support for a fake mock-up switch chip which 25 exercises the DSA APIs. 26 27source "drivers/net/dsa/hirschmann/Kconfig" 28 29config NET_DSA_LANTIQ_GSWIP 30 tristate "Lantiq / Intel GSWIP" 31 depends on HAS_IOMEM 32 select NET_DSA_TAG_GSWIP 33 help 34 This enables support for the Lantiq / Intel GSWIP 2.1 found in 35 the xrx200 / VR9 SoC. 36 37config NET_DSA_MT7530 38 tristate "MediaTek MT7530 and MT7531 Ethernet switch support" 39 select NET_DSA_TAG_MTK 40 select MEDIATEK_GE_PHY 41 imply NET_DSA_MT7530_MDIO 42 imply NET_DSA_MT7530_MMIO 43 help 44 This enables support for the MediaTek MT7530 and MT7531 Ethernet 45 switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT, 46 MT7621ST and MT7623AI SoCs, and built-in switch in MT7988 SoC are 47 supported as well. 48 49config NET_DSA_MT7530_MDIO 50 tristate "MediaTek MT7530 MDIO interface driver" 51 depends on NET_DSA_MT7530 52 select PCS_MTK_LYNXI 53 help 54 This enables support for the MediaTek MT7530 and MT7531 switch 55 chips which are connected via MDIO, as well as multi-chip 56 module MT7530 which can be found in the MT7621AT, MT7621DAT, 57 MT7621ST and MT7623AI SoCs. 58 59config NET_DSA_MT7530_MMIO 60 tristate "MediaTek MT7530 MMIO interface driver" 61 depends on NET_DSA_MT7530 62 depends on HAS_IOMEM 63 help 64 This enables support for the built-in Ethernet switch found 65 in the MediaTek MT7988 SoC. 66 The switch is a similar design as MT7531, but the switch registers 67 are directly mapped into the SoCs register space rather than being 68 accessible via MDIO. 69 70config NET_DSA_MV88E6060 71 tristate "Marvell 88E6060 ethernet switch chip support" 72 select NET_DSA_TAG_TRAILER 73 help 74 This enables support for the Marvell 88E6060 ethernet switch 75 chip. 76 77source "drivers/net/dsa/microchip/Kconfig" 78 79source "drivers/net/dsa/mv88e6xxx/Kconfig" 80 81source "drivers/net/dsa/ocelot/Kconfig" 82 83source "drivers/net/dsa/qca/Kconfig" 84 85source "drivers/net/dsa/sja1105/Kconfig" 86 87source "drivers/net/dsa/xrs700x/Kconfig" 88 89source "drivers/net/dsa/realtek/Kconfig" 90 91config NET_DSA_RZN1_A5PSW 92 tristate "Renesas RZ/N1 A5PSW Ethernet switch support" 93 depends on OF && ARCH_RZN1 94 select NET_DSA_TAG_RZN1_A5PSW 95 select PCS_RZN1_MIIC 96 help 97 This driver supports the A5PSW switch, which is embedded in Renesas 98 RZ/N1 SoC. 99 100config NET_DSA_SMSC_LAN9303 101 tristate 102 select NET_DSA_TAG_LAN9303 103 select REGMAP 104 help 105 This enables support for the Microchip LAN9303/LAN9354 3 port ethernet 106 switch chips. 107 108config NET_DSA_SMSC_LAN9303_I2C 109 tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode" 110 depends on I2C 111 depends on VLAN_8021Q || VLAN_8021Q=n 112 select NET_DSA_SMSC_LAN9303 113 select REGMAP_I2C 114 help 115 Enable access functions if the SMSC/Microchip LAN9303 is configured 116 for I2C managed mode. 117 118config NET_DSA_SMSC_LAN9303_MDIO 119 tristate "Microchip LAN9303/LAN9354 3-ports 10/100 ethernet switch in MDIO managed mode" 120 select NET_DSA_SMSC_LAN9303 121 depends on VLAN_8021Q || VLAN_8021Q=n 122 help 123 Enable access functions if the Microchip LAN9303/LAN9354 is configured 124 for MDIO managed mode. 125 126config NET_DSA_VITESSE_VSC73XX 127 tristate 128 select NET_DSA_TAG_NONE 129 select FIXED_PHY 130 select VITESSE_PHY 131 select GPIOLIB 132 help 133 This enables support for the Vitesse VSC7385, VSC7388, 134 VSC7395 and VSC7398 SparX integrated ethernet switches. 135 136config NET_DSA_VITESSE_VSC73XX_SPI 137 tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support" 138 depends on SPI 139 select NET_DSA_VITESSE_VSC73XX 140 help 141 This enables support for the Vitesse VSC7385, VSC7388, VSC7395 142 and VSC7398 SparX integrated ethernet switches in SPI managed mode. 143 144config NET_DSA_VITESSE_VSC73XX_PLATFORM 145 tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support" 146 depends on HAS_IOMEM 147 select NET_DSA_VITESSE_VSC73XX 148 help 149 This enables support for the Vitesse VSC7385, VSC7388, VSC7395 150 and VSC7398 SparX integrated ethernet switches, connected over 151 a CPU-attached address bus and work in memory-mapped I/O mode. 152endmenu 153